XLDV20PM-MIB
385 objects
No module-level DESCRIPTION found.
Imported Objects
| AN-MIB | onu |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge TimeTicks |
| SNMPv2-SMI | Unsigned32 |
| XLDV20-MIB | -- -------------------------------------------------------------- -- I m p o r t s from X L D V 2 0 - M I B -- -------------------------------------------------------------- Xldv20ControlStatus Unsigned16 Xldv20AdminState Xldv20FlowDirection xldv20IfIndex xldv20Traps xldv20TvTimeAndDate |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231.7.1.2.1.1.4.10.200 | Nodexldv20pmTrThresholdCrossingAlert | Threshold crossing alert for PM on physical layer. | ||
| 1.3.6.1.4.1.231.7.1.2.1.1.4.10.300 | Nodexldv20pmTrAtmThresholdCrossingAlert | Threshold crossing alert for PM on ATM layer . | ||
| 1.3.6.1.4.1.231.7.1.2.1.1.4.10.302 | Nodexldv20pmTrAtmObjectCreation | An Atm object is created. | ||
| 1.3.6.1.4.1.231.7.1.2.1.1.4.10.303 | Nodexldv20pmTrAtmObjectDeletion | An Atm object is deleted. | ||
| 1.3.6.1.4.1.231.7.1.2.1.1.4.10.304 | Nodexldv20pmTrAtmEndpointObjectCreation | An Atm endpoint object is created. | ||
| 1.3.6.1.4.1.231.7.1.2.1.1.4.10.305 | Nodexldv20pmTrAtmEndpointObjectDeletion | An Atm endpoint object is deleted. | ||
| 1.3.6.1.4.1.231.7.1.2.1.1.5 | Nodexldv20Pm | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1 | Nodexldv20pmPerformanceManagementControl | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1 | Nodexldv20pmControl | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.1 | Scalarxldv20pmCoIfIndex | read-write | mandatory | This attribute provides the interface index of the PM object for which PM parameters are configured . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.2 | Scalarxldv20pmCoNrHistEntriesSize | read-write | mandatory | This attribute is used to set the number of 15 minutes history entries which should be stored for history collection. Default value is 1. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.3 | Scalarxldv20pmCoIntervalType | read-write | mandatory | This attribute identifies whether a 15 minutes interval or a day interval is selected in case of a resetIndividCurrent command. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.4 | Scalarxldv20pmCoControlReq | read-write | mandatory | This attribute identifies a control command given by the SNMP agent. A reset for any individual PM object is possible via command resetIndividCurrent. The comm… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.5 | Scalarxldv20pmCoControlStatus | read-only | mandatory | The status of a control request. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.6 | Scalarxldv20pmCoRemainingHistoryEntriesSize | read-only | mandatory | This attribute indicates the number of remaining history entries which are available for the 15 minutes history collection wthin the ONU. PM on physical and AT… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.7 | Scalarxldv20pmCoOAMLevel | read-write | mandatory | This attribute selects the OAM level f1 (1), f2 (2), f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.8 | Scalarxldv20pmCoControlReqResult | read-only | mandatory | The result of the last user command. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.9 | Scalarxldv20pmCoControlTimeStamp | read-only | mandatory | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2 | Nodexldv20pmAtmControl | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.1 | Scalarxldv20pmAcoIndex | read-write | mandatory | This attribute provides the index of the AtmPm object for which PM parameters shall be configured . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.2 | Scalarxldv20pmAcoNrHistEntriesSize | read-write | mandatory | This attribute is used to set the number of 15 minutes history entries which should be stored for history collection. The set HistEntrySize value is found in t… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.3 | Scalarxldv20pmAcoIntervalType | read-write | mandatory | This attribute identifies whether a 15 minutes interval or a day interval is selected in case of a resetIndividCurrent command. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.4 | Scalarxldv20pmAcoControlReq | read-write | mandatory | This attribute identifies a control command given by the SNMP agent. A reset for any individual PM object is possible via command resetIndividCurrent. The comm… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.5 | Scalarxldv20pmAcoControlStatus | read-only | mandatory | The status of a control request. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.6 | Scalarxldv20pmAcoRemainingHistoryEntriesSize | read-only | mandatory | This attribute indicates the number of remaining history entries which are available for the 15 minutes history collection within the ONU. PM on physical and A… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.7 | Scalarxldv20pmAcoFlowType | read-write | mandatory | This attribute identifies the flow type : F4 (VP) or F5 (VC) segment or endToEnd flow. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.8 | Scalarxldv20pmAcoFlowDirection | read-write | mandatory | The flow direction of OAM cells. 'inwards' means flow direction from outside (external interface) to cross connection. 'outwards' means flow direction from ins… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.9 | Scalarxldv20pmAcoConnectionIndex | read-write | mandatory | This attribute identifies the index of a Vpl or Vcl cross connection. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.10 | Scalarxldv20pmAcoConnectionIndexType | read-write | mandatory | This attribute identifies the type of connection index and the termination point. It is in case of vplUni/vplNni : index of Vpl CC (xldv20AccVpiNniIndex) vclUn… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.12 | Scalarxldv20pmAcoRole | read-write | mandatory | The role of endpoint. 'analyseWithBackwardReporting' (sink) means extracting forward monitoring (FM) OAM cells, sending back backward reporting OAM cells and n… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.13 | Scalarxldv20pmAcoEndpointType | read-write | mandatory | Identifies the type of endpoint. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.14 | Scalarxldv20pmAcoControlReqResult | read-only | mandatory | The result of the last user command. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.15 | Scalarxldv20pmAcoControlTimeStamp | read-only | mandatory | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2 | Nodexldv20pmPerformanceMonitoring | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2 | Tablexldv20pmCommonCurrentTable | not-accessible | mandatory | This table contains the entries for the current 15 minute interval or the current day of PMo objects of the common group. (adc, adr, e3n and e3f) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1 | Rowxldv20pmCommonCurrentEntry | not-accessible | mandatory | An entry describing the Common Current Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.1 | Columnxldv20pmCcIntervalType | read-only | mandatory | This attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.2 | Columnxldv20pmCcOAMLevel | read-only | mandatory | This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.3 | Columnxldv20pmCcAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.4 | Columnxldv20pmCcSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.5 | Columnxldv20pmCcHistEntrySize | read-only | mandatory | The number of 15min history entries configured at the particular interface. This attribute is used for history data collection. The default value is 1 and mean… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.6 | Columnxldv20pmCcNrHistEntriesAvailable | read-only | mandatory | This read-only attribute indicates how many HistEntries are already available. The range of values is between 0 and xldv20pmCcHistEntrySize, thereby 0 means th… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.7 | Columnxldv20pmCcElapsedTime | read-only | mandatory | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.8 | Columnxldv20pmCcThresholdLimitIndex | read-write | mandatory | This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reporte… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.9 | Columnxldv20pmCcNeErroredSeconds | read-only | mandatory | A near end counter of Errored Seconds (ES) over a 15 min/day interval. Counter appearence depends on interface type and OAM level : - adc, e3n: valid for F3 le… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.10 | Columnxldv20pmCcFeErroredSeconds | read-only | mandatory | A far end counter of Errored Seconds (ES) over a 15 min /day interval. Counter appearence depends on interface type and OAM level : - adr, e3f: valid for F3 le… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.11 | Columnxldv20pmCcNeSeverelyErroredSeconds | read-only | mandatory | Represents a near end counter