XYLAN-CSM-MIB
394 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.9.1 | NodexylanCsmMIB | |||
| 1.3.6.1.4.1.800.2.9.1.1 | NodeatmxVplGroup | |||
| 1.3.6.1.4.1.800.2.9.1.1.1 | TableatmxVplTable | not-accessible | mandatory | The Virtual Path Link (VPL) table. A bi-directional VPL is modeled as one entry in this table. |
| 1.3.6.1.4.1.800.2.9.1.1.1.1 | RowatmxVplEntry | not-accessible | mandatory | An entry in the VPL table. This entry is used to model a bi-directional VPL. To create a VPL at an ATM interface, either of the following procedures are used: … |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.1 | ColumnatmxVplSlotIndex | read-only | mandatory | The slot number of the chassis |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.2 | ColumnatmxVplPortIndex | read-only | mandatory | The port number of the csm board |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.3 | ColumnatmxVplVpi | read-only | mandatory | The VPI value of the VPL. Note that the VPI=0 is not used for a VPL not associated with a VCL. The maximum VPI value cannot exceed the value allowable by the a… |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.4 | ColumnatmxVplAdminStatus | read-write | mandatory | This object is implemented only for a VPL which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). Its value specifies the desired admini… |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.5 | ColumnatmxVplOperStatus | read-only | mandatory | This object indicates the current operational status of the VPL. The up and down states indicate that the VPL is currently operational, or not operational, res… |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.6 | ColumnatmxVplLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VPL entered its current operational state. If the current state was entered prior to the last re-initia… |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.7 | ColumnatmxVplReceiveTrafficDescrIndex | read-write | mandatory | The value of this object identifies the row in the atmxTrafficDescrParamTable which applies to the receive direction of the VPL. |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.8 | ColumnatmxVplTransmitTrafficDescrIndex | read-write | mandatory | The value of this object identifies the row in the atmxTrafficDescrParamTable which applies to the transmit direction of the VPL. |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.9 | ColumnatmxVplCrossConnectIdentifier | read-only | mandatory | This object is implemented only for a VPL which is cross-connected to other VPLs that belong to the same VPC. All such associated VPLs have the same value of t… |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.10 | ColumnatmxVplRowStatus | read-write | mandatory | This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. Thi… |
| 1.3.6.1.4.1.800.2.9.1.1.1.1.11 | ColumnatmxVplBidirect | read-write | mandatory | Indicates whether the same traffic parameters are used for both the transmit and receive sides of a virtual connection. |
| 1.3.6.1.4.1.800.2.9.1.2 | NodeatmxInterfaceConfGroup | |||
| 1.3.6.1.4.1.800.2.9.1.2.1 | TableatmxInterfaceConfTable | not-accessible | mandatory | This table contains ATM local interface configuration parameters, one entry per ATM interface port. |
| 1.3.6.1.4.1.800.2.9.1.2.1.1 | RowatmxInterfaceConfEntry | not-accessible | mandatory | This list contains ATM interface configuration parameters and state variables. |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.1 | ColumnatmxInterfaceSlotIndex | read-only | mandatory | The slot number of the chassis |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.2 | ColumnatmxInterfacePortIndex | read-only | mandatory | The slot number for the CSM board |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.3 | ColumnatmxInterfaceMaxVpcs | read-only | mandatory | The maximum number of VPCs (PVCs and SVCs) supported at this ATM interface. At the ATM UNI, the maximum number of VPCs (PVCs and SVCs) ranges from 0 to 256 onl… |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.4 | ColumnatmxInterfaceMaxVccs | read-only | mandatory | The maximum number of VCCs (PVCs and SVCs) supported at this ATM interface. |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.5 | ColumnatmxInterfaceConfVpcs | read-only | mandatory | The number of VPCs (PVCs and SVCs) configured for use at this ATM interface. At the ATM UNI, the configured number of VPCs (PVCs and SVCs) can range from 0 to … |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.6 | ColumnatmxInterfaceConfVccs | read-only | mandatory | The number of VCCs (PVCs and SVCs) configured for use at the ATM interface. |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.7 | ColumnatmxInterfaceMaxActiveVpiBits | read-write | mandatory | The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges … |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.8 | ColumnatmxInterfaceMaxActiveVciBits | read-write | mandatory | The maximum number of active VCI bits configured for use at this ATM interface. |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.9 | ColumnatmxInterfaceIlmiVpi | read-only | mandatory | The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then th… |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.10 | ColumnatmxInterfaceIlmiVci | read-only | mandatory | The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then th… |
| 1.3.6.1.4.1.800.2.9.1.2.1.1.11 | ColumnatmxInterfaceAddressType | read-only | mandatory | The type of primary ATM address configured for use at this ATM interface. |
| 1.3.6.1.4.1.800.2.9.1.3 | NodeatmxVclGroup | |||
| 1.3.6.1.4.1.800.2.9.1.3.1 | TableatmxVclTable | not-accessible | mandatory | The Virtual Channel Link (VCL) table. A bi-directional VCL is modeled as one entry in this table. |
| 1.3.6.1.4.1.800.2.9.1.3.1.1 | RowatmxVclEntry | not-accessible | mandatory | An entry in the VCL table. This entry is used to model a bi-directional VCL. To create a VCL at an ATM interface, either of the following procedures are used: … |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.1 | ColumnatmxVclSlotIndex | read-only | mandatory | The slot number |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.2 | ColumnatmxVclPortIndex | read-only | mandatory | The port number of the csm board |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.3 | ColumnatmxVclVpi | read-only | mandatory | The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits. |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.4 | ColumnatmxVclVci | read-only | mandatory | The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits. |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.5 | ColumnatmxVclAdminStatus | read-write | mandatory | This object is implemented only for a VCL which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). Its value specifies the desired admini… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.6 | ColumnatmxVclOperStatus | read-only | mandatory | This object indicates the current operational status of the VCL. The up and down states indicate that the VCL is currently operational, or not operational, res… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.7 | ColumnatmxVclLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VCL entered its current operational state. If the current state was entered prior to the last re-initia… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.8 | ColumnatmxVclReceiveTrafficDescrIndex | read-write | mandatory | The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL. |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.9 | ColumnatmxVclTransmitTrafficDescrIndex | read-write | mandatory | The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL. |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.10 | ColumnatmxVccAalType | read-write | mandatory | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL is in use. The type of AAL used on this VCC. The AAL typ… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.11 | ColumnatmxVccAal5CpcsTransmitSduSize | read-write | mandatory | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets tha… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.12 | ColumnatmxVccAal5CpcsReceiveSduSize | read-write | mandatory | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets tha… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.13 | ColumnatmxVccAal5EncapsType | read-write | mandatory | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of data encapsulation used over the… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.14 | ColumnatmxVclCrossConnectIdentifier | read-only | mandatory | This object is implemented only for a VCL which is cross-connected to other VCLs that belong to the same VCC. All such associated VCLs have the same value of t… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.15 | ColumnatmxVclRowStatus | read-write | mandatory | This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. Thi… |
