ZTE-AN-PETH-MIB
48 objects
This MIB defines Description of zte power ethernet managed objects.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| ZTE-AN-TC-MIB | zxAn |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.300 | IdentityzxAnPethMib | This MIB defines Description of zte power ethernet managed objects. | ||
| 1.3.6.1.4.1.3902.1015.300.1 | NodezxAnPethObjects | |||
| 1.3.6.1.4.1.3902.1015.300.1.1 | NodezxAnPethGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.300.1.1.1 | ScalarzxAnPethPsePmMode | read-write | current | The power management mode. Possible values are: none (1) - Power management is not performed by default, The user must power-up the port manually. staticPowerW… |
| 1.3.6.1.4.1.3902.1015.300.1.1.2 | ScalarzxAnPethPseActualCurrent | read-only | current | The actual momentary current. |
| 1.3.6.1.4.1.3902.1015.300.1.1.3 | ScalarzxAnPethPseActualVoltage | read-only | current | The actual momentary input line voltage. |
| 1.3.6.1.4.1.3902.1015.300.1.1.4 | ScalarzxAnPethPseChipTemp | read-only | current | The temperature of the PSE chip. |
| 1.3.6.1.4.1.3902.1015.300.1.1.5 | ScalarzxAnPethPseChipTempAlmThresh | read-write | current | The temperature alarm threshold of the PSE chip. |
| 1.3.6.1.4.1.3902.1015.300.1.1.6 | ScalarzxAnPethPseChipTempTrapEnable | read-write | current | Enable/disable the zxAnPethPseChipHighTempAlm and zxAnPethPseChipHighTempClr. |
| 1.3.6.1.4.1.3902.1015.300.1.1.7 | ScalarzxAnPethPseOutVoltageUpperThresh | read-write | current | The upper threshold of PSE output volts. The alarm should be generated when zxAnPethPseActualVoltage exceeds this threshold. zxAnPethPseOutVoltageUpperThresh m… |
| 1.3.6.1.4.1.3902.1015.300.1.1.8 | ScalarzxAnPethPseOutVoltageLowerThresh | read-write | current | The lower threshold of PSE output volts. The alarm should be generated when zxAnPethPseActualVoltage is lower than this threshold. zxAnPethPseOutVoltageLowerTh… |
| 1.3.6.1.4.1.3902.1015.300.1.1.9 | ScalarzxAnPethPseFirmwareVersion | read-only | current | The PSE firmware version. |
| 1.3.6.1.4.1.3902.1015.300.1.1.10 | ScalarzxAnPethMainPsePowerLimit | read-write | current | The power threshhold of PSE output. |
| 1.3.6.1.4.1.3902.1015.300.1.1.11 | ScalarzxAnPethMainPsePowerUsageThresh | read-write | current | The PSE power usage threshold. When pethMainPseConsumptionPower is larger than zxAnPethMainPsePowerUsageThresh, pethMainPowerUsageOnNotification will be sent. … |
| 1.3.6.1.4.1.3902.1015.300.1.2 | TablezxAnPethPsePortTable | not-accessible | current | Peth Port Table |
| 1.3.6.1.4.1.3902.1015.300.1.2.1 | RowzxAnPethPsePortEntry | not-accessible | current | Peth Port Entry |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.1 | ColumnzxAnPethPsePortForcePowerEnable | read-write | current | Enable/disable force power on this interface. and force power on the specified port without detection. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.2 | ColumnzxAnPethPsePortActualVoltage | read-only | current | The actual voltage of this port. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.3 | ColumnzxAnPethPsePortActualCurrent | read-only | current | The actual current of this port. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.4 | ColumnzxAnPethPsePortActualPower | read-only | current | The actual power of this port. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.5 | ColumnzxAnPethPsePortMaxPower | read-write | current | The maximum power of this port. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.6 | ColumnzxAnPethPsePortDetectionType | read-write | current | Describes the detection type of the port PD detection. NoDetection indicates force power on the port without detection, LegacyOnly indicates legacy detection o… |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.7 | ColumnzxAnPethPsePortWorkMode | read-only | current | PSE port working mode. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.8 | ColumnzxAnPethPsePortReset | read-write | current | Reset port. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.9 | ColumnzxAnPethPsePortOperStatus | read-only | current | PSE port operational status. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.10 | ColumnzxAnPethPsePortDetailInfo | read-only | current | PSE port detail information. When zxAnPethPsePortOperStatus is 'down', this object will be show the detail information of port. |
| 1.3.6.1.4.1.3902.1015.300.1.2.1.11 | ColumnzxAnPethPsePortTrapEnable | read-write | current | Enable/disable the zxAnPethPsePortStatusUp and zxAnPethPsePortStatusDown. |
| 1.3.6.1.4.1.3902.1015.300.1.3 | TablezxAnPethPseCardTable | not-accessible | current | Peth Card Table |
| 1.3.6.1.4.1.3902.1015.300.1.3.1 | RowzxAnPethPseCardEntry | not-accessible | current | Peth Card Entry |
| 1.3.6.1.4.1.3902.1015.300.1.3.1.1 | ColumnzxAnPethPseRack | not-accessible | current | Rack No. |
| 1.3.6.1.4.1.3902.1015.300.1.3.1.2 | ColumnzxAnPethPseShelf | not-accessible | current | Shelf No. |
| 1.3.6.1.4.1.3902.1015.300.1.3.1.3 | ColumnzxAnPethPseSlot | not-accessible | current | Card No. |
| 1.3.6.1.4.1.3902.1015.300.1.3.1.4 | ColumnzxAnPethPseCardSupportPoe | read-only | current | This variable indicates whether the card supports PoE management. |
| 1.3.6.1.4.1.3902.1015.300.1.4 | TablezxAnPethPdePortTable | not-accessible | current | PDE(Power Device Equipment) port information. |
| 1.3.6.1.4.1.3902.1015.300.1.4.1 | RowzxAnPethPdePortEntry | not-accessible | current | PDE port entry. |
| 1.3.6.1.4.1.3902.1015.300.1.4.1.1 | ColumnzxAnPethPdePortAutoCheckEnable | read-write | current | Enable/disable to check port power status automatically. |
| 1.3.6.1.4.1.3902.1015.300.1.4.1.2 | ColumnzxAnPethPdePortPowerSupplyStatus | read-only | current | The port power status. |
| 1.3.6.1.4.1.3902.1015.300.2 | NodezxAnPethTrapObjects | |||
| 1.3.6.1.4.1.3902.1015.300.2.1 | NotificationzxAnPethPseChipHighTempAlm | current | The PSE chip temperature has exceeded normal operating temperature zxAnPethPseChipTempAlmThresh. The zxAnPethPseChipTemp object identifies the current status. | |
| 1.3.6.1.4.1.3902.1015.300.2.2 | NotificationzxAnPethPseChipHighTempClr | current | The PSE chip temperature has returned to normal operating temperature zxAnPethPseChipTempAlmThresh. The zxAnPethPseChipTemp object identifies the current statu… | |
| 1.3.6.1.4.1.3902.1015.300.2.3 | NotificationzxAnPethPsePortStatusUp | current | A zxAnPethPsePortStatusUp is sent when zxAnPethPsePortOperStatus changes to up. | |
| 1.3.6.1.4.1.3902.1015.300.2.4 | NotificationzxAnPethPsePortStatusDown | current | A zxAnPethPsePortStatusDown is sent when zxAnPethPsePortOperStatus changes to down. | |
| 1.3.6.1.4.1.3902.1015.300.2.5 | NotificationzxAnPethPseOverVoltageAlm | current | It indicates that the PSE voltage is over-voltage. | |
| 1.3.6.1.4.1.3902.1015.300.2.6 | NotificationzxAnPethPseOverVoltageClr | current | It indicates that the over-voltage fault is cleared. | |
| 1.3.6.1.4.1.3902.1015.300.2.7 | NotificationzxAnPethPseUnderVoltageAlm | current | It indicates that the PSE voltage is under-voltage. | |
| 1.3.6.1.4.1.3902.1015.300.2.8 | NotificationzxAnPethPseUnderVoltageClr | current | It indicates that the under-voltage fault is cleared. | |
| 1.3.6.1.4.1.3902.1015.300.2.9 | NotificationzxAnPethPdePortPowerOffAlm | current | A zxAnPethPdePortPowerOffAlm is sent when zxAnPethPdePortPowerStatus is off(2). | |
| 1.3.6.1.4.1.3902.1015.300.2.10 | NotificationzxAnPethPdePortPowerOffClr | current | A zxAnPethPdePortPowerOffClr is sent when zxAnPethPdePortPowerOffAlm is cleared. |