XYLAN-WSM-MIB
25 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.7.1 | NodewsmPortGroup | |||
| 1.3.6.1.4.1.800.2.7.1.1 | TablewsmPortTable | not-accessible | mandatory | A table of port layer status and parameter information for the WSM's physical interfaces. |
| 1.3.6.1.4.1.800.2.7.1.1.1 | RowwsmPortEntry | not-accessible | mandatory | An entry in the table, containing information about the physical layer of a WSM interface. |
| 1.3.6.1.4.1.800.2.7.1.1.1.1 | ColumnwsmPortSlotIndex | read-only | mandatory | A unique value which identifies this HSM board slot. |
| 1.3.6.1.4.1.800.2.7.1.1.1.2 | ColumnwsmPortPortIndex | read-only | mandatory | A unique value which identifies this WSM submodule port. |
| 1.3.6.1.4.1.800.2.7.1.1.1.3 | ColumnwsmPortInterfaceType | read-only | mandatory | The type of interface on this WSM physical port. |
| 1.3.6.1.4.1.800.2.7.1.1.1.4 | ColumnwsmPortCableType | read-only | mandatory | The type of cable attached to the universal serial port. Non Universal Serial Ports will always return 'unknown'. NOTE: RS-449 cables will return as RS-530 as … |
| 1.3.6.1.4.1.800.2.7.1.1.1.5 | ColumnwsmPortSerialRxClockPol | read-write | mandatory | The receive clock polarity. It is inverted or not inverted. For interfaces that do not support this, the value will be stored but ignored. |
| 1.3.6.1.4.1.800.2.7.1.1.1.6 | ColumnwsmPortSerialTxClockPol | read-write | mandatory | The Transmit clock polarity. It is inverted or not inverted. For interfaces that do not support this, the value will be stored but ignored. |
| 1.3.6.1.4.1.800.2.7.1.1.1.7 | ColumnwsmPortFunctionType | read-only | mandatory | The functional capability of the port. This allows the Manager code to determine the capabilities of the port so the proper data can be managed based on the fu… |
| 1.3.6.1.4.1.800.2.7.1.1.1.8 | ColumnwsmPortProtocol | read-write | mandatory | The layer 2 protocol of the port. This parameter only applies when wsmPortFunctionType is equal to frameType(1). For ports that don't support this (e.g. Circui… |
| 1.3.6.1.4.1.800.2.7.1.1.1.9 | ColumnwsmPortIfIndex | read-only | mandatory | The ifIndex of the WAN port. This parameter is used in order to get the physical port Index used for SNMP standard MIBs that use ifIndex instead of slot/port. |
| 1.3.6.1.4.1.800.2.7.1.1.1.10 | ColumnwsmPortT1E1StartingTimeSlot | read-write | mandatory | Starting TimeSlot for Fractional T1E1 board. This is only use for Fractional T1E1 board type. Valid Range: T1: 1..24 E1: 1..31 (May need to skip 16) The valid … |
| 1.3.6.1.4.1.800.2.7.1.1.1.11 | ColumnwsmPortT1E1NumberOfTimeSlot | read-write | mandatory | Number of TimeSlot for Fractional T1E1 board. This is only use for Fractional T1E1 board type. Valid Range: T1: 1..24 E1: 1..31 The valid range may be effected… |
| 1.3.6.1.4.1.800.2.7.2 | NodewsmLinkGroup | |||
| 1.3.6.1.4.1.800.2.7.2.1 | TablelinkxTable | not-accessible | mandatory | A table of WAN link(s) configuration information. |
| 1.3.6.1.4.1.800.2.7.2.1.1 | RowlinkxEntry | not-accessible | mandatory | An entry in the WAN link Configuration table, containing information about a single link's configuration. |
| 1.3.6.1.4.1.800.2.7.2.1.1.1 | ColumnlinkxPeerID | read-only | mandatory | The peer ID. This is used as a unique ID to identify a remote entity and to associate links to it. For example, for 'normal' PPP, there is one entry in the lin… |
| 1.3.6.1.4.1.800.2.7.2.1.1.2 | ColumnlinkxIfIndex | read-only | mandatory | The ifIndex of the Link. This is used as a unique ID to identify an individual WAN link entity. |
| 1.3.6.1.4.1.800.2.7.2.1.1.3 | ColumnlinkxDescription | read-write | mandatory | A description for this WAN link. |
| 1.3.6.1.4.1.800.2.7.2.1.1.4 | ColumnlinkxAdminStatus | read-write | mandatory | This object controls the Administrative Status of this WAN Link Entity. Enabled will allow the Link Entity to operate. Disabled will disable the Link Entity wi… |
| 1.3.6.1.4.1.800.2.7.2.1.1.5 | ColumnlinkxType | read-write | mandatory | The type of link. A wsmPort type is for WSM serial and Fractional T1 ports. An ISDN call is for incoming or outgoing ISDN calls. Additional information can the… |
| 1.3.6.1.4.1.800.2.7.2.1.1.6 | ColumnlinkxSlot | read-write | mandatory | The slot that is Link is on or zero if the link is not tied to a given slot (e.g. for ISDN incoming calls). If type is wsmPort(1), this must be a non-zero valu… |
| 1.3.6.1.4.1.800.2.7.2.1.1.7 | ColumnlinkxPort | read-write | mandatory | The port that is Link is on or zero if the link is not tied to a given port (e.g. for ISDN incoming calls or Multilink PPP that requires to run Multilink with … |
| 1.3.6.1.4.1.800.2.7.2.1.1.8 | ColumnlinkxMode | read-write | mandatory | This object define whether the given link is to be a On-Demand Link or it is use for Backup. |