ZTE-AN-SYS-MIB
272 objects
This MIB defines managed objects of zte system mgmt.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| ZTE-AN-TC-MIB | zxAn ZxAnIfindex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1 | IdentityzxAnSysMib | This MIB defines managed objects of zte system mgmt. | ||
| 1.3.6.1.4.1.3902.1015.1.1 | NodezxAnSysObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.2 | ScalarzxAnSnmpSetCmdErrCode | read-only | current | Error code for SNMP set command.When agent excutes a snmp set, this variable should be maintained.Value 0 means success. |
| 1.3.6.1.4.1.3902.1015.1.1.3 | NodezxAnSysSecMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.3.1 | ScalarzxAnCliCrftTerminalEnable | read-write | current | Enable/disable craft terminal interface. NOTE: It is ONLY used to RS-232 serial command interface and out-band CLI,DON'T apply it to in-band telnet command int… |
| 1.3.6.1.4.1.3902.1015.1.1.3.2 | ScalarzxAnCliSecurityLevel | read-write | current | Security level of CLI. |
| 1.3.6.1.4.1.3902.1015.1.1.3.3 | ScalarzxAnCliCrftTerminalLoginStatus | read-only | current | The using status of the craft terminal interface. |
| 1.3.6.1.4.1.3902.1015.1.1.3.4 | ScalarzxAnCliCrftTerminalLastLoginType | read-only | current | The type of the craft terminal interface lastest logon. |
| 1.3.6.1.4.1.3902.1015.1.1.3.5 | ScalarzxAnCliPromptName | read-write | current | The prompt name of CLI. |
| 1.3.6.1.4.1.3902.1015.1.1.3.6 | ScalarzxAnCliSuperUserName | read-only | current | The super user name of CLI. |
| 1.3.6.1.4.1.3902.1015.1.1.3.7 | ScalarzxAnCliSuperUserPwd | read-only | current | The super user password of CLI. |
| 1.3.6.1.4.1.3902.1015.1.1.3.8 | ScalarzxAnCliTelnetEnable | read-write | current | Enable or disable in-band and out-band Telnet. |
| 1.3.6.1.4.1.3902.1015.1.1.3.9 | ScalarzxAnCliUserSuspendMode | read-write | current | CLI user suspending mode. notSuspend(1) byIp(2) byUserName(3) byIpOrUserName(4) |
| 1.3.6.1.4.1.3902.1015.1.1.3.10 | ScalarzxAnCliUserSuspendDuration | read-write | current | CLI user suspending time. |
| 1.3.6.1.4.1.3902.1015.1.1.3.11 | ScalarzxAnCliUserPasswordRetries | read-write | current | CLI user password retry times. |
| 1.3.6.1.4.1.3902.1015.1.1.3.12 | ScalarzxAnCliTryToLoginUserName | accessible-for-notify | current | The try to login user name. |
| 1.3.6.1.4.1.3902.1015.1.1.3.13 | ScalarzxAnCliTryToLoginUserLocation | accessible-for-notify | current | If the user's type is console,the object's value is empty string. If the user's type is telnet, the object's value is the try to login IP address. |
| 1.3.6.1.4.1.3902.1015.1.1.3.14 | ScalarzxAnCliMultiSessionsInformEnable | read-write | current | This object indicates whether the information is informed to other active sessions when login failed. |
| 1.3.6.1.4.1.3902.1015.1.1.3.47 | NodezxAnSysSshObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.3.47.1 | NodezxAnSysSshGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.3.47.1.2 | ScalarzxAnSysSshEnable | read-write | current | Enable or disable the SSH service. |
| 1.3.6.1.4.1.3902.1015.1.1.3.47.1.3 | ScalarzxAnSysSshVersion | read-write | current | SSH version. |
| 1.3.6.1.4.1.3902.1015.1.1.3.47.1.4 | ScalarzxAnSysSshOnlyEnable | read-write | current | Only SSH server activated, more details are given as following: The value enabled(1) indicates the device is only accessible via SSH. The value disabled(2) ind… |
| 1.3.6.1.4.1.3902.1015.1.1.3.47.1.5 | ScalarzxAnSysSshGenerateKeyEnable | read-write | current | Generate SSH key only in case of SSH version 1 selected. |
| 1.3.6.1.4.1.3902.1015.1.1.3.47.1.6 | ScalarzxAnSysSshAuthType | read-write | current | SSH authentication type. |
| 1.3.6.1.4.1.3902.1015.1.1.3.48 | NodezxAnSysWriteLockObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.3.48.1 | ScalarzxAnSysWriteLockOwner | read-only | current | The write lock owner. |
| 1.3.6.1.4.1.3902.1015.1.1.3.48.2 | ScalarzxAnSysWriteLockAction | read-write | current | Lock or unlock the write right. When it is set to lock(1),only SNMP manager has write lock. |
| 1.3.6.1.4.1.3902.1015.1.1.3.49 | TablezxAnSysCliUserTable | not-accessible | current | A table contain user information for web and console and telnet. |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1 | RowzxAnSysCliUserEntry | not-accessible | current | A list of user information. |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.1 | ColumnzxAnCliUserConfIndex | not-accessible | current | A simple index . |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.2 | ColumnzxAnCliUserConfName | read-create | current | The telnet or console user name. |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.3 | ColumnzxAnCliUserConfPwd | read-create | current | The telnet or console user password. |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.4 | ColumnzxAnCliUserConfAccessLevel | read-create | current | The user access level. 0-4: Common user. 5-9: Operator. 10-14: Administrator. 15: Supervisor. |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.5 | ColumnzxAnCliUserConfRowStatus | read-create | current | The user state in this row. |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.6 | ColumnzxAnCliUserConfPwdEncryptEnable | read-create | current | This MIB is defined for password mode |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.7 | ColumnzxAnCliUserConfMaxSessions | read-create | current | CLI user maximum login sessions |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.8 | ColumnzxAnCliUserConfAdminStatus | read-create | current | This MIB is set CLI user status |
