ZTE-DSL-SYSCTRL-MIB
365 objects
This MIB defines zte dsl managed objects.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1004.3 | IdentityzxDslSysctrlMib | This MIB defines zte dsl managed objects. | ||
| 1.3.6.1.4.1.3902.1004.3.1 | NodezxDslSysctrlObjects | |||
| 1.3.6.1.4.1.3902.1004.3.1.1 | NodezxDslPhysical | |||
| 1.3.6.1.4.1.3902.1004.3.1.1.1 | TablezxDslRackTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifE… |
| 1.3.6.1.4.1.3902.1004.3.1.1.1.1 | RowzxDslRackEntry | not-accessible | current | An entry in zxDslRackTable. |
| 1.3.6.1.4.1.3902.1004.3.1.1.1.1.1 | ColumnzxDslRackNo | not-accessible | current | :i |
| 1.3.6.1.4.1.3902.1004.3.1.1.1.1.2 | ColumnzxDslRackType | read-create | current | :z |
| 1.3.6.1.4.1.3902.1004.3.1.1.1.1.3 | ColumnzxDslRackMaxShelfNum | read-only | current | ,:? 'O:Fp |
| 1.3.6.1.4.1.3902.1004.3.1.1.1.1.4 | ColumnzxDslRackRowStatus | read-create | current | insert,delete |
| 1.3.6.1.4.1.3902.1004.3.1.1.2 | TablezxDslShelfTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifE… |
| 1.3.6.1.4.1.3902.1004.3.1.1.2.1 | RowzxDslShelfEntry | not-accessible | current | An entry in zxDslShelfTable. |
| 1.3.6.1.4.1.3902.1004.3.1.1.2.1.1 | ColumnzxDslShelfRackNo | not-accessible | current | Rack no. |
| 1.3.6.1.4.1.3902.1004.3.1.1.2.1.2 | ColumnzxDslShelfNo | not-accessible | current | Shelf no. |
| 1.3.6.1.4.1.3902.1004.3.1.1.2.1.3 | ColumnzxDslShelfType | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.1.2.1.4 | ColumnzxDslShelfMaxSlotNum | read-only | current | Max Slot Number in a shelf. |
| 1.3.6.1.4.1.3902.1004.3.1.1.2.1.5 | ColumnzxDslShelfInvSn | read-create | current | This MIB is defined for serial number of this shelf. it is used by inventroy management. |
| 1.3.6.1.4.1.3902.1004.3.1.1.2.1.6 | ColumnzxDslShelfCleiCode | read-only | current | This MIB is defined for CLEI code of this card. it is used by inventroy management.Pls reference http://www.commonlanguage.com to get knowledge about CLEI code. |
| 1.3.6.1.4.1.3902.1004.3.1.1.2.1.15 | ColumnzxDslShelfRowStatus | read-create | current | insert,delete |
| 1.3.6.1.4.1.3902.1004.3.1.1.3 | TablezxDslBoardConfigTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifE… |
| 1.3.6.1.4.1.3902.1004.3.1.1.3.1 | RowzxDslBoardConfigEntry | not-accessible | current | An entry in zxDslBoardConfigTable. |
| 1.3.6.1.4.1.3902.1004.3.1.1.3.1.1 | ColumnzxDslBoardConfigRackNo | not-accessible | current | |
| 1.3.6.1.4.1.3902.1004.3.1.1.3.1.2 | ColumnzxDslBoardConfigShelfNo | not-accessible | current | |
| 1.3.6.1.4.1.3902.1004.3.1.1.3.1.3 | ColumnzxDslBoardConfigSlotNo | not-accessible | current | |
| 1.3.6.1.4.1.3902.1004.3.1.1.3.1.4 | ColumnzxDslBoardConfigSubType | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.1.3.1.5 | ColumnzxDslBoardConfigBaseType | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.1.3.1.6 | ColumnzxDslBoardConfigHardVerType | read-create | current | This is used to configure linecard supporting 8220V1.X version or 8220V2.X version and ADSL1 or ADSL2 |
| 1.3.6.1.4.1.3902.1004.3.1.1.3.1.7 | ColumnzxDslBoardConfigRowStatus | read-create | current | insert,delete |
| 1.3.6.1.4.1.3902.1004.3.1.1.4 | TablezxDslSplitBoardTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifE… |
| 1.3.6.1.4.1.3902.1004.3.1.1.4.1 | RowzxDslSplitBoardEntry | not-accessible | current | An entry in zxDslSplitBoardTable. |
| 1.3.6.1.4.1.3902.1004.3.1.1.4.1.1 | ColumnzxDslSplitBoardRackNo | not-accessible | current | rack number |
| 1.3.6.1.4.1.3902.1004.3.1.1.4.1.2 | ColumnzxDslSplitBoardShelfNo | not-accessible | current | shelf number |
| 1.3.6.1.4.1.3902.1004.3.1.1.4.1.3 | ColumnzxDslSplitBoardSlotNo | not-accessible | current | slot number |
| 1.3.6.1.4.1.3902.1004.3.1.1.4.1.4 | ColumnzxDslSplitBoardPos | read-write | current | splitter board position 1 == SelfRack, 2 == SplitterRack 0 == NULL |
| 1.3.6.1.4.1.3902.1004.3.1.1.4.1.5 | ColumnzxDslSplitBoardStatus | read-write | current | splitter board status |
| 1.3.6.1.4.1.3902.1004.3.1.1.5 | TablezxDslSubBoardTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifE… |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1 | RowzxDslSubBoardEntry | not-accessible | current | An entry in zxDslSubBoardTable. |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.1 | ColumnzxDslSubBoardRackNo | not-accessible | current | rack number |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.2 | ColumnzxDslSubBoardShelfNo | not-accessible | current | shelf number |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.3 | ColumnzxDslSubBoardSlotNo | not-accessible | current | slot number |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.4 | ColumnzxDslSubBoardSubCardNo | not-accessible | current | subcard number |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.5 | ColumnzxDslSubBoardType | read-write | current | subBoard type |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.6 | ColumnzxDslSubBoardDescr | read-only | current | sub-board information. |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.7 | ColumnzxDslSubBoardStatus | read-only | current | This MIB is defined for the sub card status on the card. inService(1) provided normally. notInService(2) hwOnline(3) isn't running now. hwOffline(4) configurin… |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.8 | ColumnzxDslSubBoardReset | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.9 | ColumnzxDslSubBoardRowStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.10 | ColumnzxDslSubBoardHardVersion | read-only | current | sub board hard version, default is UNKNOWN |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.11 | ColumnzxDslSubBoardSoftVersion | read-only | current | sub board software version, default is UNKNOWN |
| 1.3.6.1.4.1.3902.1004.3.1.1.5.1.12 | ColumnzxDslSubBoardPortNum | read-only | current | sub board port number |
