XYLO-PROTOCOL-MIB
102 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.7.1 | ScalaranxLatRecvRunMsgs | read-only | deprecated | Total received run messages. |
| 1.3.6.1.4.1.15.2.7.2 | ScalaranxLatXmitRunMsgs | read-only | deprecated | Total transmitted run messages. |
| 1.3.6.1.4.1.15.2.7.3 | ScalaranxLatRecvSlots | read-only | deprecated | Total received slots. |
| 1.3.6.1.4.1.15.2.7.4 | ScalaranxLatXmitSlots | read-only | deprecated | Total transmitted slots. |
| 1.3.6.1.4.1.15.2.7.5 | ScalaranxLatRecvBytes | read-only | deprecated | Total recevied bytes. |
| 1.3.6.1.4.1.15.2.7.6 | ScalaranxLatXmitBytes | read-only | deprecated | Total transmitted bytes. |
| 1.3.6.1.4.1.15.2.7.7 | ScalaranxLatDupMsgs | read-only | deprecated | Total duplicate messages. |
| 1.3.6.1.4.1.15.2.7.8 | ScalaranxLatRexmitMsgs | read-only | deprecated | Total retransmitted messages. |
| 1.3.6.1.4.1.15.2.7.9 | ScalaranxLatBadCircuitMsgs | read-only | deprecated | Total bad circuit messages. |
| 1.3.6.1.4.1.15.2.7.10 | ScalaranxLatBadSlotMsgs | read-only | deprecated | Total bad circuit slots. |
| 1.3.6.1.4.1.15.2.7.11 | ScalaranxLatAcceptHostInits | read-only | deprecated | Total accepted host-initiates. |
| 1.3.6.1.4.1.15.2.7.12 | ScalaranxLatRejectHostInits | read-only | deprecated | Total rejected host-initiates. |
| 1.3.6.1.4.1.15.2.7.13 | ScalaranxLatMultipleNodes | read-only | deprecated | Total multiple nodes seen. |
| 1.3.6.1.4.1.15.2.7.14 | ScalaranxLatCreatedCircuits | read-only | deprecated | Total created circuits. |
| 1.3.6.1.4.1.15.2.7.15 | ScalaranxLatCreatedSessions | read-only | deprecated | Total created sessions. |
| 1.3.6.1.4.1.15.2.7.16 | ScalaranxLatRecvFrames | read-only | deprecated | Total received frames. |
| 1.3.6.1.4.1.15.2.7.17 | ScalaranxLatXmitFrames | read-only | deprecated | Total transmitted frames. |
| 1.3.6.1.4.1.15.2.7.18 | ScalaranxLatIllegalFrames | read-only | deprecated | Total illegal frames. |
| 1.3.6.1.4.1.15.2.7.19 | ScalaranxLatCircuitTimeouts | read-only | deprecated | Total circuit timeouts. |
| 1.3.6.1.4.1.15.2.7.20 | ScalaranxLatXmitSvcMsgs | read-only | deprecated | Total transmitted service messages. |
| 1.3.6.1.4.1.15.2.7.21 | ScalaranxLatRecvSvcMsgs | read-only | deprecated | Total received service messages. |
| 1.3.6.1.4.1.15.2.7.22 | ScalaranxLatUsedSvcMsgs | read-only | deprecated | Total used service messages. |
| 1.3.6.1.4.1.15.2.8.1 | TableinterfaceRipTable | not-accessible | mandatory | Table of common RIP protocol parameters. The first two obects in this table (interfaceRipIndex and interfaceRipName) apply to all interfaces including asyc, sy… |
| 1.3.6.1.4.1.15.2.8.1.1 | RowinterfaceRipEntry | not-accessible | mandatory | The interface's RIP protocol configuration parameters. |
| 1.3.6.1.4.1.15.2.8.1.1.1 | ColumninterfaceRipIndex | read-only | mandatory | A unique number from 1 to n + m + 1 where: n = the number of asynchronous ports on the Annex m = the number of synchronous ports on the Annex The values of thi… |
| 1.3.6.1.4.1.15.2.8.1.1.2 | ColumninterfaceRipName | read-only | mandatory | The name of the interface. This is presently the same as the value returned for ifDescr (from MIB-II) for this interface. |
| 1.3.6.1.4.1.15.2.8.1.1.3 | ColumninterfaceRipSendVersion | read-write | mandatory | Controls the RIP version which is sent. rip-1 causes version 1 packets to be sent using version 1 subsumption rules. rip-2 causes version 2 packets to be sent.… |