| 1.3.6.1.4.1.800.2.9.1.3.1.1.16 | ColumnatmxVclBidirect | read-write | mandatory | Indicates whether the same traffic parameters are used for both the transmit and receive sides of a virtual connection. |
| 1.3.6.1.4.1.800.2.9.1.4 | NodexylnatmInterfaceConfGroup | |||
| 1.3.6.1.4.1.800.2.9.1.4.1 | TablexylnatmInterfaceConfTable | not-accessible | mandatory | This table contains the private ATM local interface configuration parameters, one entry per ATM interface port. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1 | RowxylnatmInterfaceConfEntry | not-accessible | mandatory | This list contains xyln specific ATM interface configuration parameters and state variables. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.1 | ColumnxylnatmInterfaceSlotIndex | read-only | mandatory | The slot number of the chassis |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.2 | ColumnxylnatmInterfacePortIndex | read-only | mandatory | The port number of the chassis |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.3 | ColumnxylnatmInterfaceDescription | read-write | mandatory | The name in ascii characters describing the interface |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.4 | ColumnxylnatmInterfaceTransType | read-only | mandatory | The transmission type at this interface. The type is either an unknown type or sonet/ds3/ds12/4b-5b/8b_10b encoding method. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.5 | ColumnxylnatmInterfaceType | read-write | mandatory | The signaling type at this interface. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.6 | ColumnxylnatmInterfaceMediaType | read-only | mandatory | The physical media type from this physical port |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.7 | ColumnxylnatmInterfaceAtmAddress | read-write | mandatory | The AtmAddress @ this interface. The AtmAddress should be a 20 octet hex number. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.8 | ColumnxylnatmInterfacePortMode | read-only | mandatory | This object describes whether this interface is switched off or allowing traffic to pass thru or is in normal mode. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.9 | ColumnxylnatmInterfaceOperStatus | read-only | mandatory | The Oper status @ this interface is reflected by the status of the object. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.10 | ColumnxylnatmInterfaceQsaalStatus | read-only | mandatory | The QSAAL status @ this interface is reflected by the status of the object. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.11 | ColumnxylnatmInterfaceIlmiStatus | read-only | mandatory | The Ilmi Status @ this interface. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.12 | ColumnxylnatmInterfaceTpRedirect | read-only | mandatory | This object indicates whether Cut-Over is enabled or disabled @ this interface |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.13 | ColumnxylnatmInterfaceCutOverSlot | read-write | mandatory | The Cut-Over slot number of the chassis |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.14 | ColumnxylnatmInterfaceCutOverPort | read-write | mandatory | The Cut Over Port number of the chassis |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.15 | ColumnxylnatmInterfaceClearPortStats | read-write | mandatory | True clears the stats for this port |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.16 | ColumnxylnatmInterfaceClearChanStats | read-write | mandatory | True clears the chan stats |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.17 | ColumnxylnatmInterfaceClearSlotStats | read-write | mandatory | True clears all the port stats in this slot. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.18 | ColumnxylnatmInterfaceTransmissionType | read-write | mandatory | The type of physical media for transmission on the port Sonet or SDH. SDH is primarily used in Europe and Sonet in the US. The S bit in the payload pointer is … |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.19 | ColumnxylnatmInterfaceIlmiState | read-write | mandatory | The state of Ilmi for the instanced port. Setting this object to disable, would prevent any ILMI queries being sent out on this port. |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.20 | ColumnxylnatmInterfaceTimingMode | read-write | mandatory | This object selects the method used by the port to generate the clock used for transmit data. local(1) selects local clock source. loop(2) selects the derived … |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.21 | ColumnxylnatmInterfaceLocalSrc | read-write | mandatory | This object selects which local clock source used to drive the transmit data for the port. This option is not available when the port's timing mode is loop. os… |
| 1.3.6.1.4.1.800.2.9.1.4.1.1.22 | ColumnxylnatmInterfaceUniVersion | read-write | mandatory | UNI Version used in the chassis |
| 1.3.6.1.4.1.800.2.9.1.4.3 | TablexylnatmILMIConfTable | not-accessible | mandatory | This table contains CSM ILMI configuration parameters, one entry per CSM physical interface, or per virtual UNI/NNI instance |
| 1.3.6.1.4.1.800.2.9.1.4.3.1 | RowxylnatmILMIConfEntry | not-accessible | mandatory | This list contains CSM ILMI configuration and state variables |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.1 | ColumnxylnatmILMIConfSlot | read-only | mandatory | The slot number this entry represents |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.2 | ColumnxylnatmILMIConfPort | read-only | mandatory | The port number this entry represents |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.3 | ColumnxylnatmILMIConfInstance | read-only | mandatory | The Virtual UNI/NNI instance this entry represents |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.4 | ColumnxylnatmILMIConfILMIEnable | read-write | mandatory | Indicate whether ILMI is enabled on this port, or on this Virtual UNI/NNI instance |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.5 | ColumnxylnatmILMIConfILMIPollEnable | read-write | mandatory | Indicate whether ILMI polling is enabled on this port, or on this Virtual UNI/NNI instance |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.6 | ColumnxylnatmILMIConfAutoCfgEnable | read-write | mandatory | Indicate whether CSM auto cfg is enabled on this port, or on this Virtual UNI/NNI instance |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.7 | ColumnxylnatmILMIConfAutoCfgStatus | read-only | mandatory | The status of auto configuration procedure on this port, or this Virtual UNI/NNI instance |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.8 | ColumnxylnatmILMIConfAutoCfgTrigg | read-write | mandatory | Indicate how auto configuration procedure is triggerred on this port or virtual UNI/NNI instance, phy indicates auto configuration is only triggered when the p… |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.9 | ColumnxylnatmILMIConfAutoCfgDfltIf | read-write | mandatory | The default interface type this port or virtual UNI/NNI instance will take when auto configuration procedure fails to detect its peer port's interface type |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.10 | ColumnxylnatmILMIConfAutoCfgDfltSigVer | read-write | mandatory | The default signaling version this port or virtual UNI/NNI instance will take when auto configuration procedure fails to detect its peer port's signaling versi… |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.11 | ColumnxylnatmILMIConfAutoCfgCurIf | read-write | mandatory | Current operational interface type for this CSM port or virtual UNI/NNI instance |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.12 | ColumnxylnatmILMIConfAutoCfgCurSigVer | read-only | mandatory | Current operational signaling version for this CSM port or virtual UNI/NNI instance |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.13 | ColumnxylnatmILMIConfAutoCfgCurILMIVer | read-only | mandatory | Current ILMI version running on this CSM port or virtual UNI/NNI instance |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.14 | ColumnxylnatmILMIConfPeerUniType | read-only | mandatory | The UNI type this port gathered from its peer port through ILMI |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.15 | ColumnxylnatmILMIConfPeerUniVer | read-only | mandatory | The signaling version this port gathered from its peer port through ILMI |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.16 | ColumnxylnatmILMIConfPeerDevType | read-only | mandatory | The device type this port gathered from its peer port through ILMI |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.17 | ColumnxylnatmILMIConfPeerNNISigVer | read-only | mandatory | The NNI signaling version this port gathered from its peer port through ILMI |
| 1.3.6.1.4.1.800.2.9.1.4.3.1.18 | ColumnxylnatmILMIConfPeerILMIVer | read-only | mandatory | The ILMI version this port gathered from its peer port through ILMI |
| 1.3.6.1.4.1.800.2.9.1.5 | NodeatmxVpCrossConnectGroup | |||
| 1.3.6.1.4.1.800.2.9.1.5.1 | TableatmxVpCrossConnectTable | not-accessible | mandatory | The ATM VP Cross Connect table. A bi- directional VP cross-connect which cross-connects two VPLs is modeled as one entry in this table. |
