ZTE-DSL-LINE-EXT-MIB
128 objects
No module-level DESCRIPTION found.
Imported Objects
| ADSL-LINE-MIB | adslLineAlarmConfProfileEntry adslLineConfProfileEntry adslLineConfProfileName |
| IF-MIB | ifIndex |
| RFC1155-SMI | enterprises |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.1004 | NodezxDsl | |||
| 1.3.6.1.4.1.3902.1004.4 | IdentityzxAdslExtMib | |||
| 1.3.6.1.4.1.3902.1004.4.1 | NodezxAdslExtMibObjects | |||
| 1.3.6.1.4.1.3902.1004.4.1.1 | TablezxAdslLineTable | not-accessible | current | Adsl line additional information table. |
| 1.3.6.1.4.1.3902.1004.4.1.1.1 | RowzxAdslLineEntry | not-accessible | current | Adsl line additional information entry |
| 1.3.6.1.4.1.3902.1004.4.1.1.1.1 | ColumnzxAdslLinePMConfPMSF | read-create | current | This configuration parameter defines the line states to be forced by the near-end ATU on this line. It is coded as an integer value with following definition: … |
| 1.3.6.1.4.1.3902.1004.4.1.1.1.2 | ColumnzxAdslLinePMState | read-only | current | The Line has four possible power management states, numbered 0 to 3 and corresponding to respectively: L0 - Synchronized - This Line state (L0) is when the Lin… |
| 1.3.6.1.4.1.3902.1004.4.1.1.1.3 | ColumnzxAdslLineDMTTrellis | read-only | deprecated | Parameter that indicates whether trellis coding has been enabled or disabled.Trellis coding should always be enabled for its clear performancen advantage.Trell… |
| 1.3.6.1.4.1.3902.1004.4.1.1.1.4 | ColumnzxAdslLineTxAtmCells | read-only | current | Transmitted ATM cell counter.This is a count of total data cells only transmitted by ATU-C. |
| 1.3.6.1.4.1.3902.1004.4.1.1.1.5 | ColumnzxAdslLineRxAtmCells | read-only | current | Received ATM cell counter.This is a count of total data cells only received by ATU-C. |
| 1.3.6.1.4.1.3902.1004.4.1.1.1.6 | ColumnzxAdslLineIdleCells | read-only | current | Number of idle cells transmitted/recieved by ATU-C. |
| 1.3.6.1.4.1.3902.1004.4.1.1.1.7 | ColumnzxAdslLineTxDataRate | read-only | current | Transmitted net data rate on this line. |
| 1.3.6.1.4.1.3902.1004.4.1.1.1.8 | ColumnzxAdslLineRxDataRate | read-only | current | Recieved net data rate on this line. |
| 1.3.6.1.4.1.3902.1004.4.1.2 | TablezxAdslLineConfProfileExtTable | not-accessible | current | Adsl line config profile extended information table. |
| 1.3.6.1.4.1.3902.1004.4.1.2.1 | RowzxAdslLineConfProfileExtEntry | not-accessible | current | An entry extends the adslLineConfProfileEntry defined in [RFC2662]. Each entry corresponds to an ADSL line profile. |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.1 | ColumnzxAdslLineDMTConfTrellis | read-create | deprecated | Parameter that enable or disable trellis coding. Trellis coding should always be enabled for its clear performancen advantage. Trellis coding is mandatory for … |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.2 | ColumnzxAdslAtucConfMaxBitsPerBin | read-create | current | Specifies maximum Rx number of bits per bin. |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.3 | ColumnzxAdslAtucConfTxStartBin | read-create | current | Specifies lowest bin number allowed for Tx signal. Different line coding type has different default value. 0x20 (default for Annex A only) 0x20 (default for AD… |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.4 | ColumnzxAdslAtucConfTxEndBin | read-create | current | Specifies highest bin number allowed for Tx signal. Default = 0x3ff (default for all Annexes and ADSL2/ADSL2plus) |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.5 | ColumnzxAdslAtucConfRxStartBin | read-create | current | Specifies lowest bin number allowed for Rx signal. Different line coding type has different default value. 