| 1.3.6.1.4.1.15.2.8.1.1.4 | ColumninterfaceRipRecvVersion | read-write | mandatory | Controls the RIP version which the Annex accepts. rip-1 causes only version 1 packets to be accepted. rip-2 causes only version 2 packets to be accepted. both … |
| 1.3.6.1.4.1.15.2.8.1.1.5 | ColumninterfaceRipHorizon | read-write | mandatory | Controls the split horizon algorithm. Specifying off disables split horizon. split enables split horizon without poison reverse. poison enables split horizon w… |
| 1.3.6.1.4.1.15.2.8.1.1.6 | ColumninterfaceRipDefRoute | read-write | mandatory | Controls whether the Annex advertises itself as a default router. This parameter takes effect only when active RIP is enabled. The value 0 prevents the Annex f… |
| 1.3.6.1.4.1.15.2.8.1.1.7 | ColumninterfaceRipAdvertise | read-write | mandatory | A list of network addresses for which the Annex will advertise routes by sending RIP updates. Special values include 'all' (all routes are advertised), 'none' … |
| 1.3.6.1.4.1.15.2.8.1.1.8 | ColumninterfaceRipSubAdvertise | read-write | mandatory | Controls whether subnet routes are advertised. This MIB object corresponds to the NA/admin Annex parameter 'rip_sub_advertise'. |
| 1.3.6.1.4.1.15.2.8.1.1.9 | ColumninterfaceRipAccept | read-write | mandatory | A list of network addresses for which RIP updates will be accepted. Special values include 'all' (RIP updates are accepted for any network), 'none' (no RIP upd… |
| 1.3.6.1.4.1.15.2.8.1.1.10 | ColumninterfaceRipSubAccept | read-write | mandatory | Controls whether subnet routes are accepted. This MIB object corresponds to the NA/admin Annex parameter 'rip_sub_accept'. |
| 1.3.6.1.4.1.15.2.8.1.1.11 | ColumninterfaceRipNextHop | read-write | mandatory | Control whether next hop value is included in version 2 advertisements. This MIB object corresponds to the NA/admin Annex parameter 'rip_next_hop'. |
| 1.3.6.1.4.1.15.2.13.1 | NodeanxifMP | |||
| 1.3.6.1.4.1.15.2.13.1.1 | TablempStatsTable | not-accessible | mandatory | Table of MP active bundle statistics. |
| 1.3.6.1.4.1.15.2.13.1.1.1 | RowmpStatsEntry | not-accessible | mandatory | Mutilink PPP active bundle statistics. |
| 1.3.6.1.4.1.15.2.13.1.1.1.1 | ColumnmpStatsifIndex | read-only | mandatory | MP interface number. This number can be obtained from the ifTable. |
| 1.3.6.1.4.1.15.2.13.1.1.1.2 | ColumnmpStatsPeakLink | read-only | mandatory | This parameter returns the peak number of links used in this bundle. This MIB object corresponds to the NA/admin asynchronous, ta, and synchronous port paramet… |
| 1.3.6.1.4.1.15.2.13.1.1.1.3 | ColumnmpStatsTxPkts | read-only | mandatory | Number of packet transmitted to MLCP. |
| 1.3.6.1.4.1.15.2.13.1.1.1.4 | ColumnmpStatsRxPkts | read-only | mandatory | Number of packet received from MLCP. |
| 1.3.6.1.4.1.15.2.13.1.1.1.5 | ColumnmpStatsFragPkts | read-only | mandatory | Number of packet fragmented. |
| 1.3.6.1.4.1.15.2.13.1.1.1.6 | ColumnmpStatsFragLost | read-only | mandatory | Number of fragments lost. |
| 1.3.6.1.4.1.15.2.13.1.1.1.7 | ColumnmpStatsTxFrag | read-only | mandatory | Number of fragments generated for transmission. |
| 1.3.6.1.4.1.15.2.13.1.1.1.8 | ColumnmpStatsRxFrag | read-only | mandatory | Number of fragments assembled by MLCP. |
| 1.3.6.1.4.1.15.2.13.1.1.1.9 | ColumnmpStatsLostPkts | read-only | mandatory | Number of packets lost. |
| 1.3.6.1.4.1.15.2.13.1.1.1.10 | ColumnmpStatsTxUtil | read-only | mandatory | Transmit Utilization. |
