ZTE-AN-INTERFACE-MIB
536 objects
This MIB defines zte Access Node managed objects.
Imported Objects
| IF-MIB | ifAdminStatus ifIndex ifOperStatus ifType |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| ZTE-AN-TC-MIB | VlanId zxAn ZxAnIdList ZxAnIfindex ZxAnPortList |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.3 | IdentityzxAnInterfaceMib | This MIB defines zte Access Node managed objects. | ||
| 1.3.6.1.4.1.3902.1015.3.1 | NodezxAnInterfaceObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.1 | TablezxAnIfTable | not-accessible | current | This table includes the general interface infomation. |
| 1.3.6.1.4.1.3902.1015.3.1.1.1 | RowzxAnIfEntry | not-accessible | current | An entry in zxAnIfTable. |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.2 | ColumnzxAnIfTxNetDataRate | read-only | current | Current actual data transmition speed at this interface. |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.3 | ColumnzxAnIfRxNetDataRate | read-only | current | Current actual data recieving speed at this interface. |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.4 | ColumnzxAnIfStatCounterAdminStatus | read-only | current | Reset the statistics counter at this interface. |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.5 | ColumnzxAnIfAdminStatus | read-write | current | Operate the interface. lock unlock reset |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.6 | ColumnzxAnIfLastLinkDownTime | read-only | current | The time that the link of interface is down. The format is YYYY-MM-DD HH:MM:SS. eg 2010-07-07 13:15:27 |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.7 | ColumnzxAnIfLastLinkUpTime | read-only | current | The time that the link of interface is up. The format is YYYY-MM-DD HH:MM:SS. eg 2010-07-07 13:15:27 |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.8 | ColumnzxAnIfFwdFloodBpduPacketEnable | read-write | current | Enable or disable the ethernet switch forward flood BPDU packet at this interface. |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.9 | ColumnzxAnIfFwdFloodGarpPacketEnable | read-write | current | Enable or disable the ethernet switch forward flood GARP packet at this interface. |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.10 | ColumnzxAnIfLoadDefaultConfiguration | read-write | current | Use this parameter to load interface factory default settings. |
| 1.3.6.1.4.1.3902.1015.3.1.1.1.11 | ColumnzxAnIfLinkUpDownSeverity | read-write | current | Linkdown and linkup trap severity. notification be generated when the interface linkup or linkdown occurs. alarm should be generated when the interface linkdow… |
| 1.3.6.1.4.1.3902.1015.3.1.2 | TablezxAnEtherIfConfTable | not-accessible | current | This table includes the ethernet-like interface configuration. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1 | RowzxAnEtherIfConfEntry | not-accessible | current | An entry in zxAnEtherIfConfTable. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.1 | ColumnzxAnEtherIfConfDuplexSpeed | read-write | current | DURABLE: { auto_negotiate:all } The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(9… |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.2 | ColumnzxAnEtherIfActualDuplex | read-only | current | The actual duplex for this interface. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.3 | ColumnzxAnEtherIfActualSpeed | read-only | current | The actual speed for this interface. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.4 | ColumnzxAnEtherIfConf10GEPhyType | read-write | current | The physical tpye of this interface,it is used by 10GE interface only now. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.5 | ColumnzxAnEtherIfConfConnectorType | read-write | current | The connector tpye of this interface,such as fibre or copper or auto. if no connector should be regard,it is noUse. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.6 | ColumnzxAnEtherIfConf10GERefClk | read-write | current | The reference clock used by this interface.It is used by 10GE port. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.7 | ColumnzxAnEtherIfConfFlowCtrlEnable | read-write | current | Enable/disable the ehternet flow control. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.8 | ColumnzxAnEtherIfPortProtect | read-write | current | Enable/disable the ehternet Port Protect. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.9 | ColumnzxAnSecIfMacLearnedLimitEnable | read-write | current | Enable/disable MAC learning limit. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.10 | ColumnzxAnSecIfMaxLearnedMacs | read-write | current | Max MAC limit learnt.range is [0,32768] |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.11 | ColumnzxAnEtherIfMtu | read-write | current | Max Transmission Unit. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.12 | ColumnzxAnEtherIfMcastFloodingCtrl | read-write | current | Multicast flooding Control of this port. |
| 1.3.6.1.4.1.3902.1015.3.1.2.1.13 | ColumnzxAnEtherIfPortIsolateEnable | read-write | current | Enables and disables the port isolation function. enable(1): The port is added to the isolation group. All the ports in the isolation group are isolated from e… |
| 1.3.6.1.4.1.3902.1015.3.1.3 | TablezxAnEtherIfStatTable | not-accessible | current | This table includes the ethernet-like port performance statistics. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1 | RowzxAnEtherIfStatEntry | not-accessible | current | An entry in zxAnEtherIfStatTable. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.1 | ColumnzxAnEtherIfStatFCSErrors | read-only | current | The FCSErrors counter of ethernet-like interface. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.2 | ColumnzxAnEtherIfStat15minFCSErrors | read-only | current | The current 15 mininutes FCSErrors counter of ethernet-like interface. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.3 | ColumnzxAnEtherIf15minFcsErrsThresh | read-write | current | The threshold of zxAnEtherIfStat15minFCSErrors. When it exceeds this threshold, the zxAnEtherIf15minFcsErrsThreshAlm trap should be generated. If zxAnEtherIfSt… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.4 | ColumnzxAnEtherIfStat1dayFCSErrors | read-only | current | The 1 day FCSErrors counter of ethernet-like interface. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.5 | ColumnzxAnEtherIf1dayFcsErrsThresh | read-write | current | The threshold of zxAnEtherIfStat1dayFCSErrors. When it exceeds this threshold,the zxAnEtherIf1dayFcsErrsThreshAlm trap should be generated. If zxAnEtherIfStat1… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.6 | ColumnzxAnEtherIfOutOctetRate | read-only | current | An estimate of the interface's current transmitted bandwidth in bytes per second. For interfaces which do not vary in bandwidth or for those where no accurate … |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.7 | ColumnzxAnEtherIfOutPktRate | read-only | current | An estimate of the interface's current transmitted bandwidth in packets per second. For interfaces which do not vary in bandwidth or for those where no accurat… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.8 | ColumnzxAnEtherIfOutBandwidthUtil | read-only | current | An estimate of the interface's current transmitted bandwidth utilization. The value is between 0 to 100. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.9 | ColumnzxAnEtherIfOutDiscardPktRatio | read-only | current | An estimate of the interface's discarded packets ratio being transmitted. When bit 3 of zxAnInterfaceMgmtCapabilities is 0, the unit is 1%. When bit 3 of zxAnI… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.10 | ColumnzxAnEtherIfOutOctetPeakRate | read-only | current | The interface's peak transmitted bandwidth in bytes per second. If the bandwidth of the interface is greater than the maximum value reportable by this object t… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.11 | ColumnzxAnEtherIfInOctetRate | read-only | current | An estimate of the interface's current received bandwidth in bytes per second. For interfaces which do not vary in bandwidth or for those where no accurate est… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.12 | ColumnzxAnEtherIfInPktRate | read-only | current | An estimate of the interface's current received bandwidth in packets per second. For interfaces which do not vary in bandwidth or for those where no accurate e… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.13 | ColumnzxAnEtherIfInBandwidthUtil | read-only | current | An estimate of the interface's current received bandwidth utilization. The value is between 0 to 100. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.14 | ColumnzxAnEtherIfInDiscardPktRatio | read-only | current | An estimate of the interface's discarded packets ratio received. When bit 3 of zxAnInterfaceMgmtCapabilities is 0, the unit is 1%. When bit 3 of zxAnInterfaceM… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.15 | ColumnzxAnEtherIfInOctetPeakRate | read-only | current | The interface's peak received bandwidth in bytes per second. If the bandwidth of the interface is greater than the maximum value reportable by this object then… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.16 | ColumnzxAnEtherIfInErrPktRatio | read-only | current | An estimate of the interface's received error packets ratio. The value equals (recevied error packets / total received packets) * 100%. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.17 | ColumnzxAnEtherIfOutBwUtilThresh | read-write | current | The threshold of zxAnEtherIfOutBandwidthUtil. When it exceeds this threshold, the zxAnEtherIfOutBwUtilThreshAlarm trap should be generated. If zxAnEtherIfOutBa… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.18 | ColumnzxAnEtherIfInBandwidthUtilThresh | read-write | current | The threshold of zxAnEtherIfInBandwidthUtil. When it exceeds this threshold, the zxAnEtherIfInBwUtilThreshAlarm trap should be generated. If zxAnEtherIfInBandw… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.19 | ColumnzxAnEtherIfOutPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted. Discontinuities in the value of this counter can occur at re-initialization o… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.20 | ColumnzxAnEtherIfInOctetsCorrect | read-only | current | The total number of correct octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initia… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.21 | ColumnzxAnEtherIfOutOctetsCorrect | read-only | current | The total number of correct octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.22 | ColumnzxAnEtherIfInOctetsError | read-only | current | The total number of error octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initiali… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.23 | ColumnzxAnEtherIfOutOctetsError | read-only | current | The total number of error octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-i… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.24 | ColumnzxAnEthIfStat1SecFcsErrs | read-only | current | The current 1 second FCSErrors counter of ethernet-like interface. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.25 | ColumnzxAnEthIfStat1SecFcsErrsThresh | read-write | current | The threshold of zxAnEthIfStat1SecFcsErrs. When it exceeds this threshold, the zxAnEthIf1SecFcsErrsThreshAlm trap should be generated. If zxAnEthIfStat1SecFcsE… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.26 | ColumnzxAnEtherIfStatOutDiscardPkt | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.27 | ColumnzxAnEtherIfStatInDiscardPkt | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.28 | ColumnzxAnEtherIfInPkts | read-only | current | The total number of received packets. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.29 | ColumnzxAnEtherIfStatEs | read-only | current | Counter of errored seconds. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.30 | ColumnzxAnEtherIfStatSes | read-only | current | Counter of severely errored seconds. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.31 | ColumnzxAnEtherIfStatUas | read-only | current | Counter of unavailable seconds. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.32 | ColumnzxAnEtherIfStatLoss | read-only | current | Counter of loss of signal seconds. |
