ZTE-AN-SECURITY-SERVICE-MIB
194 objects
This MIB defines zte Access Node managed objects.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| ZTE-AN-TC-MIB | VlanId zxAn ZxAnIfindex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.11 | IdentityzxAnSecSvcMib | This MIB defines zte Access Node managed objects. | ||
| 1.3.6.1.4.1.3902.1015.11.1 | NodezxAnSecSvcObjects | |||
| 1.3.6.1.4.1.3902.1015.11.1.1 | NodezxAnSecSvcAntiAttack | |||
| 1.3.6.1.4.1.3902.1015.11.1.1.1 | NodezxAnSecSvcAntiDosMgmt | |||
| 1.3.6.1.4.1.3902.1015.11.1.1.1.1 | ScalarzxAnSecSvcAntiDosAdminState | read-write | current | The desired state of the anti-dos.If the state is disable, anti-dos doesnot work up,and also there will be not any alarm raised. |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.2 | ScalarzxAnSecSvcAntiDosDropState | read-write | current | The desired state of the drop packets.If the state is enable, system will discard packets from MAC which in blacklist. |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.3 | ScalarzxAnSecSvcAntiDosCurrentPackets | read-only | current | The current packets per second that system checking. |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.4 | ScalarzxAnSecSvcAntiDosAscThreshold | read-write | current | The threshold that if current packets per second over it, system will put the source MAC of packet into blacklist and raise a alarm. |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.5 | ScalarzxAnSecSvcAntiDosDescThreshold | read-write | current | The threshold that if current packets per second below it, system will remove the source MAC of packet from blacklist and raise a alarm restore. |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.6 | ScalarzxAnSecSvcAntiDosSourceMac | read-only | current | The source MAC of packets,which will put into blacklist or remove from blaklist. |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.7 | ScalarzxAnSecSvcAntiDosPortVlan | read-only | current | The port VLAN that attack packet from. |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.8 | ScalarzxAnSecSvrAntiDosBlockDuration | read-write | current | Blocking duration indicates how long the packet which the source MAC address is in the blacklist is blocked. When zxAnSecSvcAntiDosDropState is enabled(1), the… |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.9 | ScalarzxAnSecAntiDosPktLmtByHwEnable | read-write | current | Enable/disable the packet limit by hardware. |
| 1.3.6.1.4.1.3902.1015.11.1.1.1.10 | ScalarzxAnSecAntiDosVportShutdownDur | read-write | current | VPort shutdown duration. The VPort will be shutdown when receiving the packets which the source MAC address is in the blacklist. Value 0 means not to shutdown … |
| 1.3.6.1.4.1.3902.1015.11.1.2 | NodezxAnSecSvcPktLimit | |||
| 1.3.6.1.4.1.3902.1015.11.1.2.1 | ScalarzxAnSecSvcPacketLimitAllEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.2 | ScalarzxAnSecSvcPacketLimitAll | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.3 | ScalarzxAnSecSvcPacketLimitArpEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.4 | ScalarzxAnSecSvcPacketLimitArp | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.5 | ScalarzxAnSecSvcPacketLimitIcmpEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.6 | ScalarzxAnSecSvcPacketLimitIcmp | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.7 | ScalarzxAnSecSvcPacketLimitIgmpEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.8 | ScalarzxAnSecSvcPacketLimitIgmp | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.9 | ScalarzxAnSecSvcPacketLimitBpduEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.10 | ScalarzxAnSecSvcPacketLimitBpdu | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.11 | ScalarzxAnSecSvcPacketLimitDhcpEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.12 | ScalarzxAnSecSvcPacketLimitDhcp | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.13 | ScalarzxAnSecSvcPacketLimitVbasEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.14 | ScalarzxAnSecSvcPacketLimitVbas | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.15 | ScalarzxAnSecSvcPacketLimitPPPOEEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.16 | ScalarzxAnSecSvcPacketLimitPPPOE | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.17 | ScalarzxAnSecSvcPacketLimitSNMPEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.18 | ScalarzxAnSecSvcPacketLimitSNMP | read-write | current | |