| 1.3.6.1.4.1.3902.1015.1.1.3.49.1.9 | ColumnzxAnCliUserConfOperStatus | read-only | current | CLI user operational status. |
| 1.3.6.1.4.1.3902.1015.1.1.3.50 | TablezxAnSysMgmtAclTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.50.1 | RowzxAnSysMgmtAclEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.50.1.1 | ColumnzxAnSysMgmtAclIndex | not-accessible | current | The index of a management ACL. |
| 1.3.6.1.4.1.3902.1015.1.1.3.50.1.2 | ColumnzxAnSysMgmtAclAlias | read-create | current | The alias of a management ACL. |
| 1.3.6.1.4.1.3902.1015.1.1.3.50.1.30 | ColumnzxAnSysMgmtAclRowStatus | read-create | current | This entry's row status. |
| 1.3.6.1.4.1.3902.1015.1.1.3.51 | TablezxAnSysMgmtAclRuleTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.51.1 | RowzxAnSysMgmtAclRuleEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.51.1.1 | ColumnzxAnSysMgmtAclRuleID | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.51.1.2 | ColumnzxAnSysMgmtAclRuleAccessCtrl | read-create | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.51.1.3 | ColumnzxAnSysMgmtAclRuleSrcAddrType | read-create | current | Source address type. |
| 1.3.6.1.4.1.3902.1015.1.1.3.51.1.4 | ColumnzxAnSysMgmtAclRuleSrcAddr | read-create | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.51.1.5 | ColumnzxAnSysMngAclRuleSrcAddrWildcard | read-create | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.51.1.50 | ColumnzxAnSysMgmtAclRuleRowStatus | read-create | current | This entry's row status. |
| 1.3.6.1.4.1.3902.1015.1.1.3.52 | TablezxAnSysMgmtAclBindTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.52.1 | RowzxAnSysMgmtAclBindEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1015.1.1.3.52.1.1 | ColumnzxAnSysMgmtAclProtocol | not-accessible | current | Protocol type. |
| 1.3.6.1.4.1.3902.1015.1.1.3.52.1.2 | ColumnzxAnSysMgmtAclBindIndex | read-create | current | Index of management ACL bind to this protocol. |
| 1.3.6.1.4.1.3902.1015.1.1.3.53 | TablezxAnSysCliActiveUsersTable | not-accessible | current | CLI active user table. |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1 | RowzxAnSysCliActiveUsersEntry | not-accessible | current | An entry of zxAnSysCliActiveUsersTable. |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1.1 | ColumnzxAnCliActiveUserIndex | not-accessible | current | A simple index . |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1.2 | ColumnzxAnCliActiveUserType | read-only | current | Current CLI Active User Type. |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1.3 | ColumnzxAnCliActiveUserName | read-only | current | Current CLI active user name. |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1.4 | ColumnzxAnCliActiveUserPriority | read-only | current | Current CLI active user priority. 0-4: Common user. 5-9: Operator. 10-14: Administrator. 15: Supervisor. |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1.5 | ColumnzxAnCliActiveUserHost | read-only | current | Current CLI active user host. |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1.6 | ColumnzxAnCliActiveUserIdleTime | read-only | current | Current CLI active user idel time, it's format like: HH:MM:SS |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1.7 | ColumnzxAnCliActiveUserLocation | read-only | current | Current CLI active user location. |
| 1.3.6.1.4.1.3902.1015.1.1.3.53.1.31 | ColumnzxAnSysCliActiveUserRowStatus | read-create | current | This entry's row status. |
| 1.3.6.1.4.1.3902.1015.1.1.3.54 | TablezxAnSysCommunityConfTable | not-accessible | current | A table of SNMPv1/v2c community string configuration. |
| 1.3.6.1.4.1.3902.1015.1.1.3.54.1 | RowzxAnSysCommunityConfEntry | not-accessible | current | A list of community strings. |
| 1.3.6.1.4.1.3902.1015.1.1.3.54.1.1 | ColumnzxAnSysCommunityConfCommunity | not-accessible | current | DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Name must begin with alphabetic character or '_' and '@' shouldn't be used in community stri… |
| 1.3.6.1.4.1.3902.1015.1.1.3.54.1.2 | ColumnzxAnSysCommunityConfPermission | read-create | current | DURABLE: { readWrite:all } This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite… |
| 1.3.6.1.4.1.3902.1015.1.1.3.54.1.3 | ColumnzxAnSysCommunityConfViewName | read-create | current | This object is reserved now. DURABLE: { 'internet':all } At runtime (i.e., not when this object is SET), this view name is compared to the 'vacmViewTreeFamilyV… |