| 1.3.6.1.4.1.3902.1004.3.1.1.6 | TablezxDslBoardTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifE… |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1 | RowzxDslBoardEntry | not-accessible | current | An entry in zxDslBoardTable. |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.1 | ColumnzxDslBoardRackNo | not-accessible | current | rack number |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.2 | ColumnzxDslBoardShelfNo | not-accessible | current | shelf number |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.3 | ColumnzxDslBoardSlotNo | not-accessible | current | slot number |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.4 | ColumnzxDslBoardType | read-only | current | board type |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.5 | ColumnzxDslBoardDescr | read-only | current | board descript |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.6 | ColumnzxDslBoardPortNum | read-only | current | board portnum |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.7 | ColumnzxDslBoardPortType | read-only | current | board port type |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.8 | ColumnzxDslBoardAdminStatus | read-write | current | board administrative status. |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.9 | ColumnzxDslBoardOperStatus | read-only | current | board operational status |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.10 | ColumnzxDslBoardHardVersion | read-only | current | board hard version |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.11 | ColumnzxDslBoardSoftVersion | read-only | current | board software version |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.12 | ColumnzxDslBoardSoftLastChange | read-only | current | soft last change |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.13 | ColumnzxDslBoardReset | read-write | current | Server as reset card |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.14 | ColumnzxDslBoardCpuLoad | read-only | current | Server as cup load of card |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.15 | ColumnzxDslBoardCpuLoadThreshhold | read-write | current | Server as cup load of card |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.16 | ColumnzxDslBoardMemUsage | read-only | current | Server as memory usage rate of card |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.17 | ColumnzxDslBoardMemUsageThreshhold | read-write | current | Server as memory usage rate of card |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.18 | ColumnzxDslBoardActPortNum | read-only | current | Server as active port numbers of card |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.19 | ColumnzxDslBoardHardVerStatus | read-only | current | Server as v1 or v2 line card of 8000, g1 or g2 line type of 8000 |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.20 | ColumnzxDslBoardSoftVerCfg | read-write | current | Server as configuring the running software type on atugb |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.21 | ColumnzxDslBoardStandByStatus | read-write | current | Board standBy status. NOTE: Not available now. |
| 1.3.6.1.4.1.3902.1004.3.1.1.6.1.22 | ColumnzxDslBoardMemTotalSize | read-only | current | Total memory size of board |
| 1.3.6.1.4.1.3902.1004.3.1.1.7 | TablezxDslCardInvMgmtTable | not-accessible | current | A list of card entries. |
| 1.3.6.1.4.1.3902.1004.3.1.1.7.1 | RowzxDslCardInvMgmtEntry | not-accessible | current | An card entry containing objects describing the card in some slot. |
| 1.3.6.1.4.1.3902.1004.3.1.1.7.1.1 | ColumnzxDslCardInvRack | not-accessible | current | The rack number of the card |
| 1.3.6.1.4.1.3902.1004.3.1.1.7.1.2 | ColumnzxDslCardInvShelf | not-accessible | current | The shelf number of the card |
| 1.3.6.1.4.1.3902.1004.3.1.1.7.1.3 | ColumnzxDslCardInvSlot | not-accessible | current | The slot number of the card |
| 1.3.6.1.4.1.3902.1004.3.1.1.7.1.4 | ColumnzxDslCardInvSubSlot | not-accessible | current | The sub slot number of the card.If there is no sublot,then this value is 0. |
| 1.3.6.1.4.1.3902.1004.3.1.1.7.1.5 | ColumnzxDslCardInvSn | read-write | current | The series number of the card. |
| 1.3.6.1.4.1.3902.1004.3.1.1.7.1.6 | ColumnzxDslCardInvCleiCode | read-only | current | The CLEI code of the card.It is a present of a cardtype. |
| 1.3.6.1.4.1.3902.1004.3.1.2 | NodezxDslEnvMon | |||
| 1.3.6.1.4.1.3902.1004.3.1.2.1 | ScalarzxDslEnvChassisTemperature | read-only | current | The current temperature of the chassis. |
| 1.3.6.1.4.1.3902.1004.3.1.2.2 | ScalarzxDslEnvTemperatureThreshold | read-write | current | The threshold of the chassis temperature,zxDslEnvTempExceeded trap should be generated when zxDslEnvChassisTemperature is lareger than it. Otherwise,zxDslEnvTe… |
| 1.3.6.1.4.1.3902.1004.3.1.2.3 | ScalarzxDslEnvTemperatureTrapEnable | read-write | current | The administrative status of temperature alarm trap. |
| 1.3.6.1.4.1.3902.1004.3.1.2.4 | ScalarzxDslEnvFanMgmtCap | read-only | current | The capabilities to be controlled. speed_control(1) alarm_send(2) shutdown_control(3) |
| 1.3.6.1.4.1.3902.1004.3.1.2.5 | ScalarzxDslEnvFanSpeedCtrlType | read-write | current | The control type of fan speed. If fix_Speed(2) is selected,zxDslEnvFanSpeed in zxDslEnvFanTable should be configured. |
| 1.3.6.1.4.1.3902.1004.3.1.2.6 | ScalarzxDslEnvFanTrapEnable | read-write | current | The administrative status of fun's alarm trap. |
| 1.3.6.1.4.1.3902.1004.3.1.2.7 | ScalarzxDslEnvFanTrayAlarmBeep | read-write | current | Enable or disable the alarm beep for fun tray. |
| 1.3.6.1.4.1.3902.1004.3.1.2.8 | ScalarzxDslEnvEpmRelaySwitchEnable | read-write | current | Enable or disable the EPM relay switch. if it's disabled, there will be four environment switch, and if it's enabled, there will be only two environment switch… |
| 1.3.6.1.4.1.3902.1004.3.1.2.9 | ScalarzxDslEnvLossOfPowerTrapEnable | read-write | current | Enable or disable the dying gasp event when the device is power off or power failure. |
| 1.3.6.1.4.1.3902.1004.3.1.2.10 | TablezxDslEnvFanTable | not-accessible | current | The table of fan's managed objects.Each row instance represents a controllable fan unit,may be a controlled fan or a controlled fan tray. When zxDslEnvFanOpers… |
| 1.3.6.1.4.1.3902.1004.3.1.2.10.1 | RowzxDslEnvFanEntry | not-accessible | current | a entry of this table. |
| 1.3.6.1.4.1.3902.1004.3.1.2.10.1.1 | ColumnzxDslEnvFanIndex | not-accessible | current | The index of this fan or fan tray referred to in this table entry. |
| 1.3.6.1.4.1.3902.1004.3.1.2.10.1.2 | ColumnzxDslEnvFanSpeed | read-create | current | The speed of fan. If it is to be set, zxDslEnvFanSpeedCtrlType must be fix_Speed(2). |
| 1.3.6.1.4.1.3902.1004.3.1.2.10.1.3 | ColumnzxDslEnvFanAdminstatus | read-create | current | The adminstrative status of fan |
| 1.3.6.1.4.1.3902.1004.3.1.2.10.1.4 | ColumnzxDslEnvFanOperstatus | read-only | current | The operational status of a fan. |
| 1.3.6.1.4.1.3902.1004.3.1.2.11 | TablezxDslEnvDeviceTable | not-accessible | current | The table of environment monitor Device. |
| 1.3.6.1.4.1.3902.1004.3.1.2.11.1 | RowzxDslEnvDeviceEntry | not-accessible | current | a entry of this table. |
| 1.3.6.1.4.1.3902.1004.3.1.2.11.1.1 | ColumnzxDslEnvEnvDeviceIndex | not-accessible | current | The index of this environment monitor Device. |
