XYPLEX-CONCATENATED-MIB
923 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises experimental Gauge IpAddress mgmt NetworkAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 0.0 | ScalarcharPortHardware | read-only | mandatory | |
| 0.0 | ScalarcharSessConnectionId | read-only | mandatory | |
| 0.0 | NodenullConnectionId | |||
| 0.0 | NodenullHardware | |||
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.1.1 | ScalarsysDescr | read-only | mandatory | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.2.1.1.2 | ScalarsysObjectID | read-only | mandatory | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.2.1.1.3 | ScalarsysUpTime | read-only | mandatory | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.2.1.1.4 | ScalarsysContact | read-write | mandatory | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.2.1.1.5 | ScalarsysName | read-write | mandatory | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.2.1.1.6 | ScalarsysLocation | read-write | mandatory | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.2.1.1.7 | ScalarsysServices | read-only | mandatory | A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye… |
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.2.1 | ScalarifNumber | read-only | mandatory | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.2.1.2.2 | TableifTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.2.1.2.2.1 | RowifEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.2.1.2.2.1.1 | ColumnifIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.2.1.2.2.1.2 | ColumnifDescr | read-only | mandatory | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.2.1.2.2.1.3 | ColumnifType | read-only | mandatory | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.2.1.2.2.1.4 | ColumnifMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.2.1.2.2.1.5 | ColumnifSpeed | read-only | mandatory | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.2.1.2.2.1.6 | ColumnifPhysAddress | read-only | mandatory | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.2.1.2.2.1.7 | ColumnifAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.8 | ColumnifOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.2.1.2.2.1.9 | ColumnifLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.2.1.2.2.1.10 | ColumnifInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.11 | ColumnifInUcastPkts | read-only | mandatory | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.12 | ColumnifInNUcastPkts | read-only | mandatory | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.13 | ColumnifInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.2.1.2.2.1.14 | ColumnifInErrors | read-only | mandatory | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.2.1.2.2.1.15 | ColumnifInUnknownProtos | read-only | mandatory | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.2.2.1.16 | ColumnifOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.2.1.2.2.1.17 | ColumnifOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.2.1.2.2.1.18 | ColumnifOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.2.1.2.2.1.19 | ColumnifOutDiscards | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.2.1.2.2.1.20 | ColumnifOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.2.1.2.2.1.21 | ColumnifOutQLen | read-only | mandatory | The length of the output packet queue (in packets). |
| 1.3.6.1.2.1.2.2.1.22 | ColumnifSpecific | read-only | mandatory | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, … |
| 1.3.6.1.2.1.3 | Nodeat | |||
| 1.3.6.1.2.1.3.1 | TableatTable | not-accessible | deprecated | The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining add… |
| 1.3.6.1.2.1.3.1.1 | RowatEntry | not-accessible | deprecated | Each entry contains one NetworkAddress to `physical' address equivalence. |
| 1.3.6.1.2.1.3.1.1.1 | ColumnatIfIndex | read-write | deprecated | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.2.1.3.1.1.2 | ColumnatPhysAddress | read-write | deprecated | The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the a… |
| 1.3.6.1.2.1.3.1.1.3 | ColumnatNetAddress | read-write | deprecated | The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address. |
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.4.1 | ScalaripForwarding | read-write | mandatory | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.2.1.4.2 | ScalaripDefaultTTL | read-write | mandatory | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra… |
| 1.3.6.1.2.1.4.3 | ScalaripInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.2.1.4.4 | ScalaripInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.2.1.4.5 | ScalaripInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.2.1.4.6 | ScalaripForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.2.1.4.7 | ScalaripInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.4.8 | ScalaripInDiscards | read-only | mandatory | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.2.1.4.9 | ScalaripInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.2.1.4.10 | ScalaripOutRequests | read-only | mandatory | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.2.1.4.11 | ScalaripOutDiscards | read-only | mandatory | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.2.1.4.12 | ScalaripOutNoRoutes | read-only | mandatory | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.2.1.4.13 | ScalaripReasmTimeout | read-only | mandatory | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.2.1.4.14 | ScalaripReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.2.1.4.15 | ScalaripReasmOKs | read-only | mandatory | The number of IP datagrams successfully re- assembled. |
| 1.3.6.1.2.1.4.16 | ScalaripReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.2.1.4.17 | ScalaripFragOKs | read-only | mandatory | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.2.1.4.18 | ScalaripFragFails | read-only | mandatory | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.2.1.4.19 | ScalaripFragCreates | read-only | mandatory | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.2.1.4.20 | TableipAddrTable | not-accessible | mandatory | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1 | RowipAddrEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.2.1.4.20.1.1 | ColumnipAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.2.1.4.20.1.2 | ColumnipAdEntIfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.2.1.4.20.1.3 | ColumnipAdEntNetMask | read-only | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.2.1.4.20.1.4 | ColumnipAdEntBcastAddr | read-only | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.2.1.4.20.1.5 | ColumnipAdEntReasmMaxSize | read-only | mandatory | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.2.1.4.21 | TableipRouteTable | not-accessible | mandatory | This entity's IP Routing table. |
| 1.3.6.1.2.1.4.21.1 | RowipRouteEntry | not-accessible | mandatory | A route to a particular destination. |
| 1.3.6.1.2.1.4.21.1.1 | ColumnipRouteDest | read-write | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.2.1.4.21.1.2 | ColumnipRouteIfIndex | read-write | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.2.1.4.21.1.3 | ColumnipRouteMetric1 | read-write | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.2.1.4.21.1.4 | ColumnipRouteMetric2 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.5 | ColumnipRouteMetric3 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.6 | ColumnipRouteMetric4 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.7 | ColumnipRouteNextHop | read-write | mandatory | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.2.1.4.21.1.8 | ColumnipRouteType | read-write | mandatory | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.2.1.4.21.1.9 | ColumnipRouteProto | read-only | mandatory | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.2.1.4.21.1.10 | ColumnipRouteAge | read-write | mandatory | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.2.1.4.21.1.11 | ColumnipRouteMask | read-write | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.2.1.4.21.1.12 | ColumnipRouteMetric5 | read-write | mandatory | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.2.1.4.21.1.13 | ColumnipRouteInfo | read-only | mandatory | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.2.1.4.22 | TableipNetToMediaTable | not-accessible | mandatory | The IP Address Translation table used for mapping from IP addresses to physical addresses. |
| 1.3.6.1.2.1.4.22.1 | RowipNetToMediaEntry | not-accessible | mandatory | Each entry contains one IpAddress to `physical' address equivalence. |
| 1.3.6.1.2.1.4.22.1.1 | ColumnipNetToMediaIfIndex | read-write | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.2.1.4.22.1.2 | ColumnipNetToMediaPhysAddress | read-write | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.3 | ColumnipNetToMediaNetAddress | read-write | mandatory | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.4 | ColumnipNetToMediaType | read-write | mandatory | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.2.1.4.23 | ScalaripRoutingDiscards | read-only | mandatory | The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-u… |
| 1.3.6.1.2.1.5 | Nodeicmp | |||
| 1.3.6.1.2.1.5.1 | ScalaricmpInMsgs | read-only | mandatory | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. |
| 1.3.6.1.2.1.5.2 | ScalaricmpInErrors | read-only | mandatory | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.2.1.5.3 | ScalaricmpInDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.2.1.5.4 | ScalaricmpInTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.2.1.5.5 | ScalaricmpInParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.2.1.5.6 | ScalaricmpInSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages received. |
| 1.3.6.1.2.1.5.7 | ScalaricmpInRedirects | read-only | mandatory | The number of ICMP Redirect messages received. |
| 1.3.6.1.2.1.5.8 | ScalaricmpInEchos | read-only | mandatory | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.2.1.5.9 | ScalaricmpInEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.2.1.5.10 | ScalaricmpInTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages received. |
| 1.3.6.1.2.1.5.11 | ScalaricmpInTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages received. |
| 1.3.6.1.2.1.5.12 | ScalaricmpInAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages received. |
| 1.3.6.1.2.1.5.13 | ScalaricmpInAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages received. |
| 1.3.6.1.2.1.5.14 | ScalaricmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.2.1.5.15 | ScalaricmpOutErrors | read-only | mandatory | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.2.1.5.16 | ScalaricmpOutDestUnreachs | read-only | mandatory | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.2.1.5.17 | ScalaricmpOutTimeExcds | read-only | mandatory | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.2.1.5.18 | ScalaricmpOutParmProbs | read-only | mandatory | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.2.1.5.19 | ScalaricmpOutSrcQuenchs | read-only | mandatory | The number of ICMP Source Quench messages sent. |
| 1.3.6.1.2.1.5.20 | ScalaricmpOutRedirects | read-only | mandatory | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.2.1.5.21 | ScalaricmpOutEchos | read-only | mandatory | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.2.1.5.22 | ScalaricmpOutEchoReps | read-only | mandatory | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.2.1.5.23 | ScalaricmpOutTimestamps | read-only | mandatory | The number of ICMP Timestamp (request) messages sent. |
| 1.3.6.1.2.1.5.24 | ScalaricmpOutTimestampReps | read-only | mandatory | The number of ICMP Timestamp Reply messages sent. |
| 1.3.6.1.2.1.5.25 | ScalaricmpOutAddrMasks | read-only | mandatory | The number of ICMP Address Mask Request messages sent. |
| 1.3.6.1.2.1.5.26 | ScalaricmpOutAddrMaskReps | read-only | mandatory | The number of ICMP Address Mask Reply messages sent. |
| 1.3.6.1.2.1.6 | Nodetcp | |||
| 1.3.6.1.2.1.6.1 | ScalartcpRtoAlgorithm | read-only | mandatory | The algorithm used to determine the timeout value used for retransmitting unacknowledged octets. |
| 1.3.6.1.2.1.6.2 | ScalartcpRtoMin | read-only | mandatory | The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.2.1.6.3 | ScalartcpRtoMax | read-only | mandatory | The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type d… |
| 1.3.6.1.2.1.6.4 | ScalartcpMaxConn | read-only | mandatory | The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should con… |
| 1.3.6.1.2.1.6.5 | ScalartcpActiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. |
| 1.3.6.1.2.1.6.6 | ScalartcpPassiveOpens | read-only | mandatory | The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. |
| 1.3.6.1.2.1.6.7 | ScalartcpAttemptFails | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of … |
| 1.3.6.1.2.1.6.8 | ScalartcpEstabResets | read-only | mandatory | The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. |
| 1.3.6.1.2.1.6.9 | ScalartcpCurrEstab | read-only | mandatory | The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT. |
| 1.3.6.1.2.1.6.10 | ScalartcpInSegs | read-only | mandatory | The total number of segments received, including those received in error. This count includes segments received on currently established connections. |
| 1.3.6.1.2.1.6.11 | ScalartcpOutSegs | read-only | mandatory | The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. |
| 1.3.6.1.2.1.6.12 | ScalartcpRetransSegs | read-only | mandatory | The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets. |
| 1.3.6.1.2.1.6.13 | TabletcpConnTable | not-accessible | mandatory | A table containing TCP connection-specific information. |
| 1.3.6.1.2.1.6.13.1 | RowtcpConnEntry | not-accessible | mandatory | Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection make… |
| 1.3.6.1.2.1.6.13.1.1 | ColumntcpConnState | read-write | mandatory | The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to retu… |
| 1.3.6.1.2.1.6.13.1.2 | ColumntcpConnLocalAddress | read-only | mandatory | The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface assoc… |
| 1.3.6.1.2.1.6.13.1.3 | ColumntcpConnLocalPort | read-only | mandatory | The local port number for this TCP connection. |
| 1.3.6.1.2.1.6.13.1.4 | ColumntcpConnRemAddress | read-only | mandatory | The remote IP address for this TCP connection. |
| 1.3.6.1.2.1.6.13.1.5 | ColumntcpConnRemPort | read-only | mandatory | The remote port number for this TCP connection. |
| 1.3.6.1.2.1.6.14 | ScalartcpInErrs | read-only | mandatory | The total number of segments received in error (e.g., bad TCP checksums). |
| 1.3.6.1.2.1.6.15 | ScalartcpOutRsts | read-only | mandatory | The number of TCP segments sent containing the RST flag. |
| 1.3.6.1.2.1.7 | Nodeudp | |||
| 1.3.6.1.2.1.7.1 | ScalarudpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.2.1.7.2 | ScalarudpNoPorts | read-only | mandatory | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.2.1.7.3 | ScalarudpInErrors | read-only | mandatory | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.2.1.7.4 | ScalarudpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.2.1.7.5 | TableudpTable | not-accessible | mandatory | A table containing UDP listener information. |
| 1.3.6.1.2.1.7.5.1 | RowudpEntry | not-accessible | mandatory | Information about a particular current UDP listener. |
| 1.3.6.1.2.1.7.5.1.1 | ColumnudpLocalAddress | read-only | mandatory | The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, t… |
| 1.3.6.1.2.1.7.5.1.2 | ColumnudpLocalPort | read-only | mandatory | The local port number for this UDP listener. |
| 1.3.6.1.2.1.8 | Nodeegp | |||
| 1.3.6.1.2.1.10 | Nodetransmission | |||
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.11.1 | ScalarsnmpInPkts | read-only | mandatory | The total number of Messages delivered to the SNMP entity from the transport service. |
| 1.3.6.1.2.1.11.2 | ScalarsnmpOutPkts | read-only | mandatory | The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service. |
| 1.3.6.1.2.1.11.3 | ScalarsnmpInBadVersions | read-only | mandatory | The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version. |
| 1.3.6.1.2.1.11.4 | ScalarsnmpInBadCommunityNames | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity. |
| 1.3.6.1.2.1.11.5 | ScalarsnmpInBadCommunityUses | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named i… |
| 1.3.6.1.2.1.11.6 | ScalarsnmpInASNParseErrs | read-only | mandatory | The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages. |
| 1.3.6.1.2.1.11.8 | ScalarsnmpInTooBigs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'. |
| 1.3.6.1.2.1.11.9 | ScalarsnmpInNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'. |
| 1.3.6.1.2.1.11.10 | ScalarsnmpInBadValues | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.11 | ScalarsnmpInReadOnlys | read-only | mandatory | The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be… |
| 1.3.6.1.2.1.11.12 | ScalarsnmpInGenErrs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.13 | ScalarsnmpInTotalReqVars | read-only | mandatory | The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Ne… |
| 1.3.6.1.2.1.11.14 | ScalarsnmpInTotalSetVars | read-only | mandatory | The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. |
| 1.3.6.1.2.1.11.15 | ScalarsnmpInGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.16 | ScalarsnmpInGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.17 | ScalarsnmpInSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.18 | ScalarsnmpInGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.19 | ScalarsnmpInTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.20 | ScalarsnmpOutTooBigs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.' |
| 1.3.6.1.2.1.11.21 | ScalarsnmpOutNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'. |
| 1.3.6.1.2.1.11.22 | ScalarsnmpOutBadValues | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.24 | ScalarsnmpOutGenErrs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.25 | ScalarsnmpOutGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.26 | ScalarsnmpOutGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.27 | ScalarsnmpOutSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.28 | ScalarsnmpOutGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.29 | ScalarsnmpOutTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.30 | ScalarsnmpEnableAuthenTraps | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration informatio… |
| 1.3.6.1.3.19 | Nodechar | |||
| 1.3.6.1.3.19.1 | ScalarcharNumber | read-only | mandatory | The number of entries in charPortTable, regardless of their current state. |
| 1.3.6.1.3.19.2 | TablecharPortTable | not-accessible | mandatory | A list of port entries. The number of entries is given by the value of charNumber. |
| 1.3.6.1.3.19.2.1 | RowcharPortEntry | not-accessible | mandatory | Status and parameter values for a character port. |
| 1.3.6.1.3.19.2.1.1 | ColumncharPortIndex | read-only | mandatory | A unique value for each character port. Its value ranges between 1 and the value of charNumber. By convention and if possible, hardware port numbers come first… |
| 1.3.6.1.3.19.2.1.2 | ColumncharPortName | read-write | mandatory | An administratively assigned name for the port, typically with some local significance. |
