ZTE-AN-ADSL-LINE-MIB
129 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1000 | IdentityzxAnAdslMib | |||
| 1.3.6.1.4.1.3902.1015.1000.1 | NodezxAnAdslMibObjects | |||
| 1.3.6.1.4.1.3902.1015.1000.1.1 | TablezxAnAdslLineTable | not-accessible | current | Adsl line additional information table. |
| 1.3.6.1.4.1.3902.1015.1000.1.1.1 | RowzxAnAdslLineEntry | not-accessible | current | Adsl line additional information entry |
| 1.3.6.1.4.1.3902.1015.1000.1.1.1.1 | ColumnzxAnAdslLineTxDataRate | read-only | current | Transmitted net data rate on this line. |
| 1.3.6.1.4.1.3902.1015.1000.1.1.1.2 | ColumnzxAnAdslLineRxDataRate | read-only | current | Recieved net data rate on this line. |
| 1.3.6.1.4.1.3902.1015.1000.1.1.1.3 | ColumnzxAnAdslAtucActInp | read-only | current | Actual impulse noise protection. This parameter reports the actual impulse noise protection (INP) on the channel in the L0 state. In the L1 or L2 state, the pa… |
| 1.3.6.1.4.1.3902.1015.1000.1.1.1.4 | ColumnzxAnAdslAturActInp | read-only | current | Actual impulse noise protection. This parameter reports the actual impulse noise protection (INP) on the channel in the L0 state. In the L1 or L2 state, the pa… |
| 1.3.6.1.4.1.3902.1015.1000.1.1.1.5 | ColumnzxAnAdslLineExtConfPrf | read-write | current | The value of this object identifies the row in the XDSL2 Line Ext Profile Table, (zxAnXdsl2LnExtConfPrfTable), which applies for this line. |
| 1.3.6.1.4.1.3902.1015.1000.1.2 | TablezxAnAdslLineConfProfileExtTable | not-accessible | current | Adsl line config profile extended information table. |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1 | RowzxAnAdslLineConfProfileExtEntry | not-accessible | current | An entry extends the adslLineConfProfileEntry defined in [RFC2662]. Each entry corresponds to an ADSL line profile. |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.1 | ColumnzxAnAdslLineConfTxStartBin | read-create | current | Specifies lowest bin number allowed for Tx signal. Different line coding type has different default value. 0x20 (default for Annex A only) 0x20 (default for AD… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.2 | ColumnzxAnAdslLineConfTxEndBin | read-create | current | Specifies highest bin number allowed for Tx signal. Default = 0x3ff (default for all Annexes and ADSL2/ADSL2plus) |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.3 | ColumnzxAnAdslLineConfRxStartBin | read-create | current | Specifies lowest bin number allowed for Rx signal. Different line coding type has different default value. 0x06 (default for Annex A) 0x01 (default for Annex B… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.4 | ColumnzxAnAdslLineConfRxEndBin | read-create | current | Specifies highest bin number allowed for Rx signal. Default = 0x3f (default for all Annexes and ADSL2/ADLS2plus) |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.5 | ColumnzxAnAdslLineConfUseCustomBins | read-create | current | Enable or disable custom bin selection for upstream/downstream transmission. This parameter is used in conjunction with the adslAtucDMTConfFreqBins and adslAtu… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.6 | ColumnzxAnAdslAtucConfPsdMaskType | read-create | current | It is supported by G.Span. Dsl card team will provide files about it in details. |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.7 | ColumnzxAnAdslLineConfPMMode | read-create | current | This configuration parameter defines the line states the ATU-C may autonomously transition to on this line. It is coded in a bit map representation (0 if not a… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.8 | ColumnzxAnAdslLineConfPML2Rate | read-create | current | PM configuration parameter,related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.9 | ColumnzxAnAdsl2ConfMinProtectionDs | read-create | current | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can … |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.10 | ColumnzxAnAdslLineConfMinProtectionUs | read-create | current | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.11 | ColumnzxAnAdslConfDMTConfTrellis | read-create | current | Parameter that enable or disable trellis coding. Trellis coding should always be enabled for its clear performance advantage. Trellis coding is mandatory for A… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.12 | ColumnzxAnAdslAtucConfMaxBitsPerBin | read-create | current | Specifies maximum Rx number of bits per bin. |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.13 | ColumnzxAnAdslAtucConfBitSwapDs | read-create | current | enables/disables downstream bit swapping. Different line coding type has different default value. disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C C.x… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.14 | ColumnzxAnAdslAtucConfBitSwapUs | read-create | current | enables/disables upstream bit swapping. Different line coding type has different default value. disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C C.x, … |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.15 | ColumnzxAnAdslAtucConfReAdsl2Enable | read-create | current | Defines whether downstream READSL2 operation should be forced by the ATU-C. |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.16 | ColumnzxAnAdslAtucConfPmL0Time | read-create | current | PM configuration parameter,related to the L2 low power state. This parameter represents the minimum time between an exit from the L2 state and the next entry i… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.17 | ColumnzxAnAdslAtucConfPmL2Time | read-create | current | PM configuration parameter,related to the L2 low power state. This parameter represents the minimum time between an entry into the L2 state and the first Power… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.18 | ColumnzxAnAdslAtucConfPmL2Atpr | read-create | current | PM configuration parameter,related to the L2 low power state. This parameter represents the Maximum Aggregate Transmit Power Reduction (in dB) that can be perf… |
| 1.3.6.1.4.1.3902.1015.1000.1.2.1.19 | ColumnzxAdsl2ConfPsdMaskSelectUs | read-create | current | The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled… |
| 1.3.6.1.4.1.3902.1015.1000.1.3 | TablezxAnAdslAtucChanTable | not-accessible | current | This table provides one row for each Atuc channel. |
| 1.3.6.1.4.1.3902.1015.1000.1.3.1 | RowzxAnAdslAtucChanEntry | not-accessible | current | Adsl channel layer line actuals information entry |
| 1.3.6.1.4.1.3902.1015.1000.1.3.1.1 | ColumnzxAnAdslAtucChanInpEtr | read-only | current | GINP configuration parameters of downstream. The expected throughput (ETR). |
| 1.3.6.1.4.1.3902.1015.1000.1.3.1.2 | ColumnzxAnAdslAtucChanInpEftr | read-only | current | GINP configuration parameters of downstream. The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits or… |
| 1.3.6.1.4.1.3902.1015.1000.1.3.1.3 | ColumnzxAnAdslAtucChanInpMinEftr | read-only | current | GINP configuration parameters of downstream. The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading … |
| 1.3.6.1.4.1.3902.1015.1000.1.3.1.4 | ColumnzxAnAdslAtucChanInpActDelay | read-only | current | GINP configuration parameters of downstream. If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-in… |
| 1.3.6.1.4.1.3902.1015.1000.1.4 | TablezxAnAdslAturChanTable | not-accessible | current | This table provides one row for each ATUR channel. |
| 1.3.6.1.4.1.3902.1015.1000.1.4.1 | RowzxAnAdslAturChanEntry | not-accessible | current | Adsl channel layer line actuals information entry |
| 1.3.6.1.4.1.3902.1015.1000.1.4.1.1 | ColumnzxAnAdslAturChanInpEtr | read-only | current | GINP configuration parameters of upstream. The expected throughput (ETR). |
| 1.3.6.1.4.1.3902.1015.1000.1.4.1.2 | ColumnzxAnAdslAturChanInpEftr | read-only | current | GINP configuration parameters of upstream.. The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits ori… |
