ZTE-AN-ETH-EFM-MIB
80 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.61 | NodezxAnEthOamObjects | |||
| 1.3.6.1.4.1.3902.1015.61.1 | TablezxAnEthOamTable | not-accessible | current | This table contains the primary controls and status for the OAM capabilities of an Ethernet like interface. There will be one row in this table for each Ethern… |
| 1.3.6.1.4.1.3902.1015.61.1.1 | RowzxAnEthOamEntry | not-accessible | current | An entry in the table, containing information on the Ethernet OAM function for a single Ethernet like interface. Entries in the table are created automatically… |
| 1.3.6.1.4.1.3902.1015.61.1.1.1 | ColumnzxAnEthOamAdminState | read-write | current | This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. Th… |
| 1.3.6.1.4.1.3902.1015.61.1.1.2 | ColumnzxAnEthOamOperStatus | read-only | current | At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may… |
| 1.3.6.1.4.1.3902.1015.61.1.1.3 | ColumnzxAnEthOamMode | read-write | current | This object configures the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These … |
| 1.3.6.1.4.1.3902.1015.61.1.1.4 | ColumnzxAnEthOamMaxOamPduSize | read-only | current | The largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes be… |
| 1.3.6.1.4.1.3902.1015.61.1.1.5 | ColumnzxAnEthOamConfigRevision | read-only | current | The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate … |
| 1.3.6.1.4.1.3902.1015.61.1.1.6 | ColumnzxAnEthOamFunctionsSupported | read-only | current | The OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always requir… |
| 1.3.6.1.4.1.3902.1015.61.1.1.7 | ColumnzxAnEthOamHardwareInfo | read-only | current | A textual description of hardware info. |
| 1.3.6.1.4.1.3902.1015.61.1.1.8 | ColumnzxAnEthOamSoftwareInfo | read-only | current | A textual description of software info. |
| 1.3.6.1.4.1.3902.1015.61.2 | TablezxAnEthOamPeerTable | not-accessible | current | This table contains information about the OAM peer for a particular Ethernet like interface. OAM entities communicate with a single OAM peer entity on Ethernet… |
| 1.3.6.1.4.1.3902.1015.61.2.1 | RowzxAnEthOamPeerEntry | not-accessible | current | An entry in the table, containing information on the peer OAM entity for a single Ethernet like interface. Note that there is at most one OAM peer for each Eth… |
| 1.3.6.1.4.1.3902.1015.61.2.1.1 | ColumnzxAnEthOamPeerMacAddress | read-only | current | The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU. |
| 1.3.6.1.4.1.3902.1015.61.2.1.2 | ColumnzxAnEthOamPeerVendorOui | read-only | current | The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the … |
| 1.3.6.1.4.1.3902.1015.61.2.1.3 | ColumnzxAnEthOamPeerVendorInfo | read-only | current | The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the… |
| 1.3.6.1.4.1.3902.1015.61.2.1.4 | ColumnzxAnEthOamPeerMode | read-only | current | The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the C… |
| 1.3.6.1.4.1.3902.1015.61.2.1.5 | ColumnzxAnEthOamPeerMaxOamPduSize | read-only | current | The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this inte… |
| 1.3.6.1.4.1.3902.1015.61.2.1.6 | ColumnzxAnEthOamPeerConfigRevision | read-only | current | The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration chang… |
| 1.3.6.1.4.1.3902.1015.61.2.1.7 | ColumnzxAnEthOamPeerFunctionsSupported | read-only | current | The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicate… |
| 1.3.6.1.4.1.3902.1015.61.3 | TablezxAnEthOamLoopbackTable | not-accessible | current | This table contains controls for the loopback state of the local link as well as indicating the status of the loopback function. There is one entry in this tab… |
| 1.3.6.1.4.1.3902.1015.61.3.1 | RowzxAnEthOamLoopbackEntry | not-accessible | current | An entry in the table, containing information on the peer OAM entity for a single Ethernet like interface. Note that there is at most one OAM peer for each Eth… |
| 1.3.6.1.4.1.3902.1015.61.3.1.1 | ColumnzxAnEthOamLoopbackStatus | read-create | current | The loopback status of the OAM entity. This status is determined by a combination of the local parser and multiplexer states, the remote parser and multiplexer… |
| 1.3.6.1.4.1.3902.1015.61.3.1.2 | ColumnzxAnEthOamLoopbackIgnoreRx | read-create | current | Since OAM loopback is a distruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM l… |
| 1.3.6.1.4.1.3902.1015.61.3.1.3 | ColumnzxAnEthOamLoopbackResult | read-only | current | This is loop test result and includes reasons for test failures. |
| 1.3.6.1.4.1.3902.1015.61.3.1.4 | ColumnzxAnEthOamLoopbackSend | read-create | current | The count of packet will be sent in the loopback test. |
| 1.3.6.1.4.1.3902.1015.61.3.1.5 | ColumnzxAnEthOamLoopbackRecv | read-only | current | The count of recived packet in the loopback test. |
| 1.3.6.1.4.1.3902.1015.61.4 | TablezxAnEthOamStatsTable | not-accessible | current | This table contains statistics for the OAM function on a particular Ethernet like interface. There is an entry in the table for every entry in the OamTable. Th… |
| 1.3.6.1.4.1.3902.1015.61.4.1 | RowzxAnEthOamStatsEntry | not-accessible | current | An entry in the table, containing statistics information on the Ethernet OAM function for a single Ethernet like interface. Entries are automatically created f… |
| 1.3.6.1.4.1.3902.1015.61.4.1.1 | ColumnzxAnEthOamInformationTx | read-only | current | A count of the number of Information OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management sy… |
| 1.3.6.1.4.1.3902.1015.61.4.1.2 | ColumnzxAnEthOamInformationRx | read-only | current | A count of the number of Information OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management syste… |
| 1.3.6.1.4.1.3902.1015.61.4.1.3 | ColumnzxAnEthOamUniqueEventNotificationTx | read-only | current | A count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of succes… |
| 1.3.6.1.4.1.3902.1015.61.4.1.4 | ColumnzxAnEthOamUniqueEventNotificationRx | read-only | current | A count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of su… |
| 1.3.6.1.4.1.3902.1015.61.4.1.5 | ColumnzxAnEthOamDuplicateEventNotificationTx | read-only | current | A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability… |
| 1.3.6.1.4.1.3902.1015.61.4.1.6 | ColumnzxAnEthOamDuplicateEventNotificationRx | read-only | current | A count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of… |
| 1.3.6.1.4.1.3902.1015.61.4.1.7 | ColumnzxAnEthOamLoopbackControlTx | read-only | current | A count of the number of Loopback Control OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the manageme… |
| 1.3.6.1.4.1.3902.1015.61.4.1.8 | ColumnzxAnEthOamLoopbackControlRx | read-only | current | A count of the number of Loopback Control OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management … |
| 1.3.6.1.4.1.3902.1015.61.4.1.9 | ColumnzxAnEthOamVariableRequestTx | read-only | current | A count of the number of Variable Request OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the manageme… |
| 1.3.6.1.4.1.3902.1015.61.4.1.10 | ColumnzxAnEthOamVariableRequestRx | read-only | current | A count of the number of Variable Request OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management … |
| 1.3.6.1.4.1.3902.1015.61.4.1.11 | ColumnzxAnEthOamVariableResponseTx | read-only | current | A count of the number of Variable Response OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the managem… |
| 1.3.6.1.4.1.3902.1015.61.4.1.12 | ColumnzxAnEthOamVariableResponseRx | read-only | current | A count of the number of Variable Response OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management… |
| 1.3.6.1.4.1.3902.1015.61.4.1.13 | ColumnzxAnEthOamOrgSpecificTx | read-only | current | A count of the number of Organization Specific OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the man… |
| 1.3.6.1.4.1.3902.1015.61.4.1.14 | ColumnzxAnEthOamOrgSpecificRx | read-only | current | A count of the number of Organization Specific OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the manage… |
| 1.3.6.1.4.1.3902.1015.61.4.1.15 | ColumnzxAnEthOamUnsupportedCodesTx | read-only | current | A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of t… |
| 1.3.6.1.4.1.3902.1015.61.4.1.16 | ColumnzxAnEthOamUnsupportedCodesRx | read-only | current | A count of the number of OAMPDUs received on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the … |
| 1.3.6.1.4.1.3902.1015.61.4.1.17 | ColumnzxAnEthOamFramesLostDueToOam | read-only | current | A count of the number of frames that were dropped by the OAM multiplexer. Since the OAM mulitplexer has multiple inputs and a single output, there may be cases… |
| 1.3.6.1.4.1.3902.1015.61.5 | TablezxAnEthOamEventConfigTable | not-accessible | current | Ethernet OAM includes the ability to generate and receive Event Notification OAMPDUs to indicate various link problems. This table contains the mechanisms to e… |
| 1.3.6.1.4.1.3902.1015.61.5.1 | RowzxAnEthOamEventConfigEntry | not-accessible | current | Entries are automatically created and deleted from this table, and exist whenever the OAM entity supports Ethernet OAM events (as indicated by the eventSupport… |
| 1.3.6.1.4.1.3902.1015.61.5.1.1 | ColumnzxAnEthOamErrSymPeriodWindowHi | read-write | current | The two objects OamErrSymPeriodWindowHi and OamErrSymPeriodLo together form an unsigned 64-bit integer representing the number of symbols over which this thres… |
| 1.3.6.1.4.1.3902.1015.61.5.1.2 | ColumnzxAnEthOamErrSymPeriodWindowLo | read-write | current | The two objects OamErrSymPeriodWindowHi and OamErrSymPeriodWindowLo together form an unsigned 64-bit integer representing the number of symbols over which this… |
| 1.3.6.1.4.1.3902.1015.61.5.1.3 | ColumnzxAnEthOamErrSymPeriodThresholdHi | read-write | current | The two objects OamErrSymPeriodThresholdHi and OamErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors tha… |
| 1.3.6.1.4.1.3902.1015.61.5.1.4 | ColumnzxAnEthOamErrSymPeriodThresholdLo | read-write | current | The two objects OamErrSymPeriodThresholdHi and OamErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors tha… |
| 1.3.6.1.4.1.3902.1015.61.5.1.5 | ColumnzxAnEthOamErrSymPeriodEvNotifEnable | read-write | current | If true, the OAM entity should send an Event Notification OAMPDU when an Errored Symbol Period Event occurs. By default, this object should have the value true… |
| 1.3.6.1.4.1.3902.1015.61.5.1.6 | ColumnzxAnEthOamErrFramePeriodWindow | read-write | current | The number of frames over which the threshold is defined. The default value of the window is the number of minimum size Ethernet frames that can be received ov… |
| 1.3.6.1.4.1.3902.1015.61.5.1.7 | ColumnzxAnEthOamErrFramePeriodThreshold | read-write | current | The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event … |
| 1.3.6.1.4.1.3902.1015.61.5.1.8 | ColumnzxAnEthOamErrFramePeriodEvNotifEnable | read-write | current | If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Period Event occurs. By default, this object should have the value true … |
| 1.3.6.1.4.1.3902.1015.61.5.1.9 | ColumnzxAnEthOamErrFrameWindow | read-write | current | The amount of time (in 100ms increments) over which the threshold is defined. The default value is 10 (1 second). If OamErrFrameThreshold frame errors occur wi… |
| 1.3.6.1.4.1.3902.1015.61.5.1.10 | ColumnzxAnEthOamErrFrameThreshold | read-write | current | The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event … |
| 1.3.6.1.4.1.3902.1015.61.5.1.11 | ColumnzxAnEthOamErrFrameEvNotifEnable | read-write | current | If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Event occurs. By default, this object should have the value true for Eth… |
| 1.3.6.1.4.1.3902.1015.61.5.1.12 | ColumnzxAnEthOamErrFrameSecsSummaryWindow | read-write | current | The amount of time (in 100ms intervals) over which the threshold is defined. The default value is 100 (10 seconds). If OamErrFrameSecsSummaryThreshold frame er… |
| 1.3.6.1.4.1.3902.1015.61.5.1.13 | ColumnzxAnEthOamErrFrameSecsSummaryThreshold | read-write | current | The number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If the threshold value is ze… |
| 1.3.6.1.4.1.3902.1015.61.5.1.14 | ColumnzxAnEthOamErrFrameSecsEvNotifEnable | read-write | current | If true, the local OAM entity should send an Event Notification OAMPDU when an Errored Frame Seconds Event occurs. By default, this object should have the valu… |
| 1.3.6.1.4.1.3902.1015.61.5.1.15 | ColumnzxAnEthOamDyingGaspEnable | read-write | current | If true, the local OAM entity should attempt to indicate a dying gasp via the OAMPDU flags field to its peer OAM entity when a dying gasp event occurs. The exa… |
| 1.3.6.1.4.1.3902.1015.61.5.1.16 | ColumnzxAnEthOamCriticalEventEnable | read-write | current | If true, the local OAM entity should attempt to indicate a critical event via the OAMPDU flags to its peer OAM entity when a critical event occurs. The exact d… |
| 1.3.6.1.4.1.3902.1015.61.6 | TablezxAnEthOamEventLogTable | not-accessible | current | This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in … |
| 1.3.6.1.4.1.3902.1015.61.6.1 | RowzxAnEthOamEventLogEntry | not-accessible | current | An entry in the OamEventLogTable. Entries are automatically created whenever Ethernet OAM events occur at the local OAM entity, and when Event Notification OAM… |
| 1.3.6.1.4.1.3902.1015.61.6.1.1 | ColumnzxAnEthOamEventLogIndex | not-accessible | current | An arbitrary integer for identifiying individual events within the event log. |
| 1.3.6.1.4.1.3902.1015.61.6.1.2 | ColumnzxAnEthOamEventLogTimestamp | read-only | current | The value of sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For rem… |
| 1.3.6.1.4.1.3902.1015.61.6.1.3 | ColumnzxAnEthOamEventLogOui | read-only | current | The OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use… |
| 1.3.6.1.4.1.3902.1015.61.6.1.4 | ColumnzxAnEthOamEventLogType | read-only | current | The type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSym… |
| 1.3.6.1.4.1.3902.1015.61.6.1.5 | ColumnzxAnEthOamEventLogLocation | read-only | current | Whether this event occurred locally (local(1)), or was received from the OAM peer via Ethernet OAM (remote(2)). |
| 1.3.6.1.4.1.3902.1015.61.6.1.6 | ColumnzxAnEthOamEventLogWindowHi | read-only | current | If the event represents a threshold crossing event, the two objects OamEventWindowHi and OamEventWindowLo form an unsigned 64-bit integer yielding the window o… |
| 1.3.6.1.4.1.3902.1015.61.6.1.7 | ColumnzxAnEthOamEventLogWindowLo | read-only | current | If the event represents a threshold crossing event, the two objects OamEventWindowHi and OamEventWindowLo form an unsigned 64-bit integer yielding the window o… |
| 1.3.6.1.4.1.3902.1015.61.6.1.8 | ColumnzxAnEthOamEventLogThresholdHi | read-only | current | If the event represents a threshold crossing event, the two objects OamEventThresholdHi and OamEventThresholdLo form an unsigned 64-bit integer yielding the va… |
| 1.3.6.1.4.1.3902.1015.61.6.1.9 | ColumnzxAnEthOamEventLogThresholdLo | read-only | current | If the event represents a threshold crossing event, the two objects OamEventThresholdHi and OamEventThresholdLo form an unsigned 64-bit integer yielding the va… |
| 1.3.6.1.4.1.3902.1015.61.6.1.10 | ColumnzxAnEthOamEventLogValue | read-only | current | If the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (for exam… |
| 1.3.6.1.4.1.3902.1015.61.6.1.11 | ColumnzxAnEthOamEventLogRunningTotal | read-only | current | Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the… |
| 1.3.6.1.4.1.3902.1015.61.6.1.12 | ColumnzxAnEthOamEventLogEventTotal | read-only | current | Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the… |
| 1.3.6.1.4.1.3902.1015.61.7 | ScalarzxAnEthOamGlobalEnable | read-write | current |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dot3Oui | OCTET STRING(SIZE(3)) | current | 24-bit Organizationally Unique Identifier. Information on OUIs can be found in IEEE 802-2001 [802-2001] Clause 9. |