| 1.3.6.1.3.19.2.1.3 | ColumncharPortType | read-only | mandatory | The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not. |
| 1.3.6.1.3.19.2.1.5 | ColumncharPortReset | read-write | mandatory | A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessions. In response to a get-reque… |
| 1.3.6.1.3.19.2.1.6 | ColumncharPortAdminStatus | read-write | mandatory | The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form new sessions. 'disabled' indica… |
| 1.3.6.1.3.19.2.1.7 | ColumncharPortOperStatus | read-only | mandatory | The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for adminis… |
| 1.3.6.1.3.19.2.1.8 | ColumncharPortLastChange | read-only | mandatory | The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the l… |
| 1.3.6.1.3.19.2.1.9 | ColumncharPortInFlowType | read-write | mandatory | The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON an… |
| 1.3.6.1.3.19.2.1.10 | ColumncharPortOutFlowType | read-write | mandatory | The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON a… |
| 1.3.6.1.3.19.2.1.11 | ColumncharPortInFlowState | read-only | mandatory | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicate… |
| 1.3.6.1.3.19.2.1.12 | ColumncharPortOutFlowState | read-only | mandatory | The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicat… |
| 1.3.6.1.3.19.2.1.13 | ColumncharPortInCharacters | read-only | mandatory | Total number of characters detected as input from the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintena… |
| 1.3.6.1.3.19.2.1.14 | ColumncharPortOutCharacters | read-only | mandatory | Total number of characters detected as output to the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenan… |
| 1.3.6.1.3.19.2.1.15 | ColumncharPortAdminOrigin | read-write | mandatory | The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establishment. 'none' disallows session… |
| 1.3.6.1.3.19.2.1.16 | ColumncharPortSessionMaximum | read-write | mandatory | The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less than the current number of sessi… |
| 1.3.6.1.3.19.2.1.17 | ColumncharPortSessionNumber | read-only | mandatory | The number of open sessions on the port that are in the connecting, connected, or disconnecting state. |
| 1.3.6.1.3.19.2.1.18 | ColumncharPortSessionIndex | read-only | mandatory | The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the value zero. |
| 1.3.6.1.3.19.3 | TablecharSessTable | not-accessible | mandatory | A list of port session entries. |
| 1.3.6.1.3.19.3.1 | RowcharSessEntry | not-accessible | mandatory | Status and parameter values for a character port session. |
| 1.3.6.1.3.19.3.1.1 | ColumncharSessPortIndex | read-only | mandatory | The value of charPortIndex for the port to which this session belongs. |
| 1.3.6.1.3.19.3.1.2 | ColumncharSessIndex | read-only | mandatory | The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused … |
| 1.3.6.1.3.19.3.1.3 | ColumncharSessKill | read-write | mandatory | A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'exec… |
| 1.3.6.1.3.19.3.1.4 | ColumncharSessState | read-only | mandatory | The current operational state of the session, disregarding flow control. 'connected' indicates that character data could flow on the network side of session. '… |
| 1.3.6.1.3.19.3.1.5 | ColumncharSessProtocol | read-only | mandatory | The network protocol over which the session is running. Other OBJECT IDENTIFIER values may be defined elsewhere, in association with specific protocols. Howeve… |
| 1.3.6.1.3.19.3.1.6 | ColumncharSessOperOrigin | read-only | mandatory | The session's source of establishment. |
| 1.3.6.1.3.19.3.1.7 | ColumncharSessInCharacters | read-only | mandatory | This session's subset of charPortInCharacters. |
| 1.3.6.1.3.19.3.1.8 | ColumncharSessOutCharacters | read-only | mandatory | This session's subset of charPortOutCharacters. |
| 1.3.6.1.3.19.3.1.10 | ColumncharSessStartTime | read-only | mandatory | The value of sysUpTime [3] when the session entered connecting state. |
| 1.3.6.1.3.19.4 | NodewellKnownProtocols | |||
| 1.3.6.1.3.19.4.1 | NodeprotocolOther | |||
| 1.3.6.1.3.19.4.2 | NodeprotocolTelnet | |||
| 1.3.6.1.3.19.4.3 | NodeprotocolRlogin | |||
| 1.3.6.1.3.19.4.4 | NodeprotocolLat | |||
| 1.3.6.1.3.19.4.5 | NodeprotocolX29 | |||
| 1.3.6.1.3.19.4.6 | NodeprotocolVtp | |||
| 1.3.6.1.3.20 | Noders232 | |||
| 1.3.6.1.3.20.1 | Scalarrs232Number | read-only | mandatory | The number of ports (regardless of their current state) in the RS-232-like general port table. |
| 1.3.6.1.3.20.2 | Tablers232PortTable | not-accessible | mandatory | A list of port entries. The number of entries is given by the value of rs232Number. |
| 1.3.6.1.3.20.2.1 | Rowrs232PortEntry | not-accessible | mandatory | Status and parameter values for a port. |
| 1.3.6.1.3.20.2.1.1 | Columnrs232PortIndex | read-only | mandatory | A unique value for each port. Its value ranges between 1 and the value of rs232Number. By convention and if possible, hardware port numbers map directly to ext… |
| 1.3.6.1.3.20.2.1.2 | Columnrs232PortType | read-only | mandatory | The port's hardware type. |
| 1.3.6.1.3.20.2.1.3 | Columnrs232PortInSigNumber | read-only | mandatory | The number of input signals for the port in the input signal table (rs232PortInSigTable). The table contains entries only for those signals the software can de… |
| 1.3.6.1.3.20.2.1.4 | Columnrs232PortOutSigNumber | read-only | mandatory | The number of output signals for the port in the output signal table (rs232PortOutSigTable). The table contains entries only for those signals the software can… |
| 1.3.6.1.3.20.2.1.5 | Columnrs232PortInSpeed | read-write | mandatory | The port's input speed in bits per second. |
| 1.3.6.1.3.20.2.1.6 | Columnrs232PortOutSpeed | read-write | mandatory | The port's output speed in bits per second. |
| 1.3.6.1.3.20.3 | Tablers232AsyncPortTable | not-accessible | mandatory | A list of asynchronous port entries. The maximum entry number is given by the value of rs232Number. Entries need not exist for synchronous ports. |
| 1.3.6.1.3.20.3.1 | Rowrs232AsyncPortEntry | not-accessible | mandatory | Status and parameter values for an asynchronous port. |
| 1.3.6.1.3.20.3.1.1 | Columnrs232AsyncPortIndex | read-only | mandatory | A unique value for each port. Its value is the same as rs232PortIndex for the port. |
| 1.3.6.1.3.20.3.1.2 | Columnrs232AsyncPortBits | read-write | mandatory | The port's number of bits in a character. |
| 1.3.6.1.3.20.3.1.3 | Columnrs232AsyncPortStopBits | read-write | mandatory | The port's number of stop bits. |
| 1.3.6.1.3.20.3.1.4 | Columnrs232AsyncPortParity | read-write | mandatory | The port's sense of a character parity bit. |
| 1.3.6.1.3.20.3.1.5 | Columnrs232AsyncPortAutobaud | read-write | mandatory | A control for the port's ability to automatically sense input speed. When rs232PortAutoBaud is 'enabled', a port may autobaud to values different from the set … |
| 1.3.6.1.3.20.3.1.6 | Columnrs232AsyncPortParityErrs | read-only | mandatory | Total number of characters with a parity error, input from the port since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.3.1.7 | Columnrs232AsyncPortFramingErrs | read-only | mandatory | Total number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.3.1.8 | Columnrs232AsyncPortOverrunErrs | read-only | mandatory | Total number of characters with an overrun error, input from the port since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.4 | Tablers232SyncPortTable | not-accessible | mandatory | A list of synchronous port entries. The maximum entry number is given by the value of rs232Number. Entries need not exist for asynchronous ports. |
| 1.3.6.1.3.20.4.1 | Rowrs232SyncPortEntry | not-accessible | mandatory | Status and parameter values for a synchronous port. |
| 1.3.6.1.3.20.4.1.1 | Columnrs232SyncPortIndex | read-only | mandatory | A unique value for each port. Its value is the same as rs232PortIndex for the port. |
| 1.3.6.1.3.20.4.1.2 | Columnrs232SyncPortClockSource | read-write | mandatory | Source of the port's bit rate clock. 'split' means the tranmit clock is internal and the receive clock is external. |
| 1.3.6.1.3.20.4.1.3 | Columnrs232SyncPortFrameCheckErrs | read-only | mandatory | Total number of frames with an invalid frame check sequence, input from the port since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.4.1.4 | Columnrs232SyncPortTransmitUnderrunErrs | read-only | mandatory | Total number of frames that failed to be transmitted on the port since system re-initialization and while the port state was 'up' or 'test' because data was no… |
| 1.3.6.1.3.20.4.1.5 | Columnrs232SyncPortReceiveOverrunErrs | read-only | mandatory | Total number of frames that failed to be received on the port since system re-initialization and while the port state was 'up' or 'test' because the receiver d… |
| 1.3.6.1.3.20.4.1.6 | Columnrs232SyncPortInterruptedFrames | read-only | mandatory | Total number of frames that failed to be received or transmitted on the port due to loss of modem signals since system re-initialization and while the port sta… |
| 1.3.6.1.3.20.4.1.7 | Columnrs232SyncPortAbortedFrames | read-only | mandatory | Number of frames aborted on the port due to receiving an abort sequence since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.5 | Tablers232InSigTable | not-accessible | mandatory | A list of port input control signal entries. |
| 1.3.6.1.3.20.5.1 | Rowrs232InSigEntry | not-accessible | mandatory | Input control signal status for a hardware port. |
| 1.3.6.1.3.20.5.1.1 | Columnrs232InSigPortIndex | read-only | mandatory | The value of rs232PortIndex for the port to which this entry belongs. |
| 1.3.6.1.3.20.5.1.2 | Columnrs232InSigName | read-only | mandatory | Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Receive… |
| 1.3.6.1.3.20.5.1.3 | Columnrs232InSigState | read-only | mandatory | The current signal state. |
| 1.3.6.1.3.20.5.1.4 | Columnrs232InSigChanges | read-only | mandatory | The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'. |
| 1.3.6.1.3.20.6 | Tablers232OutSigTable | not-accessible | mandatory | A list of port output control signal entries. |
| 1.3.6.1.3.20.6.1 | Rowrs232OutSigEntry | not-accessible | mandatory | Output control signal status for a hardware port. |
| 1.3.6.1.3.20.6.1.1 | Columnrs232OutSigPortIndex | read-only | mandatory | The value of rs232PortIndex for the port to which this entry belongs. |
| 1.3.6.1.3.20.6.1.2 | Columnrs232OutSigName | read-only | mandatory | Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Receive… |
| 1.3.6.1.3.20.6.1.3 | Columnrs232OutSigState | read-only | mandatory | The current signal state. |
| 1.3.6.1.3.20.6.1.4 | Columnrs232OutSigChanges | read-only | mandatory | The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'. |
| 1.3.6.1.4.1.33 | Nodexyplex | |||
| 1.3.6.1.4.1.33.1 | NodexSystem | |||
| 1.3.6.1.4.1.33.1.1 | NoderesourceLack | Indication that the system incremented the corresponding value of resLacks. | ||
| 1.3.6.1.4.1.33.1.1 | ScalarsysIdent | read-write | mandatory | An identification string for local and remote displays. Corresponds directly to SERVER IDENTIFICATION and the value labeled 'Identification:' on the SERVER CHA… |
| 1.3.6.1.4.1.33.1.2 | ScalarsysDefineMode | read-write | mandatory | The system's operation with regard to DEFINE commands. 'permOnly' indicates that DEFINE commands modify only the permanent data base. 'operAndPerm' indicates t… |
| 1.3.6.1.4.1.33.1.3 | ScalarsysDateTime | read-write | mandatory | The system's current local date and time. Corresponds directly to SERVER DATE and SERVER TIME and the value in various displays. |
| 1.3.6.1.4.1.33.1.4 | ScalarsysTimeZone | read-write | mandatory | The adjustment to apply to a universal (Greenwich) time received when down-line loaded, comprising two octets. The first octet is the number of hours west of u… |
| 1.3.6.1.4.1.33.1.5 | ScalarsysLoadSoftware | read-write | mandatory | The software file name to request for down-line load of the server. Corresponds directly to SERVER SOFTWARE, and the value labeled 'Software:' in the SERVER CH… |
| 1.3.6.1.4.1.33.1.6 | ScalarsysDump | read-write | mandatory | Control for dumping the system's memory when the system crashes. Corresponds directly to SERVER DUMP and the presence of 'Dump' under the label 'Enabled Charac… |
| 1.3.6.1.4.1.33.1.7 | ScalarsysMaintenancePassword | read-write | mandatory | The password a management system must supply to force the system to reboot or use the system's remote console via the Maintenance Operation Protocol (MOP). Cor… |
| 1.3.6.1.4.1.33.1.8 | ScalarsysLocalName | read-write | mandatory | The system's local name. Corresponds directly to SERVER NAME and the value labeled 'Name:' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.9 | ScalarsysSoftwareVersionType | read-only | mandatory | The software version variant running in the system. Corresponds to the letter in the software version in the SERVER CHARACTERISTICS display. alpha 'A': alpha t… |
| 1.3.6.1.4.1.33.1.10 | ScalarsysSoftwareVersion | read-only | mandatory | The software version running in the system. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers … |
| 1.3.6.1.4.1.33.1.11 | ScalarsysRomVersion | read-only | mandatory | The firmware version of the bootstrap ROM installed in the system. Corresponds directly to the value labeled 'Rom' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.12 | ScalarsysHardwareType | read-only | mandatory | The type of hardware on which the system is running, with values as defined in Xyplex Assigned Numbers, Xyplex document number 420-0497. Corresponds directly t… |
| 1.3.6.1.4.1.33.1.13 | ScalarsysHardwareVersion | read-only | mandatory | This version of hardware on which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.14 | ScalarsysChassisType | read-only | mandatory | The type of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.15 | ScalarsysChassisVersion | read-only | mandatory | This version of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.1.16 | ScalarsysCrash | read-write | mandatory | Control to cause this system to crash. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to … |
| 1.3.6.1.4.1.33.1.17 | ScalarsysInitialize | read-write | mandatory | Control to cause this system to reset its software to initial load values, typically by reloading. When executing an initialize command, the system observes th… |
| 1.3.6.1.4.1.33.1.18 | ScalarsysInitializeDelay | read-write | mandatory | The number of minutes to delay before beginning the system initialization process as executed with sysInitialize. This value cannot be set outside a set-reques… |
| 1.3.6.1.4.1.33.1.19 | ScalarsysZeroAll | read-write | mandatory | Control to zero all counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' h… |
| 1.3.6.1.4.1.33.1.20 | ScalarsysZeroBase | read-write | mandatory | Control to zero all base counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'rea… |
| 1.3.6.1.4.1.33.1.21 | ScalarsysZeroBaseTime | read-only | mandatory | The number hundredths of a second since the most recent zeroing of the base counters, such as through execution of sysZeroAll or sysZeroBase. Corresponds direc… |
| 1.3.6.1.4.1.33.1.22 | ScalarsysLoaderName | read-only | mandatory | The name of the system that provided this system's running software. Corresponds directly to the value labeled 'Primary Host:' in the SERVER STATUS display. |
| 1.3.6.1.4.1.33.1.23 | ScalarsysLoaderAddressType | read-only | mandatory | The type of network address contained in sysLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' mean… |
| 1.3.6.1.4.1.33.1.24 | ScalarsysLoaderAddress | read-only | mandatory | The network address of the system that provided this system's running software. Corresponds directly to the value labeled 'Load Address:' in the SERVER STATUS … |
| 1.3.6.1.4.1.33.1.25 | ScalarsysDumperAddressType | read-only | mandatory | The type of network address contained in sysDumperAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' mean… |
| 1.3.6.1.4.1.33.1.26 | ScalarsysDumperAddress | read-only | mandatory | The network address of the system that most recently accepted a crash dump from this system. Corresponds directly to the value labeled 'Dump Address:' in the S… |
| 1.3.6.1.4.1.33.1.27 | ScalarsysResourceLacks | read-only | mandatory | The number of times a local resource allocation failed, for example due to lack of dynamic memory. Corresponds directly to the value labeled 'Resource Errors:'… |
| 1.3.6.1.4.1.33.1.28 | ScalarsysChassisState | read-only | mandatory | For chassis-based systems, the state of the overall chassis. 'notApplicable' indicates the system is not chassis based. 'noFault' indicates no current chassis … |
| 1.3.6.1.4.1.33.1.29 | ScalarsysChassisFaultTransitions | read-only | mandatory | The number of times this system has seen sysChassisState switch from 'noFault' to 'fault' or from 'fault' to 'noFault'. Corresponds directly to the value label… |
| 1.3.6.1.4.1.33.1.30 | ScalarsysResourceNumber | read-only | mandatory | The number of resource entries in the Resource table. |
| 1.3.6.1.4.1.33.1.31 | ScalarsysFeatureNumber | read-only | mandatory | The number of feature entries in the Feature table. |
| 1.3.6.1.4.1.33.1.32 | TableresTable | not-accessible | mandatory | A list of resource entries. The number of entries is given by the value of sysResourceNumber. |
| 1.3.6.1.4.1.33.1.32.1 | RowresEntry | not-accessible | mandatory | Status values for a system resource. |
| 1.3.6.1.4.1.33.1.32.1.1 | ColumnresType | read-only | mandatory | Identification of a resource type. Typically corresponds directly to a label such as 'Processes:' in the SERVER ALTERNATE STATUS display. |
| 1.3.6.1.4.1.33.1.32.1.2 | ColumnresCurrent | read-only | mandatory | The number of resources currently in use on the system. Typically corresponds directly to a value labeled 'Cur' in the SERVER ALTERNATE STATUS display. |
| 1.3.6.1.4.1.33.1.32.1.3 | ColumnresWorst | read-only | mandatory | The highest or lowest value of resCurrent since system initialization. Typically corresponds directly to a value labeled 'High' or 'Low' in the SERVER ALTERNAT… |
| 1.3.6.1.4.1.33.1.32.1.4 | ColumnresAdminMaximum | read-write | mandatory | The desired maximum possible number of resources in the system. In many cases, ACCESS to this object for a particular resType is read-only. Typically correspon… |
| 1.3.6.1.4.1.33.1.32.1.5 | ColumnresLacks | read-only | mandatory | The number of times since system initialization that the system could not obtain the resource because none were available. Typically corresponds directly to a … |
| 1.3.6.1.4.1.33.1.32.1.6 | ColumnresLackTime | read-only | mandatory | The local system date and time when resLack last increased. Typically corresponds directly to a value labeled 'Last Occurred' in the SERVER ALTERNATE STATUS di… |
| 1.3.6.1.4.1.33.1.32.1.7 | ColumnresOperMaximum | read-only | mandatory | The current maximum possible number of resources in the system. Typically corresponds directly to a value labeled 'Max' in the SERVER ALTERNATE STATUS display … |