| 1.3.6.1.4.1.3902.1015.3.1.3.1.100 | ColumnzxAnEtherIfStatReset | read-write | current | Reset interface statistics counter manually when it is set to '1'. |
| 1.3.6.1.4.1.3902.1015.3.1.4 | TablezxAnEtherPortMirroringTable | not-accessible | current | This table includes the ethernet-like port mirroring. NOTES: 1. It must have only one MirroringPort in a device now. 2. Mirrored Ports can't be more than 8. |
| 1.3.6.1.4.1.3902.1015.3.1.4.1 | RowzxAnEtherPortMirroringEntry | not-accessible | current | An entry in zxAnEtherPortMirroringTable. |
| 1.3.6.1.4.1.3902.1015.3.1.4.1.1 | ColumnzxAnEtherIfMirrorSession | not-accessible | current | The session id of the port mirroring. |
| 1.3.6.1.4.1.3902.1015.3.1.4.1.2 | ColumnzxAnEtherIfMirrorIf | read-create | current | The ethernet-like mirroring port.It is the destination port. |
| 1.3.6.1.4.1.3902.1015.3.1.4.1.3 | ColumnzxAnEtherIfMirrorPortList | read-create | current | The ethernet-like mirrored port.It is a sequence of some source ports,such as 1346.1245.2681 . NOTES: Max count of ports is 8 now. |
| 1.3.6.1.4.1.3902.1015.3.1.4.1.4 | ColumnzxAnEtherIfMirrorDirectionList | read-create | current | The traffic direction list of the mirrored port list. Each value of the sequence represents a traffic direction. The value may be followings: both(1) egress(2)… |
| 1.3.6.1.4.1.3902.1015.3.1.4.1.5 | ColumnzxAnEtherIfMirrorRowStatus | read-create | current | Rowstatus of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.5 | ScalarzxAnIfSelfLoopDetect | read-write | current | Enable or disable the self-loop detection functionality. |
| 1.3.6.1.4.1.3902.1015.3.1.6 | ScalarzxAnIfAutoShutdownBySelfLoop | read-write | current | Enable or disable the auto-shutdown functionality. If zxAnIfAutoShutdownBySelfLoop is enabled, interface can be auto-shutdown when self-loop is detected. |
| 1.3.6.1.4.1.3902.1015.3.1.7 | TablezxAnIfLoopBackConfTable | not-accessible | current | This table is interface loop back configuration information table |
| 1.3.6.1.4.1.3902.1015.3.1.7.1 | RowzxAnIfLoopBackConfEntry | not-accessible | current | An entry containing interface loop back configuration information. |
| 1.3.6.1.4.1.3902.1015.3.1.7.1.1 | ColumnzxAnIfLoopBackConfDetection | read-write | current | Enable or disable the self-loop detection functionality for special interface. |
| 1.3.6.1.4.1.3902.1015.3.1.8 | TablezxAnIfLoopBackTable | not-accessible | current | This table is interface loop back information table |
| 1.3.6.1.4.1.3902.1015.3.1.8.1 | RowzxAnIfLoopBackEntry | not-accessible | current | An entry containing interface loop back information. |
| 1.3.6.1.4.1.3902.1015.3.1.8.1.1 | ColumnzxAnIfLoopBackStatus | read-only | current | The loop back status. The value selfLoop means interface self-loop is detected. selfLoopRecover means that interface is closed because of self-loop failure. se… |
| 1.3.6.1.4.1.3902.1015.3.1.8.1.2 | ColumnzxAnIfLoopBackClearAction | read-write | current | Clear Management object loop back status. this action means set zxAnIfLoopBackStatus value to normal. |
| 1.3.6.1.4.1.3902.1015.3.1.9 | NodezxAnEtherGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.9.1 | ScalarzxAnEtherBroadcastLimitEnable | read-write | current | Enable or disable the ethernet switch broadcast limit. |
| 1.3.6.1.4.1.3902.1015.3.1.9.2 | ScalarzxAnEtherFwdFloodBpduPktEnable | read-write | current | Enable or disable the ethernet switch forward flood BPDU packet. |
| 1.3.6.1.4.1.3902.1015.3.1.9.3 | ScalarzxAnEtherMulticastLimitEnable | read-write | current | Enable or disable the ethernet switch multicast limit. |
| 1.3.6.1.4.1.3902.1015.3.1.9.4 | ScalarzxAnEtherPacketFloodLimit | read-write | current | configuare the package flood limit. |
| 1.3.6.1.4.1.3902.1015.3.1.9.5 | ScalarzxAnEtherPortProtectEnable | read-write | current | Enable or disable the ethernet switch port protect. |
| 1.3.6.1.4.1.3902.1015.3.1.9.6 | ScalarzxAnEtherUnknowncastLimitEnable | read-write | current | Enable or disable the ethernet switch unknowncast limit. |
| 1.3.6.1.4.1.3902.1015.3.1.9.7 | TablezxAnEtherVdslPortProtectTable | not-accessible | current | This table includes the ethernet-switch port Protect,for all vdsl card. |
| 1.3.6.1.4.1.3902.1015.3.1.9.7.1 | RowzxAnEtherVdslPortProtectEntry | not-accessible | current | An entry in zxAnEtherVdslPortProtectTable. |
| 1.3.6.1.4.1.3902.1015.3.1.9.7.1.1 | ColumnzxAnEtherVdslPortProtectId | not-accessible | current | The Port Protect id. |
| 1.3.6.1.4.1.3902.1015.3.1.9.7.1.2 | ColumnzxAnEtherVdslPortProtectVlanId | read-create | current | The Vlan Id. |
| 1.3.6.1.4.1.3902.1015.3.1.9.7.1.3 | ColumnzxAnEtherVdslPortProtectEnable | read-create | current | Enable or disable the ethernet switch Port protect for Vdsl card. |
| 1.3.6.1.4.1.3902.1015.3.1.9.7.1.10 | ColumnzxAnEtherVdslPortProtRowStatus | read-create | current | Rowstatus of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.9.10 | ScalarzxAnEtherIfStatInterval | read-write | current | Ethernet interface statistic interval, The rate and ratio value is calculated in this interval. The value is between 30 to 600 seconds. |
| 1.3.6.1.4.1.3902.1015.3.1.9.11 | ScalarzxAnEtherMaxFrameSize | read-write | current | Global system maximum frame size, specifies the maximum frame size on all interfaces(PON ports and uplink interfaces). The invalid frame whose size is larger t… |
| 1.3.6.1.4.1.3902.1015.3.1.10 | NodezxAnMacDriftObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.10.1 | ScalarzxAnDriftMac | read-only | current | The MAC of packets,which drifted. |
| 1.3.6.1.4.1.3902.1015.3.1.10.2 | ScalarzxAnDriftVlan | read-only | current | The port VLAN, which MAC drifted.. |
| 1.3.6.1.4.1.3902.1015.3.1.10.3 | ScalarzxAnUplinkIfindex | read-only | current | The uplink Interface index. |
| 1.3.6.1.4.1.3902.1015.3.1.10.4 | ScalarzxAnDriftMacStatus | read-only | current | Mac drift status,success or failed |
| 1.3.6.1.4.1.3902.1015.3.1.11 | TablezxAnIfLoopBackTestTable | not-accessible | current | This table provides one row for each interface loopback test. |
| 1.3.6.1.4.1.3902.1015.3.1.11.1 | RowzxAnIfLoopBackTestEntry | not-accessible | current | DSL line loopback test information entry |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.1 | ColumnzxAnIfLoopBackTestRack | not-accessible | current | Rack number of the port. |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.2 | ColumnzxAnIfLoopBackTestShelf | not-accessible | current | Shelf number of the port. |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.3 | ColumnzxAnIfLoopBackTestSlot | not-accessible | current | Slot number of the port. |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.4 | ColumnzxAnIfLoopBackTestPort | not-accessible | current | The port number. |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.5 | ColumnzxAnIfLoopBackTestBridgePort | not-accessible | current | bridge port index. eg.It is PVC ID in ADSL port. If the test is only in the physical port,then this fileds will be 0 |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.6 | ColumnzxAnIfLoopBackTestType | read-create | current | This is loop test action expected. NOTES: |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.7 | ColumnzxAnIfLoopBackTestOperStatus | read-only | current | This is loop test operational status. Note: if zxAnIfLoopBackTestOperStatus equal to Excuting(1), ifOperStaus should be loopback test(3). |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.8 | ColumnzxAnIfLoopBackTestResult | read-only | current | This is loop test result and includes reasons for test failures. |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.9 | ColumnzxAnIfLoopBackTestConfSendCells | read-create | current | The count of cells will be sent in the loopback test. |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.10 | ColumnzxAnIfLoopBackTestRstRecvCells | read-only | current | The count of recived cells in the loopback test. |
| 1.3.6.1.4.1.3902.1015.3.1.11.1.15 | ColumnzxAnIfLoopBackTestRowStatus | read-create | current | Loop test table RowStatus . |
| 1.3.6.1.4.1.3902.1015.3.1.12 | TablezxAnEtherIfQueueStatTable | not-accessible | current | This table includes the queue performance Stat. |
| 1.3.6.1.4.1.3902.1015.3.1.12.1 | RowzxAnEtherIfQueueStatEntry | not-accessible | current | An entry in zxAnEtherIfQueueStatTable. |