| 1.3.6.1.4.1.3902.1015.11.1.2.19 | ScalarzxAnSecSvcPktLimitV6IcmpEnable | read-write | current | The IPv6 ICMP packets rate limit switch. It will limit ICMPv6 rate first when zxAnSecSvcPktLimitV6IcmpEnable is enabled and at least one of the other four subt… |
| 1.3.6.1.4.1.3902.1015.11.1.2.20 | ScalarzxAnSecSvcPktLimitV6Icmp | read-write | current | The maximum packets per second of IPv6 ICMP and unit is pps. It can be set value when zxAnSecSvcPktLimitV6IcmpEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.21 | ScalarzxAnSecSvcPktLimitV6NsEnable | read-write | current | The neighbor solicitation packets rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.22 | ScalarzxAnSecSvcPktLimitV6Ns | read-write | current | The maximum packets per second of neighbor solicitation and unit is pps. It can be set value when zxAnSecSvcPktLimitV6NsEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.23 | ScalarzxAnSecSvcPktLimitV6NaEnable | read-write | current | The neighbor advertisement packets rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.24 | ScalarzxAnSecSvcPktLimitV6Na | read-write | current | The maximum packets per second of neighbor advertisement and unit is pps. It can be set value when zxAnSecSvcPktLimitV6NaEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.25 | ScalarzxAnSecSvcPktLimitV6RsEnable | read-write | current | The router solicitation packets rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.26 | ScalarzxAnSecSvcPktLimitV6Rs | read-write | current | The maximum packets per second of router solicitation and unit is pps. It can be set value when zxAnSecSvcPktLimitV6RsEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.27 | ScalarzxAnSecSvcPktLimitV6RaEnable | read-write | current | The router advertisement packets rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.28 | ScalarzxAnSecSvcPktLimitV6Ra | read-write | current | The maximum packets per second of router advertisement and unit is pps. It can be set value when zxAnSecSvcPktLimitV6RaEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.29 | ScalarzxAnSecSvcPktLimitV6DhcpEnable | read-write | current | The IPv6 DHCP packets rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.30 | ScalarzxAnSecSvcPktLimitV6Dhcp | read-write | current | The maximum packets per second of IPv6 DHCP and unit is pps. It can be set value when zxAnSecSvcPktLimitV6DhcpEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.31 | ScalarzxAnSecSvcPktLimitSshEnable | read-write | current | The SSH packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.32 | ScalarzxAnSecSvcPktLimitSsh | read-write | current | The SSH packet rate limit. It can be set value when zxAnSecSvcPktLimitSshEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.33 | ScalarzxAnSecSvcPktLimitTelnetEnable | read-write | current | The telnet packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.34 | ScalarzxAnSecSvcPktLimitTelnet | read-write | current | The telnet packet rate limit. It can be set value when zxAnSecSvcPktLimitTelnetEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.35 | ScalarzxAnSecSvcPktLimitBfdEnable | read-write | current | The bidirectional forwarding detection packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.36 | ScalarzxAnSecSvcPktLimitBfd | read-write | current | The bidirectional forwarding detection packet rate limit. It can be set value when zxAnSecSvcPktLimitBfdEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.37 | ScalarzxAnSecSvcPktLimitZesrEnable | read-write | current | The ZTE ethernet switch ring packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.38 | ScalarzxAnSecSvcPktLimitZesr | read-write | current | The ZTE ethernet switch ring packet rate limit. It can be set value when zxAnSecSvcPktLimitZesrEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.39 | ScalarzxAnSecSvcPktLimitStpEnable | read-write | current | The spanning tree protocol packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.40 | ScalarzxAnSecSvcPktLimitStp | read-write | current | The spanning tree protocol packet rate limit. It can be set value when zxAnSecSvcPktLimitStpEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.41 | ScalarzxAnSecSvcPktLimitLacpEnable | read-write | current | The link aggregation control protocol packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.42 | ScalarzxAnSecSvcPktLimitLacp | read-write | current | The link aggregation control protocol packet rate limit. It can be set value when zxAnSecSvcPktLimitLacpEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.43 | ScalarzxAnSecSvcPktLimitLldpEnable | read-write | current | The link layer discovery protocol packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.44 | ScalarzxAnSecSvcPktLimitLldp | read-write | current | The link layer discovery protocol packet rate limit. It can be set value when zxAnSecSvcPktLimitLldpEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.45 | ScalarzxAnSecSvcPktLimitRipEnable | read-write | current | The routing information protocol packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.46 | ScalarzxAnSecSvcPktLimitRip | read-write | current | The routing information protocol packet rate limit. It can be set value when zxAnSecSvcPktLimitRipEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.47 | ScalarzxAnSecSvcPktLimitBgpEnable | read-write | current | The border gateway protocol packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.48 | ScalarzxAnSecSvcPktLimitBgp | read-write | current | The border gateway protocol packet rate limit. It can be set value when zxAnSecSvcPktLimitBgpEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.49 | ScalarzxAnSecSvcPktLimitOspfEnable | read-write | current | The open shortest path first packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.50 | ScalarzxAnSecSvcPktLimitOspf | read-write | current | The open shortest path first packet rate limit. It can be set value when zxAnSecSvcPktLimitOspfEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.51 | ScalarzxAnSecSvcPktLimitIsisEnable | read-write | current | The intermediate system to intermediate system packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.52 | ScalarzxAnSecSvcPktLimitIsis | read-write | current | The intermediate system to intermediate system packet rate limit. It can be set value when zxAnSecSvcPktLimitIsisEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.53 | ScalarzxAnSecSvcPktLimitLdpEnable | read-write | current | The label distribution protocol packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.54 | ScalarzxAnSecSvcPktLimitLdp | read-write | current | The label distribution protocol packet rate limit. It can be set value when zxAnSecSvcPktLimitLdpEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.2.55 | ScalarzxAnSecSvcPktLimitCfmEnable | read-write | current | The connectivity fault management packet rate limit switch. |
| 1.3.6.1.4.1.3902.1015.11.1.2.56 | ScalarzxAnSecSvcPktLimitCfm | read-write | current | The connectivity fault management packet rate limit. It can be set value when zxAnSecSvcPktLimitCfmEnable is enabled. |
| 1.3.6.1.4.1.3902.1015.11.1.3 | NodezxAnSecSvcMacAntiSnoofing | |||
| 1.3.6.1.4.1.3902.1015.11.1.3.1 | ScalarzxAnMasEnable | read-write | current | Enable or disable Mac drift.1-truth,2-false. |
| 1.3.6.1.4.1.3902.1015.11.1.3.2 | ScalarzxAnMasUplinkProtectEnable | read-write | current | Enable or disable uplink protect Mac drift. |
| 1.3.6.1.4.1.3902.1015.11.1.3.3 | TablezxAnGlobalMacAntiSpfMacTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.11.1.3.3.1 | RowzxAnGlobalMacAntiSpfMacEntry | not-accessible | current | An entry containing anti drift mac address information. |