| 1.3.6.1.4.1.33.1.33 | TablefeatTable | not-accessible | mandatory | A list of feature entries. The number of entries is given by the value of sysFeatureNumber. |
| 1.3.6.1.4.1.33.1.33.1 | RowfeatEntry | not-accessible | mandatory | Status values for a system feature. |
| 1.3.6.1.4.1.33.1.33.1.1 | ColumnfeatType | read-only | mandatory | Identification of a feature type. Corresponds to a SERVER feature keyword. |
| 1.3.6.1.4.1.33.1.33.1.2 | ColumnfeatStatus | read-write | mandatory | The status of the feature as of the next system initialization. Corresponds to the presence of the feature's lable following the label 'Enabled Feature(s): in … |
| 1.3.6.1.4.1.33.1.34 | NodebootControl | |||
| 1.3.6.1.4.1.33.1.34.1 | ScalarbootControlLoadInternetFile | read-write | mandatory | The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled 'Internet Load File:' in the SE… |
| 1.3.6.1.4.1.33.1.34.2 | ScalarbootControlLoadInternetServer | read-write | mandatory | The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled 'Internet Loa… |
| 1.3.6.1.4.1.33.1.34.3 | ScalarbootControlLoadInternetGateway | read-write | mandatory | The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled 'Internet… |
| 1.3.6.1.4.1.33.1.34.4 | ScalarbootControlLoadBootpTftp | read-write | mandatory | Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP/' following the label … |
| 1.3.6.1.4.1.33.1.34.5 | ScalarbootControlLoadTftpDirect | read-write | mandatory | Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of 'TFTPDIRECT' following the label 'Load Protocols Enab… |
| 1.3.6.1.4.1.33.1.34.6 | ScalarbootControlLoadLocal | read-write | mandatory | Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Load Protocols Enabled:' in… |
| 1.3.6.1.4.1.33.1.34.7 | ScalarbootControlLoadMop | read-write | mandatory | Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of 'MOP' following the label 'Load Protocols Enabled:' in the SERVER … |
| 1.3.6.1.4.1.33.1.34.8 | ScalarbootControlLoadProprietary | read-write | mandatory | Control for loading via Xyplex-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label … |
| 1.3.6.1.4.1.33.1.34.9 | ScalarbootControlLoadRarpTftp | read-write | mandatory | Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Loa… |
| 1.3.6.1.4.1.33.1.34.10 | ScalarbootControlDumpBootpTftp | read-write | mandatory | Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP' following the label '… |
| 1.3.6.1.4.1.33.1.34.11 | ScalarbootControlDumpLocal | read-write | mandatory | Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of 'Local' following the label 'Dump Protocols Enabled:' in t… |
| 1.3.6.1.4.1.33.1.34.12 | ScalarbootControlDumpMop | read-write | mandatory | Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of 'MOP' following the label 'Dump Protocols Enabled:' in the SERVER … |
| 1.3.6.1.4.1.33.1.34.13 | ScalarbootControlDumpProprietary | read-write | mandatory | Control for dumping via Xyplex-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label … |
| 1.3.6.1.4.1.33.1.34.14 | ScalarbootControlDumpRarpTftp | read-write | mandatory | Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Dum… |
| 1.3.6.1.4.1.33.1.34.15 | ScalarbootControlParamBootpTftp | read-write | mandatory | Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'BOOTP/TFTP' following t… |
| 1.3.6.1.4.1.33.1.34.16 | ScalarbootControlParamLocal | read-write | mandatory | Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Parameter P… |
| 1.3.6.1.4.1.33.1.34.17 | ScalarbootControlParamMop | read-write | mandatory | Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'MOP' following the label 'Parameter Protocols Ena… |
| 1.3.6.1.4.1.33.1.34.18 | ScalarbootControlParamProprietary | read-write | mandatory | Control for loading parameters via Xyplex-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of 'Proprietary' foll… |
| 1.3.6.1.4.1.33.1.34.19 | ScalarbootControlParamRarpTftp | read-write | mandatory | Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' followin… |
| 1.3.6.1.4.1.33.1.35 | ScalarsysInstalledMemory | read-only | mandatory | The total number of bytes of main memory installed in the system. Corresponds directly to the value labeled 'Installed' on the SERVER ALTERNATE STATUS display. |
| 1.3.6.1.4.1.33.2 | NodecharacterDep | |||
| 1.3.6.1.4.1.33.3 | Nodelat | |||
| 1.3.6.1.4.1.33.3.1 | ScalarlatAnnounceServices | read-write | mandatory | Control for automatic, periodic announcement of local services to the network. Corresponds directly to SERVER ANNOUNCEMENTS and the presence of the label 'Anno… |
| 1.3.6.1.4.1.33.3.2 | ScalarlatCircuitTimer | read-write | mandatory | Number of milleseconds to collect port input data before sending it to the host. Corresponds directly to SERVER CIRCUIT TIMER and the value labeled 'Circuit Ti… |
| 1.3.6.1.4.1.33.3.3 | ScalarlatIdentificationLengthLimit | read-write | mandatory | Maximum number of characters to store in the instances of latVisibleServiceIdentification. Corresponds directly to SERVER IDENTIFICATION SIZE and the value lab… |
| 1.3.6.1.4.1.33.3.4 | ScalarlatKeepaliveTimer | read-write | mandatory | Number of seconds of inactivity before sending a null message to the host. Corresponds directly to SERVER KEEPALIVE TIMER and the value labeled 'Keepalive Time… |
| 1.3.6.1.4.1.33.3.5 | ScalarlatMulticastTimer | read-write | mandatory | Number of seconds between transmission of local service announcements. Corresponds directly to SERVER MULTICAST TIMER and the value labeled 'Multicast Timer:' … |
| 1.3.6.1.4.1.33.3.6 | ScalarlatNodeLimit | read-write | mandatory | Maximum number of service nodes to keep in the node table. Corresponds directly to SERVER NODE LIMIT and the value labeled 'Node Limit:' in the SERVER CHARACTE… |
| 1.3.6.1.4.1.33.3.7 | ScalarlatNumber | read-write | mandatory | An arbitrary number assigned and used for administrative purposes. Corresponds directly to SERVER NUMBER and the value labeled 'Number:' in the SERVER CHARACTE… |
| 1.3.6.1.4.1.33.3.8 | ScalarlatRetransmitLimit | read-write | mandatory | Maximum number of times to retransmit an unacknowledged message. Corresponds directly to SERVER RETRANSMIT LIMIT and the value labeled 'Retransmit Limit:' in t… |
| 1.3.6.1.4.1.33.3.9 | ScalarlatLocalServiceGroups | read-write | mandatory | The list of group numbers allowed to use local services, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each … |
| 1.3.6.1.4.1.33.3.10 | ScalarlatGroupPurge | read-write | mandatory | Control for automatic deletion of all node table entries when latServiceGroups or latPortCurrentGroups is changed. Corresponds directly to SERVER PURGE GROUP a… |
| 1.3.6.1.4.1.33.3.11 | ScalarlatNodePurge | read-write | mandatory | Control for automatic deletion of all node table entries with status 'reachable' when the number of entries exceeds latNodeLimit. Corresponds directly to SERVE… |
| 1.3.6.1.4.1.33.3.12 | ScalarlatNodesRejected | read-only | mandatory | Number of nodes not added to the node table because there was no room. Corresponds directly to the value labeled 'Discarded Nodes:' in the SERVER STATUS displa… |
| 1.3.6.1.4.1.33.3.13 | ScalarlatInMessages | read-only | mandatory | Number of LAT messages received. Corresponds directly to the value labeled 'Messages Received:' in the SERVER COUNTERS display. |
| 1.3.6.1.4.1.33.3.14 | ScalarlatOutMessages | read-only | mandatory | Number of LAT messages sent. Corresponds directly to the value labeled 'Messages Transmitted:' in the SERVER COUNTERS display. |
| 1.3.6.1.4.1.33.3.15 | ScalarlatInSessionsAccepted | read-only | mandatory | Number of incoming LAT session connection attempts accepted. Corresponds directly to the value labeled 'Solicitations Accepted:' in the SERVER COUNTERS display. |
| 1.3.6.1.4.1.33.3.16 | ScalarlatInSessionsRejected | read-only | mandatory | Number of incoming LAT session connection attempts rejected. Corresponds directly to the value labeled 'Solicitations Rejected:' in the SERVER COUNTERS display. |
| 1.3.6.1.4.1.33.3.17 | ScalarlatAddressChange | read-only | mandatory | Number of times a service announcement contained a node name already in the visible service table but with a different address. Corresponds directly to the val… |
| 1.3.6.1.4.1.33.3.18 | ScalarlatInDuplicates | read-only | mandatory | Number of duplicate LAT messages received. Corresponds directly to the value labeled 'Duplicates Received:' in the SERVER COUNTERS display. |
| 1.3.6.1.4.1.33.3.19 | ScalarlatOutRetransmits | read-only | mandatory | Number of LAT messages retransmitted due to no acknowledgement. Corresponds directly to the value labeled 'Messages Re-transmitted:' in the SERVER COUNTERS dis… |
| 1.3.6.1.4.1.33.3.20 | ScalarlatInBadMessages | read-only | mandatory | Number of LAT messages received with invalid format. Corresponds directly to the value labeled 'Illegal Messages Rcv'd:' in the SERVER COUNTERS display. |
| 1.3.6.1.4.1.33.3.21 | ScalarlatInBadSlots | read-only | mandatory | Number of LAT messages received with invalid slot format. Corresponds directly to the value labeled 'Illegal Slots Rcv'd:' in the SERVER COUNTERS display. |
| 1.3.6.1.4.1.33.3.22 | ScalarlatInBadMulticasts | read-only | mandatory | Number of multicast LAT messages received with invalid format. Corresponds directly to the value labeled 'Illegal Multicasts Rcv'd:' in the SERVER COUNTERS dis… |
| 1.3.6.1.4.1.33.3.23 | TablelatPortTable | not-accessible | mandatory | A list of LAT character port entries. |
| 1.3.6.1.4.1.33.3.23.1 | RowlatPortEntry | not-accessible | mandatory | LAT parameter values for a port. |
| 1.3.6.1.4.1.33.3.23.1.1 | ColumnlatPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.3.23.1.2 | ColumnlatPortAuthorizedGroups | read-write | mandatory | The list of group numbers to which the port is allowed to set access, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one … |
| 1.3.6.1.4.1.33.3.23.1.3 | ColumnlatPortAutoPrompt | read-write | mandatory | Control for automatic stimulation of a host prompt upon forming a new session. Corresponds directly to PORT AUTOPROMPT and the presence of the label 'Autopromp… |
| 1.3.6.1.4.1.33.3.23.1.4 | ColumnlatPortCurrentGroups | read-write | mandatory | The list of group numbers to which the port currently has set access, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one … |
| 1.3.6.1.4.1.33.3.23.1.5 | ColumnlatPortRemoteModification | read-write | mandatory | Control to allow the remote system to modify certain physical port characteristics. Corresponds directly to PORT REMOTE MODIFICATION and the presence of the la… |
| 1.3.6.1.4.1.33.3.24 | TablelatOfferedServiceTable | not-accessible | mandatory | A list of offered service entries. |
| 1.3.6.1.4.1.33.3.24.1 | RowlatOfferedServiceEntry | not-accessible | mandatory | Parameter values for an offered service entry. |
| 1.3.6.1.4.1.33.3.24.1.1 | ColumnlatOfferedServiceName | read-write | mandatory | The name of an offered service. Corresponds directly to the name in a SERVICE command and the value labeled 'Service:' in the SERVICE CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.3.24.1.2 | ColumnlatOfferedServiceStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR SERVICE command. Actual removal of the entry is implemen… |
| 1.3.6.1.4.1.33.3.24.1.3 | ColumnlatOfferedServiceAllowConnections | read-write | mandatory | Control for allowing incoming connections to the service. Corresponds directly to SERVICE CONNECTIONS and the presence of the label 'Connections' following the… |
| 1.3.6.1.4.1.33.3.24.1.4 | ColumnlatOfferedServiceIdentification | read-write | mandatory | Text to identify a service. Corresponds directly to SERVICE IDENTIFICATION and the value labeled 'Identification:' in the SERVICE CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.3.24.1.5 | ColumnlatOfferedServicePassword | read-write | mandatory | The password a user must supply to use the service. Corresponds directly to SERVICE PASSWORD and the presence of the label 'Password' following the label 'Enab… |
| 1.3.6.1.4.1.33.3.24.1.6 | ColumnlatOfferedServicePortMap | read-write | mandatory | The list of character ports offer the service. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the syste… |
| 1.3.6.1.4.1.33.3.24.1.7 | ColumnlatOfferedServiceQueuing | read-write | mandatory | Control for allowing queuing of incoming connections to the service when the service is busy. Corresponds directly to SERVICE QUEUE and the presence of the lab… |
| 1.3.6.1.4.1.33.3.25 | TablelatVisibleServiceTable | not-accessible | mandatory | A list of visible service entries. |
| 1.3.6.1.4.1.33.3.25.1 | RowlatVisibleServiceEntry | not-accessible | mandatory | Parameter values for a visible service entry. |
| 1.3.6.1.4.1.33.3.25.1.1 | ColumnlatVisibleServiceName | read-only | mandatory | The name of a visible service. Corresponds directly to the name in a SERVICE command and the value labeled 'Service Name' in the SERVICE SUMMARY display. |
| 1.3.6.1.4.1.33.3.25.1.2 | ColumnlatVisibleServiceStatus | read-only | mandatory | Status of communication with the service. Corresponds directly to the value labeled 'Status' in the SERVICE SUMMARY display. |
| 1.3.6.1.4.1.33.3.25.1.3 | ColumnlatVisibleServiceNode | read-only | mandatory | Name of a node offering the service. Corresponds directly to the value labeled Node Name in the SERVICE STATUS display. |
| 1.3.6.1.4.1.33.3.25.1.4 | ColumnlatVisibleServiceConnectedSessions | read-only | mandatory | Number of connected sessions to the service. Corresponds directly to the number with the value 'Connected', labeled 'Status' in the SERVICE SUMMARY display. |
| 1.3.6.1.4.1.33.3.25.1.5 | ColumnlatVisibleServiceIdentification | read-only | mandatory | Text to identify a service. The length is subject to limitation by latIdentificationLengthLimit. Corresponds directly to the value labeled 'Identification:' in… |
| 1.3.6.1.4.1.33.3.25.1.6 | ColumnlatVisibleServiceRating | read-only | mandatory | Relative capacity of the service to accept additional sessions. Corresponds directly to value labeled Rating in the SERVICE STATUS display. |
| 1.3.6.1.4.1.33.3.26 | TablelatNodeTable | not-accessible | mandatory | A list of node entries. |
| 1.3.6.1.4.1.33.3.26.1 | RowlatNodeEntry | not-accessible | mandatory | Parameter values for a node entry. |
| 1.3.6.1.4.1.33.3.26.1.1 | ColumnlatNodeName | read-only | mandatory | The name of a node. Corresponds directly to the value labeled 'Node:' in the NODE STATUS display. |
| 1.3.6.1.4.1.33.3.26.1.2 | ColumnlatNodeStatus | read-only | mandatory | Status of communication with the node. Corresponds directly to the value labeled 'Status' in the NODE STATUS display. |
| 1.3.6.1.4.1.33.3.26.1.3 | ColumnlatNodeConnectedSessions | read-only | mandatory | Number of connected sessions to the node. Corresponds directly to the number with the value 'Connected', labeled 'Status' in the NODE STATUS display. |
| 1.3.6.1.4.1.33.3.26.1.4 | ColumnlatNodeAddress | read-only | mandatory | Ethernet address of the node. Corresponds directly to the value labeled 'Address:' in the NODE STATUS display. |
| 1.3.6.1.4.1.33.3.26.1.5 | ColumnlatNodeDataLinkFrame | read-only | mandatory | Maximum Ethernet frame used by the node. Corresponds directly to the value labeled 'Data Link Frame Size:' in the NODE STATUS display. |
| 1.3.6.1.4.1.33.3.26.1.6 | ColumnlatNodeIdentification | read-only | mandatory | Text that identifies the node. The size is subject to limitation by latIdentificationLengtLimit. Corresponds directly to the value labeled 'Identification' in … |
| 1.3.6.1.4.1.33.3.26.1.7 | ColumnlatNodeGroups | read-write | mandatory | The list of group numbers to which the node belongs, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each grou… |
| 1.3.6.1.4.1.33.3.26.1.8 | ColumnlatNodeServiceNumber | read-only | mandatory | Number of entries for the node in the node service table. Corresponds indirectly to the list of services in the NODE STATUS display. |
| 1.3.6.1.4.1.33.3.26.1.9 | ColumnlatNodeZero | read-write | mandatory | Control to zero counters kept for the node. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the valu… |
| 1.3.6.1.4.1.33.3.26.1.10 | ColumnlatNodeZeroTime | read-only | mandatory | The number of hundredths of a second since the most recent zeroing of the counters kept for the node, such as through execution of sysZeroAll or latNodeZero. C… |
| 1.3.6.1.4.1.33.3.26.1.11 | ColumnlatNodeInMessages | read-only | mandatory | The number of LAT messages received from the node. Corresponds directly to the value labeled 'Messages Received:' in the NODE COUNTERS display. |
| 1.3.6.1.4.1.33.3.26.1.12 | ColumnlatNodeOutMessages | read-only | mandatory | The number of LAT messages sent to the node. Corresponds directly to the value labeled 'Messages Transmitted:' in the NODE COUNTERS display. |
| 1.3.6.1.4.1.33.3.26.1.13 | ColumnlatNodeInSlots | read-only | mandatory | The number of LAT slots received from the node. Corresponds directly to the value labeled 'Slots Received:' in the NODE COUNTERS display. |
| 1.3.6.1.4.1.33.3.26.1.14 | ColumnlatNodeOutSlots | read-only | mandatory | The number of LAT slots sent to the node. Corresponds directly to the value labeled 'Slots Transmitted:' in the NODE COUNTERS display. |
| 1.3.6.1.4.1.33.3.26.1.15 | ColumnlatNodeInBytes | read-only | mandatory | The total number of bytes received from the node, including Ethernet overhead. Corresponds directly to the value labeled 'Bytes Received:' in the NODE COUNTERS… |
| 1.3.6.1.4.1.33.3.26.1.16 | ColumnlatNodeOutBytes | read-only | mandatory | The total number of bytes sent to the node, including Ethernet overhead. Corresponds directly to the value labeled 'Bytes Transmitted:' in the NODE COUNTERS di… |
| 1.3.6.1.4.1.33.3.26.1.17 | ColumnlatNodeAddressChange | read-only | mandatory | The number of times a LAT message multicast by the node had a different Ethernet address from the previous time. Corresponds directly to the value labeled 'Mul… |
| 1.3.6.1.4.1.33.3.26.1.18 | ColumnlatNodeInDuplicates | read-only | mandatory | The number of duplicate LAT message received from the node. Corresponds directly to the value labeled 'Duplicates Received:' in the NODE COUNTERS display. |
| 1.3.6.1.4.1.33.3.26.1.19 | ColumnlatNodeOutRetransmits | read-only | mandatory | The number of LAT message retransmitted to the node due to lack of acknowledgement. Corresponds directly to the value labeled 'Messages Re-transmitted:' in the… |
| 1.3.6.1.4.1.33.3.26.1.20 | ColumnlatNodeInBadMessages | read-only | mandatory | The number of LAT message received from the node with invalid format. Corresponds directly to the value labeled 'Illegal Messages Received:' in the NODE COUNTE… |
| 1.3.6.1.4.1.33.3.26.1.21 | ColumnlatNodeInBadSlots | read-only | mandatory | The number of LAT slots received from the node with invalid format. Corresponds directly to the value labeled 'Illegal Slots Received:' in the NODE COUNTERS di… |
| 1.3.6.1.4.1.33.3.26.1.22 | ColumnlatNodeInSessionsAccepted | read-only | mandatory | The number of LAT session connection attempts received from the node and accepted. Corresponds directly to the value labeled 'Solicitations Accepted:' in the N… |