| 1.3.6.1.4.1.3902.1015.1.1.3.54.1.15 | ColumnzxAnSysCommunityConfRowStatus | read-create | current | DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - su… |
| 1.3.6.1.4.1.3902.1015.1.1.4 | NodezxAnSysDataMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.4.1 | ScalarzxAnSysConfigSavingAction | read-write | current | Save device configuration data to flash media.The file saving configuration is startup.dat. |
| 1.3.6.1.4.1.3902.1015.1.1.4.2 | ScalarzxAnSysConfigSaveStatus | read-only | current | The status of save flash operation. |
| 1.3.6.1.4.1.3902.1015.1.1.4.3 | ScalarzxAnSysAutoSaveFlashMode | read-write | current | Automatic save flash mode. |
| 1.3.6.1.4.1.3902.1015.1.1.4.4 | ScalarzxAnSysDailyAutoSaveFlashTime | read-write | current | The time to auto save flash every day. for example:HH:MM:SS.(02:22:33). This variable is valid if zxAnSysAutoSaveFlashMode set to everyday(2). |
| 1.3.6.1.4.1.3902.1015.1.1.4.5 | ScalarzxAnSysAutoSaveFlashStartDate | read-write | current | The start datetime to auto save flash. for example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33). This variable is valid if zxAnSysAutoSaveFlashMode set to interva… |
| 1.3.6.1.4.1.3902.1015.1.1.4.6 | ScalarzxAnSysAutoSaveFlashInterval | read-write | current | The Interval of auto save flash. This variable is valid if zxAnSysAutoSaveFlashMode set to interval(3). value 0 meas save once only at zxAnSysAutoSaveFlashStar… |
| 1.3.6.1.4.1.3902.1015.1.1.4.7 | ScalarzxAnSysConfigSaveProgress | read-only | current | The progress of save flash. |
| 1.3.6.1.4.1.3902.1015.1.1.4.8 | ScalarzxAnSysDataSaveFlashFailReason | read-only | current | The reason of saving flash operation failed. Possible values are: noError(1) - No error, saving flash successfully or no saving flash operation. flashMediaFull… |
| 1.3.6.1.4.1.3902.1015.1.1.4.9 | ScalarzxAnSysCfgChangeSaveFlashEnable | read-write | current | Enables or disables automatic save flash when configuration is changed. |
| 1.3.6.1.4.1.3902.1015.1.1.4.10 | ScalarzxAnSysCfgChangeSaveHoldOffTime | read-write | current | The hold off time of automatic save flash when configuration is changed. |
| 1.3.6.1.4.1.3902.1015.1.1.5 | NodezxAnSysRunningCtrl | |||
| 1.3.6.1.4.1.3902.1015.1.1.5.1 | ScalarzxAnChassisSysReboot | read-write | current | Reboot system. |
| 1.3.6.1.4.1.3902.1015.1.1.5.2 | ScalarzxAnSysRevision | read-only | current | Module revision flag. |
| 1.3.6.1.4.1.3902.1015.1.1.5.3 | ScalarzxAnFileLoadDefaultConfiguration | read-write | current | Use this parameter to load settings. |
| 1.3.6.1.4.1.3902.1015.1.1.5.4 | ScalarzxAnSysLastRebootReason | read-only | current | It indicates device coldstart reason |
| 1.3.6.1.4.1.3902.1015.1.1.5.5 | ScalarzxAnSysResourceType | read-only | current | System resource type. |
| 1.3.6.1.4.1.3902.1015.1.1.100 | NodezxAnSysNmsMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.100.1 | NodezxAnSysNmsMgmtPath | |||
| 1.3.6.1.4.1.3902.1015.1.1.100.1.1 | ScalarzxAnSysNmsMgmtOutbandIpAddr | read-write | current | Outband IpAddr for NMS management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.2 | ScalarzxAnSysNmsMgmtOutbandIpMask | read-write | current | Outband Ip subnetwork mask for NMS management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.3 | ScalarzxAnSysNmsMgmtOutbandMac | read-only | current | Outband MAC for NMS management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.4 | ScalarzxAnSysNmsMgmtInbandIpAddr | read-write | current | Inband IpAddr for NMS management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.5 | ScalarzxAnSysNmsMgmtInbandIpMask | read-write | current | Inband Ip subnetwork mask for NMS management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.6 | ScalarzxAnSysNmsMgmtInbandMac | read-only | current | Inband MAC for NMS management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.7 | ScalarzxAnSysNmsMgmtInbandVlan | read-write | current | Inband VLAN for NMS management. The VLAN must exist when this Variable is set. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.8 | ScalarzxAnSysNmsMgmtInbandVpnId | read-write | current | Inband VPN ID for NMS management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.9 | ScalarzxAnSysMgmtOutbandIpv6Addr | read-write | current | Outband inet address. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.10 | ScalarzxAnSysMgmtOutbandIpv6AddrPfxLen | read-write | current | Outband inet address prefix length. |
| 1.3.6.1.4.1.3902.1015.1.1.100.1.11 | ScalarzxAnSysNmsMgmtInbandEnable | read-write | current | Enables or disables inband management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.2 | NodezxAnSysServiceMgmtPath | |||
| 1.3.6.1.4.1.3902.1015.1.1.100.2.1 | TablezxAnSysServiceMgmtIpTable | not-accessible | current | This table includes the ip group for services management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.2.1.1 | RowzxAnSysServiceMgmtIpEntry | not-accessible | current | An entry in zxAnSysServiceMgmtIpTable.When this entry will be configured, zxAnSysServiceMgmtVpnId,zxAnSysServiceMgmtIpAddr and zxAnSysServiceMgmtIpMask must be… |