| 1.3.6.1.4.1.3902.1015.1000.1.4.1.3 | ColumnzxAnAdslAturChanInpMinEftr | read-only | current | GINP configuration parameters of upstream. The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of… |
| 1.3.6.1.4.1.3902.1015.1000.1.4.1.4 | ColumnzxAnAdslAturChanInpActDelay | read-only | current | GINP configuration parameters of upstream. If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-inde… |
| 1.3.6.1.4.1.3902.1015.1000.1.20 | TablezxAnAdslLineAlarmConfProfileExtTable | not-accessible | current | Adsl line alarm config profile extended information table. The cycle of thresholds monitoring shoul be less than 5 minutes. |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1 | RowzxAnAdslLineAlarmConfProfileExtEntry | not-accessible | current | An entry extends the adslLineAlarmConfProfileEntry defined in [RFC2662]. Each entry corresponds to an ADSL line alarm profile. |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.1 | ColumnzxAnAdslAtucConnRateTolerance | read-create | current | Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and actual adslAtucChanCurrTxRate. Calculation: 100*(adslAtucChanConfInterleaveMaxTxRate - ads… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.2 | ColumnzxAnAdslAturConnRateTolerance | read-create | current | Tolerance between configured adslAturChanConfInterleaveMaxTxRate and actual adslAturChanCurrTxRate. Calculation: 100*(adslAturChanConfInterleaveMaxTxRate - ads… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.3 | ColumnzxAnAdslAtucThreshConnRate | read-create | current | Threshold of Atuc connection rate. If adslAtucChanCurrTxRate is lower than zxAnAdslAtucThreshConnRate, zxAnAdslAtucLowConnRateTrap trap will be sent. A value o… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.4 | ColumnzxAnAdslAturThreshConnRate | read-create | current | Threshold of Atur connection rate. If adslAturChanCurrTxRate is lower than zxAnAdslAturThreshConnRate, zxAnAdslAturLowConnRateTrap trap will be sent. A value o… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.5 | ColumnzxAnAdslMaxAtucConnRateTolerance | read-create | current | Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and actual adslAtucChanCurrTxRate. Calculation: 100*(adslAtucChanCurrTxRate - adslAtucChanConf… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.6 | ColumnzxAnAdslMaxAturConnRateTolerance | read-create | current | Tolerance between configured adslAturChanConfInterleaveMaxTxRate and actual adslAturChanCurrTxRate. Calculation: 100*(adslAturChanCurrTxRate - adslAturChanConf… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.7 | ColumnzxAnAdslMaxThreshAtucConnRate | read-create | current | Threshold of Atuc connection rate. If adslAtucChanCurrTxRate is higher than zxAnAdslMaxThreshAtucConnRate, zxAnAdslAtucHighConnRateTrap trap will be sent. A va… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.8 | ColumnzxAnAdslMaxThreshAturConnRate | read-create | current | Threshold of Atur connection rate. If adslAturChanCurrTxRate is higher than zxAnAdslMaxThreshAturConnRate, zxAnAdslAturHighConnRateTrap trap will be sent. A va… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.9 | ColumnzxAnAdslAturInitFailTrapEnable | read-create | current | Enables and disables the InitFailureTrap on the atur interface. unused1 (0) - This bit is no use to enable or disable the the InitFailureTrap on the atur inter… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.10 | ColumnzxAnAdslThreshAtucInpLeftr | read-create | current | GINP configuration parameters of downstream. The fraction of NDR that shall be used as the threshold for leftr defects. lefter (The low error-free throughput r… |
| 1.3.6.1.4.1.3902.1015.1000.1.20.1.11 | ColumnzxAnAdslThreshAturInpLeftr | read-create | current | GINP configuration parameters of upstream. The fraction of NDR that shall be used as the threshold for leftr defects. lefter (The low error-free throughput rat… |
| 1.3.6.1.4.1.3902.1015.1000.1.21 | TablezxAnAdslAtucPerfDataTable | not-accessible | current | This table provides atuc performance. |