| 1.3.6.1.4.1.15.2.13.1.1.1.11 | ColumnmpStatsRxUtil | read-only | mandatory | Receive Utilization. |
| 1.3.6.1.4.1.15.2.13.1.2 | ScalarmpMrru | read-write | deprecated | This parameter sets the upper limit of the MRRU LCP negotiation. All LCP negotiations will start with this value; negotiation downward only is allowed. The def… |
| 1.3.6.1.4.1.15.2.13.1.3 | ScalarmpEndPointClass | read-write | deprecated | This parameter sets the preference for the Endpoint Discriminator. Classes Locally Assigned Address (2), and PPP Magic Number Block(5) are excluded; they do no… |
| 1.3.6.1.4.1.15.2.13.1.4 | ScalarmpEndPointValue | read-write | deprecated | This parameter sets the value of the Endpoint Discriminator for options that require user-configured information. This parameter is only valid when gpMPEndPoin… |
| 1.3.6.1.4.1.15.2.13.1.5 | TablepppStatsTable | not-accessible | mandatory | Table of active PPP statistics. |
| 1.3.6.1.4.1.15.2.13.1.5.1 | RowpppStatsEntry | not-accessible | mandatory | Mutilink PPP active bundle statistics. |
| 1.3.6.1.4.1.15.2.13.1.5.1.1 | ColumnpppStatsIndex | read-only | mandatory | PPP interface number. For PPP statistics for individual link under MP, this is MP interface number. This number can be obtained from the ifTable. |
| 1.3.6.1.4.1.15.2.13.1.5.1.2 | ColumnpppStatsBundleId | read-only | mandatory | This object identifies the MP bundle with which this PPP interface is associated with. If the PPP interface is not associated with MP then this value will be z… |
| 1.3.6.1.4.1.15.2.13.1.5.1.3 | ColumnpppStatsBadAddresses | read-only | mandatory | The number of packets received with an incorrect Address Field. This counter is a component of the ifInErrors variable that is associated with the interface th… |
| 1.3.6.1.4.1.15.2.13.1.5.1.4 | ColumnpppStatsBadControls | read-only | mandatory | The number of packets received on this link with an incorrect Control Field. This counter is a component of the ifInErrors variable that is associated with the… |
| 1.3.6.1.4.1.15.2.13.1.5.1.5 | ColumnpppStatsPacketTooLongs | read-only | mandatory | The number of received packets that have been discarded because their length exceeded the MRU. This counter is a component of the ifInErrors variable that is a… |
| 1.3.6.1.4.1.15.2.13.1.5.1.6 | ColumnpppStatsBadFCSs | read-only | mandatory | The number of received packets that have been discarded due to having an incorrect FCS. This counter is a component of the ifInErrors variable that is associat… |
| 1.3.6.1.4.1.15.2.13.1.5.1.7 | ColumnpppStatsLocalMRU | read-only | mandatory | The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity. The … |
| 1.3.6.1.4.1.15.2.13.1.5.1.8 | ColumnpppStatsRemoteMRU | read-only | mandatory | The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP entity. The… |
| 1.3.6.1.4.1.15.2.13.1.5.1.9 | ColumnpppStatsLocalToPeerACCMap | read-only | mandatory | The current value of the ACC Map used for sending packets from the local PPP entity to the remote PPP entity. The value of this object is meaningful only when … |
| 1.3.6.1.4.1.15.2.13.1.5.1.10 | ColumnpppStatsPeerToLocalACCMap | read-only | mandatory | The ACC Map used by the remote PPP entity when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reac… |
| 1.3.6.1.4.1.15.2.13.1.5.1.11 | ColumnpppStatsLocalToRemoteProtocolCompression | read-only | mandatory | Indicates whether the local PPP entity will use Protocol Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful… |
