ZTE-DSL-IMA-MIB
41 objects
This MIB defines managed objects of DSL IMA mgmt.
Imported Objects
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.1004 | NodezxDsl | |||
| 1.3.6.1.4.1.3902.1004.30 | IdentityzxDslImaMib | This MIB defines managed objects of DSL IMA mgmt. | ||
| 1.3.6.1.4.1.3902.1004.30.1 | TablezxDslImaGroupTable | not-accessible | current | xDslImaGroup interface table. |
| 1.3.6.1.4.1.3902.1004.30.1.1 | RowzxDslImaGroupEntry | not-accessible | current | Ima Group interface create entry.It is used to create or remove a ima goup interface. NOTE: zxDslImaLinkGroupIfIndex of zxDslImaLinkTable MUST be set before cr… |
| 1.3.6.1.4.1.3902.1004.30.1.1.1 | ColumnzxDslImaGroupIfIndex | not-accessible | current | A unique value for the IMA Group. |
| 1.3.6.1.4.1.3902.1004.30.1.1.2 | ColumnzxDslImaGroupConfImaVersion | read-create | current | The configured version of Group,ima 1.0 or ima 1.1 . |
| 1.3.6.1.4.1.3902.1004.30.1.1.3 | ColumnzxDslImaGroupActualImaVersion | read-create | current | The actual version of Group,ima 1.0 or ima 1.1 . |
| 1.3.6.1.4.1.3902.1004.30.1.1.4 | ColumnzxDslImaGroupSymmetry | read-create | current | Symmetry of the IMA group. |
| 1.3.6.1.4.1.3902.1004.30.1.1.5 | ColumnzxDslImaGroupM2SClkMode | read-create | current | The clock mode of master to slave for the Group |
| 1.3.6.1.4.1.3902.1004.30.1.1.6 | ColumnzxDslImaGroupNeTxClkMode | read-create | current | Transmit clocking mode used by the near-end IMA group. |
| 1.3.6.1.4.1.3902.1004.30.1.1.7 | ColumnzxDslImaGroupFeTxClkMode | read-only | current | Transmit clocking mode used by the far-end IMA group. |
| 1.3.6.1.4.1.3902.1004.30.1.1.8 | ColumnzxDslImaGroupTxFrameLength | read-create | current | The frame length to be used by the IMA group in the transmit direction. |
| 1.3.6.1.4.1.3902.1004.30.1.1.9 | ColumnzxDslImaGroupRxFrameLength | read-only | current | The frame length to be used by the IMA group in the recieving direction. |
| 1.3.6.1.4.1.3902.1004.30.1.1.10 | ColumnzxDslImaGroupAdminStatus | read-create | current | Administrative status of IMA group. When it is set to reset(3),the agent should reset this IMA group and then set it to its previous status. |
| 1.3.6.1.4.1.3902.1004.30.1.1.11 | ColumnzxDslImaGroupOperstatus | read-only | current | Operational status of IMA group. |
| 1.3.6.1.4.1.3902.1004.30.1.1.12 | ColumnzxDslImaGroupNeState | read-only | current | The current operational state of the near-end IMA Group. |
| 1.3.6.1.4.1.3902.1004.30.1.1.13 | ColumnzxDslImaGroupFeState | read-only | current | The current operational state of the far-end IMA Group. |
| 1.3.6.1.4.1.3902.1004.30.1.1.14 | ColumnzxDslImaGroupDsx1LineType | read-create | current | This variable indicates the variety of E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reason… |
| 1.3.6.1.4.1.3902.1004.30.1.1.15 | ColumnzxDslImaGroupDsx1LineCoding | read-create | current | This variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteristics. e1AMI(3) refers to a mod… |
| 1.3.6.1.4.1.3902.1004.30.1.1.16 | ColumnzxDslImaGroupDsx1TxClockSource | read-create | current | The source of the transmit clock. rxTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTiming(2) indicates that a local s… |
| 1.3.6.1.4.1.3902.1004.30.1.1.17 | ColumnzxDslImaGroupDsx1IdleCells | read-create | current | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum, Unassigned cells should be se… |
| 1.3.6.1.4.1.3902.1004.30.1.1.18 | ColumnzxDslImaGroupDsx1RxScrambling | read-create | current | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting side. |
| 1.3.6.1.4.1.3902.1004.30.1.1.19 | ColumnzxDslImaGroupDsx1TxScrambling | read-create | current | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the same as the receiving side. |
| 1.3.6.1.4.1.3902.1004.30.1.1.20 | ColumnzxDslImaGroupRowStatus | read-create | current | This object is used to create, delete the ima group interface in this table. |
| 1.3.6.1.4.1.3902.1004.30.2 | TablezxDslImaLinkTable | not-accessible | current | xDsl zxDslImaLink interface table. |
| 1.3.6.1.4.1.3902.1004.30.2.1 | RowzxDslImaLinkEntry | not-accessible | current | Ima link interface create entry.It is used to create or remove a ima link interface. |
| 1.3.6.1.4.1.3902.1004.30.2.1.1 | ColumnzxDslImaSlot | not-accessible | current | A slot for the IMA card. |
| 1.3.6.1.4.1.3902.1004.30.2.1.2 | ColumnzxDslImaLinkId | not-accessible | current | A unique value for the IMA port on this card. |
| 1.3.6.1.4.1.3902.1004.30.2.1.3 | ColumnzxDslImaLinkGroupIfIndex | read-write | current | The IMA group ifindex that this link joined.If the link does'nt join any ima group,this value is 0. |
| 1.3.6.1.4.1.3902.1004.30.2.1.4 | ColumnzxDslImaLinkNeTxAdminStatus | read-write | current | The administrative status of IMA link near-end transmission. |
| 1.3.6.1.4.1.3902.1004.30.2.1.5 | ColumnzxDslImaLinkNeRxAdminStatus | read-write | current | The administrative status of IMA link near-end reciveing. |
| 1.3.6.1.4.1.3902.1004.30.2.1.8 | ColumnzxDslImaLinkNeRxState | read-only | current | The current state of the near-end receive link. |
| 1.3.6.1.4.1.3902.1004.30.2.1.9 | ColumnzxDslImaLinkNeTxState | read-only | current | The current state of the near-end transmit link. |
| 1.3.6.1.4.1.3902.1004.30.2.1.10 | ColumnzxDslImaLinkFeRxState | read-only | current | The current state of the far-end receive link. |
| 1.3.6.1.4.1.3902.1004.30.2.1.11 | ColumnzxDslImaLinkFeTxState | read-only | current | The current state of the far-end transmit link. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ImaFrameLength | INTEGER { m32(32), m64(64), m128(128), m256(256) } | current | Length of the IMA frames. |
| ImaGroupState | INTEGER { notConfigured(1), startUp(2), startUpAck(3), configAbortUnsupportedM(4), configAbortIncompatibleSymmetry(5), configAbortOther(6), insufficientLinks(7), blocked(8), operational(9), configAbortUnsupportedImaVersion(10) } | current | State of the IMA group. |
| ImaGroupSymmetry | INTEGER { symmetricOperation(1), asymmetricOperation(2), asymmetricConfiguration(3) } | current | The group symmetry mode adjusted during the group start-up. |
| ImaGroupTxClkMode | INTEGER { ctc(1), itc(2) } | current | Indicate the transmit clock mode of the IMA group. There are two possible modes: the Common Transmit Clock (CTC) and the Independent Transmit Clock (ITC). The CTC mode corresponds to the case when the transmit clock of … |
| ImaLinkState | INTEGER { notInGroup(1), unusableNoGivenReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) } | current | State of a link belonging to an IMA group. |