| 1.3.6.1.4.1.3902.1015.1.1.100.2.1.1.1 | ColumnzxAnSysServiceMgmtVlanId | not-accessible | current | VLAN for services management. The VLAN must exist when this Variable is set. |
| 1.3.6.1.4.1.3902.1015.1.1.100.2.1.1.2 | ColumnzxAnSysServiceMgmtVpnId | read-create | current | VPN ID for services management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.2.1.1.3 | ColumnzxAnSysServiceMgmtIpAddr | read-create | current | IpAddr for services management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.2.1.1.4 | ColumnzxAnSysServiceMgmtIpMask | read-create | current | Ip subnetwork mask for services management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.2.1.1.5 | ColumnzxAnSysServiceMgmtMac | read-only | current | MAC for services management. |
| 1.3.6.1.4.1.3902.1015.1.1.100.2.1.1.6 | ColumnzxAnSysServiceMgmtIpRowStatus | read-create | current | Rowstatus to create or delete a row of this entry. |
| 1.3.6.1.4.1.3902.1015.1.1.101 | NodezxAnSysTimeMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.101.1 | ScalarzxAnRtcSysDateTime | read-write | current | This MIB defines ne time.for example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33). |
| 1.3.6.1.4.1.3902.1015.1.1.101.2 | ScalarzxAnRtcZoneType | read-write | current | zone type. |
| 1.3.6.1.4.1.3902.1015.1.1.101.3 | ScalarzxAnRtcZoneHours | read-write | current | zxAnRtcZoneType east /west: 1-12 no use for zxAnRtcZoneType zero. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4 | NodezxAnSysNtpMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.101.4.1 | ScalarzxAnSysNtpEnable | read-write | current | Enable/disable NTP in this system. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.2 | ScalarzxAnSysNtpServerAddr | read-write | current | the NTP server's IP address |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.3 | ScalarzxAnSysNtpClientAddr | read-write | current | the NTP client IP address which is a ip of this agent. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.4 | ScalarzxAnSysNtpProtoVersion | read-write | current | the NTP server's protocol version. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.5 | ScalarzxAnSysNtpPollInterval | read-write | current | the NTP server's fetch time's interval time |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.6 | ScalarzxAnSysNtpStatusCurrentState | read-only | current | The current state of the NTP. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.7 | ScalarzxAnSysNtpStratum | read-only | current | the local NTP server 's stratum |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.8 | ScalarzxAnSysNtpCurrentOffset | read-only | current | The Time offset to the current selected reference time source. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.9 | ScalarzxAnSysNtpOffsetAlarmThreshold | read-write | current | The alarm threshold of NTP time offset to the current selected reference time source.When this threshold is across,the trap zxAnSysNtpOffsetOverThreshTrap shou… |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.10 | ScalarzxAnSysNtpMode | read-only | current | The NTP mode. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.11 | ScalarzxAnSysNtpCurrServerIpAddrType | read-only | current | IP address type of the current synchronizing NTP server. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.12 | ScalarzxAnSysNtpCurrServerIpAddress | read-only | current | IP address of the current synchronizing NTP server. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.13 | ScalarzxAnSysNtpCurrServerVrf | read-only | current | The VRF name of the current synchronizing NTP server. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.14 | ScalarzxAnSysNtpClientAddrType | read-write | current | NTP client IP address type. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.15 | ScalarzxAnSysNtpClientAddrIpv6 | read-write | current | NTP client IP address for IPv6. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.16 | ScalarzxAnSysNtpAuthenticationEnable | read-write | current | Enables or disables NTP authentication. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51 | TablezxAnSysNtpServerTable | not-accessible | current | NTP server configuration table. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1 | RowzxAnSysNtpServerEntry | not-accessible | current | NTP server configuration entry. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1.1 | ColumnzxAnSysNtpServerPriority | not-accessible | current | Priority of the NTP server.The min number with high priority |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1.2 | ColumnzxAnSysNtpServerVrf | read-create | current | VRF name of the NTP server. NE returns empty string when it's unconfigured. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1.3 | ColumnzxAnSysNtpServerIpAddressType | read-create | current | IP address type of the NTP server. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1.4 | ColumnzxAnSysNtpServerIpAddress | read-create | current | IP address of the NTP server. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1.5 | ColumnzxAnSysNtpServerVersion | read-create | current | Version number of the NTP. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1.6 | ColumnzxAnSysNtpServerAuthKeyId | read-create | current | Authentication key ID of the NTP server. Value 0 means unconfigured. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1.7 | ColumnzxAnSysNtpServerLock | read-create | current | Lock or unlock the NTP server. Only one server can be locked. If one server is locked,the locked server can be used to synchronize time. If no server is locked… |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.51.1.30 | ColumnzxAnSysNtpServerRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.52 | TablezxAnSysNtpAuthenticationTable | not-accessible | current | NTP authentication configuration table. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.52.1 | RowzxAnSysNtpAuthenticationEntry | not-accessible | current | NTP authentication configuration entry. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.52.1.1 | ColumnzxAnSysNtpAuthenticationKeyId | not-accessible | current | NTP authentication key ID. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.52.1.2 | ColumnzxAnSysNtpAuthenticationKey | read-create | current | NTP authentication key. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.52.1.3 | ColumnzxAnSysNtpAuthenticationTrust | read-create | current | NTP authentication trust status. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.52.1.30 | ColumnzxAnSysNtpAuthRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.53 | TablezxAnSysNtpIfConfigTable | not-accessible | current | NTP layer 3 interface configuration table. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.53.1 | RowzxAnSysNtpIfConfigEntry | not-accessible | current | NTP layer 3 interface configuration entry. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.53.1.1 | ColumnzxAnSysNtpIfIndex | not-accessible | current | The ifindex of the NTP layer 3 interface. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.53.1.2 | ColumnzxAnSysNtpIfBroadcastClientEn | read-create | current | Enables or disables NTP broadcast client mode. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.53.1.3 | ColumnzxAnSysNtpIfMulticastClientEn | read-create | current | Enables or disables NTP multicast client mode. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.53.1.4 | ColumnzxAnSysNtpIfMulticastIpAddrType | read-create | current | Multicast IP address type. This variable is valid if zxAnSysNtpMulticastClientEnable is enable. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.53.1.5 | ColumnzxAnSysNtpIfMulticastIpAddr | read-create | current | Multicast IP address. This variable is valid if zxAnSysNtpMulticastClientEnable is enable. |
| 1.3.6.1.4.1.3902.1015.1.1.101.4.53.1.30 | ColumnzxAnSysNtpIfConfigRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1015.1.1.101.5 | ScalarzxAnRtcZoneAlias | read-write | current | Zone alias. |
| 1.3.6.1.4.1.3902.1015.1.1.101.6 | ScalarzxAnRtcZoneMinutes | read-write | current | Minutes offset in a time zone. |
| 1.3.6.1.4.1.3902.1015.1.1.101.7 | NodezxAnSysSummerTimeMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.101.7.1 | ScalarzxAnRtcSummerTimeAdminStatus | read-write | current | An indication of whether the summer time feature is enabled on this device. When this object is set to enable, then zxAnRtcSummerTimeOffset, zxAnRtcSummerTimeS… |
| 1.3.6.1.4.1.3902.1015.1.1.101.7.2 | ScalarzxAnRtcSummerTimeName | read-write | current | Summer Time name. |
| 1.3.6.1.4.1.3902.1015.1.1.101.7.3 | ScalarzxAnRtcSummerTimeType | read-write | current | If type is once,the summer time feature will work only once on this device.If type is recurring, the summer time feature will work every year on this device. |
| 1.3.6.1.4.1.3902.1015.1.1.101.7.4 | ScalarzxAnRtcSummerTimeStart | read-write | current | Indicates summer time starts at this time every year. It's format is: ww-dd-mm HH:MM:SS tokens contents range ww week 1..5,ff last = ff dd day 1..7 where sunda… |
| 1.3.6.1.4.1.3902.1015.1.1.101.7.5 | ScalarzxAnRtcSummerTimeEnd | read-write | current | Indicates summer time ends at this time every year. It's format is: ww-dd-mm HH:MM:SS tokens contents range ww week 1..5,ff last = ff dd day 1..7 where sunday … |
| 1.3.6.1.4.1.3902.1015.1.1.101.7.6 | ScalarzxAnRtcSummerTimeOffset | read-write | current | The value of this object indicates number of minutes to add or to subtract during summer time. This object is not instantiated when zxAnRtcSummerTimeAdminStatu… |
| 1.3.6.1.4.1.3902.1015.1.1.101.7.7 | ScalarzxAnRtcSummerTimeOperStatus | read-only | current | An indication of whether the summer time feature is worked on this device. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8 | NodezxAnSysPtpMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.101.8.1 | NodezxAnSysPtpGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.101.8.1.1 | ScalarzxAnSysPtpConfigClockMode | read-write | current | The PTP clock mode. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.1.2 | ScalarzxAnSysPtpConfigTsc | read-write | current | The two_steps attribution is true or not. true - A clock that provides time information using the combination of an event message and a subsequent general mess… |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.1.3 | ScalarzxAnSysPtpServiceVlan | read-write | current | The vlan ID of the precision clock synchronization service. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.1.4 | ScalarzxAnSysPtpTodTransMode | read-write | current | The transmit type of TOD. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.1.5 | ScalarzxAnSysPtpTodSignalType | read-write | current | The signal type of TOD, it's only used in the case where zxAnSysPtpTodMode is 'local'. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.2 | TablezxAnSysPtpPortTable | not-accessible | current | The PTP Port Table. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.2.1 | RowzxAnSysPtpPortEntry | not-accessible | current | The PTP Port Entry |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.2.1.1 | ColumnzxAnSysPtpPortIndex | not-accessible | current | The id of the ptp port. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.2.1.2 | ColumnzxAnSysPtpPortConfState | read-create | current | The config state of the ptp port. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.2.1.3 | ColumnzxAnSysPtpPortSyncInterval | read-create | current | The frequency of clock synchronization packets of this slave, in packets per second. The value should be 2^n, such as 1, 2, 4, 8, 16 and so on. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.2.1.4 | ColumnzxAnSysPtpPortClockDestIpAddress | read-create | current | The IP address of the clock destination. |
| 1.3.6.1.4.1.3902.1015.1.1.101.8.2.1.20 | ColumnzxAnSysPtpPortRowStatus | read-create | current | Rowstatus to create or delete a row of this entry. |
| 1.3.6.1.4.1.3902.1015.1.1.102 | NodezxAnSysSnmpOperSyslogMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.102.1 | ScalarzxAnSysSnmpOperSyslogStatus | read-write | current | The status of forwarding SNMP operations through syslog protocol. |
| 1.3.6.1.4.1.3902.1015.1.1.102.10 | TablezxAnSysSnmpOperOidExceptTable | not-accessible | current | This table includes the oid group of SNMP operation which is excluded from forwarding. |
| 1.3.6.1.4.1.3902.1015.1.1.102.10.1 | RowzxAnSysSnmpOperOidExceptEntry | not-accessible | current | An entry in zxAnSysSnmpOperOidExceptTable. |
| 1.3.6.1.4.1.3902.1015.1.1.102.10.1.1 | ColumnzxAnSysSnmpOidId | not-accessible | current | Id of this SNMP OID entry. |
| 1.3.6.1.4.1.3902.1015.1.1.102.10.1.2 | ColumnzxAnSysSnmpOidItem | read-create | current | SNMP OID which is excluded from forwarding through syslog. |
| 1.3.6.1.4.1.3902.1015.1.1.102.10.1.10 | ColumnzxAnSysSnmpOidRowStatus | read-create | current | Rowstatus to create or delete a row of this entry. |
| 1.3.6.1.4.1.3902.1015.1.1.103 | NodezxAnLog | |||
| 1.3.6.1.4.1.3902.1015.1.1.103.1 | TablezxAnLogTypeTable | not-accessible | current | log type definition table, it store all the types and levels supported. |
| 1.3.6.1.4.1.3902.1015.1.1.103.1.1 | RowzxAnLogTypeEntry | not-accessible | current | An entry in zxAnLogTypeTable. |
| 1.3.6.1.4.1.3902.1015.1.1.103.1.1.1 | ColumnzxAnLogType | not-accessible | current | the log type |
| 1.3.6.1.4.1.3902.1015.1.1.103.1.1.2 | ColumnzxAnLogLevel | not-accessible | current | The log level, value 0 means there is no level definition of current type. |
| 1.3.6.1.4.1.3902.1015.1.1.103.1.1.3 | ColumnzxAnLogTypeDesc | read-only | current | The description of current log type and level. The format is TYPE|LEVEL|DESCRIPTION, divided by |. |
| 1.3.6.1.4.1.3902.1015.1.1.103.2 | TablezxAnLogConfTable | not-accessible | current | log configuration table, it used to configure the log of type and level. |
| 1.3.6.1.4.1.3902.1015.1.1.103.2.1 | RowzxAnLogConfEntry | not-accessible | current | An entry in zxAnLogConfTable. |
| 1.3.6.1.4.1.3902.1015.1.1.103.2.1.1 | ColumnzxAnLogConfType | not-accessible | current | the log type |
| 1.3.6.1.4.1.3902.1015.1.1.103.2.1.2 | ColumnzxAnLogConfLevel | not-accessible | current | The log level, value 0 means there is no level definition of current type. |
| 1.3.6.1.4.1.3902.1015.1.1.103.2.1.3 | ColumnzxAnLogCapability | read-only | current | the log capability for given level of given type. syslog(0): tranfer to syslog, this bit is only used by MAP. memory(1): save to memory, it will lost after NE … |
| 1.3.6.1.4.1.3902.1015.1.1.103.2.1.4 | ColumnzxAnLogConfig | read-write | current | the log configuration for given level of given type. syslog(0): tranfer to syslog, this bit is only used by MAP. memory(1): save to memory, it will lost after … |
| 1.3.6.1.4.1.3902.1015.1.1.103.10 | NodezxAnLogGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.103.10.1 | ScalarzxAnLogClear | read-write | current | zxAnLogClear uses a complex coding to support different types and different levels log clear. | Byte 3 | Byte 2 | Byte 1 | Byte 0 | | | Reserved | log type | l… |