| 1.3.6.1.4.1.3902.1015.1000.1.21.1 | RowzxAnAdslAtucPerfDataEntry | not-accessible | current | the entry for atuc channel performance. |
| 1.3.6.1.4.1.3902.1015.1000.1.21.1.1 | ColumnzxAnAdslAtucPerfDataFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event on this channel. |
| 1.3.6.1.4.1.3902.1015.1000.1.21.1.2 | ColumnzxAnAdslAtucPerfDataCurr15Fecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the current 15 minute time interval. |
| 1.3.6.1.4.1.3902.1015.1000.1.21.1.3 | ColumnzxAnAdslAtucPerfDataCurr1DayFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the current 1 day interval. |
| 1.3.6.1.4.1.3902.1015.1000.1.21.1.4 | ColumnzxAnAdslAtucPerfDataPrev1DayFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the most recent previous 1-day perio… |
| 1.3.6.1.4.1.3902.1015.1000.1.22 | TablezxAnAdslAturPerfDataTable | not-accessible | current | This table provides atur performance. |
| 1.3.6.1.4.1.3902.1015.1000.1.22.1 | RowzxAnAdslAturPerfDataEntry | not-accessible | current | the entry for atur performance. |
| 1.3.6.1.4.1.3902.1015.1000.1.22.1.1 | ColumnzxAnAdslAturPerfDataFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event on this channel. |
| 1.3.6.1.4.1.3902.1015.1000.1.22.1.2 | ColumnzxAnAdslAturPerfDataCurr15Fecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the current 15 minute time interval. |
| 1.3.6.1.4.1.3902.1015.1000.1.22.1.3 | ColumnzxAnAdslAturPerfDataCurr1DayFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the current 1 day interval. |
| 1.3.6.1.4.1.3902.1015.1000.1.22.1.4 | ColumnzxAnAdslAturPerfDataPrev1DayFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event on this channel in this line within the most recent previous 1-day perio… |
| 1.3.6.1.4.1.3902.1015.1000.1.23 | TablezxAnAdslAtucChanPerfDataTable | not-accessible | current | This table provides atuc channel performance. |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1 | RowzxAnAdslAtucChanPerfDataEntry | not-accessible | current | the entry for atuc channel performance. |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.1 | ColumnzxAnAtucChanPerfCurr15RtxDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current 15 minute interva… |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.2 | ColumnzxAnAtucChanPerfCurr15RtxCDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retran… |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.3 | ColumnzxAnAtucChanPerfCurr15RtxUcDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission in the… |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.4 | ColumnzxAnAtucChanPerfCurr1DRtxDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current day interval. Mul… |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.5 | ColumnzxAnAtucChanPerfCurr1DRtxCDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retran… |
| 1.3.6.1.4.1.3902.1015.1000.1.23.1.6 | ColumnzxAnAtucChanPerfCurr1DRtxUcDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. |
| 1.3.6.1.4.1.3902.1015.1000.1.24 | TablezxAnAdslAturChanPerfDataTable | not-accessible | current | This table provides atur channel performance. |
| 1.3.6.1.4.1.3902.1015.1000.1.24.1 | RowzxAnAdslAturChanPerfDataEntry | not-accessible | current | the entry for atur channel performance. |
| 1.3.6.1.4.1.3902.1015.1000.1.24.1.1 | ColumnzxAnAturChanPerfCurr15RtxDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current 15 minute interva… |
| 1.3.6.1.4.1.3902.1015.1000.1.24.1.2 | ColumnzxAnAturChanPerfCurr15RtxCDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retran… |
| 1.3.6.1.4.1.3902.1015.1000.1.24.1.3 | ColumnzxAnAturChanPerfCurr15RtxUcDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission in the… |
| 1.3.6.1.4.1.3902.1015.1000.1.24.1.4 | ColumnzxAnAturChanPerfCurr1DRtxDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter in the current day interval. Mul… |