| 1.3.6.1.4.1.3902.1004.3.1.2.11.1.2 | ColumnzxDslEnvEnvDeviceName | read-create | current | the name of environment monitor Device. zxDslEnvEnvDeviceIndex 1-50 is default value,can't delete or modify. |
| 1.3.6.1.4.1.3902.1004.3.1.2.11.1.3 | ColumnzxDslEnvDeviceRowStatus | read-create | current | The status of this table. |
| 1.3.6.1.4.1.3902.1004.3.1.2.12 | TablezxDslEnvSwitchTable | not-accessible | current | The table of switch's managed objects.Each row instance represents a device connected with this switch. |
| 1.3.6.1.4.1.3902.1004.3.1.2.12.1 | RowzxDslEnvSwitchEntry | not-accessible | current | a entry of this table. |
| 1.3.6.1.4.1.3902.1004.3.1.2.12.1.1 | ColumnzxDslEnvSwitchIndex | not-accessible | current | The index of this Switch. |
| 1.3.6.1.4.1.3902.1004.3.1.2.12.1.2 | ColumnzxDslEnvDeviceId | read-write | current | The device id.If this switch can't connect with any device, zxDslEnvDeviceId set to 0. |
| 1.3.6.1.4.1.3902.1004.3.1.2.12.1.3 | ColumnzxDslEnvSwitchNormalStatus | read-write | current | The Threshold of this environment monitor Device. |
| 1.3.6.1.4.1.3902.1004.3.1.2.12.1.4 | ColumnzxDslEnvSwitchEnable | read-write | current | Enables and disables Trap of this environment monitor Device. |
| 1.3.6.1.4.1.3902.1004.3.1.2.12.1.5 | ColumnzxDslEnvSwitchCurrentStatus | read-only | current | The current status of this environment monitor Device. |
| 1.3.6.1.4.1.3902.1004.3.1.2.13 | NodezxDslEnvExteriorPower | |||
| 1.3.6.1.4.1.3902.1004.3.1.2.13.1 | ScalarzxDslEnvExteriorPowerEnable | read-write | current | Enables and disables Trap of Exterior Power. |
| 1.3.6.1.4.1.3902.1004.3.1.2.14 | NodezxDslEnvBatteriesVoltage | |||
| 1.3.6.1.4.1.3902.1004.3.1.2.14.1 | ScalarzxDslEnvBatteriesVoltageEnable | read-write | current | Enables and disables Trap of Batteries Voltage. |
| 1.3.6.1.4.1.3902.1004.3.1.2.15 | NodezxDslEnvPowerFailure | |||
| 1.3.6.1.4.1.3902.1004.3.1.2.15.1 | ScalarzxDslEnvPowerFailureEnable | read-write | current | Enables and disables Trap of Power Failure. |
| 1.3.6.1.4.1.3902.1004.3.1.2.16 | NodezxDslEnvCtrlObjects | |||
| 1.3.6.1.4.1.3902.1004.3.1.2.16.1 | ScalarzxDslEnvMonitorInterfaceUsage | read-write | current | The equipment type connected to the enviroment monitor interface. The possible values are: epm(1) - connect to EPM device battery(2) - direct connect to batter… |
| 1.3.6.1.4.1.3902.1004.3.1.2.16.2 | ScalarzxDslEnvMonitorInterfaceTrapEnable | read-write | current | Indicates whether linkUp/linkDown traps should be generated for MonitorInterface. |
| 1.3.6.1.4.1.3902.1004.3.1.2.16.3 | ScalarzxDslEnvFanAutoCtrlEnable | read-write | current | Enable or disble the autocontrol of fan by temperature. |
| 1.3.6.1.4.1.3902.1004.3.1.2.16.4 | ScalarzxDslEnvFanCtrlTemperatureThresh | read-write | current | The temperature threshold of fan for start-up or shut down, in Celsiur scale. |
| 1.3.6.1.4.1.3902.1004.3.1.2.16.5 | ScalarzxDslEnvTemperatureLowerThreshold | read-write | current | The lower threshold of the chassis temperature,the zxDslTempUnderThreshTrap trap should be generated when zxDslEnvChassisTemperature is lower than it. Otherwis… |
| 1.3.6.1.4.1.3902.1004.3.1.2.16.6 | ScalarzxDslEnvBatteryEnergySavingEnable | read-write | current | enable or disable energy saving for battery. if enabled, device will switch to energy saving mode when the exterior power lose and battery as power supply. |
| 1.3.6.1.4.1.3902.1004.3.1.2.16.7 | ScalarzxDslEnvFanFaultInfo | read-only | current | This object indicates the failed fan list. e.g., 1,3-5 means Fan 1,Fan 3,Fan 4 and Fan 5 are in failure. |
| 1.3.6.1.4.1.3902.1004.3.1.2.16.8 | ScalarzxDslEnvFanTotalNumber | read-only | current | The total Number of Fans. |
| 1.3.6.1.4.1.3902.1004.3.1.2.17 | NodezxDslEnvMonitorElecLock | |||
| 1.3.6.1.4.1.3902.1004.3.1.2.17.1 | TablezxDslEnvMonitorElecLockServerTable | not-accessible | current | electric lock server table. |
| 1.3.6.1.4.1.3902.1004.3.1.2.17.1.1 | RowzxDslEnvMonitorElecLockServerEntry | not-accessible | current | electric lock server entry |
| 1.3.6.1.4.1.3902.1004.3.1.2.17.1.1.1 | ColumnzxDslEnvMonitorElecLockServerAddress | not-accessible | current | The server address for electric lock monitor. |
| 1.3.6.1.4.1.3902.1004.3.1.2.17.1.1.2 | ColumnzxDslEnvMonitorElecLockServerRowStatus | read-create | current | rowstatus |
| 1.3.6.1.4.1.3902.1004.3.1.3 | NodezxDslVersion | |||
| 1.3.6.1.4.1.3902.1004.3.1.3.1 | TablezxDslVerCfgTable | not-accessible | current | A table entry containing AdslVersion information for each port. These variables are not in RFC2495 configuration table. |
| 1.3.6.1.4.1.3902.1004.3.1.3.1.1 | RowzxDslVerCfgEntry | not-accessible | current | AdslVersion information entry |
| 1.3.6.1.4.1.3902.1004.3.1.3.1.1.1 | ColumnzxDslVerTypeName | not-accessible | current | |
| 1.3.6.1.4.1.3902.1004.3.1.3.1.1.2 | ColumnzxDslEraseFileName | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.3.1.1.3 | ColumnzxDslActiveFileName | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.3.1.1.4 | ColumnzxDslEraseVerType | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.3.2 | TablezxDslVersionTable | not-accessible | current | A table entry containing AdslVersion information for each port. These variables are not in RFC2495 configuration table. |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1 | RowzxDslVersionEntry | not-accessible | current | AdslVersion information entry |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1.1 | ColumnzxDslVerFileName | not-accessible | current | the file name of the version |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1.2 | ColumnzxDslVersionNo | read-only | current | the version id |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1.3 | ColumnzxDslVerType | read-only | current | the version type |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1.4 | ColumnzxDslVerCreateTime | read-only | current | the version Create Time |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1.5 | ColumnzxDslVerDownLoadTime | read-only | current | the version DownLoad Time |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1.6 | ColumnzxDslVersionStatus | read-only | current | the version Status |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1.7 | ColumnzxDslVerLen | read-only | current | the version length |
| 1.3.6.1.4.1.3902.1004.3.1.3.2.1.8 | ColumnzxDslVersionState | read-only | current | the version active state |
