ZTE-BFD-MIB
87 objects
No module-level DESCRIPTION found.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.3 | Nodezxr10 | |||
| 1.3.6.1.4.1.3902.3.322 | IdentityzteBfdMib | |||
| 1.3.6.1.4.1.3902.3.322.0 | Nodezxr10BfdNotifications | |||
| 1.3.6.1.4.1.3902.3.322.0.1 | Notificationzxr10BfdSessUp | current | This notification is generated when the zxr10BfdSessState object for one or more contiguous entries in zxr10BfdSessTable are about to enter the up(4) state fro… | |
| 1.3.6.1.4.1.3902.3.322.0.2 | Notificationzxr10BfdSessDown | current | This notification is generated when the zxr10BfdSessState object for one or more contiguous entries in zxr10BfdSessTable are about to enter the down(2) or admi… | |
| 1.3.6.1.4.1.3902.3.322.1 | Nodezxr10BfdObjects | |||
| 1.3.6.1.4.1.3902.3.322.1.1 | Nodezxr10BfdScalarObjects | |||
| 1.3.6.1.4.1.3902.3.322.1.1.1 | Scalarzxr10BfdAdminStatus | read-only | current | The global administrative status of BFD in this router. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disabl… |
| 1.3.6.1.4.1.3902.3.322.1.1.2 | Scalarzxr10BfdVersionNumber | read-only | current | The current version number of the BFD protocol. |
| 1.3.6.1.4.1.3902.3.322.1.1.3 | Scalarzxr10BfdSessNotificationsEnable | read-write | current | If this object is set to true(1), then it enables the emission of zxr10BfdSessUp and zxr10BfdSessDown notifications; otherwise these notifications are not emit… |
| 1.3.6.1.4.1.3902.3.322.1.2 | Tablezxr10BfdSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.4.1.3902.3.322.1.2.1 | Rowzxr10BfdSessEntry | not-accessible | current | The BFD Session Entry describes BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.1 | Columnzxr10BfdSessIndex | read-only | current | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.2 | Columnzxr10BfdSessApplicationId | read-only | current | This object contains an index used to indicate a local application which owns or maintains this BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.3 | Columnzxr10BfdSessInitMode | read-only | current | The Init Mode of the BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.4 | Columnzxr10BfdSessDiscriminator | read-only | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.5 | Columnzxr10BfdSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.6 | Columnzxr10BfdSessSrcUdpPort | read-only | current | The source UDP Port for BFD. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.7 | Columnzxr10BfdSessState | read-only | current | The perceived state of the BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.8 | Columnzxr10BfdSessRemoteHeardFlag | read-only | current | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD p… |
| 1.3.6.1.4.1.3902.3.322.1.2.1.9 | Columnzxr10BfdSessDiag | read-only | current | A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.10 | Columnzxr10BfdSessOperMode | read-only | current | This object specifies current operating mode that BFD session is operating in. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.11 | Columnzxr10BfdSessDemandModeDesiredFlag | read-only | current | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fa… |
| 1.3.6.1.4.1.3902.3.322.1.2.1.12 | Columnzxr10BfdSessEchoFuncModeDesiredFlag | read-only | current | This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(… |
| 1.3.6.1.4.1.3902.3.322.1.2.1.13 | Columnzxr10BfdSessControlPlanIndepFlag | read-only | current | This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if … |
| 1.3.6.1.4.1.3902.3.322.1.2.1.14 | Columnzxr10BfdSessAddrType | read-only | current | This object specifies IP address type of the neighboring IP address which is being monitored with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) … |
