ZTE-AN-BFD-MIB
26 objects
BFD MIB definition.
Imported Objects
| INET-ADDRESS-MIB | InetAddress |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TimeStamp TruthValue |
| ZTE-AN-TC-MIB | zxAn ZxAnIfindex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.15 | IdentityzxAnBfdMib | BFD MIB definition. | ||
| 1.3.6.1.4.1.3902.1015.15.1 | NodezxAnBfdMibObjects | |||
| 1.3.6.1.4.1.3902.1015.15.1.20 | TablezxAnBfdSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1 | RowzxAnBfdSessEntry | not-accessible | current | The BFD Session Entry describes BFD session. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.1 | ColumnzxAnBfdSessApplicationType | not-accessible | current | this object contains an index used to indicate a local application which owns or maintains this BFD session. Register Protocol Type. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.2 | ColumnzxAnBfdL3IfVlan | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.3 | ColumnzxAnBfdSessDiscriminator | read-only | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.4 | ColumnzxAnBfdSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.5 | ColumnzxAnBfdSessUdpPort | read-only | current | The UDP Port for BFD. The default value is the well-known value for this port. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.6 | ColumnzxAnBfdSessState | read-only | current | The perceived state of the BFD session. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.7 | ColumnzxAnBfdSessDemandModeDesiredFlag | read-only | current | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fa… |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.8 | ColumnzxAnBfdSessEchoFuncModeDesiredFlag | read-only | current | This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(… |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.9 | ColumnzxAnBfdSessLocalAddrType | read-only | current | This object specifies IP address of the interface associated with this BFD session. Only values ipv4(1) or ipv6(2) have to be supported. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.10 | ColumnzxAnBfdSessLocalAddr | read-only | current | This object specifies IP address of the interface associated with this BFD session. It can also be used to enabled BFD on a specific interface. The value is se… |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.11 | ColumnzxAnBfdSessRemoteAddrType | read-only | current | This object specifies IP address of the interface associated with this BFD session. Only values ipv4(1) or ipv6(2) have to be supported. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.12 | ColumnzxAnBfdSessRemoteAddr | read-only | current | This object specifies remote IP address of the interface associated with this BFD session. It can also be used to enabled BFD on a specific interface. The valu… |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.13 | ColumnzxAnBfdSessDesiredMinTxInterval | read-write | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.14 | ColumnzxAnBfdSessRequiredMinRxInterval | read-write | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.15 | ColumnzxAnBfdSessDetectMult | read-write | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.3902.1015.15.1.20.1.16 | ColumnzxAnBfdSessDownDiag | read-only | current | This object specifies the local system's reason for the last change in session state. |
| 1.3.6.1.4.1.3902.1015.15.1.21 | TablezxAnBfdSessPerfTable | not-accessible | current | This table specifies BFD Session performance counters. |
| 1.3.6.1.4.1.3902.1015.15.1.21.1 | RowzxAnBfdSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD Session. bfdCounterDiscontinuityTime is used to indicate potential discontinuity for all … |
| 1.3.6.1.4.1.3902.1015.15.1.21.1.1 | ColumnzxAnBfdSessPerfPktIn | read-only | current | The total number of BFD control packets received for this BFD session. |
| 1.3.6.1.4.1.3902.1015.15.1.21.1.2 | ColumnzxAnBfdSessPerfPktOut | read-only | current | The total number of BFD control packets sent for this BFD session. |
| 1.3.6.1.4.1.3902.1015.15.1.21.1.3 | ColumnzxAnBfdSessPerfUpTime | read-only | current | The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value. |
| 1.3.6.1.4.1.3902.1015.15.1.21.1.4 | ColumnzxAnBfdSessPerfDownTime | read-only | current | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object con… |