| 1.3.6.1.4.1.3902.1015.3.1.12.1.1 | ColumnzxAnEtherIfQueueNo | not-accessible | current | The queeue number of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.12.1.2 | ColumnzxAnEtherIfQueueInOctets | read-only | current | The total number of octets received on the queue of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.12.1.3 | ColumnzxAnEtherIfQueueInPkts | read-only | current | The total number of packets received on the queue of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.12.1.4 | ColumnzxAnEtherIfQueueOutOctets | read-only | current | The total number of octets transmitted out of the queue of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.12.1.5 | ColumnzxAnEtherIfQueueOutPkts | read-only | current | The total number of packets transmitted out of the queue of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.12.1.6 | ColumnzxAnEtherIfQueueDropOctets | read-only | current | The total number of octets droped in the queue of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.12.1.7 | ColumnzxAnEtherIfQueueDropPkts | read-only | current | The total number of packets droped in the queue of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.13 | TablezxAnOpticalModuleMonTable | not-accessible | current | This table provides objects to monitor optical module in a network element. It also provides objects for setting high and low threshold levels. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1 | RowzxAnOpticalModuleMonEntry | not-accessible | current | An entry in zxAnOpticalModuleMonTable. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.1 | ColumnzxAnOpticalPowerRxCurrValue | read-only | current | The optical power monitored at the input. Value 0x7fffffff means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.2 | ColumnzxAnOpticalPowerRxLowerThresh | read-write | current | The lower limit threshold on input optical power. The alarm should be generated when zxAnOpticalPowerRxCurrValue is lower than this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.3 | ColumnzxAnOpticalPowerRxUpperThresh | read-write | current | The upper limit threshold on input optical power. The alarm should be generated when zxAnOpticalPowerRxCurrValue exceeds this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.4 | ColumnzxAnOpticalPowerTxCurrValue | read-only | current | The optical power monitored at the output. Value 0x7fffffff means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.5 | ColumnzxAnOpticalPowerTxLowerThresh | read-write | current | The lower limit threshold on output optical power. The alarm should be generated when zxAnOpticalPowerTxCurrValue is lower than this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.6 | ColumnzxAnOpticalPowerTxUpperThresh | read-write | current | The upper limit threshold on output optical power. The alarm should be generated when zxAnOpticalPowerTxCurrValue exceeds this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.7 | ColumnzxAnOpticalIfRxRate | read-only | current | The optical modules interface rate at the input. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.8 | ColumnzxAnOpticalIfTxRate | read-only | current | The optical modules interface rate at the output. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.9 | ColumnzxAnOpticalBiasCurrent | read-only | current | The optical modules bias current . Value 0x7fffffff means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.10 | ColumnzxAnOpticalSupplyVoltage | read-only | current | The optical modules supply voltage. Value 0x7fffffff means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.11 | ColumnzxAnOpticalWavelength | read-only | current | The optical modules wavelength. Value 0x7fffffff means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.12 | ColumnzxAnOpticalTemperature | read-only | current | The optical modules temperature . Value 0x7fffffff means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.13 | ColumnzxAnOpticalVenderPn | read-only | current | The optical modules vender P/N. Empty string means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.14 | ColumnzxAnOpticalVenderName | read-only | current | The optical modules vender name. Empty string means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.51 | ColumnzxAnOpticalBiasCurrLowerThresh | read-write | current | The lower limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.52 | ColumnzxAnOpticalBiasCurrUpperThresh | read-write | current | The upper limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.53 | ColumnzxAnOpticalVoltageLowerThresh | read-write | current | The lower limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.54 | ColumnzxAnOpticalVoltageUpperThresh | read-write | current | The upper limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.55 | ColumnzxAnOpticalTempLowerThresh | read-write | current | The lower limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature is lower than this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.56 | ColumnzxAnOpticalTempUpperThresh | read-write | current | The upper limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature exceeds this threshold. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.57 | ColumnzxAnOpticalIfRate | read-only | current | The optical module interface rate. Value 0x7fffffff means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.58 | ColumnzxAnOpticalFiberType | read-only | current | The optical module Fiber Type. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.59 | ColumnzxAnOpticalVersionLevel | read-only | current | The optical module vension Level. Empty string means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.60 | ColumnzxAnOpticalVendorSn | read-only | current | The optical module vender sn. Empty string means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.61 | ColumnzxAnOpticalProductionDate | read-only | current | The optical module production date. Empty string means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.62 | ColumnzxAnOpticalModuleType | read-only | current | The optical module type. Empty string means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.63 | ColumnzxAnOpticalFiberInterfaceType | read-only | current | The optical fiber interface. Empty string means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.64 | ColumnzxAnOpticalMaterialNumber | read-only | current | The material number of pin(A2). The string which is composed of 'f' means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.13.1.65 | ColumnzxAnOpticalRegisterData | read-only | current | The optical module data is from register. The string which is composed of 'f' means unsupported. |
| 1.3.6.1.4.1.3902.1015.3.1.14 | NodezxAnComMgmt | |||
| 1.3.6.1.4.1.3902.1015.3.1.14.1 | NodezxAnComGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.14.1.1 | ScalarzxAnVirtualComAdminMode | read-write | current | The mode of virtual COM port. discovered(1) - The COM port will be discovered with broadcast by the manager. report(2) - The COM port will report itself to the… |
| 1.3.6.1.4.1.3902.1015.3.1.14.1.2 | ScalarzxAnVirtualComDiscoveredPort | read-write | current | The listening port of virtual COM port in discovered mode. |
| 1.3.6.1.4.1.3902.1015.3.1.14.1.3 | ScalarzxAnVirtualComReportIp | read-write | current | The remote manager ip address of vitual COM port in report mode. |
| 1.3.6.1.4.1.3902.1015.3.1.14.1.4 | ScalarzxAnVirtualComReportPort | read-write | current | The remote manager TCP/IP port of vitual COM port in report mode. |
| 1.3.6.1.4.1.3902.1015.3.1.14.1.5 | ScalarzxAnVirtualComSignalPort | read-write | current | The listening port of virtual COM port for signaling transfer. |
| 1.3.6.1.4.1.3902.1015.3.1.14.1.6 | ScalarzxAnComVlanId | read-write | current | The VLAN ID is used to transfer com package. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2 | NodezxAnComPortObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1 | TablezxAnComPortTable | not-accessible | current | The COM port table. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1 | RowzxAnComPortEntry | not-accessible | current | An entry in the COM port table . |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.1 | ColumnzxAnComPortIfIndex | not-accessible | current | The index of the COM port. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.2 | ColumnzxAnComPortConfigType | read-write | current | The config type of the COM port. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.3 | ColumnzxAnComPortFlowControl | read-write | current | The flow control of the COM port. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.4 | ColumnzxAnComPortCommMode | read-write | current | The communication mode of the COM port. ipAndPort (1) - The COM port will send and receive message with the specified IP and port. virtualComPort (2) - The COM… |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.5 | ColumnzxAnComPortIpCommProtocol | read-write | current | The protocol of the COM port communication in ipAndPort mode. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.6 | ColumnzxAnComLocalTcpUdpPort | read-write | current | The local TCP/UDP port for the COM port communication. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.7 | ColumnzxAnComPortPeerIpAddress | read-write | current | The peer IP address for the COM port communication. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.8 | ColumnzxAnComPortPeerTcpUdpPort | read-write | current | The TCP/UDP port for the COM port communication. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.9 | ColumnzxAnComPortEncryptionMode | read-write | current | The encryption mode for the COM port communication. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.10 | ColumnzxAnComPortCacheDataEnable | read-write | current | The cache ability while reading data from the COM port. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.11 | ColumnzxAnComPacketTransmitSize | read-write | current | The packet size condition while transmitting packet. The packet will be transmitted once this size satisfied. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.12 | ColumnzxAnComPacketTransmitInterval | read-write | current | The interval condition while transmitting packet. The packet will be transmitted once the time satisfied. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.13 | ColumnzxAnComPortAdminMode | read-write | current | The mode of COM port. discovered(1) - The COM port will be discovered with broadcast by the manager. report(2) - The COM port will report itself to the manager. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.14 | ColumnzxAnComPortReportIpType | read-write | current | The remote manager ip address address type such as IPv4 or IPv6. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.15 | ColumnzxAnComPortReportIp | read-write | current | The remote manager ip address of COM port in report mode. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.16 | ColumnzxAnComPortReportPort | read-write | current | The remote manager TCP/IP port of COM port in report mode. |
| 1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.17 | ColumnzxAnComPortVlanId | read-write | current | The VLAN ID is used to transfer COM package. Value 0 means no VLAN ID is specified. |
| 1.3.6.1.4.1.3902.1015.3.1.15 | TablezxAnEthHisStatsTable | not-accessible | current | A list of Ethernet statistics entries. |