| 1.3.6.1.4.1.3902.1015.11.1.3.3.1.1 | ColumnzxAnGlobalMacAntiSpfMacAddress | not-accessible | current | MAC address |
| 1.3.6.1.4.1.3902.1015.11.1.3.3.1.50 | ColumnzxAnGlobalMacAntiSpfMacRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.3902.1015.11.1.3.4 | TablezxAnVlanMacAntiSpfTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.11.1.3.4.1 | RowzxAnVlanMacAntiSpfEntry | not-accessible | current | An entry containing anti drift mac address information. |
| 1.3.6.1.4.1.3902.1015.11.1.3.4.1.1 | ColumnzxAnVlanMacAntiSpfVlanId | not-accessible | current | mac address |
| 1.3.6.1.4.1.3902.1015.11.1.3.4.1.2 | ColumnzxAnVlanMacAntiSpfEnable | read-create | current | mac address |
| 1.3.6.1.4.1.3902.1015.11.1.3.4.1.3 | ColumnzxAnVlanMacAntiSpfType | read-create | current | mac address |
| 1.3.6.1.4.1.3902.1015.11.1.3.4.1.50 | ColumnzxAnVlanMacAntiSpfRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.3902.1015.11.1.3.5 | TablezxAnVlanMacAntiSpfMacTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.11.1.3.5.1 | RowzxAnVlanMacAntiSpfMacEntry | not-accessible | current | An entry containing anti drift mac address information. |
| 1.3.6.1.4.1.3902.1015.11.1.3.5.1.1 | ColumnzxAnVlanMacAntiSpfMacAddress | not-accessible | current | mac address |
| 1.3.6.1.4.1.3902.1015.11.1.3.5.1.50 | ColumnzxAnVlanMacAntiSpfMacRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.3902.1015.11.1.3.50 | NodezxAnSecSvcMacAntiSpfGlobalObject | |||
| 1.3.6.1.4.1.3902.1015.11.1.3.50.1 | ScalarzxAnMasMacMoveReportEnable | read-write | current | Enable or disable zxAnIfMacDriftTrap and zxAnIfMacAntiDriftNotify. |
| 1.3.6.1.4.1.3902.1015.11.1.3.50.2 | ScalarzxAnSecSvcMacDriftAddress | read-only | current | Indicates the MAC address that is drifted between zxAnSecSvcMacDriftFromIfIndex and zxAnSecSvcMacDriftToIfIndex on zxAnSecSvcMacDriftVlanId. This object is ins… |
| 1.3.6.1.4.1.3902.1015.11.1.3.50.3 | ScalarzxAnSecSvcMacDriftVlanId | read-only | current | Indicates the VLAN on which the zxAnSecSvcMacDriftAddress is drifted from zxAnSecSvcMacDriftFromIfIndex to zxAnSecSvcMacDriftToIfIndex. This object is instanti… |
| 1.3.6.1.4.1.3902.1015.11.1.3.50.4 | ScalarzxAnSecSvcMacDriftFromIfIndex | read-only | current | The value of the port from which the zxAnSecSvcMacDriftAddress is drifted to zxAnSecSvcMacDriftToIfIndex on zxAnSecSvcMacDriftVlanId. This object is instantiat… |
| 1.3.6.1.4.1.3902.1015.11.1.3.50.5 | ScalarzxAnSecSvcMacDriftToIfIndex | read-only | current | The value of the port to which the zxAnSecSvcMacDriftAddress is drifted from zxAnSecSvcMacDriftFromIfIndex on zxAnSecSvcMacDriftVlanId. This object is instanti… |
| 1.3.6.1.4.1.3902.1015.11.1.3.50.6 | ScalarzxAnMasMacMoveReportInterval | read-write | current | The report interval of zxAnIfMacAntiDriftNotify which has the same VLAN and MAC address. |
| 1.3.6.1.4.1.3902.1015.11.1.4 | NodezxAnSecSvcPrivateNetwork | |||
| 1.3.6.1.4.1.3902.1015.11.1.4.1 | ScalarzxAnSecSvcPortInterworkInVlan | read-write | current | This function in order to connect private network in accordance with the specified VLAN .The use of 512-octet specifies 4094 VLAN. Each octet within this field… |
| 1.3.6.1.4.1.3902.1015.11.1.4.2 | ScalarzxAnSecGlbVlanIsolationEnable | read-write | current | This object is in accordance with 'zxAnSecSvcPortInterworkInVlan', if the value is true then indicates 'zxAnSecSvcPortInterworkInVlan' is enable. |
| 1.3.6.1.4.1.3902.1015.11.1.4.3 | ScalarzxAnSecSvcPortBridgeEnable | read-write | current | This object is in accordance with 'zxAnSecSvcPortBridgeEnable', if the value is true then indicates 'zxAnSecSvcPortBridgeEnable' is enable. |
| 1.3.6.1.4.1.3902.1015.11.1.4.4 | ScalarzxAnSecSvcOnuSwitchEnable | read-write | current | This object is in accordance with 'zxAnSecSvcOnuSwitchEnable', if the value is true then indicates 'zxAnSecSvcOnuSwitchEnable' is enable. |