| 1.3.6.1.4.1.3902.1004.3.1.3.3 | TablezxDslPatchTable | not-accessible | current | A table entry containing patch information. |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1 | RowzxDslPatchEntry | not-accessible | current | patch information entry |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.1 | ColumnzxDslPatchName | not-accessible | current | the file name of the patch |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.2 | ColumnzxDslPatchSystemVersion | read-only | current | the system version of the patch |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.3 | ColumnzxDslPatchVersionNo | read-only | current | the version no of the patch |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.4 | ColumnzxDslPatchSize | read-only | current | the version length of the patch |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.5 | ColumnzxDslPatchStatus | read-only | current | the status of the patch, such as activated, deactivated and autorun |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.6 | ColumnzxDslPatchCreateTime | read-only | current | the patch create time |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.7 | ColumnzxDslPatchActiveTime | read-only | current | the patch active time |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.8 | ColumnzxDslPatchRunningTime | read-only | current | the running time of the patch |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.9 | ColumnzxDslPatchDesc | read-only | current | the patch description |
| 1.3.6.1.4.1.3902.1004.3.1.3.3.1.10 | ColumnzxDslPatchAdminStatus | read-write | current | config the status of patch |
| 1.3.6.1.4.1.3902.1004.3.1.4 | NodezxDslCommon | |||
| 1.3.6.1.4.1.3902.1004.3.1.4.1 | ScalarzxDslCliPrompt | read-write | current | prompt name of the zxDsl. (ex. fasp#) |
| 1.3.6.1.4.1.3902.1004.3.1.4.2 | ScalarzxDslLineTestRootMode | read-write | current | A flag is to indicate whether the MasterToSLave transfering is going on. |
| 1.3.6.1.4.1.3902.1004.3.1.4.3 | ScalarzxDslEPMConfType | read-write | current | the EPM config type. |
| 1.3.6.1.4.1.3902.1004.3.1.4.4 | ScalarzxDslSaveToNvm | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.4.5 | ScalarzxDslEraseNvm | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.4.6 | ScalarzxDslSwapCore | read-write | current | The flag that master to slave. |
| 1.3.6.1.4.1.3902.1004.3.1.4.7 | ScalarzxDslBorrowBoardSet | read-write | current | The borrow board type. |
| 1.3.6.1.4.1.3902.1004.3.1.4.8 | ScalarzxDslBorrowBoardGet | read-only | current | The actual borrow board type |
| 1.3.6.1.4.1.3902.1004.3.1.4.9 | ScalarzxDslSysDateTime | read-write | current | yyyy-mm-dd HH:MM:SS.For example(2001-01-01 02:22:33). |
| 1.3.6.1.4.1.3902.1004.3.1.4.10 | ScalarzxDslTimeZoneOffset | read-write | current | Time zone offset. The zone offset can be 0 for GMT or it can be a value '+' or '-' from GMT. |
| 1.3.6.1.4.1.3902.1004.3.1.4.11 | ScalarzxDslIsHalfTimeZone | read-write | current | Whether it is a half zone.If it is true(1),the local time should be plused 0.5 hours. |
| 1.3.6.1.4.1.3902.1004.3.1.4.12 | ScalarzxDslSystemReboot | read-write | current | Server as reboot system. |
| 1.3.6.1.4.1.3902.1004.3.1.4.13 | ScalarzxDslSystemPortList | read-write | current | Server as port batch configuring. |
| 1.3.6.1.4.1.3902.1004.3.1.4.14 | ScalarzxDslAutoSaveToNvmInterval | read-write | deprecated | The interval to save running configuration of agent to flash media automatically. The value 0 means disable the auto save flash operation. |
| 1.3.6.1.4.1.3902.1004.3.1.4.15 | ScalarzxDslTimingSaveModifiedToNvmInterval | read-write | current | The interval to save flash if running configuration of agent modified, value 0 means disable the auto save flash operation. |
| 1.3.6.1.4.1.3902.1004.3.1.4.16 | ScalarzxDslTimingSaveToNvmInterval | read-write | current | The interval to force saving flash , value 0 means disable the force save saving operation. |
| 1.3.6.1.4.1.3902.1004.3.1.4.17 | ScalarzxDslUserSideMtu | read-write | current | The user side maximum transmission unit, the packge from user side will be discard while it exceed this limit. |
| 1.3.6.1.4.1.3902.1004.3.1.4.18 | ScalarzxDslSysMaxPortNumPerSlot | read-only | current | The max port number per slot of the device. This number is used to compute the ifIndex. |
| 1.3.6.1.4.1.3902.1004.3.1.4.19 | ScalarzxDslSysOutbandPortUsage | read-write | current | The usage of outband port. outbandPort(1) - Switch the port usage to outband port. cascadePort(2) - Switch the port usage to cascade port. |
| 1.3.6.1.4.1.3902.1004.3.1.4.30 | TablezxDslPerfStatTable | not-accessible | current | This table provides one row for each adsl interface. Each row contains the perf statistic parameters for this adsl line |
| 1.3.6.1.4.1.3902.1004.3.1.4.30.1 | RowzxDslPerfStatEntry | not-accessible | current | An entry containing additional performance management information applicable to a adsl line interface. |
| 1.3.6.1.4.1.3902.1004.3.1.4.30.1.1 | ColumnzxDslPerfStatType | read-write | current | The type of performance metrics to be updated. |
| 1.3.6.1.4.1.3902.1004.3.1.4.30.1.2 | ColumnzxDslPerfStatTableList | read-write | current | bitmap for perf statistic object table |
| 1.3.6.1.4.1.3902.1004.3.1.4.30.1.3 | ColumnzxDslPerfStatAction | read-write | current | bitmap for perf statistic object table |
| 1.3.6.1.4.1.3902.1004.3.1.4.31 | TablezxDslUserTable | not-accessible | current | A table contain user information for web and console and telnet.. |
| 1.3.6.1.4.1.3902.1004.3.1.4.31.1 | RowzxDslUserEntry | not-accessible | current | A list of user information. |
| 1.3.6.1.4.1.3902.1004.3.1.4.31.1.1 | ColumnzxDslUserIndex | not-accessible | current | A simple index into 'TmsCommonMiscUserTable'. |
| 1.3.6.1.4.1.3902.1004.3.1.4.31.1.2 | ColumnzxDslUserName | read-write | current | A simple index into 'TmsCommonMiscUserTable'. |
| 1.3.6.1.4.1.3902.1004.3.1.4.31.1.3 | ColumnzxDslUserPwd | read-write | current | A simple index into 'TmsCommonMiscUserTable'. |
| 1.3.6.1.4.1.3902.1004.3.1.4.31.1.4 | ColumnzxDslUserAccess | read-write | current | the user access in this row. |
| 1.3.6.1.4.1.3902.1004.3.1.4.31.1.5 | ColumnzxDslUserRowStatus | read-write | current | the user state in this row. |
| 1.3.6.1.4.1.3902.1004.3.1.4.33 | TablezxDslTrapHostTable | not-accessible | current | This table, which provides Trap target. |
| 1.3.6.1.4.1.3902.1004.3.1.4.33.1 | RowzxDslTrapHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1004.3.1.4.33.1.1 | ColumnzxDslTrapHostIpAddr | not-accessible | current | |
