MIB Viewer

ZTE-AN-MULTICAST-TEST-MIB

27 objects
The MIB module for the management of multicast test.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressType
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCRowStatus
ZTE-AN-TC-MIBzxAn
OIDNameAccessStatusDescription
1.3.6.1.4.1.3902.1015.28IdentityzxAnMulticastTestMibThe MIB module for the management of multicast test.
1.3.6.1.4.1.3902.1015.28.1NodezxAnMulticastTestGlobalObjects
1.3.6.1.4.1.3902.1015.28.1.1ScalarzxAnMulticastTestCapabilitiesread-onlycurrentThe multicast test capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. NOTE: No recommen…
1.3.6.1.4.1.3902.1015.28.2NodezxAnMulticastTestObjects
1.3.6.1.4.1.3902.1015.28.2.1NodezxAnMulticastIfTest
1.3.6.1.4.1.3902.1015.28.2.1.2TablezxAnMulticastIfTestTablenot-accessiblecurrentThe table listing multicast test entries. An entry indicates a test.
1.3.6.1.4.1.3902.1015.28.2.1.2.1RowzxAnMulticastIfTestEntrynot-accessiblecurrentAn entry in the zxAnMulticastIfTestTable.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.1ColumnzxAnMulticastIfTestRacknot-accessiblecurrentRack No. of the interface.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.2ColumnzxAnMulticastIfTestShelfnot-accessiblecurrentShelf No. of the interface.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.3ColumnzxAnMulticastIfTestSlotnot-accessiblecurrentSlot No. of the interface.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.4ColumnzxAnMulticastIfTestPortnot-accessiblecurrentPhysical port No. of the interface.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.5ColumnzxAnMulticastIfTestOnunot-accessiblecurrentONU No. of the interface. It is valid only if zxAnMulticastIfTestIfType is 'ponOnu' or 'portVPort' or 'onuUni' or 'servicePort', otherwise, its value is 0.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.6ColumnzxAnMulticastIfTestIfTypenot-accessiblecurrentType of the interface.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.7ColumnzxAnMulticastIfTestLogicalIdnot-accessiblecurrentLogic index of the interface. If zxAnMulticastIfTestIfType is 'physicalPort', its value is 0. If zxAnMulticastIfTestIfType is 'bridgePort', this object indicat…
1.3.6.1.4.1.3902.1015.28.2.1.2.1.8ColumnzxAnMulticastIfTestMvlanIdread-createcurrentThe VLAN of interface which will be used in testing datagram. Value 0 means untagged.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.9ColumnzxAnMulticastIfTestGroupIpTyperead-createcurrentMulticast group IP address type.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.10ColumnzxAnMulticastIfTestGroupIpread-createcurrentMulticast group IP address. The multicast group must be created first. If can not find the multicast group, test fail.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.11ColumnzxAnMulticastIfTestPriorityread-createcurrentThe priority of interface which will be used in testing datagram.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.12ColumnzxAnMulticastIfTestDurationread-createcurrentThe duration of test.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.20ColumnzxAnMulticastIfTestStatusread-onlycurrentThe status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - test is not started in…
1.3.6.1.4.1.3902.1015.28.2.1.2.1.21ColumnzxAnMulticastIfTestFailedReasonread-onlycurrentThe failed reason of test. none(1) - No error. pvcNotExist(2) - Specified PVC does not exist. mvlanNotExist(3) - Specified MVLAN does not exist. groupNotExist(…
1.3.6.1.4.1.3902.1015.28.2.1.2.1.23ColumnzxAnMulticastIfTestBwAfterJoinread-onlycurrentThe bandwidth of multicast traffic after join operation. Notes:there is a possibility that the units of this object maybe is different, so the units are not sp…
1.3.6.1.4.1.3902.1015.28.2.1.2.1.24ColumnzxAnMulticastIfTestBwAfterLeaveread-onlycurrentThe bandwidth of multicast traffic after leave operation. Notes:there is a possibility that the units of this object maybe is different, so the units are not s…
1.3.6.1.4.1.3902.1015.28.2.1.2.1.25ColumnzxAnMulticastIfTestBwUnitread-onlycurrentThe unit of bandwidth of multicast traffic.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.26ColumnzxAnMulticastIfTestMcastPktsread-onlycurrentMulticast packets counter of successful test.
1.3.6.1.4.1.3902.1015.28.2.1.2.1.30ColumnzxAnMulticastIfTestActionread-createcurrentThe object is used to start or stop test. The object could be specified when creating an entry, also could be specified alone in a SET operation. start(1) - St…
1.3.6.1.4.1.3902.1015.28.2.1.2.1.50ColumnzxAnMulticastIfTestRowStatusread-createcurrentThe status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b…