| 1.3.6.1.4.1.3902.1015.1.1.104 | NodezxAnSysClockMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.104.1 | ScalarzxAnSysConfigClockSource | read-write | current | Configured clock source. bitse1(1):E1 clock. bits2m(2):backplane X56 clock. est2m(3):DTI card E1 clock. ttl2m(4):backplane X92 clock. e12ml(5):right control ca… |
| 1.3.6.1.4.1.3902.1015.1.1.104.2 | ScalarzxAnSysActualClockSource | read-only | current | Actual clock source. |
| 1.3.6.1.4.1.3902.1015.1.1.104.3 | ScalarzxAnSysSupportClockSource | read-only | current | The clock source list supported by this equipment. No recomanded to display it in NMS |
| 1.3.6.1.4.1.3902.1015.1.1.104.4 | ScalarzxAnSysAvailableClockSource | read-only | current | Current available clock source list. |
| 1.3.6.1.4.1.3902.1015.1.1.104.5 | ScalarzxAnSysClockSourcePriority | read-write | current | Clock source priority. For example, the string '3,4,2,5,6,1' means there are 6 priorities. And priority 1 is clock source 3(est2m),priority 2 is clock source 4… |
| 1.3.6.1.4.1.3902.1015.1.1.104.6 | ScalarzxAnSysActualClockSourceE1 | read-only | current | Actual clock source E1 position. For example,'1-1-8-1' means rack 1 shelf 1 slot 8 E1 1. |
| 1.3.6.1.4.1.3902.1015.1.1.104.7 | ScalarzxAnSysLastClockSource | read-only | current | Last clock source. |
| 1.3.6.1.4.1.3902.1015.1.1.104.8 | ScalarzxAnSysLastClockSourceE1 | read-only | current | Last clock source E1 position. For example,'1-1-8-1' means rack 1 shelf 1 slot 8 E1 1. |
| 1.3.6.1.4.1.3902.1015.1.1.104.9 | ScalarzxAnSysClockSourceTrapEnable | read-write | current | Enables and disables the trap of clock source unavailable. Value 0 means disable the trap of this clock source. Value 1 means enable the trap of this clock sou… |
| 1.3.6.1.4.1.3902.1015.1.1.104.10 | ScalarzxAnSysClockSourceIfType | read-write | current | Clock source interface type. |
| 1.3.6.1.4.1.3902.1015.1.1.104.100 | TablezxAnSysDsx1ClockSourceTable | not-accessible | current | A table of E1 clock source list. |
| 1.3.6.1.4.1.3902.1015.1.1.104.100.1 | RowzxAnSysDsx1ClockSourceEntry | not-accessible | current | Entry of E1 clock source table. |
| 1.3.6.1.4.1.3902.1015.1.1.104.100.1.1 | ColumnzxAnSysDsx1ClkSrcRack | not-accessible | current | Rack of E1 clock source. |
| 1.3.6.1.4.1.3902.1015.1.1.104.100.1.2 | ColumnzxAnSysDsx1ClkSrcShelf | not-accessible | current | Shelf of E1 clock source. |
| 1.3.6.1.4.1.3902.1015.1.1.104.100.1.3 | ColumnzxAnSysDsx1ClkSrcSlot | not-accessible | current | Slot of E1 clock source. |
| 1.3.6.1.4.1.3902.1015.1.1.104.100.1.4 | ColumnzxAnSysDsx1ClkSrcLinkNo | not-accessible | current | Link number of E1 clock source. |
| 1.3.6.1.4.1.3902.1015.1.1.104.100.1.5 | ColumnzxAnSysDsx1ClkSrcAvailableStatus | read-only | current | The available status of E1 clock source. |
| 1.3.6.1.4.1.3902.1015.1.1.104.100.1.6 | ColumnzxAnSysDsx1ClkSrcCurrUsingStatus | read-only | current | The current using status of E1 clock source. 'inUse' indicates that this E1 is used as clock source currently. And only one E1 will be used as clock source cur… |
| 1.3.6.1.4.1.3902.1015.1.1.104.100.1.7 | ColumnzxAnSysDsx1ClkSrcPriority | read-write | current | The priority of E1 clock source. The value range is from 1 to the maximum number of E1 clock source. For example, if NE supports 32 E1, the valid value will be… |
| 1.3.6.1.4.1.3902.1015.1.1.105 | NodezxAnSysIpv6GlobalMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.105.1 | ScalarzxAnSysIpv6GlobalEnable | read-write | current | Enable/Disable IPv6. |
| 1.3.6.1.4.1.3902.1015.1.1.106 | NodezxAnSysDns | |||
| 1.3.6.1.4.1.3902.1015.1.1.106.1 | TablezxAnSysDnsServerTable | not-accessible | current | A table of DNS server configuration. |
| 1.3.6.1.4.1.3902.1015.1.1.106.1.1 | RowzxAnSysDnsServerEntry | not-accessible | current | A list of DNS servers. |
| 1.3.6.1.4.1.3902.1015.1.1.106.1.1.1 | ColumnzxAnSysDnsServerIpAddressType | not-accessible | current | This object indicates the type of DNS server IP address. |
| 1.3.6.1.4.1.3902.1015.1.1.106.1.1.2 | ColumnzxAnSysDnsServerIpAddress | not-accessible | current | This Objects allows an NMS to configure a DNS server IP address. |
| 1.3.6.1.4.1.3902.1015.1.1.106.1.1.3 | ColumnzxAnSysDnsServerType | read-create | current | This Objects allows an NMS to specify whether the Server IP address is the primary DNS server or the secondary DNS server. Only One Primary DNS server is allow… |
| 1.3.6.1.4.1.3902.1015.1.1.106.1.1.10 | ColumnzxAnSysDnsServerRowStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1015.1.1.106.50 | NodezxAnSysDnsGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.106.50.1 | ScalarzxAnSysDnsRequestMode | read-write | current | DNS request mode. ttl(1) - Request the DNS server with the interval of TTL. requestOnceWhenPowerOn(2) - Request the DNS server once when system power on. |
| 1.3.6.1.4.1.3902.1015.1.1.107 | NodezxAnSysOutbandPortMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.107.1 | ScalarzxAnSysOutbandPortAdminStatus | read-write | current | The desired state of the interface. |
| 1.3.6.1.4.1.3902.1015.1.1.107.2 | ScalarzxAnSysOutbandPortOperStatus | read-only | current | The current operational state of the interface. |
| 1.3.6.1.4.1.3902.1015.1.1.107.3 | ScalarzxAnSysOutbandPortDuplexSpeed | read-write | current | DURABLE: { auto_negotiate:all } The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(9… |
| 1.3.6.1.4.1.3902.1015.1.1.107.4 | ScalarzxAnSysOutbandPortActualDuplex | read-only | current | The actual duplex for this interface. |
| 1.3.6.1.4.1.3902.1015.1.1.107.5 | ScalarzxAnSysOutbandPortActualSpeed | read-only | current | The actual speed for this interface. |
| 1.3.6.1.4.1.3902.1015.1.1.107.6 | ScalarzxAnSysOutbandPortTagMode | read-write | current | The tag mode for this interface. untagged(1):zxAnSysOutbandPortVlanId and zxAnSysOutbandPortCos are invalid. tagged(2): zxAnSysOutbandPortVlanId is required. z… |
| 1.3.6.1.4.1.3902.1015.1.1.107.7 | ScalarzxAnSysOutbandPortVlanId | read-write | current | VLAN ID for this interface. Value 0 means unconfigured. |
| 1.3.6.1.4.1.3902.1015.1.1.107.8 | ScalarzxAnSysOutbandPortCos | read-write | current | CoS value for this interface. Value 255 means unconfigured. |
| 1.3.6.1.4.1.3902.1015.1.1.108 | NodezxAnSysSnmpMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.108.1 | ScalarzxAnSnmpEngineIdGenerateMode | read-write | current | It determines how to generate the SnmpEngineID. |
| 1.3.6.1.4.1.3902.1015.1.1.108.2 | ScalarzxAnSnmpSupportedVersion | read-write | current | |
| 1.3.6.1.4.1.3902.1015.1.1.109 | NodezxAnSysProfileOperMgmt | |||
| 1.3.6.1.4.1.3902.1015.1.1.109.1 | NodezxAnSysProfileOperGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.109.1.1 | ScalarzxAnSysProfileCategory | accessible-for-notify | current | This object indicates the category of profile. |
| 1.3.6.1.4.1.3902.1015.1.1.109.1.2 | ScalarzxAnSysProfileName | accessible-for-notify | current | This object is used to indicate the profile name. Empty string means that the profile does not support profile name. |
| 1.3.6.1.4.1.3902.1015.1.1.109.1.3 | ScalarzxAnSysProfileId | accessible-for-notify | current | This object is used to indicate the profile ID. Value 0 means that the profile does not support ID. |
| 1.3.6.1.4.1.3902.1015.1.1.109.1.4 | ScalarzxAnSysProfileInfo | accessible-for-notify | current | This object is used to indicate the profile information, such as showing the port list that the profile has been applied. |
| 1.3.6.1.4.1.3902.1015.1.1.110 | NodezxAnSysMgmtArp | |||
| 1.3.6.1.4.1.3902.1015.1.1.110.1 | NodezxAnSysMgmtArpGlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1.1.110.1.1 | ScalarzxAnSysMgmtArpAgingTime | read-write | current | The management aging time for the ARP table of current device. |
| 1.3.6.1.4.1.3902.1015.1.2 | NodezxAnSysTrapObjects | |||
| 1.3.6.1.4.1.3902.1015.1.2.5 | NodezxAnSysNtpTrapGroup | |||
| 1.3.6.1.4.1.3902.1015.1.2.5.1 | NotificationzxAnSysNtpOffsetOverThreshTrap | current | zxAnSysNtpOffsetAlarmThreshold is reached. | |
| 1.3.6.1.4.1.3902.1015.1.2.5.2 | NotificationzxAnSysNtpOffsetUnderThreshTrap | current | zxAnSysNtpCurrentOffset is below zxAnSysNtpOffsetAlarmThreshold. | |
| 1.3.6.1.4.1.3902.1015.1.2.6 | NodezxAnSysSecurityTrapGroup | |||
| 1.3.6.1.4.1.3902.1015.1.2.6.1 | NotificationzxAnSysSecCrftTerminLogonTrap | current | User has logon equipment through the craft terminal interface. | |
| 1.3.6.1.4.1.3902.1015.1.2.6.2 | NotificationzxAnSysSecCrftTerminLogoutTrap | current | User has logout equipment from the craft terminal interface. | |
| 1.3.6.1.4.1.3902.1015.1.2.6.3 | NotificationzxAnSysSecCrftTerminLoginFailed | current | Notification when a user login failed. When a user login failed from console, the zxAnCliTryToLoginUserName and zxAnCliTryToLoginUserLocation is empty string. … | |
| 1.3.6.1.4.1.3902.1015.1.2.7 | NodezxAnSysSummerTimeTrapGroup | |||
| 1.3.6.1.4.1.3902.1015.1.2.7.1 | NotificationzxAnSysSummerTimeStartTrap | current | It indication the summer time feature is start on this device. | |
| 1.3.6.1.4.1.3902.1015.1.2.7.2 | NotificationzxAnSysSummerTimeEndTrap | current | It indication the summer time feature is end on this device. | |
| 1.3.6.1.4.1.3902.1015.1.2.8 | NodezxAnSysClockTrapGroup | |||
| 1.3.6.1.4.1.3902.1015.1.2.8.1 | NotificationzxAnSysClockSourceSwitchTrap | current | The clock source of NE has been switched. | |
| 1.3.6.1.4.1.3902.1015.1.2.8.2 | NotificationzxAnSysClkSrcUnavailableTrap | current | The clock source is unavailable. | |
| 1.3.6.1.4.1.3902.1015.1.2.8.3 | NotificationzxAnSysClkSrcAvailableTrap | current | The clock source is available. | |
| 1.3.6.1.4.1.3902.1015.1.2.9 | NodezxAnSysProfileOperTrapGroup | |||
| 1.3.6.1.4.1.3902.1015.1.2.9.1 | NotificationzxAnSysDelAppliedPrfFailedNotify | current | This notification will be sent to managemet system when a profile that has been applied is deleted. If profile supports name, zxAnSysProfileName must be filled… | |
| 1.3.6.1.4.1.3902.1015.1.2.10 | NodezxAnSysResourceTrapGroup | |||
| 1.3.6.1.4.1.3902.1015.1.2.10.1 | NotificationzxAnSysResourceInsufficientTrap | current | This message will be sent to managemet system when system resource is insufficient. |