| 1.3.6.1.4.1.3902.1015.3.1.15.1 | RowzxAnEthHisStatsEntry | not-accessible | current | A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherHistStatsPkts object might be named etherHistStatsP… |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.1 | ColumnzxAnEthHisStatsIndex | not-accessible | current | The value of this object uniquely identifies this etherHistStats entry. |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.2 | ColumnzxAnEthHisDropEvents | read-only | current | The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets … |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.3 | ColumnzxAnEthHisInOctets | read-only | current | The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can … |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.4 | ColumnzxAnEthHisInPkts | read-only | current | The total number of packets (including bad packets, broadcast packets, and multicast packets) received. |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.5 | ColumnzxAnEthHisInBroadcastPkts | read-only | current | The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets. |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.6 | ColumnzxAnEthHisInMulticastPkts | read-only | current | The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast a… |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.7 | ColumnzxAnEthHisInCRCAlignErrors | read-only | current | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had eit… |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.8 | ColumnzxAnEthHisInUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.9 | ColumnzxAnEthHisInOversizePkts | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.10 | ColumnzxAnEthHisInFragments | read-only | current | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check… |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.11 | ColumnzxAnEthHisInJabbers | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq… |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.12 | ColumnzxAnEthHisCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment. |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.13 | ColumnzxAnEthHisInPkts64Octets | read-only | current | The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.14 | ColumnzxAnEthHisInPkts65to127Octets | read-only | current | The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS … |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.15 | ColumnzxAnEthHisInPkts128to255Octets | read-only | current | The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.16 | ColumnzxAnEthHisInPkts256to511Octets | read-only | current | The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.17 | ColumnzxAnEthHisInPkts512to1023Octets | read-only | current | The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FC… |
| 1.3.6.1.4.1.3902.1015.3.1.15.1.18 | ColumnzxAnEthHisInPkts1024to1518Octets | read-only | current | The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.3902.1015.3.1.16 | TablezxAnIfXHisTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table. |
| 1.3.6.1.4.1.3902.1015.3.1.16.1 | RowzxAnIfXHisEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.1 | ColumnzxAnIfXHisIndex | not-accessible | current | The value of this object uniquely identifies this etherHisStats entry. |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.2 | ColumnzxAnIfXHisInOctets | read-only | current | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value… |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.3 | ColumnzxAnIfXHisInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Thi… |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.4 | ColumnzxAnIfXHisInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.5 | ColumnzxAnIfXHisInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-… |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.6 | ColumnzxAnIfXHisOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in t… |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.7 | ColumnzxAnIfXHisOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.8 | ColumnzxAnIfXHisOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.3902.1015.3.1.16.1.9 | ColumnzxAnIfXHisOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.3902.1015.3.1.17 | TablezxAnIfHisTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.3902.1015.3.1.17.1 | RowzxAnIfHisEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.1 | ColumnzxAnIfHisIndex | not-accessible | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.2 | ColumnzxAnIfHisInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.3 | ColumnzxAnIfHisInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.4 | ColumnzxAnIfHisInNUcastPkts | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.5 | ColumnzxAnIfHisInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.6 | ColumnzxAnIfHisInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.7 | ColumnzxAnIfHisInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.8 | ColumnzxAnIfHisOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.10 | ColumnzxAnIfHisOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.11 | ColumnzxAnIfHisOutNUcastPkts | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.12 | ColumnzxAnIfHisOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.13 | ColumnzxAnIfHisOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.3902.1015.3.1.17.1.14 | ColumnzxAnIfHisOutQueueLength | read-only | deprecated | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.3902.1015.3.1.18 | TablezxAnIfVlanStatTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.3.1.18.1 | RowzxAnIfVlanStatEntry | not-accessible | current | a entry of this table. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.1 | ColumnzxAnIfVlanStatIfIndex | not-accessible | current | The index of this Ethernet vlan stat table |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.2 | ColumnzxAnIfVlanId | not-accessible | current | The vlan id |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.3 | ColumnzxAnIfVlanStatEnable | read-create | current | Enable/disable the ethernet vlan Statisic. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.4 | ColumnzxAnIfVlanInBroadcastPkts | read-only | current | Received Broadcast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.5 | ColumnzxAnIfVlanInUnicastPkts | read-only | current | Received Unicast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.6 | ColumnzxAnIfVlanInMulticastPkts | read-only | current | Received Multicast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.7 | ColumnzxAnIfVlanInDiscardBCastPkts | read-only | current | Received Broadcast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.8 | ColumnzxAnIfVlanInDiscardUCastPkts | read-only | current | Received Discarded Unicast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.9 | ColumnzxAnIfVlanInDiscardMCastPkts | read-only | current | Received Discarded Multicast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.10 | ColumnzxAnIfVlanOutBroadcastPkts | read-only | current | Transmitted Broadcast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.11 | ColumnzxAnIfVlanOutUnicastPkts | read-only | current | Transmitted Unicast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.12 | ColumnzxAnIfVlanOutMulticastPkts | read-only | current | Transmitted Multicast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.13 | ColumnzxAnIfVlanOutDiscardBCastPkts | read-only | current | Transmitted Discarded Broadcast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.14 | ColumnzxAnIfVlanOutDiscardUCastPkts | read-only | current | Transmitted Discarded Unicast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.15 | ColumnzxAnIfVlanOutDiscardMCastPkts | read-only | current | Transmitted Discarded Multicast Packets |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.16 | ColumnzxAnIfVlanOutPkts | read-only | current | The total number of packets transmitted out of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.17 | ColumnzxAnIfVlanInPkts | read-only | current | The total number of packets received on the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.18 | ColumnzxAnIfVlanOutOctets | read-only | current | The total number of octets transmitted out of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.19 | ColumnzxAnIfVlanInOctets | read-only | current | The total number of octets received on the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.20 | ColumnzxAnIfVlanDiscardPkts | read-only | current | The total number of discarded packets. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.21 | ColumnzxAnIfVlanOutBandwidthDisRatio | read-only | current | This object indicates the ratio of transmitted packets discarded by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the valu… |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.22 | ColumnzxAnIfVlanInBandwidthDisRatio | read-only | current | This object indicates the ratio of received packets discarded by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value o… |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.23 | ColumnzxAnIfVlanOutWredDisRatio | read-only | current | This object indicates the ratio of transmitted packets discarded by this traffic processor due to congestion in the queues. Discontinuities in the value of thi… |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.24 | ColumnzxAnIfVlanOutBandwidthDisPkts | read-only | current | This object indicates the number of transmitted packets discarded by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the val… |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.25 | ColumnzxAnIfVlanInBandwidthDisPkts | read-only | current | This object indicates the number of received packets discarded by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value … |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.26 | ColumnzxAnIfVlanOutWredDisPkts | read-only | current | This object indicates the number of transmitted packets discarded by this traffic processor due to congestion in the queues. Discontinuities in the value of th… |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.27 | ColumnzxAnIfVlanOutBitRate | read-only | current | The transmitted bit rate of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.28 | ColumnzxAnIfVlanInBitRate | read-only | current | The received bit rate of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.29 | ColumnzxAnIfVlanOutErroredOctets | read-only | current | The total number of errored octets transmitted out of the VLAN, including framing characters. Discontinuities in the value of this counter can occur at re-init… |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.30 | ColumnzxAnIfVlanInErroredOctets | read-only | current | The total number of errored octets received on the VLAN, including framing characters. Discontinuities in the value of this counter can occur at re-initializat… |
| 1.3.6.1.4.1.3902.1015.3.1.18.1.50 | ColumnzxAnIfVlanStatRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.19 | TablezxAnIfPktRateLimitTable | not-accessible | deprecated | Interface packet rate limit information table. |
| 1.3.6.1.4.1.3902.1015.3.1.19.1 | RowzxAnIfPktRateLimitEntry | not-accessible | deprecated | A entry of this table. |
