XYLAN-ASCONFIG-MIB
28 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.21.1 | NodeascfgControl | |||
| 1.3.6.1.4.1.800.2.21.1.1 | ScalarascfgInputFileName | read-write | mandatory | The name of the configuration file to be read by the device. The file specified should be present on the device. |
| 1.3.6.1.4.1.800.2.21.1.2 | ScalarascfgAction | read-write | mandatory | Determines whether or not configuration values in ascfgInputFile will be applied to current device configuration. A value of checkSyntax causes ascfgInputFile … |
| 1.3.6.1.4.1.800.2.21.1.3 | ScalarascfgErrorFileName | read-only | mandatory | The name of the file which contains the error messages is automatically generated by the device. |
| 1.3.6.1.4.1.800.2.21.1.4 | ScalarascfgStatus | read-only | mandatory | Status of current (if in progress) or most recent application of ASCII configuration data to the device. |
| 1.3.6.1.4.1.800.2.21.1.5 | ScalarascfgErrors | read-only | mandatory | Number of errors found in most recent application of ASCII configuration file to the device. This object is meaningful only in cases where ascfgStatus has a va… |
| 1.3.6.1.4.1.800.2.21.1.6 | ScalarascfgTimerFileName | read-write | mandatory | The name of the configuration file to be read later by the device. The file specified should be present on the device. |
| 1.3.6.1.4.1.800.2.21.1.7 | ScalarascfgTimerFileTime | read-write | mandatory | The (local)time when the configuration file will read by the device. The following formats are valid: YY/MM/DD hh:mm MM/DD hh:mm - uses current year if after c… |
| 1.3.6.1.4.1.800.2.21.1.8 | ScalarascfgTimerFileStatus | read-only | mandatory | The current status of the ASCII configuration timer. |
| 1.3.6.1.4.1.800.2.21.1.9 | ScalarascfgTimerClear | read-write | mandatory | A set of this object causes the ASCII configuration timer to be cleared. |
| 1.3.6.1.4.1.800.2.21.1.10 | ScalarascfgSnapshotFileName | read-write | mandatory | The name of the configuration snapshot file to be produced by the device. The file specified should not be present on the device. |
| 1.3.6.1.4.1.800.2.21.1.11 | ScalarascfgSnapshotInitiate | read-write | mandatory | A set of this object causes a configuration snapshot to be generated by the device, provided that object ascfgSnapshotFileName has been set. |
| 1.3.6.1.4.1.800.2.21.1.12 | ScalarascfgSnapshotIpSelect | read-write | mandatory | The value of this object determines whether or not IP configuration data is included in the snapshot to be generated by the device. Default is excludeFromSnaps… |
| 1.3.6.1.4.1.800.2.21.1.13 | ScalarascfgSnapshotIpxSelect | read-write | mandatory | The value of this object determines whether or not IPX configuration data is included in the snapshot to be generated by the device. Default is excludeFromSnap… |
| 1.3.6.1.4.1.800.2.21.1.14 | ScalarascfgSnapshotSystemSelect | read-write | mandatory | The value of this object determines whether or not system configuration data is included in the snapshot to be generated by the device. Default is excludeFromS… |
| 1.3.6.1.4.1.800.2.21.1.15 | ScalarascfgSnapshotSnmpSelect | read-write | mandatory | The value of this object determines whether or not SNMP configuration data is included in the snapshot to be generated by the device. Default is excludeFromSna… |
| 1.3.6.1.4.1.800.2.21.1.16 | ScalarascfgSnapshotAtmSelect | read-write | mandatory | The value of this object determines whether or not ATM configuration data is included in the snapshot to be generated by the device. Default is excludeFromSnap… |
| 1.3.6.1.4.1.800.2.21.1.18 | ScalarascfgSnapshotVlanSelect | read-write | mandatory | The value of this object determines whether or not group/VLAN configuration data is included in the snapshot to be generated by the device. Default is excludeF… |
| 1.3.6.1.4.1.800.2.21.1.19 | ScalarascfgSnapshotInterfaceSelect | read-write | mandatory | The value of this object determines whether or not interface configuration data is included in the snapshot to be generated by the device. Default is excludeFr… |
| 1.3.6.1.4.1.800.2.21.1.20 | ScalarascfgSnapshotBrdgSelect | read-write | mandatory | The value of this object determines whether or not bridging configuration data is included in the snapshot to be generated by the device. Default is excludeFro… |
| 1.3.6.1.4.1.800.2.21.1.21 | ScalarascfgSnapshotAllSelect | read-write | mandatory | The value of this object determines whether or not all configuration data is included in the snapshot to be generated by the device. Setting this object is equ… |
| 1.3.6.1.4.1.800.2.21.1.22 | ScalarascfgSnapshotSelectSummary | read-only | mandatory | This object is a bit mask which represents the current state of the snapshot select objects. Each selection object is represented by a single bit. The mapping … |
| 1.3.6.1.4.1.800.2.21.1.23 | ScalarascfgCommandStr | read-write | mandatory | This object is to be interpreted as a text-based configuration command and executed. |
| 1.3.6.1.4.1.800.2.21.1.24 | ScalarascfgCommandStatus | read-only | mandatory | This object contains the completion status of ascfgCommandStr as a text-based configuration command. |
| 1.3.6.1.4.1.800.2.21.1.25 | ScalarascfgSaveConfiguration | read-write | mandatory | This object triggers the process of saving the configuration info to the cache. It is applicable when the device is in the cache-only mode. |
| 1.3.6.1.4.1.800.2.21.1.26 | ScalarascfgConfigurationFileName | read-write | mandatory | The name of the ASCII configuration file to be used by the device to boot. * If a NULL string is passed, that signifies the switch will be booted up using the … |
| 1.3.6.1.4.1.800.2.21.1.27 | ScalarascfgCacheOnly | read-write | mandatory | This object is the flag for the device to toggle its configuration mode. When it is set to TRUE, all the subsequent configuration info is stored in the cache o… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AscSnapshotAction | INTEGER { excludeFromSnapshot(1), includeInSnapshot(2) } |