| 1.3.6.1.4.1.33.3.26.1.23 | ColumnlatNodeInSessionsRejected | read-only | mandatory | The number of LAT session connection attempts received from the node and rejected. Corresponds directly to the value labeled 'Solicitations Rejected:' in the N… |
| 1.3.6.1.4.1.33.4 | NodexInternetDep | |||
| 1.3.6.1.4.1.33.6 | NodebootServer | |||
| 1.3.6.1.4.1.33.6.1 | NodebsBasic | |||
| 1.3.6.1.4.1.33.6.1.1 | ScalarbasicLogLimit | read-write | mandatory | Maximum allowed number of kilobytes for recording events. Corresponds directly to MANAGER LOG FILE SIZE and the value labeled 'Log File Size:' in the MANAGER C… |
| 1.3.6.1.4.1.33.6.1.2 | ScalarbasicActiveLimit | read-write | mandatory | Maximum allowed number of simultaneous service dialogs. Corresponds directly to MANAGER SIMULTANEOUS and the value labeled 'Maximum simultaneous requests:' in … |
| 1.3.6.1.4.1.33.6.1.3 | ScalarbasicActiveNumber | read-only | mandatory | Number of active service dialogs. Corresponds indirectly to the list of active clients in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.4 | ScalarbasicClientNumber | read-only | mandatory | Number of defined clients. Corresponds indirectly to the list of defined clients in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. |
| 1.3.6.1.4.1.33.6.1.5 | ScalarbasicOffersSent | read-only | mandatory | Total number of service offers sent in response to client requests. Corresponds directly to the value labeled 'Total service offers sent:' in the MANAGER STATU… |
| 1.3.6.1.4.1.33.6.1.6 | ScalarbasicEventTotal | read-only | mandatory | Total number of events that have been written to the event log since it was last purged. This may be less than the number currently in the log. Corresponds dir… |
| 1.3.6.1.4.1.33.6.1.7 | ScalarbasicEventPurge | read-write | mandatory | Control to cause emptying the event log. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value t… |
| 1.3.6.1.4.1.33.6.1.8 | TableactiveTable | not-accessible | mandatory | A list of active client dialog entries. The number of entries is given by basicActiveNumber. |
| 1.3.6.1.4.1.33.6.1.8.1 | RowactiveEntry | not-accessible | mandatory | Parameter values for an active client dialog entry. |
| 1.3.6.1.4.1.33.6.1.8.1.1 | ColumnactiveIdentificationType | read-only | mandatory | The type of identification value in activeIdentification. Corresponds indirectly to the value labeled 'EthernetAddress' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.2 | ColumnactiveIdentification | read-only | mandatory | Identification of the active partner. Corresponds directly to the value labeled 'EthernetAddress' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.3 | ColumnactiveFunction | read-only | mandatory | The function the server is performing with the partner. Corresponds directly to the value labeled 'Function' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.4 | ColumnactiveSoftwareVersionType | read-only | mandatory | If activeFunction is 'load', the software version being sent to the client, otherwise 'notApplicable'. Corresponds to the letter in the software version labele… |
| 1.3.6.1.4.1.33.6.1.8.1.5 | ColumnactiveSoftwareVersion | read-only | mandatory | If activeFunction is 'load', the 4-byte software version being sent to the client, otherwise zero length. In order, the octets contain major version, minor ver… |
| 1.3.6.1.4.1.33.6.1.8.1.6 | ColumnactiveParameterVersion | read-only | mandatory | If activeFunction is 'parameterStore', the parameter version being stored by the client, otherwise zero. Corresponds directly to the value labeled 'Version' in… |
| 1.3.6.1.4.1.33.6.1.8.1.7 | ColumnactiveCurrentSequence | read-only | mandatory | The current dialog sequence number. Corresponds directly to the value labeled 'Seq' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.8 | ColumnactiveBytesRemaining | read-only | mandatory | The number of bytes remaining to be transferred in the dialog. Corresponds directly to the value labeled 'Left' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.9 | ColumnactiveFile | read-only | mandatory | The name of the file being used in the dialog. Corresponds directly to the value labeled 'File' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.10 | ColumnactiveStatus | read-only | mandatory | The final status of the most recent attempt to get an image. Corresponds directly to the value labeled 'Get Status:' in the DEVICE STATUS display. |
| 1.3.6.1.4.1.33.6.1.8.1.11 | ColumnactiveState | read-only | mandatory | The dynamic state of an active attempt to get an image. Corresponds directly to the value labeled 'Get State:' in the DEVICE STATUS display. |
| 1.3.6.1.4.1.33.6.1.9 | TableclientTable | not-accessible | mandatory | A list of client data base entries. The number of entries is given by basicClientNumber. |
| 1.3.6.1.4.1.33.6.1.9.1 | RowclientEntry | not-accessible | mandatory | Parameter values for a client data base entry. |
| 1.3.6.1.4.1.33.6.1.9.1.1 | ColumnclientIdentificationType | read-write | mandatory | The type of identification value in clientIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ether… |
| 1.3.6.1.4.1.33.6.1.9.1.2 | ColumnclientIdentification | read-write | mandatory | Identification of the client, either a hardware type or an Ethernet address, depending on clientIdentificationType. Corresponds directly to MANAGER NODE, MANAG… |
| 1.3.6.1.4.1.33.6.1.9.1.3 | ColumnclientEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual rem… |
| 1.3.6.1.4.1.33.6.1.9.1.4 | ColumnclientName | read-write | mandatory | A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display. |
| 1.3.6.1.4.1.33.6.1.9.1.5 | ColumnclientLoadFile | read-write | mandatory | The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. |
| 1.3.6.1.4.1.33.6.1.9.1.6 | ColumnclientDiagnosticFile | read-write | mandatory | The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE … |
| 1.3.6.1.4.1.33.6.1.9.1.7 | ColumnclientLoadService | read-write | mandatory | Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displ… |
| 1.3.6.1.4.1.33.6.1.9.1.8 | ColumnclientDumpService | read-write | mandatory | Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displ… |
| 1.3.6.1.4.1.33.6.1.10 | TablenamedTable | not-accessible | mandatory | A list of named client data base entries. The number of entries is given by basicClientNumber. |
| 1.3.6.1.4.1.33.6.1.10.1 | RownamedEntry | not-accessible | mandatory | Parameter values for a named client data base entry. |
| 1.3.6.1.4.1.33.6.1.10.1.1 | ColumnnamedIdentificationType | read-write | mandatory | The type of identification value in namedIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethern… |
| 1.3.6.1.4.1.33.6.1.10.1.2 | ColumnnamedIdentification | read-write | mandatory | Identification of the client, either a hardware type or an Ethernet address, depending on namedIdentificationType. Corresponds directly to MANAGER NODE, MANAGE… |
| 1.3.6.1.4.1.33.6.1.10.1.3 | ColumnnamedEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual rem… |
| 1.3.6.1.4.1.33.6.1.10.1.4 | ColumnnamedName | read-write | mandatory | A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display. |
| 1.3.6.1.4.1.33.6.1.10.1.5 | ColumnnamedLoadFile | read-write | mandatory | The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. |
| 1.3.6.1.4.1.33.6.1.10.1.6 | ColumnnamedDiagnosticFile | read-write | mandatory | The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE … |
| 1.3.6.1.4.1.33.6.1.10.1.7 | ColumnnamedLoadService | read-write | mandatory | Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displ… |
| 1.3.6.1.4.1.33.6.1.10.1.8 | ColumnnamedDumpService | read-write | mandatory | Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displ… |
| 1.3.6.1.4.1.33.6.1.11 | TableeventTable | not-accessible | mandatory | A list of event entries. The number of entries is given by basicEventNumber. |
| 1.3.6.1.4.1.33.6.1.11.1 | RoweventEntry | not-accessible | mandatory | Parameter values for a event entry. |
| 1.3.6.1.4.1.33.6.1.11.1.1 | ColumneventIndex | read-only | mandatory | In identification number for an event. The value 1 indicates the oldest event in the file, with subsequent numbers indicating sequential events. The event text… |
| 1.3.6.1.4.1.33.6.1.11.1.2 | ColumneventText | read-only | mandatory | The text of the event, including date, time and other information. Corresponds directly to the individual event text in the MANAGER EVENTS display. |
| 1.3.6.1.4.1.33.6.1.12 | ScalarbasicDeviceNumber | read-only | mandatory | The system's number of mass-storage devices. |
| 1.3.6.1.4.1.33.6.1.13 | TabledeviceTable | not-accessible | mandatory | A list of device entries. The number of entries is given by basicDeviceNumber. |
| 1.3.6.1.4.1.33.6.1.13.1 | RowdeviceEntry | not-accessible | mandatory | Parameter values for a device entry. |
| 1.3.6.1.4.1.33.6.1.13.1.1 | ColumndeviceIndex | read-only | mandatory | In identification number for a device, in the range 1 to basicDeviceNumber |
| 1.3.6.1.4.1.33.6.1.13.1.2 | ColumndeviceName | read-only | mandatory | A name by which the device is known in other displays, such as 'C1' or 'D2'. |
| 1.3.6.1.4.1.33.6.1.13.1.3 | ColumndeviceDescr | read-only | mandatory | Details of the device type, including, for example, size, manufacturer, Flash versus RAM, and such. Corresponds directly to the value labeled 'Device Type: in … |
| 1.3.6.1.4.1.33.6.1.13.1.4 | ColumndeviceOperation | read-only | mandatory | Current operational state of the device. Corresponds directly the value labeled 'Device Operation:' in the MANAGER DEVICE STATUS display. |
| 1.3.6.1.4.1.33.6.1.13.1.5 | ColumndeviceFormat | read-only | mandatory | Formatting status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS dis… |
| 1.3.6.1.4.1.33.6.1.13.1.6 | ColumndeviceProtection | read-only | mandatory | Write-protect status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS … |
| 1.3.6.1.4.1.33.6.1.13.1.7 | ColumndeviceFormatMedium | read-write | mandatory | Control to cause formatting of the medium in the device. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Set… |
| 1.3.6.1.4.1.33.6.1.13.1.8 | ColumndeviceGetFile | read-write | mandatory | Control to cause getting a file to the device from a remote host system. In response to a get-request or get-next-request, the agent always returns 'ready' for… |
| 1.3.6.1.4.1.33.6.1.13.1.9 | ColumndeviceGetFileHostIdentificationType | read-write | mandatory | The type of identification value in deviceIdentification. Corresponds indirectly to ADDRESS in the GET DEVICE command. This object may not be set outside the c… |
| 1.3.6.1.4.1.33.6.1.13.1.10 | ColumndeviceGetFileHostIdentification | read-write | mandatory | Identification of the host to get the file from, with type depending on deviceIdentificationType. Corresponds directly to ADDRESS in the GET DEVICE command. Th… |
| 1.3.6.1.4.1.33.6.1.13.1.11 | ColumndeviceGetFileName | read-write | mandatory | The name of the file to get. Corresponds directly to LOAD FILE in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFi… |
| 1.3.6.1.4.1.33.6.2 | Nodedump | |||
| 1.3.6.1.4.1.33.6.2.1 | ScalardumpService | read-write | mandatory | Control for allowing dump service for any client. Corresponds directly to DUMP and the value labeled 'Dump:' in the MANAGER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.6.2.2 | ScalardumpDrive | read-write | mandatory | Identification number of the disk drive where dumps are stored. Corresponds directly to DUMP DRIVE and the value labeled 'Dump Drive:' in the MANAGER CHARACTER… |
| 1.3.6.1.4.1.33.6.2.3 | ScalardumpMerit | read-write | mandatory | Relative preference for this dump server over others. Corresponds directly to DUMP MERIT and the value labeled 'Dump Merit:' in the MANAGER CHARACTERISTICS dis… |
| 1.3.6.1.4.1.33.6.2.4 | ScalardumpSize | read-write | mandatory | Type of dump file to keep. Corresponds directly to DUMP SIZE and the value labeled 'Dump Size:' in the MANAGER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.6.2.5 | ScalardumpCompleted | read-only | mandatory | The number of dumps completed since system initialization. Corresponds directly to the value labeled 'Dump Operations Completed:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.2.6 | ScalardumpActive | read-only | mandatory | The number of dumps in progress. Corresponds directly to the value labeled 'Currently Dumping:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.2.7 | ScalardumpFileNumber | read-only | mandatory | The number of dump files currently stored. Corresponds directly to the value labeled 'Network dump files' and 'files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.2.8 | TabledumpFileTable | not-accessible | mandatory | A list of dump file entries. The number of entries is given by dumpFileNumber. |
| 1.3.6.1.4.1.33.6.2.8.1 | RowdumpFileEntry | not-accessible | mandatory | Parameter values for a dump file entry. |
| 1.3.6.1.4.1.33.6.2.8.1.1 | ColumndumpFileIdentificationType | read-only | mandatory | The type of identification value in dumpFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Network dump files' in the MANAG… |
| 1.3.6.1.4.1.33.6.2.8.1.2 | ColumndumpFileIdentification | read-only | mandatory | Identification of the dump file, an Ethernet address, as indicated by dumpFileIdentificationType. Corresponds indirectly to a file name part in the section lab… |
| 1.3.6.1.4.1.33.6.2.8.1.3 | ColumndumpFileEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER DUMP FILES command. Actual removal of the entr… |
| 1.3.6.1.4.1.33.6.2.8.1.4 | ColumndumpFileCreation | read-only | mandatory | The time the dump file was created. Corresponds directly to a date and time in the section labeled 'Network dump files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.2.8.1.5 | ColumndumpFileSize | read-only | mandatory | The number of bytes stored in the dump file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Network dump files' in the MANAGER FILES… |
| 1.3.6.1.4.1.33.6.3 | Nodeload | |||
| 1.3.6.1.4.1.33.6.3.1 | ScalarloadService | read-write | mandatory | Control for allowing load service for any client. Corresponds directly to LOAD and the value labeled 'Load:' in the MANAGER CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.6.3.2 | ScalarloadMerit | read-write | mandatory | Relative preference for this load server over others. Corresponds directly to LOAD MERIT and the value labeled 'Load Merit:' in the MANAGER CHARACTERISTICS dis… |
| 1.3.6.1.4.1.33.6.3.3 | ScalarloadCompleted | read-only | mandatory | The number of loads completed since system initialization. Corresponds directly to the value labeled 'Load Operations Completed:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.3.4 | ScalarloadActive | read-only | mandatory | The number of loads in progress. Corresponds directly to the value labeled 'Currently Loading:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.3.5 | ScalarloadFileNumber | read-only | mandatory | The number of load files currently stored. Corresponds directly to the value labeled 'Load image files' and 'files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.3.6 | TableloadFileTable | not-accessible | mandatory | A list of load file entries. The number of entries is given by loadFileNumber. |
| 1.3.6.1.4.1.33.6.3.6.1 | RowloadFileEntry | not-accessible | mandatory | Parameter values for a load file entry. |
| 1.3.6.1.4.1.33.6.3.6.1.1 | ColumnloadFileName | read-only | mandatory | The name of a load file. Corresponds directly to a file name part in the section labeled 'Load image files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.3.6.1.2 | ColumnloadFileCreation | read-only | mandatory | The time the load file was created. Corresponds directly to a date and time in the section labeled 'Load image files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.3.6.1.3 | ColumnloadFileSize | read-only | mandatory | The number of bytes stored in the load file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Load image files' in the MANAGER FILES d… |
| 1.3.6.1.4.1.33.6.3.6.1.4 | ColumnloadFileSoftwareVersionType | read-only | mandatory | The software version type of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FI… |
| 1.3.6.1.4.1.33.6.3.6.1.5 | ColumnloadFileSoftwareVersion | read-only | mandatory | The software version of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FILES d… |
| 1.3.6.1.4.1.33.6.4 | Nodeparam | |||
| 1.3.6.1.4.1.33.6.4.1 | ScalarparamService | read-write | mandatory | Control for allowing parameter storage service for any client. Corresponds directly to PARAMETER SERVICE and the value labeled 'Parameter Service:' in the MANA… |
| 1.3.6.1.4.1.33.6.4.2 | ScalarparamDefaultService | read-write | mandatory | Control for allowing default parameter loading service for any client. Corresponds directly to PARAMETER DEFAULT SERVICE and the value labeled 'Parameter Defau… |
| 1.3.6.1.4.1.33.6.4.3 | ScalarparamDrive | read-write | mandatory | Identification number of the disk drive where parameters are stored. Corresponds directly to PARAMETER DRIVE and the value labeled 'Parameter Drive:' in the MA… |
| 1.3.6.1.4.1.33.6.4.4 | ScalarparamActive | read-only | mandatory | The number of params in progress. Corresponds directly to the value labeled 'Currently Paraming:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.4.5 | ScalarparamStorageActive | read-only | mandatory | The number of parameter storage operations in progress. Corresponds directly to the value labeled 'Currently saving parameters:' in the MANAGER STATUS display. |
| 1.3.6.1.4.1.33.6.4.6 | ScalarparamFileNumber | read-only | mandatory | The number of parameter files currently stored. Corresponds directly to the value labeled 'Parameter files' and 'files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.4.7 | TableparamFileTable | not-accessible | mandatory | A list of param file entries. The number of entries is given by paramFileNumber. |
| 1.3.6.1.4.1.33.6.4.7.1 | RowparamFileEntry | not-accessible | mandatory | Parameter values for a param file entry. |
| 1.3.6.1.4.1.33.6.4.7.1.1 | ColumnparamFileIdentificationType | read-only | mandatory | The type of identification value in paramFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Parameter files' in the MANAGER… |
| 1.3.6.1.4.1.33.6.4.7.1.2 | ColumnparamFileIdentification | read-only | mandatory | Identification of the param file, an Ethernet address, as indicated by paramFileIdentificationType. Corresponds indirectly to a file name part in the section l… |
| 1.3.6.1.4.1.33.6.4.7.1.3 | ColumnparamFileEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER PARAMETER FILES command. Actual removal of the… |
| 1.3.6.1.4.1.33.6.4.7.1.4 | ColumnparamFileWrite | read-only | mandatory | The time the parameter file was last written. Corresponds directly to a date and time in the section labeled 'Parameter files' in the MANAGER FILES display. |
| 1.3.6.1.4.1.33.6.4.7.1.5 | ColumnparamFileSize | read-only | mandatory | The number of bytes stored in the param file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Parameter files' in the MANAGER FILES d… |