| 1.3.6.1.4.1.3902.1004.3.1.4.33.1.2 | ColumnzxDslTrapHostSnmpVer | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.4.33.1.3 | ColumnzxDslTrapHostCommunity | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.4.33.1.4 | ColumnzxDslTrapHostIsZteNmsSever | read-create | current | If or not it is a zte's nms. true(1): it is a zte's nms; false(2): it is not a zte's nms. |
| 1.3.6.1.4.1.3902.1004.3.1.4.33.1.5 | ColumnzxDslTrapHostRowStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.4.33.1.6 | ColumnzxDslTrapHostEventType | read-create | current | The event type that a receiver expects. The event type are defined in ITU-T X.733. - equipment event type: An event of this type is principally associated with… |
| 1.3.6.1.4.1.3902.1004.3.1.4.33.1.7 | ColumnzxDslTrapHostMinEventLevel | read-create | current | The min event level that a receiver expects.If the actual event level is more serious than this value,the event will be sent to Event Receiver. For example,if … |
| 1.3.6.1.4.1.3902.1004.3.1.4.34 | TablezxDslSysIfCtrlTable | not-accessible | current | An (conceptual) table listing of zxDsl system interface extend attribute. |
| 1.3.6.1.4.1.3902.1004.3.1.4.34.1 | RowzxDslSysIfCtrlEntry | not-accessible | current | An entry (conceptual) table listing of zxDsl system interface extend attribute. |
| 1.3.6.1.4.1.3902.1004.3.1.4.34.1.1 | ColumnzxDslSysIfTrapCtrl | read-write | current | port trap control. |
| 1.3.6.1.4.1.3902.1004.3.1.4.34.1.2 | ColumnzxDslSysIfType | read-write | current | If type . |
| 1.3.6.1.4.1.3902.1004.3.1.5 | NodezxDslCluster | |||
| 1.3.6.1.4.1.3902.1004.3.1.5.1 | ScalarzxDslStackModuleId | read-write | current | moduleId of this ZXDSL in this stack system. |
| 1.3.6.1.4.1.3902.1004.3.1.5.2 | ScalarzxDslStackModuleNum | read-write | current | moduleNum of this ZXDSL in this stack system. |
| 1.3.6.1.4.1.3902.1004.3.1.5.3 | ScalarzxDslStackModuleRole | read-write | current | role of this ZXDSL in this stack system. |
| 1.3.6.1.4.1.3902.1004.3.1.5.4 | TablezxDslStackTable | not-accessible | current | The (conceptual) table listing of zxDsl system stack. |
| 1.3.6.1.4.1.3902.1004.3.1.5.4.1 | RowzxDslStackEntry | not-accessible | current | An entry (conceptual) table listing of zxDsl system stack. |
| 1.3.6.1.4.1.3902.1004.3.1.5.4.1.1 | ColumnzxDslStackIndex | not-accessible | current | stackid of zxDsl system. |
| 1.3.6.1.4.1.3902.1004.3.1.5.4.1.2 | ColumnzxDslStackIpAddr | read-create | current | stack ip address of zxDsl system. |
| 1.3.6.1.4.1.3902.1004.3.1.5.4.1.3 | ColumnzxDslStackRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.3902.1004.3.1.7 | NodezxDslFtp | |||
| 1.3.6.1.4.1.3902.1004.3.1.7.1 | ScalarzxDslFtpManagedObjectType | read-write | current | Operation type, related with following operations. port config file:PORT_INFO,DSL_PORT_INFO startup config file:STARTUP_CONFIG running config file:RUNNING_CONF… |
| 1.3.6.1.4.1.3902.1004.3.1.7.2 | ScalarzxDslFtpAddress | read-write | current | The IP Address for the FTP server used for downloading and/or uploading files. |
| 1.3.6.1.4.1.3902.1004.3.1.7.3 | ScalarzxDslFtpUserName | read-write | current | The FTP username. |
| 1.3.6.1.4.1.3902.1004.3.1.7.4 | ScalarzxDslFtpUserPwd | read-write | current | The FTP User Password. |
| 1.3.6.1.4.1.3902.1004.3.1.7.5 | ScalarzxDslFtpFilePath | read-write | current | The FTP File Path, start from the root directory. |
| 1.3.6.1.4.1.3902.1004.3.1.7.6 | ScalarzxDslFtpFileName | read-write | current | The FTP file path and name. |
| 1.3.6.1.4.1.3902.1004.3.1.7.7 | ScalarzxDslFtpLoadType | read-write | current | Ftp load type. |
| 1.3.6.1.4.1.3902.1004.3.1.7.8 | ScalarzxDslDownloadStatus | read-only | current | Ftp operation status. |
| 1.3.6.1.4.1.3902.1004.3.1.7.9 | ScalarzxDslFtpAddressType | read-write | current | The type of IP Address for FTP server. |
| 1.3.6.1.4.1.3902.1004.3.1.7.10 | ScalarzxDslFtpIpv6Address | read-write | current | The IPv6 Ip Address for FTP server. |
| 1.3.6.1.4.1.3902.1004.3.1.7.11 | ScalarzxDslFtpProtocolType | read-write | current | zxDslFtpProtocolType is used to indicate the ftp protocol. It includes two protocols: one is ftp and the other is sftp. |
| 1.3.6.1.4.1.3902.1004.3.1.8 | NodezxDslAddress | |||
| 1.3.6.1.4.1.3902.1004.3.1.8.1 | ScalarzxDslOutBandIpAddress | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.8.2 | ScalarzxDslOutBandIpMask | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.8.3 | ScalarzxDslOutBandMACAddress | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.8.4 | ScalarzxDslInBandMACAddress | read-write | current | |
| 1.3.6.1.4.1.3902.1004.3.1.8.5 | TablezxDslInBandTable | not-accessible | current | A table of subnet parameters. There is one entry available for each of the 'tmsL3InBandMaxRows' supported IP subnets. |
| 1.3.6.1.4.1.3902.1004.3.1.8.5.1 | RowzxDslInBandEntry | not-accessible | current | A list of subnet parameters. |
| 1.3.6.1.4.1.3902.1004.3.1.8.5.1.1 | ColumnzxDslInBandIpAddr | not-accessible | current | DURABLE: The network management station uses this IP Address to talk with the Agent on this subnet. This IP address logically AND'ed with 'tmsL3InBandMask' yie… |
| 1.3.6.1.4.1.3902.1004.3.1.8.5.1.2 | ColumnzxDslInBandIpMask | read-create | current | DURABLE: The subnet mask for this subnet. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's mus… |
| 1.3.6.1.4.1.3902.1004.3.1.8.5.1.3 | ColumnzxDslInBandIpVid | read-create | current | DURABLE: { default=0:all } For a L2/L3 hybrid switch, this object contains the actual VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned. For a L3 only… |
| 1.3.6.1.4.1.3902.1004.3.1.8.5.1.4 | ColumnzxDslInBandIpName | read-create | current | DURABLE: { '':all ) A user reference name for this subnet. |
| 1.3.6.1.4.1.3902.1004.3.1.8.5.1.5 | ColumnzxDslInBandIpUseType | read-create | current | Inband IP address type. normal (1) - Inband IP address; modem (2) - Modem management; voip (3) - VoIP subnet IP address; media (4) - VoIP media subnet IP addre… |
| 1.3.6.1.4.1.3902.1004.3.1.8.5.1.6 | ColumnzxDslInBandIpRowStatus | read-create | current | DURABLE: This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is n… |
| 1.3.6.1.4.1.3902.1004.3.1.9 | NodezxDslNmsAccessCtrl | |||
| 1.3.6.1.4.1.3902.1004.3.1.9.1 | TablezxDslCommunityConfTable | not-accessible | current | A table of SNMPv1/v2c community string configuration. |
| 1.3.6.1.4.1.3902.1004.3.1.9.1.1 | RowzxDslCommunityConfEntry | not-accessible | current | A list of community strings. |
| 1.3.6.1.4.1.3902.1004.3.1.9.1.1.1 | ColumnzxDslCommunityConfCommunity | not-accessible | current | DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Name must begin with alphabetic character or '_' and '@' shouldn't be used in community stri… |