| 1.3.6.1.4.1.3902.1015.11.1.4.5 | TablezxAnSecSvcInterworkVlanTable | not-accessible | current | When the value of 'zxAnSecGlbVlanIsolationEnable ' is enable,the table allowed be created,deleted,or the table can not be created and deleted. |
| 1.3.6.1.4.1.3902.1015.11.1.4.5.1 | RowzxAnSecSvcInterworkVlanEntry | not-accessible | current | An entry in zxAnSecSvcInterworkVlanTable. |
| 1.3.6.1.4.1.3902.1015.11.1.4.5.1.1 | ColumnzxAnSecVlanIsolationSVid | not-accessible | current | This object indicates SVLAN id |
| 1.3.6.1.4.1.3902.1015.11.1.4.5.1.2 | ColumnzxAnSecVlanIsolationCVid | not-accessible | current | This object indicates CVLAN id |
| 1.3.6.1.4.1.3902.1015.11.1.4.5.1.30 | ColumnzxAnSecVlanIsolationRowStatus | read-create | current | RowStatus of this table. |
| 1.3.6.1.4.1.3902.1015.11.1.5 | TablezxAnSecSvcVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.11.1.5.1 | RowzxAnSecSvcVlanEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.11.1.5.1.1 | ColumnzxAnSecSvcVlanId | not-accessible | current | VlanId for Vlan interface. |
| 1.3.6.1.4.1.3902.1015.11.1.5.1.5 | ColumnzxAnSecSvcVlanBroadcastRateLimit | read-create | current | Indicates broadcast rate-limit |
| 1.3.6.1.4.1.3902.1015.11.1.5.1.6 | ColumnzxAnSecSvcVlanMulticastRateLimit | read-create | current | Max Multicast rate limit. |
| 1.3.6.1.4.1.3902.1015.11.1.5.1.7 | ColumnzxAnSecSvcVlanUnknUcastRateLimit | read-create | current | Unknowcast rate limit. |
| 1.3.6.1.4.1.3902.1015.11.1.5.1.8 | ColumnzxAnSecSvcVlanMulticastFloodMode | read-create | current | Vlan multicast packets flooding mode. |
| 1.3.6.1.4.1.3902.1015.11.1.5.1.10 | ColumnzxAnSecSvcVlanRateLimitRowStatus | read-create | current | RowStatus of this table. |
| 1.3.6.1.4.1.3902.1015.11.1.6 | TablezxAnSecRsvdForwardMacTable | not-accessible | current | This table includes the reserved MAC for forwarding. |
| 1.3.6.1.4.1.3902.1015.11.1.6.1 | RowzxAnSecRsvdForwardMacEntry | not-accessible | current | An entry in zxAnSecRsvdForwardMacTable. |
| 1.3.6.1.4.1.3902.1015.11.1.6.1.1 | ColumnzxAnSecRsvdForwardMacIndex | not-accessible | current | This object indicates the mac index for forwarding. |
| 1.3.6.1.4.1.3902.1015.11.1.6.1.2 | ColumnzxAnSecRsvdForwardMac | read-create | current | This object indicates the mac address for forwarding. |
| 1.3.6.1.4.1.3902.1015.11.1.6.1.3 | ColumnzxAnSecRsvdForwardMacMask | read-create | current | This object indicates the mac address mask for forwarding. |
| 1.3.6.1.4.1.3902.1015.11.1.6.1.10 | ColumnzxAnSecRsvdForwardMacRowStatus | read-create | current | RowStatus of this table. |
| 1.3.6.1.4.1.3902.1015.11.1.7 | NodezxAnSecSvcIpSourceGuard | |||
| 1.3.6.1.4.1.3902.1015.11.1.7.1 | NodezxAnSecSvcSrcGuardGlobalGroup | |||
| 1.3.6.1.4.1.3902.1015.11.1.7.1.1 | ScalarzxAnIpSrcGuardGlobalEnable | read-write | current | This object indicates whether IP Source Guard is enabled. If this object is set to 'true', IP Source Guard is enabled. If this object is set to 'false', IP Sou… |
| 1.3.6.1.4.1.3902.1015.11.1.7.1.2 | ScalarzxAnSecSvcSrcGuardIpv4BindLimit | read-write | current | This object indicates the maximum number of IPv4 addresses per U reference point in the upstream.The total number of IPv4 and IPv6 can not exceed 8. |
| 1.3.6.1.4.1.3902.1015.11.1.7.1.3 | ScalarzxAnSecSvcSrcGuardIpv6BindLimit | read-write | current | This object indicates the maximum number of IPv6 prefixes per U reference point in the upstream.The total number of IPv4 and IPv6 can not exceed 8. |
| 1.3.6.1.4.1.3902.1015.11.1.7.1.4 | ScalarzxAnIpSrcGuardBindType | read-write | current | IP source guar binding type. ip(1) - IP source guard bind IP address only. IipAndMac(2) - IP source guard bind both IP address and MAC address. |