0x06 (default for Annex A) 0x01 (default for Annex B… |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.6 | ColumnzxAdslAtucConfRxEndBin | read-create | current | Specifies highest bin number allowed for Rx signal. Default = 0x3f (default for all Annexes and ADSL2/ADLS2plus) |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.7 | ColumnzxAdslAtucConfUseCustomBins | read-create | current | Enable or disable custom bin selection for upstream/downstream transmission. This parameter is used in conjunction with the adslAtucDMTConfFreqBins and adslAtu… |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.8 | ColumnzxAdslAtucConfDnBitSwap | read-create | current | enables/disables downstream bit swapping. Different line coding type has different default value. disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C C.x… |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.9 | ColumnzxAdslAtucConfUpBitSwap | read-create | current | enables/disables upstream bit swapping. Different line coding type has different default value. disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C C.x, … |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.10 | ColumnzxAdslAtucConfREADSL2Enable | read-create | deprecated | Defines whether downstream READSL2 operation should be forced by the ATU-C. |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.11 | ColumnzxAdslAtucConfPsdMaskType | read-create | current | It is supported by G.Span. Dsl card team will provide files about it in details. |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.12 | ColumnzxAdslAtucConfPMMode | read-create | current | This configuration parameter defines the line states the ATU-C may autonomously transition to on this line. It is coded in a bit map representation (0 if not a… |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.13 | ColumnzxAdslAtucConfPML0Time | read-create | current | PM configuration parameter,related to the L2 low power state. This parameter represents the minimum time between an exit from the L2 state and the next entry i… |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.14 | ColumnzxAdslAtucConfPML2Time | read-create | current | PM configuration parameter,related to the L2 low power state. This parameter represents the minimum time between an entry into the L2 state and the first Power… |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.15 | ColumnzxAdslAtucConfPML2ATPR | read-create | current | PM configuration parameter,related to the L2 low power state. This parameter represents the Maximum Aggregate Transmit Power Reduction (in dB) that can be perf… |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.16 | ColumnzxAdslAtucConfPML2Rate | read-create | current | PM configuration parameter,related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.20 | ColumnzxAdsl2ConfMinProtectionDs | read-create | current | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can … |
| 1.3.6.1.4.1.3902.1004.4.1.2.1.21 | ColumnzxAdsl2ConfMinProtectionUs | read-create | current | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. |
| 1.3.6.1.4.1.3902.1004.4.1.3 | TablezxAdslAtucPhysTable | not-accessible | current | This table provides one row for each ATUC Each row contains the Physical Layer Parameters table for that ATUC. ADSL physical interfaces are those ifEntries whe… |
| 1.3.6.1.4.1.3902.1004.4.1.3.1 | RowzxAdslAtucPhysEntry | not-accessible | current | Adsl physical layer line actuals information entry |
| 1.3.6.1.4.1.3902.1004.4.1.3.1.1 | ColumnzxAdslAtucPrevSnrMgn | read-only | current | The adslAtucCurrSnrMgn at the time of the last linkup event. |
| 1.3.6.1.4.1.3902.1004.4.1.3.1.2 | ColumnzxAdslAtucPrevAtn | read-only | current | The adslAtucCurrAtn at the time of the last linkup event. |
| 1.3.6.1.4.1.3902.1004.4.1.3.1.3 | ColumnzxAdslAtucPrevAttainableRate | read-only | current | The adslAtucCurrAttainableRate at the time of the last linkup event. |
| 1.3.6.1.4.1.3902.1004.4.1.3.1.4 | ColumnzxAdslAtucChipVersion | read-only | deprecated | The atuc chip version number. |
| 1.3.6.1.4.1.3902.1004.4.1.4 | TablezxAdslAturPhysTable | not-accessible | current | This table provides one row for each ATUR Each row contains the Physical Layer Parameters table for that ATUR. ADSL physical interfaces are those ifEntries whe… |
| 1.3.6.1.4.1.3902.1004.4.1.4.1 | RowzxAdslAturPhysEntry | not-accessible | current | Adsl physical layer line actuals information entry |