| 1.3.6.1.4.1.800.2.9.1.5.1.1 | RowatmxVpCrossConnectEntry | not-accessible | mandatory | An entry in the ATM VP Cross Connect table. This entry is used to model a bi-directional ATM VP cross-connect which cross-connects two VPLs. Step-wise Procedur… |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.1 | ColumnatmxVpCrossConnectIndex | read-only | mandatory | A unique value to identify this VP Cross Connect |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.2 | ColumnatmxVpCrossConnectLowSlotIndex | read-only | mandatory | The low slot number |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.3 | ColumnatmxVpCrossConnectLowPortIndex | read-only | mandatory | The low physical port number |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.4 | ColumnatmxVpCrossConnectLowVpi | read-only | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the VP cross-connect that is identified by atmxVpCrossConnectLow (Slot/… |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.5 | ColumnatmxVpCrossConnectHighSlotIndex | read-only | mandatory | The value of the high slot number |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.6 | ColumnatmxVpCrossConnectHighPortIndex | read-only | mandatory | The high physical port number |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.7 | ColumnatmxVpCrossConnectHighVpi | read-only | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the VP cross-connect that is identified by atmxVpCrossConnectHigh(Slot/… |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.8 | ColumnatmxVpCrossConnectAdminStatus | read-write | mandatory | The value of this object identifies the desired administrative status of this bi-directional VP cross-connect. The up and down states indicate that the traffic… |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.9 | ColumnatmxVpCrossConnectL2HOperStatus | read-only | mandatory | The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the low to high direction). The up and… |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.10 | ColumnatmxVpCrossConnectH2LOperStatus | read-only | mandatory | The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the high to low direction). The up and… |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.11 | ColumnatmxVpCrossConnectL2HLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VP cross-connect entered its current operational state in the low to high direction. If the current sta… |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.12 | ColumnatmxVpCrossConnectH2LLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VP cross-connect entered its current operational state in the high to low direction. If the current sta… |
| 1.3.6.1.4.1.800.2.9.1.5.1.1.13 | ColumnatmxVpCrossConnectRowStatus | read-write | mandatory | The status of this entry in the atmxVpCrossConnectTable. This object is used to create a cross-connect for cross-connecting VPLs which are created using the at… |
| 1.3.6.1.4.1.800.2.9.1.5.2 | TableatmxSvcVpCrossConnectTable | not-accessible | mandatory | The ATM SVC VP Cross Connect table. A bi- directional VP cross-connect which cross-connects two SVC VPLs is modeled as one entry in this table. |
| 1.3.6.1.4.1.800.2.9.1.5.2.1 | RowatmxSvcVpCrossConnectEntry | not-accessible | mandatory | An entry in the ATM SVC VP Cross Connect table. This entry is used to model a bi-directional ATM SVC VP cross-connect which cross-connects two VPLs. |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.1 | ColumnatmxSvcVpCrossConnectLowSlotIndex | not-accessible | mandatory | The low slot of the SVC VP cross-connect. |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.2 | ColumnatmxSvcVpCrossConnectLowPortIndex | not-accessible | mandatory | The incoming slot for this SVC |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.3 | ColumnatmxSvcVpCrossConnectLowVpi | not-accessible | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the SVC VP cross-connect that is identified by atmSvcVpCrossConnectLow(… |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.4 | ColumnatmxSvcVpCrossConnectHighSlotIndex | not-accessible | mandatory | The outgoing slot for this SVC |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.5 | ColumnatmxSvcVpCrossConnectHighPortIndex | not-accessible | mandatory | The outgoing port for this SVC |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.6 | ColumnatmxSvcVpCrossConnectHighVpi | not-accessible | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the SVC VP cross-connect that is identified by atmSvcVpCrossConnectHigh… |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.7 | ColumnatmxSvcVpCrossConnectCreationTime | read-only | mandatory | The value of MIB II's sysUpTime object at the time this bi-directional SVC VP cross-connect was created. If the current state was entered prior to the last re-… |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.8 | ColumnatmxSvcVpCrossConnectLowTDIndex | read-only | mandatory | The low end connections Traffic Descriptor Index |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.9 | ColumnatmxSvcVpCrossConnectHighTDIndex | read-only | mandatory | The high connections traffic descriptor index |
| 1.3.6.1.4.1.800.2.9.1.5.2.1.10 | ColumnatmxSvcVpCrossConnectRowStatus | read-only | mandatory | This object can be used to delete rows in the atmSvcVpCrossConnectTable. But unless we require it for specific reasons we will not allow creation/deletion |
| 1.3.6.1.4.1.800.2.9.1.6 | NodexylnatmInterfaceStatGroup | |||
| 1.3.6.1.4.1.800.2.9.1.6.1 | TablexylnatmInterfaceStatTable | not-accessible | mandatory | This table contains the statistical information about the interface |
| 1.3.6.1.4.1.800.2.9.1.6.1.1 | RowxylnatmInterfaceStatEntry | not-accessible | mandatory | This list contains xylan specific ATM interface configuration parameters and state variables |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.1 | ColumnxylnatmInterfaceStatSlotIndex | read-only | mandatory | The slot number in the switch |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.2 | ColumnxylnatmInterfaceStatPortIndex | read-only | mandatory | The port number in this slot |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.3 | ColumnxylnatmInterfaceStatRxCells | read-only | mandatory | The total number of Received Cells at this interface (OC3, OC12, ATM25...) |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.4 | ColumnxylnatmInterfaceStatRxClp0Cells | read-only | mandatory | The total number of received cells at this interface with Cell loss priority of zero |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.5 | ColumnxylnatmInterfaceStatRxClp1Cells | read-only | mandatory | The total number of received cells at this interface with Cell loss Priority of zero or one |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.6 | ColumnxylnatmInterfaceStatTxCells | read-only | mandatory | The total number of transmitted cells at this interface |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.7 | ColumnxylnatmInterfaceStatMarkEfciCells | read-only | mandatory | The number of cells that are marked with efci (explicit forward congestion notification) in the payload type identifier field of the atm cell. This EFCI notifi… |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.8 | ColumnxylnatmInterfaceStatMarkGcraCells | read-only | mandatory | The number of cells marked by policing that violated their traffic contract for clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.9 | ColumnxylnatmInterfaceStatTotalDiscardCells | read-only | mandatory | The total number of cells discarded at this interface due to congestion, policing and unknown vpi/vci's |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.10 | ColumnxylnatmInterfaceStatDxCongClp0Cells | read-only | mandatory | The number of Clp0 cells discarded due to congestion |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.11 | ColumnxylnatmInterfaceStatDxCongClp1Cells | read-only | mandatory | The number of Clp1 cells discarded due to congestion |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.12 | ColumnxylnatmInterfaceStatDxGcraClp0Cells | read-only | mandatory | The total number of Clp0 cells discarded due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.13 | ColumnxylnatmInterfaceStatDxGcraClp1Cells | read-only | mandatory | The total number of cell loss priority one cells discarded due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.14 | ColumnxylnatmInterfaceStatDxGcrabClp0Cells | read-only | mandatory | The total number of Clp0 cells discarded due to policing on cell loss priority zero cells |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.15 | ColumnxylnatmInterfaceStatDxGcrabClp1Cells | read-only | mandatory | The total number of cell loss prioity one cells discarded due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.16 | ColumnxylnatmInterfaceStatUnknownVpVcCells | read-only | mandatory | The total number of cells received on this interface which has a vpi/vci combination that doesnt correspond to any channels vpi/vci for this physical interface |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.17 | ColumnxylnatmInterfaceStatUnknownVpiCells | read-only | mandatory | The total number of unknown Vpi cells recieved at this interface that dont correspond to any channels vpi |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.18 | ColumnxylnatmInterfaceStatUnknownVciCells | read-only | mandatory | The total number of unknown Vci cells recieved at this interface that dont correspond to any channels vci |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.19 | ColumnxylnatmInterfaceStatUniType | read-only | mandatory | Type of UNI used on this interface...Public or Private |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.20 | ColumnxylnatmInterfaceStatUniVersion | read-only | mandatory | UNI Version used in the chassis |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.21 | ColumnxylnatmInterfaceStatRemainingRxBandwidth | read-only | mandatory | The remaining bandwidth available on this port thru which connections can be created and cells can be received. |