| 1.3.6.1.4.1.33.6.4.7.1.6 | ColumnparamFileParameterVersion | read-only | mandatory | The version number of the parameter data in the file. Corresponds directly to the value labeled 'ver' in the section labeled 'Parameter files' in the MANAGER F… |
| 1.3.6.1.4.1.33.7 | NodeparamClient | |||
| 1.3.6.1.4.1.33.7.1 | ScalarparamClientLoaderName | read-only | mandatory | The name of the system that most recently provided this system's stored parameters. Corresponds directly to the name value labeled 'Loaded From:' in the PARAME… |
| 1.3.6.1.4.1.33.7.2 | ScalarparamClientLoaderAddressType | read-only | mandatory | The type of network address contained in paramClientLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'loc… |
| 1.3.6.1.4.1.33.7.3 | ScalarparamClientLoaderAddress | read-only | mandatory | The network address of the system that most recently provided this system's stored parameters. Corresponds directly to the address value labeled 'Loaded From:'… |
| 1.3.6.1.4.1.33.7.4 | ScalarparamClientParameterVersion | read-write | mandatory | The version number of the parameters as stored in this system's local memory. Corresponds directly to SERVER PARAMETER VERSION and the value labeled 'Last Upda… |
| 1.3.6.1.4.1.33.7.5 | ScalarparamClientUpdateTime | read-only | mandatory | This system's local date and time when it last attempted to store parameters with a parameter server. Corresponds directly to the values labeled 'Last Update D… |
| 1.3.6.1.4.1.33.7.6 | ScalarparamClientServerCheck | read-write | mandatory | Control over whether or not this system is allowed to check for additional parameter servers. 'enabled' allows checking. Corresponds directly to PARAMETER SERV… |
| 1.3.6.1.4.1.33.7.7 | ScalarparamClientCheckInterval | read-write | mandatory | The number of minutes between checks for additional parameter servers. Corresponds directly to PARAMETER SERVER CHECK TIMER and the value labeled 'Check Timer:… |
| 1.3.6.1.4.1.33.7.8 | ScalarparamClientCheckNow | read-write | mandatory | Control to cause this system to immediately check for additional parameter servers. The agent always returns 'ready' for this value. Setting the value to 'read… |
| 1.3.6.1.4.1.33.7.9 | ScalarparamClientServerLimit | read-write | mandatory | The maximum number of parameter servers this system is allowed to remember at the same time. Corresponds directly to PARAMETER SERVER LIMIT and the value label… |
| 1.3.6.1.4.1.33.7.10 | ScalarparamClientRetransmitInterval | read-write | mandatory | The number of minutes between this system's attempts to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to… |
| 1.3.6.1.4.1.33.7.11 | ScalarparamClientRetransmitLimit | read-write | mandatory | The maximum number of attempts by this system to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAME… |
| 1.3.6.1.4.1.33.7.12 | ScalarparamClientState | read-only | mandatory | This system's state with regard to update attempts. The value meanings are: other none of the following idle no update in progress internal internal state of n… |
| 1.3.6.1.4.1.33.7.13 | ScalarparamClientProtocolErrors | read-only | mandatory | The number of invalid parameter service protocol messages received by this system. Corresponds directly to the value labeled 'Bad Parameter Messages:' in the P… |
| 1.3.6.1.4.1.33.7.14 | ScalarparamClientServerRejects | read-only | mandatory | The number of parameter servers this system rejected due to exceeding paramClientServerLimit. Corresponds directly to the value labeled 'Rejected Servers:' in … |
| 1.3.6.1.4.1.33.7.15 | ScalarparamClientServerNumber | read-only | mandatory | The number of parameter servers known to this system, indicating the number of entries in serverTable. Corresponds directly to the value labeled 'Parameter Ser… |
| 1.3.6.1.4.1.33.7.16 | TableparamServerTable | not-accessible | mandatory | A list of parameter server entries. The number of entries is given by the value of paramClientServerNumber. |
| 1.3.6.1.4.1.33.7.16.1 | RowparamServerEntry | not-accessible | mandatory | Status and parameter values for a parameter server. |
| 1.3.6.1.4.1.33.7.16.1.1 | ColumnparamServerName | read-write | mandatory | The server's name, unique within this system. Always 16 characters, null padded on the end. Corresponds directly to the name used to create the entry and the v… |
| 1.3.6.1.4.1.33.7.16.1.2 | ColumnparamServerEntryStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR/PURGE PARAMETER SERVER command. Actual removal of the en… |
| 1.3.6.1.4.1.33.7.16.1.3 | ColumnparamServerAddressType | read-write | mandatory | The type of network address contained in paramServerAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' me… |
| 1.3.6.1.4.1.33.7.16.1.4 | ColumnparamServerAddress | read-write | mandatory | The server's network address. Corresponds directly to the value labeled 'Address' in the PARAMETER SERVER display. |
| 1.3.6.1.4.1.33.7.16.1.5 | ColumnparamServerStoredVersion | read-only | mandatory | Parameter version number currently stored at the server. Corresponds directly to the value labeled 'Version' in the PARAMETER SERVER display. |
| 1.3.6.1.4.1.33.7.16.1.6 | ColumnparamServerStoredTime | read-only | mandatory | The server's date and time when it stored the parameters of version paramServerStoredVersion. Corresponds directly to the value labeled 'Date' in the PARAMETER… |
| 1.3.6.1.4.1.33.7.16.1.7 | ColumnparamServerStoredStatus | read-only | mandatory | Status of this system's parameters with respect to the server. Corresponds directly to the value labeled 'Status' in the PARAMETER SERVER display. The value me… |
| 1.3.6.1.4.1.33.7.16.1.8 | ColumnparamServerStoredFailure | read-only | mandatory | When paramServerStoredStatus is 'failed' or 'failing', the reason for the most recent failure. Corresponds directly to the value labeled 'Reason' in the PARAME… |
| 1.3.6.1.4.1.33.10 | NodexInternet | |||
| 1.3.6.1.4.1.33.10.1 | NodexIp | |||
| 1.3.6.1.4.1.33.10.1.1 | ScalaripGatewayAddress1 | read-write | mandatory | The internet address of the system's primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY G… |
| 1.3.6.1.4.1.33.10.1.2 | ScalaripGatewayAddress2 | read-write | mandatory | The internet address of the system's secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECOND… |
| 1.3.6.1.4.1.33.10.1.3 | ScalaripAutoSubnetMask | read-write | mandatory | A control for automatic determination of subnet mask. 'disabled' indicates the system must use the mask as configured by the network manager. 'enabled' indicat… |
| 1.3.6.1.4.1.33.10.1.4 | ScalaripReassembly | read-write | mandatory | A control for reassembly of IP fragments. Corresponds directly to SERVER INTERNET REASSEMBLY and the value labeled 'Reassembly:' in the SERVER INTERNET CHARACT… |
| 1.3.6.1.4.1.33.10.2 | NodexTcp | |||
| 1.3.6.1.4.1.33.10.2.1 | TabletcpPortTable | not-accessible | mandatory | A list of TCP character port entries. |
| 1.3.6.1.4.1.33.10.2.1.1 | RowtcpPortEntry | not-accessible | mandatory | TCP parameter values for a character port. |
| 1.3.6.1.4.1.33.10.2.1.1.1 | ColumntcpPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.2.1.1.2 | ColumntcpPortConnectByAddress | read-write | mandatory | A control for requesting outgoing connection by internet address. 'disabled' indicates outgoing connections must be by Domain name. 'enabled' indicates that ou… |
| 1.3.6.1.4.1.33.10.2.1.1.3 | ColumntcpPortWindowSize | read-write | mandatory | Size of the TCP window for TCP connections on the port. Corresponds directly to PORT INTERNET TCP WINDOW SIZE and the value labeled 'TCP Window Size:' in the P… |
| 1.3.6.1.4.1.33.10.3 | NodesnmpAgent | |||
| 1.3.6.1.4.1.33.10.3.1 | ScalarsnmpAgentGetCommunity | read-write | mandatory | The SNMP community name allowed to perform get-requests or get-next requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent … |
| 1.3.6.1.4.1.33.10.3.2 | ScalarsnmpAgentSetCommunity | read-write | mandatory | The SNMP community name allowed to perform set-requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the co… |
| 1.3.6.1.4.1.33.10.3.3 | ScalarsnmpAgentTrapCommunity | read-write | mandatory | The SNMP community name sent in traps from this agent. Use of this value preserves case. Corresponds directly to SERVER INTERNET SNMP TRAP COMMUNITY and the va… |
| 1.3.6.1.4.1.33.10.3.4 | ScalarsnmpAgentGetClientNumber | read-only | mandatory | The number of client source addresses allowed to perform get-requests or get-next requests to this agent. If the value is 0, the agent does not check source ad… |
| 1.3.6.1.4.1.33.10.3.5 | ScalarsnmpAgentSetClientNumber | read-only | mandatory | The number of client source addresses allowed to perform set-requests to this agent. If the value is 0, the agent does not check source address for these opera… |
| 1.3.6.1.4.1.33.10.3.6 | ScalarsnmpAgentTrapClientNumber | read-only | mandatory | The number of client source addresses to which this agent sends traps. If the value is 0, the agent does not perform this operation. Corresponds indirectly to … |
| 1.3.6.1.4.1.33.10.3.7 | TablegetClientTable | not-accessible | mandatory | A list of get client entries. The number of entries is given by the value of snmpAgentGetClientNumber. |
| 1.3.6.1.4.1.33.10.3.7.1 | RowgetClientEntry | not-accessible | mandatory | Parameter values for a get client. |
| 1.3.6.1.4.1.33.10.3.7.1.1 | ColumngetClientIndex | read-only | mandatory | Identification of a get client entry. Corresponds directly to the number in the label 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.7.1.2 | ColumngetClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.7.1.3 | ColumngetClientAddressType | read-write | mandatory | The type of network address contained in getClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an I… |
| 1.3.6.1.4.1.33.10.3.7.1.4 | ColumngetClientAddress | read-write | mandatory | The client's network address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds directly to t… |
| 1.3.6.1.4.1.33.10.3.8 | TablesetClientTable | not-accessible | mandatory | A list of set client entries. The number of entries is given by the value of snmpAgentSetClientNumber. |
| 1.3.6.1.4.1.33.10.3.8.1 | RowsetClientEntry | not-accessible | mandatory | Parameter values for a set client. |
| 1.3.6.1.4.1.33.10.3.8.1.1 | ColumnsetClientIndex | read-only | mandatory | Identification of a set client entry. Corresponds directly to the number in the label 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.8.1.2 | ColumnsetClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.8.1.3 | ColumnsetClientAddressType | read-write | mandatory | The type of network address contained in setClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an I… |
| 1.3.6.1.4.1.33.10.3.8.1.4 | ColumnsetClientAddress | read-write | mandatory | The client's network address. When setting this value, the requester must supply setClientAddressType. If setClientAddressType does not accompany setClientAddr… |
| 1.3.6.1.4.1.33.10.3.9 | TabletrapClientTable | not-accessible | mandatory | A list of trap client entries. The number of entries is given by the value of snmpAgentTrapClientNumber. |
| 1.3.6.1.4.1.33.10.3.9.1 | RowtrapClientEntry | not-accessible | mandatory | Parameter values for a trap client. |
| 1.3.6.1.4.1.33.10.3.9.1.1 | ColumntrapClientIndex | read-only | mandatory | Identification of a trap client entry. Corresponds directly to the number in the label 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.9.1.2 | ColumntrapClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.9.1.3 | ColumntrapClientAddressType | read-write | mandatory | The type of network address contained in trapClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an … |
| 1.3.6.1.4.1.33.10.3.9.1.4 | ColumntrapClientAddress | read-write | mandatory | The client's network address. When setting this value, the requester must supply trapClientAddressType. If trapClientAddressType does not accompany trapClientA… |
| 1.3.6.1.4.1.33.10.4 | NodedomainResolver | |||
| 1.3.6.1.4.1.33.10.4.1 | ScalardomainResolverSuffix | read-write | mandatory | A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DO… |
| 1.3.6.1.4.1.33.10.4.2 | ScalardomainResolverAddress1 | read-write | mandatory | The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corres… |
| 1.3.6.1.4.1.33.10.4.3 | ScalardomainResolverAddress2 | read-write | mandatory | The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corres… |
| 1.3.6.1.4.1.33.10.4.4 | ScalardomainResolverTtl | read-write | mandatory | The number of hours to keep received Domain information. Corresponds directly to SERVER INTERNET DOMAIN TTL and the value labeled ' Domain TTL:' in the SERVER … |
| 1.3.6.1.4.1.33.10.4.5 | ScalardomainResolverNameNumber | read-only | mandatory | The number of Domain name mappings in this system's name cache. |
| 1.3.6.1.4.1.33.10.4.6 | TablenameTable | not-accessible | mandatory | A list of Domain name entries. The number of entries is given by the value of domainResolverNameNumber. |
| 1.3.6.1.4.1.33.10.4.6.1 | RownameEntry | not-accessible | mandatory | Parameter values for a Domain name. |
| 1.3.6.1.4.1.33.10.4.6.1.1 | ColumnnameName | read-only | mandatory | A fully qualified domain name. Corresponds directly to the value labeled 'Domain Name' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.6.1.2 | ColumnnameAddress | read-write | mandatory | An Internet address corresponding to the Domain name. Corresponds directly to the value labeled 'Internet Address' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.6.1.3 | ColumnnameStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE DOMAIN command. Actual removal of the entry is implement… |
| 1.3.6.1.4.1.33.10.4.6.1.4 | ColumnnameSource | read-only | mandatory | Source of this entry. The value meanings are: local defined by manager (LOCAL) primary obtained from a primary name server secondary obtained from a secondary … |
| 1.3.6.1.4.1.33.10.4.6.1.5 | ColumnnameTtl | read-only | mandatory | The number of minutes remaining in the entry's time to live. Corresponds directly to the value labeled 'TTL' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.5 | Nodeslip | |||
| 1.3.6.1.4.1.33.10.5.1 | TableslipTable | not-accessible | mandatory | A list of SLIP character port entries. |
| 1.3.6.1.4.1.33.10.5.1.1 | RowslipEntry | not-accessible | mandatory | Parameter values for a SLIP port. |
| 1.3.6.1.4.1.33.10.5.1.1.1 | ColumnslipIndex | read-only | mandatory | An index value that uniquely identifies a port that can run SLIP. The port identified by a particular value of this index is the same port as identified by cha… |
| 1.3.6.1.4.1.33.10.5.1.1.2 | ColumnslipState | read-write | mandatory | A control indicating whether SLIP is in operation on the port. Corresponds directly to PORT INTERNET SLIP and the value labeled 'SLIP' in the PORT CHARACTERIST… |
| 1.3.6.1.4.1.33.10.5.1.1.3 | ColumnslipLocalAddress | read-write | mandatory | The IP address assigned to the port. Corresponds directly to PORT SLIP ADDRESS and the value labeled 'SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS disp… |
| 1.3.6.1.4.1.33.10.5.1.1.4 | ColumnslipRemoteAddress | read-write | mandatory | The IP address of the remote system attached to the port. Corresponds directly to PORT SLIP REMOTE and the value labeled 'Remote SLIP Address:' in the PORT ALT… |
| 1.3.6.1.4.1.33.10.5.1.1.5 | ColumnslipMask | read-write | mandatory | The subnet mask to use for SLIP operation on the port. Corresponds directly to PORT SLIP MASK and the value labeled 'SLIP Mask:' in the PORT ALTERNATE CHARACTE… |
| 1.3.6.1.4.1.33.10.5.1.1.6 | ColumnslipPortPacketsReceived | read-only | mandatory | The number of SLIP packets received from the port. Corresponds directly to the value labeled 'Serial Packets Received:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.7 | ColumnslipPortPacketsSent | read-only | mandatory | The number of SLIP packets sent to the port. Corresponds directly to the value labeled 'Serial Packets Sent:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.8 | ColumnslipPortPacketsDiscarded | read-only | mandatory | The number of SLIP packets received from the port and discarded. Corresponds directly to the value labeled 'Serial Packets Discarded:' in the PORT COUNTERS dis… |
| 1.3.6.1.4.1.33.10.5.1.1.9 | ColumnslipPortPacketLengthErrors | read-only | mandatory | The number of SLIP packets received from the port with an incorrect number of bytes. Corresponds directly to the value labeled 'Serial Packet Length Errors:' i… |
| 1.3.6.1.4.1.33.10.5.1.1.10 | ColumnslipPortPacketChecksumErrors | read-only | mandatory | The number of SLIP packets received from the port with an invalid checksum. Corresponds directly to the value labeled 'Serial Packet Checksum Errors:' in the P… |
| 1.3.6.1.4.1.33.10.5.1.1.11 | ColumnslipNetworkPacketsReceived | read-only | mandatory | The number of SLIP packets received from the network for this port. Corresponds directly to the value labeled 'Network Packets Received:' in the PORT COUNTERS … |
| 1.3.6.1.4.1.33.10.5.1.1.12 | ColumnslipNetworkPacketsSent | read-only | mandatory | The number of SLIP packets sent to the network from this port. Corresponds directly to the value labeled 'Network Packets Sent:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.13 | ColumnslipNetworkPacketsDiscarded | read-only | mandatory | The number of SLIP packets received from the network for this port and discarded. Corresponds directly to the value labeled 'Network Packets Discarded:' in the… |
| 1.3.6.1.4.1.33.10.6 | Nodetelnet | |||
| 1.3.6.1.4.1.33.10.6.1 | TabletelnetPortTable | not-accessible | mandatory | A list of Telnet character port entries. |
| 1.3.6.1.4.1.33.10.6.1.1 | RowtelnetPortEntry | not-accessible | mandatory | Telnet parameter values for a character port. |
| 1.3.6.1.4.1.33.10.6.1.1.1 | ColumntelnetPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.6.1.1.2 | ColumntelnetPortIncomingTcpPort | read-write | mandatory | The TCP port number offered for incoming connections to this character port. Corresponds directly to PORT TELNET REMOTE PORT and the value labeled 'Remote Port… |
| 1.3.6.1.4.1.33.10.6.1.1.3 | ColumntelnetPortOutgoingTcpPort | read-only | mandatory | The TCP port number used by default for outgoing connections from this character port. Corresponds directly to PORT TELNET DEFAULT PORT and the value labeled '… |
| 1.3.6.1.4.1.33.10.6.1.1.4 | ColumntelnetPortNewlineTranslation | read-write | mandatory | Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network, before sending the newline to the character port. The value indicates t… |
| 1.3.6.1.4.1.33.10.6.1.1.5 | ColumntelnetPortTerminalType | read-write | mandatory | The terminal type character string for Telnet negotiations. Corresponds directly to PORT TELNET TERMINALTYPE and the value labeled 'TerminalType:' in the PORT … |
| 1.3.6.1.4.1.33.10.6.1.1.6 | ColumntelnetPortEorReflection | read-write | mandatory | Control for end-of-record handshake. Corresponds directly to PORT TELNET EOR REFLECTION and the value labeled 'EOR Reflection:' in the PORT TELNET CHARACTERIST… |