| 1.3.6.1.4.1.3902.3.322.1.2.1.15 | Columnzxr10BfdSessLocalAddr | read-only | current | This object specifies the local IP address which is being associated with this BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.16 | Columnzxr10BfdSessRemoteAddr | read-only | current | This object specifies the neighboring IP address which is being monitored with this BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.17 | Columnzxr10BfdSessLdpDestAddr | read-only | current | This object specifies the FEC's destination address which is being associated with this LDP LSP BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.18 | Columnzxr10BfdSessLdpPrefixLength | read-only | current | This object specifies the prefix length which is being associated with this LDP LSP BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.19 | Columnzxr10BfdSessRsvpTunnelId | read-only | current | This object specifies the tunnle Id which is being monitored with this RSVP LSP BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.20 | Columnzxr10BfdSessPWPeerAddr | read-only | current | This object specifies the Pseudowire's remote IP address which is being monitored with this PW BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.21 | Columnzxr10BfdSessPWVcId | read-only | current | This object specifies the Pseudowire's Vc-Id which is being monitored with this PW BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.22 | Columnzxr10BfdSessPWVcTtl | read-only | current | This object specifies the Pseudowire's Vc-Ttl which is being monitored with this PW BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.23 | Columnzxr10BfdSessDesiredMinTxInterval | read-only | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.24 | Columnzxr10BfdSessReqMinRxInterval | read-only | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.25 | Columnzxr10BfdSessReqMinEchoRxInterval | read-only | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.26 | Columnzxr10BfdSessDetectMult | read-only | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.27 | Columnzxr10BfdSessHoldTime | read-only | current | This object specifies the Hold time of this BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.28 | Columnzxr10BfdSessAuthPresFlag | read-only | current | This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be aut… |
| 1.3.6.1.4.1.3902.3.322.1.2.1.29 | Columnzxr10BfdSessAuthenticationType | read-only | current | The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set |
| 1.3.6.1.4.1.3902.3.322.1.2.1.30 | Columnzxr10BfdSessVersionNumber | read-only | current | The version number of the BFD protocol that this session is running in. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.31 | Columnzxr10BfdSessType | read-only | current | The type of this BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.32 | Columnzxr10BfdSessInterface | read-only | current | This object contains an interface index used to indicate the interface which this BFD session is running on. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.33 | Columnzxr10BfdSessPWMode | read-only | current | PW mode. |
| 1.3.6.1.4.1.3902.3.322.1.2.1.34 | Columnzxr10BfdSessPWFec129Agi | read-only | current | AGI element group-id value |
| 1.3.6.1.4.1.3902.3.322.1.2.1.35 | Columnzxr10BfdSessPWFec129SaiiGid | read-only | current | SAII element global-id value |
| 1.3.6.1.4.1.3902.3.322.1.2.1.36 | Columnzxr10BfdSessPWFec129SaiiPrefix | read-only | current | SAII element prefix value |
| 1.3.6.1.4.1.3902.3.322.1.2.1.37 | Columnzxr10BfdSessPWFec129TaiiGid | read-only | current | TAII element global-id value |
| 1.3.6.1.4.1.3902.3.322.1.2.1.38 | Columnzxr10BfdSessPWFec129TaiiPrefix | read-only | current | TAII element prefix value |
| 1.3.6.1.4.1.3902.3.322.1.2.1.39 | Columnzxr10BfdSessPWFec129SaiiACId | read-only | current | SAII element AC-id value |
| 1.3.6.1.4.1.3902.3.322.1.2.1.40 | Columnzxr10BfdSessPWFec129TaiiACId | read-only | current | TAII element AC-id value |
| 1.3.6.1.4.1.3902.3.322.1.2.1.41 | Columnzxr10BfdSessPWFecType | read-only | current | This configures PW Fec type, fec128 by default. |
| 1.3.6.1.4.1.3902.3.322.1.3 | Tablezxr10BfdSessPerfTable | not-accessible | current | This table specifies BFD Session performance counters. |