| 1.3.6.1.4.1.800.2.9.1.6.1.1.22 | ColumnxylnatmInterfaceStatRemainingTxBandwidth | read-only | mandatory | The remaining bandwidth available on this port thru which connections can be created for cells to be transmitted |
| 1.3.6.1.4.1.800.2.9.1.7 | NodeatmxVcCrossConnectGroup | |||
| 1.3.6.1.4.1.800.2.9.1.7.1 | TableatmxVcCrossConnectTable | not-accessible | mandatory | The ATM VC Cross Connect table. A bi- directional VC cross-connect which cross-connects two end points (i.e., VCLs) is modeled as one entry in this table. |
| 1.3.6.1.4.1.800.2.9.1.7.1.1 | RowatmxVcCrossConnectEntry | not-accessible | mandatory | An entry in the ATM VC Cross Connect table. This entry is used to model a bi-directional ATM VC cross-connect cross-connecting two end points. Step-wise Proced… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.1 | ColumnatmxVcCrossConnectIndex | read-only | mandatory | A unique value to identify this VC Cross Connect |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.2 | ColumnatmxVcCrossConnectLowSlotIndex | read-only | mandatory | The low port number |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.3 | ColumnatmxVcCrossConnectLowPortIndex | read-only | mandatory | The value of this object is equal to the ATM interface port in this slot for this VC cross-connect. The term low implies that this ATM interface has the numeri… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.4 | ColumnatmxVcCrossConnectLowVpi | read-only | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the VC cross-connect that is identified by atmxVcCrossConnectLow(Slot/P… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.5 | ColumnatmxVcCrossConnectLowVci | read-only | mandatory | The value of this object is equal to the VCI value at the ATM interface associated with this VC cross-connect that is identified by atmxVcCrossConnectLow(Slot/… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.6 | ColumnatmxVcCrossConnectHighSlotIndex | read-only | mandatory | The high port number |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.7 | ColumnatmxVcCrossConnectHighPortIndex | read-only | mandatory | The value of this object is equal to the ATM interface port in this slot for this VC cross-connect. The term high implies that this VC cross-connect that this … |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.8 | ColumnatmxVcCrossConnectHighVpi | read-only | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the VC cross-connect that is identified by atmxVcCrossConnectHigh(slot/… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.9 | ColumnatmxVcCrossConnectHighVci | read-only | mandatory | The value of this object is equal to the VCI value at the ATM interface associated with the VC cross-connect that is identified by atmxVcCrossConnectHigh(Slot/… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.10 | ColumnatmxVcCrossConnectAdminStatus | read-write | mandatory | The value of this object identifies the desired administrative status of this bi-directional VC cross-connect. The up and down states indicate that the traffic… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.11 | ColumnatmxVcCrossConnectL2HOperStatus | read-only | mandatory | The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.12 | ColumnatmxVcCrossConnectH2LOperStatus | read-only | mandatory | The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.13 | ColumnatmxVcCrossConnectL2HLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in low to high direction. If the current state w… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.14 | ColumnatmxVcCrossConnectH2LLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in high to low direction. If the current state w… |
| 1.3.6.1.4.1.800.2.9.1.7.1.1.15 | ColumnatmxVcCrossConnectRowStatus | read-write | mandatory | The status of this entry in the atmxVcCrossConnectTable. This object is used to create a new cross-connect for cross-connecting VCLs which are created using th… |
| 1.3.6.1.4.1.800.2.9.1.7.2 | TableatmxSvcVcCrossConnectTable | not-accessible | mandatory | The ATM SVC VC Cross Connect table. A bi- directional SVC VC cross-connect which cross-connects two end points (i.e., VCLs) is modeled as one entry in this tab… |
| 1.3.6.1.4.1.800.2.9.1.7.2.1 | RowatmxSvcVcCrossConnectEntry | not-accessible | mandatory | An entry in the ATM SVC VC Cross Connect table. This entry is used to model a bi-directional ATM SVC VC cross-connect cross-connecting two end points. |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.1 | ColumnatmxSvcVcCrossConnectLowSlotIndex | not-accessible | mandatory | The incoming slot for this SVC. |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.2 | ColumnatmxSvcVcCrossConnectLowPortIndex | not-accessible | mandatory | The incoming port for this SVC. |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.3 | ColumnatmxSvcVcCrossConnectLowVpi | not-accessible | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the SVC VC cross-connect that is identified by atmSvcVcCrossConnectLow(… |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.4 | ColumnatmxSvcVcCrossConnectLowVci | not-accessible | mandatory | The value of this object is equal to the VCI value at the ATM interface associated with this SVC VC cross-connect that is identified by atmSvcVcCrossConnectLow… |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.5 | ColumnatmxSvcVcCrossConnectHighSlotIndex | not-accessible | mandatory | The outgoing slot for this SVC |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.6 | ColumnatmxSvcVcCrossConnectHighPortIndex | not-accessible | mandatory | The outgoing port for this SVC |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.7 | ColumnatmxSvcVcCrossConnectHighVpi | not-accessible | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the SVC VC cross-connect that is identified by atmSvcVcCrossConnectHigh… |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.8 | ColumnatmxSvcVcCrossConnectHighVci | not-accessible | mandatory | The value of this object is equal to the VCI value at the ATM interface associated with the SVC VC cross-connect that is identified by atmSvcVcCrossConnectHigh… |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.9 | ColumnatmxSvcVcCrossConnectCreationTime | read-only | mandatory | The value of MIB II's sysUpTime object at the time this bi-directional SVC VC cross-connect was created. If the current state was entered prior to the last re-… |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.10 | ColumnatmxSvcVcCrossConnectLowTDIndex | read-only | mandatory | The low end connections Traffic Descriptor Index |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.11 | ColumnatmxSvcVcCrossConnectHighTDIndex | read-only | mandatory | The high connections traffic descriptor index |
| 1.3.6.1.4.1.800.2.9.1.7.2.1.12 | ColumnatmxSvcVcCrossConnectRowStatus | read-only | mandatory | This object is used to indicate the status of the SVC in the atmSvcVcCrossConnectTable. |
| 1.3.6.1.4.1.800.2.9.1.8 | NodeatmxTrafficDescrGroup | |||
| 1.3.6.1.4.1.800.2.9.1.8.1 | TableatmxTrafficDescrParamTable | not-accessible | mandatory | This table contains information on ATM traffic descriptor type and the associated parameters. |
