ZTE-AN-MPLS-L2VPN-MIB
97 objects
This MIB contains managed object definitions for MPLS L2VPN operation.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter64 experimental Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| ZTE-AN-TC-MIB | zxAn ZxAnIfindex |
| ZX-PWE3-MIB | IANAPwPsnTypeTC IANAPwTypeTC |
| ZXPW-TC-STD-MIB | PwIndexType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.59 | IdentityzxAnMplsL2vpnMib | This MIB contains managed object definitions for MPLS L2VPN operation. | ||
| 1.3.6.1.4.1.3902.1015.59.1 | NodezxAnL2vpnGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.59.1.11 | TablezxAnMplsStaticPwTable | not-accessible | current | This table contains information about the MPLS L2VPN static pseudo wire(PW). |
| 1.3.6.1.4.1.3902.1015.59.1.11.1 | RowzxAnMplsStaticPwEntry | not-accessible | current | An entry for zxAnMplsStaticPwTable. |
| 1.3.6.1.4.1.3902.1015.59.1.11.1.2 | ColumnzxAnMplsStaticPwName | not-accessible | current | The pseudo wire profile name. |
| 1.3.6.1.4.1.3902.1015.59.1.11.1.3 | ColumnzxAnMplsOutgoingPwLabel | read-create | current | The pseudo wire label used in the outbound direction (i.e. toward the PSN). It may be set up manually if owner is 'manual' or automatically otherwise. Examples… |
| 1.3.6.1.4.1.3902.1015.59.1.11.1.4 | ColumnzxAnMplsIncomingPwLabel | read-create | current | The pseudo wire label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherw… |
| 1.3.6.1.4.1.3902.1015.59.1.11.1.31 | ColumnzxAnMplsStaticPwRowStatus | read-create | current | Row Status of the Table. |
| 1.3.6.1.4.1.3902.1015.59.2 | NodezxAnVpwsObjects | |||
| 1.3.6.1.4.1.3902.1015.59.2.11 | TablezxAnVpwsTable | not-accessible | current | This table contains information about the MPLS L2VPN VPWS.VPWS L2VPNs employ layer 2 services over MPLS to build a topology of point-to-point connections that … |
| 1.3.6.1.4.1.3902.1015.59.2.11.1 | RowzxAnVpwsEntry | not-accessible | current | An entry for zxAnVpwsTable. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.1 | ColumnzxAnVpwsL3IfIndex | not-accessible | current | A unique value for each interface. The field of interface type in ZxAnIfindex for L3 is 0xF(Layer 3 interface). |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.2 | ColumnzxAnVpwsPeerIpAddrType | read-create | current | Denotes the address type of the peer node. It should be set to 'unknown' if PE/pseudo wire(PW) maintenance protocol is not used and the address is unknown. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.3 | ColumnzxAnVpwsPeerIpAddr | read-create | current | This object contains the value of the peer node address of the pseudo pire(PW)/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes… |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.4 | ColumnzxAnVpwsVcId | read-create | current | Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or pseudo wire ID AVP for L2TP. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.5 | ColumnzxAnVpwsPwType | read-create | current | Indicates the pseudo wire type (i.e. the carried service). |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.6 | ColumnzxAnVpwsStaticPwName | read-create | current | VPWS pseudo wire profile. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.7 | ColumnzxAnVpwsStandbyPeerIpAddrType | read-create | current | The type of standby peer ip address. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.8 | ColumnzxAnVpwsStandbyPeerIpAddr | read-create | current | The standby peer IP address. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.9 | ColumnzxAnVpwsStandbyVcId | read-create | current | The standby VC ID. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.10 | ColumnzxAnVpwsPwe3CWPreferred | read-create | current | It indicates LDP entity prefers to use control word or not in PW. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.11 | ColumnzxAnVpwsVccvEnable | read-create | current | VCCV(Virtual Circuit Connectivity Verification) enable switch. VCCV provides a control channel that is associated with a pseudowire (PW), as well as the corres… |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.12 | ColumnzxAnVpwsCcTypeCapability | read-only | current | Control Channel(CC) types Capability, it indicates which CC types are supported. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.13 | ColumnzxAnVpwsCvTypeCapability | read-only | current | Connectivity Verification (CV) Types Capability, it indicates which CV types are supported. |