| 1.3.6.1.4.1.33.10.6.1.1.7 | ColumntelnetPortBinaryMode | read-write | mandatory | Control for operation of Telnet binary mode. The value meanings are: disabled refuse binary mode negotiation (INTERACTIVE) flowControl pass all but XON and XOF… |
| 1.3.6.1.4.1.33.10.6.2 | TabletelnetSerialPortTable | not-accessible | mandatory | A list of Telnet character port entries. |
| 1.3.6.1.4.1.33.10.6.2.1 | RowtelnetSerialPortEntry | not-accessible | mandatory | Telnet parameter values for a character port. |
| 1.3.6.1.4.1.33.10.6.2.1.1 | ColumntelnetSerialPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.6.2.1.2 | ColumntelnetSerialPortOptionDisplay | read-write | mandatory | Control for display of Telnet option negotiations. Corresponds directly to PORT TELNET OPTION DISPLAY and the value labeled 'Option Display:' in the PORT TELNE… |
| 1.3.6.1.4.1.33.10.6.2.1.3 | ColumntelnetSerialPortCsiEscape | read-write | mandatory | Control for translation of 8-bit escape sequences received from the character port to 7-bit equivalents before transmission to the remote partner. Corresponds … |
| 1.3.6.1.4.1.33.10.6.2.1.4 | ColumntelnetSerialPortEchoMode | read-write | mandatory | Control for who echoes characters that come from the character port. The value meanings are: local terminal server echoes locally remote remote system echoes C… |
| 1.3.6.1.4.1.33.10.6.2.1.5 | ColumntelnetSerialPortNewlineMode | read-write | mandatory | Translation to apply to newline (carriage return) received from the character port, before sending the newline to the remote partner. The correspondence to com… |
| 1.3.6.1.4.1.33.10.6.2.1.6 | ColumntelnetSerialPortTransmitMode | read-write | mandatory | Criterion for deciding to send to the remote partner characters received from the character port. Corresponds directly to PORT TELNET TRANSMIT and the value la… |
| 1.3.6.1.4.1.33.10.6.2.1.7 | ColumntelnetSerialPortTransmitCharacterTimes | read-write | mandatory | Number of character times to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT IDLETIME… |
| 1.3.6.1.4.1.33.10.6.2.1.8 | ColumntelnetSerialPortAbortOutputCharacter | read-write | mandatory | Character input from the character port to cause aborting output. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ABORT… |
| 1.3.6.1.4.1.33.10.6.2.1.9 | ColumntelnetSerialPortAttentionCharacter | read-write | mandatory | Character input from the character port to cause an attention notification to the remote partner. The value 0 indicates no character has this effect. Correspon… |
| 1.3.6.1.4.1.33.10.6.2.1.10 | ColumntelnetSerialPortEraseKeyCharacter | read-write | mandatory | Character input from the character port to cause erasure of the previous input character. The value 0 indicates no character has this effect. Corresponds direc… |
| 1.3.6.1.4.1.33.10.6.2.1.11 | ColumntelnetSerialPortEraseLineCharacter | read-write | mandatory | Character input from the character port to cause erasure of the previous line of input. The value 0 indicates no character has this effect. Corresponds directl… |
| 1.3.6.1.4.1.33.10.6.2.1.12 | ColumntelnetSerialPortInterruptCharacter | read-write | mandatory | Character input from the character port to cause sending an interrupt notification to the remote partner. The value 0 indicates no character has this effect. C… |
| 1.3.6.1.4.1.33.10.6.2.1.13 | ColumntelnetSerialPortQueryCharacter | read-write | mandatory | Character input from the character port to cause sending a status query to the remote partner. The value 0 indicates no character has this effect. Corresponds … |
| 1.3.6.1.4.1.33.10.6.2.1.14 | ColumntelnetSerialPortSynchronizeCharacter | read-write | mandatory | Character input from the character port to cause sending a synchronization attempt to the remote partner. The value 0 indicates no character has this effect. C… |
| 1.3.6.1.4.1.33.10.7 | Nodetn3270 | |||
| 1.3.6.1.4.1.33.10.7.1 | Scalartn3270DeviceNumber | read-only | mandatory | The number of entries in the tn3270 Device table. |
| 1.3.6.1.4.1.33.10.7.2 | Scalartn3270LanguageNumber | read-only | mandatory | The number of entries in the tn3270 Language table. |
| 1.3.6.1.4.1.33.10.7.3 | Scalartn3270PortKeymapStatus | read-write | mandatory | Control for individual ports to create their own keymaps. Corresponds directly to SERVER TN3270 PORT KEYMAPS and the value labeled 'Port Keymaps:' in the SERVE… |
| 1.3.6.1.4.1.33.10.7.4 | Tabletn3270DeviceTable | not-accessible | mandatory | A list of tn3270 terminal device entries. |
| 1.3.6.1.4.1.33.10.7.4.1 | Rowtn3270DeviceEntry | not-accessible | mandatory | Tn3270 parameter values for a terminal device entry. |
| 1.3.6.1.4.1.33.10.7.4.1.1 | Columntn3270DeviceName | read-write | mandatory | The name of a generic terminal device. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display. |
| 1.3.6.1.4.1.33.10.7.4.1.2 | Columntn3270DeviceStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the PURGE SERVER TN3270 DEVICE command. It is an implemen… |
| 1.3.6.1.4.1.33.10.7.4.1.3 | Columntn3270DeviceType | read-write | mandatory | The terminal type character string for use when tn3270DeviceTn3270Type is insufficient. Corresponds directly to SERVER TN3270 DEVICE TERMINALTYPE and the value… |
| 1.3.6.1.4.1.33.10.7.4.1.4 | Columntn3270Device3278Model | read-write | mandatory | The 3278 model for the device. Corresponds directly to SERVER TN3270 DEVICE TN3278Model and the value labeled 'Tn3278Model:' in the SERVER TN3270 DEVICE displa… |
| 1.3.6.1.4.1.33.10.7.4.1.5 | Columntn3270DeviceKeyNumber | read-only | mandatory | The number of Key table entries for this device. |
| 1.3.6.1.4.1.33.10.7.4.1.6 | Columntn3270DeviceScreenNumber | read-only | mandatory | The number of Screen table entries for this device. |
| 1.3.6.1.4.1.33.10.7.5 | Tabletn3270KeyTable | not-accessible | mandatory | A list of tn3270 key entries by device. |
| 1.3.6.1.4.1.33.10.7.5.1 | Rowtn3270KeyEntry | not-accessible | mandatory | Tn3270 parameter values for a key entry for a device. |
| 1.3.6.1.4.1.33.10.7.5.1.1 | Columntn3270KeyDeviceName | read-only | mandatory | The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER T… |
| 1.3.6.1.4.1.33.10.7.5.1.2 | Columntn3270KeyName | read-only | mandatory | The key name to which this entry applies. Corresponds directly to the key portion of SERVER TN3270 DEVICE KEYMAP and the value labeled '3270-key' in the 'Keyma… |
| 1.3.6.1.4.1.33.10.7.5.1.3 | Columntn3270KeyStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.5.1.4 | Columntn3270KeyCharacterSequence | read-write | mandatory | The ASCII character sequence for the key. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'KeyCode' in… |
| 1.3.6.1.4.1.33.10.7.5.1.5 | Columntn3270KeyDescription | read-write | mandatory | Descriptive text for the key. Corresponds directly to the description portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'Description' in the SERVER … |
| 1.3.6.1.4.1.33.10.7.6 | Tabletn3270ScreenTable | not-accessible | mandatory | A list of tn3270 screen action entries by device. |
| 1.3.6.1.4.1.33.10.7.6.1 | Rowtn3270ScreenEntry | not-accessible | mandatory | Tn3270 parameter values for a screen action entry for a device. |
| 1.3.6.1.4.1.33.10.7.6.1.1 | Columntn3270ScreenDeviceName | read-only | mandatory | The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER T… |
| 1.3.6.1.4.1.33.10.7.6.1.2 | Columntn3270ScreenActionName | read-only | mandatory | The screen action to which this entry applies. Corresponds directly to the action portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'Terminal Fun… |
| 1.3.6.1.4.1.33.10.7.6.1.3 | Columntn3270ScreenStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.6.1.4 | Columntn3270ScreenCharacterSequence | read-write | mandatory | The ASCII character sequence for the screen action. Some actions may have a lesser length limit. Corresponds directly to the escape-sequence portion of SERVER … |
| 1.3.6.1.4.1.33.10.7.7 | Tabletn3270LanguageTable | not-accessible | mandatory | A list of tn3270 language entries. |
| 1.3.6.1.4.1.33.10.7.7.1 | Rowtn3270LanguageEntry | not-accessible | mandatory | Tn3270 parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.7.1.1 | Columntn3270LanguageName | read-write | mandatory | The name of language for character translation tables. Corresponds directly to SERVER TN3270 LANGUAGE and the value labeled 'Language Name:' in the SERVER LANG… |
| 1.3.6.1.4.1.33.10.7.7.1.2 | Columntn3270LanguageStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.8 | TableeToALanguageTable | not-accessible | mandatory | A list of language EBCDIC to ASCII conversion entries. |
| 1.3.6.1.4.1.33.10.7.8.1 | RoweToALanguageEntry | not-accessible | mandatory | EBCDIC to ASCII parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.8.1.1 | ColumneToALanguageName | read-only | mandatory | The name of language from the language table. |
| 1.3.6.1.4.1.33.10.7.8.1.2 | ColumneToAOffset | read-only | mandatory | EBCDIC character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 L… |
| 1.3.6.1.4.1.33.10.7.8.1.3 | ColumneToAValue | read-write | mandatory | ASCII character value for the EBCDIC offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled… |
| 1.3.6.1.4.1.33.10.7.9 | TableaToELanguageTable | not-accessible | mandatory | A list of language ASCII to EBCDIC conversion entries. |
| 1.3.6.1.4.1.33.10.7.9.1 | RowaToELanguageEntry | not-accessible | mandatory | ASCII to EBCDIC parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.9.1.1 | ColumnaToELanguageName | read-only | mandatory | The name of language from the language table. |
| 1.3.6.1.4.1.33.10.7.9.1.2 | ColumnaToEOffset | read-only | mandatory | ASCII character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LA… |
| 1.3.6.1.4.1.33.10.7.9.1.3 | ColumnaToEValue | read-write | mandatory | EBCDIC character value for the ASCII offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled… |
| 1.3.6.1.4.1.33.10.7.10 | Tabletn3270PortTable | not-accessible | mandatory | A list of tn3270 character port entries. |
| 1.3.6.1.4.1.33.10.7.10.1 | Rowtn3270PortEntry | not-accessible | mandatory | Parameter values for a tn3270 port. |
| 1.3.6.1.4.1.33.10.7.10.1.1 | Columntn3270PortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.7.10.1.2 | Columntn3270PortDeviceName | read-write | mandatory | The name of a generic terminal device from the tn3270 device table. Corresponds directly to PORT TELNET TN3270 DEVICE and the value labeled 'Tn3270 Device:' in… |
| 1.3.6.1.4.1.33.10.7.10.1.3 | Columntn3270PortLanguageName | read-write | mandatory | The name of language from the tn3270 language table. Corresponds directly to PORT TELNET TN3270 LANGUAGE and the value labeled 'Tn3270 Language:' in the PORT T… |
| 1.3.6.1.4.1.33.10.7.10.1.4 | Columntn3270PortExtendedAttributes | read-write | mandatory | A control indicating that certain 3270 extended attributes are supported on the port. Corresponds directly to PORT TELNET TN3270 XTDATTRS and the label 'Tn3270… |
| 1.3.6.1.4.1.33.10.7.10.1.5 | Columntn3270PortEorNegotiation | read-write | mandatory | A control for negotiation of the Telnet EOR option when establishing a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 EOR and the label… |
| 1.3.6.1.4.1.33.10.7.10.1.6 | Columntn3270PortErrorLock | read-write | mandatory | A control for requiring use the RESET key when the host reports an error during a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 ERRORL… |
| 1.3.6.1.4.1.33.10.8 | Nodekerberos | |||
| 1.3.6.1.4.1.33.10.8.1 | ScalarkerbStatus | read-write | mandatory | A control indicating the level of Kerberos operation on the system. Corresponds directly to SERVER KERBEROS STATUS and the value labeled 'Kerberos Security:' i… |
| 1.3.6.1.4.1.33.10.8.2 | ScalarkerbRealm | read-write | mandatory | The Kerberos realm with which the kerbServerName1 and kerbServerName2 are associated. Corresponds directly to SERVER KERBEROS REALM and the value labeled 'Kerb… |
| 1.3.6.1.4.1.33.10.8.3 | ScalarkerbQueryLimit | read-write | mandatory | The maximum number of attempts the system can make when trying to verify a Kerberos ID. Corresponds directly to SERVER KERBEROS QUERY LIMIT and the value label… |
| 1.3.6.1.4.1.33.10.8.4 | ScalarkerbMasterName | read-write | mandatory | The Domain name of the Kerberos master host system, which holds the Kerberos database. Corresponds directly to SERVER KERBEROS MASTER and the value labeled 'Ke… |
| 1.3.6.1.4.1.33.10.8.5 | ScalarkerbServerName1 | read-write | mandatory | The Domain name of the first Kerberos server to try when the system verifys a Kerberos ID. Corresponds directly to SERVER KERBEROS PRIMARY SERVER and the value… |
| 1.3.6.1.4.1.33.10.8.6 | ScalarkerbServerName2 | read-write | mandatory | The Domain name of the Kerberos server to try when the system verifys a Kerberos ID and cannot reach the Kerberos primary server. Corresponds directly to SERVE… |
| 1.3.6.1.4.1.33.10.8.7 | ScalarkerbInsecureLogins | read-only | mandatory | The number of user logins on ports for which Kerberos user verification is not enabled. Corresponds directly to the value labeled 'Logins without Kerberos:' in… |
| 1.3.6.1.4.1.33.10.8.8 | ScalarkerbSecureLogins | read-only | mandatory | The number of successful user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' i… |
| 1.3.6.1.4.1.33.10.8.9 | ScalarkerbSecureLoginsFailed | read-only | mandatory | The number of verification failures due to incorrect ID or password for attempted user logins on ports for which Kerberos user verification is enabled. Corresp… |
| 1.3.6.1.4.1.33.10.8.10 | ScalarkerbPasswordChangeFailed | read-only | mandatory | The number of user failures to change their Kerberos password due to invalid old password or new password verification. Corresponds directly to the value label… |
| 1.3.6.1.4.1.33.10.8.11 | ScalarkerbError | read-only | mandatory | The error number of the most recent Kerberos-related failure. Corresponds directly to the value labeled 'Last Kerberos Error:' in the SERVER KERBEROS display. … |
| 1.3.6.1.4.1.33.10.8.12 | ScalarkerbErrorTime | read-only | mandatory | The date and time that kerbError was last updated. Corresponds directly to the value labeled 'Occurred:' in the SERVER KERBEROS display. |
| 1.3.6.1.4.1.33.10.8.13 | ScalarkerbMasterAccess | read-only | mandatory | The number of times the system successfully accessed the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and '… |
| 1.3.6.1.4.1.33.10.8.14 | ScalarkerbMasterAccessFailed | read-only | mandatory | The number of times the system failed access to the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Unsuc… |
| 1.3.6.1.4.1.33.10.8.15 | ScalarkerbServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', a… |
| 1.3.6.1.4.1.33.10.8.16 | ScalarkerbServerAccessFailed1 | read-only | mandatory | The number of times the system failed access to the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'U… |
| 1.3.6.1.4.1.33.10.8.17 | ScalarkerbServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2',… |
| 1.3.6.1.4.1.33.10.8.18 | ScalarkerbServerAccessFailed2 | read-only | mandatory | The number of times the system failed access to the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and … |
| 1.3.6.1.4.1.33.10.8.19 | TablekerbPortTable | not-accessible | mandatory | A list of Kerberos character port entries. |
| 1.3.6.1.4.1.33.10.8.19.1 | RowkerbPortEntry | not-accessible | mandatory | Parameter values for a Kerberos port. |
| 1.3.6.1.4.1.33.10.8.19.1.1 | ColumnkerbPortIndex | read-only | mandatory | An index value that uniquely identifies a port could relate to Kerberos. The port identified by a particular value of this index is the same port as identified… |
| 1.3.6.1.4.1.33.10.8.19.1.2 | ColumnkerbPortStatus | read-write | mandatory | A control indicating the level of Kerberos operation on the port. Corresponds directly to PORT KERBEROS and the value 'Kerberos' following the label 'Enabled C… |
| 1.3.6.1.4.1.33.10.9 | NodeportSecurity | |||
| 1.3.6.1.4.1.33.10.9.1 | ScalarpsEntryNumber | read-only | mandatory | The number of security entries in this system's port security table with psEntryStatus of 'valid'. |
| 1.3.6.1.4.1.33.10.9.2 | ScalarpsEntryNumberLimit | read-only | mandatory | The maximum number of security entries in this system's port security table. |
| 1.3.6.1.4.1.33.10.9.3 | ScalarpsEntryInvalidIndex | read-only | mandatory | A value of psEntryIndex for an entry that has psEntryStatus of 'invalid'. A management station may choose this value when adding a new entry. Collisions betwee… |
| 1.3.6.1.4.1.33.10.9.4 | TablepsPortTable | not-accessible | mandatory | A list of port security character port entries. |
| 1.3.6.1.4.1.33.10.9.4.1 | RowpsPortEntry | not-accessible | mandatory | Port security parameter values for a port. |
| 1.3.6.1.4.1.33.10.9.4.1.1 | ColumnpsPortIndex | read-only | mandatory | An index value that uniquely identifies a port for security purposes. The port identified by a particular value of this index is the same port as identified by… |
| 1.3.6.1.4.1.33.10.9.4.1.2 | ColumnpsPortDefaultInboundAccess | read-write | mandatory | The default access to the port for incoming TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT INBOUND and the value labeled 'Inbound Defa… |
| 1.3.6.1.4.1.33.10.9.4.1.3 | ColumnpsPortDefaultOutboundAccess | read-write | mandatory | The default access to the port for outgoing TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT OUTBOUND and the value labeled 'Outbound De… |
| 1.3.6.1.4.1.33.10.9.5 | TablepsTable | not-accessible | mandatory | A list of port security entries. |
| 1.3.6.1.4.1.33.10.9.5.1 | RowpsEntry | not-accessible | mandatory | Port security parameter values for an entry for a port. |
| 1.3.6.1.4.1.33.10.9.5.1.1 | ColumnpsEntryIndex | read-only | mandatory | A small, numeric distinguisher for port security entries. When adding a new entry, the client should specify an unused value, such as psEntryInvalidIndex. Corr… |
| 1.3.6.1.4.1.33.10.9.5.1.2 | ColumnpsEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR INTERNET SECURITY command. It is an implementat… |
| 1.3.6.1.4.1.33.10.9.5.1.3 | ColumnpsEntryAddress | read-write | mandatory | The IP address to which the entry pertains. Corresponds directly to the PORT INTERNET SECURITY internet address and the value labeled 'Internet Address' in the… |
| 1.3.6.1.4.1.33.10.9.5.1.4 | ColumnpsEntryMask | read-write | mandatory | The mask applied to psEntryAddress when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY MASK and the value labeled … |
| 1.3.6.1.4.1.33.10.9.5.1.5 | ColumnpsEntryAccess | read-write | mandatory | The access to the port for TCP connections when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY ALLOW or DENY and t… |
| 1.3.6.1.4.1.33.10.9.5.1.6 | ColumnpsEntryDirection | read-write | mandatory | The direction of TCP connections to which this entry applies. Corresponds directly to PORT INTERNET SECURITY INBOUND or OUTBOUND and the value labeled 'Directi… |
| 1.3.6.1.4.1.33.10.9.5.1.7 | ColumnpsEntryPortMap | read-write | mandatory | The list of character ports to which this entry applies. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on… |
| 1.3.6.1.4.1.33.10.10 | Nodexremote | |||