| 1.3.6.1.4.1.800.2.9.1.8.1.1 | RowatmxTrafficDescrParamEntry | not-accessible | mandatory | This list contains ATM traffic descriptor type and the associated parameters. |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.1 | ColumnatmxTrafficDescrParamIndex | read-only | mandatory | This object is used by the virtual link table (i.e., VPL or VCL table) to identify the row of this table. For NMS to create a specific entry, the index is limi… |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.2 | ColumnatmxTrafficDescrType | read-write | mandatory | The value of this object identifies the type of ATM traffic descriptor. The type may indicate no traffic descriptor or traffic descriptor with one or more para… |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.3 | ColumnatmxTrafficDescrParam1 | read-write | mandatory | The first parameter of the ATM traffic descriptor used according to the value of atmxTrafficDescrType. |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.4 | ColumnatmxTrafficDescrParam2 | read-write | mandatory | The second parameter of the ATM traffic descriptor used according to the value of atmxTrafficDescrType. |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.5 | ColumnatmxTrafficDescrParam3 | read-write | mandatory | The third parameter of the ATM traffic descriptor used according to the value of atmxTrafficDescrType. |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.6 | ColumnatmxTrafficDescrParam4 | read-write | mandatory | The fourth parameter of the ATM traffic descriptor used according to the value of atmxTrafficDescrType. |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.7 | ColumnatmxTrafficDescrParam5 | read-write | mandatory | The fifth parameter of the ATM traffic descriptor used according to the value of atmxTrafficDescrType. |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.8 | ColumnatmxTrafficQoSClass | read-write | mandatory | The value of this object identifies the QoS Class. Four Service classes have been specified in the ATM Forum UNI Specification: Service Class A: Constant bit r… |
| 1.3.6.1.4.1.800.2.9.1.8.1.1.9 | ColumnatmxTrafficDescrRowStatus | read-write | mandatory | This object is used to create a new row or modify or delete an existing row in this table. An entry cannot be deleted or modified if any VC/VP is using the row |
| 1.3.6.1.4.1.800.2.9.1.9 | NodexylnatmVplGroup | |||
| 1.3.6.1.4.1.800.2.9.1.9.1 | TablexylnatmVplTable | not-accessible | mandatory | This table contains xylan implementation specific objects |
| 1.3.6.1.4.1.800.2.9.1.9.1.1 | RowxylnatmVplEntry | not-accessible | mandatory | List of xylan specific objects |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.1 | ColumnxylnatmVplSlotIndex | read-only | mandatory | Slot Instance |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.2 | ColumnxylnatmVplPortIndex | read-only | mandatory | Port Instance |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.3 | ColumnxylnatmVplVpi | read-only | mandatory | Vpi instance |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.4 | ColumnxylnatmVplConnectionDescr | read-write | mandatory | An ascii value for the connection |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.5 | ColumnxylnatmVplChanType | read-write | mandatory | The type of Virtual path |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.6 | ColumnxylnatmVplTransportPriority | read-write | mandatory | The transport priority... |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.7 | ColumnxylnatmVplUserPriority | read-write | mandatory | The user priority 0-15 with 0 being the highest |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.8 | ColumnxylnatmVplStatsMode | read-write | mandatory | This allows the user one of the 4 choices. When the user selects cntGcraDxCell = count clp0 & 1 and discard cell mrkGcraDxCell = count clp0 & 1, mark efci &clp… |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.9 | ColumnxylnatmVplPrTrackPortBase | read-only | mandatory | The destination internal pport |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.10 | ColumnxylnatmVplPrTrackPort1 | read-only | mandatory | Used under multicast conditions and will be supported in future releases for load balancing |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.11 | ColumnxylnatmVplPrTrackPort2 | read-only | mandatory | Used under multicast conditions and will be supported in future releases for load balancing |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.12 | ColumnxylnatmVplPrTrackPort3 | read-only | mandatory | Used under multicast conditions and will be supported in future releases for load balancing |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.13 | ColumnxylnatmVplAltTrackPortBase | read-only | mandatory | Alternate port under failure conditions and will be supported in future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.14 | ColumnxylnatmVplAltTrackPort1 | read-only | mandatory | Alternate port under failure conditions and will be supported in future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.15 | ColumnxylnatmVplAltTrackPort2 | read-only | mandatory | Alternate port under failure conditions and will be supported in future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.16 | ColumnxylnatmVplAltTrackPort3 | read-only | mandatory | Alternate port under failure conditions and will be supported in future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.17 | ColumnxylnatmVplLgclChanRedirect | read-write | mandatory | Permits the user to allow or not allow logical channel redirects |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.18 | ColumnxylnatmVplAAL5Discard | read-write | mandatory | This field configures an action that IOP should take against cells when traffic congestion occurs. earlyPktDiscard(1) is treated as 'enable' for IOP version 1 … |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.19 | ColumnxylnatmVplF4F5SegEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.20 | ColumnxylnatmVplF4F5CopySeg | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.21 | ColumnxylnatmVplF4F5End2EndEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.22 | ColumnxylnatmVplF4F5CopyEnd2End | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.23 | ColumnxylnatmVplOamEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.24 | ColumnxylnatmVplOamCopy | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.25 | ColumnxylnatmVplRmFwdEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.26 | ColumnxylnatmVplRmFwdCopy | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.27 | ColumnxylnatmVplRmFwdGcraAdv | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.28 | ColumnxylnatmVplRmBkwdEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.29 | ColumnxylnatmVplRmBkwdCopy | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.30 | ColumnxylnatmVplRmBkwdGcraAdv | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.31 | ColumnxylnatmVplRmDiscard | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.32 | ColumnxylnatmVplGcraAPoliceMode | read-only | mandatory | Enforcement mode of GcraA as following gcraEmDxAll = Discard all cells on congestion gcraEmMarkClp0DxClp1 = On congestion discard Clp1 cells gcraEmMarkAllDxAll… |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.33 | ColumnxylnatmVplGcraBPoliceMode | read-only | mandatory | Enforcement mode of GcraB as following gcraEmDxAll = Discard all cells on congestion gcraEmMarkClp0DxClp1 = On congestion discard Clp1 cells gcraEmMarkAllDxAll… |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.34 | ColumnxylnatmVplMcGroupId | read-only | mandatory | Internal use of multicast group id |
| 1.3.6.1.4.1.800.2.9.1.9.1.1.35 | ColumnxylnatmVplMcIngressEgress | read-only | mandatory | Always ingress in this release |
| 1.3.6.1.4.1.800.2.9.1.10 | NodexylnatmVclGroup | |||
| 1.3.6.1.4.1.800.2.9.1.10.1 | TablexylnatmVclTable | not-accessible | mandatory | This table contains xylan implementation specific objects |
| 1.3.6.1.4.1.800.2.9.1.10.1.1 | RowxylnatmVclEntry | not-accessible | mandatory | List of xylan specific objects |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.1 | ColumnxylnatmVclSlotIndex | read-only | mandatory | Slot Instance |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.2 | ColumnxylnatmVclPortIndex | read-only | mandatory | Port Instance |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.3 | ColumnxylnatmVclVpi | read-only | mandatory | Vpi instance |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.4 | ColumnxylnatmVclVci | read-only | mandatory | Vcl instance |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.5 | ColumnxylnatmVclConnectionDescr | read-write | mandatory | An ascii value for the connection |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.6 | ColumnxylnatmVclChanType | read-write | mandatory | The type of Virtual path |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.7 | ColumnxylnatmVclTransportPriority | read-write | mandatory | The transport priority... |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.8 | ColumnxylnatmVclUserPriority | read-write | mandatory | The user priority 0-15, with 0 being the highest |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.9 | ColumnxylnatmVclStatsMode | read-write | mandatory | This allows the user one of the 4 choices. When the user selects cntGcraDxCell = count clp0 & 1 and discard cell mrkGcraDxCell = count clp0 & 1, mark efci &clp… |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.10 | ColumnxylnatmVclPrTrackPortBase | read-only | mandatory | The dest internal pport |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.11 | ColumnxylnatmVclPrTrackPort1 | read-only | mandatory | Used under multicast conditions and will be supported in future releases for load balancing |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.12 | ColumnxylnatmVclPrTrackPort2 | read-only | mandatory | Used under multicast conditions and will be supported in future releases for load balancing |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.13 | ColumnxylnatmVclPrTrackPort3 | read-only | mandatory | Used under multicast conditions and will be supported in future releases for load balancing |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.14 | ColumnxylnatmVclAltTrackPortBase | read-only | mandatory | Alternate port under failure conditions and will be supported in future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.15 | ColumnxylnatmVclAltTrackPort1 | read-only | mandatory | Alternate port under failure conditions and will be supported in future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.16 | ColumnxylnatmVclAltTrackPort2 | read-only | mandatory | Alternate port under failure conditions and will be supported in future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.17 | ColumnxylnatmVclAltTrackPort3 | read-only | mandatory | Alternate port under failure conditions and will be supported in future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.18 | ColumnxylnatmVclLgclChanRedirect | read-write | mandatory | Permits the user to allow or not allow logical channel redirects |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.19 | ColumnxylnatmVclAAL5Discard | read-write | mandatory | This field configures an action that IOP should take against cells when traffic congestion occurs. earlyPktDiscard(1) is treated as 'enable' for IOP version 1 … |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.20 | ColumnxylnatmVclF4F5SegEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.21 | ColumnxylnatmVclF4F5CopySeg | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.22 | ColumnxylnatmVclF4F5End2EndEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.23 | ColumnxylnatmVclF4F5CopyEnd2End | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.24 | ColumnxylnatmVclOamEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.25 | ColumnxylnatmVclOamCopy | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.26 | ColumnxylnatmVclRmFwdEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.27 | ColumnxylnatmVclRmFwdCopy | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.28 | ColumnxylnatmVclRmFwdGcraAdv | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.29 | ColumnxylnatmVclRmBkwdEndpt | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.30 | ColumnxylnatmVclRmBkwdCopy | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.31 | ColumnxylnatmVclRmBkwdGcraAdv | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.32 | ColumnxylnatmVclRmDiscard | read-write | mandatory | Future release |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.33 | ColumnxylnatmVclGcraAPoliceMode | read-only | mandatory | Enforcement mode of GcraA as following gcraEmDxAll = Discard all cells on congestion gcraEmMarkClp0DxClp1 = On congestion discard Clp1 cells gcraEmMarkAllDxAll… |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.34 | ColumnxylnatmVclGcraBPoliceMode | read-only | mandatory | Enforcement mode of GcraB as following gcraEmDxAll = Discard all cells on congestion gcraEmMarkClp0DxClp1 = On congestion discard Clp1 cells gcraEmMarkAllDxAll… |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.35 | ColumnxylnatmVclMcGroupId | read-only | mandatory | Internal use of multicast group id |
| 1.3.6.1.4.1.800.2.9.1.10.1.1.36 | ColumnxylnatmVclMcIngressEgress | read-only | mandatory | Always ingress in this release |
| 1.3.6.1.4.1.800.2.9.1.11 | NodexylnatmVplStatGroup | |||
| 1.3.6.1.4.1.800.2.9.1.11.1 | TablexylnatmVplStatTable | not-accessible | mandatory | This table contains the xylan specific statistical object |
| 1.3.6.1.4.1.800.2.9.1.11.1.1 | RowxylnatmVplStatEntry | not-accessible | mandatory | Contains the stats objects |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.1 | ColumnxylnatmVplStatSlotIndex | read-only | mandatory | The slot number of the chassis |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.2 | ColumnxylnatmVplStatPortIndex | read-only | mandatory | The port number on this slot |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.3 | ColumnxylnatmVplStatVpi | read-only | mandatory | The Vpi number for this connection |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.4 | ColumnxylnatmVplStatRxCells | read-only | mandatory | The total number of cells received on this connection identified by the slot/port/vpi |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.5 | ColumnxylnatmVplStatTxCells | read-only | mandatory | The total number of cells transmitted on this connection identified by the slot/port/vpi |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.6 | ColumnxylnatmVplStatRxClp0Cells | read-only | mandatory | The total number of received cells with Clp0 received on this connection identified by slot/port/vpi |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.7 | ColumnxylnatmVplStatRxClp1Cells | read-only | mandatory | The total number of received cells with Clp1 received on this connection identified by slot/port/vpi |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.8 | ColumnxylnatmVplStatDxCongClp0Cells | read-only | mandatory | The total number of cell loss priority zero cells discarded on this connection at this interface identified by the slot/port due to congestion |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.9 | ColumnxylnatmVplStatDxCongClp1Cells | read-only | mandatory | The total number of cell loss priority one cells discarded on this connection at this interface identified by the slot/port due to congestion |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.10 | ColumnxylnatmVplStatDxGcraClp0Cells | read-only | mandatory | The number of Clp0 cells discarded on this connection due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.11 | ColumnxylnatmVplStatDxGcraClp1Cells | read-only | mandatory | The total number of Clp1 cells discarded due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.12 | ColumnxylnatmVplStatDxGcraBClp0Cells | read-only | mandatory | The number of Clp0 cells discarded on this connection due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.11.1.1.13 | ColumnxylnatmVplStatDxGcraBClp1Cells | read-only | mandatory | The total number of Clp1 cells discarded due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.12 | NodexylnatmVclStatGroup | |||
| 1.3.6.1.4.1.800.2.9.1.12.1 | TablexylnatmVclStatTable | not-accessible | mandatory | This table contains the xylan specific statistical object |
| 1.3.6.1.4.1.800.2.9.1.12.1.1 | RowxylnatmVclStatEntry | not-accessible | mandatory | Contains the stats objects |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.1 | ColumnxylnatmVclStatSlotIndex | read-only | mandatory | The slot number of the chassis |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.2 | ColumnxylnatmVclStatPortIndex | read-only | mandatory | The port number of this slot |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.3 | ColumnxylnatmVclStatVpi | read-only | mandatory | The Vpi number for this connection |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.4 | ColumnxylnatmVclStatVci | read-only | mandatory | The Vci number for the connection |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.5 | ColumnxylnatmVclStatRxCells | read-only | mandatory | The total number of cells received on this connection identified by the slot/port/vpi/vci |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.6 | ColumnxylnatmVclStatTxCells | read-only | mandatory | The total number of cells transmitted on this connection identified by the slot/port/vpi/vci |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.7 | ColumnxylnatmVclStatRxClp0Cells | read-only | mandatory | The total number of received cells with Clp0 received on this connection identified by slot/port/vpi/vci |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.8 | ColumnxylnatmVclStatRxClp1Cells | read-only | mandatory | The total number of received cells with Clp1 received on this connection identified by slot/port/vpi/vci |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.9 | ColumnxylnatmVclStatDxCongClp0Cells | read-only | mandatory | The total number of cell loss priority zero cells discarded on this connection at this interface identified by the slot/port due to congestion |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.10 | ColumnxylnatmVclStatDxCongClp1Cells | read-only | mandatory | The total number of cell loss priority one cells discarded on this connection at this interface identified by the slot/port due to congestion |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.11 | ColumnxylnatmVclStatDxGcraClp0Cells | read-only | mandatory | The number of Clp0 cells discarded on this connection due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.12 | ColumnxylnatmVclStatDxGcraClp1Cells | read-only | mandatory | The total number of Clp1 cells discarded due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.13 | ColumnxylnatmVclStatDxGcraBClp0Cells | read-only | mandatory | The total number of Clp0 cells discarded due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.12.1.1.14 | ColumnxylnatmVclStatDxGcraBClp1Cells | read-only | mandatory | The total number of Clp1 cells discarded due to policing on Clp0+1 cells |
