ZTE-AN-SERVICEPORT
34 objects
This MIB defines managed objects of zte service port.
Imported Objects
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| ZTE-AN-TC-MIB | zxAn ZxAnIfindex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.8 | IdentityzxAnServicePort | This MIB defines managed objects of zte service port. | ||
| 1.3.6.1.4.1.3902.1015.8.1 | NodezxAnServicePortObjects | |||
| 1.3.6.1.4.1.3902.1015.8.1.1 | TablezxAnServicePortConfTable | not-accessible | current | This table includes interface service port configuration.it uses in user's traffic scene, a service port indicates an user's sercice, for example VOIP/CATV/POT… |
| 1.3.6.1.4.1.3902.1015.8.1.1.1 | RowzxAnServicePortConfEntry | not-accessible | current | An entry in zxAnServicePortConfTable. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.1 | ColumnzxAnBridgePortIndex | not-accessible | current | An index for a bridge port. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.2 | ColumnzxAnServicePortID | not-accessible | current | An index for a service port under a bridge port,index value from 1 to 8 |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.3 | ColumnzxAnServicePortDesc | read-create | current | A service port describe string. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.4 | ColumnzxAnServicePortServiceMode | read-create | current | A traffic type for a service port. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.5 | ColumnzxAnUserInVid | read-create | current | User inner vlan,'0' indicates untag. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.6 | ColumnzxAnUserInPriority | read-create | current | User priority,from 0 to 7. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.7 | ColumnzxAnUserEthType | read-create | current | User Ether type, '1' indicates no config, '2' indicates pppoe, '3' indicates ipoe,user define uses hex. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.8 | ColumnzxAnUserEthFilter | read-create | current | this object indicates if filtered by ether protocol. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.9 | ColumnzxAnUserOutCVid | read-create | current | User outer cvlan,'0' indicates no config. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.10 | ColumnzxAnUserOutSVid | read-create | current | User outer svlan,'0' indicates no config. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.11 | ColumnzxAnUserTlsVlan | read-create | current | TLS VLAN,when zxAnServicePortServiceMode equal 'tls' then '0' indicates untag, when zxAnServicePortServiceMode unequal to 'tls' then '0' indicates no config |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.12 | ColumnzxAnUserSVidCos | read-create | current | |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.13 | ColumnzxAnVlanTransMode | read-create | current | |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.14 | ColumnzxAnUserInStartVid | read-create | current | User inner start vlan,'0' indicates untag. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.15 | ColumnzxAnUserInEndVid | read-create | current | User inner end vlan,'0' indicates untag. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.16 | ColumnzxAnUserCVidCos | read-create | current | This object indicates user egress CVLAN CoS.'0xFF' indicates no config. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.17 | ColumnzxAnUserInSVid | read-create | current | User inner svlan,'0' indicates no config. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.18 | ColumnzxAnSrvPortVlanXconnectEnable | read-create | current | Enabling service port VLAN Xconnect means that zxAnUserOutSVid will be forwarded without learning MAC address and configuring VLAN Xconnect. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.19 | ColumnzxAnServicePortUserDscp | read-create | current | User-side DSCP. When zxAnServicePortServiceMode is tagAndDscp(15), map zxAnServicePortUserDscp to zxAnUserSVidCos, translate zxAnUserInVid to zxAnUserOutCVid a… |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.20 | ColumnzxAnServicePortIngressTrafficPrf | read-create | current | Ingress traffic profile. The zero length means not-configured. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.21 | ColumnzxAnServicePortEgressTrafficPrf | read-create | current | Egress traffic profile. The zero length means not-configured. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.22 | ColumnzxAnServicePortAdminStatus | read-create | current | Administrative status of service port. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.23 | ColumnzxAnServicePortQueueId | read-create | current | Service port queue ID. Value 0xFF means not config. |
| 1.3.6.1.4.1.3902.1015.8.1.1.1.100 | ColumnzxAnServicePortRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.3902.1015.8.1.2 | TablezxAnUserSceneTable | not-accessible | current | This table indicates user traffic scene,includes multi-user-access scene and aggregation scene. |
| 1.3.6.1.4.1.3902.1015.8.1.2.1 | RowzxAnUserSceneEntry | not-accessible | current | An entry in zxAnUserSceneTable. |
| 1.3.6.1.4.1.3902.1015.8.1.2.1.1 | ColumnzxAnCpeIndex | not-accessible | current | An index for a CPE,for example EPON/GPON ONU. |
| 1.3.6.1.4.1.3902.1015.8.1.2.1.2 | ColumnzxAnSceneMode | read-only | current | A traffic secen mode. |
| 1.3.6.1.4.1.3902.1015.8.1.50 | NodezxAnServicePortGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.8.1.50.1 | ScalarzxAnServicePortCompatible | read-only | current | The service port compatibility. The bit value 1 means the function represented by this bit is supported by this equipment. vlanXconnectEnable(0): value 1 means… |