| 1.3.6.1.4.1.3902.1004.3.1.9.1.1.2 | ColumnzxDslCommunityConfPermission | read-create | current | DURABLE: { readWrite:all } This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite… |
| 1.3.6.1.4.1.3902.1004.3.1.9.1.1.3 | ColumnzxDslCommunityConfViewName | read-create | current | This object is reserved now. DURABLE: { 'internet':all } At runtime (i.e., not when this object is SET), this view name is compared to the 'vacmViewTreeFamilyV… |
| 1.3.6.1.4.1.3902.1004.3.1.9.1.1.4 | ColumnzxDslCommunityConfRowStatus | read-create | current | DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - su… |
| 1.3.6.1.4.1.3902.1004.3.1.10 | NodezxDslSntp | |||
| 1.3.6.1.4.1.3902.1004.3.1.10.1 | ScalarzxDslSntpEnable | read-write | current | Enable/disable NTP in this system. |
| 1.3.6.1.4.1.3902.1004.3.1.10.2 | ScalarzxDslSntpServerIp | read-write | current | The NTP server's IP address |
| 1.3.6.1.4.1.3902.1004.3.1.10.3 | ScalarzxDslSntpPollInterval | read-write | current | The NTP server's fetch time's interval time, the default is 64 |
| 1.3.6.1.4.1.3902.1004.3.1.10.5 | ScalarzxDslSntpStratum | read-only | current | The local NTP server 's stratum. If it is 16,then it means that this device has not synchronied time, and it is a invalid value. |
| 1.3.6.1.4.1.3902.1004.3.1.10.6 | ScalarzxDslSntpSynchStatus | read-only | current | The NTP server whether is synchronized or not |
| 1.3.6.1.4.1.3902.1004.3.1.10.7 | ScalarzxDslSntpSlaveServerIp | read-write | current | The slave NTP server's IP address |
| 1.3.6.1.4.1.3902.1004.3.1.10.8 | ScalarzxDslSntpCurrTryingSynchServerIp | read-only | current | The NTP server's IP which is being tried to synchronize time now. |
| 1.3.6.1.4.1.3902.1004.3.1.10.9 | ScalarzxDslSntpLastSynchronizedServerIP | read-only | current | The NTP server's IP address of last ntp synchronization. |
| 1.3.6.1.4.1.3902.1004.3.1.10.10 | ScalarzxDslSysSntpCurrentOffset | read-only | current | The Time offset to the current selected reference time source. |
| 1.3.6.1.4.1.3902.1004.3.1.10.11 | ScalarzxDslSysSntpOffsetAlarmThreshold | read-only | current | The alarm threshold of NTP time offset to the current selected reference time source.When this threshold is across,the trap zxDslSysSntpOffsetOverThreshTrap sh… |
| 1.3.6.1.4.1.3902.1004.3.1.11 | NodezxDslOpticalPower | |||
| 1.3.6.1.4.1.3902.1004.3.1.11.1 | ScalarzxDslOpticalPowerRx | read-only | current | Received optical power |
| 1.3.6.1.4.1.3902.1004.3.1.11.2 | ScalarzxDslOpticalPowerTx | read-only | current | Transmitted optical power |
| 1.3.6.1.4.1.3902.1004.3.1.12 | NodezxDslVoipDhcp | |||
| 1.3.6.1.4.1.3902.1004.3.1.12.1 | ScalarzxDslVoipDhcpEnable | read-write | current | The VOIP DHCP status. The IP subnet for VOIP should be configed first. |
| 1.3.6.1.4.1.3902.1004.3.1.12.2 | ScalarzxDslVoipDhcpIpAddress | read-only | current | The IP address for VOIP when zxDslVoipDhcpEnable is enable. When zxDslVoipDhcpEnable is disable, VOIP IP address should be getted from IP subnet table. |
| 1.3.6.1.4.1.3902.1004.3.1.12.3 | ScalarzxDslVoipDhcpIpMask | read-only | current | The IP mask for VOIP when zxDslVoipDhcpEnable is enable. When zxDslVoipDhcpEnable is disable, VOIP IP mask should be getted from IP subnet table. |
| 1.3.6.1.4.1.3902.1004.3.1.12.4 | ScalarzxDslVoipDhcpRoute | read-only | current | The route for VOIP when zxDslVoipDhcpEnable is enable. When zxDslVoipDhcpEnable is disable, VOIP route should be getted from IP route table. |
| 1.3.6.1.4.1.3902.1004.3.1.12.5 | ScalarzxDslVoipDhcpOption60Enable | read-write | current | The VOIP DHCP Option60 status. |
| 1.3.6.1.4.1.3902.1004.3.1.12.6 | ScalarzxDslVoipDhcpOption60Vendor | read-write | current | The VOIP DHCP Option60 Vendor. |
| 1.3.6.1.4.1.3902.1004.3.1.12.7 | ScalarzxDslVoipDhcpOption60Category | read-write | current | The VOIP DHCP Option60 Category. |
| 1.3.6.1.4.1.3902.1004.3.1.12.8 | ScalarzxDslVoipDhcpOption60Model | read-write | current | The VOIP DHCP Option60 Model. |
| 1.3.6.1.4.1.3902.1004.3.1.12.9 | ScalarzxDslVoipDhcpOption60Version | read-write | current | The VOIP DHCP Option60 Version. |
| 1.3.6.1.4.1.3902.1004.3.1.12.10 | ScalarzxDslVoipDhcpReRequestEnable | read-write | current | When zxDslVoipDhcpReRequestEnable is enable, device will re-request an IP address by DHCP as VoIP service is broken. This object is valid when zxDslVoipDhcpEna… |
| 1.3.6.1.4.1.3902.1004.3.1.12.11 | ScalarzxDslVoipDhcpReRequestInterval | read-write | current | The interval that device re-requests an IP address after VoIP service is broken. This object is valid when zxDslVoipDhcpReRequestEnable is enable. |
| 1.3.6.1.4.1.3902.1004.3.1.13 | NodezxDslSyslog | |||
| 1.3.6.1.4.1.3902.1004.3.1.13.1 | NodezxDslSyslogGlobalObjects | |||
| 1.3.6.1.4.1.3902.1004.3.1.13.1.1 | ScalarzxDslSyslogFacility | read-write | current | The syslog message facility. The priority value of PRI is calculated by first multiplying the Facility number by 8 and then adding the numerical value of the S… |
| 1.3.6.1.4.1.3902.1004.3.1.13.1.2 | ScalarzxDslSyslogSeverity | read-write | current | The syslog message severity, The priority value of PRI is calculated by first multiplying the Facility number by 8 and then adding the numerical value of the S… |
| 1.3.6.1.4.1.3902.1004.3.1.13.1.3 | ScalarzxDslSyslogSrcPort | read-write | current | The syslog source udp port. |
| 1.3.6.1.4.1.3902.1004.3.1.13.1.4 | ScalarzxDslSyslogCmdLogEnable | read-write | deprecated | Enable/Disable the cmd log in syslog. |
| 1.3.6.1.4.1.3902.1004.3.1.13.1.5 | ScalarzxDslSyslogSnmpLogEnable | read-write | deprecated | Enable/Disable the snmp log in syslog. |
| 1.3.6.1.4.1.3902.1004.3.1.13.1.6 | ScalarzxDslSyslogAlarmLogEnable | read-write | deprecated | Enable/Disable the alarm log in syslog. |
| 1.3.6.1.4.1.3902.1004.3.1.13.1.7 | ScalarzxDslSyslogAlarmLogLevel | read-write | deprecated | The alarm log level in syslog. |
| 1.3.6.1.4.1.3902.1004.3.1.13.2 | TablezxDslSyslogHostTable | not-accessible | current | syslog host table. |
| 1.3.6.1.4.1.3902.1004.3.1.13.2.1 | RowzxDslSyslogHostEntry | not-accessible | current | An entry in zxDslSyslogHostTable. |
| 1.3.6.1.4.1.3902.1004.3.1.13.2.1.1 | ColumnzxDslSyslogHostIpAddr | not-accessible | current | The syslog server ip address. |
| 1.3.6.1.4.1.3902.1004.3.1.13.2.1.2 | ColumnzxDslSyslogDesPort | read-create | current | The syslog destination udp port. |
| 1.3.6.1.4.1.3902.1004.3.1.13.2.1.10 | ColumnzxDslSyslogHostRowStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.14 | NodezxDslIpv6Objects | |||