| 1.3.6.1.4.1.800.2.9.1.13 | NodexylnatmVcCrossConnectGroup | |||
| 1.3.6.1.4.1.800.2.9.1.13.1 | TablexylnatmVcCrossConnectTable | not-accessible | mandatory | The ATM VC Cross Connect table. A bi- directional VC cross-connect which cross-connects two end points (i.e., VCLs) is modeled as one entry in this table. |
| 1.3.6.1.4.1.800.2.9.1.13.1.1 | RowxylnatmVcCrossConnectEntry | not-accessible | mandatory | An entry in the ATM VC Cross Connect table. This entry is used to model a bi-directional ATM VC cross-connect cross-connecting two end points. |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.1 | ColumnxylnatmVcCrossConnectLowSlotIndex | read-only | mandatory | The incoming slot number |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.2 | ColumnxylnatmVcCrossConnectLowPortIndex | read-only | mandatory | The value of this object is equal to the ATM interface port in this slot for this VC cross-connect. The term low implies that this ATM interface has the numeri… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.3 | ColumnxylnatmVcCrossConnectLowVpi | read-only | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectLow(Slot/Po… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.4 | ColumnxylnatmVcCrossConnectLowVci | read-only | mandatory | The value of this object is equal to the VCI value at the ATM interface associated with this VC cross-connect that is identified by atmVcCrossConnectLow(Slot/P… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.5 | ColumnxylnatmVcCrossConnectHighSlotIndex | read-only | mandatory | The high port number |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.6 | ColumnxylnatmVcCrossConnectHighPortIndex | read-only | mandatory | The value of this object is equal to the ATM interface port in this slot for this VC cross-connect. The term high implies that this VC cross-connect that this … |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.7 | ColumnxylnatmVcCrossConnectHighVpi | read-only | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHigh(Slot/P… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.8 | ColumnxylnatmVcCrossConnectHighVci | read-only | mandatory | The value of this object is equal to the VCI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHigh(Slot/P… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.9 | ColumnxylnatmVcCrossConnectConnectionId | read-only | mandatory | The status of this object indicates whether the said Vc Cross Connection is the parent or a child. If the connection status is unknown, then the value of this … |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.10 | ColumnxylnatmVcCrossConnectLowRxTrafficDescrIndex | read-write | mandatory | The receive traffic descriptor index. The reason why we duplicate this index is to allow the user to change the traffic descriptor without deleting the connect… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.11 | ColumnxylnatmVcCrossConnectLowTxTrafficDescrIndex | read-write | mandatory | The transmit traffic descriptor index. The reason why we duplicate this index is to allow the user to change the traffic descriptor without deleting the connec… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.12 | ColumnxylnatmVcCrossConnectMCastEnable | read-write | mandatory | Enable/disable multicast as per the ui |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.13 | ColumnxylnatmVcCrossConnectL2HLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in low to high direction. If the current state w… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.14 | ColumnxylnatmVcCrossConnectH2LLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in high to low direction. If the current state w… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.15 | ColumnxylnatmVcCrossConnectL2HOperStatus | read-only | mandatory | The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.16 | ColumnxylnatmVcCrossConnectH2LOperStatus | read-only | mandatory | The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and… |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.17 | ColumnxylnatmVcCrossConnectVcType | read-only | mandatory | The type of VC...Permanent/Switched/ Soft/control |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.18 | ColumnxylnatmVcCrossConnectPvcIdentifier | read-write | mandatory | This is required by NMS to identify PVC's across networks |
| 1.3.6.1.4.1.800.2.9.1.13.1.1.19 | ColumnxylnatmVcCrossConnectRowStatus | read-write | mandatory | This object is used to create, delete or modify a row in this table. To create a new CrossConnect, this object is initially set to 'createAndWait' or 'createAn… |
| 1.3.6.1.4.1.800.2.9.1.14 | NodexylnatmVpCrossConnectGroup | |||
| 1.3.6.1.4.1.800.2.9.1.14.1 | TablexylnatmVpCrossConnectTable | not-accessible | mandatory | The Xyln specific ATM VP Cross Connect table. A bi- directional VP cross-connect which cross-connects two end points (i.e., VPLs) is modeled as one entry in th… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1 | RowxylnatmVpCrossConnectEntry | not-accessible | mandatory | An entry in the ATM VP Cross Connect table. This entry is used to model a bi-directional ATM VP cross-connect cross-connecting two end points. |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.1 | ColumnxylnatmVpCrossConnectLowSlotIndex | read-only | mandatory | The low slot number |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.2 | ColumnxylnatmVpCrossConnectLowPortIndex | read-only | mandatory | The low physical port number |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.3 | ColumnxylnatmVpCrossConnectLowVpi | read-only | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectLow(Slot/Po… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.4 | ColumnxylnatmVpCrossConnectHighSlotIndex | read-only | mandatory | The value of the high slot number |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.5 | ColumnxylnatmVpCrossConnectHighPortIndex | read-only | mandatory | The high physical port number |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.6 | ColumnxylnatmVpCrossConnectHighVpi | read-only | mandatory | The value of this object is equal to the VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectHigh(Slot/P… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.7 | ColumnxylnatmVpCrossConnectConnectionId | read-only | mandatory | The status of this object indicates whether the said Vc Cross Connection is the parent or a child. If the connection status is unknown, then the value of this … |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.8 | ColumnxylnatmVpCrossConnectLowRxTrafficDescrIndex | read-write | mandatory | The receive traffic descriptor index. The reason why we duplicate this index is to allow the user to change the traffic descriptor without deleting the connect… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.9 | ColumnxylnatmVpCrossConnectLowTxTrafficDescrIndex | read-write | mandatory | The transmit traffic descriptor index. The reason why we duplicate this index is to allow the user to change the traffic descriptor without deleting the connec… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.10 | ColumnxylnatmVpCrossConnectMCastEnable | read-write | mandatory | Whether Mcast should be enabled/disabled for this connection |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.11 | ColumnxylnatmVpCrossConnectL2HLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in low to high direction. If the current state w… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.12 | ColumnxylnatmVpCrossConnectH2LLastChange | read-only | mandatory | The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in high to low direction. If the current state w… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.13 | ColumnxylnatmVpCrossConnectL2HOperStatus | read-only | mandatory | The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.14 | ColumnxylnatmVpCrossConnectH2LOperStatus | read-only | mandatory | The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and… |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.15 | ColumnxylnatmVpCrossConnectVcType | read-only | mandatory | The type of VC...Permanent/Switched/Soft/control |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.16 | ColumnxylnatmVpCrossConnectPvcIdentifier | read-write | mandatory | This is required by NMS to id PVC's across networks |
| 1.3.6.1.4.1.800.2.9.1.14.1.1.17 | ColumnxylnatmVpCrossConnectRowStatus | read-write | mandatory | This object is used to create, delete or modify a row in this table. To create a new CrossConnect, this object is initially set to 'createAndWait' or 'createAn… |
| 1.3.6.1.4.1.800.2.9.1.15 | NodexylnatmVclModGroup | |||