| 1.3.6.1.4.1.3902.1015.59.2.11.1.31 | ColumnzxAnVpwsRowStatus | read-create | current | Row Status of the Table. |
| 1.3.6.1.4.1.3902.1015.59.3 | NodezxAnVplsObjects | |||
| 1.3.6.1.4.1.3902.1015.59.3.11 | TablezxAnVplsVfiConfigTable | not-accessible | current | VPLS config table. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1 | RowzxAnVplsVfiConfigEntry | not-accessible | current | VPLS config Entry.Virtual Forwarding Instance (VFI)is a virtual Layer 2 forwarding entity that defines the VPLS domain membership and resembles virtual switche… |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.1 | ColumnzxAnVplsVfiName | not-accessible | current | Virtual Forwarding Instance (VFI)is a virtual Layer 2 forwarding entity that defines the VPLS domain membership and resembles virtual switches on PE routers. E… |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.2 | ColumnzxAnVplsVfiVcid | read-create | current | This configures Virtual Circuit id. When VPLS instances of two PE routers belong to same VPLS region, it is required to establish pseudo wire to continue the c… |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.3 | ColumnzxAnVplsVfiPwType | read-create | current | Two PEs need to negotiate pseudo wire type when they establish PW.There are two types of PWs in VPLS which are ethernet and ethernet-vlan.The former one suppor… |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.4 | ColumnzxAnVplsVfiMaxMacLearningNum | read-create | current | Max MAC learning number. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.5 | ColumnzxAnVplsVfiRemoteMacAgingTime | read-create | current | Remote MAC aging time. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.6 | ColumnzxAnVplsVfiLocalMacAgingTime | read-create | current | Local MAC aging time. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.7 | ColumnzxAnVplsVfiBCastRateLimit | read-create | current | Broadcast rate limit. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.8 | ColumnzxAnVplsVfiMCastRateLimit | read-create | current | Multicast rate limit. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.9 | ColumnzxAnVplsVfiUnknownUCastRateLimit | read-create | current | Unknown unicast rate limit. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.10 | ColumnzxAnVplsVfiVcidType | read-create | current | VCID Type, default value is dynamic. If VCID type configured here is static, it indicates the VPLS domain is static too. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.11 | ColumnzxAnVplsVfiPwe3CWPreferred | read-create | current | It indicates LDP entity prefers to use control word or not in PW. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.12 | ColumnzxAnVplsVfiVccvEnable | read-create | current | VCCV(Virtual Circuit Connectivity Verification) enable switch. VCCV provides a control channel that is associated with a pseudowire (PW), as well as the corres… |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.13 | ColumnzxAnVplsVfiCcTypeCapability | read-only | current | Control Channel(CC) types Capability, it indicates which CC types are supported. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.14 | ColumnzxAnVplsVfiCvTypeCapability | read-only | current | Connectivity Verification (CV) Types Capability, it indicates which CV types are supported. |
| 1.3.6.1.4.1.3902.1015.59.3.11.1.30 | ColumnzxAnVplsVfiRowStatus | read-create | current | The rowstatus of zxAnVplsVfiConfigTable |
| 1.3.6.1.4.1.3902.1015.59.3.12 | TablezxAnVplsVfiPeerIpAddrTable | not-accessible | current | VPLS VFI peer address config table. |
| 1.3.6.1.4.1.3902.1015.59.3.12.1 | RowzxAnVplsVfiPeerIpAddrEntry | not-accessible | current | VPLS VFI peer address entry. |
| 1.3.6.1.4.1.3902.1015.59.3.12.1.1 | ColumnzxAnVplsVfiPeerIpAddrType | not-accessible | current | VPLS VFI peer address type. |
| 1.3.6.1.4.1.3902.1015.59.3.12.1.2 | ColumnzxAnVplsVfiPeerIpAddr | not-accessible | current | This configures VFI parameterpeer. It is required to designate all PE addresses in one VPLS region. |