| 1.3.6.1.4.1.3902.1004.3.1.14.1 | TablezxDslIpv6InBandTable | not-accessible | current | A table of subnet parameters. There is one entry available for each of the 'tmsL3InBandMaxRows' supported IP subnets. |
| 1.3.6.1.4.1.3902.1004.3.1.14.1.1 | RowzxDslIpv6InBandEntry | not-accessible | current | A list of subnet parameters. |
| 1.3.6.1.4.1.3902.1004.3.1.14.1.1.1 | ColumnzxDslIpv6InBandInetAddress | not-accessible | current | DURABLE: The network management station uses this IP Address to talk with the Agent on this subnet. This IP address logically AND'ed with 'tmsL3InBandMask' yie… |
| 1.3.6.1.4.1.3902.1004.3.1.14.1.1.2 | ColumnzxDslIpv6InBandInetAddressPrefixLength | read-create | current | the prefix length of inband inet address. |
| 1.3.6.1.4.1.3902.1004.3.1.14.1.1.3 | ColumnzxDslIpv6InBandIpVid | read-create | current | DURABLE: { default=0:all } For a L2/L3 hybrid switch, this object contains the actual VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned. For a L3 only… |
| 1.3.6.1.4.1.3902.1004.3.1.14.1.1.4 | ColumnzxDslIpv6InBandIpName | read-create | current | DURABLE: { '':all ) A user reference name for this subnet. |
| 1.3.6.1.4.1.3902.1004.3.1.14.1.1.5 | ColumnzxDslIpv6InBandIpUseType | read-create | current | IPv6 Inband IP address type. normal (1) - Inband IP address; Modem (2) - Modem management; voip (3) - VoIP subnet IP address; media (4) - VoIP media subnet IP … |
| 1.3.6.1.4.1.3902.1004.3.1.14.1.1.6 | ColumnzxDslIpv6InBandIpRowStatus | read-create | current | DURABLE: This object indicates the status of this entry. A row in this table must be created using the createAndWait(5) action state (i.e., createAndGo(4) is n… |
| 1.3.6.1.4.1.3902.1004.3.1.14.2 | TablezxDslIpv6TrapHostTable | not-accessible | current | This table, which provides Trap target. |
| 1.3.6.1.4.1.3902.1004.3.1.14.2.1 | RowzxDslIpv6TrapHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1004.3.1.14.2.1.1 | ColumnzxDslIpv6TrapHostIpAddr | not-accessible | current | |
| 1.3.6.1.4.1.3902.1004.3.1.14.2.1.2 | ColumnzxDslIpv6TrapHostSnmpVer | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.14.2.1.3 | ColumnzxDslIpv6TrapHostCommunity | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.14.2.1.4 | ColumnzxDslIpv6TrapHostIsZteNmsSever | read-create | current | If or not it is a zte's nms. true(1): it is a zte's nms; false(2): it is not a zte's nms. |
| 1.3.6.1.4.1.3902.1004.3.1.14.2.1.5 | ColumnzxDslIpv6TrapHostEventType | read-create | current | The event type that a reciever expects. The event type are defined in ITU-T X.733. - equipment event type: An event of this type is principally associated with… |
| 1.3.6.1.4.1.3902.1004.3.1.14.2.1.6 | ColumnzxDslIpv6TrapHostMinEventLevel | read-create | current | The min event level that a reciever expects.If the actual event level is more serious then this value,the event will be sent to Event Reciever. For example,if … |
| 1.3.6.1.4.1.3902.1004.3.1.14.2.1.30 | ColumnzxDslIpv6TrapHostRowStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1004.3.1.14.3 | NodezxDslIpv6GlobalObjects | |||
| 1.3.6.1.4.1.3902.1004.3.1.14.3.1 | ScalarzxDslIpv6Enable | read-write | current | Enable/Disable IPv6. |
| 1.3.6.1.4.1.3902.1004.3.1.14.4 | NodezxDslIpv6OutbandAddress | |||
| 1.3.6.1.4.1.3902.1004.3.1.14.4.1 | ScalarzxDslIpv6OutBandInetAddr | read-write | current | Outband inet address. |
| 1.3.6.1.4.1.3902.1004.3.1.14.4.2 | ScalarzxDslIpv6OutBandInetAddrPfxLen | read-write | current | Outband inet address prefix length. |
| 1.3.6.1.4.1.3902.1004.3.1.15 | NodezxDslLocalizationObjects | |||
| 1.3.6.1.4.1.3902.1004.3.1.15.1 | NodezxDslLocalizationGlobalObjects | |||
| 1.3.6.1.4.1.3902.1004.3.1.15.1.1 | ScalarzxDslLanguage | read-write | current | The language for console and telnet. |
| 1.3.6.1.4.1.3902.1004.3.1.15.2 | TablezxDslLocalizationFileTable | not-accessible | current | This table includes the localization file information for console and telnet. |
| 1.3.6.1.4.1.3902.1004.3.1.15.2.1 | RowzxDslLocalizationFileEntry | not-accessible | current | An entry in zxDslLocalizationFileTable. |
| 1.3.6.1.4.1.3902.1004.3.1.15.2.1.1 | ColumnzxDslLocalizationFileType | not-accessible | current | Localization file type. |
| 1.3.6.1.4.1.3902.1004.3.1.15.2.1.2 | ColumnzxDslLocalizationFileVersion | read-only | current | The version number of the localization file. |
| 1.3.6.1.4.1.3902.1004.3.1.15.2.1.3 | ColumnzxDslLocalizationFileSize | read-only | current | The version length of the localization file. |
| 1.3.6.1.4.1.3902.1004.3.1.15.2.1.4 | ColumnzxDslLocalizationFileCreateTime | read-only | current | Create time of the localization file.The format is yyyymmdd HHMMSS.For example,20100707 131527 |
| 1.3.6.1.4.1.3902.1004.3.1.15.2.1.10 | ColumnzxDslLocalizationFileAdminStatus | read-write | current | Delete localization file. |
| 1.3.6.1.4.1.3902.1004.3.1.16 | NodezxDslModuleFileObjects | |||
| 1.3.6.1.4.1.3902.1004.3.1.16.1 | NodezxDslModuleFileGlobalObjects | |||
| 1.3.6.1.4.1.3902.1004.3.1.16.1.1 | ScalarzxDslModuleFileStatus | read-only | current | The status of the module file: notExist(1) - Module file does not exist. loadSucceeded(2) - Load module file succeeded. loadFailed(3) - Load module file failed. |
| 1.3.6.1.4.1.3902.1004.3.1.16.1.2 | ScalarzxDslModuleFileInfo | read-only | current | The information of the module file which includes NE version name, NE version No., module file version No. and module file build time. |
| 1.3.6.1.4.1.3902.1004.3.1.16.1.3 | ScalarzxDslEraseModuleFile | read-write | current | Value 1 means to erase the module file. |
| 1.3.6.1.4.1.3902.1004.3.2 | NodezxDslSysctrlTrapObjects | |||
| 1.3.6.1.4.1.3902.1004.3.2.1 | NotificationzxDslPrimaryCtrlCardSwapped | current | A zxDslPrimaryCtrlCardSwapped trap indicates that the main control card has swapped to slave card. | |
| 1.3.6.1.4.1.3902.1004.3.2.2 | NotificationzxDslCardUp | current | A zxDslCardUp trap indicates that the agent has detected that the card has been online. | |
| 1.3.6.1.4.1.3902.1004.3.2.3 | NotificationzxDslCardDown | current | A zxDslCardDown trap indicates that the agent has detected that the card has been offline. | |
| 1.3.6.1.4.1.3902.1004.3.2.4 | NotificationzxDslCpuLoadAlarm | current | A zxDslCpuLoadAlarm trap indicates that the agent has detected that the zxDslCardCPULoad object of one card has exceeded the configured threshhold value of zxD… | |
| 1.3.6.1.4.1.3902.1004.3.2.5 | NotificationzxDslCpuLoadAlarmCleard | current | A zxDslCpuLoadAlarmCleard trap indicates that the agent has detected that the zxDslCardCPULoad object of one card has less than the configured threshhold value… | |