| 1.3.6.1.4.1.3902.1015.1000.1.24.1.5 | ColumnzxAnAturChanPerfCurr1DRtxCDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retran… |
| 1.3.6.1.4.1.3902.1015.1000.1.24.1.6 | ColumnzxAnAturChanPerfCurr1DRtxUcDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. |
| 1.3.6.1.4.1.3902.1015.1000.1.25 | TablezxAnAdslAtucChanIntervalTable | not-accessible | current | The table zxAnAdslAtucChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel. |
| 1.3.6.1.4.1.3902.1015.1000.1.25.1 | RowzxAnAdslAtucChanIntervalEntry | not-accessible | current | The table zxAnAdslAtucChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel. |
| 1.3.6.1.4.1.3902.1015.1000.1.25.1.1 | ColumnzxAnAdslAtucChanIntervalRtxDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple r… |
| 1.3.6.1.4.1.3902.1015.1000.1.25.1.2 | ColumnzxAnAdslAtucChanIntervalRtxCDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retran… |
| 1.3.6.1.4.1.3902.1015.1000.1.25.1.3 | ColumnzxAnAdslAtucChanIntervalRtxUcDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. durin… |
| 1.3.6.1.4.1.3902.1015.1000.1.26 | TablezxAnAdslAturChanIntervalTable | not-accessible | current | The table zxAnAdslAturChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel. |
| 1.3.6.1.4.1.3902.1015.1000.1.26.1 | RowzxAnAdslAturChanIntervalEntry | not-accessible | current | The table zxAnAdslAturChanIntervalTable contains history Performance Monitoring results for 15min of DSL channel. |
| 1.3.6.1.4.1.3902.1015.1000.1.26.1.1 | ColumnzxAnAdslAturChanIntervalRtxDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple r… |
| 1.3.6.1.4.1.3902.1015.1000.1.26.1.2 | ColumnzxAnAdslAturChanIntervalRtxCDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retran… |
| 1.3.6.1.4.1.3902.1015.1000.1.26.1.3 | ColumnzxAnAdslAturChanIntervalRtxUcDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission. durin… |
| 1.3.6.1.4.1.3902.1015.1000.1.27 | TablezxAnAdslAtucChanHist1DayTable | not-accessible | current | The table zxAnAdslAtucChanHist1DayTable contains channel history for 1 day intervals of DSL. |
| 1.3.6.1.4.1.3902.1015.1000.1.27.1 | RowzxAnAdslAtucChanHist1DayEntry | not-accessible | current | The table zxAnAdslAtucChanHist1DayTable contains PM channel history for 1 day intervals of DSL. The indexes of this table is an interface index where the inter… |
| 1.3.6.1.4.1.3902.1015.1000.1.27.1.1 | ColumnzxAnAdslAtucChanHist1DayNumber | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.3902.1015.1000.1.27.1.2 | ColumnzxAnAdslAtucChanHist1DayRtxDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple r… |
| 1.3.6.1.4.1.3902.1015.1000.1.27.1.3 | ColumnzxAnAdslAtucChanHist1DayRtxCDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retran… |
| 1.3.6.1.4.1.3902.1015.1000.1.27.1.4 | ColumnzxAnAdslAtucChanHist1DayRtxUcDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission during… |
| 1.3.6.1.4.1.3902.1015.1000.1.28 | TablezxAnAdslAturChanHist1DayTable | not-accessible | current | The table zxAnAdslAturChanHist1DayTable contains channel history for 1 day intervals of DSL. |
| 1.3.6.1.4.1.3902.1015.1000.1.28.1 | RowzxAnAdslAturChanHist1DayEntry | not-accessible | current | The table zxAnAdslAturChanHist1DayTable contains PM channel history for 1 day intervals of DSL. The indexes of this table is an interface index where the inter… |
| 1.3.6.1.4.1.3902.1015.1000.1.28.1.1 | ColumnzxAnAdslAturChanHist1DayNumber | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.3902.1015.1000.1.28.1.2 | ColumnzxAnAdslAturChanHist1DayRtxDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been retransmitted by the transmitter during this interval. Multiple r… |
| 1.3.6.1.4.1.3902.1015.1000.1.28.1.3 | ColumnzxAnAdslAturChanHist1DayRtxCDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU has been detected in error and has been successfully corrected by a retran… |
| 1.3.6.1.4.1.3902.1015.1000.1.28.1.4 | ColumnzxAnAdslAturChanHist1DayRtxUcDtu | read-only | current | GINP configuration parameters. this is a counter that is incremented each time a DTU is detected in error and has not been corrected by a retransmission during… |