| 1.3.6.1.4.1.3902.1015.11.1.7.2 | TablezxAnSecSvcIfSrcGuardConfigTable | not-accessible | current | A table provides the mechanism to enable or disable IP Source Guard at each interface capable of this feature. When DHCP Snooping is enabled at an interface, a… |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1 | RowzxAnSecSvcIfSrcGuardConfigEntry | not-accessible | current | A row instance contains the configuration to enable or disable IP Source Guard at each physical interface capable of this feature. |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1.1 | ColumnzxAnSecSvcRack | not-accessible | current | This object indicates the rack number. |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1.2 | ColumnzxAnSecSvcShelf | not-accessible | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1.3 | ColumnzxAnSecSvcSlot | not-accessible | current | This object indicates the slot number. |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1.4 | ColumnzxAnSecSvcPort | not-accessible | current | This object indicates the physical port number. |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1.5 | ColumnzxAnSecSvcOnu | not-accessible | current | When zxAnSecSvcCircuitType are 'onu' or 'gemportOrLlid' or 'servicePort' this object indicates 'onu ID'. When zxAnSecSvcCircuitType are 'physicalPort' or 'brid… |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1.6 | ColumnzxAnSecSvcCircuitType | not-accessible | current | This object indicates the type of port. |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1.7 | ColumnzxAnSecSvcLogicalId | not-accessible | current | This value is an oid which indicats the logical index. When zxAnSecSvcCircuitType is 'physicalPort' its value is '0'. When zxAnSecSvcCircuitType is 'bridgePort… |
| 1.3.6.1.4.1.3902.1015.11.1.7.2.1.8 | ColumnzxAnIpSrcGuardIfEnable | read-write | current | This object indicates whether IP Source Guard is enabled at this interface.If this object is set to 'true', IP Source Guard is enabled. Traffic coming to this … |
| 1.3.6.1.4.1.3902.1015.11.1.7.3 | TablezxAnSecSvcIfSrcGuardAddrTable | not-accessible | current | A table provides the information on IP addresses used for IP Source Guard purpose at each interface capable of this feature. |
| 1.3.6.1.4.1.3902.1015.11.1.7.3.1 | RowzxAnSecSvcIfSrcGuardAddrEntry | not-accessible | current | A row instance contains the IP address type and IP address used for IP Source Guard purpose at each interface capable of this feature. |
| 1.3.6.1.4.1.3902.1015.11.1.7.3.1.1 | ColumnzxAnSecSvcIfSrcGuardClntBindType | not-accessible | current | This object indicates bind type of client ip address. If this value is 'static' zxAnSecSvcIfSrcGuardPfxLen and zxAnSecSvcIfSrcGuardVlan are optional property. |
| 1.3.6.1.4.1.3902.1015.11.1.7.3.1.2 | ColumnzxAnSecSvcIfSrcGuardIpAddrType | not-accessible | current | This object indicates the type of IP address denoted in zxAnSecSvcIfSrcGuardIpAddress object. |
| 1.3.6.1.4.1.3902.1015.11.1.7.3.1.3 | ColumnzxAnSecSvcIfSrcGuardIpAddress | not-accessible | current | This object indicates the IP address obtained at this interface through DHCP Snooping or static configuration. |
| 1.3.6.1.4.1.3902.1015.11.1.7.3.1.4 | ColumnzxAnSecSvcIfSrcGuardPfxLen | read-create | current | This object indicates the IPv6 address mask obtained at this interface through DHCP Snooping or static configuration. This object is an optional property,only … |
| 1.3.6.1.4.1.3902.1015.11.1.7.3.1.5 | ColumnzxAnSecSvcIfSrcGuardMacAddr | read-create | current | This object indicates the MAC address obtained at this interface through DHCP Snooping or static configuration. |
| 1.3.6.1.4.1.3902.1015.11.1.7.3.1.6 | ColumnzxAnSecSvcIfSrcGuardVlan | read-create | current | This object indicates the vlan obtained at this interface through DHCP Snooping or static configuration. If this object is invalid the value will be '0'. |
| 1.3.6.1.4.1.3902.1015.11.1.7.3.1.20 | ColumnzxAnSecSvcIfSrcGuardRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.3902.1015.11.1.8 | NodezxAnSecSvcReservedMac | |||
