ZTE-AN-XDSL2-MIB
260 objects
This MIB defines managed objects of zte xDSL mgmt .
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.1015 | NodezxAn | |||
| 1.3.6.1.4.1.3902.1015.1001 | IdentityzxAnXdsl2Mib | This MIB defines managed objects of zte xDSL mgmt . | ||
| 1.3.6.1.4.1.3902.1015.1001.1 | NodezxAnXdsl2Objects | |||
| 1.3.6.1.4.1.3902.1015.1001.1.1 | NodezxAnXdsl2GlobalObjects | |||
| 1.3.6.1.4.1.3902.1015.1001.1.2 | NodezxAnXdsl2Line | |||
| 1.3.6.1.4.1.3902.1015.1001.1.2.1 | TablezxAnXdsl2LineTable | not-accessible | current | The table zxAnXdsl2LineTable contains configuration, command and status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line. The index of this table is an interf… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1 | RowzxAnXdsl2LineEntry | not-accessible | current | The table zxAnXdsl2LineTable contains configuration, commands and status parameters of the VDSL2/ADSL/ADSL2 or ADSL2+ line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.1 | ColumnzxAnXdsl2LineBaseConfProfile | read-write | current | The value of this object identifies the row in the xDSL2 Line Basic Profile Table, (zxAnZxAnXdsl2BaseConfProfTable), which applies for this line. This object M… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.2 | ColumnzxAnXdsl2LineSrvcConfProfile | read-write | current | The value of this object identifies the row in the xDSL2 Line Service Profile Table, (zxAnZxAnXdsl2ServiceConfProfTable), which applies for this line. This obj… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.3 | ColumnzxAnXdsl2LineDpboConfProfile | read-write | current | The value of this object identifies the row in the xDSL2 Line Dpbo Profile Table, (zxAnZxAnXdsl2DpboConfProfTable), which applies for this line. This object MU… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.4 | ColumnzxAnXdsl2LineUpboConfProfile | read-write | current | The value of this object identifies the row in the xDSL2 Line Upbo Profile Table, (zxAnXdsl2UpboConfProfTable), which applies for this line. This object MUST b… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.5 | ColumnzxAnXdsl2LineAlmThreshPrfName | read-write | current | The value of this object identifies the row in the xDSL2 Line Alarm Configuration Profile Table, (zxAnXdsl2LineAlarmConfProfTable), which applies to this line.… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.6 | ColumnzxAnXdsl2LineCmndConfPmsf | read-write | current | Power management state forced (PMSF). Defines the line states to be forced by the near-end xTU on this line. The various possible values are: l3toL0 (0), l0toL… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.7 | ColumnzxAnXdsl2LineCmndConfLdsf | read-write | current | Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end xTU on this line or only be respo… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.8 | ColumnzxAnXdsl2LineCmndConfLdsfFailReason | read-only | current | The status of the recent occasion the Loop diagnostics mode forced (LDSF) was issued for the associated line. Possible values are: none (1) - The default value… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.9 | ColumnzxAnXdsl2LineCmndAutomodeColdStart | read-write | current | Automode cold start forced. This parameter is defined in order to improve testing of the performance of xTUs supporting automode when it is enabled in the MIB.… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.10 | ColumnzxAnXdsl2LineStatusXtuTransSys | read-only | current | The xTU Transmission System (xTS) in use. It is coded in a bit-map representation with one bit set to '1' (the selected coding for the DSL line). This paramete… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.11 | ColumnzxAnXdsl2LineStatusPwrMngState | read-only | current | The current power management state. One of four possible power management states: L0 - Synchronized and full transmission (i.e., Showtime), L1 - Low Power with… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.12 | ColumnzxAnXdsl2LineStatusInitResult | read-only | current | Indicates the result of the last full initialization performed on the line. It is an enumeration type with the following values: noFail(0), configError(1), con… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.13 | ColumnzxAnXdsl2LineStatusLastStateDs | read-only | current | The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.14 | ColumnzxAnXdsl2LineStatusLastStateUs | read-only | current | The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.15 | ColumnzxAnXdsl2LineStatusXtur | read-only | current | Indicates current state (existing failures) of the xTU-R. This is a bit-map of possible conditions. This BITS structure can report the following failures: noDe… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.16 | ColumnzxAnXdsl2LineStatusXtuc | read-only | current | Indicates current state (existing failures) of the xTU-C. This is a bit-map of possible conditions. This BITS structure can report the following failures: noDe… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.17 | ColumnzxAnXdsl2LineStatusAttainableRateDs | read-only | current | Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the xTU-C transmitter and the xTU-R receiver, coded in bi… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.18 | ColumnzxAnXdsl2LineStatusAttainableRateUs | read-only | current | Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the xTU-R transmitter and the xTU-C receiver, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.19 | ColumnzxAnXdsl2LineStatusActPsdDs | read-only | current | Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units o… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.20 | ColumnzxAnXdsl2LineStatusActPsdUs | read-only | current | Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.21 | ColumnzxAnXdsl2LineStatusActAtpDs | read-only | current | Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.22 | ColumnzxAnXdsl2LineStatusActAtpUs | read-only | current | Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the xTU-R at the U-R reference point, at the instant of measurement. … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.23 | ColumnzxAnXdsl2LineStatusActStandardPrf | read-only | current | Actual Standard Profile used by this connection. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.24 | ColumnzxAnXdsl2LineDataPathType | read-write | current | Data path type of this line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.25 | ColumnzxAnXdsl2LineStatusActLimitMask | read-only | current | The Limit PSD mask and band plan in use. The configuration parameter xdsl2LConfProfLimitMask defines the set of allowed G.993.2 limit PSD masks. This parameter… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.26 | ColumnzxAnXdsl2LineStatusActSnrModeDs | read-only | current | This parameter indicates if the transmitter referred virtual noise is active on the line in the downstream direction. The configuration parameter xdsl2LConfPro… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.27 | ColumnzxAnXdsl2LineStatusActSnrModeUs | read-only | current | This parameter indicates if the transmitter referred virtual noise is active on the line in the upstream direction. The configuration parameter xdsl2LConfProfS… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.28 | ColumnzxAnXdsl2LineStatusElectricalLength | read-only | current | (UPBOKLE) This parameter contains the estimated electrical length expressed in dB at 1 MHz, kl0. This is the final electrical length that would have been sent … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.29 | ColumnzxAnXdsl2LineStatusTrellisDs | read-only | current | This parameter reports whether trellis coding is in use in the downstream direction. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.30 | ColumnzxAnXdsl2LineStatusTrellisUs | read-only | current | This parameter reports whether trellis coding is in use in the upstream direction. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.31 | ColumnzxAnXdsl2LineStatusActualCe | read-only | current | (ACTUALCE) This parameter reports the cyclic extension used on the line. It is coded as an unsigned integer from 2 to 16 in units of N/32 samples, where 2N is … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.32 | ColumnzxAnXdsl2LineStatusOperState | read-only | current | The operational status of the line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.33 | ColumnzxAnXdsl2LineStatusActDataPathType | read-only | current | Actual data path type of this line. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.34 | ColumnzxAnXdsl2LineCmndPMReset | read-write | current | Reset the performance monitoring results of single line. currentPerf(0) - reset the current performance monitoring results. it will affect only current real-ti… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.35 | ColumnzxAnXdsl2LineExtConfProfile | read-write | current | The value of this object identifies the row in the xDSL2 Line Ext Profile Table, (zxAnXdsl2LnExtConfPrfTable), which applies for this line. This object MUST be… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.36 | ColumnzxAnXdsl2LineStatusLnAttenDs | read-only | current | Downstream line Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C an… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.37 | ColumnzxAnXdsl2LineStatusLnAttenUs | read-only | current | Upstream line Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.38 | ColumnzxAnXdsl2LineStatusSigAttenDs | read-only | current | Downstream signal Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C … |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.39 | ColumnzxAnXdsl2LineStatusSigAttenUs | read-only | current | Upstream signal Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C an… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.40 | ColumnzxAnXdsl2LineStatusSnrMarginDs | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstr… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.41 | ColumnzxAnXdsl2LineStatusSnrMarginUs | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstr… |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.42 | ColumnzxAnXdsl2LineLofStatsDs | read-only | current | Downstream count of times that there was LOF. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.43 | ColumnzxAnXdsl2LineLofStatsUs | read-only | current | Upstream count of times that there was LOF. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.44 | ColumnzxAnXdsl2LineLolStatsDs | read-only | current | Downstream count of times that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.45 | ColumnzxAnXdsl2LineLolStatsUs | read-only | current | Upstream count of times that there was LOF. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.46 | ColumnzxAnXdsl2LineLprStatsDs | read-only | current | Downstream count of times that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.2.1.1.47 | ColumnzxAnXdsl2LineLprStatsUs | read-only | current | Upstream count of times that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.3 | NodezxAnXdsl2LineProfile | |||
| 1.3.6.1.4.1.3902.1015.1001.1.3.1 | TablezxAnXdsl2BaseConfProfTable | not-accessible | current | The table zxAnXdsl2BaseConfProfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ basic configuration profile. Entries in this table MUST be maintained in a persisten… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1 | RowzxAnXdsl2BaseConfProfEntry | not-accessible | current | The table zxAnXdsl2BaseConfProfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ basic configuration profile. A default profile with an index of 'DEFVAL' will always… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.1 | ColumnzxAnXdsl2BaseConfProfileName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.2 | ColumnzxAnXdsl2LConfProfXtuTransSysEna | read-create | current | xTU Transmission System Enabling (xTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.3 | ColumnzxAnXdsl2LConfProfStandardProfile | read-create | current | The set of profiles which allows the transceivers to support a subset of allowed settings, as defined in G.993.2 Recommendation. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.4 | ColumnzxAnXdsl2LConfProfLimitMask | read-create | current | Limit Mask of the line. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.5 | ColumnzxAnXdsl2LConfProfUs0Disable | read-create | current | Enable or disable the use of US0. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.6 | ColumnzxAnXdsl2LConfProfUs0Mask | read-create | current | The set of profiles which allows the transceivers to support a subset of allowed settings, as defined in G.993.2 Recommendation. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.7 | ColumnzxAnXdsl2LConfProfRfiBandsDs | read-create | current | RfiBands configured in the downstream. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.8 | ColumnzxAnXdsl2LConfProfVdsl2CarMask | read-create | current | (VDSL2-CARMASK). VDSL2 specific Sub-carriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.9 | ColumnzxAnXdsl2LConfProfVdslMaxNomAtpDs | read-create | current | (MAXNOMATPds). The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.10 | ColumnzxAnXdsl2LConfProfVdslMaxNomAtpUs | read-create | current | (MAXNOMATPus). The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.11 | ColumnzxAnXdsl2LConfProfVdslMaxNomPsdDs | read-create | current | (MAXNOMPSDds). The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.12 | ColumnzxAnXdsl2LConfProfVdslMaxNomPsdUs | read-create | current | (MAXNOMPSDus). The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.13 | ColumnzxAnXdsl2LConfProfVdslMaxAggRxPwrUs | read-create | current | (MAXRXPWRus). The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is su… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.14 | ColumnzxAnXdsl2LConfProfAdslMaxNomAtpDs | read-create | current | (MAXNOMATPds). The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.15 | ColumnzxAnXdsl2LConfProfAdslMaxNomAtpUs | read-create | current | (MAXNOMATPus). The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.16 | ColumnzxAnXdsl2LConfProfAdslMaxNomPsdDs | read-create | current | (MAXNOMPSDds). The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.17 | ColumnzxAnXdsl2LConfProfAdslMaxNomPsdUs | read-create | current | (MAXNOMPSDus). The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.18 | ColumnzxAnXdsl2LConfProfAdslMaxAggRxPwrUs | read-create | current | (MAXRXPWRus). The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is su… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.19 | ColumnzxAnXdsl2LConfProfScMaskDs | read-create | current | Sub-carriers mask. A bitmap of 4096 bits that allows masking up to 4096 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1', t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.20 | ColumnzxAnXdsl2LConfProfScMaskUs | read-create | current | Sub-carriers mask. A bitmap of 4096 bits that allows masking up to 4096 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1', t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.21 | ColumnzxAnXdsl2LConfProfRaUsNrmDs | read-create | current | The Downstream Up-Shift Noise Margin value, to be used when zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is above this value … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.22 | ColumnzxAnXdsl2LConfProfRaUsNrmUs | read-create | current | The Upstream Up-Shift Noise Margin value, to be used when zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is above this value and … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.23 | ColumnzxAnXdsl2LConfProfRaUsTimeDs | read-create | current | The Downstream Up-Shift Time Interval, to be used when zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. The interval of time that the downstream noise margin sh… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.24 | ColumnzxAnXdsl2LConfProfRaUsTimeUs | read-create | current | The Upstream Up-Shift Time Interval, to be used when zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.25 | ColumnzxAnXdsl2LConfProfRaDsNrmsDs | read-create | current | The Downstream Down-Shift Noise Margin value, to be used when zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is below this valu… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.26 | ColumnzxAnXdsl2LConfProfRaDsNrmsUs | read-create | current | The Upstream Downshift Noise Margin value, to be used when zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is below this value and… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.27 | ColumnzxAnXdsl2LConfProfRaDsTimeDs | read-create | current | The Downstream Downshift Time Interval, to be used when zxAnXdsl2LConfProfRaModeDs is set to dynamicRa. The interval of time the downstream noise margin should… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.28 | ColumnzxAnXdsl2LConfProfRaDsTimeUs | read-create | current | The Upstream Down-Shift Time Interval, to be used when zxAnXdsl2LConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should st… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.29 | ColumnzxAnXdsl2LConfProfMsgMinUs | read-create | current | Minimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in upstream direction. Expressed in … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.30 | ColumnzxAnXdsl2LConfProfMsgMinDs | read-create | current | Minimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in downstream direction. Expressed… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.31 | ColumnzxAnXdsl2LConfProfPmMode | read-create | current | Power management state Enabling (PMMode). Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. The various bit positions ar… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.32 | ColumnzxAnXdsl2LConfProfL0Time | read-create | current | The minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state (L0-TIME). It ranges from 0 to 255 seconds. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.33 | ColumnzxAnXdsl2LConfProfL2Time | read-create | current | The minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 Sta… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.34 | ColumnzxAnXdsl2LConfProfL2Atpr | read-create | current | The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state (L2… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.35 | ColumnzxAnXdsl2LConfProfL2Atprt | read-create | current | The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.36 | ColumnzxAnXdsl2LConfProfPsdMaskDs | read-create | current | (PSDMASKds). The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakp… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.37 | ColumnzxAnXdsl2LConfProfPsdMaskUs | read-create | current | (PSDMASKus). The upstream PSD mask applicable at the U-R2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.38 | ColumnzxAnXdsl2LConfProfPsdMaskSelectUs | read-create | current | The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.39 | ColumnzxAnXdsl2LConfProfTrellisDs | read-create | current | Enabled or disabled the Trellis of downstream. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.40 | ColumnzxAnXdsl2LConfProfTrellisUs | read-create | current | Enabled or disabled the Trellis of upstream. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.41 | ColumnzxAnXdsl2LConfProfBitswapDs | read-create | current | Enabled or disabled the Bitswap of downstream. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.42 | ColumnzxAnXdsl2LConfProfBitswapUs | read-create | current | Enabled or disabled the Bitswap of upstream. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.43 | ColumnzxAnXdsl2LConfProfRetrainMode | read-create | current | Enabled or disabled the Retrain. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.44 | ColumnzxAnXdsl2LconfProfSnrModeDs | read-create | current | This parameter enables/disables the transmitter referred virtual noise in the downstream direction. If set to 2, the virtual noise is disabled. If set to 1, th… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.45 | ColumnzxAnXdsl2LconfProfSnrModeUs | read-create | current | This parameter enables/disables the transmitter referred virtual noise in the Upstream direction. If set to 2, the virtual noise is disabled. If set to 1, the … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.46 | ColumnzxAnXdsl2LConfProfTxRefVNDs | read-create | current | This configuration parameter defines the downstream transmitter referred virtual noise (TXREFVNds). The TXREFVNds shall be specified through a set of breakpoin… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.47 | ColumnzxAnXdsl2LConfProfTxRefVNUs | read-create | current | This configuration parameter defines the upstream transmitter referred virtual noise (TXREFVNus). The TXREFVNus shall be specified through a set of breakpoints… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.48 | ColumnzxAnXdsl2Ch1ConfProfMinResDataRateDs | read-create | current | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.49 | ColumnzxAnXdsl2Ch1ConfProfMinResDataRateUs | read-create | current | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.50 | ColumnzxAnXdsl2Ch1ConfProfMinDataRateLowPwrDs | read-create | current | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.51 | ColumnzxAnXdsl2Ch1ConfProfMaxBerDs | read-create | current | Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.52 | ColumnzxAnXdsl2Ch1ConfProfMaxBerUs | read-create | current | Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.53 | ColumnzxAnXdsl2Ch1ConfProfImaEnabled | read-create | current | IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is of ATM Data Path. When in 'enable' state, t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.54 | ColumnzxAnXdsl2Ch2ConfProfMinResDataRateDs | read-create | current | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.55 | ColumnzxAnXdsl2Ch2ConfProfMinResDataRateUs | read-create | current | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.56 | ColumnzxAnXdsl2Ch2ConfProfMinDataRateLowPwrDs | read-create | current | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.57 | ColumnzxAnXdsl2Ch2ConfProfMaxBerDs | read-create | current | Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.58 | ColumnzxAnXdsl2Ch2ConfProfMaxBerUs | read-create | current | Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.59 | ColumnzxAnXdsl2Ch2ConfProfImaEnabled | read-create | current | IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is of ATM Data Path. When in 'enable' state, t… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.1.1.64 | ColumnzxAnXdsl2LConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2 | TablezxAnXdsl2ServiceConfProfTable | not-accessible | current | The table zxAnXdsl2ServiceConfProfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ Service configuration profile. Entries in this table MUST be maintained in a pers… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1 | RowzxAnXdsl2ServiceConfProfEntry | not-accessible | current | The table zxAnXdsl2ServiceConfProfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ basic configuration profile. A default profile with an index of 'DEFVAL' will alw… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.1 | ColumnzxAnXdsl2ServiceConfProfileName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.2 | ColumnzxAnXdsl2LConfProfForceInp | read-create | current | Enable /disable force to use INP. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.3 | ColumnzxAnXdsl2LConfProfRaModeDs | read-create | current | The mode of operation of a rate-adaptive xTU-C in the transmit direction. The parameter can take three values: fixed (1), raInit (2), dynamicRa (3). |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.4 | ColumnzxAnXdsl2LConfProfRaModeUs | read-create | current | The mode of operation of a rate-adaptive xTU-R in the transmit direction. The parameter can take three values: fixed (1), raInit (2), dynamicRa (3). |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.5 | ColumnzxAnXdsl2LConfProfTargetSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.6 | ColumnzxAnXdsl2LConfProfTargetSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete i… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.7 | ColumnzxAnXdsl2LConfProfMaxSnrmDs | read-create | current | The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xT… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.8 | ColumnzxAnXdsl2LConfProfMaxSnrmUs | read-create | current | The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xT… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.9 | ColumnzxAnXdsl2LConfProfMinSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.10 | ColumnzxAnXdsl2LConfProfMinSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.11 | ColumnzxAnXdsl2ConfProfCh1Enabled | read-create | current | Enable /disable the bearer channel 1. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.12 | ColumnzxAnXdsl2Ch1ConfChanRaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.13 | ColumnzxAnXdsl2Ch1ConfChanRaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.14 | ColumnzxAnXdsl2Ch1ConfProfMaxDataRateDs | read-create | current | Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.15 | ColumnzxAnXdsl2Ch1ConfProfMaxDataRateUs | read-create | current | Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.16 | ColumnzxAnXdsl2Ch1ConfProfMinDataRateDs | read-create | current | Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.17 | ColumnzxAnXdsl2Ch1ConfProfMinDataRateUs | read-create | current | Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.18 | ColumnzxAnXdsl2Ch1ConfProfMaxDelayDs | read-create | current | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The xTUs shall choos… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.19 | ColumnzxAnXdsl2Ch1ConfProfMaxDelayUs | read-create | current | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The xTUs shall choose th… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.20 | ColumnzxAnXdsl2Ch1ConfProfMinProtectionDs | read-create | current | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.21 | ColumnzxAnXdsl2Ch1ConfProfMinProtectionUs | read-create | current | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.22 | ColumnzxAnXdsl2ConfProfCh2Enabled | read-create | current | Enable /disable the bearer channel 1. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.23 | ColumnzxAnXdsl2Ch2ConfChanRaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.24 | ColumnzxAnXdsl2Ch2ConfChanRaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.25 | ColumnzxAnXdsl2Ch2ConfProfMaxDataRateDs | read-create | current | Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.26 | ColumnzxAnXdsl2Ch2ConfProfMaxDataRateUs | read-create | current | Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.27 | ColumnzxAnXdsl2Ch2ConfProfMinDataRateDs | read-create | current | Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.28 | ColumnzxAnXdsl2Ch2ConfProfMinDataRateUs | read-create | current | Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.29 | ColumnzxAnXdsl2Ch2ConfProfMaxDelayDs | read-create | current | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The xTUs shall choos… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.30 | ColumnzxAnXdsl2Ch2ConfProfMaxDelayUs | read-create | current | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The xTUs shall choose th… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.31 | ColumnzxAnXdsl2Ch2ConfProfMinProtectionDs | read-create | current | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.32 | ColumnzxAnXdsl2Ch2ConfProfMinProtectionUs | read-create | current | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.2.1.40 | ColumnzxAnXdsl2ServiceConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3 | TablezxAnXdsl2DpboConfProfTable | not-accessible | current | The table zxAnXdsl2DpboConfProfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ Dpbo configuration profile. Entries in this table MUST be maintained in a persistent… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1 | RowzxAnXdsl2DpboConfProfEntry | not-accessible | current | The table zxAnXdsl2DpboConfProfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ basic configuration profile. A default profile with an index of 'DEFVAL' will always… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.1 | ColumnzxAnXdsl2DpboConfProfileName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.2 | ColumnzxAnXdsl2LConfProfDpboEPsd | read-create | current | (DPBOEPSD). This configuration parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as zxAn… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.3 | ColumnzxAnXdsl2LConfProfDpboEsEL | read-create | current | (DPBOESEL). This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote fle… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.4 | ColumnzxAnXdsl2LConfProfDpboEsCableModelA | read-create | current | (DPBOESCMA). The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.5 | ColumnzxAnXdsl2LConfProfDpboEsCableModelB | read-create | current | (DPBOESCMB). The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.6 | ColumnzxAnXdsl2LConfProfDpboEsCableModelC | read-create | current | (DPBOESCMC). The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.7 | ColumnzxAnXdsl2LConfProfDpboMus | read-create | current | (DPBOMUS). This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange based services, used to modify parameter z… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.8 | ColumnzxAnXdsl2LConfProfDpboFMin | read-create | current | (DPBOFMIN). This configuration parameter defines the minimum frequency from which the DPBO shall be applied. It ranges from 0 kHz (coded as 0) to 8832 kHz (cod… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.9 | ColumnzxAnXdsl2LConfProfDpboFMax | read-create | current | (DPBOFMAX). This configuration parameter defines the maximum frequency at which DPBO may be applied. It ranges from 138 kHz (coded as 32) to 29997.75 kHz (code… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.3.1.20 | ColumnzxAnXdsl2DpboConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4 | TablezxAnXdsl2UpboConfProfTable | not-accessible | current | The table