| 1.3.6.1.4.1.3902.1015.3.1.19.1.1 | ColumnzxAnIfPktRateLimitIfIndex | not-accessible | deprecated | The index of this packet rate limit ifIndex. |
| 1.3.6.1.4.1.3902.1015.3.1.19.1.2 | ColumnzxAnIfBroadcastPktRateLimit | read-create | deprecated | Maximum broadcast packet rate. If it is 65535, then no limit. |
| 1.3.6.1.4.1.3902.1015.3.1.19.1.3 | ColumnzxAnIfFloodingPktRateLimit | read-create | deprecated | Maximum flooding packet rate. If it is 65535,then no limit. |
| 1.3.6.1.4.1.3902.1015.3.1.19.1.30 | ColumnzxAnIfPktRateLimitRowStatus | read-create | deprecated | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.20 | TablezxAnIfVlanRateLimitTable | not-accessible | current | Interface VLAN rate limit information table. |
| 1.3.6.1.4.1.3902.1015.3.1.20.1 | RowzxAnIfVlanRateLimitEntry | not-accessible | current | A entry of this table. |
| 1.3.6.1.4.1.3902.1015.3.1.20.1.1 | ColumnzxAnIfVlanRateLimitIfIndex | not-accessible | current | The index of this interface VLAN rate limit table. |
| 1.3.6.1.4.1.3902.1015.3.1.20.1.2 | ColumnzxAnIfVlanRateLimitVlanId | not-accessible | current | The VLAN ID. |
| 1.3.6.1.4.1.3902.1015.3.1.20.1.3 | ColumnzxAnIfVlanRateLimitDirection | not-accessible | current | The VLAN rate limit direction. |
| 1.3.6.1.4.1.3902.1015.3.1.20.1.4 | ColumnzxAnIfVlanRateLimitCir | read-create | current | The committed information rate. |
| 1.3.6.1.4.1.3902.1015.3.1.20.1.5 | ColumnzxAnIfVlanRateLimitPir | read-create | current | The peak information rate. |
| 1.3.6.1.4.1.3902.1015.3.1.20.1.30 | ColumnzxAnIfVlanRateLimitRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21 | NodezxAnProtocolRateLimitMgmt | |||
| 1.3.6.1.4.1.3902.1015.3.1.21.1 | TablezxAnProtoRateLimitGlobalTable | not-accessible | current | The global protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each p… |
| 1.3.6.1.4.1.3902.1015.3.1.21.1.1 | RowzxAnProtoRateLimitGlobalEntry | not-accessible | current | The protocol rate limiting entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21.1.1.1 | ColumnzxAnProtoRateLimitGlbIfType | not-accessible | current | Supported interface type. |
| 1.3.6.1.4.1.3902.1015.3.1.21.1.1.2 | ColumnzxAnProtoRateLimitGlbProtoType | not-accessible | current | Supported protocol type. |
| 1.3.6.1.4.1.3902.1015.3.1.21.1.1.3 | ColumnzxAnProtoRateLimitGlbIngress | read-create | current | The packet rate limit egress value. 0xFFFF means unconfigured. |
| 1.3.6.1.4.1.3902.1015.3.1.21.1.1.4 | ColumnzxAnProtoRateLimitGlbEgress | read-create | current | The packet rate limit ingress value. 0xFFFF means unconfigured. |
| 1.3.6.1.4.1.3902.1015.3.1.21.2 | TablezxAnProtocolRateLimitVlanTable | not-accessible | current | The valn protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each pro… |
| 1.3.6.1.4.1.3902.1015.3.1.21.2.1 | RowzxAnProtocolRateLimitVlanEntry | not-accessible | current | The protocol rate limiting entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21.2.1.1 | ColumnzxAnProtoRateLmtVlanId | not-accessible | current | The VLAN ID. |
| 1.3.6.1.4.1.3902.1015.3.1.21.2.1.2 | ColumnzxAnProtoRateLmtVlanProtoType | not-accessible | current | Supported Protocol Type. |
| 1.3.6.1.4.1.3902.1015.3.1.21.2.1.3 | ColumnzxAnProtoRateLmtVlanIngress | read-create | current | The packet rate limit ingress value. 0xFFFF means unconfigured. |
| 1.3.6.1.4.1.3902.1015.3.1.21.2.1.4 | ColumnzxAnProtoRateLmtVlanEgress | read-create | current | The packet rate limit egress value. 0xFFFF means unconfigured. |
| 1.3.6.1.4.1.3902.1015.3.1.21.2.1.50 | ColumnzxAnProtoRateLmtVlanRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3 | TablezxAnProtocoRateLimitIfTable | not-accessible | current | The global protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each p… |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1 | RowzxAnProtocoRateLimitIfEntry | not-accessible | current | The vport protocol rate limiting entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.1 | ColumnzxAnProtoRateLimitIfRack | not-accessible | current | This object indicates the rack number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.2 | ColumnzxAnProtoRateLimitIfShelf | not-accessible | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.3 | ColumnzxAnProtoRateLimitIfSlot | not-accessible | current | This object indicates the slot number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.4 | ColumnzxAnProtoRateLimitIfPort | not-accessible | current | This object indicates the physical port number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.5 | ColumnzxAnProtoRateLimitIfOnu | not-accessible | current | This object indicates the ONU number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.6 | ColumnzxAnProtoRateLimitIfLogicId | not-accessible | current | This Logical id of means vport |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.7 | ColumnzxAnProtoRateLimitIfProtoType | not-accessible | current | Supported Protocol Type. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.8 | ColumnzxAnProtoRateLimitIfIngress | read-create | current | The packet rate limit ingress value. 0xFFFF means unconfigured. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.9 | ColumnzxAnProtoRateLimitIfEgress | read-create | current | The packet rate egress value. 0xFFFF means unconfigured. |
| 1.3.6.1.4.1.3902.1015.3.1.21.3.1.50 | ColumnzxAnProtoRateLimitIfRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4 | TablezxAnProtocoRateLmtIfVlanTable | not-accessible | current | The global protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each p… |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1 | RowzxAnProtocoRateLmtIfVlanEntry | not-accessible | current | The vport protocol rate limiting entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.1 | ColumnzxAnProtoRateLmtIfVlanRack | not-accessible | current | This object indicates the rack number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.2 | ColumnzxAnProtoRateLmtIfVlanShelf | not-accessible | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.3 | ColumnzxAnProtoRateLmtIfVlanSlot | not-accessible | current | This object indicates the slot number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.4 | ColumnzxAnProtoRateLmtIfVlanPort | not-accessible | current | This object indicates the physical port number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.5 | ColumnzxAnProtoRateLmtIfVlanOnu | not-accessible | current | This object indicates the ONU number. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.6 | ColumnzxAnProtoRateLmtIfVlanLogicId | not-accessible | current | This Logical id of means vport |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.7 | ColumnzxAnProtoRateLmtIfVlanVlanId | not-accessible | current | The VLAN ID. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.8 | ColumnzxAnProtoRateLmtIfVlanProtoType | not-accessible | current | Supported Protocol Type. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.9 | ColumnzxAnProtoRateLmtIfVlanIngress | read-create | current | The packet rate limit ingress value. 0xFFFF means unconfigured. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.10 | ColumnzxAnProtoRateLmtIfVlanEgress | read-create | current | The packet rate limit egress value. 0xFFFF means unconfigured. |
| 1.3.6.1.4.1.3902.1015.3.1.21.4.1.50 | ColumnzxAnProtoRateLmtIfVlanRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21.50 | TablezxAnSupportedRateLimitTable | not-accessible | current | The supported protocol rate limiting table. This table specifies which kinds of information on protocol type, rate limiting scale and unit are supported for cu… |
| 1.3.6.1.4.1.3902.1015.3.1.21.50.1 | RowzxAnSupportedRateLimitEntry | not-accessible | current | The supported protocol rate limiting entry. |
| 1.3.6.1.4.1.3902.1015.3.1.21.50.1.1 | ColumnzxAnSupportedRateLimitScale | not-accessible | current | Supported Protocol Rate Limiting Scale. |
| 1.3.6.1.4.1.3902.1015.3.1.21.50.1.2 | ColumnzxAnSupportedProtocolType | not-accessible | current | Supported Protocol Type. |
| 1.3.6.1.4.1.3902.1015.3.1.21.50.1.3 | ColumnzxAnSupportedRateLimitDirection | not-accessible | current | The VLAN rate limit direction. |
| 1.3.6.1.4.1.3902.1015.3.1.21.50.1.4 | ColumnzxAnSupportedRateLimitUnits | read-only | current | Supported unit type of rate for a specific protocol. |
| 1.3.6.1.4.1.3902.1015.3.1.22 | NodezxAnIfProtocolTransObject | |||
| 1.3.6.1.4.1.3902.1015.3.1.22.1 | TablezxAnIfProtocolTransTable | not-accessible | current | The interface protocol transparent table. This table specifies that interface transparent transmits protocol. This table supports get-next from 'zxAnIfProtocol… |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1 | RowzxAnIfProtocolTransEntry | not-accessible | current | The interface protocol transparent entry. |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.1 | ColumnzxAnIfProtocolTransRack | not-accessible | current | Rack No. of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.2 | ColumnzxAnIfProtocolTransShelf | not-accessible | current | Shelf No. of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.3 | ColumnzxAnIfProtocolTransSlot | not-accessible | current | Slot No. of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.4 | ColumnzxAnIfProtocolTransPort | not-accessible | current | Physical port No. of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.5 | ColumnzxAnIfProtocolTransOnu | not-accessible | current | The ONU number. It is 0 in DSL port. |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.6 | ColumnzxAnIfProtocolTransIfType | not-accessible | current | Type of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.7 | ColumnzxAnIfProtocolTransLogicalId | not-accessible | current | Logic index of the interface. If zxAnIfTransProtocolIfType is 'physicalPort', its value is 0. If zxAnIfTransProtocolIfType is 'bridgePort', this object indicat… |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.8 | ColumnzxAnIfProtocolTransType | not-accessible | current | The transparent protocol type. |
| 1.3.6.1.4.1.3902.1015.3.1.22.1.1.20 | ColumnzxAnIfProtocolTransRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.3.1.23 | NodezxAnOpticalModuleGroup | |||
