ZTE-AN-CFM-MIB
101 objects
This MIB defines Description of zte ethernet OAM managed objects.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.62 | IdentityzxAnCfmMib | This MIB defines Description of zte ethernet OAM managed objects. | ||
| 1.3.6.1.4.1.3902.1015.62.1 | NodezxAnCfmObjects | |||
| 1.3.6.1.4.1.3902.1015.62.1.1 | NodezxAnCfmGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.62.1.1.1 | ScalarzxAnCfmEnable | read-create | current | Enabled or disabled the CFM functions. |
| 1.3.6.1.4.1.3902.1015.62.1.2 | NodezxAnCfmMa | |||
| 1.3.6.1.4.1.3902.1015.62.1.2.1 | TablezxAnCfmMaNetTable | not-accessible | current | The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the … |
| 1.3.6.1.4.1.3902.1015.62.1.2.1.1 | RowzxAnCfmMaNetEntry | not-accessible | current | The MA table entry. |
| 1.3.6.1.4.1.3902.1015.62.1.2.1.1.1 | ColumnzxAnCfmMaNetCcmDaType | read-create | current | Indicates the type of CCM DA(destination MAC address), which should be unicast or multicastclass1. |
| 1.3.6.1.4.1.3902.1015.62.1.2.1.1.2 | ColumnzxAnCfmMaProtect | read-create | current | Indicates the type of CCM DA(destination MAC address), which should be unicast or multicastclass1. |
| 1.3.6.1.4.1.3902.1015.62.1.2.1.1.3 | ColumnzxAnCfmMaTunnel | read-create | current | |
| 1.3.6.1.4.1.3902.1015.62.1.3 | NodezxAnCfmMep | |||
| 1.3.6.1.4.1.3902.1015.62.1.3.1 | TablezxAnCfmMepTable | not-accessible | current | CFM Mep Table |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1 | RowzxAnCfmMepEntry | not-accessible | current | CFM Mep Entry |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.1 | ColumnzxAnCfmMepCcCheckEnable | read-create | current | Enabled or disabled the CCM frame defect checking. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.2 | ColumnzxAnCfmMepLmEnable | read-create | current | Enabled or disabled the ETH-LM functions. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.3 | ColumnzxAnCfmMepDmEnable | read-create | current | Enabled or disabled the ETH-DM functions. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.4 | ColumnzxAnCfmMepLbmTestType | read-create | current | Indicates the type of ETH-LBM is unicast or multicast. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.5 | ColumnzxAnCfmMepLbmAppType | read-create | current | Indicates the app type of ETH-LBM, which means to verify bidirectional connectivity of a MEP with a MIP or a peer MEP, or to perform a bidirectional in-service… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.6 | ColumnzxAnCfmMepLmTargetMacAddress | read-create | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepLmTargetIsM… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.7 | ColumnzxAnCfmMepLmTargetMepId | read-create | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.8 | ColumnzxAnCfmMepLmTargetIsMepId | read-create | current | True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used … |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.9 | ColumnzxAnCfmMepLmmDaType | read-create | current | Indicates the da type of LMM. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.10 | ColumnzxAnCfmMepLmEndType | read-create | current | Indicates the end type of ETH-LM, which should be one-ended or two-ended. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.11 | ColumnzxAnCfmMepLmInterval | read-create | current | The interval at which LMMs are sent by a MEP, the default value is 5 seconds. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.12 | ColumnzxAnCfmMepLmDuration | read-create | current | The time of duration of ETH-LM test, the default value is 60 seconds. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.13 | ColumnzxAnCfmMepLmPriority | read-create | current | The priority value for LMMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VI… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.14 | ColumnzxAnCfmMepLmFarendLoss | read-only | current | The number of far-end frame loss. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.15 | ColumnzxAnCfmMepLmNearendLoss | read-only | current | The number of near-end frame loss. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.16 | ColumnzxAnCfmMepLmLossRatio | read-only | current | The near-end frame loss ratio in percent. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.17 | ColumnzxAnCfmMepLmStatus | read-create | current | A Boolean flag set to true by the MEP LM Initiator State Machine or an MIB manager to indicate that another LM is being transmitted. Reset to false by the MEP … |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.18 | ColumnzxAnCfmMepLmResultOk | read-only | current | Indicates the result of the operation: - true The Loss Measurement Message(s) will be (or has been) sent. - false The Loss Measurement Message(s) will not be s… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.19 | ColumnzxAnCfmMepLmFarendLossRatio | read-only | current | The far-end frame loss ratio in percent. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.30 | ColumnzxAnCfmMepDmTargetMacAddress | read-create | current | The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column dot1agCfmMepDmTargetIsM… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.31 | ColumnzxAnCfmMepDmTargetMepId | read-create | current | An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Associ… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.32 | ColumnzxAnCfmMepDmTargetIsMepId | read-create | current | True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used … |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.33 | ColumnzxAnCfmMep1dmDaType | read-create | current | The da type of 1DM. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.34 | ColumnzxAnCfmMepDdmDaType | read-create | current | The da type of DDM. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.35 | ColumnzxAnCfmMepDmWayType | read-create | current | The DM way type. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.36 | ColumnzxAnCfmMepDmInterval | read-create | current | The interval at which DMMs are sent by a MEP, the default value is 5 seconds. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.37 | ColumnzxAnCfmMepDmDuration | read-create | current | The time of duration of ETH-DM test, the default value is 60 seconds. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.38 | ColumnzxAnCfmMepDmPriority | read-create | current | The priority value for DMMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VI… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.39 | ColumnzxAnCfmMepDmOneWayAvgDelay | read-only | current | The number of One-way Frame Delay. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.40 | ColumnzxAnCfmMepDmOneWayAvgDv | read-only | current | The number of One-way Frame Delay variation. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.41 | ColumnzxAnCfmMepDmTwoWayAvgDelay | read-only | current | The number of Two-way Frame Delay. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.42 | ColumnzxAnCfmMepDmTwoWayAvgDv | read-only | current | The number of Two-way Frame Delay variation. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.43 | ColumnzxAnCfmMepDmStatus | read-create | current | A Boolean flag set to true by the MEP DM Initiator State Machine or an MIB manager to indicate that another LBM is being transmitted. Reset to false by the MEP… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.44 | ColumnzxAnCfmMepDmResultOk | read-only | current | Indicates the result of the operation: - true The Delay Measurement Message(s) will be (or has been) sent. - false The Delay Measurement Message(s) will not be… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.54 | ColumnzxAnCfmMepTestTlvLength | read-create | current | The length of test TLV. This object can be used if the value of the column zxAnCfmMepTestTlvEnable is 'enable'. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.55 | ColumnzxAnCfmMepTestEnable | read-create | current | Enabled or disabled the ETH-Test functions. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.56 | ColumnzxAnCfmMepTestAppType | read-create | current | Indicates the app type of ETH-Test, which means to perform a bidirectional in-service or out-of-service diagnostics test between a pair of peer MEPs. This incl… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.57 | ColumnzxAnCfmMepTestDestMacAddress | read-create | current | The destination MAC address field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column zxAnCfmMepTestDest… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.58 | ColumnzxAnCfmMepTestDestMepId | read-create | current | The maintenance association end point identifier of another MEP in the same maintenance association to which the ETH-Test message is to be sent. This address w… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.59 | ColumnzxAnCfmMepTestDestIsMepId | read-create | current | True indicates that MEPID of the destination MEP is used for ETH-Test transmission. False indicates that unicast destination MAC address of the target MEP is u… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.60 | ColumnzxAnCfmMepTestInterval | read-create | current | The interval value for ETH-Test messages transmitted by the MEP. the default value is 1000 milliseconds. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.61 | ColumnzxAnCfmMepTestDuration | read-create | current | The time of duration of ETH-Test, the default value is 60 seconds. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.62 | ColumnzxAnCfmMepTestPriority | read-create | current | The priority value for ETH-Test Messages transmitted by the MEP. Default value is the highest priority value allowed to pass through the bridge port for any of… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.63 | ColumnzxAnCfmMepTestDaType | read-create | current | The destination address type of ETH-Test Message. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.64 | ColumnzxAnCfmMepTestTlvEnable | read-create | current | Enabled or disabled ETH-Test TLV. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.65 | ColumnzxAnCfmMepTestPattern | read-create | current | Indicates the test pattern. This pattern will be used if the value of the column zxAnCfmMepTestTlvEnable is 'enable'. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.66 | ColumnzxAnCfmMepTestStatus | read-create | current | A Boolean flag set to true by the MEP TEST initiator state machine or an MIB manager to indicate that another ETH-Test is being done. Reset to false by the MEP… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.67 | ColumnzxAnCfmMepTestResultOk | read-only | current | Indicates the result of the operation: - true The ETH-Test message(s) will be (or has been) sent. - false The ETH-Test message(s) will not be sent. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.68 | ColumnzxAnCfmMepTestMsgSeqNumber | read-only | current | The ETH-Test transaction identifier (zxAnCfmMepTestNextMsgSeqNumber) of the first ETH-Test message(to be) sent. The value returned is undefined if zxAnCfmMepTe… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.69 | ColumnzxAnCfmMepTestNextMsgSeqNumber | read-only | current | Next sequence number/transaction identifier to be sent in a ETH-Test message. This sequence number can be zero because it wraps around. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.70 | ColumnzxAnCfmMepTestTransmitRate | read-only | current | Indicates the maximum transmission rate at which frames with ETH-Test information can be sent. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.71 | ColumnzxAnCfmMepTestFarendLossRatio | read-only | current | The far-end frame loss ratio in percent. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.72 | ColumnzxAnCfmMepTestFarendBitErrRatio | read-only | current | The far-end received bit error ratio in percent. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.87 | ColumnzxAnCfmMepAisEnable | read-create | current | Enabled or disabled the ETH-AIS functions. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.88 | ColumnzxAnCfmMepLckEnable | read-create | current | Enabled or disabled the ETH-LCK functions. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.89 | ColumnzxAnCfmMepAisClientMegLevel | read-create | current | MEG level at which the most immediate client layer MIPs and MEPs exist. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.90 | ColumnzxAnCfmMepLckClientMegLevel | read-create | current | MEG level at which the most immediate client layer MIPs and MEPs exist. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.91 | ColumnzxAnCfmMepAisLckInterval | read-create | current | The interval value for AISMs and LCKMs transmitted by the MEP. the default value is 1 second. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.92 | ColumnzxAnCfmMepAisPriority | read-create | current | The priority value for AISMs transmitted by the MEP. Default value is the highest priority value allowed to pass through the bridge port for any of this MEPs V… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.93 | ColumnzxAnCfmMepLckPriority | read-create | current | The priority value for LCKMs transmitted by the MEP. Default value is the highest priority value allowed to pass through the bridge port for any of this MEPs V… |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.94 | ColumnzxAnCfmMepAisDaType | read-create | current | The destination address type of AISM. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.95 | ColumnzxAnCfmMepLckDaType | read-create | current | The destination address type of LCKM. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.96 | ColumnzxAnCfmMepAisStatus | read-only | current | This object represents if MEP is in AIS status or not. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.97 | ColumnzxAnCfmMepLckStatus | read-only | current | This object represents if MEP is in LCK status or not. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.98 | ColumnzxAnCfmMepLckSendEnable | read-create | current | This object represents if LCK message can be sent by the MEP. |
| 1.3.6.1.4.1.3902.1015.62.1.3.1.1.99 | ColumnzxAnCfmMepRdiStatus | read-only | current | This object represents if MEP is in RDI status or not. |
| 1.3.6.1.4.1.3902.1015.62.1.3.2 | TablezxAnCfmRemoteMepConfTable | not-accessible | current | Remote Mep Config Table |
| 1.3.6.1.4.1.3902.1015.62.1.3.2.1 | RowzxAnCfmRemoteMepConfEntry | not-accessible | current | Remote Mep Config Entry |
| 1.3.6.1.4.1.3902.1015.62.1.3.2.1.1 | ColumnzxAnCfmRemoteMepMacAddress | read-create | current | The MAC address of the remote MEP. |
| 1.3.6.1.4.1.3902.1015.62.1.3.2.1.20 | ColumnzxAnCfmRemoteMepConfRowStatus | read-create | current | The rowstatus of this table. |
| 1.3.6.1.4.1.3902.1015.62.1.3.3 | TablezxAnCfmMipTable | not-accessible | current | CFM Mip Table |
| 1.3.6.1.4.1.3902.1015.62.1.3.3.1 | RowzxAnCfmMipEntry | not-accessible | current | CFM Mip Entry |
| 1.3.6.1.4.1.3902.1015.62.1.3.3.1.1 | ColumnzxAnCfmMipIfIndex | read-create | current | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. … |
| 1.3.6.1.4.1.3902.1015.62.1.3.3.1.20 | ColumnzxAnCfmMipRowStatus | read-create | current | The rowstatus of this table. |
| 1.3.6.1.4.1.3902.1015.62.1.4 | NodezxAnCfmCompatibleObjects | |||
| 1.3.6.1.4.1.3902.1015.62.1.4.1 | ScalarzxAnCfmCompatible | read-only | current | The compatibility of Device. Every bit denotes the compatibility of some function. If the value of the bit is not 1, the related function has compatible proble… |
| 1.3.6.1.4.1.3902.1015.62.1.5 | NodezxAnCfmInterfaceObjects | |||
| 1.3.6.1.4.1.3902.1015.62.1.5.1 | TablezxAnCfmIfTable | not-accessible | current | The CFM interface table. This table specifies CFM interface configuration. |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1 | RowzxAnCfmIfEntry | not-accessible | current | The CFM interface entry. |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1.1 | ColumnzxAnCfmRack | not-accessible | current | Rack number of the port. |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1.2 | ColumnzxAnCfmShelf | not-accessible | current | Shelf number of the port. |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1.3 | ColumnzxAnCfmSlot | not-accessible | current | Slot number of the port. |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1.4 | ColumnzxAnCfmPort | not-accessible | current | The port number. |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1.5 | ColumnzxAnCfmOnu | not-accessible | current | The ONU number. It is 0 in DSL port. |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1.6 | ColumnzxAnCfmIfType | not-accessible | current | Type of the interface. |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1.7 | ColumnzxAnCfmLogicalId | not-accessible | current | Logic index of the interface. If zxAnCfmIfType is 'physicalPort', its value is 0. If zxAnCfmIfType is 'onuUni', this object indicates 'onuSlot.uniId', this typ… |
| 1.3.6.1.4.1.3902.1015.62.1.5.1.1.8 | ColumnzxAnCfmIfOamPduFilterEnable | read-write | current | This object controls whether the Ethernet OAMPDU filtering is enabled on specific interface. A disable(2) value will prevent the Ethernet OAMPDU filtering acti… |
| 1.3.6.1.4.1.3902.1015.62.2 | NodezxAnCfmTrapObjects |