| 1.3.6.1.4.1.33.10.10.1 | ScalarxremoteServerName1 | read-write | mandatory | The Domain name of the first XREMOTE font server to try for downloading fonts. Corresponds directly to SERVER XREMOTE PRIMARY SERVER and the value labeled 'Xre… |
| 1.3.6.1.4.1.33.10.10.2 | ScalarxremoteServerName2 | read-write | mandatory | The Domain name of the XREMOTE font server to try for downloading fonts and the primary font server does not respond. Corresponds directly to SERVER XREMOTE SE… |
| 1.3.6.1.4.1.33.10.10.3 | ScalarxremoteServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1… |
| 1.3.6.1.4.1.33.10.10.4 | ScalarxremoteServerAccessFailed1 | read-only | mandatory | The number of times the system failed access to the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', an… |
| 1.3.6.1.4.1.33.10.10.5 | ScalarxremoteServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Serve… |
| 1.3.6.1.4.1.33.10.10.6 | ScalarxremoteServerAccessFailed2 | read-only | mandatory | The number of times the system failed access to the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', … |
| 1.3.6.1.4.1.33.10.10.7 | ScalarxremoteSessions | read-only | mandatory | The number of connected XREMOTE sessions. Corresponds directly to the value labeled 'Current Number of Xremote Sessions:' in the SERVER XREMOTE display. |
| 1.3.6.1.4.1.33.10.10.8 | TablexremotePortTable | not-accessible | mandatory | A list of XREMOTE character port entries. |
| 1.3.6.1.4.1.33.10.10.8.1 | RowxremotePortEntry | not-accessible | mandatory | XREMOTE parameter values for a port. |
| 1.3.6.1.4.1.33.10.10.8.1.1 | ColumnxremotePortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.10.8.1.2 | ColumnxremotePortXremote | read-write | mandatory | Control for use of XREMOTE on the port. Corresponds directly to PORT XREMOTE and the presence of the label 'Xremote' following the label 'Enabled Characteristi… |
| 1.3.6.1.4.1.33.10.10.8.1.3 | ColumnxremotePortXdmQuery | read-write | mandatory | The type of query message issued by a port when searching for an X Display Manager (XDM). Corresponds directly to the PORT XDM QUERY and the 'XDM Query:' in th… |
| 1.3.6.1.4.1.33.10.10.8.1.4 | ColumnxremotePortXdmHost | read-write | mandatory | The Domain name or Internet address of the X Display Manager (XDM) for a port. Corresponds directly to the PORT XDM HOST and the 'XDM Host:' in the PORT ALTERN… |
| 1.3.6.1.4.1.33.10.10.9 | ScalarxremoteServerClients | read-only | mandatory | The number of active X clients. Corresponds directly to the value labeled 'Current Number of XClients:' in the SERVER XREMOTE display. |
| 1.3.6.1.4.1.33.10.11 | Noderotary | |||
| 1.3.6.1.4.1.33.10.11.1 | ScalarrotaryNumber | read-only | mandatory | The number of entries in the Rotary table. |
| 1.3.6.1.4.1.33.10.11.2 | TablerotaryTable | not-accessible | mandatory | A list of rotary entries. |
| 1.3.6.1.4.1.33.10.11.2.1 | RowrotaryEntry | not-accessible | mandatory | Parameter values for a rotary. |
| 1.3.6.1.4.1.33.10.11.2.1.1 | ColumnrotaryAddress | read-write | mandatory | The internet address to be recognized as a rotary. Corresponds directly to the ip-address portion of SERVER INTERNET ROTARY and the value labeled 'Internet Add… |
| 1.3.6.1.4.1.33.10.11.2.1.2 | ColumnrotaryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR SERVER INTERNET ROTARY command. It is an implem… |
| 1.3.6.1.4.1.33.10.11.2.1.3 | ColumnrotaryPortMap | read-write | mandatory | The list of character ports that compose the rotary. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the… |
| 1.3.6.1.4.1.33.10.12 | NodexEgp | |||
| 1.3.6.1.4.1.33.10.13 | Nodeospf | |||
| 1.3.6.1.4.1.33.10.14 | NoderouterIp | |||
| 1.3.6.1.4.1.33.10.15 | NoderouterUdp | |||
| 1.3.6.1.4.1.33.10.16 | NoderouterPolicy | |||
| 1.3.6.1.4.1.33.11 | Nodeethernet | |||
| 1.3.6.1.4.1.33.11.1 | TableetherTable | not-accessible | mandatory | A list of generic entries. |
| 1.3.6.1.4.1.33.11.1.1 | RowetherEntry | not-accessible | mandatory | Generic status and parameter values for an Ethernet interface. |
| 1.3.6.1.4.1.33.11.1.1.1 | ColumnetherIndex | read-only | mandatory | An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.4.1.33.11.1.1.2 | ColumnetherAlignmentErrors | read-only | mandatory | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. |
| 1.3.6.1.4.1.33.11.1.1.3 | ColumnetherFCSErrors | read-only | mandatory | A count of frames received on a particular interface that are an integral number of octets in length that do not pass the FCS check. |
| 1.3.6.1.4.1.33.11.2 | TableetherTxTable | not-accessible | mandatory | A list of Ethernet transmit entries. |
| 1.3.6.1.4.1.33.11.2.1 | RowetherTxEntry | not-accessible | mandatory | Transmit status and parameter values for an Ethernet interface. |
| 1.3.6.1.4.1.33.11.2.1.1 | ColumnetherTxIndex | read-only | mandatory | An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.4.1.33.11.2.1.2 | ColumnetherTxSingleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.4.1.33.11.2.1.3 | ColumnetherTxMultipleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.33.11.3 | TableetherMulticastTable | not-accessible | mandatory | A list of etherMulticast entries. |
| 1.3.6.1.4.1.33.11.3.1 | RowetherMulticastEntry | not-accessible | mandatory | EtherMulticast status and parameter values for an Ethernet interface. |
| 1.3.6.1.4.1.33.11.3.1.1 | ColumnetherMulticastIndex | read-only | mandatory | An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.4.1.33.11.3.1.2 | ColumnetherMulticastBytesIn | read-only | mandatory | A count of frames successfully received on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an ins… |
| 1.3.6.1.4.1.33.11.3.1.3 | ColumnetherMulticastBytesOut | read-only | mandatory | A count of successfully frames successfully transmitted on a particular interface and for which the destination address multicast bit was set. Bytes that are c… |
| 1.3.6.1.4.1.33.11.4 | TableetherXTxTable | not-accessible | mandatory | A list of Ethernet extended transmit entries. |
| 1.3.6.1.4.1.33.11.4.1 | RowetherXTxEntry | not-accessible | mandatory | Extended transmit status and parameter values for an Ethernet interface. |
| 1.3.6.1.4.1.33.11.4.1.1 | ColumnetherXTxIndex | read-only | mandatory | An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified… |
| 1.3.6.1.4.1.33.11.4.1.2 | ColumnetherXTxExcessiveCollisions | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.4.1.33.12 | NodebootClient | |||
| 1.3.6.1.4.1.33.12.1 | ScalarbootClientStatus | read-only | mandatory | The overall status of the bootstrapping operation, including, for example, what is presently happening and error information. |
| 1.3.6.1.4.1.33.13 | Nodecharacter | |||
| 1.3.6.1.4.1.33.13.1 | Nodebasic | |||
| 1.3.6.1.4.1.33.13.1.1 | ScalarbasicBroadcast | read-write | mandatory | Control for user ability to broadcast messages to other local ports. Corresponds directly to SERVER BROADCAST and the presence of the label 'Broadcast' followi… |
| 1.3.6.1.4.1.33.13.1.2 | ScalarbasicErrorReport | read-write | mandatory | Control for server display of an error when the user gives an unsupported command. Corresponds directly to SERVER REPORT ERRORS and the presence of the label '… |
| 1.3.6.1.4.1.33.13.1.3 | ScalarbasicLock | read-write | mandatory | Control for user ability to use a password to protect a logged in terminal from other users. Corresponds directly to SERVER LOCK and the presence of the label … |
| 1.3.6.1.4.1.33.13.1.4 | ScalarbasicInactivityTimer | read-write | mandatory | Number of minutes a terminal may remain logged in with no sessions, no input or output, and no modem transitions. Corresponds directly to SERVER INACTIVITY TIM… |
| 1.3.6.1.4.1.33.13.1.5 | ScalarbasicPasswordRetryLimit | read-write | mandatory | Number of times the server allows a user to retry an incorrect password. Corresponds directly to SERVER PASSWORD LIMIT and the value labeled 'Password Limit:' … |
| 1.3.6.1.4.1.33.13.1.6 | ScalarbasicPrivilegedPassword | read-write | mandatory | The password a user must enter to become privileged. For security reasons, reading this object always returns a zero-length value. Corresponds directly to SERV… |
| 1.3.6.1.4.1.33.13.1.7 | ScalarbasicLoginPassword | read-write | mandatory | The password a user must enter to be given the opportunity to log in. For security reasons, reading this object always returns a zero-length value. Corresponds… |
| 1.3.6.1.4.1.33.13.1.8 | ScalarbasicLoginPrompt | read-write | mandatory | The text string the server displays to prompt a user for the login password. Corresponds directly to SERVER LOGIN PROMPT. |
| 1.3.6.1.4.1.33.13.1.9 | ScalarbasicWelcome | read-write | mandatory | The text string the server displays before attempting to log in a user. Corresponds directly to SERVER WELCOME and the value labeled 'Welcome:' in the SERVER C… |
| 1.3.6.1.4.1.33.13.1.10 | ScalarbasicActivePorts | read-only | mandatory | The number of ports with connected sessions or logged in users. Corresponds directly to the value labeled 'Active Ports:' and 'Cur' in the SERVER STATUS displa… |
| 1.3.6.1.4.1.33.13.1.11 | ScalarbasicActivePortsHigh | read-only | mandatory | The highest value of basicActivePorts since system initialization. Corresponds directly to the value labeled 'Active Ports:' and 'High' in the SERVER STATUS di… |
| 1.3.6.1.4.1.33.13.1.12 | ScalarbasicActiveUsers | read-only | mandatory | The number of logged in users. Corresponds directly to the value labeled 'Active Users:' and 'Cur' in the SERVER STATUS display. |
| 1.3.6.1.4.1.33.13.1.13 | ScalarbasicActiveUsersHigh | read-only | mandatory | The highest value of basicActiveUsers since system initialization. Corresponds directly to the value labeled 'Active Users:' and 'High' in the SERVER STATUS di… |
| 1.3.6.1.4.1.33.13.1.14 | ScalarbasicSessions | read-only | mandatory | The total number of connected sessions. Corresponds directly to the value labeled 'Connected Sessions:' and 'Cur' in the SERVER STATUS display. |
| 1.3.6.1.4.1.33.13.1.15 | ScalarbasicSessionsHigh | read-only | mandatory | The highest value of basicSessions since system initialization. Corresponds directly to the value labeled 'Connected Sessions:' and 'High' in the SERVER STATUS… |
| 1.3.6.1.4.1.33.13.1.16 | ScalarbasicSessionsLimit | read-write | mandatory | The maximum total number of sessions that can simultaneously be connected to the system. A value of -1 indicates no limit up to available dynamic system memory… |
| 1.3.6.1.4.1.33.13.1.17 | TablebasicPortTable | not-accessible | mandatory | A list of basic character port entries. |
| 1.3.6.1.4.1.33.13.1.17.1 | RowbasicPortEntry | not-accessible | mandatory | Basic parameter values for a port. |
| 1.3.6.1.4.1.33.13.1.17.1.1 | ColumnbasicPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.13.1.17.1.2 | ColumnbasicPortDefaultDestAction | read-write | mandatory | The action to take relative to basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the label 'Dedicated/Preferred Service:' … |
| 1.3.6.1.4.1.33.13.1.17.1.3 | ColumnbasicPortDefaultDestProtocol | read-write | mandatory | The session protocol to use with basicPortDefaultDestName. Corresponds directly to LAT/TELNET PORT DEDICATED/PREFERRED SERVICE. |
| 1.3.6.1.4.1.33.13.1.17.1.4 | ColumnbasicPortDefaultDestName | read-write | mandatory | The default name to use in forming a connection when no other name is specified. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the value labeled… |
| 1.3.6.1.4.1.33.13.1.17.1.5 | ColumnbasicPortDefaultDestLATNodeName | read-write | mandatory | A LAT node name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the value labeled 'Node:' following the… |
| 1.3.6.1.4.1.33.13.1.17.1.6 | ColumnbasicPortDefaultDestLATPortName | read-write | mandatory | A LAT port name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the value labeled 'Node:' following the… |
| 1.3.6.1.4.1.33.13.1.17.1.7 | ColumnbasicPortAutoConnect | read-write | mandatory | Control for automatic session connection. Corresponds directly to PORT AUTOCONNECT and the presence of the label 'Autoconnect' following the label 'Enabled Cha… |
| 1.3.6.1.4.1.33.13.1.17.1.8 | ColumnbasicPortAutoLogin | read-write | mandatory | Control for automatic port login. Corresponds directly to PORT AUTODEDICATED and the presence of the label 'Autodedicated' following the label 'Enabled Charact… |
| 1.3.6.1.4.1.33.13.1.17.1.9 | ColumnbasicPortBroadcast | read-write | mandatory | Control for display of messages sent by users on other ports. Corresponds directly to PORT BROADCAST and the presence of the label 'Broadcast' following the la… |
| 1.3.6.1.4.1.33.13.1.17.1.10 | ColumnbasicPortConnectResume | read-write | mandatory | Control for behavior of a connection attempt to a destination where the port already has a connection. 'disabled' causes a new connection. 'enabled' causes the… |
| 1.3.6.1.4.1.33.13.1.17.1.11 | ColumnbasicPortDialup | read-write | mandatory | Defines whether the port should be considered as connected to a dialup line. 'enabled' means that it is. Corresponds directly to PORT DIALUP and the presence o… |
| 1.3.6.1.4.1.33.13.1.17.1.12 | ColumnbasicPortIdleTimeout | read-write | mandatory | The number of minutes the system will allow a session to have no activity before automatically disconnecting it. A value of -1 indicates no timeout. Zero is no… |
| 1.3.6.1.4.1.33.13.1.17.1.13 | ColumnbasicPortInactivityLogout | read-write | mandatory | Control for the system automatically logging the port out when it has no sessions, no local activity, and no modem signal changes for the time period specified… |
| 1.3.6.1.4.1.33.13.1.17.1.14 | ColumnbasicPortLossNotification | read-write | mandatory | Control for the system sending a Bell character to the port when it looses an input character due to an overrun or data error. Corresponds directly to PORT LOS… |
| 1.3.6.1.4.1.33.13.1.17.1.15 | ColumnbasicPortMessageCodes | read-write | mandatory | Control for including error numbers in error messages displayed on the port. Corresponds directly to PORT MESSAGE CODES and the presence of the label 'Message … |
| 1.3.6.1.4.1.33.13.1.17.1.16 | ColumnbasicPortMultisessions | read-write | mandatory | Control for running the multisession line protocol between the port and the locally-connected terminal. Corresponds directly to PORT MULTISESSIONS and the pres… |
| 1.3.6.1.4.1.33.13.1.17.1.17 | ColumnbasicPortDefaultUserName | read-write | mandatory | Default user name to use for automatically logging in the port. Corresponds directly to PORT USERNAME and the value labeled 'Port n:' in the PORT CHARACTERISTI… |
| 1.3.6.1.4.1.33.13.1.17.1.18 | ColumnbasicPortVerification | read-write | mandatory | Control for display of informational messages on the port when the user connects, disconnects, or switches a session. Corresponds directly to PORT VERIFICATION… |
| 1.3.6.1.4.1.33.13.1.17.1.19 | ColumnbasicPortDefaultProtocol | read-write | mandatory | The session protocol to use when not otherwise specified. Corresponds directly to PORT RESOLVE SERVICE and the value labeled 'Resolve Service:' in the PORT ALT… |
| 1.3.6.1.4.1.33.13.1.17.1.20 | ColumnbasicPortLogins | read-only | mandatory | The number of logins on the port since system initialization. Corresponds directly to the value labeled 'Local Accesses:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.13.1.17.1.21 | ColumnbasicPortRemoteSessions | read-only | mandatory | The number of remotely originating sessions to the port since system initialization. Corresponds directly to the value labeled 'Remote Accesses:' in the PORT C… |
| 1.3.6.1.4.1.33.13.1.17.1.22 | ColumnbasicPortIdleTimeouts | read-only | mandatory | The number of session disconnects due to expiration of basicPortIdleTimeout. Corresponds directly to the value labeled 'Idle Timeouts:' in the PORT COUNTERS di… |
| 1.3.6.1.4.1.33.13.1.17.1.23 | ColumnbasicPortStatus | read-only | mandatory | The current operational status of the port. Corresponds directly to the value labeled 'Status:' in the PORT STATUS display. |
| 1.3.6.1.4.1.33.13.1.17.1.24 | ColumnbasicPortLastInCharacter | read-only | mandatory | The character that most recently came into the port. Corresponds directly to the value labeled 'Last Char Input:' in the PORT STATUS display. |
| 1.3.6.1.4.1.33.13.1.17.1.25 | ColumnbasicPortLastOutCharacter | read-only | mandatory | The character that most recently went out of the port. Corresponds directly to the value labeled 'Last Char Output:' in the PORT STATUS display. |
| 1.3.6.1.4.1.33.13.1.17.1.26 | ColumnbasicPortActiveUserName | read-only | mandatory | The user name currently logged into the port. Corresponds directly to the value by the port number and labeled 'Username' in the USERS display. |
| 1.3.6.1.4.1.33.13.1.17.1.27 | ColumnbasicPortDefaultSessionMode | read-write | mandatory | Data recognition mode when starting a session, with the following meanings: interactive locally recognize all controls binary recognize only session protocol (… |
| 1.3.6.1.4.1.33.13.1.17.1.28 | ColumnbasicPortZero | read-write | mandatory | Control to zero counters for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to … |
| 1.3.6.1.4.1.33.13.1.17.1.29 | ColumnbasicPortZeroTime | read-only | mandatory | The number of hundredths of a second since the most recent zeroing of the port's counters, such as through execution of basicPortZero. Corresponds directly to … |
| 1.3.6.1.4.1.33.13.1.18 | TablebasicSerialPortTable | not-accessible | mandatory | A list of basic character serial port entries. |
| 1.3.6.1.4.1.33.13.1.18.1 | RowbasicSerialPortEntry | not-accessible | mandatory | Basic parameter values for a serial port. |
| 1.3.6.1.4.1.33.13.1.18.1.1 | ColumnbasicSerialPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.13.1.18.1.2 | ColumnbasicSerialPortBreak | read-write | mandatory | Action to take on a BREAK condition from the port. Corresponds directly to PORT BREAK and the value labeled 'Break:' in the PORT CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.13.1.18.1.3 | ColumnbasicSerialPortInterrupts | read-write | mandatory | Control for recognizing BREAK or local switch to interrupt a session. Corresponds directly to PORT INTERRUPTS and the presence of the label 'Interrupts' follow… |
| 1.3.6.1.4.1.33.13.1.18.1.4 | ColumnbasicSerialPortNoLoss | read-write | mandatory | Control for storing port input locally in anticipation of session startup. Corresponds directly to PORT NOLOSS and the presence of the label 'Noloss' following… |
| 1.3.6.1.4.1.33.13.1.18.1.5 | ColumnbasicSerialPortPause | read-write | mandatory | Control for pausing after each screenful of locally-originated output to the port. Corresponds directly to PORT PAUSE and the presence of the label 'Pause' fol… |
| 1.3.6.1.4.1.33.13.1.18.1.6 | ColumnbasicSerialPortPrompt | read-write | mandatory | Prompt for the system to use on the port. Corresponds directly to PORT PROMPT and the value labeled 'Prompt:' in the PORT ALTERNATE CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.13.1.18.1.7 | ColumnbasicSerialPortTerminalType | read-write | mandatory | Type of terminal attached to the port, for formatting local output. Corresponds directly to PORT TYPE and the value labeled 'Type:' in the PORT CHARACTERISTICS… |