| 1.3.6.1.4.1.3902.3.322.1.3.1 | Rowzxr10BfdSessPerfEntry | not-accessible | current | The BFD Session Entry describes BFD session Performance. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.1 | Columnzxr10BfdSessPerfIndex | read-only | current | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.2 | Columnzxr10BfdSessPerfPktIn | read-only | current | The total number of BFD messages received for this BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.3 | Columnzxr10BfdSessPerfPktOut | read-only | current | The total number of BFD messages sent for this BFD session. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.4 | Columnzxr10BfdSessUpTime | read-only | current | The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.5 | Columnzxr10BfdSessPerfLastCommLostDiag | read-only | current | The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.6 | Columnzxr10BfdSessPerfMinTxInterval | read-only | current | This object specifies the minimum interval, in microseconds, that the local system have transmitting BFD Control packets. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.7 | Columnzxr10BfdSessPerfMaxTxInterval | read-only | current | This object specifies the maximum interval, in microseconds, that the local system have transmitting BFD Control packets. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.8 | Columnzxr10BfdSessPerfAvgTxInterval | read-only | current | This object specifies the average interval, in microseconds, that the local system have transmitting BFD Control packets. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.9 | Columnzxr10BfdSessPerfMinRxInterval | read-only | current | This object specifies the minimum interval, in microseconds, that the local system have recieving BFD Control packets. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.10 | Columnzxr10BfdSessPerfMaxRxInterval | read-only | current | This object specifies the maximum interval, in microseconds, that the local system have recieving BFD Control packets. |
| 1.3.6.1.4.1.3902.3.322.1.3.1.11 | Columnzxr10BfdSessPerfAvgRxInterval | read-only | current | This object specifies the average interval, in microseconds, that the local system have recieving BFD Control packets. |
| 1.3.6.1.4.1.3902.3.322.1.4 | Tablezxr10BfdStaticSessTable | not-accessible | current | The BFD Static Session Config Information Table. |
| 1.3.6.1.4.1.3902.3.322.1.4.1 | Rowzxr10BfdStaticSessConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.322.1.4.1.1 | Columnzxr10BfdStaticSessSerial | read-only | current | |
| 1.3.6.1.4.1.3902.3.322.1.4.1.2 | Columnzxr10BfdStaticSessName | read-only | current | Session name |
| 1.3.6.1.4.1.3902.3.322.1.4.1.3 | Columnzxr10BfdStaticSessBindType | read-only | current | Set bfd type |
| 1.3.6.1.4.1.3902.3.322.1.4.1.4 | Columnzxr10BfdStaticSessPeerIp | read-only | current | BFD peer IPv4 address |
| 1.3.6.1.4.1.3902.3.322.1.4.1.5 | Columnzxr10BfdStaticSessIfDefaultIp | read-only | current | If true(1) Link BFD use default ip as peer IPv4 address |
| 1.3.6.1.4.1.3902.3.322.1.4.1.6 | Columnzxr10BfdStaticSessDefaultIp | read-only | current | BFD default multicast IPv4 address |
| 1.3.6.1.4.1.3902.3.322.1.4.1.7 | Columnzxr10BfdStaticSessSourceIp | read-only | current | BFD source IPv4 address |
| 1.3.6.1.4.1.3902.3.322.1.4.1.8 | Columnzxr10BfdStaticSessInterfaceName | read-only | current | Set Link BFD out interface name |
| 1.3.6.1.4.1.3902.3.322.1.4.1.9 | Columnzxr10BfdStaticSessVrfName | read-only | current | Vrf Name |
| 1.3.6.1.4.1.3902.3.322.1.4.1.10 | Columnzxr10BfdStaticSessLocalDisc | read-only | current | BFD session local discriminator |
| 1.3.6.1.4.1.3902.3.322.1.4.1.11 | Columnzxr10BfdStaticSessRemoteDisc | read-only | current | BFD session remote discriminator |
| 1.3.6.1.4.1.3902.3.322.1.4.1.12 | Columnzxr10BfdStaticSessMult | read-only | current | BFD session detect multiplier |
| 1.3.6.1.4.1.3902.3.322.1.4.1.13 | Columnzxr10BfdStaticSessMinTx | read-only | current | BFD session min transmit packet interval |
| 1.3.6.1.4.1.3902.3.322.1.4.1.14 | Columnzxr10BfdStaticSessMinRx | read-only | current | BFD session min receive packet interval |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| Zxr10BfdDiag | INTEGER { noDiagnostic(1), controlDetectionTimeExpired(2), echoFunctionFailed(3), neighborSignaledSessionDown(4), forwardingPlaneReset(5), pathDown(6), concatenatedPathDown(7), administrativelyDown(8), reverseConcatenatedPathDown(9) } | current | A common BFD diagnostic code. |
| Zxr10BfdInterval | Unsigned32 (1..4294967295 ) | current | The BFD interval delay in microseconds. |
| Zxr10BfdSessIndexTC | Unsigned32 (1..4294967295 ) | current | An index used to uniquely identify BFD sessions. |