| 1.3.6.1.4.1.3902.1004.4.1.4.1.1 | ColumnzxAdslAturPrevSnrMgn | read-only | current | The adslAturCurrSnrMgn at the time of the last linkup event. |
| 1.3.6.1.4.1.3902.1004.4.1.4.1.2 | ColumnzxAdslAturPrevAtn | read-only | current | The adslAturCurrAtn at the time of the last linkup event. |
| 1.3.6.1.4.1.3902.1004.4.1.4.1.3 | ColumnzxAdslAturPrevAttainableRate | read-only | current | The adslAturCurrAttainableRate at the time of the last linkup event. |
| 1.3.6.1.4.1.3902.1004.4.1.5 | TablezxAdslAtucChanTable | not-accessible | current | This table provides one row for each Atuc channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.4.1.3902.1004.4.1.5.1 | RowzxAdslAtucChanEntry | not-accessible | current | Adsl channel layer line actuals information entry |
| 1.3.6.1.4.1.3902.1004.4.1.5.1.1 | ColumnzxAdslAtucChanRsSymbols | read-only | current | The number of DMT symbols per ReedSolomon code word (S) in the upstream direction. Note that S is not restricted to interleaved mode only. This parameter is ca… |
| 1.3.6.1.4.1.3902.1004.4.1.5.1.2 | ColumnzxAdslAtucChanRsDepth | read-only | current | This parameter indicates interleaving depth (D) in the upstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a va… |
| 1.3.6.1.4.1.3902.1004.4.1.5.1.3 | ColumnzxAdslAtucChanRsRedundancy | read-only | current | The number of redundant bytes (R) per Reed-Solomon code in the upstream direction. |
| 1.3.6.1.4.1.3902.1004.4.1.6 | TablezxAdslAturChanTable | not-accessible | current | This table provides one row for each ATUR channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.4.1.3902.1004.4.1.6.1 | RowzxAdslAturChanEntry | not-accessible | current | Adsl channel layer line actuals information entry |
| 1.3.6.1.4.1.3902.1004.4.1.6.1.1 | ColumnzxAdslAturChanRsSymbols | read-only | current | The number of DMT symbols per ReedSolomon code word (S) in the upstream direction. Note that S is not restricted to interleaved mode only. This parameter is ca… |
| 1.3.6.1.4.1.3902.1004.4.1.6.1.2 | ColumnzxAdslAturChanRsDepth | read-only | current | This parameter indicates interleaving depth (D) in the upstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a va… |
| 1.3.6.1.4.1.3902.1004.4.1.6.1.3 | ColumnzxAdslAturChanRsRedundancy | read-only | current | The number of redundant bytes (R) per Reed-Solomon code in the upstream direction. |
| 1.3.6.1.4.1.3902.1004.4.1.7 | TablezxAdslAtucChanPerfTable | not-accessible | current | This table provides one row for each Atuc channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.4.1.3902.1004.4.1.7.1 | RowzxAdslAtucChanPerfEntry | not-accessible | current | DMT channel layer line actuals information entry |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.1 | ColumnzxAdslAtucChanPerfNcd | read-only | current | Count of no cell delineation (ncd) on this channel. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.2 | ColumnzxAdslAtucChanPerfOcd | read-only | current | Count of out of cell delineation (ocd) on this channel. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.3 | ColumnzxAdslAtucChanPerfHec | read-only | current | Header error check counter (hec) on this channel. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.4 | ColumnzxAdslAtucChanPerfCurr15Ncd | read-only | current | Count of no cell delineation (ncd) on this channel within the current 15 minute time interval. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.5 | ColumnzxAdslAtucChanPerfCurr15Ocd | read-only | current | Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.6 | ColumnzxAdslAtucChanPerfCurr15Hec | read-only | current | Header error check counter (hec) on this channel within the current 15 minute time interval. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.7 | ColumnzxAdslAtucChanPerfCurr1DayNcd | read-only | current | Count of no cell delineation (ncd) on this channel within the current 1 day interval. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.8 | ColumnzxAdslAtucChanPerfCurr1DayOcd | read-only | current | Count of out of cell delineation (ocd) on this channel within the current 1 day interval. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.9 | ColumnzxAdslAtucChanPerfCurr1DayHec | read-only | current | Header error check counter (hec) on this channel within the current 1 day interval |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.10 | ColumnzxAdslAtucChanPerfPrev1DayNcd | read-only | current | Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.11 | ColumnzxAdslAtucChanPerfPrev1DayOcd | read-only | current | Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.3902.1004.4.1.7.1.12 | ColumnzxAdslAtucChanPerfPrev1DayHec | read-only | current | Header error check counter (hec) on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.3902.1004.4.1.8 | TablezxAdslAturChanPerfTable | not-accessible | current | This table provides one row for each Atur channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.4.1.3902.1004.4.1.8.1 | RowzxAdslAturChanPerfEntry | not-accessible | current | DMT channel layer line actuals information entry |
| 1.3.6.1.4.1.3902.1004.4.1.8.1.1 | ColumnzxAdslAturChanPerfNcd | read-only | current | Count of no cell delineation (ncd) on this channel. |
| 1.3.6.1.4.1.3902.1004.4.1.8.1.2 | ColumnzxAdslAturChanPerfHec | read-only | current | Header error check counter (hec) on this channel. |
| 1.3.6.1.4.1.3902.1004.4.1.8.1.3 | ColumnzxAdslAturChanPerfCurr15Ncd | read-only | current | Count of no cell delineation (ncd) on this channel within the current 15 minute time interval. |
| 1.3.6.1.4.1.3902.1004.4.1.8.1.4 | ColumnzxAdslAturChanPerfCurr15Hec | read-only | current | Header error check counter (hec) on this channel within the current 15 minute time interval |
| 1.3.6.1.4.1.3902.1004.4.1.8.1.5 | ColumnzxAdslAturChanPerfCurr1DayNcd | read-only | current | Count of no cell delineation (ncd) on this channel within the current 1 day interval. |
| 1.3.6.1.4.1.3902.1004.4.1.8.1.6 | ColumnzxAdslAturChanPerfCurr1DayHec | read-only | current | Header error check counter (hec) on this channel within the current 1 day interval |
| 1.3.6.1.4.1.3902.1004.4.1.8.1.7 | ColumnzxAdslAturChanPerfPrev1DayNcd | read-only | current | Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.3902.1004.4.1.8.1.8 | ColumnzxAdslAturChanPerfPrev1DayHec | read-only | current | Header error check counter (hec) on this channel within the most recent previous 1-day period. |
| 1.3.6.1.4.1.3902.1004.4.1.9 | TablezxDslLoopTestTable | not-accessible | current | This table provides one row for each DSL line tesing. |
| 1.3.6.1.4.1.3902.1004.4.1.9.1 | RowzxDslLoopTestEntry | not-accessible | current | DSL line tesing information entry |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.1 | ColumnzxDslLoopTestPort | not-accessible | current | Dsl port number.It should be equal to ifIndex in DSL layer. |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.2 | ColumnzxDslLoopTestType | read-create | current | This is loop test action expected. |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.3 | ColumnzxDslLoopTestOperStatus | read-only | current | This is loop test operational status. Note: if zxDslLoopTestOperStatus equal to Excuting(1), ifOperStaus should be tesing(3). |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.4 | ColumnzxDslLoopTestResult | read-only | current | This is loop test result and includes reasons for test failures. |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.5 | ColumnzxDslLoopTestConfParam1 | read-create | current | Configuration param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. For DSL8220v2.x: zxDslLoopTestTy… |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.6 | ColumnzxDslLoopTestConfParam2 | read-create | current | Configuration param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. No looptest uses this param now. |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.7 | ColumnzxDslLoopTestConfParam3 | read-create | current | Configuration param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. No looptest uses this param now. |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.8 | ColumnzxDslLoopTestConfParam4 | read-create | current | Configuration param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. No looptest uses this param now. |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.9 | ColumnzxDslLoopTestConfParam5 | read-create | current | Configuration param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. No looptest uses this param now. |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.10 | ColumnzxDslLoopTestResultParam1 | read-only | current | Loop test result param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. For DSL8220v2.x: zxDslLoopTes… |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.11 | ColumnzxDslLoopTestResultParam2 | read-only | current | Loop test result param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. No looptest uses this param n… |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.12 | ColumnzxDslLoopTestResultParam3 | read-only | current | Loop test result param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. No looptest uses this param n… |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.13 | ColumnzxDslLoopTestResultParam4 | read-only | current | Loop test result param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. No looptest uses this param n… |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.14 | ColumnzxDslLoopTestResultParam5 | read-only | current | Loop test result param for some looptest.Its definition may be deferent according to the zxDslLoopTestType value and device type. No looptest uses this param n… |
| 1.3.6.1.4.1.3902.1004.4.1.9.1.15 | ColumnzxDslLoopTestRowStatus | read-create | current | Loop test table RowStatus . |
| 1.3.6.1.4.1.3902.1004.4.1.11 | ScalarzxAdslIsSupportAdsl2Plus | read-only | current | A flag is to indicate whether this device is support Adsl2Plus management. |
| 1.3.6.1.4.1.3902.1004.4.1.14 | ScalarzxAdslIsSupportAdslRateThresh | read-only | current | A flag is to indicate whether this device is support dsl connection rate threshold management. |
| 1.3.6.1.4.1.3902.1004.4.1.20 | TablezxAdslLineAlarmConfProfileExtTable | not-accessible | current | Adsl line alarm config profile extended information table. The cycle of thresholds monitoring shoul be less than 5 minutes. |
| 1.3.6.1.4.1.3902.1004.4.1.20.1 | RowzxAdslLineAlarmConfProfileExtEntry | not-accessible | current | An entry extends the adslLineAlarmConfProfileEntry defined in [RFC2662]. Each entry corresponds to an ADSL line alarm profile. |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.1 | ColumnzxAdslAtucConnRateTolerance | read-create | current | Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and actual adslAtucChanCurrTxRate. Calculation: 100*(adslAtucChanConfInterleaveMaxTxRate - ads… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.2 | ColumnzxAdslAturConnRateTolerance | read-create | current | Tolerance between configured adslAturChanConfInterleaveMaxTxRate and actual adslAturChanCurrTxRate. Calculation: 100*(adslAturChanConfInterleaveMaxTxRate - ads… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.3 | ColumnzxAdslThreshAtucConnRate | read-create | current | Threshold of Atuc connection rate. If adslAtucChanCurrTxRate is lower than zxAdslThreshAtucConnRate, zxAdslAtucConnRateOverThreshTrap trap will be sent. A valu… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.4 | ColumnzxAdslThreshAturConnRate | read-create | current | Threshold of Atur connection rate. If adslAturChanCurrTxRate is lower than zxAdslThreshAturConnRate, zxAdslAturConnRateOverThreshTrap trap will be sent. A valu… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.5 | ColumnzxAdslThreshAtucBandwidthUtil | read-create | current | Threshold of Atuc bandwidth utilization. Calculation: Delta(ifOutOctets)*8*1024*100 Atuc Utilization = (time interval)*adslAtucChanConfInterleaveMaxTxRate wher… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.6 | ColumnzxAdslThreshAturBandwidthUtil | read-create | current | Threshold of Atur bandwidth utilization. Calculation: Delta(ifInOctets)*8*1024*100 Atur Utilization = (time