| 1.3.6.1.4.1.33.13.1.18.1.8 | ColumnbasicSerialPortTypeaheadLimit | read-write | mandatory | Maximum number of input characters to hold pending tranmission on a session. Corresponds directly to PORT TYPEAHEAD SIZE and the value labeled 'Typeahead Size:… |
| 1.3.6.1.4.1.33.13.1.18.1.9 | ColumnbasicSerialPortBackwardSwitch | read-write | mandatory | Character input from the character port to cause a switch to the previous, lower numbered session. The value 0 indicates no character has this effect. Correspo… |
| 1.3.6.1.4.1.33.13.1.18.1.10 | ColumnbasicSerialPortForwardSwitch | read-write | mandatory | Character input from the character port to cause a switch to the next, higher numbered session. The value 0 indicates no character has this effect. Corresponds… |
| 1.3.6.1.4.1.33.13.1.18.1.11 | ColumnbasicSerialPortLocalSwitch | read-write | mandatory | Character input from the character port to cause a switch to local command mode. The value 0 indicates no character has this effect. Corresponds directly to PO… |
| 1.3.6.1.4.1.33.13.1.18.1.12 | ColumnbasicSerialPortModemControl | read-write | mandatory | Control for observing hardware modem control signals. Corresponds directly to PORT MODEM CONTROL and the value labeled 'Modem Control:' in the PORT CHARACTERIS… |
| 1.3.6.1.4.1.33.13.1.18.1.13 | ColumnbasicSerialPortSignalCheck | read-write | mandatory | Control for observing DSR and DCD to bound allowing sessions. Corresponds directly to PORT SIGNAL CHECK and the presence of the label 'Signal Check' following … |
| 1.3.6.1.4.1.33.13.1.18.1.14 | ColumnbasicSerialPortDSRLogout | read-write | mandatory | Control for logging out the port when DCD is deasserted. Corresponds directly to PORT DSRLOGOUT and the presence of the label 'DSRlogout' following the label '… |
| 1.3.6.1.4.1.33.13.1.18.1.15 | ColumnbasicSerialPortDSRObserve | read-write | mandatory | Control for beginning the login sequence on the port when DCD is asserted. Corresponds directly to PORT DSRWAIT and the presence of the label 'DSRwait' followi… |
| 1.3.6.1.4.1.33.13.1.18.1.16 | ColumnbasicSerialPortDCDTimeout | read-write | mandatory | The number of milleseconds that DCD may be asserted before disconnecting the port. Corresponds directly to PORT DCD TIMEOUT and the value labeled 'DCD Timeout:… |
| 1.3.6.1.4.1.33.13.1.18.1.17 | ColumnbasicSerialPortDTRAssert | read-write | mandatory | Control when the system asserts DTR on the port. always unconditional(DISABLED) onConnectionOrRing connection formed or RING asserted(ENABLED) onConnection con… |
| 1.3.6.1.4.1.33.13.1.18.1.18 | ColumnbasicSerialPortLimitedCommands | read-write | mandatory | Control for limiting the commands available to the user on the port. Corresponds directly to PORT SECURITY and the presence of the label 'Security' following t… |
| 1.3.6.1.4.1.33.13.1.18.1.19 | ColumnbasicSerialPortLimitedView | read-write | mandatory | Control for restricting what a user may display. Corresponds directly to PORT LIMITED VIEW and the presence of the label 'Limited View' following the label 'En… |
| 1.3.6.1.4.1.33.13.1.18.1.20 | ColumnbasicSerialPortPassword | read-write | mandatory | Control for requiring the user to supply the login password to log in on the port. Corresponds directly to PORT PASSWORD and the presence of the label 'Passwor… |
| 1.3.6.1.4.1.33.13.1.18.1.21 | ColumnbasicSerialPortLineEditor | read-write | mandatory | Control for allowing the user to use local mode command line editing. Corresponds directly to PORT LINE EDITOR and the presence of the label 'Line Editor' foll… |
| 1.3.6.1.4.1.33.13.1.18.1.22 | ColumnbasicSerialPortLineEditorBackspace | read-write | mandatory | Character input from the character port to move the cursor to the left. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE E… |
| 1.3.6.1.4.1.33.13.1.18.1.23 | ColumnbasicSerialPortLineEditorBeginning | read-write | mandatory | Character input from the character port to move the cursor to the beginning of the line. The value 0 indicates no character has this effect. Corresponds direct… |
| 1.3.6.1.4.1.33.13.1.18.1.24 | ColumnbasicSerialPortLineEditorCancel | read-write | mandatory | Character input from the character port to cancel an interactive dialog or delete the current line. The value 0 indicates no character has this effect. Corresp… |
| 1.3.6.1.4.1.33.13.1.18.1.25 | ColumnbasicSerialPortLineEditorDeleteBeginning | read-write | mandatory | Character input from the character port to delete the current line from the cursor to the beginning. The value 0 indicates no character has this effect. Corres… |
| 1.3.6.1.4.1.33.13.1.18.1.26 | ColumnbasicSerialPortLineEditorDeleteLine | read-write | mandatory | Character input from the character port to delete the current line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITO… |
| 1.3.6.1.4.1.33.13.1.18.1.27 | ColumnbasicSerialPortLineEditorEnd | read-write | mandatory | Character input from the character port to move the cursor to the end of the line. The value 0 indicates no character has this effect. Corresponds directly to … |
| 1.3.6.1.4.1.33.13.1.18.1.28 | ColumnbasicSerialPortLineEditorForward | read-write | mandatory | Character input from the character port to move the cursor to the right. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE … |
| 1.3.6.1.4.1.33.13.1.18.1.29 | ColumnbasicSerialPortLineEditorInsertToggle | read-write | mandatory | Character input from the character port to toggle between insert and overwrite modes. The value 0 indicates no character has this effect. Corresponds directly … |
| 1.3.6.1.4.1.33.13.1.18.1.30 | ColumnbasicSerialPortLineEditorNextLine | read-write | mandatory | Character input from the character port to recall the next, newer line in the command history. The value -1 indicates no character has this effect. Corresponds… |
| 1.3.6.1.4.1.33.13.1.18.1.31 | ColumnbasicSerialPortLineEditorPreviousLine | read-write | mandatory | Character input from the character port to recall the previous, older line in the command history. The value 0 indicates no character has this effect. Correspo… |
| 1.3.6.1.4.1.33.13.1.18.1.32 | ColumnbasicSerialPortLineEditorQuotingCharacter | read-write | mandatory | Character input from the character port to inhibit interpretation of the next input character. The value 0 indicates no character has this effect. Corresponds … |
| 1.3.6.1.4.1.33.13.1.18.1.33 | ColumnbasicSerialPortLineEditorRedisplay | read-write | mandatory | Character input from the character port to redisplay the current command line. The value 0 indicates no character has this effect. Corresponds directly to PORT… |
| 1.3.6.1.4.1.33.13.1.19 | ScalarbasicConsoleLogoutDisconnect | read-write | mandatory | Control for automatic session disconnection when a console port user logs out. Corresponds directly to SERVER CONSOLE LOGOUT and the presence of the label 'Con… |
| 1.3.6.1.4.1.33.13.2 | Nodequeue | |||
| 1.3.6.1.4.1.33.13.2.1 | ScalarqueueLimit | read-write | mandatory | The maximum number of entries that can be made in the Queue table. The value -1 indicates the imit is available memory. Corresponds directly to SERVER QUEUE LI… |
| 1.3.6.1.4.1.33.13.2.2 | ScalarqueueHigh | read-only | mandatory | The highest value of queueNumber since system initialization. Corresponds directly to the value labeled 'Queue Entries' and 'High' in the SERVER STATUS display. |
| 1.3.6.1.4.1.33.13.2.3 | ScalarqueueNumber | read-only | mandatory | The number of entries in the Queue table. Corresponds directly to the value labeled 'Queue Entries' and 'Cur' in the SERVER STATUS display. |
| 1.3.6.1.4.1.33.13.2.4 | TablequeueTable | not-accessible | mandatory | A list of queue entries. |
| 1.3.6.1.4.1.33.13.2.4.1 | RowqueueEntry | not-accessible | mandatory | Parameter values for a queue entry. |
| 1.3.6.1.4.1.33.13.2.4.1.1 | ColumnqueueJob | read-only | mandatory | The job number of a queued request. Corresponds directly to the value labeled 'Entry' in the QUEUE display. |
| 1.3.6.1.4.1.33.13.2.4.1.2 | ColumnqueueStatus | read-write | mandatory | The status of a queue entry. Set to 'invalid' to remove the entry, which corresponds directly to the REMOVE QUEUE ENTRY command. Actual removal of the entry is… |
| 1.3.6.1.4.1.33.13.2.4.1.3 | ColumnqueueSourceName | read-only | mandatory | The name of the system that originated the queue entry. Corresponds directly to the value labeled 'Source Node' in the QUEUE display. |
| 1.3.6.1.4.1.33.13.2.4.1.4 | ColumnqueueServiceName | read-only | mandatory | The name of the service for which the originator is waiting. Corresponds directly to the value labeled 'Service' in the QUEUE display. |
| 1.3.6.1.4.1.33.13.2.4.1.5 | ColumnqueueServicePortIndex | read-only | mandatory | The charPortIndex of the port for which the originator is waiting, if supplied by the originator. As defined in the Character MIB [12]. Corresponds indirectly … |
| 1.3.6.1.4.1.33.13.2.4.1.6 | ColumnqueueServicePortName | read-only | mandatory | The name of the port for which the originator is waiting, if supplied by the originator. Corresponds directly to the port name part of the value labeled 'Port … |
| 1.3.6.1.4.1.33.13.2.5 | TablequeuePortTable | not-accessible | mandatory | A list of queuing-related character port entries. |
| 1.3.6.1.4.1.33.13.2.5.1 | RowqueuePortEntry | not-accessible | mandatory | Queuing parameter values for a port. |
| 1.3.6.1.4.1.33.13.2.5.1.1 | ColumnqueuePortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.13.2.5.1.2 | ColumnqueuePortQueuing | read-write | mandatory | Control for allowing queued requests for using the port. Corresponds directly to PORT QUEUING and the presence of the label 'Queuing' following the label 'Enab… |
| 1.3.6.1.4.1.33.13.3 | Nodemenu | |||
| 1.3.6.1.4.1.33.13.3.1 | ScalarmenuNumber | read-only | mandatory | The number of entries in the Menu table. Corresponds indirectly to SERVER MENU display. |
| 1.3.6.1.4.1.33.13.3.2 | ScalarmenuContinuePrompt | read-write | mandatory | The text to use when prompting a menu user to press RETURN to continue. Corresponds directly to SERVER MENU CONTINUE PROMPT and the value labeled 'Menu Continu… |
| 1.3.6.1.4.1.33.13.3.3 | ScalarmenuSelectionPrompt | read-write | mandatory | The text to use when prompting a menu user for a menu selection. Corresponds directly to SERVER MENU PROMPT and the value labeled 'Menu Prompt:' in the SERVER … |
| 1.3.6.1.4.1.33.13.3.4 | TablemenuTable | not-accessible | mandatory | A list of menu entries. |
| 1.3.6.1.4.1.33.13.3.4.1 | RowmenuEntry | not-accessible | mandatory | Parameter values for a menu entry. |
| 1.3.6.1.4.1.33.13.3.4.1.1 | ColumnmenuIndex | read-only | mandatory | The index number of a menu entry. Corresponds directly to the numbers down the left of the SERVER MENU display. |
| 1.3.6.1.4.1.33.13.3.4.1.2 | ColumnmenuStatus | read-write | mandatory | The status of a the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR SERVER MENU command. Actual removal of the entry is im… |
| 1.3.6.1.4.1.33.13.3.4.1.3 | ColumnmenuText | read-only | mandatory | The text to be displayed in the menu. Corresponds directly to the line next to the entry number in the SERVER MENU display. |
| 1.3.6.1.4.1.33.13.3.4.1.4 | ColumnmenuCommand | read-only | mandatory | The commands to execute when the user chooses the menu entry. Corresponds directly second line following the entry number in the SERVER MENU display. |
| 1.3.6.1.4.1.33.13.3.5 | TablemenuPortTable | not-accessible | mandatory | A list of menu-related character port entries. |
| 1.3.6.1.4.1.33.13.3.5.1 | RowmenuPortEntry | not-accessible | mandatory | Menu parameter values for a port. |
| 1.3.6.1.4.1.33.13.3.5.1.1 | ColumnmenuPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.13.3.5.1.2 | ColumnmenuPortMenuStatus | read-write | mandatory | Control for menu operation on the port. Corresponds indirectly to PORT MENU and PORT PRIVILEGED MENU and the presence of the labels 'Menu' and 'Privileged Men'… |
| 1.3.6.1.4.1.33.13.4 | NodenetLogin | |||
| 1.3.6.1.4.1.33.13.4.1 | ScalarnetLoginNumber | read-only | mandatory | The number of entries in the Network Login Server table. |
| 1.3.6.1.4.1.33.13.4.2 | TablenetLoginServerTable | not-accessible | mandatory | A list of network login server entries. |
| 1.3.6.1.4.1.33.13.4.2.1 | RownetLoginServerEntry | not-accessible | mandatory | Network login parameter values for a server entry. |
| 1.3.6.1.4.1.33.13.4.2.1.1 | ColumnnetLoginServerName | read-write | mandatory | The name of a network login server, suitable for resolution to a network address. Corresponds directly to host portion of SERVER SCRIPT SERVER and the value la… |
| 1.3.6.1.4.1.33.13.4.2.1.2 | ColumnnetLoginServerStatus | read-write | mandatory | Status of this entry. Set to 'invalid'to remove the entry, which corresponds directly to the CLEAR SERVER SCRIPT SERVER command. Acutal removal of the entry is… |
| 1.3.6.1.4.1.33.13.4.2.1.3 | ColumnnetLoginServerPath | read-write | mandatory | The full path name to the script file that is identified by the user name. Corresponds directly to path portion of SERVER SCRIPT SERVER and the value labeled '… |
| 1.3.6.1.4.1.33.13.4.3 | TablenetLoginPortTable | not-accessible | mandatory | A list of network login character port entries. |
| 1.3.6.1.4.1.33.13.4.3.1 | RownetLoginPortEntry | not-accessible | mandatory | Network login parameter values for a port. |
| 1.3.6.1.4.1.33.13.4.3.1.1 | ColumnnetLoginPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.13.4.3.1.2 | ColumnnetLoginPortScriptUse | read-write | mandatory | Control for the script action taken when a user logs in on the port. Corresponds directly to PORT SCRIPT LOGIN and the value labeled 'Script Login:' in the POR… |
| 1.3.6.1.4.1.33.13.4.3.1.3 | ColumnnetLoginPortScriptEcho | read-write | mandatory | Control for display of script operation on the port when running a script. Corresponds directly to PORT SCRIPT ECHO and the presence of the label 'Script Echo'… |
| 1.3.6.1.4.1.33.13.4.3.1.4 | ColumnnetLoginPortLoaderAddressType | read-only | mandatory | The type of network address contained in netLoginPortLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip… |
| 1.3.6.1.4.1.33.13.4.3.1.5 | ColumnnetLoginPortLoaderAddress | read-only | mandatory | The network address of the server that provided the script for the current port login. Corresponds directly the address part of the value labeled 'Script Loade… |
| 1.3.6.1.4.1.33.13.4.3.1.6 | ColumnnetLoginPortLoaderFile | read-only | mandatory | The path and file name of the script used for the current port login. Corresponds directly the file name part of the value labeled 'Script Loaded From:' in the… |
| 1.3.6.1.4.1.33.13.5 | Nodedial | |||
| 1.3.6.1.4.1.33.13.5.1 | TabledialPortTable | not-accessible | mandatory | A list of dial character port entries. |
| 1.3.6.1.4.1.33.13.5.1.1 | RowdialPortEntry | not-accessible | mandatory | Dial parameter values for a port. |
| 1.3.6.1.4.1.33.13.5.1.1.1 | ColumndialPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.13.5.1.1.2 | ColumndialPortDialback | read-write | mandatory | Control for use of dialback when a user logs in on the port. Corresponds directly to PORT DIALBACK and the presence of the label 'Dialback' following the label… |
| 1.3.6.1.4.1.33.13.5.1.1.3 | ColumndialPortDialbackTimeout | read-write | mandatory | The number of seconds to wait for remote modem response when dialing back. Corresponds directly to PORT DIALBACK TIMEOUT and the value labeled 'Dialback Timeou… |
| 1.3.6.1.4.1.33.13.6 | NodesessionLog | |||
| 1.3.6.1.4.1.33.13.6.1 | ScalarsessionLogLimit | read-write | mandatory | The maximum number of entries allowed in the Session Log table. Corresponds directly to SERVER ACCOUNTING ENTRIES and the value labeled 'Accounting Entries:' i… |
| 1.3.6.1.4.1.33.13.6.2 | TablesessionLogTable | not-accessible | mandatory | A list of session log entries. |
| 1.3.6.1.4.1.33.13.6.2.1 | RowsessionLogEntry | not-accessible | mandatory | Parameter values for a session log entry. |
| 1.3.6.1.4.1.33.13.6.2.1.1 | ColumnsessionLogIndex | read-only | mandatory | The index number of a session log entry. Corresponds directly to the order of the displayed records in the SERVER ACCOUNTING display. The maximum value is sess… |
| 1.3.6.1.4.1.33.13.6.2.1.2 | ColumnsessionLogConnectionID | read-only | mandatory | An indentifying number for records relating to the same connection, that is, the connect and disconnect records, either of which can be missing. Corresponds di… |
| 1.3.6.1.4.1.33.13.6.2.1.3 | ColumnsessionLogPort | read-only | mandatory | An index value that uniquely identifies the port where the event took place. The port identified by a particular value of this index is the same port as identi… |
| 1.3.6.1.4.1.33.13.6.2.1.4 | ColumnsessionLogEvent | read-only | mandatory | The type of event. Corresponds directly to the alphabetic part of the value labeled 'Type' in the SERVER ACCOUNTING display. |
| 1.3.6.1.4.1.33.13.6.2.1.5 | ColumnsessionLogEventDetail | read-only | mandatory | The detailed reason for the event. Corresponds directly to the numeric part of the value labeled 'Type' in the SERVER ACCOUNTING display. |
| 1.3.6.1.4.1.33.13.6.2.1.6 | ColumnsessionLogUserName | read-only | mandatory | The user name logged in on the port when the event occurred. Corresponds directly to the value labeled 'Username' in the SERVER ACCOUNTING display. |
| 1.3.6.1.4.1.33.13.6.2.1.7 | ColumnsessionLogRemoteName | read-only | mandatory | The name of the session remote partner. Corresponds directly to the value labeled 'Destination' in the SERVER ACCOUNTING display. |
| 1.3.6.1.4.1.33.13.6.2.1.8 | ColumnsessionLogConnectTime | read-only | mandatory | The date and time that session connection occurred. Corresponds directly to the value labeled 'Connect Time' in the SERVER ACCOUNTING display. |
| 1.3.6.1.4.1.33.13.6.2.1.9 | ColumnsessionLogDisconnectTime | read-only | mandatory | The date and time that session disconnection occurred. Corresponds directly to the value labeled 'Disconnect Time' in the SERVER ACCOUNTING display. |
| 1.3.6.1.4.1.33.13.6.2.1.10 | ColumnsessionLogInCharacters | read-only | mandatory | The number of characters that came into the port for the session. Corresponds directly to the value labeled 'Bytes In' in the SERVER ACCOUNTING display. |
| 1.3.6.1.4.1.33.13.6.2.1.11 | ColumnsessionLogOutCharacters | read-only | mandatory | The number of characters that went out of the port for the session. Corresponds directly to the value labeled 'Bytes Out' in the SERVER ACCOUNTING display. |
| 1.3.6.1.4.1.33.14 | Nodedecnet | |||
| 1.3.6.1.4.1.33.14.1 | Nodercp | |||
| 1.3.6.1.4.1.33.14.1.1 | ScalarrcpRemoteAddress | read-only | mandatory | If a remote console session exists, the Ethernet address of the remote partner, otherwise zero length. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AddressType | INTEGER { unknown(1), other(2), local(3), ip(4), ethernet(5) } | ||
| AutonomousType | OBJECT IDENTIFIER | ||
| DateTime | OCTET STRING (SIZE (8)) | ||
| DisplayString | OCTET STRING | ||
| InstancePointer | OBJECT IDENTIFIER | ||
| PhysAddress | OCTET STRING |