| 1.3.6.1.4.1.3902.1015.59.3.12.1.3 | ColumnzxAnVplsVfiStandbyPeerIpAddrType | read-create | current | VPLS VFI standby peer address type. |
| 1.3.6.1.4.1.3902.1015.59.3.12.1.4 | ColumnzxAnVplsVfiStandbyPeerIpAddr | read-create | current | Standby Peer Ip Address. |
| 1.3.6.1.4.1.3902.1015.59.3.12.1.5 | ColumnzxAnVplsVfiStaticPwName | read-create | current | Static pseudo wire name.VFI will use the pseudo wire which you configured.If not specified pseudo wire name, VFI will learn pseudo wire. |
| 1.3.6.1.4.1.3902.1015.59.3.12.1.6 | ColumnzxAnVplsVfiPwNetType | read-create | current | This configures L2VPN VPLS using static pseudo wire in VFI configuration mode, hub by default. |
| 1.3.6.1.4.1.3902.1015.59.3.12.1.20 | ColumnzxAnVplsVfiPeerRowStatus | read-create | current | The rowstatus of zxAnVplsVfiPeerIpAddrTable |
| 1.3.6.1.4.1.3902.1015.59.3.13 | TablezxAnL3IfVfiConfigTable | not-accessible | current | L3 interface vfi config table. |
| 1.3.6.1.4.1.3902.1015.59.3.13.1 | RowzxAnL3IfVfiConfigEntry | not-accessible | current | T |
| 1.3.6.1.4.1.3902.1015.59.3.13.1.1 | ColumnzxAnL3IfVfiIfIndex | not-accessible | current | A unique value for each interface. The field of interface type in ZxAnIfindex for L3 is 0xF(Layer 3 interface). |
| 1.3.6.1.4.1.3902.1015.59.3.13.1.2 | ColumnzxAnL3IfVfiName | read-create | current | This value is a record of zxAnVplsVfiConfigTable. |
| 1.3.6.1.4.1.3902.1015.59.3.13.1.20 | ColumnzxAnL3IfVfiRowStatus | read-create | current | Row status of zxAnL3IfVfiConfigTable. |
| 1.3.6.1.4.1.3902.1015.59.3.14 | TablezxAnVplsVfiMacTable | not-accessible | current | VFI MAC table config. |
| 1.3.6.1.4.1.3902.1015.59.3.14.1 | RowzxAnVplsVfiMacEntry | not-accessible | current | The entry of zxAnVplsVfiMacTable |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.1 | ColumnzxAnVplsVfiMacAddrType | not-accessible | current | A MAC address type,such as dynamic or static MAC. |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.2 | ColumnzxAnVplsVfiMacAddr | not-accessible | current | The local or remote MAC address. |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.3 | ColumnzxAnVplsVfiMacAddrConfLocation | read-create | current | MAC address can be configured at AC(local) or pseudo wire(remote). |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.4 | ColumnzxAnVplsVfiMacL3IfVlanIndex | read-create | current | L3 interface vlan id.It configured when zxAnVplsVfiMacAddrLocation is local. |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.5 | ColumnzxAnVplsVfiMacPeerIpAddrType | read-create | current | VPLS VFI peer ip Address type. |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.6 | ColumnzxAnVplsVfiMacPeerIpAddr | read-create | current | VFI peer ip address.It will be configured when zxAnVplsVfiMacAddrLocation is remote. |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.7 | ColumnzxAnVplsVfiMacInnerOutgoingLabel | read-only | current | When zxAnVplsVfiMacAddrLocation value is remote, zxAnVplsVfiMacInnerOutgoingLabel has virtual value. |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.8 | ColumnzxAnVplsVfiMacOuterOutgoingLabel | read-only | current | When zxAnVplsVfiMacAddrLocation value is remote, zxAnVplsVfiMacOuterOutgoingLabel has virtual value. |
| 1.3.6.1.4.1.3902.1015.59.3.14.1.30 | ColumnzxAnVplsVfiMacRowStatus | read-create | current | The row status of zxAnVplsVfiMacTable. When zxAnVplsVfiMacAddrType is dynamic,zxAnVplsVfiMacRowStatus can not be set DELETE. |
| 1.3.6.1.4.1.3902.1015.59.4 | NodezxAnTdmRelayObjects | |||
