ZTE-AN-ENVMON-MIB
232 objects
This MIB defines zte Access Node managed environment monitor.
Imported Objects
| HC-PerfHist-TC-MIB | HCPerfCurrentCount |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| ZTE-AN-SMI | zxAccessNode zxAnEquipment |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.10.10 | IdentityzxAnEnvMonMib | This MIB defines zte Access Node managed environment monitor. | ||
| 1.3.6.1.4.1.3902.1082.10.10.1 | NodezxAnEnvMonGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.1.1 | ScalarzxAnEnvMonCapabilities | read-only | current | The environment management capabilities of this equipment.The bit value 1 means the function represented by this bit is supported by this equipment. NOTE: Not … |
| 1.3.6.1.4.1.3902.1082.10.10.2 | NodezxAnEnvMonObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.1 | NodezxAnEnvParamObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.1.1 | NodezxAnEnvParamGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.1.1.1 | ScalarzxAnEnvCardShutdownReason | accessible-for-notify | current | The alarm reason of zxAnEnvCardShutdownAlm. envHighTemperature(1): Environment temperature is too high. cardHighTemperature(2):Card self temperature is too hig… |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5 | TablezxAnEnvParamTable | not-accessible | current | This table includes environment temperature information. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1 | RowzxAnEnvParamEntry | not-accessible | current | The entry of zxAnEnvParamTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.1 | ColumnzxAnEnvRack | not-accessible | current | The index of rack. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.2 | ColumnzxAnEnvShelf | not-accessible | current | The index of shelf. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.3 | ColumnzxAnEnvTemp | read-only | current | The temperature of the environment. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.4 | ColumnzxAnEnvTempHighAlmThreshold | read-write | current | The temperature high alarm threshold of the environment. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.5 | ColumnzxAnEnvTempCriticalAlmThreshold | read-only | current | The temperature critical alarm threshold of the environment. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.6 | ColumnzxAnEnvTempLowAlmThreshold | read-write | current | The temperature low alarm threshold of the environment. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.7 | ColumnzxAnEnvShelfPowerConsumption | read-only | current | Power consumption of the shelf. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.8 | ColumnzxAnEnvShelfVoltage | read-only | current | Voltage of the shelf. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.9 | ColumnzxAnEnvShelfCurrent | read-only | current | Current of the shelf. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6 | TablezxAnCardEnvParamTable | not-accessible | current | This table includes card temperature information. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1 | RowzxAnCardEnvParamEntry | not-accessible | current | The entry of zxAnCardEnvParamTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.1 | ColumnzxAnEnvSlot | not-accessible | current | The index of slot, the range is [0,20] of 19-inch shelf and [0,22] of 21-inch shelf. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.2 | ColumnzxAnCardTemp | read-only | current | The current temperature of the card environment. NOTE: 1. In current system, only certain cards support temperature-reading, such as SCXL, GTGOD cards. 2. If t… |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.3 | ColumnzxAnCardPowerConsumption | read-only | current | Power consumption of the card. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.4 | ColumnzxAnCardVoltage | read-only | current | Voltage of the card. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.5 | ColumnzxAnCardCurrent | read-only | current | Current of the card. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.6 | ColumnzxAnCardCriticalTempAlmThreshold | accessible-for-notify | current | The critical temperature alarm threshold of the card. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.7 | ColumnzxAnCardOptHighestTemp | accessible-for-notify | current | The highest temperature of the optical modules in the card. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.8 | ColumnzxAnCardOptCriticalTempAlmThresh | accessible-for-notify | current | The critical optical temperature alarm threshold. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.9 | ColumnzxAnCardOptHighestTempPortNo | accessible-for-notify | current | The port No. which the optical module is located at, and the optical module has the highest temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.10 | ColumnzxAnCardHeatRadiationAlmThresh | accessible-for-notify | current | The heat radiation abnormal alarm threshold of the card. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.11 | ColumnzxAnCardTempHighAccuracy | read-only | current | The high accuracy value of zxAnCardTemp. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.7 | TablezxAnCardEnvHis15MinPerfTable | not-accessible | current | The 15 minutes interval performance data table of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.7.1 | RowzxAnCardEnvHis15MinPerfEntry | not-accessible | current | The 15 minutes interval performance data entry of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.1 | ColumnzxAnCardEnvHis15MinIntervalNo | not-accessible | current | Performance data interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.2 | ColumnzxAnCardEnvHis15MinDateTime | read-only | current | The 15 minutes interval performance data generation time. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.3 | ColumnzxAnCardEnvHis15MinTemp | read-only | current | The 15 minutes interval average temperature of card. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.8 | TablezxAnCardEnvHis1DayPerfTable | not-accessible | current | The 1 day interval performance data table of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.8.1 | RowzxAnCardEnvHis1DayPerfEntry | not-accessible | current | The 1 day interval performance data entry of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.1 | ColumnzxAnCardEnvHis1DayIntervalNo | not-accessible | current | Performance data interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.2 | ColumnzxAnCardEnvHis1DayDateTime | read-only | current | The 1 day interval performance data generation time. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.3 | ColumnzxAnCardEnvHis1DayTemp | read-only | current | The 1 day interval average temperature of card. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9 | TablezxAnCardEnvAlmProfileConfTable | not-accessible | current | The performance alarm threshold profile items configuration table of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1 | RowzxAnCardEnvAlmProfileConfEntry | not-accessible | current | The performance alarm threshold profile items configuration entry of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.1 | ColumnzxAnCardEnvAlmProfileName | not-accessible | current | The performance alarm threshold profile name. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.2 | ColumnzxAnCardEnvPerfVariable | not-accessible | current | The object identifier of performance variables. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.3 | ColumnzxAnCardEnvRiseAlmThresh | read-create | current | The threshold for rising alarm. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.4 | ColumnzxAnCardEnvClrRiseAlmThresh | read-create | current | The threshold for rising alarm restore. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.5 | ColumnzxAnCardEnvRiseWarnThresh | read-create | current | The threshold for rising warning. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.6 | ColumnzxAnCardEnvClrRiseWarnThresh | read-create | current | The threshold for rising warning restore. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.7 | ColumnzxAnCardEnvFallWarnThresh | read-create | current | The threshold for falling warning. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.8 | ColumnzxAnCardEnvClrFallWarnThresh | read-create | current | The threshold for falling warning restore. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.9 | ColumnzxAnCardEnvFallAlmThresh | read-create | current | The threshold for falling alarm. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.10 | ColumnzxAnCardEnvClrFallAlmThresh | read-create | current | The threshold for falling alarm restore. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.50 | ColumnzxAnCardEnvAlmPrfConfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.10 | TablezxAnCardEnvAlmProfileApplyTable | not-accessible | current | The performance alarm threshold profile application table of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.10.1 | RowzxAnCardEnvAlmProfileApplyEntry | not-accessible | current | The performance alarm threshold profile application entry of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.10.1.1 | ColumnzxAnCardEnvAlmPrf | read-create | current | The performance alarm threshold profile. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.10.1.50 | ColumnzxAnCardEnvAlmPrfApplyRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.11 | TablezxAnCardEnvAlmProfileTable | not-accessible | current | The performance alarm threshold profile table of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.11.1 | RowzxAnCardEnvAlmProfileEntry | not-accessible | current | The performance alarm threshold profile entry of card temperature. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.11.1.50 | ColumnzxAnCardEnvAlmPrfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.13 | TablezxAnEnvOverheatProtectTable | not-accessible | current | Environment overheat protection table. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1 | RowzxAnEnvOverheatProtectEntry | not-accessible | current | Environment overheat protection entry. To modify zxAnEnvOverheatProtectEnable from disabled to enabled, zxAnEnvOverheatProtectEnable is mandatory, zxAnEnvOverh… |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.1 | ColumnzxAnEnvOverheatProtectEnable | read-write | current | Enables or disables the environment overheat protection function. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.2 | ColumnzxAnEnvOverheatProtectDelay | read-write | current | The delaying time between two steps. For example, when temperature is higher than the threshold, takes an action as the step 1, and delays the value of zxAnEnv… |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.3 | ColumnzxAnEnvOverheatProtectFirstStep | read-write | current | The first step when the environment temperature exceeds zxAnEnvTempHighAlmThreshold. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.4 | ColumnzxAnEnvOverheatProtectSecondStep | read-write | current | The second step when the environment temperature still exceeds zxAnEnvTempHighAlmThreshold after first step has been done. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.14 | TablezxAnEnvCardOverheatProtectTable | not-accessible | current | Card overheat protection table. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.14.1 | RowzxAnEnvCardOverheatProtectEntry | not-accessible | current | Card overheat protection entry. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.14.1.1 | ColumnzxAnEnvCardCriticalTempProtectEn | read-write | current | Enables or disables the card critical temperature protection function. If it is enabled, the card will be stopped when the card temperature is higher than the … |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.15 | TablezxAnCardEnvHisMinPerfTable | not-accessible | current | The 5 minutes or 15 minutes interval environmental monitoring performance data table of card. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.15.1 | RowzxAnCardEnvHisMinPerfEntry | not-accessible | current | The 5 minutes or 15 minutes interval environmental monitoring performance data entry of card. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.15.1.1 | ColumnzxAnCardEnvHMinIntervalNo | not-accessible | current | The performance data interval number. 1 means the the most recent previous interval; If the performance collection interval is 5 minutes, intervals 2..288 are … |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.15.1.2 | ColumnzxAnCardEnvHMinIntervalValidData | read-only | current | Performance data validity. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.15.1.3 | ColumnzxAnCardEnvHMinDateTime | read-only | current | The 5 minutes or 15 minutes interval performance data generation time. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.15.1.4 | ColumnzxAnCardEnvHMinTemperature | read-only | current | The average temperature of card in the historical 5 minutes or 15 minutes. If the card does not have this attribute, it should be -1000. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.15.1.5 | ColumnzxAnCardEnvHMinVoltage | read-only | current | The average voltage of card in the historical 5 minutes or 15 minutes. If the card does not have this attribute, it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.10.2.1.15.1.6 | ColumnzxAnCardEnvHMinPowerConsumption | read-only | current | The average power consumption of card in the historical 5 minutes or 15 minutes. If the card does not have this attribute, it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.10.2.2 | NodezxAnEnvMonInterfaceObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.2.5 | TablezxAnEnvMonInterfaceTable | not-accessible | current | This table includes the environment interface information. |
| 1.3.6.1.4.1.3902.1082.10.10.2.2.5.1 | RowzxAnEnvMonInterfaceEntry | not-accessible | current | The entry of zxAnEnvMonInterfaceTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.1 | ColumnzxAnEnvMonInterfaceUsage | read-write | current | The equipment type connected to the environment monitor interface. |
| 1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.2 | ColumnzxAnEnvEpmConnectPort | read-write | current | The port no which epm connect |
| 1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.3 | ColumnzxAnEnvBackplaneInterfaceUsage | read-write | current | The equipment type connected to the Backplane Interface. fan(1): the fan connect to the Backplane Interface; noUse(3): not used; noSupport(255):not support. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3 | NodezxAnEnvPowerSupplyObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1 | NodezxAnPowerSupplyGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1.1 | ScalarzxAnEnvEmergencyPowerSaveEnable | read-write | current | Enables or disables the emergency power saving. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1.2 | ScalarzxAnEnvEmergencyPowerSaveDelay | read-write | current | If AC power failure lasts more than zxAnEnvEmergencyPowerSaveDelay, emergency power saving action will be taken. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1.3 | ScalarzxAnEnvEmergencyPowerSaveRecover | read-write | current | If AC power recovered, after this delay, the emergency power save action will be cancelled. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1.4 | ScalarzxAnEnvEmergencyPowerSaveSvcType | read-write | current | The service types will be shut down in emergency power saving action. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1.5 | ScalarzxAnEnvPowerMode | read-write | current | The current power supply mode of the equipment, emergency power saving action is on the basis of the power mode zxAnEnvPowerMode. normal(1) means using AC powe… |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1.6 | ScalarzxAnEnvEmergencyBatteryVoltage | read-only | current | The current voltage of the battery. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1.7 | ScalarzxAnEnvEmergencyBatteryThreshold | read-write | current | The threshold of the battery voltage. If the battery voltage is less than zxAnEnvEmergencyBatteryThreshold, the emergency power saving action will be taken. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.1.8 | ScalarzxAnEnvEnergySavingLevel | read-write | current | level1(1): Level 1 means that the energy saving module action will be taken automatically while the following conditions are detected: 1. There is no card plug… |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.10 | TablezxAnPowerSupplyCapabilityTable | not-accessible | current | This table includes power supply capability table. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.10.1 | RowzxAnPowerSupplyCapabilityEntry | not-accessible | current | The entry of zxAnPowerSupplyCapabilityTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.10.1.1 | ColumnzxAnPowerSupplyMaxPowerNum | read-only | current | The max number of power supply in the equipment. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11 | TablezxAnPowerSupplyTable | not-accessible | current | This table includes power supply table. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1 | RowzxAnPowerSupplyEntry | not-accessible | current | An entry in zxAnPowerSupplyTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.1 | ColumnzxAnPowerSupplyOperStatus | read-only | current | The operational status of the power supply module. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.2 | ColumnzxAnPowerSupplyInVoltage | read-only | current | The actual input volts of the power supply module. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.3 | ColumnzxAnPowerSupplyInVoltageStatus | read-only | current | The volt status of the power supply. normal(1) overVoltage(2) underVoltage(3) off(4)) |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.4 | ColumnzxAnPowerInVoltageUpperThresh | read-write | current | The upper threshold of input volts.The alarm should be generated when zxAnPowerSupplyInVoltage exceeds this threshold. If it is 0, no alarm reported to manager. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.5 | ColumnzxAnPowerInVoltageLowerThresh | read-write | current | The lower threshold of input volts.The alarm should be generated when zxAnPowerSupplyInVoltage is lower than this threshold. If it is 0, no alarm reported to m… |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.6 | ColumnzxAnPowerSupplyInCurrent | read-only | current | The actual current of the power supply module. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.7 | ColumnzxAnPowerInCurrentThresh | read-write | current | The upper threshold of input current.The alarm should be generated when zxAnPowerSupplyInCurrent exceeds this threshold. If it is 0, no alarm reported to manag… |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12 | TablezxAnEnvEnergySavingTable | not-accessible | current | The energy saving status table of the NE. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12.1 | RowzxAnEnvEnergySavingEntry | not-accessible | current | An entry in zxAnEnvEnergySavingTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12.1.1 | ColumnzxAnEnvEnergySavingRack | not-accessible | current | The rack number. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12.1.2 | ColumnzxAnEnvEnergySavingShelf | not-accessible | current | The shelf number. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12.1.3 | ColumnzxAnEnvEnergySavingSlot | not-accessible | current | The slot number. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12.1.4 | ColumnzxAnEnvEnergySavingPort | not-accessible | current | The port number. If the card is power off, this object will be set to 255. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12.1.5 | ColumnzxAnEnvEnergySavingStatus | read-only | current | The energy saving status. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12.1.6 | ColumnzxAnEnvEnergySavingReason | read-only | current | The energy saving reason. |
| 1.3.6.1.4.1.3902.1082.10.10.2.3.12.1.7 | ColumnzxAnEnvEnergySavingOccurringTime | read-only | current | The energy saving occurring time. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4 | NodezxAnEnvFanObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10 | TablezxAnEnvFanTrayTable | not-accessible | current | The Fan Tray Control table, with rack and shelf information. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1 | RowzxAnEnvFanTrayEntry | not-accessible | current | An entry in the zxAnEnvFanTrayTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.1 | ColumnzxAnFanTrayAlarmBeepEnable | read-write | current | The control status of the fan alarm beep. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.2 | ColumnzxAnFanTrayAutoSwitchByCardUp | read-write | current | Enable/disable fan auto switch with card installation. If it is enabled, the fan under the card should be switched to running status when the card is installed… |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.3 | ColumnzxAnFanTrayHardwareVersion | read-only | current | The hardware version of the fan tray |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.4 | ColumnzxAnFanTraySoftwareVersion | read-only | current | The software version of the fan tray |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.5 | ColumnzxAnFanTraySpeedCtrlMode | read-write | current | The speed control mode of the fan. When this value is fixSpeed,zxAnFanTrayAdminStatus, zxAnFanTrayConfSpeedLevel,zxAnEnvFanAdminStatus and zxAnEnvFanConfSpeedL… |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.6 | ColumnzxAnFanTrayLowSpeed | read-write | current | The speed value of the fan's low speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has d… |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.7 | ColumnzxAnFanTrayStdSpeed | read-write | current | The speed value of the fan's standard speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe … |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.8 | ColumnzxAnFanTrayHighSpeed | read-write | current | The speed value of the fan's high speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has … |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.9 | ColumnzxAnFanTraySuperSpeed | read-write | current | The speed value of the fan's super speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has… |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.10 | ColumnzxAnFanTrayLowSpeedShiftTemp | read-write | current | The temperature to activate the fan tray to shift to the low speed level. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.11 | ColumnzxAnFanTrayStdSpeedShiftTemp | read-write | current | The temperature to activate the fan tray to shift to the standard speed level. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.12 | ColumnzxAnFanTrayHighSpeedShiftTemp | read-write | current | The temperature to activate the fan tray to shift to the high speed level. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.13 | ColumnzxAnFanTraySuperSpeedShiftTemp | read-write | current | The temperature to activate the fan tray to shift to the super speed level. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.14 | ColumnzxAnFanTrayLowSpeedPercent | read-write | current | The percentage of speed of the low speed level. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.15 | ColumnzxAnFanTrayStdSpeedPercent | read-write | current | The percentage of speed of the standard speed level. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.16 | ColumnzxAnFanTrayHighSpeedPercent | read-write | current | The percentage of speed of the high speed level. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.17 | ColumnzxAnFanTraySuperSpeedPercent | read-write | current | The percentage of speed of the super speed level. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.18 | ColumnzxAnFanTrayAdminStatus | read-write | current | The administrative status of the fan tray. When zxAnFanTrayAdminStatus is configured, all the zxAnEnvFanAdminStatus values are consistent with zxAnFanTrayAdmin… |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.19 | ColumnzxAnFanTrayConfSpeedLevel | read-write | current | The configured speed level of the fan tray. When zxAnFanTrayConfSpeedLevel is configured, all the zxAnEnvFanConfSpeedLevel values are consistent with zxAnFanTr… |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.20 | ColumnzxAnFanTrayPowerConsumption | read-only | current | Power consumption of the fan tray. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.21 | ColumnzxAnFanTraySn | read-write | current | The serial number of fan tray. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.22 | ColumnzxAnFanTrayVoltage | read-only | current | Voltage of the fan tray. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.23 | ColumnzxAnFanTrayCurrent | read-only | current | Current of the fan tray. Value 0 means not available. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.24 | ColumnzxAnFanTrayTemp | read-only | current | The temperature of the fan tray. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11 | TablezxAnEnvFanTable | not-accessible | current | This table includes speed information and operational status of the fan units. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1 | RowzxAnEnvFanEntry | not-accessible | current | The entry of zxAnEnvFanTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.1 | ColumnzxAnEnvFanIndex | not-accessible | current | The index of this fan unit. For 19-inch shelf, there are 3 fans in each fan tray. The fan index should be integer in [1,3]. For 21-inch shelf, there are 4 fans… |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.2 | ColumnzxAnEnvFanConfSpeedLevel | read-write | current | The configured speed level of the fan unit singly. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.3 | ColumnzxAnEnvFanActualSpeedLevel | read-only | current | The actual speed level of the fan unit. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.4 | ColumnzxAnEnvFanAdminStatus | read-write | current | The administrative status of the fan unit singly. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.5 | ColumnzxAnEnvFanOperStatus | read-only | current | The operational status of the fan unit. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.6 | ColumnzxAnEnvFanOnlineStatus | read-only | current | The actual online status of the fan unit. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.7 | ColumnzxAnEnvFanActualSpeed | read-only | current | The actual speed of the fan unit. NOTE: If not supported, NMS should use the speed value of zxAnEnvFanActualSpeedLevel. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.12 | NodezxAnEnvFanTrayResetObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.4.12.1 | ScalarzxAnEnvFanTrayResetRack | read-write | current | The rack number of the fan tray. |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.12.2 | ScalarzxAnEnvFanTrayResetShelfList | read-write | current | The shelf number list of the fan tray. They can be reset in batch, for example: 1,2,3. Setting this object to empty means all the fan trays connected with zxAn… |
| 1.3.6.1.4.1.3902.1082.10.10.2.4.12.3 | ScalarzxAnEnvFanTrayResetAction | read-write | current | Reset the fan trays. To query this object, always return 1. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5 | NodezxAnEnvDeviceObjects | |||
| 1.3.6.1.4.1.3902.1082.10.10.2.5.2 | TablezxAnEnvDeviceTable | not-accessible | current | The table of environment device. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.2.1 | RowzxAnEnvDeviceEntry | not-accessible | current | The entry of the zxAnEnvDeviceTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.1 | ColumnzxAnEnvDeviceId | not-accessible | current | The ID of this environment device. Value 1-50 is default value which can not be modified or deleted. If add a new device, the ID will be starting from 51. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.2 | ColumnzxAnEnvDeviceName | read-create | current | The name of the environment device. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.50 | ColumnzxAnEnvDeviceRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.3 | TablezxAnEnvDevMonSwitchTable | not-accessible | current | The table of the switch which monitors environment device. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1 | RowzxAnEnvDevMonSwitchEntry | not-accessible | current | The entry of the zxAnEnvDevMonSwitchTable. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.1 | ColumnzxAnEnvDevMonSwitchId | not-accessible | current | The ID of the switch. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.2 | ColumnzxAnEnvDevMonSwitchDeviceId | read-write | current | The ID of the device which monitored by the switch. Value 0 means this switch does not monitor any device. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.3 | ColumnzxAnEnvDevMonSwitchTrapEnable | read-write | current | Enables or disables the environment device abnormal trap. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.4 | ColumnzxAnEnvDevMonSwitchNormalStatus | read-write | current | The normal status of the environment device. |
| 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.5 | ColumnzxAnEnvDevMonSwitchCurrStatus | read-only | current | The current status of the environment device. |
| 1.3.6.1.4.1.3902.1082.10.10.3 | NodezxAnEnvMonNotifications | |||
| 1.3.6.1.4.1.3902.1082.10.10.3.1 | NodezxAnEnvMonTempTraps | |||
| 1.3.6.1.4.1.3902.1082.10.10.3.1.1 | NotificationzxAnEnvHighTempAlm | current | The environment temperature has exceeded high temperature threshold zxAnEnvTempHighAlmThreshold. The zxAnEnvTemp object identifies the current temperature. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.2 | NotificationzxAnEnvHighTempClr | current | The environment temperature has returned to normal operating temperature from zxAnEnvTempHighAlmThreshold. The zxAnEnvTemp object identifies the current temper… | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.5 | NotificationzxAnEnvTempSensorFailure | current | It indicates that the temperature sensor is in fault. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.6 | NotificationzxAnEnvCriticalTempAlm | current | The environment temperature has exceeded critical temperature threshold zxAnEnvTempCriticalAlmThreshold. The zxAnEnvTemp object identifies the current temperat… | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.7 | NotificationzxAnEnvCriticalTempClr | current | The environment temperature has returned to normal operating temperature from zxAnEnvTempCriticalAlmThreshold. The zxAnEnvTemp object identifies the current te… | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.8 | NotificationzxAnEnvLowTempAlm | current | The environment temperature is below low temperature threshold zxAnEnvTempLowAlmThreshold. The zxAnEnvTemp object identifies the current temperature. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.9 | NotificationzxAnEnvLowTempClr | current | The environment temperature has returned to normal operating temperature from zxAnEnvTempLowAlmThreshold. The zxAnEnvTemp object identifies the current tempera… | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.30 | NotificationzxAnEnvCardShutdownAlm | current | A zxAnEnvCardShutdownAlm trap is sent when the card has been shut down because agent has detected that the temperature is too high or the AC power is failure a… | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.31 | NotificationzxAnEnvCardShutdownClr | current | A zxAnEnvCardShutdownClr trap is sent when the card temperature becomes normal, or the environment temperature becomes normal, or the chip temperature becomes … | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.32 | NotificationzxAnEnvTemperatureAbnormalAlm | current | In temperature control mode, a zxAnEnvTemperatureAbnormalAlm trap is sent when the environment temperature can't be read. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.33 | NotificationzxAnEnvTemperatureAbnormalClr | current | A zxAnEnvTemperatureAbnormalClr trap is sent when the zxAnEnvTemperatureAbnormalAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.34 | NotificationzxAnEnvNearCriticalTempAlm | current | A zxAnEnvNearCriticalTempAlm trap is sent when the environment temperature is close to the environment critical temperature alarm threshold. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.35 | NotificationzxAnEnvNearCriticalTempClr | current | A zxAnEnvNearCriticalTempClr trap is sent when the zxAnEnvNearCriticalTempAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.36 | NotificationzxAnEnvCardNearCriticalTempAlm | current | A zxAnEnvCardNearCriticalTempAlm trap is sent when the card temperature is close to the card critical temperature alarm threshold. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.37 | NotificationzxAnEnvCardNearCriticalTempClr | current | A zxAnEnvCardNearCriticalTempClr trap is sent when the zxAnEnvCardNearCriticalTempAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.38 | NotificationzxAnEnvOptNearCriticalTempAlm | current | A zxAnEnvOptNearCriticalTempAlm trap is sent when the optical module temperature is close to the optical module critical temperature alarm threshold. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.39 | NotificationzxAnEnvOptNearCriticalTempClr | current | A zxAnEnvOptNearCriticalTempClr trap is sent when the zxAnEnvOptNearCriticalTempAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.40 | NotificationzxAnEnvHeatRadiationAbnormalAlm | current | A zxAnEnvHeatRadiationAbnormalAlm trap is sent when the temperature difference between the card and the environment exceeds the zxAnCardHeatRadiationAlmThresh. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.1.41 | NotificationzxAnEnvHeatRadiationAbnormalClr | current | A zxAnEnvHeatRadiationAbnormalClr trap is sent when the zxAnEnvHeatRadiationAbnormalAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.2 | NodezxAnEnvMonInterfaceTraps | |||
| 1.3.6.1.4.1.3902.1082.10.10.3.2.1 | NotificationzxAnEnvMonitorInterfaceLinkDown | current | It indicates that the agent has detected that the link at the environment monitoring interface has been down. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.2.2 | NotificationzxAnEnvMonitorInterfaceLinkUp | current | It indicates that the agent has detected that the link at the environment monitoring interface has been up. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3 | NodezxAnEnvMonPowerSupplyTraps | |||
| 1.3.6.1.4.1.3902.1082.10.10.3.3.1 | NotificationzxAnEnvPowerSupplyModuleDown | current | It indicates that the power supply module is down. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.2 | NotificationzxAnEnvPowerSupplyModuleUp | current | It indicates that the power supply module is up. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.3 | NotificationzxAnEnvPowerOverVoltageAlm | current | It indicates that the input voltage of power supply is over-voltage. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.4 | NotificationzxAnEnvPowerOverVoltageClr | current | It indicates that the over-voltage fault is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.5 | NotificationzxAnEnvPowerUnderVoltageAlm | current | It indicates that the input voltage of power supply is under-voltage. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.6 | NotificationzxAnEnvPowerUnderVoltageClr | current | It indicates that the under-voltage fault is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.7 | NotificationzxAnEnvPowerOff | current | It indicates that the power supply is off. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.8 | NotificationzxAnEnvPowerOn | current | It indicates that the power supply off fault is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.9 | NotificationzxAnEnvEmergencyPowerSaveAlm | current | The current power supply switches to storage battery, the emergency power saving action has been taken. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.10 | NotificationzxAnEnvEmergencyPowerSaveClr | current | The current power supply switches to normal AC power. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.11 | NotificationzxAnEnvACPowerDownAlm | current | A zxAnEnvACPowerDownAlm trap is sent when the agent detects no AC power input. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.12 | NotificationzxAnEnvACPowerDownClr | current | A zxAnEnvACPowerDownClr trap is sent when the agent detects AC power input. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.13 | NotificationzxAnEnvNoBatteryAlm | current | A zxAnEnvNoBatteryAlm trap is sent when no battery found by the agent. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.14 | NotificationzxAnEnvNoBatteryClr | current | A zxAnEnvNoBatteryClr trap is sent when the battery has been found by the agent. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.15 | NotificationzxAnEnvBatteryUnderVoltageAlm | current | A zxAnEnvBatteryUnderVoltageAlm trap is sent when the battery voltage is under-voltage. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.3.16 | NotificationzxAnEnvBatteryUnderVoltageClr | current | A zxAnEnvBatteryUnderVoltageClr trap is sent when the battery voltage becomes normal. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.4 | NodezxAnEnvMonFanTraps | |||
| 1.3.6.1.4.1.3902.1082.10.10.3.4.1 | NotificationzxAnEnvFanLinkDown | current | It indicates that the agent has detected that fan is offline. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.4.2 | NotificationzxAnEnvFanLinkUp | current | It indicates that the agent has detected that fan is online. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.4.3 | NotificationzxAnEnvFanTrayLinkDown | current | It indicates that the agent has detected that the link at the fan card interface has been down. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.4.4 | NotificationzxAnEnvFanTrayLinkUp | current | It indicates that the agent has detected that the link at the fan card interface has been up. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.4.5 | NotificationzxAnEnvFanFailureAlm | current | It indicates that the fan is in fault. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.4.6 | NotificationzxAnEnvFanFailureClr | current | It indicates that the fan's fault is cleared. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.5 | NodezxAnEnvDeviceTraps | |||
| 1.3.6.1.4.1.3902.1082.10.10.3.5.1 | NotificationzxAnEnvDeviceAbnormalAlm | current | A zxAnEnvDeviceAbnormalAlm trap is sent when the current status of environment device is inconsistent with normal status. | |
| 1.3.6.1.4.1.3902.1082.10.10.3.5.2 | NotificationzxAnEnvDeviceAbnormalClr | current | A zxAnEnvDeviceAbnormalClr trap is sent when current status of environment device is consistent with normal status. | |
| 1.3.6.1.4.1.3902.1082.10.10.4 | NodezxAnEnvMonConformance | |||
| 1.3.6.1.4.1.3902.1082.10.10.4.1 | NodezxAnEnvMonCompliances | |||
| 1.3.6.1.4.1.3902.1082.10.10.4.1.1 | CompliancezxAnEnvMonCompliance | current | The compliance statement for SNMP entities which implement the ZTE-AN-ENVMON-MIB. | |
| 1.3.6.1.4.1.3902.1082.10.10.4.2 | NodezxAnEnvMonGroups | |||
| 1.3.6.1.4.1.3902.1082.10.10.4.2.1 | GroupzxAnEnvMonCapabilitiesGroup | current | The collection of objects which are used to represent environment management capabilities of this equipment. The bit value 1 means the function represented by … | |
| 1.3.6.1.4.1.3902.1082.10.10.4.2.2 | GroupzxAnEnvTempGroup | current | The collection of objects which are used to represent the temperature information of this equipment/card and to set the temperature alarm threshold of the envi… | |
| 1.3.6.1.4.1.3902.1082.10.10.4.2.3 | GroupzxAnEnvCardTempGroup | current | The collection of objects which are used to represent temperature performance of the card environment. | |
| 1.3.6.1.4.1.3902.1082.10.10.4.2.4 | GroupzxAnEnvInterfaceGroup | current | The collection of objects which are used to represent the interface connection of the equipment. | |
| 1.3.6.1.4.1.3902.1082.10.10.4.2.5 | GroupzxAnEnvPowerSupplyGroup | current | The collection of objects which are used to provide power management functions, include power count and the voltage status of the power supply. | |
| 1.3.6.1.4.1.3902.1082.10.10.4.2.6 | GroupzxAnEnvFanTrayTableGroup | current | The collection of objects which are used to provide fan management functions, include setting the speed control mode and the percentage of speed of the differe… | |
| 1.3.6.1.4.1.3902.1082.10.10.4.2.7 | GroupzxAnEnvFanTableGroup | current | The collection of objects which are used to provide the speed information and operational status of the fan. | |
| 1.3.6.1.4.1.3902.1082.10.10.4.2.8 | GroupzxAnEnvMonNotificationsGroup | current | The notifications which indicate specific changes, include temperature, fan status, power status and gpon card status. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ZxAnEnvShutdownServiceType | BITS { xpon(0), xdsl(1), p2p(2), narrowband(3) } | current | A set of service type defined in environment monitor module that may be shut down in protection action, each bit refers to a type: Bit 00 : xPON service. Bit 01 : xDSL service. Bit 02 : P2P service. Bit 03 : narrowband … |