| 1.3.6.1.4.1.3902.1015.3.1.23.2 | TablezxAnOpticalModuleAlmPrfTable | not-accessible | current | This table includes the optical module threshold profile. It can be configured up to 32,which one is the default profile. |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1 | RowzxAnOpticalModuleAlmPrfEntry | not-accessible | current | An entry in zxAnOpticalModuleAlmPrfTable. |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.1 | ColumnzxAnOptPrfModuleAlmPrfName | not-accessible | current | A textual string containing information about the optical module alarm threshold profile name. It can be configured up to 32 profiles,which one is the default … |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.2 | ColumnzxAnOptPrfRxPwrLowerThresh | read-create | current | The lower limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue is lower than this threshold. The default valu… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.3 | ColumnzxAnOptPrfRxPwrUpperThresh | read-create | current | The upper limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue exceeds this threshold.The default value is 30. |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.4 | ColumnzxAnOptPrfTxPwrLowerThresh | read-create | current | The lower limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue is lower than this threshold. The default val… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.5 | ColumnzxAnOptPrfTxPwrUpperThresh | read-create | current | The upper limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue exceeds this threshold.The default value is 9… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.6 | ColumnzxAnOptPrfBiasCurrLowerThresh | read-create | current | The lower limit threshold on optical modules bias current.The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold. The default v… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.7 | ColumnzxAnOptPrfBiasCurrUpperThresh | read-create | current | The upper limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold.The default value i… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.8 | ColumnzxAnOptPrfVoltageLowerThresh | read-create | current | The lower limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold.The defau… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.9 | ColumnzxAnOptPrfVoltageUpperThresh | read-create | current | The upper limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold.The default val… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.10 | ColumnzxAnOptPrfTempLowerThresh | read-create | current | The lower limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature is lower than this threshold.The default va… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.11 | ColumnzxAnOptPrfTempUpperThresh | read-create | current | The upper limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature exceeds this threshold.The default value is… |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.12 | ColumnzxAnOptPrfOfflineTrapEnable | read-create | current | Indicates whether optical module is online/offline traps should be generated for this interface.The default value is enabled(1) |
| 1.3.6.1.4.1.3902.1015.3.1.23.2.1.50 | ColumnzxAnOptPrfModuleAlmPrfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1015.3.1.23.3 | TablezxAnOpticalAlmPrfIfConfTable | not-accessible | current | This table includes the optical module profile configuration. |
| 1.3.6.1.4.1.3902.1015.3.1.23.3.1 | RowzxAnOpticalAlmPrfIfConfEntry | not-accessible | current | An entry in zxAnOpticalAlmPrfIfConfTable. |
| 1.3.6.1.4.1.3902.1015.3.1.23.3.1.2 | ColumnzxAnOpticalIfAlmPrf | read-write | current | A textual string containing information about the optical module alarm threshold profile name . |
| 1.3.6.1.4.1.3902.1015.3.1.23.4 | TablezxAnOpticalAlsIfConfTable | not-accessible | current | This table includes the ALS configuration of the optical module. |
| 1.3.6.1.4.1.3902.1015.3.1.23.4.1 | RowzxAnOpticalAlsIfConfEntry | not-accessible | current | An entry in zxAnOpticalAlsIfConfTable. |
| 1.3.6.1.4.1.3902.1015.3.1.23.4.1.1 | ColumnzxAnOptAlsEnable | read-write | current | Enable or disable the ALS function. |
| 1.3.6.1.4.1.3902.1015.3.1.23.4.1.2 | ColumnzxAnOptAlsLaserLosDuration | read-write | current | This attribute specifies the value of the LOS duration. The laser will be shutdown when detected the LOS duration longer than zxAnOptAlsLaserLosDuration value.… |
| 1.3.6.1.4.1.3902.1015.3.1.23.4.1.3 | ColumnzxAnOptAlsLaserShutdownDuration | read-write | current | This attribute specifies the value of the laser shutdown duration. Setting this object will enable the ALS function. |
| 1.3.6.1.4.1.3902.1015.3.1.23.4.1.4 | ColumnzxAnOptAlsLaserStartUpDuration | read-write | current | This attribute specifies the value of the laser re-open duration. Setting this object will enable the ALS function. |
| 1.3.6.1.4.1.3902.1015.3.1.24 | NodezxAnIfStatsGroup | |||
| 1.3.6.1.4.1.3902.1015.3.1.24.2 | TablezxAnIfVlanCosStatsTable | not-accessible | current | Interface VLAN CoS performance statistics table. |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1 | RowzxAnIfVlanCosStatsEntry | not-accessible | current | An entry in zxAnIfVlanCosStatsTable. |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.1 | ColumnzxAnIfVlanCos | not-accessible | current | An integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values. |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.2 | ColumnzxAnIfVlanCosStatEnable | read-create | current | Enable/disable the interface VLAN CoS Statisic. |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.3 | ColumnzxAnIfVlanCosTxOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.4 | ColumnzxAnIfVlanCosRxOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.5 | ColumnzxAnIfVlanCosTxUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.6 | ColumnzxAnIfVlanCosRxUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.7 | ColumnzxAnIfVlanCosTxMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.8 | ColumnzxAnIfVlanCosRxMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.9 | ColumnzxAnIfVlanCosTxBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.10 | ColumnzxAnIfVlanCosRxBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in t… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.11 | ColumnzxAnIfVlanCosTxBWDisRatio | read-only | current | This object indicates the ratio of transmitted packets discarded by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the valu… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.12 | ColumnzxAnIfVlanCosRxBWDisRatio | read-only | current | This object indicates the ratio of received packets discarded by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value o… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.13 | ColumnzxAnIfVlanCosTxWredDisRatio | read-only | current | This object indicates the ratio of transmitted packets discarded by this traffic processor due to congestion in the queues. Discontinuities in the value of thi… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.14 | ColumnzxAnIfVlanCosTxBandwidthDisPkts | read-only | current | This object indicates the number of transmitted packets discarded by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the val… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.15 | ColumnzxAnIfVlanCosRxBandwidthDisPkts | read-only | current | This object indicates the number of received packets discarded by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value … |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.16 | ColumnzxAnIfVlanCosTxWredDisPkts | read-only | current | This object indicates the number of transmitted packets discarded by this traffic processor due to congestion in the queues. Discontinuities in the value of th… |
| 1.3.6.1.4.1.3902.1015.3.1.24.2.1.50 | ColumnzxAnIfVlanCosStatRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1015.3.1.25 | NodezxAnStormControlObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.25.2 | TablezxAnIfStormControlTable | not-accessible | current | Interface storm control table. |
| 1.3.6.1.4.1.3902.1015.3.1.25.2.1 | RowzxAnIfStormControlEntry | not-accessible | current | A entry of zxAnIfStormControlTable. |
| 1.3.6.1.4.1.3902.1015.3.1.25.2.1.1 | ColumnzxAnIfStormControlIfIndex | not-accessible | current | The index of this interface storm control table. |
| 1.3.6.1.4.1.3902.1015.3.1.25.2.1.2 | ColumnzxAnIfStormControlPktType | not-accessible | current | Storm control packet type. |
| 1.3.6.1.4.1.3902.1015.3.1.25.2.1.3 | ColumnzxAnIfStormCtrlRateLmtIngress | read-write | current | The packet rate limit ingress value. Value 0 means that the packet will be discarded. 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported. |
| 1.3.6.1.4.1.3902.1015.3.1.25.2.1.4 | ColumnzxAnIfStormCtrlRateLmtEgress | read-write | current | The packet rate limit egress value. Value 0 means that the packet will be discarded. 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported. |
| 1.3.6.1.4.1.3902.1015.3.1.25.2.1.5 | ColumnzxAnIfStormCtrlRateLmtUnit | read-only | current | The unit of packet rate limit. |
| 1.3.6.1.4.1.3902.1015.3.1.25.3 | TablezxAnIfVlanStormControlTable | not-accessible | current | Interface VLAN storm control table. |
| 1.3.6.1.4.1.3902.1015.3.1.25.3.1 | RowzxAnIfVlanStormControlEntry | not-accessible | current | A entry of zxAnIfVlanStormControlTable. |
| 1.3.6.1.4.1.3902.1015.3.1.25.3.1.1 | ColumnzxAnIfVlanStormControlIfIndex | not-accessible | current | The index of this interface VLAN storm control table. |
| 1.3.6.1.4.1.3902.1015.3.1.25.3.1.2 | ColumnzxAnIfVlanStormControlVlanId | not-accessible | current | The VLAN ID. |
| 1.3.6.1.4.1.3902.1015.3.1.25.3.1.3 | ColumnzxAnIfVlanStormControlPktType | not-accessible | current | Storm control packet type. |
| 1.3.6.1.4.1.3902.1015.3.1.25.3.1.4 | ColumnzxAnSecStormCtrlIfVlanRateLimit | read-create | current | Value 0 means that the packet will be discarded. Value 65535 means no limit. |
| 1.3.6.1.4.1.3902.1015.3.1.25.3.1.5 | ColumnzxAnSecStormCtrlIfVlanBurstSize | read-create | current | Burst size. |
| 1.3.6.1.4.1.3902.1015.3.1.25.3.1.50 | ColumnzxAnSecStormCtrlIfVlanRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1015.3.1.26 | NodezxAnProtoRateLimitObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.26.2 | TablezxAnProtoIfRateLimitTable | not-accessible | current | Interface protocol rate limit table. |
| 1.3.6.1.4.1.3902.1015.3.1.26.2.1 | RowzxAnProtoIfRateLimitEntry | not-accessible | current | A entry of zxAnProtoIfRateLimitTable. |
| 1.3.6.1.4.1.3902.1015.3.1.26.2.1.1 | ColumnzxAnProtoIfRateLimitIfIndex | not-accessible | current | The index of this interface ptrotocol packet limit table. |
| 1.3.6.1.4.1.3902.1015.3.1.26.2.1.2 | ColumnzxAnProtoIfRateLimitProtoType | not-accessible | current | The protocol packet type. |
| 1.3.6.1.4.1.3902.1015.3.1.26.2.1.3 | ColumnzxAnProtoIfRateLimitIngress | read-write | current | The packet rate limit ingress value. Value 0 means that the packet will be discarded, 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported. |
| 1.3.6.1.4.1.3902.1015.3.1.26.2.1.4 | ColumnzxAnProtoIfRateLimitEgress | read-write | current | The packet rate limit egress value. Value 0 means that the packet will be discarded, 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported. |
| 1.3.6.1.4.1.3902.1015.3.1.27 | NodezxAnIfVlanConfObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.27.2 | TablezxAnIfVlanMacLearnedLimitTable | not-accessible | current | Interface VLAN MAC address learned limit table. |