| 1.3.6.1.4.1.3902.1004.3.2.6 | NotificationzxDslMemoryOverLoad | current | A zxDslMemoryOverLoad trap indicates that the agent has detected that the zxDslCardMemUsage object of one card has exceeded the configured threshhold value of … | |
| 1.3.6.1.4.1.3902.1004.3.2.7 | NotificationzxDslMemoryAlarmCleard | current | A zxDslMemoryAlarmCleard trap indicates that the agent has detected that the zxDslCardMemUsage object of one card has less than the configured threshhold value… | |
| 1.3.6.1.4.1.3902.1004.3.2.8 | NodezxDslEnvTrapGroup | |||
| 1.3.6.1.4.1.3902.1004.3.2.8.1 | NotificationzxDslEnvTempExceeded | current | A temperature inside the chassis has exceeded normal operating temperature zxDslEnvTemperatureThreshold. The zxDslEnvChassisTemperature object identifies the c… | |
| 1.3.6.1.4.1.3902.1004.3.2.8.2 | NotificationzxDslEnvTempNormal | current | A temperature inside the chassis has returned to normal operating temperature zxDslEnvTemperatureThreshold. The zxDslEnvChassisTemperature object identifies th… | |
| 1.3.6.1.4.1.3902.1004.3.2.8.3 | NotificationzxDslEnvFanFailed | current | A Fan tray on the device has failed. The zxDslEnvFanOperstatus object identifies the failed fan Operstatus. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.4 | NotificationzxDslEnvFanRecovered | current | A Fan tray on the device has recovered after failure. The zxDslEnvFanOperstatus object identifies the recovered Fan Operstatus. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.5 | NotificationzxDslEnvLossOfPower | current | This is device dying gasp event.It is generated when the device is power off or power failure. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.6 | NotificationzxDslEnvSwitchFailed | current | It is generated when the switch is Faild. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.7 | NotificationzxDslEnvSwitchRecovered | current | It is generated when the switch is Recovered. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.8 | NotificationzxDslEnvExteriorPowerFailed | current | It is generated when the Exterior Power is Faild. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.9 | NotificationzxDslEnvExteriorPowerRecovered | current | It is generated when the Exterior Power is Recovered. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.10 | NotificationzxDslEnvBatteriesVoltageFailed | current | It is generated when the Batteries Voltage is Faild. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.11 | NotificationzxDslEnvBatteriesVoltageRecovered | current | It is generated when the Batteries Voltage is Recovered. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.12 | NotificationzxDslEnvPowerFailed | current | It is generated when the Power is Faild. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.13 | NotificationzxDslEnvPowerRecovered | current | It is generated when the Power is Recovered. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.14 | NotificationzxDslEnvMonitorInterfaceLinkDown | current | It indicates that the agent has detected that the link at the enviroment monitoring inerface has been down. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.15 | NotificationzxDslEnvMonitorInterfaceLinkUp | current | It indicates that the agent has detected that the link at the enviroment monitoring inerface has been up. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.16 | NotificationzxDslTempUnderThreshTrap | current | It indicates that the zxDslEnvChassisTemperature is lower than zxDslEnvTemperatureLowerThreshold. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.17 | NotificationzxDslTempUnderThreshTrapCleared | current | It indicates that the zxDslTempUnderThreshTrap has Cleared. | |
| 1.3.6.1.4.1.3902.1004.3.2.8.18 | NotificationzxDslEnvFanFaultStateChangedTrap | current | This trap signifies that fault state of a fan has been changed. zxDslEnvFanFailedInfo indicates the failed fan list. zxDslEnvFanTotalNumber indicates the total… | |
| 1.3.6.1.4.1.3902.1004.3.2.20 | NotificationzxDslIfUplinkUp | current | The operational status of uplink interface changes to up. | |
| 1.3.6.1.4.1.3902.1004.3.2.21 | NotificationzxDslIfUplinkDown | current | The operational status of uplink interface changes to down. | |
| 1.3.6.1.4.1.3902.1004.3.2.22 | NotificationzxDslIfAccesslinkUp | current | The operational status of access link interface changes to up. | |
| 1.3.6.1.4.1.3902.1004.3.2.23 | NotificationzxDslIfAccesslinkDown | current | The operational status of access link interface changes to down. | |
| 1.3.6.1.4.1.3902.1004.3.2.24 | NotificationzxDslUnexpectedCardTypePlugin | current | A zxDslUnexpectedCardTypePlugin trap indicates that the card plug in the given slot is unexpected. For example, the ethernet user card can be plug in slot 2 of… | |
| 1.3.6.1.4.1.3902.1004.3.2.25 | NotificationzxDslUnexpectedCardTypePluginCleared | current | A zxDslUnexpectedCardTypePluginCleared trap indicates that the unexpected card plug-in is Recovered. For example, when ei8e card be unpluged from slot 3 of F82… | |
| 1.3.6.1.4.1.3902.1004.3.2.26 | NotificationzxDslMaxPortNumPerSlotChanged | current | A zxDslMaxPortNumPerSlotChanged trap indicates that the value of zxDslSysMaxPortNumPerSlot changed. | |
| 1.3.6.1.4.1.3902.1004.3.2.27 | NotificationzxDslCardChipDown | current | A zxDslCardChipDown trap indicates that the card is in abnormal status. | |
| 1.3.6.1.4.1.3902.1004.3.2.28 | NotificationzxDslCardChipDownCleared | current | A zxDslCardChipDownCleared trap indicates that the abnormal card is Recovered. | |
| 1.3.6.1.4.1.3902.1004.3.2.50 | NodezxDslSysSntpTrapGroup | |||
| 1.3.6.1.4.1.3902.1004.3.2.50.1 | NotificationzxDslSysSntpOffsetOverThreshTrap | current | zxDslSysSntpOffsetAlarmThreshold is reached. | |
| 1.3.6.1.4.1.3902.1004.3.2.50.2 | NotificationzxDslSysSntpOffsetUnderThreshTrap | current | zxDslSysSntpCurrentOffset is below zxDslSysSntpOffsetAlarmThreshold. | |
| 1.3.6.1.4.1.3902.1004.3.2.50.3 | NotificationzxDslSysSntpSynchFailed | current | Faied to synchronize time from SNTP server. | |
| 1.3.6.1.4.1.3902.1004.3.2.50.4 | NotificationzxDslSysSntpSynchFailedCleard | current | Cleared the alarm of zxDslSysSntpSynchFailed. | |
| 1.3.6.1.4.1.3902.1004.3.3 | NodezxDslSysCompatibility | |||
| 1.3.6.1.4.1.3902.1004.3.3.1 | ScalarzxDslSysCompatible | read-only | current | The compatibility of DSLAM. Every bit denotes the compatibility of some function. If the value of the bit is 1, the related function has compatible problem. Th… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |