ZTE-AN-BFD-STD-MIB
84 objects
Bidirectional Forwarding Management Information Base. This MIB is currently under the draft submitted by BT and Cisco, so the implement of current network management and network elements are temporary. This draft is currently in Standard Track phase. When the formal standard to be released, network management and network elements must re-implement in accordance with the official standards.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| ZTE-AN-TC-MIB | zxAn |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.16 | IdentityzxAnBfdStdMib | Bidirectional Forwarding Management Information Base. This MIB is currently under the draft submitted by BT and Cisco, so the implement of current network mana… | ||
| 1.3.6.1.4.1.3902.1015.16.0 | NodezxAnBfdStdNotifications | |||
| 1.3.6.1.4.1.3902.1015.16.0.1 | NotificationzxAnBfdStdSessUp | current | This notification is generated when the zxAnBfdStdSessState object for one or more contiguous entries in zxAnBfdStdSessTable are about to enter the up(4) state… | |
| 1.3.6.1.4.1.3902.1015.16.0.2 | NotificationzxAnBfdStdSessDown | current | This notification is generated when the zxAnBfdStdSessState object for one or more contiguous entries in zxAnBfdStdSessTable are about to enter the down(2) or … | |
| 1.3.6.1.4.1.3902.1015.16.1 | NodezxAnBfdStdObjects | |||
| 1.3.6.1.4.1.3902.1015.16.1.1 | NodezxAnBfdStdGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.16.1.1.1 | ScalarzxAnBfdStdAdminStatus | read-write | current | The global administrative status of BFD in this router. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disabl… |
| 1.3.6.1.4.1.3902.1015.16.1.1.2 | ScalarzxAnBfdStdSessTrapsEnable | read-write | current | If this object is set to true(1), then it enables the emission of zxAnBfdStdSessUp and zxAnBfdStdSessDown notifications; otherwise these notifications are not … |
| 1.3.6.1.4.1.3902.1015.16.1.2 | TablezxAnBfdStdSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1 | RowzxAnBfdStdSessEntry | not-accessible | current | The BFD Session Entry describes BFD session. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.1 | ColumnzxAnBfdStdSessIndex | not-accessible | current | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.2 | ColumnzxAnBfdStdSessVersionNumber | read-create | current | The version number of the BFD protocol that this session is running in. Write access is available for this object to provide ability to set desired version for… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.3 | ColumnzxAnBfdStdSessType | read-only | current | This object specifies the type of this BFD session. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.4 | ColumnzxAnBfdStdSessMHopUniLinkMode | read-only | current | For zxAnBfdStdSessType of multiHopUnidirectionalLinks(4), this object specifies whether this BFD session is running in active(2) mode or passive(3) mode. For a… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.5 | ColumnzxAnBfdStdSessDiscriminator | read-only | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.6 | ColumnzxAnBfdStdSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. The value may be zero(0) if the remote discriminator is not y… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.7 | ColumnzxAnBfdStdSessDestinationUdpPort | read-only | current | This object specifies the destination UDP port used for this BFD session. The value maybe zero(0) if the session is in adminDown(1) state. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.8 | ColumnzxAnBfdStdSessSourceUdpPort | read-create | current | This object specifies the source UDP port of BFD control packets for this BFD session. The value maybe zero(0) if the session is in adminDown(1) state. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.9 | ColumnzxAnBfdStdSessEchoSourceUdpPort | read-create | current | This object specifies the source UDP port of BFD echo packets for this BFD session. The value maybe zero(0) if the session is not running in the echo mode, or … |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.10 | ColumnzxAnBfdStdSessAdminStatus | read-create | current | A transition from 'stop' to 'start' will start the BFD state machine for the session. The state machine will have an initial state of down. A transition from '… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.11 | ColumnzxAnBfdStdSessState | read-only | current | The perceived state of the BFD session. BFD State failing(5) is only applicable if this BFD session is running version 0. Upon creation of a new BFD session vi… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.12 | ColumnzxAnBfdStdSessRemoteHeardFlag | read-only | current | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD p… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.13 | ColumnzxAnBfdStdSessDiag | accessible-for-notify | current | A diagnostic code specifying the local system's reason for the last transition of the session from up(4) to some other state. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.14 | ColumnzxAnBfdStdSessOperMode | read-only | current | This object specifies current operating mode that BFD session is operating in. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.15 | ColumnzxAnBfdStdSessDesiredDmdMode | read-create | current | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fa… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.16 | ColumnzxAnBfdStdSessCtrlPlaneIndep | read-only | current | This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if … |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.17 | ColumnzxAnBfdStdSessMultipointFlag | read-only | current | This object indicates the Multipoint (M) bit for this session. It is set to true(1) if Multipoint (M) bit is set to 1. Otherwise, the value is set to false(2) |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.18 | ColumnzxAnBfdStdSessInterface | read-create | current | This object contains an interface index used to indicate the interface which this BFD session is running on. This value can be zero if there is no interface as… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.19 | ColumnzxAnBfdStdSessPeerIpAddrType | read-create | current | This object specifies IP address type of the neighboring IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1), ipv6(2), o… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.20 | ColumnzxAnBfdStdSessPeerIpAddr | read-create | current | This object specifies the neighboring IP address which is being monitored with this BFD session. It can also be used to enabled BFD on a specific interface. Th… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.21 | ColumnzxAnBfdStdSessGTSM | read-create | current | Setting the value of this object to true(1) will enable GTSM protection of the BFD session. GTSM MUST be enabled on a singleHop(1) session if no authentication… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.22 | ColumnzxAnBfdStdSessGTSMTTL | read-create | current | This object is valid only when zxAnBfdStdSessGTSM protection is enabled on the system. This object specifies the minimum allowed TTL for received BFD control p… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.23 | ColumnzxAnBfdStdSessDesiredMinTxIntv | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.24 | ColumnzxAnBfdStdSessReqMinRxIntv | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.25 | ColumnzxAnBfdStdSessReqMinEchoRxIntv | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.26 | ColumnzxAnBfdStdSessDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.27 | ColumnzxAnBfdStdSessNegInterval | read-only | current | This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD Control packets. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.28 | ColumnzxAnBfdStdSessNegEchoInterval | read-only | current | This object specifies the negotiated interval, in microseconds, that the local system is transmitting BFD echo packets. Value is expected to be zero if the ses… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.29 | ColumnzxAnBfdStdSessNegDetectMult | read-only | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.30 | ColumnzxAnBfdStdSessAuthPresFlag | read-only | current | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be aut… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.31 | ColumnzxAnBfdStdSessAuthType | read-create | current | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set. Max-access to this object as well as ot… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.32 | ColumnzxAnBfdStdSessAuthKeyID | read-create | current | The authentication key ID in use for this session. This object permits multiple keys to be active simultaneously. When zxAnBfdStdSessAuthPresFlag is false(2), … |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.33 | ColumnzxAnBfdStdSessAuthKey | read-create | current | The authentication key. When the zxAnBfdStdSessAuthType is simplePassword(1), the value of this object is the password present in the BFD packets. When the zxA… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.34 | ColumnzxAnBfdStdSessIpAddrType | read-create | current | This object specifies IP address type of the local IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1), ipv6(2), or ipv6… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.35 | ColumnzxAnBfdStdSessIpAddr | read-create | current | This object specifies the local IP address which is being monitored with this BFD session. It can also be used to enabled BFD on a specific interface. The valu… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.36 | ColumnzxAnBfdStdSessAppType | read-create | current | The application Type used for this BFD session. |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.60 | ColumnzxAnBfdStdSessStorType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.4.1.3902.1015.16.1.2.1.61 | ColumnzxAnBfdStdSessRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.4.1.3902.1015.16.1.3 | TablezxAnBfdStdSessPerfTable | not-accessible | current | This table specifies BFD Session performance counters. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1 | RowzxAnBfdStdSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD Session. zxAnBfdStdCounterDiscontinuityTime is used to indicate potential discontinuity f… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.1 | ColumnzxAnBfdStdSessPerfCtrlPktIn | read-only | current | The total number of BFD control messages received for this BFD session. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.2 | ColumnzxAnBfdStdSessPerfCtrlPktOut | read-only | current | The total number of BFD control messages sent for this BFD session. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.3 | ColumnzxAnBfdStdSessPerfCtrlPktDrop | read-only | current | The total number of BFD control messages received for this session yet dropped for being invalid. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.4 | ColumnzxAnBfdStdSessPerfCtrlPktDLT | read-only | current | The value of sysUpTime on the most recent occasion at which received BFD control message for this session was dropped. If no such up event exists, this object … |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.5 | ColumnzxAnBfdStdSessPerfEchoPktIn | read-only | current | The total number of BFD echo messages received for this BFD session. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.6 | ColumnzxAnBfdStdSessPerfEchoPktOut | read-only | current | The total number of BFD echo messages sent for this BFD session. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.7 | ColumnzxAnBfdStdSessPerfEchoPktDrop | read-only | current | The total number of BFD echo messages received for this session yet dropped for being invalid. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.8 | ColumnzxAnBfdStdSessPerfEchoPktDLT | read-only | current | The value of sysUpTime on the most recent occasion at which received BFD echo message for this session was dropped. If no such up event exists, this object con… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.9 | ColumnzxAnBfdStdSessUpTime | read-only | current | The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.10 | ColumnzxAnBfdStdSessPerfLastSessDT | read-only | current | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object con… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.11 | ColumnzxAnBfdStdSessPerfLastCommLDC | read-only | current | The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.12 | ColumnzxAnBfdStdSessPerfSessUpCount | read-only | current | The number of times this session has gone into the Up state since the system last rebooted. |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.13 | ColumnzxAnBfdStdSessPerfDiscTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the spe… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.14 | ColumnzxAnBfdStdSessPerfCtrlPktInHC | read-only | current | This value represents the total number of BFD control messages received for this BFD session. It MUST be equal to the least significant 32 bits of zxAnBfdStdSe… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.15 | ColumnzxAnBfdStdSessPerfCtrlPktOutHC | read-only | current | This value represents the total number of total number of BFD control messages transmitted for this BFD session. It MUST be equal to the least significant 32 b… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.16 | ColumnzxAnBfdStdSessPerfCtrlPktDropHC | read-only | current | This value represents the total number of BFD control messages received for this BFD session yet dropped for being invalid. It MUST be equal to the least signi… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.17 | ColumnzxAnBfdStdSessPerfEchoPktInHC | read-only | current | This value represents the total number of BFD echo messages received for this BFD session. It MUST be equal to the least significant 32 bits of zxAnBfdStdSessP… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.18 | ColumnzxAnBfdStdSessPerfEchoPktOutHC | read-only | current | This value represents the total number of total number of BFD echo messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits… |
| 1.3.6.1.4.1.3902.1015.16.1.3.1.19 | ColumnzxAnBfdStdSessPerfEchoPktDropHC | read-only | current | This value represents the total number of BFD echo messages received for this BFD session yet dropped for being invalid. It MUST be equal to the least signific… |
| 1.3.6.1.4.1.3902.1015.16.1.4 | TablezxAnBfdStdSessDiscMapTable | not-accessible | current | The BFD Session Discriminator Mapping Table maps a local discriminator value to associated BFD sessions' ZxAnBfdStdSessIndexTC used in the zxAnBfdStdSessionTab… |
| 1.3.6.1.4.1.3902.1015.16.1.4.1 | RowzxAnBfdStdSessDiscMapEntry | not-accessible | current | The BFD Session Discriminator Map Entry describes BFD session that is mapped to this ZxAnBfdStdSessIndexTC. |
| 1.3.6.1.4.1.3902.1015.16.1.4.1.1 | ColumnzxAnBfdStdSessDiscIndex | not-accessible | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.3902.1015.16.1.4.1.2 | ColumnzxAnBfdStdSessDiscMapIndex | read-only | current | This object specifies the zxAnBfdStdIndex referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the zxAnBfdStdSes… |
| 1.3.6.1.4.1.3902.1015.16.1.5 | TablezxAnBfdStdSessIpMapTable | not-accessible | current | The BFD Session IP Mapping Table maps given zxAnBfdStdSessInterface, zxAnBfdStdSessPeerIpAddrType, and zxAnBfdStdSessPeerIpAddr to an associated BFD sessions' … |
| 1.3.6.1.4.1.3902.1015.16.1.5.1 | RowzxAnBfdStdSessIpMapEntry | not-accessible | current | The BFD Session IP Map Entry describes BFD session that is mapped to this ZxAnBfdStdSessIndexTC. |
| 1.3.6.1.4.1.3902.1015.16.1.5.1.1 | ColumnzxAnBfdStdSessIfIndex | not-accessible | current | This object contains an interface index used to indicate the interface which this BFD session is running on. This value can be zero if there is no interface as… |
| 1.3.6.1.4.1.3902.1015.16.1.5.1.2 | ColumnzxAnBfdStdSessPeerIpAddressType | not-accessible | current | This object specifies IP address type of the neighboring IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1), ipv6(2), o… |
| 1.3.6.1.4.1.3902.1015.16.1.5.1.3 | ColumnzxAnBfdStdSessPeerIpAddress | not-accessible | current | This object specifies the neighboring IP address which is being monitored with this BFD session. It can also be used to enabled BFD on a specific interface. Th… |
| 1.3.6.1.4.1.3902.1015.16.1.5.1.4 | ColumnzxAnBfdStdSessIpMapIndex | read-only | current | This object specifies the zxAnBfdStdIndex referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the zxAnBfdStdSes… |
| 1.3.6.1.4.1.3902.1015.16.2 | NodezxAnBfdStdConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ZxAnBfdStdDiag | INTEGER { controlDetectionTimeExpired(1), echoFunctionFailed(2), neighborSignaledSessionDown(3), forwardingPlaneReset(4), pathDown(5), concatenatedPathDown(6), administrativelyDown(7), reverseConcatenatedPathDown(8), noDiagnostic(99) } | current | A common BFD diagnostic code. |
| ZxAnBfdStdInterval | Unsigned32 (0..4294967295) | current | The BFD interval delay in microseconds. |
| ZxAnBfdStdMultiplier | Unsigned32 (1..255) | current | The BFD failure detection multiplier. |
| ZxAnBfdStdSessIndexTC | Unsigned32 (1..4294967295) | current | An index used to uniquely identify BFD sessions. |