of Severely Errored Seconds (SES) over a 15 min /day interval. Counter appearence depends on interface type and OAM level : - adc… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.12 | Columnxldv20pmCcFeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a far end counter of Severely Errored Seconds (SES) over a 15 min /day interval. Counter appearence depends on interface ty… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.13 | Columnxldv20pmCcNeBackgroundBlockErrors | read-only | mandatory | This read-only attribute represents a near end counter for Background Block Errors (BBE) over a 15 min /day interval. Counter appearence depends on interface t… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.14 | Columnxldv20pmCcFeBackgroundBlockErrors | read-only | mandatory | This read-only attribute represents a far end counter for Background Block Errors (BBE) over a 15 min /day interval. Counter appearence depends on interface ty… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.15 | Columnxldv20pmCcNeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : adc, … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.16 | Columnxldv20pmCcFeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a far end counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3 | Tablexldv20pmCommonHistoryTable | not-accessible | mandatory | This table contains the entries for the PMo objects of the 15 min /one day-history data collection results at the respective adc, adr drop area interfaces . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1 | Rowxldv20pmCommonHistoryEntry | not-accessible | mandatory | An entry describing the Common History Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.1 | Columnxldv20pmChIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.2 | Columnxldv20pmChOAMLevel | read-only | mandatory | This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.3 | Columnxldv20pmChHistEntryNr | read-only | mandatory | This attribute is an index used to address the PM history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xld… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.4 | Columnxldv20pmChSuspectFlag | read-only | mandatory | Will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.5 | Columnxldv20pmChPeriodEndTime | read-only | mandatory | Date/time at the end of the selected interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.6 | Columnxldv20pmChNeErroredSeconds | read-only | mandatory | This read-only attribute represents a near end counter of Errored Seconds (ES) over a 15 min /day interval. Counter applicable for : adc, e3n and F3 level . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.7 | Columnxldv20pmChFeErroredSeconds | read-only | mandatory | This read-only attribute represents a far end counter of Errored Seconds (ES) within the current 15 minute interval or current day. Counter applicable for : ad… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.8 | Columnxldv20pmChNeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a near end counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day. Counter applicab… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.9 | Columnxldv20pmChFeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a far end counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day. Counter applicabl… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.10 | Columnxldv20pmChNeBackgroundBlockErrors | read-only | mandatory | This read-only attribute represents a near end counter for Background Block Errors (BBE) over a 15 min /day interval. Counter applicable for : adc, e3n and F3 … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.11 | Columnxldv20pmChFeBackgroundBlockErrors | read-only | mandatory | This read-only attribute represents a far end counter for Background Block Errors (BBE) over a 15 min /day interval. Counter applicable for : adr, e3n and F3 l… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.12 | Columnxldv20pmChNeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a near end counter of Unavailable Seconds (UAS) for a 15 min /day interval. Counter applicable for : adc, e3n and F3 level . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.13 | Columnxldv20pmChFeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a far end counter of Unavailable Seconds (UAS) for a 15 min /day interval. Counter applicable for : adr, e3f and F3 level . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4 | Tablexldv20pmS3CurrentTable | not-accessible | mandatory | This table contains the entries for the current 15 minute interval or the current day for STS3c near-end and far-end PPTPs. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1 | Rowxldv20pmS3CurrentEntry | not-accessible | mandatory | An entry describing the STS3 near-end and far-end Current Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.1 | Columnxldv20pmS3cIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.2 | Columnxldv20pmS3cOAMLevel | read-only | mandatory | This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.3 | Columnxldv20pmS3cAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.4 | Columnxldv20pmS3cSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.5 | Columnxldv20pmS3cHistEntrySize | read-only | mandatory | This read-only attribute indicates the number of 15min history entries configured at the particular interface. The default value is 1 and means that at least o… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.6 | Columnxldv20pmS3cNrHistEntriesAvailable | read-only | mandatory | This read-only attribute indicates how many history entries are already available. The range of values is between 0 and xldv20S3cHistEntrySize, thereby 0 means… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.7 | Columnxldv20pmS3cElapsedTime | read-only | mandatory | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.8 | Columnxldv20pmS3cThresholdLimitIndex | read-write | mandatory | This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reporte… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.9 | Columnxldv20pmS3cNeErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds (ES) within the current 15min interval or current day. Counter applicable for : s3n and F1, F2… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.10 | Columnxldv20pmS3cFeErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds (ES) within the current 15min interval or current day. Counter applicable for : s3f and F2 and… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.11 | Columnxldv20pmS3cNeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15min interval or current day. Counter applicable for : s3n … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.12 | Columnxldv20pmS3cFeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15min interval or current day. Counter applicable for : s3f … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.13 | Columnxldv20pmS3cNeCodeViolations | read-only | mandatory | This read-only attribute represents a counter of Code Violations Errors within the current 15min interval or current day. Counter applicable for : s3n and F1, … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.14 | Columnxldv20pmS3cFeCodeViolations | read-only | mandatory | This read-only attribute represents a counter of Code Violations Errors within the current 15min interval or current day. Counter applicable for : s3f and F2 a… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.15 | Columnxldv20pmS3cNeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15min interval or current day. Counter applicable for : s3n and F… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.16 | Columnxldv20pmS3cFeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15min interval or current day. Counter applicable for : s3f and l… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.17 | Columnxldv20pmS3cNeSeverelyErroredFrameSeconds | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Frame Seconds within the current 15min interval or current day. Counter applicable for : s3n … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5 | Tablexldv20pmS3HistoryTable | not-accessible | mandatory | This table contains the entries for the PMo history objects at the near-end and far-end STS3c interfaces. It contains results that are overtaken from the s3Cur… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1 | Rowxldv20pmS3HistoryEntry | not-accessible | mandatory | An entry describing the STS3 near-end and far-end History Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.1 | Columnxldv20pmS3hIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.2 | Columnxldv20pmS3hOAMLevel | read-only | mandatory | This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.3 | Columnxldv20pmS3hHistEntryNr | read-only | mandatory | This attribute is used as index to address the history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.4 | Columnxldv20pmS3hSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.5 | Columnxldv20pmS3hPeriodEndTime | read-only | mandatory | This read-only attribute is a record of date/time at the end of an interval . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.6 | Columnxldv20pmS3hNeErroredSeconds | read-only | mandatory | This read-only attribute represents a set of history counter for Errored Seconds (ES) for the passed up to 96 periods of 15 minutes and the passed day interval… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.7 | Columnxldv20pmS3hFeErroredSeconds | read-only | mandatory | This read-only attribute represents a set of history counter for Errored Seconds (ES) for the passed up to 96 periods of 15 minutes and the passed day interval… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.8 | Columnxldv20pmS3hNeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a set of history counter for Severely Errored Seconds (SES) for the passed up to 96 periods of 15 minutes and the passed da… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.9 | Columnxldv20pmS3hFeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a set of history counter for Severely Errored Seconds (SES) for the passed up to 96 periods of 15 minutes and the passed da… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.10 | Columnxldv20pmS3hNeCodeViolations | read-only | mandatory | This read-only attribute represents a set of history counter for Code Violations Errors for the passed up to 96 periods of 15 minutes and the passed day interv… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.11 | Columnxldv20pmS3hFeCodeViolations | read-only | mandatory | This read-only attribute represents a set of history counter for Code Violations Errors for the passed up to 96 periods of 15 minutes and the passed day interv… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.12 | Columnxldv20pmS3hNeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a set of history counter for Unavailable Seconds (UAS) for the passed up to 96 periods of 15 minutes and the passed day int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.13 | Columnxldv20pmS3hFeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a set of history counter for Unavailable Seconds (UAS) for the passed up to 96 periods of 15 minutes and the passed day int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.14 | Columnxldv20pmS3hNeSeverelyErroredFrameSeconds | read-only | mandatory | This read-only attribute represents a set of history counter for Severely Errored Frame Seconds for the passed up to 96 periods of 15 minutes and the passed da… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6 | Tablexldv20pmD3CurrentTable | not-accessible | mandatory | This table contains the entries for the current 15 minute interval or the current day for DS3 near-end and far-end PPTPs. Note: Day PM collection uses the 15mi… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1 | Rowxldv20pmD3CurrentEntry | not-accessible | mandatory | An entry describing the DS3 near-end and far-end Current Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.1 | Columnxldv20pmD3cIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.2 | Columnxldv20pmD3cOAMLevel | read-only | mandatory | This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.3 | Columnxldv20pmD3cAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.4 | Columnxldv20pmD3cSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.5 | Columnxldv20pmD3cHistEntrySize | read-only | mandatory | This read-only attribute indicates the configured history size. The default value is 1 and means that at least one history entry is provided. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.6 | Columnxldv20pmD3cNrHistEntriesAvailable | read-only | mandatory | This read-only attribute indicates how many history entries are already available. The range of values is between 0 and xldv20pmD3cHistEntrySize, thereby 0 mea… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.7 | Columnxldv20pmD3cElapsedTime | read-only | mandatory | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.8 | Columnxldv20pmD3cThresholdLimitIndex | read-write | mandatory | This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reporte… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.9 | Columnxldv20pmD3cNeErroredSecondsCP | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds (ES) within the current interval or current day, the generation thereof is based on CP-bit par… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.10 | Columnxldv20pmD3cFeErroredSecondsCP | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds (ES) within the current 15 minute interval or current day, the generation thereof is based on … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.11 | Columnxldv20pmD3cNeErroredSecondsPLCP | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds on PLCP-bit parity within the current 15 minute interval or current day. Counter applicable fo… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.12 | Columnxldv20pmD3cFeErroredSecondsPLCP | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds on PLCP-bit parity within the current 15 minute interval or current day. Counter applicable fo… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.13 | Columnxldv20pmD3cNeSeverelyErroredSecondsCP | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day based on CP-bit parity, th… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.14 | Columnxldv20pmD3cFeSeverelyErroredSecondsCP | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day, the generation thereof is… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.15 | Columnxldv20pmD3cNeSeverelyErroredSecondsPLCP | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day, the generation thereof is… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.16 | Columnxldv20pmD3cFeSeverelyErroredSecondsPLCP | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day, the generation thereof is… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.17 | Columnxldv20pmD3cNeCodeViolationsP | read-only | mandatory | This read-only attribute represents a counter of Code Violations Errors (Count of P-bit parity errors) within the current 15 minute interval or current day. Co… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.18 | Columnxldv20pmD3cNeCodeViolationsCP | read-only | mandatory | This read-only attribute represents a counter of Code Violations Errors (Count of CP-bit parity errors) within the current 15 minute interval or current day. C… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.19 | Columnxldv20pmD3cFeCodeViolationsCP | read-only | mandatory | This read-only attribute represents a counter of Code Violations Errors (Count of CP-bit parity errors) within the current 15 minute interval or current day. C… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.20 | Columnxldv20pmD3cNeCodeViolationsPLCP | read-only | mandatory | This read-only attribute represents a counter of Code Violations Errors (Count of PLCP frame Bit Interleaved Parity errors) within the current 15 minute interv… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.21 | Columnxldv20pmD3cFeCodeViolationsPLCP | read-only | mandatory | This read-only attribute represents a counter of Code Violations Errors (Count of PLCP frame Bit Interleaved Parity errors) within the current 15 minute interv… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.22 | Columnxldv20pmD3cNeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : d3n a… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.23 | Columnxldv20pmD3cFeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : d3f a… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.24 | Columnxldv20pmD3cNeUnavailableSecondsPLCP | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. The generation is based on PLC… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.25 | Columnxldv20pmD3cFeUnavailableSecondsPLCP | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. The generation is based on PLC… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.26 | Columnxldv20pmD3cNeSas | read-only | mandatory | This read-only attribute represents a counter of one second intervals containing one ore more Severely Errored Frame (SEF) defects or one or more Alarm Indicat… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.27 | Columnxldv20pmD3cFeSas | read-only | mandatory | This read-only attribute represents a counter of one second intervals containing one ore more Severely Errored Frame (SEF) defects or one or more Alarm Indicat… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7 | Tablexldv20pmD3HistoryTable | not-accessible | mandatory | This table contains the entries for the PMo history objects at the near-end and far-end DS3 interfaces. It contains results that are overtaken from the D3Curre… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1 | Rowxldv20pmD3HistoryEntry | not-accessible | mandatory | An entry describing the DS3 near-end and far-end History Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.1 | Columnxldv20pmD3hIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.2 | Columnxldv20pmD3hOAMLevel | read-only | mandatory | This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.3 | Columnxldv20pmD3hHistEntryNr | read-only | mandatory | This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pm… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.4 | Columnxldv20pmD3hSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.5 | Columnxldv20pmD3hPeriodEndTime | read-only | mandatory | This read-only attribute is a record of date/time at the end of an interval . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.6 | Columnxldv20pmD3hNeErroredSecondsCP | read-only | mandatory | This read-only attribute represents a set of history counter of Errored Seconds (ES), the generation thereof is based on CP-bit parity for a 15min /day interva… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.7 | Columnxldv20pmD3hFeErroredSecondsCP | read-only | mandatory | This read-only attribute represents a set of history counter of Errored Seconds (ES), the generation thereof is based on CP-bit parity for a 15min /day interva… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.8 | Columnxldv20pmD3hNeErroredSecondsPLCP | read-only | mandatory | This read-only attribute represents a set of history counter of Errored Seconds (ES) (One second interval in which Code Violations errors occure) for a 15min /… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.9 | Columnxldv20pmD3hFeErroredSecondsPLCP | read-only | mandatory | This read-only attribute represents a set of history counter of Errored Seconds (ES) (One second interval in which Code Violations errors occure) for a 15min /… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.10 | Columnxldv20pmD3hNeSeverelyErroredSecondsCP | read-only | mandatory | This read-only attribute represents a set of history counter of Severely Errored Seconds (ES), the generation thereof is based on CP-bit parity for a 15min /da… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.11 | Columnxldv20pmD3hFeSeverelyErroredSecondsCP | read-only | mandatory | This read-only attribute represents a set of history counter of Severely Errored Seconds (ES), the generation thereof is based on CP-bit parity for a 15min /da… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.12 | Columnxldv20pmD3hNeSeverelyErroredSecondsPLCP | read-only | mandatory | This read-only attribute represents a set of history counter of Severely Errored Seconds (SES) for a 15min / day interval. Counter applicable for : d3n and F3 … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.13 | Columnxldv20pmD3hFeSeverelyErroredSecondsPLCP | read-only | mandatory | This read-only attribute represents a set of history counter of Severely Errored Seconds (SES) for a 15min / day interval. Counter applicable for : d3f and F3 … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.14 | Columnxldv20pmD3hNeCodeViolationsP | read-only | mandatory | This read-only attribute represents a counter of Code Violations Errors (Count of P-bit parity errors) for a 15 min /day interval. Counter applicable for : d3n… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.15 | Columnxldv20pmD3hNeCodeViolationsCP | read-only | mandatory | This read-only attribute represents a set of history counter of Code Violations Errors (Count of CP-bit parity errors) for a 15min /day interval. Counter appli… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.16 | Columnxldv20pmD3hFeCodeViolationsCP | read-only | mandatory | This read-only attribute represents a set of history counter of Code Violations Errors (Count of CP-bit parity errors) for a 15min /day interval. Counter appli… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.17 | Columnxldv20pmD3hNeCodeViolationsPLCP | read-only | mandatory | This read-only attribute represents a set of history counter of Code Violations Errors (Count of PLCP frame Bit Interleaved Parity errors) for a 15min /day int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.18 | Columnxldv20pmD3hFeCodeViolationsPLCP | read-only | mandatory | This read-only attribute represents a set of history counter of Code Violations Errors (Count of PLCP frame Bit Interleaved Parity errors) for a 15min /day int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.19 | Columnxldv20pmD3hNeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a set of history counter of Unavailable Seconds (UAS) for a 15min /day interval. Counter applicable for : d3n and F2 level … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.20 | Columnxldv20pmD3hFeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a set of history counter of Unavailable Seconds (UAS) for a 15min /day interval. Counter applicable for : d3f and F2 level … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.21 | Columnxldv20pmD3hNeUnavailableSecondsPLCP | read-only | mandatory | This read-only attribute represents a set of history counter of Unavailable Seconds (UAS) for a 15min /day interval. Counter applicable for : d3n and F3 level … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.22 | Columnxldv20pmD3hFeUnavailableSecondsPLCP | read-only | mandatory | This read-only attribute represents a set of history counter of Unavailable Seconds (UAS) for a 15min /day interval. Counter applicable for : d3f and F3 level … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.23 | Columnxldv20pmD3hNeSas | read-only | mandatory | This read-only attribute represents a set of history counter of one second intervals containing one ore more Severely Errored Frame (SEF) defects or one or mor… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.24 | Columnxldv20pmD3hFeSas | read-only | mandatory | This read-only attribute represents a set of history counter of one second intervals containing one ore more Severely Errored Frame (SEF) defects or one or mor… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8 | Tablexldv20pmS1CurrentTable | not-accessible | mandatory | This table contains the entries for the current 15 minute interval or the current day for STM1 near-end and far-end PPTPs. Note: Day PM collection uses the 15m… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1 | Rowxldv20pmS1CurrentEntry | not-accessible | mandatory | An entry describing the Stm1 Current Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.1 | Columnxldv20pmS1cIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.2 | Columnxldv20pmS1cOAMLevel | read-only | mandatory | This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.3 | Columnxldv20pmS1cAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.4 | Columnxldv20pmS1cSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.5 | Columnxldv20pmS1cHistEntrySize | read-only | mandatory | This read-only attribute indicates the configured history size. The default value is 1 and means that at least one history entry is provided. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.6 | Columnxldv20pmS1cNrHistEntriesAvailable | read-only | mandatory | This read-only attribute indicates how many history entries are already available. The range of values is between 0 and xldv20pmS1cHistEntrySize, thereby 0 mea… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.7 | Columnxldv20pmS1cElapsedTime | read-only | mandatory | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.8 | Columnxldv20pmS1cThresholdLimitIndex | read-write | mandatory | This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reporte… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.9 | Columnxldv20pmS1cNeErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds (ES) within the current 15 minute interval or current day. Counter applicable for : s1n and F1… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.10 | Columnxldv20pmS1cFeErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds (ES) within the current 15 minute interval or current day. Counter applicable for : s1f and F2… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.11 | Columnxldv20pmS1cNeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day. Counter applicable for : … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.12 | Columnxldv20pmS1cFeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day. Counter applicable for : … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.13 | Columnxldv20pmS1cNeBackgroundBlockErrors | read-only | mandatory | This read-only attribute represents a counter for Background Block Errors (BBE) within the current 15 minute interval or current day. Counter applicable for : … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.14 | Columnxldv20pmS1cFeBackgroundBlockErrors | read-only | mandatory | This read-only attribute represents a counter for Background