| 1.3.6.1.4.1.15.2.13.1.5.1.12 | ColumnpppStatsRemoteToLocalProtocolCompression | read-only | mandatory | Indicates whether the remote PPP entity will use Protocol Compression when transmitting packets to the local PPP entity. The value of this object is meaningful… |
| 1.3.6.1.4.1.15.2.13.1.5.1.13 | ColumnpppStatsLocalToRemoteACCompression | read-only | mandatory | Indicates whether the local PPP entity will use Address and Control Compression when transmitting packets to the remote PPP entity. The value of this object is… |
| 1.3.6.1.4.1.15.2.13.1.5.1.14 | ColumnpppStatsRemoteToLocalACCompression | read-only | mandatory | Indicates whether the remote PPP entity will use Address and Control Compression when transmitting packets to the local PPP entity. The value of this object is… |
| 1.3.6.1.4.1.15.2.13.1.5.1.15 | ColumnpppStatsTransmitFcsSize | read-only | mandatory | The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. The value of this object is meani… |
| 1.3.6.1.4.1.15.2.13.1.5.1.16 | ColumnpppStatsReceiveFcsSize | read-only | mandatory | The size of the Frame Check Sequence (FCS) in bits that the remote node will generate when sending packets to the local node. The value of this object is meani… |
| 1.3.6.1.4.1.15.2.13.2 | NodeanxifOspf | |||
| 1.3.6.1.4.1.15.2.13.2.1 | TableanxOspfIfTable | not-accessible | mandatory | Table of OSPF parameters configures or collected on a per-interface basis. This table is only vailid for ethernet-like interface devices. |
| 1.3.6.1.4.1.15.2.13.2.1.1 | RowanxOspfIfTableEntry | not-accessible | mandatory | OSPF configuration and statistical information gathered on a per-interface basis. |
| 1.3.6.1.4.1.15.2.13.2.1.1.1 | ColumnanxOspfIfIndex | read-only | mandatory | OSPF interface number. |
| 1.3.6.1.4.1.15.2.13.2.1.1.2 | ColumnanxOspfIfMd5Key1 | read-write | mandatory | The primary MD5 key. This object corresponds to the na/admin parameter ospf_md5k1. |
| 1.3.6.1.4.1.15.2.13.2.1.1.3 | ColumnanxOspfIfMd5Key2 | read-write | mandatory | The primary MD5 key. This object corresponds to the na/admin parameter ospf_md5k2. |
| 1.3.6.1.4.1.15.2.13.2.1.1.4 | ColumnanxOspfIfActiveMd5 | read-write | mandatory | Specifies which MD5 key to use for encryption. This object corresponds to the na/admin parameter ospf_activemd5. The default value is 'primary'. |
| 1.3.6.1.4.1.15.2.13.2.1.1.5 | ColumnanxOspfIfState | read-write | mandatory | The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The va… |
| 1.3.6.1.4.1.15.2.13.2.1.1.6 | ColumnanxOspfIfPriority | read-write | mandatory | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.15.2.13.2.1.1.7 | ColumnanxOspfIfTransDelay | read-write | mandatory | The estimated number of seconds it takes to transmit a link state update packet over this interface. This object corresponds to the na/admin parameter ospf_tra… |
| 1.3.6.1.4.1.15.2.13.2.1.1.8 | ColumnanxOspfIfRetransInterval | read-write | mandatory | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.15.2.13.2.1.1.9 | ColumnanxOspfIfHelloInterval | read-write | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a c… |
| 1.3.6.1.4.1.15.2.13.2.1.1.10 | ColumnanxOspfIfDeadInterval | read-write | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.15.2.13.2.1.1.11 | ColumnanxOspfIfAuthKey | read-write | mandatory | The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero … |
| 1.3.6.1.4.1.15.2.13.2.1.1.12 | ColumnanxOspfIfAuthType | read-write | mandatory | The authentication type specified for an in- terface. Additional authentication types may be assigned locally. This object corresponds to the na/admin paramete… |
| 1.3.6.1.4.1.15.2.13.2.1.1.13 | ColumnanxOspfIfCost | read-write | mandatory | The metric of using this type of service on this interface. This object corresponds to the na/admin parameter ospf_cost. It can also be accessed through the RF… |
| 1.3.6.1.4.1.15.2.13.2.1.1.14 | ColumnanxOspfIfIpAddress | read-only | mandatory | The IP address of this interface. |
| 1.3.6.1.4.1.15.2.13.2.1.1.15 | ColumnanxOspfIfAreaId | read-only | mandatory | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. This object can also be accessed… |
| 1.3.6.1.4.1.272.4.26.1 | TableipsecStatTable | not-accessible | mandatory | Table of Ipsec Netstat information. This table is supported on the 5399/rac8000 platforms. |
| 1.3.6.1.4.1.272.4.26.1.1 | RowipsecStatEntry | not-accessible | mandatory | The Ipsec Netstat information. |
| 1.3.6.1.4.1.272.4.26.1.1.1 | ColumnipsecStatIndex | read-only | mandatory | The index, from 1-120, which uniquely identifies the security association entry. This index is only used by snmp. |
| 1.3.6.1.4.1.272.4.26.1.1.2 | ColumnipsecSpiNumber | read-only | mandatory | A 32-bit unique identifier, in addition with destination address for an IP packet (inbound traffic) and IPSEC protocol (AH/ESP) to globally identify a security… |
| 1.3.6.1.4.1.272.4.26.1.1.3 | ColumnipsecSequenceNumber | read-only | mandatory | A 32-bit value used to generate the sequence number field in AH and ESP headers, only used for outbound traffic. |
| 1.3.6.1.4.1.272.4.26.1.1.4 | ColumnipsecLifeTime | read-only | mandatory | � Lifetime of this security association. It can be either counted in bytes or counted in seconds since the security association is activated. |
| 1.3.6.1.4.1.272.4.26.1.1.5 | ColumnipsecIpAddress | read-only | mandatory | The destination address of an IP packet (inbound traffic). |
| 1.3.6.1.4.1.272.4.26.1.1.6 | ColumnipsecProtocol | read-only | mandatory | AH (Authentication Header) and/or ESP (Encapsulation Security Payload) can be applied to an IPSEC packet. AH provides authentication for the IP packet and ESP … |
| 1.3.6.1.4.1.272.4.26.1.1.7 | ColumnipsecAntiReplayWindow | read-only | mandatory | A 32-bit counter used to determine whether an inbound AH or ESP packet is a reply. Used only for inbound traffic. It is always set to zero for the first ANNEX … |
| 1.3.6.1.4.1.272.4.26.1.1.8 | ColumnipsecProtocolMode | read-only | mandatory | Indicates which security transformation (AH or ESP) is applied to the traffic on this SA. |
| 1.3.6.1.4.1.272.4.26.1.1.9 | ColumnipsecAuthAlgorithm | read-only | mandatory | Both SHA-1 (Secure Hash Algorithm) and MD5 are supported. If the authentication service is not selected (ipsecProtocol is not set to both), this will be set to… |
| 1.3.6.1.4.1.272.4.26.1.1.10 | ColumnipsecEncAlogorithm | read-only | mandatory | The encription algorithm. Only available when ipsecProtocol is set to ESP. Otherwise it returns none(1). |
| 1.3.6.1.4.1.272.4.26.1.1.11 | ColumnipsecEncMode | read-only | mandatory | The encription mode. Only available when ipsecProtocol is set to ESP. Otherwise it returns none(1). |
| 1.3.6.1.4.1.272.4.26.2 | ScalaripsecEnable | read-write | mandatory | Setting this object enables or disables ip security (ipsec) on the RAC. |