| 1.3.6.1.4.1.3902.1015.59.4.11 | TablezxAnTRPwTable | not-accessible | current | This table specifies information for configuring and status monitoring which are common to all service types and PSN types. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1 | RowzxAnTRPwEntry | not-accessible | current | A row in this table represents a pseudo wire (PW) virtual connection across a packet network. It is indexed by zxPwIndex, which uniquely identifying a singular… |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.1 | ColumnzxAnTRPwIndex | not-accessible | current | Index for the conceptual row identifying a PW within this PW Emulation table. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.2 | ColumnzxAnTRPwType | read-create | current | This value indicates the service to be carried over this PW. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.3 | ColumnzxAnTRPwPsnType | read-create | current | Set by the operator to indicates the PSN type. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.4 | ColumnzxAnTRPwPeerIpAddrType | read-create | current | Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.5 | ColumnzxAnTRPwPeerIpAddr | read-create | current | This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not appli… |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.6 | ColumnzxAnTRPwPeerVcId | read-create | current | Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.7 | ColumnzxAnTRPwStandbyPeerIpAddrType | read-create | current | Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.8 | ColumnzxAnTRPwStandbyPeerIpAddr | read-create | current | This object contains the value of the standby peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if n… |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.9 | ColumnzxAnTRPwStandbyPeerVcId | read-create | current | Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.10 | ColumnzxAnTRPwOutboundLabel | read-create | current | The PW label used in the outbound direction (i.e. toward the PSN). It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPL… |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.11 | ColumnzxAnTRPwInboundLabel | read-create | current | The PW label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherwise. Exam… |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.12 | ColumnzxAnTRPwOutboundTunnelLabel | read-create | current | The MPLS Outbound Tunnel Label. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.13 | ColumnzxAnTRPwInboundTunnelLabel | read-create | current | The MPLS Inbound Tunnel Label. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.14 | ColumnzxAnTRPwPayloadSize | read-create | current | The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amou… |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.15 | ColumnzxAnTRPwDstMac | read-create | current | The destination MAC address of a pseudo wire (PW) virtual connection. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.16 | ColumnzxAnTRPwVlanId | read-create | current | This value indicates the vlan. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.17 | ColumnzxAnTRPwPrio | read-create | current | This value indicates the priority. |
| 1.3.6.1.4.1.3902.1015.59.4.11.1.30 | ColumnzxAnTRPwRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.3902.1015.59.4.12 | TablezxAnTRTdmSrcMacTable | not-accessible | current | This table specifies information for configuring TDM source MAC address. |
| 1.3.6.1.4.1.3902.1015.59.4.12.1 | RowzxAnTRTdmSrcMacEntry | not-accessible | current | An entry for zxAnTRTdmSrcMacTable. |
| 1.3.6.1.4.1.3902.1015.59.4.12.1.1 | ColumnzxAnTRTdmSrcRackNo | not-accessible | current | Rack number. |
| 1.3.6.1.4.1.3902.1015.59.4.12.1.2 | ColumnzxAnTRTdmSrcShelfNo | not-accessible | current | Shelf number. |
| 1.3.6.1.4.1.3902.1015.59.4.12.1.3 | ColumnzxAnTRTdmSrcSlotNo | not-accessible | current | Slot number. |
| 1.3.6.1.4.1.3902.1015.59.4.12.1.4 | ColumnzxAnTRTdmSrcMac | read-write | current | This value indicates the TDM source MAC address. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ZxAnMplsVccvCcType | BITS { pwAch(0), mplsRouterAlertLbl(1), mplsPwLblTtlEqualsOne(2), reserved1(3), reserved2(4), reserved3(5), reserved4(6), reserved5(7) } | current | Control Channel (CC) types: pwAch(0) (0x01) - Type 1: PWE3 Control Word with 0001b as first nibble(PW-ACH, see [RFC4385]) mplsRouterAlertLbl(1) (0x02) - Type 2: MPLS Router Alert Label mplsPwLblTtlEqualsOne(2) (0x04) - … |
| ZxAnMplsVccvCvType | BITS { icmpPing(0), lspPing(1), bfd(2), reserved1(3), reserved2(4), reserved3(5), reserved4(6), reserved5(7) } | current | Connectivity Verification (CV) Types: icmpPing(0) (0x01) - ICMP Ping lspPing(1) (0x02) - LSP Ping bfd(2) (0x04) - BFD Bit 3 (0x08) - Reserved Bit 4 (0x10) - Reserved Bit 5 (0x20) - Reserved Bit 6 (0x40) - Reserved Bit 7… |