Block Errors (BBE) within the current 15 minute interval or current day. Counter applicable for : … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.15 | Columnxldv20pmS1cNeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : s1n a… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.16 | Columnxldv20pmS1cFeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : s1f a… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.17 | Columnxldv20pmS1cNeOfsSeconds | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds on defect OFS within the current 15 minute interval or current day. Counter applicable for : s… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.18 | Columnxldv20pmS1cNeAisSeconds | read-only | mandatory | This read-only attribute represents a counter of errored Seconds on defect alarm indicatin signal AIS for a 15 min /day interval. Counter applicable for : s1n … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.19 | Columnxldv20pmS1cNeLosSeconds | read-only | mandatory | This read-only attribute represents a counter of errored Seconds on defect LOS within the current 15 minute interval or current day. Counter applicable for : s… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9 | Tablexldv20pmS1HistoryTable | not-accessible | mandatory | This table contains the entries for the PMo objects of the 15 min /one day-history data collection results at the respective stm1 (s1n, s1f) drop area interfac… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1 | Rowxldv20pmS1HistoryEntry | not-accessible | mandatory | An entry describing the S1 History Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.1 | Columnxldv20pmS1hIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.2 | Columnxldv20pmS1hOAMLevel | read-only | mandatory | This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.3 | Columnxldv20pmS1hHistEntryNr | read-only | mandatory | This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pm… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.4 | Columnxldv20pmS1hSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.5 | Columnxldv20pmS1hPeriodEndTime | read-only | mandatory | Date/time at the end of the selected interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.6 | Columnxldv20pmS1hNeErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds (ES) over a 15 min /day interval. Counter applicable for : s1n and F1, F2, F3 levels . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.7 | Columnxldv20pmS1hFeErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds (ES) over a 15 min /day interval. Counter applicable for : s1f and F2 and F3 levels . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.8 | Columnxldv20pmS1hNeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) over a 15 min /day interval. Counter applicable for : s1n and F1, F2, F3 levels… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.9 | Columnxldv20pmS1hFeSeverelyErroredSeconds | read-only | mandatory | This read-only attribute represents a counter of Severely Errored Seconds (SES) over a 15 min /day interval. Counter applicable for : s1f and F2 and F3 levels . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.10 | Columnxldv20pmS1hNeBackgroundBlockErrors | read-only | mandatory | This read-only attribute represents a counter for Background Block Errors (BBE) over a 15 min /day interval. Counter applicable for : s1n and F1, F2, F3 levels… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.11 | Columnxldv20pmS1hFeBackgroundBlockErrors | read-only | mandatory | This read-only attribute represents a counter for Background Block Errors (BBE) over a 15 min /day interval. Counter applicable for : s1f and F2 and F3 levels . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.12 | Columnxldv20pmS1hNeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) for a 15 min /day interval. Counter applicable for : s1n and F1, F2, F3 levels . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.13 | Columnxldv20pmS1hFeUnavailableSeconds | read-only | mandatory | This read-only attribute represents a counter of Unavailable Seconds (UAS) for a 15 min /day interval. Counter applicable for : s1f and F2 and F3 levels . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.14 | Columnxldv20pmS1hNeOfsSeconds | read-only | mandatory | This read-only attribute represents a counter of Errored Seconds on defect OFS for a 15 min /day interval. Counter applicable for : s1n and level F1 . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.15 | Columnxldv20pmS1hNeAisSeconds | read-only | mandatory | This read-only attribute represents a counter of errored Seconds on defect alarm indicatin signal AIS for a 15 min /day interval. Counter applicable for : s1n … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.16 | Columnxldv20pmS1hNeLosSeconds | read-only | mandatory | This read-only attribute represents a counter of errored Seconds on defect LOS for a 15 min /day interval. Counter applicable for : s1n and F1 . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10 | Tablexldv20pmAtmObjectsTable | not-accessible | mandatory | This table contains the entries for the PMo objects on ATM layer. Maximum of monitored connections is 128. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1 | Rowxldv20pmAtmObjectsEntry | not-accessible | mandatory | An entry of the xldv20pmAtmObjectsTable. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1.1 | Columnxldv20pmAoIndex | read-only | mandatory | Identifies an entry of the xldv20pmAtmObjectsTable. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1.2 | Columnxldv20pmAoFlowType | read-only | mandatory | This attribute identifies the flow type : F4 (VP) or F5 (VC) segment or endToEnd flow. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1.3 | Columnxldv20pmAoAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1.4 | Columnxldv20pmAoBlockSize | read-write | mandatory | This is the number of user cells after which PMo cell is inserted. Default is 128. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11 | Tablexldv20pmAtmEndpointsTable | not-accessible | mandatory | This table contains the enpoints for PMo on Atm layer. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1 | Rowxldv20pmAtmEndpointsEntry | not-accessible | mandatory | An entry of xldv20pmAtmEndpointsTable. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.1 | Columnxldv20pmAeEndpointType | read-only | mandatory | Identifies the type of endpoint. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.2 | Columnxldv20pmAeConnectionIndex | read-only | mandatory | This attribute identifies the Vpl or Vcl cross connection where an endpoint object should be added. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.3 | Columnxldv20pmAeConnectionIndexType | read-only | mandatory | This attribute identifies the type of connection index and the termination point where an endpoint should be added. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.4 | Columnxldv20pmAeRole | read-only | mandatory | The role of endpoint. 'analyseWithBackwardReporting' (sink) means extracting forward monitoring (FM) OAM cells, sending back backward reporting OAM cells and n… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.5 | Columnxldv20pmAeFlowDirection | read-only | mandatory | This attribute identifies the flow direction. inwards means flow direction from outside (external interface) to cross connection. outwards means flow direction… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12 | Tablexldv20pmAtmCurrentTable | not-accessible | mandatory | This table contains the entries for the the PMo objects for the current data of Pmo monitoring objects on ATM layer. It includes attributes for performance par… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1 | Rowxldv20pmAtmCurrentEntry | not-accessible | mandatory | An entry describing the Atm Current Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.1 | Columnxldv20pmAcIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.2 | Columnxldv20pmAcAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.3 | Columnxldv20pmAcSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.4 | Columnxldv20pmAcHistEntrySize | read-only | mandatory | This is the configured size of history. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.5 | Columnxldv20pmAcNrHistEntriesAvailable | read-only | mandatory | This is the number of history entries which are available in the history table. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.6 | Columnxldv20pmAcElapsedTime | read-only | mandatory | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.7 | Columnxldv20pmAcThresholdLimitIndex | read-write | mandatory | This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reporte… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.8 | Columnxldv20pmAcTransmittedUserCells | read-only | mandatory | This read-only attribute represents a counter of transmitted user cells for a 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.9 | Columnxldv20pmAcLostUserCells | read-only | mandatory | This read-only attribute represents a counter of lost user cells for a 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.10 | Columnxldv20pmAcMisinsertedUserCells | read-only | mandatory | This read-only attribute represents a counter of Misinserted user cells for a 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13 | Tablexldv20pmAtmHistoryTable | not-accessible | mandatory | This table contains the entries for the 15 min /one day-history data collection results for PMo objects of ATM layer. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1 | Rowxldv20pmAtmHistoryEntry | not-accessible | mandatory | An entry describing the History Data Table for PMo on ATM layer. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.1 | Columnxldv20pmAhIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.2 | Columnxldv20pmAhHistEntryNr | read-only | mandatory | This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pm… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.3 | Columnxldv20pmAhSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.4 | Columnxldv20pmAhPeriodEndTime | read-only | mandatory | Date/time at the end of the selected interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.5 | Columnxldv20pmAhTransmittedUserCells | read-only | mandatory | This read-only attribute represents a counter of transmitted user cells for a 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.6 | Columnxldv20pmAhLostUserCells | read-only | mandatory | This read-only attribute represents a counter of lost user cells for a 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.7 | Columnxldv20pmAhMisinsertedUserCells | read-only | mandatory | This read-only attribute represents a counter of Misinserted user cells for a 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14 | Tablexldv20pmImaGroupCurrentTable | not-accessible | mandatory | This table contains the entries for the PMo objects for the current data of Pmo monitoring objects for IMA groups . Collection interval is the current 15 minut… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1 | Rowxldv20pmImaGroupCurrentEntry | not-accessible | mandatory | An entry describing the current PMo data for ImaGroups. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.1 | Columnxldv20pmImaGroupCurrentIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.2 | Columnxldv20pmImaGroupCurrentAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.3 | Columnxldv20pmImaGroupCurrentSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.4 | Columnxldv20pmImaGroupCurrentHistEntrySize | read-only | mandatory | This is the configured size of history. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.5 | Columnxldv20pmImaGroupCurrentNrHistEntriesAvailable | read-only | mandatory | This is the number of history entries which are available in the history table. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.6 | Columnxldv20pmImaGroupCurrentElapsedTime | read-only | mandatory | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.7 | Columnxldv20pmImaGroupCurrentThresholdLimitIndex | read-write | mandatory | This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reporte… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.8 | Columnxldv20pmImaGroupCurrentUnavailSecs | read-only | mandatory | The counts of second intervals where the IMA group traffic state machine is down in the current for a 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.9 | Columnxldv20pmImaGroupCurrentNeNumFailures | read-only | mandatory | The number of times a near-end group failure (config-Aborted, unsufficient-Links) has been reported for a 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15 | Tablexldv20pmImaGroupHistoryTable | not-accessible | mandatory | This table contains the entries for the 15 min /one day-history data collection results for PMo objects of IMA Group interfaces. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1 | Rowxldv20pmImaGroupHistoryEntry | not-accessible | mandatory | An entry describing the History Data Table for PMo IMA groups. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.1 | Columnxldv20pmImaGroupHistoryIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.2 | Columnxldv20pmImaGroupHistoryHistEntryNr | read-only | mandatory | This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pm… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.3 | Columnxldv20pmImaGroupHistorySuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.4 | Columnxldv20pmImaGroupHistoryPeriodEndTime | read-only | mandatory | Date/time at the end of the selected interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.5 | Columnxldv20pmImaGroupHistoryUnavailSecs | read-only | mandatory | The counts of second intervals where the IMA group traffic state machine is down in the current 15 min /day interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.6 | Columnxldv20pmImaGroupHistoryNeNumFailures | read-only | mandatory | The number of times a near-end group failure (config-Aborted, unsufficient-Links) has been reported for a previous 15 min interval or the previous day. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16 | Tablexldv20pmImaLinkCurrentTable | not-accessible | mandatory | This table contains the entries for the the PMo objects for the current data of Pmo monitoring objects for IMA groups . It includes attributes for performance … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1 | Rowxldv20pmImaLinkCurrentEntry | not-accessible | mandatory | An entry describing the current PMo data for ImaLinks. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.1 | Columnxldv20pmImaLinkCurrentIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.2 | Columnxldv20pmImaLinkCurrentAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.3 | Columnxldv20pmImaLinkCurrentSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.4 | Columnxldv20pmImaLinkCurrentHistEntrySize | read-only | mandatory | This is the configured size of history. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.5 | Columnxldv20pmImaLinkCurrentNrHistEntriesAvailable | read-only | mandatory | This is the number of history entries which are available in the history table. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.6 | Columnxldv20pmImaLinkCurrentElapsedTime | read-only | mandatory | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.7 | Columnxldv20pmImaLinkCurrentThresholdLimitIndex | read-write | mandatory | This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reporte… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.8 | Columnxldv20pmImaLinkCurrentImaViolations | read-only | mandatory | ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in the current 15 minute interval. ATM Forum IMA v… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.9 | Columnxldv20pmImaLinkCurrentOifAnomalies | read-only | mandatory | The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in the current 15 minute interval. This is an optional attribute. ATM… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.10 | Columnxldv20pmImaLinkCurrentNeSevErroredSecs | read-only | mandatory | Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.11 | Columnxldv20pmImaLinkCurrentFeSevErroredSecs | read-only | mandatory | Count of unavailable seconds at near-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset o… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.12 | Columnxldv20pmImaLinkCurrentNeUnavailSecs | read-only | mandatory | Count of unavailable seconds at near-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onse… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.13 | Columnxldv20pmImaLinkCurrentFeUnavailSecs | read-only | mandatory | Count of unavailable seconds at far-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.14 | Columnxldv20pmImaLinkCurrentNeTxUnusableSecs | read-only | mandatory | Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in the current 15 minute interval. ATM Forum IMA v1.1, (R-130) and (O-26) in Section 12.2… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.15 | Columnxldv20pmImaLinkCurrentNeRxUnusableSecs | read-only | mandatory | Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in the current 15 minute interval. ATM Forum IMA v1.1, (R-131) and (O-26) in Section 12.2… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.16 | Columnxldv20pmImaLinkCurrentFeTxUnusableSecs | read-only | mandatory | Tx Unusable seconds: count of Unusable seconds at the far-end Tx LSM in the current 15 minute interval. ATM Forum IMA v1.1, (R-132) and (O-26) in Section 12.2.… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.17 | Columnxldv20pmImaLinkCurrentFeRxUnusableSecs | read-only | mandatory | Rx Unusable seconds: count of Unusable seconds at the far-end Rx LSM in the current 15 minute interval. ATM Forum IMA v1.1, (R-133) and (O-26) in Section 12.2.… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.18 | Columnxldv20pmImaLinkCurrentNeTxNumFailures | read-only | mandatory | The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in th… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.19 | Columnxldv20pmImaLinkCurrentNeRxNumFailures | read-only | mandatory | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implemen… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17 | Tablexldv20pmImaLinkHistoryTable | not-accessible | mandatory | This table contains the entries for the 15 min /one day-history data collection results for PMo objects of IMA Link interfaces. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1 | Rowxldv20pmImaLinkHistoryEntry | not-accessible | mandatory | An entry describing the History Data Table for PMo IMA groups. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.1 | Columnxldv20pmImaLinkHistoryIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.2 | Columnxldv20pmImaLinkHistoryHistEntryNr | read-only | mandatory | This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pm… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.3 | Columnxldv20pmImaLinkHistorySuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.4 | Columnxldv20pmImaLinkHistoryPeriodEndTime | read-only | mandatory | Date/time at the end of the selected interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.5 | Columnxldv20pmImaLinkHistoryImaViolations | read-only | mandatory | ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in one of the previous 96, individual 15 minute, i… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.6 | Columnxldv20pmImaLinkHistoryOifAnomalies | read-only | mandatory | The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in one of the previous 96, individual 15 minute, intervals or the pre… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.7 | Columnxldv20pmImaLinkHistoryNeSevErroredSecs | read-only | mandatory | Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.8 | Columnxldv20pmImaLinkHistoryFeSevErroredSecs | read-only | mandatory | Count of unavailable seconds at near-end in one of the previous 96, individual 15 minute, intervals or the previous day. Unavailability begins at the onset of … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.9 | Columnxldv20pmImaLinkHistoryNeUnavailSecs | read-only | mandatory | Count of unavailable seconds at near-end in one of the previous 96, individual 15 minute, intervals or the previous day. Unavailability begins at the onset of … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.10 | Columnxldv20pmImaLinkHistoryFeUnavailSecs | read-only | mandatory | Count of unavailable seconds at far-end in one of the previous 96, individual 15 minute, intervals or the previous day. Unavailability begins at the onset of 1… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.11 | Columnxldv20pmImaLinkHistoryNeTxUnusableSecs | read-only | mandatory | Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.12 | Columnxldv20pmImaLinkHistoryNeRxUnusableSecs | read-only | mandatory | Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.13 | Columnxldv20pmImaLinkHistoryFeTxUnusableSecs | read-only | mandatory | Tx Unusable seconds: count of Unusable seconds at the far-end Tx LSM in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.14 | Columnxldv20pmImaLinkHistoryFeRxUnusableSecs | read-only | mandatory | Rx Unusable seconds: count of Unusable seconds at the far-end Rx LSM in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.15 | Columnxldv20pmImaLinkHistoryNeTxNumFailures | read-only | mandatory | The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in on… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.16 | Columnxldv20pmImaLinkHistoryNeRxNumFailures | read-only | mandatory | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implemen… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3 | Nodexldv20pmProtocolMonitoring | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1 | Tablexldv20pmTcaPrMCurrentTable | not-accessible | mandatory | This table contains the entries for the PrM object at the following tca layer locations: - STM1 interface (in downstream direction) - STS3-c interface (in down… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1 | Rowxldv20pmTcaPrMCurrentEntry | not-accessible | mandatory | An entry describing the TC-Adaptor Current Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.1 | Columnxldv20pmTcIntervalType | read-only | mandatory | This nac type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.2 | Columnxldv20pmTcAdminState | read-write | mandatory | This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.3 | Columnxldv20pmTcSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.4 | Columnxldv20pmTcHistEntrySize | read-only | mandatory | This read-only attribute indicates the number of 15min history entries configured for the particular interface. The default value is 1 and means that at least … |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.5 | Columnxldv20pmTcNrHistEntriesAvailable | read-only | mandatory | This read-only attribute indicates how many HistEntries are already available. The range of values is between 0 and xldv20pmTcHistEntrySize, thereby 0 means th… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.6 | Columnxldv20pmTcElapsedTime | read-only | mandatory | This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute int… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.7 | Columnxldv20pmTcThresholdLimitIndex | read-write | mandatory | This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reporte… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.8 | Columnxldv20pmTcDiscardedCells | read-only | mandatory | This read-only attribute represents a counter of the number of ATM cells discarded at this interface, due to a HEC violation, since the start of this interval . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2 | Tablexldv20pmTcaPrMHistoryTable | not-accessible | mandatory | This table contains the entries for the PrM history object at the different tca layer locations. It contains results that are overtaken from the TcaPrMCurrentT… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1 | Rowxldv20pmTcaPrMHistoryEntry | not-accessible | mandatory | An entry describing the TC-Adaptor History Data Table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.1 | Columnxldv20pmThIntervalType | read-only | mandatory | This type attribute is used to select between the 15 min or the day accumulation types. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.2 | Columnxldv20pmThHistEntryNr | read-only | mandatory | This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pm… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.3 | Columnxldv20pmThSuspectFlag | read-only | mandatory | This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.4 | Columnxldv20pmThPeriodEndTime | read-only | mandatory | This read-only attribute is a record of date/time at the end of an interval . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.5 | Columnxldv20pmThDiscardedCells | read-only | mandatory | This read-only attribute represents a set of history counter of the number of ATM cells discarded at this interface, due to a HEC violation, since the start of… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4 | Nodexldv20pmThresholding | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1 | Tablexldv20pmThresholdLimitTable | not-accessible | mandatory | The threshold limit table for all interface. This table associates threshold limit index/PM counter pairs with threshold limit values for a 15 minutes interval… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1 | Rowxldv20pmThresholdLimitEntry | not-accessible | mandatory | An entry describing the threshold limit information . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.1 | Columnxldv20pmThlThresholdLimitIndex | read-only | mandatory | This read-only attribute selects a profile out of the threshold limit table . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.2 | Columnxldv20pmThlNeBackgroundBlockErrors | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.3 | Columnxldv20pmThlNeCodeViolations | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.4 | Columnxldv20pmThlNeCodeViolationsCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.5 | Columnxldv20pmThlNeCodeViolationsP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.6 | Columnxldv20pmThlNeCodeViolationsPLCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.7 | Columnxldv20pmThlNeErroredSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.8 | Columnxldv20pmThlNeErroredSecondsCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.9 | Columnxldv20pmThlNeErroredSecondsPLCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.10 | Columnxldv20pmThlNeSas | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.11 | Columnxldv20pmThlNeSeverelyErroredFrameSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.12 | Columnxldv20pmThlNeSeverelyErroredSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.13 | Columnxldv20pmThlNeSeverelyErroredSecondsCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.14 | Columnxldv20pmThlNeSeverelyErroredSecondsPLCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.15 | Columnxldv20pmThlNeUnavailableSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.16 | Columnxldv20pmThlNeUnavailableSecondsPLCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.17 | Columnxldv20pmThlNeAisSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.18 | Columnxldv20pmThlNeOfsSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.19 | Columnxldv20pmThlNeLosSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.20 | Columnxldv20pmThlFeBackgroundBlockErrors | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.21 | Columnxldv20pmThlFeCodeViolations | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.22 | Columnxldv20pmThlFeCodeViolationsCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.23 | Columnxldv20pmThlFeCodeViolationsPLCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.24 | Columnxldv20pmThlFeErroredSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.25 | Columnxldv20pmThlFeErroredSecondsCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.26 | Columnxldv20pmThlFeErroredSecondsPLCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.27 | Columnxldv20pmThlFeSas | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.28 | Columnxldv20pmThlFeSeverelyErroredSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.29 | Columnxldv20pmThlFeSeverelyErroredSecondsCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.30 | Columnxldv20pmThlFeSeverelyErroredSecondsPLCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.31 | Columnxldv20pmThlFeUnavailableSeconds | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.32 | Columnxldv20pmThlFeUnavailableSecondsPLCP | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.33 | Columnxldv20pmThlDiscardedCells | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.34 | Columnxldv20pmThlImaGroupUnavailSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.35 | Columnxldv20pmThlImaGroupNeNumFailures | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.36 | Columnxldv20pmThlImaLinkImaViolations | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.37 | Columnxldv20pmThlImaLinkOifAnomalies | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.38 | Columnxldv20pmThlImaLinkNeSevErroredSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.39 | Columnxldv20pmThlImaLinkFeSevErroredSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.40 | Columnxldv20pmThlImaLinkNeUnavailSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.41 | Columnxldv20pmThlImaLinkFeUnavailSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.42 | Columnxldv20pmThlImaLinkNeTxUnusableSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.43 | Columnxldv20pmThlImaLinkNeRxUnusableSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.44 | Columnxldv20pmThlImaLinkFeTxUnusableSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.45 | Columnxldv20pmThlImaLinkFeRxUnusableSecs | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.46 | Columnxldv20pmThlImaLinkNeTxNumFailures | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.47 | Columnxldv20pmThlImaLinkNeRxNumFailures | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2 | Tablexldv20pmAtmThresholdLimitTable | not-accessible | mandatory | The threshold limit table for all interface. This table associates threshold limit index/PM counter pairs with threshold limit values for a 15 minutes interval… |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1 | Rowxldv20pmAtmThresholdLimitEntry | not-accessible | mandatory | An entry describing the threshold limit information . |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1.1 | Columnxldv20pmAtlThresholdLimitIndex | read-only | mandatory | This read-only attribute selects a profile out of the threshold limit table of PM on ATM layer. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1.2 | Columnxldv20pmAtlTransmittedUserCells | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1.3 | Columnxldv20pmAtlLostUserCells | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1.4 | Columnxldv20pmAtlMisinsertedUserCells | read-write | mandatory | This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5 | Nodexldv20pmTraps | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1 | Nodexldv20pmTrapVars | |||
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.1 | Scalarxldv20pmTvIfIndex | not-accessible | mandatory | The interface index of the reporting PM object. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.2 | Scalarxldv20pmTvPmType | not-accessible | mandatory | Specifies the reporting PM object and OAM level. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.3 | Scalarxldv20pmTvPmCounter | not-accessible | mandatory | Identifies the PM counter. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.4 | Scalarxldv20pmTvCurrentCounterValue | not-accessible | mandatory | The actual counter value at detection. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.5 | Scalarxldv20pmTvCurrentCounterLimit | not-accessible | mandatory | The current value of threshold limit. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.6 | Scalarxldv20pmTvAtmPmCounter | not-accessible | mandatory | Identifies the performance parameter. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.7 | Scalarxldv20pmTvAtmObjectIndex | not-accessible | mandatory | Identifies the AtmPm object. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.8 | Scalarxldv20pmTvEndpointType | not-accessible | mandatory | Identifies the type of endpoint. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.9 | Scalarxldv20pmTvIntervalType | not-accessible | mandatory | Identifies the type of interval. |
| 1.3.6.1.4.1.231.7.1.2.1.1.5.5.2 | Nodexldv20pmTrapTypes |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Xldv20pmAtmCounterType | INTEGER { transmittedUserCells(1), lostUserCells(2), misinsertedUserCells(3) } | ||
| Xldv20pmBlockSizeType | INTEGER { undefined(0), blockSize128(128), blockSize256(256), blockSize512(512), blockSize1024(1024) } | ||
| Xldv20pmConnectionIndexType | INTEGER { undefined(0), vplUni(1), vplNni(2), vclUni(3), vclNni(4) } | ||
| Xldv20pmControlReq | INTEGER { noRequest (1), resetIndividCurrent (2), setNrHistEntriesSize (3), paramFaulty (4), nrHistEntriesSizeNotAcceptable (5), dataDaseMemoryNotAvailable (6), create (7), delete (8), addEndpoint (9), removeEndpoint (10), indexLimitExceeded (11), atmPmObjectActive (12), atmPmObjectNotExists (13), endpointExistsAlready (14), | ||
| Xldv20pmCounterName | INTEGER { noPmCounter(0), neBackgroundBlockErrors(1), neCodeViolations(2), neCodeViolationsCP(3), neCodeViolationsP(4), neCodeViolationsPLCP(5), neErroredSeconds(6), neErroredSecondsCP(7), neErroredSecondsPLCP(8), neSas(9), neSeverelyErroredFrameSeconds(10), neSeverelyErroredSeconds(11), neSeverelyErroredSecondsCP(12), neSeverelyErroredSecondsPLCP(13), neUnavailableSeconds(14), neUnavailableSecondsPLCP(15), neAisSeconds(16), neOfsSeconds(17), neLosSeconds(18), feBackgroundBlockErrors(19), feCodeViolations(20), feCodeViolationsCP(21), feCodeViolationsPLCP(22), feErroredSeconds(23), feErroredSecondsCP(24), feErroredSecondsPLCP(25), feSas(26), feSeverelyErroredSeconds(27), feSeverelyErroredSecondsCP(28), feSeverelyErroredSecondsPLCP(29), feUnavailableSeconds(30), feUnavailableSecondsPLCP(31), discardedCells(32), imaGroupUnavailSecs(33), imaGroupNeNumFailures(34), imaLinkImaViolations(35), imaLinkOifAnomalies(36), imaLinkNeSevErroredSecs(37), imaLinkFeSevErroredSecs(38), imaLinkNeUnavailSecs(39), imaLinkFeUnavailSecs(40), imaLinkNeTxUnusableSecs(41), imaLinkNeRxUnusableSecs(42), imaLinkFeTxUnusableSecs(43), imaLinkFeRxUnusableSecs(44), imaLinkNeTxNumFailures(45), imaLinkNeRxNumFailures(46), maxPmCounter(47) } | ||
| Xldv20pmEndpointType | INTEGER { source(1), sink(2) } | ||
| Xldv20pmFlowType | INTEGER { undefined(0), f4Segment(1), f4EndToEnd(2), f5Segment(3), f5EndToEnd(4) } | ||
| Xldv20pmIntervalType | INTEGER { min15(1), day(2) } | ||
| Xldv20pmRoleType | INTEGER { undefined(0), analyseWithBackwardReporting(1), analyseWithoutBackwardReporting(2), generateWithCollect(3), generateWithoutCollect(4)} | ||
| Xldv20pmSuspectType | INTEGER { undefined(0), reliable(1), suspect(2) } | ||
| Xldv20pmType | INTEGER { pmTypeUnknown(0), s1F1PMo(1), s1F2PMo(2), s1F3PMo(3), s3F1PMo(4), s3F2PMo(5), s3F3PMo(6), d3F2PMo(7), d3F3PMo(8), e3F3PMo(9), adcF3PMo(10), s1PrM(11), s3PrM(12), e3PrM(13), d3PrM(14), adcPrM(15), e1ImaPrM(16), d1ImaPrM(17), e1ImaPMo(18), d1ImaPMo(19), atmImaPMo(20), maxPmType(21) } |