xdsl2UpboConfProfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ Upbo configuration profile. Entries in this table MUST be maintained in a persistent man… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1 | RowzxAnXdsl2UpboConfProfEntry | not-accessible | current | The table xdsl2UpboConfProfTable contains VDSL2/ADSL/ ADSL2 and ADSL2+ basic configuration profile. A default profile with an index of 'DEFVAL' will always exi… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.1 | ColumnzxAnXdsl2LUpboConfProfileName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.2 | ColumnzxAnXdsl2LConfProfUpboKL | read-create | current | (UPBOKL). This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value ranges from 0 (coded as … |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.3 | ColumnzxAnXdsl2LConfProfUpboKLF | read-create | current | Defines the upstream power backoff force mode (UPBOKLF). The three possible mode values are: auto(1), override(2), & disableUpbo(3). |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.4 | ColumnzxAnXdsl2LConfProfUpboU0bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.5 | ColumnzxAnXdsl2LConfProfUpboU0bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.6 | ColumnzxAnXdsl2LConfProfUpboU1bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.7 | ColumnzxAnXdsl2LConfProfUpboU1bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.8 | ColumnzxAnXdsl2LConfProfUpboU2bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.9 | ColumnzxAnXdsl2LConfProfUpboU2bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.10 | ColumnzxAnXdsl2LConfProfUpboU3bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.11 | ColumnzxAnXdsl2LConfProfUpboU3bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.12 | ColumnzxAnXdsl2LConfProfUpboU4bandPsdA | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.13 | ColumnzxAnXdsl2LConfProfUpboU4bandPsdB | read-create | current | (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the up… |
| 1.3.6.1.4.1.3902.1015.1001.1.3.4.1.20 | ColumnzxAnXdsl2LUpboConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.4 | NodezxAnXdsl2AlarmProfile | |||
| 1.3.6.1.4.1.3902.1015.1001.1.4.1 | TablezxAnXdsl2AlmThreshPrfTable | not-accessible | current | The table zxAnXdsl2AlmThreshPrfTable contains DSL line PM thresholds profiles. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1 | RowzxAnXdsl2AlmThreshPrfEntry | not-accessible | current | The table zxAnXdsl2AlmThreshPrfTable contains DSL line PM thresholds profiles. A default profile with an index of 'DEFVAL' will always exist and its parameters… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.1 | ColumnzxAnXdsl2AlmThreshPrfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.2 | ColumnzxAnXdsl2XtucThreshFecs | read-create | current | A threshold for the xdsl2PMLCurr15MFecs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.3 | ColumnzxAnXdsl2XtucThreshEs | read-create | current | A threshold for the xdsl2PMLCurr15MEs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.4 | ColumnzxAnXdsl2XtucThreshSes | read-create | current | A threshold for the xdsl2PMLCurr15MSes counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.5 | ColumnzxAnXdsl2XtucThreshLoss | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated cou… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.6 | ColumnzxAnXdsl2XtucThreshLofs | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.7 | ColumnzxAnXdsl2XtucThreshLols | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.8 | ColumnzxAnXdsl2XtucThreshLprs | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.9 | ColumnzxAnXdsl2XtucThreshUas | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MUas counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated coun… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.10 | ColumnzxAnXdsl2XtucThreshPtmCrcErrs | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.11 | ColumnzxAnXdsl2XtucThreshPtmCodViol | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.12 | ColumnzxAnXdsl2XturThreshFecs | read-create | current | A threshold for the xdsl2PMLCurr15MFecs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.13 | ColumnzxAnXdsl2XturThreshEs | read-create | current | A threshold for the xdsl2PMLCurr15MEs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.14 | ColumnzxAnXdsl2XturThreshSes | read-create | current | A threshold for the xdsl2PMLCurr15MSes counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.15 | ColumnzxAnXdsl2XturThreshLoss | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.16 | ColumnzxAnXdsl2XturThreshLofs | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.18 | ColumnzxAnXdsl2XturThreshLprs | read-create | current | A threshold for the xdsl2PMLCurr15MLoss counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.19 | ColumnzxAnXdsl2XturThreshUas | read-create | current | A threshold for the xdsl2PMLCurr15MUas counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.20 | ColumnzxAnXdsl2XturThreshPtmCrcErrs | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MPtmCrcErrs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.21 | ColumnzxAnXdsl2XturThreshPtmCodViol | read-create | current | A threshold for the zxAnXdsl2PMLCurr15MPtmCodViol counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associat… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.22 | ColumnzxAnXdsl2ThreshFailedFullInt | read-create | current | A threshold for the xdsl2PMLCurrInit15MfailedFullInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.23 | ColumnzxAnXdsl2ThreshFailedShrtInt | read-create | current | A threshold for the xdsl2PMLCurrInit15MFailedShortInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.24 | ColumnzxAnXdsl2Ch1XtucThrshCodeViol | read-create | current | A threshold for the xdsl2PMChCurr15MCodingViolations counter, when xdsl2PMChCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the asso… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.25 | ColumnzxAnXdsl2Ch1XtucThrshCorrected | read-create | current | A threshold for the xdsl2PMChCurr15MCorrectedBlocks counter, when xdsl2PMChCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the assoc… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.26 | ColumnzxAnXdsl2Ch1XturThrshCodeViol | read-create | current | A threshold for the xdsl2PMChCurr15MCodingViolations counter, when xdsl2PMChCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the asso… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.27 | ColumnzxAnXdsl2Ch1XturThrshCorrected | read-create | current | A threshold for the xdsl2PMChCurr15MCorrectedBlocks counter, when xdsl2PMChCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the assoc… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.28 | ColumnzxAnXdsl2Ch2XtucThrshCodeViol | read-create | current | A threshold for the xdsl2PMChCurr15MCodingViolations counter, when xdsl2PMChCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the asso… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.29 | ColumnzxAnXdsl2Ch2XtucThrshCorrected | read-create | current | A threshold for the xdsl2PMChCurr15MCorrectedBlocks counter, when xdsl2PMChCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the assoc… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.30 | ColumnzxAnXdsl2Ch2XturThrshCodeViol | read-create | current | A threshold for the xdsl2PMChCurr15MCodingViolations counter, when xdsl2PMChCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the asso… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.31 | ColumnzxAnXdsl2Ch2XturThrshCorrected | read-create | current | A threshold for the xdsl2PMChCurr15MCorrectedBlocks counter, when xdsl2PMChCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the assoc… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.32 | ColumnzxAnXdsl2AlmThreshPrfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.33 | ColumnzxAnXdsl2XtucLowDataRateTolerance | read-create | current | Tolerance between zxAnXdsl2ChConfMaxDataRateDs and xdsl2ChStatusActDataRate(xtuc). Calculation: 100*(zxAnXdsl2ChConfMaxDataRateDs - xdsl2ChStatusActDataRate(xt… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.34 | ColumnzxAnXdsl2XturLowDataRateTolerance | read-create | current | Tolerance between zxAnXdsl2ChConfMaxDataRateUs and xdsl2ChStatusActDataRate(xtur). Calculation: 100*(zxAnXdsl2ChConfMaxDataRateUs - xdsl2ChStatusActDataRate(xt… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.35 | ColumnzxAnXdsl2XtucLowDataRateThresh | read-create | current | Threshold of xtuc data rate. If xdsl2ChStatusActDataRate(xtuc) is lower than zxAnXdsl2XtucLowDataRateThresh, zxAnXdsl2LineXtucLowDataRateTrap will be sent. A v… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.36 | ColumnzxAnXdsl2XturLowDataRateThresh | read-create | current | Threshold of xtur data rate. If xdsl2ChStatusActDataRate(xtur) is lower than zxAnXdsl2XturLowDataRateThresh, zxAnXdsl2LineXturLowDataRateTrap will be sent. A v… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.37 | ColumnzxAnXdsl2XtucInitFailTrapEnable | read-create | current | Enables and disables the InitFailureTrap on the xTU-C interface. unused1 (0) - This bit is no use to enable or disable the InitFailureTrap on the xTU-C interfa… |
| 1.3.6.1.4.1.3902.1015.1001.1.4.1.1.38 | ColumnzxAnXdsl2XturInitFailTrapEnable | read-create | current | Enables and disables the InitFailureTrap on the xTU-R interface. unused1 (0) - This bit is no use to enable or disable the InitFailureTrap on the xTU-R interfa… |
| 1.3.6.1.4.1.3902.1015.1001.1.5 | NodezxAnXdsl2PMLine | |||
| 1.3.6.1.4.1.3902.1015.1001.1.5.1 | TablezxAnXdsl2PMLineCurrTable | not-accessible | current | The table zxAnXdsl2PMLineCurrTable contains current Performance Monitoring results of DSL line. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1 | RowzxAnXdsl2PMLineCurrEntry | not-accessible | current | The table zxAnXdsl2PMLineCurrTable contains current Performance Monitoring results of DSL line. The index of this table is an interface index where the interfa… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.1 | ColumnzxAnXdsl2PMLCurr15MLofs | read-only | current | Count of seconds during this interval that there was LOF . |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.2 | ColumnzxAnXdsl2PMLCurr15MLols | read-only | current | Count of seconds during this interval that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.3 | ColumnzxAnXdsl2PMLCurr15MLprs | read-only | current | Count of seconds during this interval that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.4 | ColumnzxAnXdsl2PMLCurr15MPtmCrcErrs | read-only | current | Count of the number of occurrences of Ptm Crc Errors during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.5 | ColumnzxAnXdsl2PMLCurr15MPtmCodViol | read-only | current | Count of the number of occurrences of Ptm coding violations during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.6 | ColumnzxAnXdsl2PMLCurr1DayLofs | read-only | current | Count of seconds during this interval that there was LOF. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.7 | ColumnzxAnXdsl2PMLCurr1DayLols | read-only | current | Count of seconds during this interval that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.8 | ColumnzxAnXdsl2PMLCurr1DayLprs | read-only | current | Count of seconds during this interval that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.9 | ColumnzxAnXdsl2PMLCurr1DayPtmCrcErrs | read-only | current | Count of the number of occurrences of Ptm Crc Errors during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.1.1.10 | ColumnzxAnXdsl2PMLCurr1DayPtmCodViol | read-only | current | Count of the number of occurrences of Ptm coding violations during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2 | TablezxAnXdsl2PMLineHist15MinTable | not-accessible | current | The table zxAnXdsl2PMLineHist15MinTable contains history Performance Monitoring results for 15min of DSL line. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1 | RowzxAnXdsl2PMLineHist15MinEntry | not-accessible | current | The table zxAnXdsl2PMLineHist15MinTable contains history Performance Monitoring results for 15min of DSL line. The index of this table is an interface index wh… |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.1 | ColumnzxAnXdsl2PMLHist15MMonitoredTime | read-only | current | Total seconds monitored in this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.2 | ColumnzxAnXdsl2PMLHist15MLofs | read-only | current | Count of seconds during this interval that there was LOF . |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.3 | ColumnzxAnXdsl2PMLHist15MLols | read-only | current | Count of seconds during this interval that there was LOL. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.4 | ColumnzxAnXdsl2PMLHist15MLprs | read-only | current | Count of seconds during this interval that there was LPR. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.5 | ColumnzxAnXdsl2PMLHist15MPtmCrcErrs | read-only | current | Count of the number of occurrences of Ptm Crc Errors during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.6 | ColumnzxAnXdsl2PMLHist15MPtmCodViol | read-only | current | Count of the number of occurrences of Ptm coding violations during this interval. |
| 1.3.6.1.4.1.3902.1015.1001.1.5.2.1.7 | ColumnzxAnXdsl2PMLHist15MValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.3902.1015.1001.3 | NodezxAnXdsl2TrapObjects | |||
| 1.3.6.1.4.1.3902.1015.1001.3.1 | NotificationzxAnXdsl2LinePerfLOFSThreshXtuc | current | This notification indicates that the LOF seconds threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.2 | NotificationzxAnXdsl2LinePerfLOFSThreshXtur | current | This notification indicates that the LOF seconds threshold has been reached/exceeded for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.3 | NotificationzxAnXdsl2LinePerfLOLSThreshXtuc | current | This notification indicates that the LOL seconds threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.5 | NotificationzxAnXdsl2LinePerfLPRSThreshXtuc | current | This notification indicates that the LPR seconds threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.6 | NotificationzxAnXdsl2LinePerfLPRSThreshXtur | current | This notification indicates that the LPR seconds threshold has been reached/exceeded for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.7 | NotificationzxAnXdsl2LinePerfPtmCrcErrsThreshXtuc | current | This notification indicates that the Ptm Crc Errors threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.8 | NotificationzxAnXdsl2LinePerfPtmCrcErrsThreshXtur | current | This notification indicates that the Ptm Crc Errors threshold has been reached/exceeded for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.9 | NotificationzxAnXdsl2LinePerfPtmCodViolsThreshXtuc | current | This notification indicates that the Ptm coding violations threshold has been reached/exceeded for the referred XTU-C. | |
| 1.3.6.1.4.1.3902.1015.1001.3.10 | NotificationzxAnXdsl2LinePerfPtmCodViolsThreshXtur | current | This notification indicates that the Ptm coding violations threshold has been reached/exceeded for the referred XTU-R. | |
| 1.3.6.1.4.1.3902.1015.1001.3.11 | NotificationzxAnXdsl2LineXtucLowDataRateTrap | current | zxAnXdsl2XtucLowDataRateTolerance threshold or zxAnXdsl2XtucLowDataRateThresh reached. | |
| 1.3.6.1.4.1.3902.1015.1001.3.12 | NotificationzxAnXdsl2LineXtucLowDataRateClearTrap | current | zxAnXdsl2LineXtucLowDataRateTrap clear. | |
| 1.3.6.1.4.1.3902.1015.1001.3.13 | NotificationzxAnXdsl2LineXturLowDataRateTrap | current | zxAnXdsl2XturLowDataRateTolerance threshold or zxAnXdsl2XturLowDataRateThresh reached. | |
| 1.3.6.1.4.1.3902.1015.1001.3.14 | NotificationzxAnXdsl2LineXturLowDataRateClearTrap | current | zxAnXdsl2LineXturLowDataRateTrap clear. | |
| 1.3.6.1.4.1.3902.1015.1001.3.15 | NotificationzxAnXdsl2DataPathMismatchTrap | current | This trap will be sent to managemet system when configured data path type is different from actual data path type on the interface. | |
| 1.3.6.1.4.1.3902.1015.1001.3.16 | NotificationzxAnXdsl2DataPathMismatchClrTrap | current | zxAnXdsl2DataPathMismatchTrap will be cleared when configured data path type matches actual data path type on the interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ZxAnXdsl2TransmissionModeType | BITS { ansit1413(0), etsi(1), g9921PotsNonOverlapped(2), g9921PotsOverlapped(3), g9921IsdnNonOverlapped(4), g9921isdnOverlapped(5), g9921tcmIsdnNonOverlapped(6), g9921tcmIsdnOverlapped(7), g9922potsNonOverlapeed(8), g9922potsOverlapped(9), g9922tcmIsdnNonOverlapped(10), g9922tcmIsdnOverlapped(11), g9921tcmIsdnSymmetric(12), reserved1(13), reserved2(14), reserved3(15), reserved4(16), reserved5(17), g9923PotsNonOverlapped(18), g9923PotsOverlapped(19), g9923IsdnNonOverlapped(20), g9923isdnOverlapped(21), reserved6(22), reserved7(23), g9924potsNonOverlapeed(24), g9924potsOverlapped(25), reserved8(26), reserved9(27), g9923AnnexIAllDigNonOverlapped(28), g9923AnnexIAllDigOverlapped(29), g9923AnnexJAllDigNonOverlapped(30), g9923AnnexJAllDigOverlapped(31), g9924AnnexIAllDigNonOverlapped(32), g9924AnnexIAllDigOverlapped(33), g9923AnnexLMode1NonOverlapped(34), g9923AnnexLMode2NonOverlapped(35), g9923AnnexLMode3Overlapped(36), g9923AnnexLMode4Overlapped(37), g9923AnnexMPotsNonOverlapped(38), g9923AnnexMPotsOverlapped(39), g9925PotsNonOverlapped(40), g9925PotsOverlapped(41), g9925IsdnNonOverlapped(42), g9925isdnOverlapped(43), reserved10(44), reserved11(45), g9925AnnexIAllDigNonOverlapped(46), g9925AnnexIAllDigOverlapped(47), g9925AnnexJAllDigNonOverlapped(48), g9925AnnexJAllDigOverlapped(49), g9925AnnexMPotsNonOverlapped(50), g9925AnnexMPotsOverlapped(51), reserved12(52), g9932AnnexAProtection(53), g9932AnnexBProtection(54), g9932AnnexCProtection(55), g9932AnnexA(56), g9932AnnexB(57), g9932AnnexC(58), reserved16(59), reserved17(60), g9935AnnexA(61), g9935AnnexB(62), g9935AnnexC(63) } | current | A set of xDSL line transmission modes, with one bit per mode. The notes (F) and (L) denote Full-Rate and Lite/splitterless respectively: Bit 00 : Regional Std. (ANSI T1.413) (F) Bit 01 : Regional Std. (ETSI DTS/TM06006)… |