interval)*adslAturChanConfInterleaveMaxTxRate where… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.7 | ColumnzxAdslThreshAtucPacketLossRate | read-create | current | The percentage of lost packets to total packets received on the Atuc interface. Calculation: ifOutDiscards*100 Atuc PacketLossRate = ifOutUcastPkts+ifOutMultic… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.8 | ColumnzxAdslThreshAturPacketLossRate | read-create | current | The percentage of lost packets to total packets received on the Atur interface. Calculation: ifInDiscards*100 Atur PacketLossRate = ifInUcastPkts+ifInMulticast… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.9 | ColumnzxAdslThreshAtucBlockErrorRate | read-create | current | The percentage of adslAtucChanUncorrectBlks to adslAtucChanReceivedBlks on the Atuc interface. If this threshold is across, zxAdslAtucBlockErrorRateOverThreshT… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.10 | ColumnzxAdslThreshAturBlockErrorRate | read-create | current | The percentage of adslAturChanUncorrectBlks to adslAturChanReceivedBlks on the Atur interface. If this threshold is across, zxAdslAturBlockErrorRateOverThreshT… |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.11 | ColumnzxAdslThreshReservedMetric1 | read-create | current | reserved threshold. A value of `0' will disable the trap. |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.12 | ColumnzxAdslThreshReservedMetric2 | read-create | current | reserved threshold. A value of `0' will disable the trap. |
| 1.3.6.1.4.1.3902.1004.4.1.20.1.13 | ColumnzxAdslThreshReservedMetric3 | read-create | current | reserved threshold. A value of `0' will disable the trap. |
| 1.3.6.1.4.1.3902.1004.4.2 | NodezxAdslExtTraps | |||
| 1.3.6.1.4.1.3902.1004.4.2.1 | NotificationzxAdslAtuxConnRateOverThreshTrap | current | zxAdslAtucConnRateTolerance threshold or zxAdslThreshAtucConnRate reached. | |
| 1.3.6.1.4.1.3902.1004.4.2.2 | NotificationzxAdslAtuxConnRateUnderThreshTrap | current | AtucConnRate Difference is below threshold of zxAdslAtucConnRateTolerance. Or adslAtucChanCurrTxRate is below threshold of zxAdslThreshAtucConnRate. | |
| 1.3.6.1.4.1.3902.1004.4.2.5 | NotificationzxAdslAtucBandwidthUtilOverThreshTrap | current | zxAdslThreshAtucBandwidthUtil threshold reached. | |
| 1.3.6.1.4.1.3902.1004.4.2.6 | NotificationzxAdslAtucBandwidthUtilUnderThreshTrap | current | Atuc BandwidthUtil is below threshold of zxAdslThreshAtucBandwidthUtil. | |
| 1.3.6.1.4.1.3902.1004.4.2.7 | NotificationzxAdslAturBandwidthUtilOverThreshTrap | current | zxAdslThreshAturBandwidthUtil threshold reached. | |
| 1.3.6.1.4.1.3902.1004.4.2.8 | NotificationzxAdslAturBandwidthUtilUnderThreshTrap | current | Atur BandwidthUtil is below threshold of zxAdslThreshAturBandwidthUtil. | |
| 1.3.6.1.4.1.3902.1004.4.2.9 | NotificationzxAdslAtucPacketLossRateOverThreshTrap | current | zxAdslThreshAtucPacketLossRate threshold reached. | |
| 1.3.6.1.4.1.3902.1004.4.2.10 | NotificationzxAdslAtucPacketLossRateUnderThreshTrap | current | Atuc PacketLossRate is below threshold of zxAdslThreshAtucPacketLossRate. | |
| 1.3.6.1.4.1.3902.1004.4.2.11 | NotificationzxAdslAturPacketLossRateOverThreshTrap | current | zxAdslThreshAturPacketLossRate threshold reached. | |
| 1.3.6.1.4.1.3902.1004.4.2.12 | NotificationzxAdslAturPacketLossRateUnderThreshTrap | current | Atur PacketLossRate is below threshold of zxAdslThreshAturPacketLossRate. | |
| 1.3.6.1.4.1.3902.1004.4.2.13 | NotificationzxAdslAtucBlockErrorRateOverThreshTrap | current | zxAdslThreshAtucBlockErrorRate threshold reached. | |
| 1.3.6.1.4.1.3902.1004.4.2.14 | NotificationzxAdslAtucBlockErrorRateUnderThreshTrap | current | Atuc BlockErrorRate is below threshold of zxAdslThreshAtucBlockErrorRate. | |
| 1.3.6.1.4.1.3902.1004.4.2.15 | NotificationzxAdslAturBlockErrorRateOverThreshTrap | current | zxAdslThreshAturBlockErrorRate threshold reached. | |
| 1.3.6.1.4.1.3902.1004.4.2.16 | NotificationzxAdslAturBlockErrorRateUnderThreshTrap | current | Atur BlockErrorRate is below threshold of zxAdslThreshAturBlockErrorRate. |