ZXDS1-MIB
37 objects
The MIB module to describe DS1, E1, DS2, and E2 interfaces objects.
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TimeStamp TruthValue |
| ZTE-MASTER-MIB | zxPwCTDM |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1013.2.1.1 | IdentityzxDs1 | The MIB module to describe DS1, E1, DS2, and E2 interfaces objects. | ||
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1 | TablezxDsx1ConfigTable | not-accessible | current | The DS1 Configuration table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1 | RowzxDsx1ConfigEntry | not-accessible | current | An entry in the DS1 Configuration table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.1 | ColumnzxDsx1LineIndex | not-accessible | current | This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTa… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.2 | ColumnzxDsx1IfIndex | read-only | deprecated | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.3 | ColumnzxDsx1TimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the near end current error-measurement period. If, for some reason, such as an adjustment in the… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.4 | ColumnzxDsx1ValidIntervals | read-only | current | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, … |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.5 | ColumnzxDsx1LineType | read-write | current | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reaso… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.6 | ColumnzxDsx1LineCoding | read-write | current | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx1JBZS refers the… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.7 | ColumnzxDsx1SendCode | read-write | current | This variable indicates what type of code is being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code req… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.8 | ColumnzxDsx1CircuitIdentifier | read-write | current | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.9 | ColumnzxDsx1LoopbackConfig | read-write | current | This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in respon… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.10 | ColumnzxDsx1LineStatus | read-only | current | This variable indicates the Line Status of the interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The zxDsx1LineSt… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.11 | ColumnzxDsx1SignalMode | read-write | current | 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Signaling is in use. 'bitOriented' indicate… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.12 | ColumnzxDsx1TransmitClockSource | read-write | current | The source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.13 | ColumnzxDsx1Fdl | read-write | current | This bitmap describes the use of the facilities data link, and is the sum of the capabilities. Set any bits that are appropriate: other(1), dsx1AnsiT1403(2), d… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.14 | ColumnzxDsx1InvalidIntervals | read-only | current | The number of intervals in the range from 0 to zxDsx1ValidIntervals for which no data is available. This object will typically be zero except in cases where th… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.15 | ColumnzxDsx1LineLength | read-write | current | The length of the ds1 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configura… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.16 | ColumnzxDsx1LineStatusLastChange | read-only | current | The value of MIB II's sysUpTime object at the time this DS1 entered its current line status state. If the current state was entered prior to the last re-initia… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.17 | ColumnzxDsx1LineStatusChangeTrapEnable | read-write | current | Indicates whether dsx1LineStatusChange traps should be generated for this interface. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.18 | ColumnzxDsx1LoopbackStatus | read-only | current | This variable represents the current state of the loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely … |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.19 | ColumnzxDsx1Ds1ChannelNumber | read-only | current | This variable represents the channel number of the DS1/E1 on its parent DS2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 does not have a parent DS3/E3. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.20 | ColumnzxDsx1Channelization | read-write | current | Indicates whether this ds1/e1 is channelized or unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized into DS0s. The value of enabled… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.21 | ColumnzxDsx1LineMode | read-write | current | This setting puts the T1 framer into either long haul (CSU) mode or short haul (DSU) mode. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.22 | ColumnzxDsx1LineBuildOut | read-write | current | Attenuation setting for T1 framer in long haul (CSU) mode. The optional values are: -7.5dB, -15dB, -22.5dB and 0dB. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.23 | ColumnzxDsx1AdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.24 | ColumnzxDsx1OperStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.25 | ColumnzxDsx1ClockStatus | read-only | current | The current clock state of the interface. the value can be: FREERUN 0 HOLDOVER 1 ACQUIRING 2 ACUIRED 3 |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.26 | ColumnzxDsx1CfgInfoSend | read-write | current | The action to send the configuration on Ds1/E1 interface to corresponding card. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.27 | ColumnzxDsx1Retiming | read-write | current | Enable or disable Ds1/E1 interface retiming. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.28 | ColumnzxDsx1Impedance | read-write | current | |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.29 | ColumnzxDsx1FrameType | read-write | current | |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.30 | ColumnzxDsx1BER | read-only | current | |
| 1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.31 | ColumnzxDsx1ClockStatusTrapEnable | read-write | current | Indicates whether zxDsx1ClockStatus traps should be generated for this interface. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.100 | NodezxDsx1TrapObjects | |||
| 1.3.6.1.4.1.3902.1015.1013.2.1.100.1 | NotificationzxDsx1ClockStatusUnlock | current | A zxDsx1ClockStatusUnlock trap is sent when the current clock status of the interface has changed.NE system will automatically handle the trap jitter. | |
| 1.3.6.1.4.1.3902.1015.1013.2.1.100.2 | NotificationzxDsx1ClockStatusLock | current | A zxDsx1ClockStatusLock trap is sent when the current clock status of the interface is changeless and it was changed in the past.NE system will automatically h… |