| 1.3.6.1.4.1.3902.1015.1000.1.30 | TablezxAnDslLoopBackTestTable | not-accessible | current | This table provides one row for each DSL line loopback test. |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1 | RowzxAnDslLoopBackTestEntry | not-accessible | current | DSL line loopback test information entry |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.1 | ColumnzxAnDslLoopBackTestRack | not-accessible | current | Rack number of the dsl port. |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.2 | ColumnzxAnDslLoopBackTestShelf | not-accessible | current | Shelf number of the dsl port. |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.3 | ColumnzxAnDslLoopBackTestSlot | not-accessible | current | Slot number of the dsl port. |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.4 | ColumnzxAnDslLoopBackTestPort | not-accessible | current | The dsl port number. |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.5 | ColumnzxAnDslLoopBackTestBridgePort | not-accessible | current | Dsl bridge port index. eg.It is PVC ID in ADSL port. If the test is only in the physical port,then this fileds will be 0 |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.6 | ColumnzxAnDslLoopBackTestType | read-create | current | This is loop test action expected. NOTES: |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.7 | ColumnzxAnDslLoopBackTestOperStatus | read-only | current | This is loop test operational status. Note: if zxAnDslLoopBackTestOperStatus equal to Excuting(1), ifOperStaus should be loopback test(3). |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.8 | ColumnzxAnDslLoopBackTestResult | read-only | current | This is loop test result and includes reasons for test failures. |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.9 | ColumnzxAnDslLoopBackTestConfSendCells | read-create | current | The count of cells will be sent in the loopback test. |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.10 | ColumnzxAnDslLoopBackTestResultRecivedCells | read-only | current | The count of recived cells in the loopback test. |
| 1.3.6.1.4.1.3902.1015.1000.1.30.1.15 | ColumnzxAnDslLoopBackTestRowStatus | read-create | current | Loop test table RowStatus . |
| 1.3.6.1.4.1.3902.1015.1000.2 | NodezxAnAdslTraps | |||
| 1.3.6.1.4.1.3902.1015.1000.2.1 | NotificationzxAnAdslAtuxConnRateOverThreshTrap | current | zxAnAdslAtucConnRateTolerance threshold or zxAnAdslAtucThreshConnRate reached. | |
| 1.3.6.1.4.1.3902.1015.1000.2.2 | NotificationzxAnAdslAtuxConnRateUnderThreshTrap | current | AtucConnRate Difference is below threshold of zxAnAdslAtucConnRateTolerance. Or adslAtucChanCurrTxRate is below threshold of zxAnAdslAtucThreshConnRate. | |
| 1.3.6.1.4.1.3902.1015.1000.2.3 | NotificationzxAnAdslAtucHighConnRateTrap | current | zxAnAdslMaxAtucConnRateTolerance threshold or zxAnAdslMaxThreshAtucConnRate reached. | |
| 1.3.6.1.4.1.3902.1015.1000.2.4 | NotificationzxAnAdslAtucHighConnRateClearTrap | current | zxAnAdslAtucHighConnRateTrap clear. | |
| 1.3.6.1.4.1.3902.1015.1000.2.5 | NotificationzxAnAdslAtucLowConnRateTrap | current | zxAnAdslAtucConnRateTolerance threshold or zxAnAdslAtucThreshConnRate reached. | |
| 1.3.6.1.4.1.3902.1015.1000.2.6 | NotificationzxAnAdslAtucLowConnRateClearTrap | current | zxAnAdslAtucLowConnRateTrap clear. | |
| 1.3.6.1.4.1.3902.1015.1000.2.7 | NotificationzxAnAdslAturHighConnRateTrap | current | zxAnAdslMaxAturConnRateTolerance threshold or zxAnAdslMaxThreshAturConnRate reached. | |
| 1.3.6.1.4.1.3902.1015.1000.2.8 | NotificationzxAnAdslAturHighConnRateClearTrap | current | zxAnAdslAturHighConnRateTrap clear. | |
| 1.3.6.1.4.1.3902.1015.1000.2.9 | NotificationzxAnAdslAturLowConnRateTrap | current | zxAnAdslAturConnRateTolerance threshold or zxAnAdslAturThreshConnRate reached. | |
| 1.3.6.1.4.1.3902.1015.1000.2.10 | NotificationzxAnAdslAturLowConnRateClearTrap | current | zxAnAdslAturLowConnRateTrap clear. |