| 1.3.6.1.4.1.800.2.9.1.15.1 | TablexylnatmVclModTable | not-accessible | mandatory | This table contains xylan implementation specific objects |
| 1.3.6.1.4.1.800.2.9.1.15.1.1 | RowxylnatmVclModEntry | not-accessible | mandatory | List of xylan specific objects |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.1 | ColumnxylnatmVclModSlotIndex | read-only | mandatory | Slot Instance |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.2 | ColumnxylnatmVclModPortIndex | read-only | mandatory | Port Instance |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.3 | ColumnxylnatmVclModVclVpi | read-only | mandatory | Vpi instance |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.4 | ColumnxylnatmVclModVclVci | read-only | mandatory | Vci instance |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.5 | ColumnxylnatmVclModDestSlotIndex | read-write | mandatory | Slot Instance |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.6 | ColumnxylnatmVclModDestPortIndex | read-write | mandatory | Port Instance |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.7 | ColumnxylnatmVclModDestVclVpi | read-write | mandatory | Vpi instance |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.8 | ColumnxylnatmVclModDestVclVci | read-write | mandatory | Vci instance |
| 1.3.6.1.4.1.800.2.9.1.15.1.1.9 | ColumnxylnatmVclModDestStatus | read-write | mandatory | To be in sync with the ui we allow modification |
| 1.3.6.1.4.1.800.2.9.1.16 | NodexylnatmVplModGroup | |||
| 1.3.6.1.4.1.800.2.9.1.16.1 | TablexylnatmVplModTable | not-accessible | mandatory | This table contains xylan implementation specific objects |
| 1.3.6.1.4.1.800.2.9.1.16.1.1 | RowxylnatmVplModEntry | not-accessible | mandatory | List of xylan specific objects |
| 1.3.6.1.4.1.800.2.9.1.16.1.1.1 | ColumnxylnatmVplModSlotIndex | read-only | mandatory | Slot Instance |
| 1.3.6.1.4.1.800.2.9.1.16.1.1.2 | ColumnxylnatmVplModPortIndex | read-only | mandatory | Port Instance |
| 1.3.6.1.4.1.800.2.9.1.16.1.1.3 | ColumnxylnatmVplModVplVpi | read-only | mandatory | Vpi instance |
| 1.3.6.1.4.1.800.2.9.1.16.1.1.4 | ColumnxylnatmVplModDestSlotIndex | read-write | mandatory | Slot Instance |
| 1.3.6.1.4.1.800.2.9.1.16.1.1.5 | ColumnxylnatmVplModDestPortIndex | read-write | mandatory | Port Instance |
| 1.3.6.1.4.1.800.2.9.1.16.1.1.6 | ColumnxylnatmVplModDestVplVpi | read-write | mandatory | Vpi instance |
| 1.3.6.1.4.1.800.2.9.1.16.1.1.7 | ColumnxylnatmVplModDestStatus | read-write | mandatory | To be in sync with the ui we allow modification |
| 1.3.6.1.4.1.800.2.9.1.17 | NodexylnatmClockingxCtrlGroup | |||
| 1.3.6.1.4.1.800.2.9.1.17.1 | TablexylnatmClockingxCtrlTable | not-accessible | mandatory | A table of Clocking configuration and control information. |
| 1.3.6.1.4.1.800.2.9.1.17.1.1 | RowxylnatmClockingxCtrlEntry | not-accessible | mandatory | An entry in the Clocking Configuration/control table, containing information about Cell Switching Module (CSM) clocking. |
| 1.3.6.1.4.1.800.2.9.1.17.1.1.1 | ColumnxylnatmClockingxCtrlBusLine | read-only | mandatory | The Bus Signal function used for clocking CSM modules. This is used as a unique ID to identify a clocking line on the bus. |
| 1.3.6.1.4.1.800.2.9.1.17.1.1.2 | ColumnxylnatmClockingxCtrlSrcLevel | read-only | mandatory | This object identifies which source entry type for this row in the table. Primary is the preffered source, if the primary source clock is not available, then t… |
| 1.3.6.1.4.1.800.2.9.1.17.1.1.3 | ColumnxylnatmClockingxSrcOperState | read-only | mandatory | This object identifies the state of the clock source. inactive(1) indicates the source is not available for use. active(2) indicates the source is currently be… |
| 1.3.6.1.4.1.800.2.9.1.17.1.1.4 | ColumnxylnatmClockingxSrcType | read-write | mandatory | This object controls the type of clock used as the source for the bus line. If 'notConfigured', then this source isn't configured. If 'receiveDataDerived' then… |
| 1.3.6.1.4.1.800.2.9.1.17.1.1.5 | ColumnxylnatmClockingxCtrlSlot | read-write | mandatory | This object is used to configure the slot of the port used to drive the bus. This object will return 0 if not configured. For setting this object only a non-ze… |
| 1.3.6.1.4.1.800.2.9.1.17.1.1.6 | ColumnxylnatmClockingxCtrlPort | read-write | mandatory | This object is used to configure the port number used to drive the bus. This object will return 0 if not configured. For setting this object only a non-zero va… |
| 1.3.6.1.4.1.800.2.9.1.17.2 | ScalarxylnatmClockingxGlobalCST | read-write | mandatory | This object is used to specify the time period (in seconds) that the primary clock source should be up before the switching software resumes its role in drivin… |
| 1.3.6.1.4.1.800.2.9.1.18 | NodexylnatmTrafficShaperConfGroup | |||
| 1.3.6.1.4.1.800.2.9.1.18.1 | TablexylnatmTrafficShaperConfTable | not-accessible | mandatory | A table of Traffic Shapers' configuration information. Currently, traffic shaping function is available on module types CSM-AB-OC3 and CSM-AB-DS3/E3 only. |
| 1.3.6.1.4.1.800.2.9.1.18.1.1 | RowxylnatmTrafficShaperConfEntry | not-accessible | mandatory | An entry in the Traffic Shaper Configuration table containing parameters of the traffic shapers of cell switching module. |
| 1.3.6.1.4.1.800.2.9.1.18.1.1.1 | ColumnxylnatmTrafficShaperConfSlotIndex | read-only | mandatory | The slot on which the traffic shaping module resides. |
| 1.3.6.1.4.1.800.2.9.1.18.1.1.2 | ColumnxylnatmTrafficShaperConfPortIndex | read-only | mandatory | The port on which traffic shaping circuitry resides. A CSM-AB module can have either one or two traffic shaping ports. If the module has one traffic shaping po… |
| 1.3.6.1.4.1.800.2.9.1.18.1.1.3 | ColumnxylnatmTrafficShaperConfTsNumIndex | read-only | mandatory | This object identifies the traffic shaper number on the port. On each port, there are eight traffic shapers whose bandwidth are allocated based on configurable… |
| 1.3.6.1.4.1.800.2.9.1.18.1.1.4 | ColumnxylnatmTrafficShaperConfCDV | read-write | mandatory | This object is used to specify the Cell Delay Variation of the outgoing cell stream of a shaper. CDV is one of the parameters configured to alter the character… |
| 1.3.6.1.4.1.800.2.9.1.18.1.1.5 | ColumnxylnatmTrafficShaperConfPCR | read-write | mandatory | This object is used to configure the Peak Cell Rate of a shaper. PCR is one of the parameters set to alter the characteristics of the cell streams to acquire a… |
| 1.3.6.1.4.1.800.2.9.1.18.1.1.6 | ColumnxylnatmTrafficShaperConfSCR | read-write | mandatory | This object is used to configure the Sustainable Cell Rate of a shaper. SCR is the average conforming cell rate an ATM connection measured over a time interval… |
| 1.3.6.1.4.1.800.2.9.1.18.1.1.7 | ColumnxylnatmTrafficShaperConfMBS | read-write | mandatory | This object is used to configure the Maximum Brust Size of the outgoing cell streams of a shaper. MBS is one of the parameters set to alter the characteristics… |
| 1.3.6.1.4.1.800.2.9.1.19 | NodexylnatmTrafficShaperMemGroup | |||
| 1.3.6.1.4.1.800.2.9.1.19.1 | TablexylnatmTrafficShaperMemTable | not-accessible | mandatory | A table of Traffic Shapers' VPI/VCI Membership information. Currently, traffic shaping function is available on module types CSM-AB-OC3 and CSM-AB-DS3/E3 only.… |
| 1.3.6.1.4.1.800.2.9.1.19.1.1 | RowxylnatmTrafficShaperMemEntry | not-accessible | mandatory | An entry in the Traffic Shaper Membership table containing a VPI/VCI number mapping to a traffic shaper number. |
| 1.3.6.1.4.1.800.2.9.1.19.1.1.1 | ColumnxylnatmTrafficShaperMemSlotIndex | read-only | mandatory | The slot on which the traffic shaping module resides. |
| 1.3.6.1.4.1.800.2.9.1.19.1.1.2 | ColumnxylnatmTrafficShaperMemPortIndex | read-only | mandatory | The port on which traffic shaping circuitry resides. A CSM-AB module can have either one or two traffic shaping ports. If the module has one traffic shaping po… |
| 1.3.6.1.4.1.800.2.9.1.19.1.1.3 | ColumnxylnatmTrafficShaperMemTsNumIndex | read-only | mandatory | This object identifies the traffic shaper number on the port. Each port provides mapping of up to 512 VPI/VCI to the eight shapers. Non-specified VPI/VCI is lo… |
| 1.3.6.1.4.1.800.2.9.1.19.1.1.4 | ColumnxylnatmTrafficShaperMemVpiNumIndex | read-write | mandatory | This object is used to register a VPI to a traffic shaper. The outgoing cell streams with this VPI is shaped by the traffic shaper it registers to. The valid r… |
| 1.3.6.1.4.1.800.2.9.1.19.1.1.5 | ColumnxylnatmTrafficShaperMemVciNumIndex | read-write | mandatory | This object is used to register a VCI to a traffic shaper. The outgoing cell streams with this VCI is shaped by the traffic shaper it registers to. The valid r… |
| 1.3.6.1.4.1.800.2.9.1.19.1.1.6 | ColumnxylnatmTrafficShaperMemVpiOper | read-write | mandatory | This object is used to register or de-register a VPI/VCI to or out of a traffic shaper. none(1) when VPI/VCI is not registered/ de-register to/from the shaper.… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmxTrafficDescrParamIndex | INTEGER (0..2147483647) |