ZHNLANDEVICE
195 objects
This file defines the private Enterprise MIB extensions that define LAN ethernet interface related objects supported by the Zhone CPEs.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| ZHNLAYER2BRIDGING | VlanTypeValues |
| Zhone | zhoneWtn |
| Zhone-TC | ZhoneRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.2.5.41 | IdentityzhnLANDevice | This file defines the private Enterprise MIB extensions that define LAN ethernet interface related objects supported by the Zhone CPEs. | ||
| 1.3.6.1.4.1.5504.2.5.41.1 | NodezhnLANDeviceObjects | |||
| 1.3.6.1.4.1.5504.2.5.41.1.1 | TablelanDeviceTable | not-accessible | current | Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces |
| 1.3.6.1.4.1.5504.2.5.41.1.1.1 | RowlanDeviceEntry | not-accessible | current | Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces. Each instance contains all LAN-related objects for a given bridged subnet. |
| 1.3.6.1.4.1.5504.2.5.41.1.1.1.1 | ColumnlanDeviceIndex | not-accessible | current | LAN Device ifIndex |
| 1.3.6.1.4.1.5504.2.5.41.1.1.1.2 | ColumnlanEthernetInterfaceNumberOfEntries | read-only | current | Number of instances of lanEthernetInterfaceConfig entries for this LAN device. |
| 1.3.6.1.4.1.5504.2.5.41.1.1.1.3 | ColumnlanUSBInterfaceNumberOfEntries | read-only | current | Number of instances of lanUSBInterfaceConfig entries for this LAN device. |
| 1.3.6.1.4.1.5504.2.5.41.1.1.1.4 | ColumnlanWLANConfigurationNumberOfEntries | read-only | current | Number of instances of lanWLANInterfaceConfig entries for this LAN device. |
| 1.3.6.1.4.1.5504.2.5.41.1.1.1.5 | ColumnlanMocaInterfaceNumberOfEntries | read-only | current | Number of instances of lanMocaInterfaceConfig entries for this LAN device. |
| 1.3.6.1.4.1.5504.2.5.41.1.2 | TableigmpSnoopingCfgTable | not-accessible | current | Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces |
| 1.3.6.1.4.1.5504.2.5.41.1.2.1 | RowigmpSnoopingCfgEntry | not-accessible | current | Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces. |
| 1.3.6.1.4.1.5504.2.5.41.1.2.1.1 | ColumnigmpEnable | read-write | current | Enables or disables IGMP snooping for the LAN device. |
| 1.3.6.1.4.1.5504.2.5.41.1.2.1.2 | ColumnigmpMode | read-write | current | IGMP Snooping mode. Enumeration of: Standard Blocking |
| 1.3.6.1.4.1.5504.2.5.41.1.2.1.3 | ColumnigmpIfName | read-only | current | The interface name for this LAN device. This object has the same value as the ipInterfaceifName object in the ipInterfaceTable and is included within the IGMP … |
| 1.3.6.1.4.1.5504.2.5.41.1.3 | NodelanHostConfigManagementObjects | |||
| 1.3.6.1.4.1.5504.2.5.41.1.3.1 | TablelanHostConfigManagementTable | not-accessible | current | Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1 | RowlanHostConfigManagementEntry | not-accessible | current | Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.1 | ColumndhcpServerConfigurable | read-write | current | Enables the configuration of the DHCP server on the LAN interface If this variable is set to false, the CPE should restore its default DHCP server settings. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.2 | ColumnzhnDhcpServerEnable | read-write | current | Enables or disables the DHCP server on the LAN interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.3 | ColumndhcpRelay | read-only | current | Indicates if the DHCP server performs the role of a server or a relay on the LAN interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.4 | ColumndhcpRelayServer | read-write | current | DHCP Relay Server IP Address. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.5 | ColumnminAddress | read-write | current | Specifies first address in the pool to be assigned by the DHCP server on the LAN interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.6 | ColumnmaxAddress | read-write | current | Specifies last address in the pool to be assigned by the DHCP server on the LAN interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.7 | ColumnreservedAddresses | read-write | current | Comma separated list of addresses marked reserved from the address allocation pool. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.8 | ColumnsubnetMask | read-write | current | DHCP client subnet mask |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.9 | ColumndnsServers | read-write | current | Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.10 | ColumndomainName | read-write | current | Sets the domain name to provide to clients on the LAN interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.11 | ColumnipRouters | read-write | current | Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.12 | ColumndhcpLeaseTime | read-write | current | Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.13 | ColumnipInterfaceNumberOfEntries | read-only | current | Number of IP interface at LAN side of the CPE. 1 is a typical value for CPE not supporting Multihomed interfaces. Support for more than one interface instance … |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2 | NodeipInterfaceObjects | |||
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1 | TablezhnIpInterfaceTable | not-accessible | current | IP interface table. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1 | RowzhnIpInterfaceEntry | not-accessible | current | IP interface table. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.1 | ColumnipInterfaceIndex | not-accessible | current | LAN IP Address Index |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.2 | ColumnipInterfaceEnable | read-only | current | Enables or disables this entry. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.3 | ColumnipInterfaceIPAddress | read-write | current | IP address of the LAN-side interface of the CPE. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.4 | ColumnipInterfaceSubnetMask | read-write | current | Subnet mask of the LAN-side interface of the CPE. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.5 | ColumnipInterfaceAddressingType | read-write | current | Represents the addressing method used to assign the LAN-side IP address of the CPE on this interface of the CPE. Enumeration of: DHCP Static Auto-IP |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.6 | ColumnipInterfaceifName | read-only | current | The interface name for this LAN device. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.7 | ColumnfirewallEnabled | read-write | current | Indicates if a stateful firewall is enabled for all traffic from this IP interface to the modem. If TRUE, all inbound local traffic (from LAN to modem) that is… |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.8 | ColumndefaultGateway | read-write | current | The IP address of the default gateway for this IP interface. This parameter is configurable only if the AddressingType is Static. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.9 | ColumnnatEnabled | read-write | current | This parameter enables or disables NAT for this IP interface. This parameter is configurable only if this interface is on an uplink port. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.10 | ColumndhcpcPid | read-only | current | If the address type is DHCP, then we will start a DHCP client to get the IP address for this IP interface. The process ID (pid) is stored in this field. A pid … |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.11 | ColumndnsType | read-write | current | This object specifies the DNS mode for this IP interface. The DNS associates hostname-to-IP address, and so domain names and IP addresses can be used interchan… |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.12 | ColumnprimaryDnsIPAddress | read-write | current | The DNS server primary IP address. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.13 | ColumnsecondaryDnsIPAddress | read-write | current | The DNS server secondary IP address. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.14 | ColumnzhnVlanType | read-write | current | This object specifies the VLAN connection type of the interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.15 | ColumnconnectionType | read-write | current | This object specifies the connection type of the interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.16 | ColumnmaxMTUSize | read-write | current | The maximum size of IP packet that can be transmitted without fragmentation - including IP headers but excluding headers from lower levels in the protocol stac… |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.17 | ColumnalternateWanIfName | read-write | current | Name of a different VLAN WAN interface to run on if the current VLAN WAN interface is set to unconfigured. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.18 | ColumnnaptEnabled | read-write | current | This parameter enables or disables NAPT for this IP interface. This parameter is configurable only if this interface is on an uplink port. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2 | NodepppoeConfigObjects | |||
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1 | TablepppoeConfigTable | not-accessible | current | PPPoE configuration interface table for LAN interfaces. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1 | RowpppoeConfigEntry | not-accessible | current | PPPoE configuration table entry. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.1 | ColumnpppoeIfName | read-only | current | The interface name for this LAN device. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.2 | Columnpid | read-only | current | This object holds the process id (pid) of the pppd associated with this connection. A pid of 0 indicates that there is no pppd running. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.3 | ColumnconnectionRequest | read-write | current | This object is used to bring up or down a PPPoE connection. Enumeration of: None Down Up Connect Disconnect |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.4 | Columnusername | read-write | current | PPP requires that you have a user name and password to establish your connection. This object is the login user name to be used for PPP authentication. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.5 | Columnpassword | read-write | current | PPP requires that you have a user name and password to establish your connection. This object is the login password to be used for PPP authentication. When rea… |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.6 | Columnauthentication | read-write | current | This object is the PPP authentication protocol to be used for PPP authentication. Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.7 | ColumnserviceName | read-write | current | This object is the PPP Service Name. It should be filled only if specified by the provider. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.8 | ColumnencryptionProtocol | read-write | current | This object describes the PPP encryption protocol. Enumeration of: None MPPE |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.9 | ColumncompressionProtocol | read-write | current | This object describes the PPP compression protocol used between the WAN device and the ISP POP. Enumeration of: None VanJacobsen STAC-LZS |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.10 | ColumnidleDisconnectTime | read-write | current | The time in seconds that if the connection remains idle, the CPE automatically terminates the connection. A value of 0 (zero) indicates that the connection is … |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.11 | ColumnholdOffTime | read-write | current | Set time in seconds before retrying connection. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.12 | ColumnuseStaticIpAddress | read-write | current | If TRUE, PPPoE connection will use a static IP address. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.13 | ColumnstaticIpAddress | read-write | current | PPPoE static IP address. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.14 | ColumnenableDebug | read-write | current | Enable PPPoE debug. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.3 | NodepppoeStatusObjects | |||
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1 | TablepppoeStatusTable | not-accessible | current | PPPoE configuration interface table for LAN interfaces. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1 | RowpppoeStatusEntry | not-accessible | current | PPPoE status table entry. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.1 | ColumnconnectionStatus | read-only | current | Current status of the PPP connection. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.2 | ColumnlastConnectionError | read-only | current | The failure reason of the last PPP connection setup. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.3 | ColumnconnectionEstablishedTime | read-only | current | The last time the PPP connection was established. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.4 | ColumncurrentMTUSize | read-only | current | The current MTU in use over this connection. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.5 | Columnuptime | read-only | current | The time in seconds this connection has been up. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3 | NodezhnDhcpConditionalServingPoolObjects | |||
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1 | TablezhnDhcpConditionalServingPoolTable | not-accessible | current | A collection of configuration parameters for DHCP conditional serving. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1 | RowzhnDhcpConditionalServingPoolEntry | not-accessible | current | DHCP Conditional Serving Pool table. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.1 | ColumndhcpPoolIndex | not-accessible | current | DHCP pool index |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.2 | ColumndhcpPoolEnable | read-only | current | Enables or disables this entry. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.3 | ColumndhcpPoolChaddr | read-write | current | MAC address of the physical interface of the DHCP client. A perfect match is needed. An empty value indicates this criterion is not used for conditional servin… |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.4 | ColumndhcpPoolChaddrMask | read-write | current | Chaddr is only to be done for bit positions set to one in the mask. A mask of FF:FF:FF:FF:FF:FF indicates all bits of the Chaddr are to be used for classificat… |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.5 | ColumndhcpPoolMinAddress | read-write | current | Specifies first address in the pool to be assigned by the DHCP server on the LAN interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.6 | ColumndhcpPoolMaxAddress | read-write | current | Specifies last address in the pool to be assigned by the DHCP server on the LAN interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.7 | ColumndhcpPoolReservedAddresses | read-write | current | Comma separated list of addresses marked reserved from the address allocation pool. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.8 | ColumndhcpPoolSubnetMask | read-write | current | Specifies the clients network subnet mask. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.9 | ColumndhcpPoolDnsServers | read-write | current | Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.10 | ColumndhcpPoolDomainName | read-write | current | Sets the domain name to provide to clients on the LAN interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.11 | ColumndhcpPoolIPRouters | read-write | current | Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.12 | ColumndhcpPoolLeaseTime | read-write | current | Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.13 | ColumndhcpPoolUseWanVlan | read-write | current | The WAN VLAN is used to determine the default gateway router for upstream packets that have a source IP address in this subnet. A zero value indicates that the… |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.14 | ColumndhcpPoolEnableStaticLease | read-write | current | Enable this option to permanently bind the IP address to the client MAC. |
| 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.15 | ColumndhcpPoolRowStatus | read-write | current | The SNMP RowStatus of the current row. The following object must be specified upon row creation: dhcpPoolChaddr |
| 1.3.6.1.4.1.5504.2.5.41.1.4 | NodezhnLANEthernetInterfaceObjects | |||
| 1.3.6.1.4.1.5504.2.5.41.1.4.1 | TablelanEthernetInterfaceConfigTable | not-accessible | current | Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all C… |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1 | RowlanEthernetInterfaceConfigEntry | not-accessible | current | Table entry for LAN ethernet interface configuration objects. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.1 | ColumnlanEthernetIndex | not-accessible | current | LAN Ethernet Interface Index |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.2 | ColumnlanEthernetEnable | read-write | current | Enables or disables this interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.3 | ColumnlanEthernetStatus | read-only | current | Indicates the status of this interface. Enumeration of: Up NoLink Error Disabled |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.4 | ColumnmacAddress | read-only | current | ASCII representation of the physical address of the interface |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.5 | ColumnmacAddressControlEnabled | read-only | current | Indicates whether MAC Address Control is enabled or not on this interface. MAC Address Control limits the clients that connect to those that match a list of al… |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.6 | ColumnmaxBitRate | read-write | current | The maximum upstream and downstream bit rate available to this connection. Enumeration of: 10 100 1000 Auto |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.7 | ColumnduplexMode | read-write | current | The duplex mode available to this connection. Enumeration of: Half Full Auto |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.8 | ColumnzhnIfName | read-only | current | Ethernet interface name such as eth0, eth1. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.9 | ColumnzhnEthernetPriorityMark | read-only | current | 802.1P priority value for this ethernet interface. Assigment of priority values is done via the Layer 2 Bridge Marking Table. Therefore, this object is read-on… |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.10 | Columndot1qPvid | read-write | current | Default 802.1Q VLAN ID for this ethernet interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.11 | ColumnlanEthernetAlias | read-only | current | A descriptive name for this ethernet interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.12 | ColumnpauseMode | read-write | current | The pause mode available to this connection. Enumeration of: Auto Enable Disable |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.13 | ColumnlanEthernetAcl | read-write | current | The access list values available to an ethernet interface. Enumeration of: Disable BlackList WhiteList Unsupported |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.14 | ColumnlanEthernetAclRulesNumberofEntries | read-only | current | The number of entries in the access list table for this ethernet interface. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.15 | ColumnlanEthernetLanFollowsWan | read-write | current | Enable or disable this LAN interface based upon the WAN status. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.16 | ColumnlanEthernetIgmpPriorityMark | read-write | current | The 802.1P priority value that this LAN interface will assign to ingress untagged IGMP frames. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.17 | ColumnlanEthernetIgmpPvid | read-write | current | The VLAN ID that this LAN interface will assign to ingress untagged IGMP frames. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2 | TablelanEthIntfStatisticsTable | not-accessible | current | Table of LAN ethernet interface statistics objects. This object contains statistics for an Ethernet LAN connection on a CPE device. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1 | RowlanEthIntfStatisticsEntry | not-accessible | current | Table entry for LAN ethernet interface statistics objects. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.1 | ColumnbytesSent | read-only | current | Total number of bytes sent over the interface since the CPE was last reset. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.2 | ColumnbytesReceived | read-only | current | Total number of bytes received over the interface since the CPE was last reset. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.3 | ColumnpacketsSent | read-only | current | Total number of packets sent over the interface since the CPE was last reset. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.4 | ColumnpacketsReceived | read-only | current | Total number of packets received over the interface since the CPE was last reset. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.5 | ColumntxErrors | read-only | current | Total number of transmit errors on the interface since the CPE was last reset. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.6 | ColumnrxErrors | read-only | current | Total number of receive errors on the interface since the CPE was last reset. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.7 | ColumntxDrops | read-only | current | Total number of packets dropped on the transmit side of the interface since the CPE was last reset. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.8 | ColumnrxDrops | read-only | current | Total number of packets dropped on the receive side of the interface since the CPE was last reset. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.3 | TablelanEthIntfStatusTable | not-accessible | current | Table of LAN ethernet interface status objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs tha… |
| 1.3.6.1.4.1.5504.2.5.41.1.4.3.1 | RowlanEthIntfStatusEntry | not-accessible | current | Table entry for LAN ethernet interface status objects. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.1 | ColumnlinkStatus | read-only | current | The port's current link status. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.2 | ColumnrateStatus | read-only | current | The port's current maximum bit rate. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.3 | ColumnduplexStatus | read-only | current | The port's current duplex mode. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.4 | ColumnpauseStatus | read-only | current | The port's current pause mode. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.4 | TablelanEthIntfRateLimitTable | not-accessible | current | Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all C… |
| 1.3.6.1.4.1.5504.2.5.41.1.4.4.1 | RowlanEthIntfRateLimitEntry | not-accessible | current | Rate limit table entry for LAN ethernet interface configuration objects. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.1 | ColumnrateLimitEnable | read-write | current | This object is used to enable or disable rate limit on a port. Setting it to True will rate limit traffic on the port to a specified peak rate. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.2 | ColumnpeakRate | read-write | current | This object identifies the maximum rate (0-1000) in Mbps on a port. If Rate Limit is disabled, this object has no effect. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.3 | ColumnburstSize | read-write | current | This object burst size. If Rate Limit is disabled, this object has no effect. |
| 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.4 | ColumnrateDirection | read-write | current | This object specifies the traffic direction to which the rate limit applies. The supported values are inbound, outbound or both. If the Rate Limit is disabled,… |
| 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.5 | ColumninboundPeakRate | read-write | current | This object identifies the maximum rate (0-1000) in Mbps on a port for inbound data. If Rate Limit is disabled, this object has no effect. |
| 1.3.6.1.4.1.5504.2.5.41.1.5 | TableigmpGroupsTable | not-accessible | current | Table of IGMP Multicast Groups currently detected by IGMP snooping. |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1 | RowigmpGroupsEntry | not-accessible | current | IGMP Multicast Groups table. |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1.1 | ColumnigmpGroupIndex | not-accessible | current | IGMP Multicast Groups Table Index |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1.2 | ColumnigmpGroupAddress | read-only | current | This object identifies the IP address of the multicast group. |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1.3 | ColumnigmpGroupReporterIP | read-only | current | This object identifies the IP address of the host in the multicast group. |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1.4 | ColumnigmpGroupReporterMAC | read-only | current | This object identifies the MAC address of the host in the multicast group. |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1.5 | ColumnigmpGroupInterface | read-only | current | This object identifies the interface that discovered the multicast group. |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1.6 | ColumnigmpGroupVlan | read-only | current | This object identifies the VLAN that discovered the multicast group. |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1.7 | ColumnigmpGroupExpiration | read-only | current | This object identifies the time (in seconds) before the multicast group times out. |
| 1.3.6.1.4.1.5504.2.5.41.1.5.1.8 | ColumnigmpGroupQuerier | read-only | current | This object identifies the IP address to be used by a proxy querier. |
| 1.3.6.1.4.1.5504.2.5.41.1.6 | NodezhnLANDeviceSystemObjects | |||
| 1.3.6.1.4.1.5504.2.5.41.1.6.1 | ScalarlanDefaultIfName | read-write | current | Configure the default interface name. |
| 1.3.6.1.4.1.5504.2.5.41.1.6.2 | ScalarlanDefaultIfIpAddress | read-only | current | The IP address of the default interface, as configured by IPInterfaceIPAddress. |
| 1.3.6.1.4.1.5504.2.5.41.1.7 | TablelanEthAclRulesTable | not-accessible | current | Table of LAN ethernet access list rules. This table contains a list of all access rules used to filter incoming traffic for a single physical ethernet interfac… |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1 | RowlanEthAclRulesEntry | not-accessible | current | Table entry for LAN ethernet access list objects. |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1.1 | ColumnlanAclRuleKey | not-accessible | current | Index for the Ethernet Access List table. |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1.2 | ColumnlanAclRuleIfName | read-only | current | Identify the interface name. |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1.3 | ColumnlanAclRuleName | read-write | current | The user defined identifier for the rule. When creating a new rule, this field must be provided and must be unique per interface rule. |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1.4 | ColumnlanAclRuleSourceIPAddress | read-write | current | The Source IP address to filter. The address may include a subnet prefix length in CIDR notation. Therefore the format would be 192.168.2.0/24. This is a ASCII… |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1.5 | ColumnlanAclRuleIPProtocol | read-write | current | The IPv4 Protocol to filter. |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1.6 | ColumnlanAclRuleSourceMACAddress | read-write | current | The Source MAC Address to filter. ASCII representation of the physical address of the interface |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1.7 | ColumnlanAclRuleSourceMACMask | read-write | current | Mask by which to filter MAC address. For example a MAC Mask of ff:ff:ff:00:00:00 would filter against the first six digits of the MAC address. ASCII representa… |
| 1.3.6.1.4.1.5504.2.5.41.1.7.1.8 | ColumnlanAclRuleRowStatus | read-write | current | The SNMP RowStatus of the current row. The following object must be specified upon row creation: lanAclRuleName |
| 1.3.6.1.4.1.5504.2.5.41.2 | NodezhnLANDeviceConformance | |||
| 1.3.6.1.4.1.5504.2.5.41.2.1 | NodezhnLANDeviceGroups | |||
| 1.3.6.1.4.1.5504.2.5.41.2.1.1 | GroupzhnLANDeviceGroup | current | A collection of Zhone LAN Device objects that describe the LAN interfaces of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.2 | GroupzhnLANIgmpSnoopingGroup | current | A collection of Zhone LAN Device objects that describe the IGMP snooping capabilities of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.3 | GroupzhnLANHostConfigManagementGroup | current | A collection of Zhone LAN Host Configuration Management objects that describe the LAN IP addressing of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.4 | GroupzhnIpInterfaceGroup | current | A collection of Zhone LAN IP Address objects that describe the IP connectivity of interfaces of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.5 | GroupzhnPPPoEConfigGroup | current | A collection of Zhone LAN PPPoE objects that describe the configuration of PPPoE connections for interfaces of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.6 | GroupzhnPPPoEStatusGroup | current | A collection of Zhone LAN PPPoE objects that describe the status of PPPoE connections for interfaces of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.7 | GroupzhnLANEthernetInterfaceConfigGroup | current | A collection of Zhone LAN Ethernet objects that describe the ethernet-like interfaces of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.8 | GroupzhnLANEthIntfStatisticsGroup | current | A collection of Zhone LAN Ethernet objects that convey statistical information for the ethernet-like interfaces of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.9 | GroupzhnLANEthIntfStatusGroup | current | A collection of Zhone LAN Ethernet objects that convey the status of the ethernet-like interfaces of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.10 | GroupzhnLANEthIntfRateLimitGroup | current | A collection of Zhone LAN Ethernet objects that convey the rate-limit information of the ethernet-like interfaces of the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.11 | GroupzhnLANIGMPMulticastGroup | current | A collection of Zhone LAN IGMP objects that identify the multicast groups currently detected by IGMP snooping within the device. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.12 | GroupzhnLANSystemGroup | current | A collection of Zhone LAN System-wide scalar objects that identify the system default interface. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.13 | GroupzhnLANAclRulesGroup | current | A collection of Zhone LAN Ethernet interface access-list rules with which to filter incoming traffic. | |
| 1.3.6.1.4.1.5504.2.5.41.2.1.14 | GroupzhnDhcpConditionalServingPoolGroup | current | A collection of configuration parameters for DHCP conditional serving. | |
| 1.3.6.1.4.1.5504.2.5.41.2.2 | NodezhnLANDeviceCompliances | |||
| 1.3.6.1.4.1.5504.2.5.41.2.2.1 | CompliancezhnLANDeviceCompliance | current | The Compliance statement for SNMP entities which manage the Zhone CPE LAN Device Information |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DNSTypeValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: Default - Get the DNS information from the uplink interface Static - The DNS information is manually provisioned DHCP - The DNS information is obtained via DHCP |
| IGMPSnoopingModeValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: Standard Blocking |
| IPInterfaceAddressingTypeValues | OCTET STRING (SIZE (0..32)) | current | The addressing method used to assign the LAN-side IP Address. Enumeration of: Unknown Unconfigured Default DHCP Static PPPoE |
| IpPppoeConnectionTypeValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: IP_Routed IP_Bridged PPPoE_IP_Routed PPPoE_IP_Bridged Unconfigured |
| LANEthernetAclValues | OCTET STRING (SIZE (0..32)) LANEthernetIpProtocolValues::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The access list IP protocol values with which to filter. Enumeration of: tcp(1) udp(2) icmp(3) igmp(4) any(5) " SYNTAX INTEGER { tcp(1), udp(2), icmp(3), igmp(4), any(5) } | current | The access list values available to an ethernet interface. Enumeration of: Disable BlackList WhiteList Unsupported |
| LANEthernetDuplexModeValues | OCTET STRING (SIZE (0..32)) | current | The duplex mode available to this connection. Enumeration of: Half Full Auto |
| LANEthernetMaxBitRateValues | OCTET STRING (SIZE (0..32)) | current | The maximum upstream and downstream bit rate available to this connection. Enumeration of: 10 100 1000 Auto |
| LANEthernetPauseModeValues | OCTET STRING (SIZE (0..32)) | current | The pause mode available to this connection. Enumeration of: Auto Enable Disable |
| LANEthernetStatusValues | OCTET STRING (SIZE (0..32)) | current | Ethernet LAN interface status. An enumeration of: Up NoLink Error Disabled |
| LANRateLimitBurstSizeValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: 16KB 20KB 28KB 40KB 76KB 140KB 268KB 500KB |
| LANRateLimitDirectionValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: Inbound Outbound Both-Directions |
| PPPAuthenticationProtocolValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP |
| PPPCompressionProtocolValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: None VanJacobsen STAC-LZS |
| PPPEncryptionProtocolValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: None MPPE |
| PPPUserConnectionRequestValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: None Down Up Connect Disconnect |
| WANPppConnectionStatusValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: Unconfigured Connecting Authenticating Connected PendingDisconnect Disconnecting Disconnected |
| WANPppLastConnectionErrorValues | OCTET STRING (SIZE (0..32)) | current | Enumeration of: ERROR_NONE ERROR_ISP_TIME_OUT ERROR_COMMAND_ABORTED ERROR_NOT_ENABLED_FOR_INTERNET ERROR_BAD_PHONE_NUMBER ERROR_USER_DISCONNECT ERROR_ISP_DISCONNECT ERROR_IDLE_DISCONNECT ERROR_FORCED_DISCONNECT ERROR_SE… |