| 1.3.6.1.4.1.3902.1015.3.1.27.2.1 | RowzxAnIfVlanMacLearnedLimitEntry | not-accessible | current | Interface VLAN MAC address learned limit entry. |
| 1.3.6.1.4.1.3902.1015.3.1.27.2.1.1 | ColumnzxAnIfVlanMacLearnedLmtIfIndex | not-accessible | current | Interface index. |
| 1.3.6.1.4.1.3902.1015.3.1.27.2.1.2 | ColumnzxAnSecIfVlanMacLearnedVid | not-accessible | current | VLAN ID. |
| 1.3.6.1.4.1.3902.1015.3.1.27.2.1.3 | ColumnzxAnSecIfVlanMacLearnedMaxMacs | read-create | current | Maximum Learned MAC Addresses. Value 0 mean to disable MAC address learning. |
| 1.3.6.1.4.1.3902.1015.3.1.27.2.1.50 | ColumnzxAnSecIfVlanMacLearnedRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1015.3.1.50 | NodezxAnIfTest | |||
| 1.3.6.1.4.1.3902.1015.3.1.50.1 | NodezxAnIfPppoeTest | |||
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1 | TablezxAnIfPppoeTestTable | not-accessible | current | The table listing PPPoE test entries. An entry indicates a test. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1 | RowzxAnIfPppoeTestEntry | not-accessible | current | An entry in the zxAnIfPppoeTestTable. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.1 | ColumnzxAnIfPppoeTestRack | not-accessible | current | This object indicates the rack number. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.2 | ColumnzxAnIfPppoeTestShelf | not-accessible | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.3 | ColumnzxAnIfPppoeTestSlot | not-accessible | current | This object indicates the slot number. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.4 | ColumnzxAnIfPppoeTestPort | not-accessible | current | This object indicates the physical port number. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.5 | ColumnzxAnIfPppoeTestOnu | not-accessible | current | When zxAnIfPppoeTestCircuitType are 'onu' or 'gemportOrLlid' or 'servicePort', this object indicates 'onu ID'. When zxAnIfPppoeTestCircuitType are 'physicalPor… |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.6 | ColumnzxAnIfPppoeTestCircuitType | not-accessible | current | This object indicates the type of port. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.7 | ColumnzxAnIfPppoeTestLogicalId | not-accessible | current | This value is an oid which indicats the logical index. When zxAnIfPppoeTestCircuitType is 'physicalPort', its value is '0'. When zxAnIfPppoeTestCircuitType is … |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.8 | ColumnzxAnIfPppoeTestVlanId | read-create | current | The VLAN of interface which will be used in testing datagram. 0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN l… |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.9 | ColumnzxAnIfPppoeTestStatus | read-only | current | The status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - test is not started in… |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.10 | ColumnzxAnIfPppoeTestFailReason | read-only | current | The failed reason of test. none(1) - no error unknownError(2) - unknown error hardwareNotSupport(3) - Hardware does not support the test. notFindVlan(4) - Spec… |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.11 | ColumnzxAnIfPppoeTestUserName | read-create | current | The user name. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.12 | ColumnzxAnIfPppoeTestPassword | read-create | current | The password. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.13 | ColumnzxAnIfPppoeTestAuthMode | read-create | current | The protocol that is used to anthenticate user. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.14 | ColumnzxAnIfPppoeTestAction | read-create | current | The object is used to start or stop test. The object could be specified when creating an entry, also could be specified alone in a SET operation. start(1) - St… |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.15 | ColumnzxAnIfPppoeTestClientIpType | read-only | current | Client IP address type. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.16 | ColumnzxAnIfPppoeTestClientIpAddr | read-only | current | The IP address that is distributed by BAS when PPPoE test is completed successfully. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.17 | ColumnzxAnIfPppoeTestBasIpType | read-only | current | The BAS IP address type. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.18 | ColumnzxAnIfPppoeTestBasIpAddr | read-only | current | The BAS IP address. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.19 | ColumnzxAnIfPppoeTestBasMac | read-only | current | The BAS MAC address. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.20 | ColumnzxAnIfPppoeTestBasDelay | read-only | current | The BAS delay. Value 0 means that the device disconnects to BAS. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.21 | ColumnzxAnIfPppoeTestTimeout | read-create | current | The PPPoE test timed out. Value 0 means no timeout. |
| 1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.50 | ColumnzxAnIfPppoeTestRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. Only 'createAndGo' and 'destroy' need to be supported. If test is in progress,… |
| 1.3.6.1.4.1.3902.1015.3.1.50.2 | NodezxAnIfDhcpTest | |||
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2 | TablezxAnIfDhcpTestTable | not-accessible | current | The table listing DHCP test entries. An entry indicates a test. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1 | RowzxAnIfDhcpTestEntry | not-accessible | current | An entry in the zxAnIfDhcpTestTable. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.1 | ColumnzxAnIfDhcpTestRack | not-accessible | current | Rack No. of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.2 | ColumnzxAnIfDhcpTestShelf | not-accessible | current | Shelf No. of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.3 | ColumnzxAnIfDhcpTestSlot | not-accessible | current | Slot No. of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.4 | ColumnzxAnIfDhcpTestPort | not-accessible | current | Physical port No. of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.5 | ColumnzxAnIfDhcpTestOnu | not-accessible | current | ONU No. of the interface. It is valid only if zxAnIfDhcpTestIfType is 'ponOnu' or 'portVPort' or 'onuUni' or 'servicePort', otherwise, its value is 0. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.6 | ColumnzxAnIfDhcpTestIfType | not-accessible | current | Type of the interface. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.7 | ColumnzxAnIfDhcpTestLogicalId | not-accessible | current | Logic index of the interface. If zxAnIfDhcpTestIfType is 'physicalPort', its value is 0. If zxAnIfDhcpTestIfType is 'bridgePort', this object indicates 'pvc', … |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.8 | ColumnzxAnIfDhcpTestVlanId | read-create | current | The VLAN of interface which will be used in testing datagram. 0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN l… |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.9 | ColumnzxAnIfDhcpTestStatus | read-only | current | The status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - test is not started in… |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.10 | ColumnzxAnIfDhcpTestFailReason | read-only | current | The failed reason of test. none(1) - no error unknownError(2) - unknown error hardwareNotSupport(3) - Hardware does not support the test. notFindVlan(4) - Spec… |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.11 | ColumnzxAnIfDhcpTestAction | read-create | current | The object is used to start or stop test. The object could be specified when creating an entry, also could be specified alone in a SET operation. start(1) - St… |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.12 | ColumnzxAnIfDhcpTestClientIpType | read-only | current | Client IP address type. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.13 | ColumnzxAnIfDhcpTestClientIpAddr | read-only | current | The IP address that is distributed by BAS when Dhcp test is completed successfully. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.14 | ColumnzxAnIfDhcpTestBasIpType | read-only | current | The BAS IP address type. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.15 | ColumnzxAnIfDhcpTestBasIpAddr | read-only | current | The BAS IP address. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.16 | ColumnzxAnIfDhcpTestBasMac | read-only | current | The BAS MAC address. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.17 | ColumnzxAnIfDhcpTestBasDelay | read-only | current | The BAS delay. Value 0 means that the device disconnects to BAS. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.18 | ColumnzxAnIfDhcpTestTimeout | read-create | current | The DHCP test timed out. Value 0 means no timeout. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.19 | ColumnzxAnIfDhcpTestClientMac | read-create | current | The DHCP test client MAC address. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.20 | ColumnzxAnIfDhcpTestAuthMode | read-create | current | DHCP test authentication mode. noAuth(1) - DHCP test without authentication. option60String(2) - authenticate with zxAnIfDhcpTestOption60String. usernameAndPas… |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.21 | ColumnzxAnIfDhcpTestOption60String | read-create | current | The option60 for DHCP test. This object is valid when zxAnIfDhcpTestAuthMode is option60String(1). |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.22 | ColumnzxAnIfDhcpTestUserName | read-create | current | The user name. This object is valid when zxAnIfDhcpTestAuthMode is usernameAndPassword(2). |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.23 | ColumnzxAnIfDhcpTestPassword | read-create | current | The password. This object is valid when zxAnIfDhcpTestAuthMode is usernameAndPassword(2). |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.24 | ColumnzxAnIfDhcpTestGatewayIpType | read-only | current | The gateway IP address type. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.25 | ColumnzxAnIfDhcpTestGatewayIpAddr | read-only | current | The gateway IP address. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.26 | ColumnzxAnIfDhcpTestPingMaxDelay | read-only | current | The maximum delay for DHCP test ping gateway. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.27 | ColumnzxAnIfDhcpTestPingMinDelay | read-only | current | The minimum delay for DHCP test ping gateway. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.28 | ColumnzxAnIfDhcpTestPingAverageDelay | read-only | current | The average delay for DHCP test ping gateway . |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.29 | ColumnzxAnIfDhcpTestPingSuccessTimes | read-only | current | The successful times for DHCP test ping gateway. |
| 1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.50 | ColumnzxAnIfDhcpTestRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1015.3.1.100 | NodezxAnPortNumberStatsObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.100.1 | NodezxAnTotalPortNumberStatsObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.100.1.1 | ScalarzxAnTotalAdslPorts | read-only | current | The number of total ADSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.1.2 | ScalarzxAnTotalVdslPorts | read-only | current | The number of total VDSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.1.3 | ScalarzxAnTotalShdslPorts | read-only | current | The number of total SHDSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.1.4 | ScalarzxAnTotalEthernetUserPorts | read-only | current | The number of total ethernet user ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.1.5 | ScalarzxAnTotalIgmpPorts | read-only | current | The number of total IGMP ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.1.6 | ScalarzxAnTotalPwe3Ports | read-only | current | The number of total PWE3 E1 ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.2 | NodezxAnOnlinePortNumberStatsObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.100.2.1 | ScalarzxAnOnlineAdslPorts | read-only | current | The number of online ADSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.2.2 | ScalarzxAnOnlineVdslPorts | read-only | current | The number of online VDSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.2.3 | ScalarzxAnOnlineShdslPorts | read-only | current | The number of online SHDSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.2.4 | ScalarzxAnOnlineEthernetUserPorts | read-only | current | The number of online ethernet user ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.2.5 | ScalarzxAnOnlineIgmpPorts | read-only | current | The number of online IGMP ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.2.6 | ScalarzxAnOnlinePwe3Ports | read-only | current | The number of online PWE3 E1 ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.3 | NodezxAnActivePortNumberStatsObjects | |||
| 1.3.6.1.4.1.3902.1015.3.1.100.3.1 | ScalarzxAnActiveAdslPorts | read-only | current | The number of active ADSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.3.2 | ScalarzxAnActiveVdslPorts | read-only | current | The number of active VDSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.3.3 | ScalarzxAnActiveShdslPorts | read-only | current | The number of active SHDSL ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.3.4 | ScalarzxAnActiveEthernetUserPorts | read-only | current | The number of active ethernet user ports. |
| 1.3.6.1.4.1.3902.1015.3.1.100.3.5 | ScalarzxAnActivePwe3Ports | read-only | current | The number of active PWE3 E1 ports. |
| 1.3.6.1.4.1.3902.1015.3.1.200 | ScalarzxAnInterfaceMgmtCapabilities | read-only | current | The management capabilities of this interface. The bit value 1 means the function represented by this bit is supported by this interface. bit 0: value 1 means … |
| 1.3.6.1.4.1.3902.1015.3.2 | NodezxAnInterfaceTrapObjects | |||
| 1.3.6.1.4.1.3902.1015.3.2.1 | NotificationzxAnIfUplinkUp | current | The operational status of uplink interface changes to up. | |
| 1.3.6.1.4.1.3902.1015.3.2.2 | NotificationzxAnIfUplinkDown | current | The operational status of uplink interface changes to down. | |
| 1.3.6.1.4.1.3902.1015.3.2.3 | NotificationzxAnIfAccesslinkUp | current | The operational status of access link interface changes to up. | |
| 1.3.6.1.4.1.3902.1015.3.2.4 | NotificationzxAnIfAccesslinkDown | current | The operational status of access link interface changes to down. | |
| 1.3.6.1.4.1.3902.1015.3.2.6 | NotificationzxAnEquipIfFiberLosTrap | current | The optical fiber module has checked loss of signal event. | |
| 1.3.6.1.4.1.3902.1015.3.2.7 | NotificationzxAnEquipIfFiberLosCleardTrap | current | The optical fiber module has checked that the loss of signal event has been cleared. | |
| 1.3.6.1.4.1.3902.1015.3.2.8 | NotificationzxAnIfAccessSelfLoopTrap | current | SelfLoop failure of access link interface has been found. Varible ifIndex indicates which access link interface has SelfLoop failure. | |
| 1.3.6.1.4.1.3902.1015.3.2.9 | NotificationzxAnIfAccessSelfLoopCleardTrap | current | SelfLoop failure has been cleared. | |
| 1.3.6.1.4.1.3902.1015.3.2.10 | NotificationzxAnIfMacDriftTrap | current | Mac draft of access link interface has been found. Varible ifIndex indicates which access link interface has MAC draft. | |
| 1.3.6.1.4.1.3902.1015.3.2.11 | NotificationzxAnIfMacDriftCleardTrap | current | MAC drift has been cleared. | |
| 1.3.6.1.4.1.3902.1015.3.2.12 | NotificationzxAnIfSignalDegrade | current | The interface signal degrade. | |
| 1.3.6.1.4.1.3902.1015.3.2.13 | NotificationzxAnIfSignalDegradeCleard | current | The interface signal degrade cleared. | |
| 1.3.6.1.4.1.3902.1015.3.2.20 | NotificationzxAnEtherIf15minFcsErrsThreshAlm | current | It indicates that ZxAnEtherIfStat15minFCSErrors exceeds the threshold zxAnEtherIf15minFcsErrsThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.21 | NotificationzxAnEtherIf15minFcsErrsThAlmClr | current | It indicates that ZxAnEtherIfStat15minFCSErrors is below the threshold zxAnEtherIf15minFcsErrsThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.22 | NotificationzxAnEtherIf1dayFcsErrsThreshAlm | current | It indicates that ZxAnEtherIfStat1dayFCSErrors exceeds the threshold zxAnEtherIf1dayFcsErrsThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.23 | NotificationzxAnEtherIf1dayFcsErrsThAlmClr | current | It indicates that ZxAnEtherIfStat1dayFCSErrors is below the threshold zxAnEtherIf1dayFcsErrsThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.24 | NotificationzxAnEtherIfOutBwUtilThreshAlarm | current | It indicates that zxAnEtherIfOutBandwidthUtil exceeds the threshold zxAnEtherIfOutBwUtilThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.25 | NotificationzxAnEtherIfOutBwUtilThrAlmClr | current | It indicates that zxAnEtherIfOutBandwidthUtil is below the threshold zxAnEtherIfOutBwUtilThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.26 | NotificationzxAnEtherIfInBwUtilThreshAlarm | current | It indicates that zxAnEtherIfInBandwidthUtil exceeds the threshold zxAnEtherIfInBandwidthUtilThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.27 | NotificationzxAnEtherIfInBwUtilThrAlmClr | current | It indicates that zxAnEtherIfInBandwidthUtil is below the threshold zxAnEtherIfInBandwidthUtilThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.70 | NotificationzxAnOptPwrRxUnderThreshAlarm | current | It indicates that zxAnOpticalPowerRxCurrValue is below the zxAnOpticalPowerRxLowerThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.71 | NotificationzxAnOptPwrRxUnderThreshAlmClr | current | zxAnOptPwrRxUnderThreshAlarm clear | |
| 1.3.6.1.4.1.3902.1015.3.2.72 | NotificationzxAnOptPwrRxOverThreshAlarm | current | It indicates that zxAnOpticalPowerRxCurrValue is exceeds the zxAnOpticalPowerRxUpperThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.73 | NotificationzxAnOptPwrRxOverThreshAlmClr | current | zxAnOptPwrRxOverThreshAlarm clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.74 | NotificationzxAnOptPwrTxUnderThreshAlarm | current | It indicates that zxAnOpticalPowerTxCurrValue is below the zxAnOpticalPowerTxLowerThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.75 | NotificationzxAnOptPwrTxUnderThrAlmClr | current | zxAnOptPwrTxUnderThreshAlarm clear | |
| 1.3.6.1.4.1.3902.1015.3.2.76 | NotificationzxAnOptPwrTxOverThreshAlarm | current | It indicates that zxAnOpticalPowerTxCurrValue is exceeds the zxAnOpticalPowerTxUpperThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.77 | NotificationzxAnOptPwrTxOverThreshAlmClr | current | zxAnOptPwrTxOverThreshAlarm clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.78 | NotificationzxAnEthIf1SecFcsErrsThreshAlm | current | It indicates that zxAnEthIfStat1SecFcsErrs exceeds the threshold zxAnEthIfStat1SecFcsErrsThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.79 | NotificationzxAnEthIf1SecFcsErrsThrshAlmClrd | current | zxAnEthIf1SecFcsErrsThreshAlm clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.80 | NotificationzxAnOptUnderCurrent | current | It indicates that zxAnOpticalBiasCurrent is below the zxAnOpticalBiasCurrLowerThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.81 | NotificationzxAnOptUnderCurrentClr | current | zxAnOptBiasCurrUnderThreshAlm clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.82 | NotificationzxAnOptOverCurrent | current | It indicates that zxAnOpticalBiasCurrent is over the zxAnOpticalBiasCurrUpperThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.83 | NotificationzxAnOptOverCurrentClr | current | zxAnOptOverCurrent clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.84 | NotificationzxAnOptUnderVoltage | current | It indicates that zxAnOpticalSupplyVoltage is below the zxAnOpticalVoltageLowerThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.85 | NotificationzxAnOptUnderVoltageClr | current | zxAnOptUnderVoltage clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.86 | NotificationzxAnOptOverVoltage | current | It indicates that zxAnOpticalSupplyVoltage is over the zxAnOpticalVoltageUpperThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.87 | NotificationzxAnOptOverVoltageClr | current | zxAnOptOverVoltage clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.88 | NotificationzxAnOptLowTemperatureAlarm | current | It indicates that zxAnOpticalTemperature is below the zxAnOpticalTempLowerThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.89 | NotificationzxAnOptLowTemperatureAlarmClr | current | zxAnOptLowTemperatureAlarm clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.90 | NotificationzxAnOptHighTemperatureAlarm | current | It indicates that zxAnOpticalTemperature is over the zxAnOpticalTempUpperThresh. | |
| 1.3.6.1.4.1.3902.1015.3.2.91 | NotificationzxAnOptHighTemperatureAlarmClr | current | zxAnOptHighTemperatureAlarm clear. | |
| 1.3.6.1.4.1.3902.1015.3.2.92 | NotificationzxAnIfAccessLinkDownClr | current | The operational status of access link interface changes to up. | |
| 1.3.6.1.4.1.3902.1015.3.2.93 | NotificationzxAnIfAccessLinkDownAlm | current | The operational status of access link interface changes to down. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ProtoRateLimitType | INTEGER { arp(1), dhcpv4(2), dhcpv6(3), igmp(4), pppoe(5), cfm(6), nd(7), mld(8), broadcastAndFlood(9), icmp(10) } | current | Protocol Type. |
| RateLimitProtocolType | INTEGER { igmp(1), mld(2), linkLocalAddr(3), icmpv6(4), nd(5), dhcpv6(6) } | current | Protocol Type. |
| RateLimitScale | INTEGER { vportGlobal(1), vlan(2), vport(3), vportAndVlan(4) } | current | Protocol Rate Limiting Scale. |
| StormControlType | INTEGER { broadcast(1), unknownUnicast(2), multicast(3) } | current | Storm control type. |