| 1.3.6.1.4.1.3902.1015.11.1.8.1 | TablezxAnSecSvcIfRsvdMacTable | not-accessible | current | The table includes the reserved MAC address. L2 packets will be forworded by the policy of this table first. The note:the NE need to support get-next to the sl… |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1 | RowzxAnSecSvcIfRsvdMacEntry | not-accessible | current | An entry in zxAnSecSvcIfRsvdMacTable. |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.1 | ColumnzxAnSecSvcIfRsvdMacRack | not-accessible | current | Rack number of the port. |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.2 | ColumnzxAnSecSvcIfRsvdMacShelf | not-accessible | current | Shelf number of the port. |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.3 | ColumnzxAnSecSvcIfRsvdMacSlot | not-accessible | current | Slot number of the port. |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.4 | ColumnzxAnSecSvcIfRsvdMacPort | not-accessible | current | The port number. |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.5 | ColumnzxAnSecSvcIfRsvdMacNumber | not-accessible | current | MAC address number. |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.6 | ColumnzxAnSecSvcIfRsvdMacStartAddr | read-create | current | Start MAC address. |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.7 | ColumnzxAnSecSvcIfRsvdMacEndAddr | read-create | current | End MAC address. |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.8 | ColumnzxAnSecSvcIfRsvdMacForwardPolicy | read-create | current | This object indicates the forwarding policy of L2 packets, its values are as follow: discard (1) - discard this packet; transparent (2) - this packet is transm… |
| 1.3.6.1.4.1.3902.1015.11.1.8.1.1.30 | ColumnzxAnSecSvcIfRsvdMacRowStatus | read-create | current | RowStatus of this table. |
| 1.3.6.1.4.1.3902.1015.11.1.8.2 | TablezxAnSecSvcRsvdMacTable | not-accessible | current | The table includes the reserved MAC address. L2 packets will be forworded by the policy of this table first. |
| 1.3.6.1.4.1.3902.1015.11.1.8.2.1 | RowzxAnSecSvcRsvdMacEntry | not-accessible | current | An entry in zxAnSecSvcRsvdMacTable. |
| 1.3.6.1.4.1.3902.1015.11.1.8.2.1.1 | ColumnzxAnSecSvcRsvdMacNumber | not-accessible | current | MAC address number. |
| 1.3.6.1.4.1.3902.1015.11.1.8.2.1.2 | ColumnzxAnSecSvcRsvdMacStartAddr | read-create | current | Starting MAC address. |
| 1.3.6.1.4.1.3902.1015.11.1.8.2.1.3 | ColumnzxAnSecSvcRsvdMacEndAddr | read-create | current | Ending MAC address. |
| 1.3.6.1.4.1.3902.1015.11.1.8.2.1.4 | ColumnzxAnSecSvcRsvdMacForwardPolicy | read-create | current | This object indicates the forwarding policy of L2 packets, its values are as follow: discard (1) - discard this packet; transparent (2) - this packet is transm… |
| 1.3.6.1.4.1.3902.1015.11.1.8.2.1.30 | ColumnzxAnSecSvcRsvdMacRowStatus | read-create | current | RowStatus of this table. |
| 1.3.6.1.4.1.3902.1015.11.1.9 | NodezxAnSecSvcL2cp | |||
| 1.3.6.1.4.1.3902.1015.11.1.9.1 | NodezxAnSecSvcL2cpGlobal | |||
| 1.3.6.1.4.1.3902.1015.11.1.9.1.1 | ScalarzxAnSecSvcL2cpVlanConfNextId | read-only | current | This object contains an unused value for zxAnSecSvcL2cpVlanConfId in the zxAnSecSvcL2cpVlanConfTable,or 0 to indicate that none exist. |
| 1.3.6.1.4.1.3902.1015.11.1.9.2 | TablezxAnSecSvcL2cpVlanConfTable | not-accessible | current | This table includes the L2CP records for forwarding or discarding. |
| 1.3.6.1.4.1.3902.1015.11.1.9.2.1 | RowzxAnSecSvcL2cpVlanConfEntry | not-accessible | current | An entry in zxAnSecSvcL2cpVlanConfTable. |
| 1.3.6.1.4.1.3902.1015.11.1.9.2.1.1 | ColumnzxAnSecSvcL2cpVlanConfId | not-accessible | current | This object indicates the L2CP records ID. |
| 1.3.6.1.4.1.3902.1015.11.1.9.2.1.2 | ColumnzxAnSecSvcL2cpVlanConfDestMac | read-create | current | This object indicates the packet destination MAC address of the L2CP record. |
| 1.3.6.1.4.1.3902.1015.11.1.9.2.1.3 | ColumnzxAnSecSvcL2cpVlanConfMacMask | read-create | current | This is the wildcard mask for the zxAnSecSvcL2cpVlanConfDestMac bits that must match. 1 bits in the mask indicate the corresponding bits in the zxAnSecSvcL2cpV… |
| 1.3.6.1.4.1.3902.1015.11.1.9.2.1.4 | ColumnzxAnSecSvcL2cpVlanConfVid | read-create | current | This object indicates the VLAN value of the packet. |
| 1.3.6.1.4.1.3902.1015.11.1.9.2.1.5 | ColumnzxAnSecSvcL2cpVlanConfVlanMask | read-create | current | This is the wildcard mask for the zxAnSecSvcL2cpVlanConfVid bits that must match. 1 bits in the mask indicate the corresponding bits in the zxAnSecSvcL2cpVlanC… |
| 1.3.6.1.4.1.3902.1015.11.1.9.2.1.6 | ColumnzxAnSecSvcL2cpVlanConfFwdPolicy | read-create | current | This object indicates the forwarding policy of L2 packets, its values are as follow: discard (1) - discard this packet; forward (2) - the packet is transmitted… |
| 1.3.6.1.4.1.3902.1015.11.1.9.2.1.50 | ColumnzxAnSecSvcL2cpVlanConfRowStatus | read-create | current | RowStatus of the zxAnSecSvcL2cpVlanConfTable table. |
| 1.3.6.1.4.1.3902.1015.11.1.9.3 | TablezxAnSecSvcL2cpDefaultTable | not-accessible | current | This table includes the default L2CP records. |
| 1.3.6.1.4.1.3902.1015.11.1.9.3.1 | RowzxAnSecSvcL2cpDefaultEntry | not-accessible | current | An entry in zxAnSecSvcL2cpDefaultTable. |
| 1.3.6.1.4.1.3902.1015.11.1.9.3.1.1 | ColumnzxAnSecSvcL2cpDefaultId | not-accessible | current | This object indicates the default L2CP records ID. |
| 1.3.6.1.4.1.3902.1015.11.1.9.3.1.2 | ColumnzxAnSecSvcL2cpDefaultDestMac | read-only | current | This object indicates the packet destination MAC address of the default L2CP record. |
| 1.3.6.1.4.1.3902.1015.11.1.9.3.1.3 | ColumnzxAnSecSvcL2cpDefaultMacMask | read-only | current | This is the wildcard mask for the zxAnSecSvcL2cpDefaultDestMac bits that must match. 1 bits in the mask indicate the corresponding bits in the zxAnAclHybridRul… |
| 1.3.6.1.4.1.3902.1015.11.1.9.3.1.6 | ColumnzxAnSecSvcL2cpDefaultFwdPolicy | read-only | current | This object indicates the forwarding policy of L2 packets, its values are as follow: discard (1) - discard this packet; forward (2) - the packet is transmitted… |
| 1.3.6.1.4.1.3902.1015.11.1.10 | NodezxAnSecSvcIpv6Filter | |||
| 1.3.6.1.4.1.3902.1015.11.1.10.1 | NodezxAnSecSvcIpv6FiltGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.11.1.10.1.1 | ScalarzxAnIpv6FiltVlanConfNextId | read-only | current | This object contains an unused value for zxAnIpv6FiltVlanConfId in the zxAnSecSvcIpv6FiltVlanConfTable. The value 0 indicates that no unassigned entries are av… |
| 1.3.6.1.4.1.3902.1015.11.1.10.2 | TablezxAnSecSvcIpv6FiltVlanConfTable | not-accessible | current | This table includes the IPv6 filter records. |
| 1.3.6.1.4.1.3902.1015.11.1.10.2.1 | RowzxAnSecSvcIpv6FiltVlanConfEntry | not-accessible | current | An entry in zxAnSecSvcIpv6FiltVlanConfTable. |
| 1.3.6.1.4.1.3902.1015.11.1.10.2.1.1 | ColumnzxAnIpv6FiltVlanConfId | not-accessible | current | This object indicates the IPv6 filter records ID. |
| 1.3.6.1.4.1.3902.1015.11.1.10.2.1.2 | ColumnzxAnIpv6FiltVlanConfVid | read-create | current | This object indicates the VLAN value of the packet. |
| 1.3.6.1.4.1.3902.1015.11.1.10.2.1.3 | ColumnzxAnIpv6FiltVlanConfVlanMask | read-create | current | This is the wildcard mask for the zxAnIpv6FiltVlanConfVid bits that must match. 1 bits in the mask indicate the corresponding bits in the zxAnIpv6FiltVlanConfV… |
| 1.3.6.1.4.1.3902.1015.11.1.10.2.1.50 | ColumnzxAnIpv6FiltVlanConfRowStatus | read-create | current | RowStatus of the zxAnSecSvcIpv6FiltVlanConfTable table. |
| 1.3.6.1.4.1.3902.1015.11.2 | NodezxAnSecSvcTrapObjects | |||
| 1.3.6.1.4.1.3902.1015.11.2.1 | NotificationzxAnSecSvcAntiDosFault | current | It indicate current packets per second over zxAnSecSvcAntiDosAscThreshold, The source MAC of packet will put into blacklist.The variable ifIndex indicate trap … | |
| 1.3.6.1.4.1.3902.1015.11.2.2 | NotificationzxAnSecSvcAntiDosFaultCleared | current | It indicate current packets per second below zxAnSecSvcAntiDosDescThreshold, The source MAC of packet will remove from blacklist.The variable ifIndex indicate … | |
| 1.3.6.1.4.1.3902.1015.11.2.3 | NotificationzxAnIfMacAntiDriftNotify | current | If both zxAnMasEnable and zxAnMasMacMoveReportEnable is enable, zxAnIfMacAntiDriftNotify is generated when a MAC address is drifted between two interfaces. |