ZXEPON-SERVICE-MIB
94 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1010.1.2 | Nodedot3MpcpObjects | |||
| 1.3.6.1.4.1.3902.1015.1010.1.2.1 | Tabledot3MpcpControlTable | not-accessible | current | A Table of dot3 Multi-Point Control Protocol (MPCP) MIB objects. The entries in the table are control and status objects of the MPCP. Each object has a row for… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1 | Rowdot3MpcpControlEntry | not-accessible | current | An entry in the dot3 MPCP Control table. Rows exist for an OLT interface and an ONU interface. A Row in the table is denoted by the ifIndex of the link and it … |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.1 | Columndot3MpcpOperStatus | read-only | current | This object reflects the operational state of the Multi-Point MAC Control sublayer, as defined in [802.3ah] clause 64. When the value is true(1) the interface … |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.2 | Columndot3MpcpAdminState | read-write | current | This object is used to define the admin state of the Multi-Point MAC Control sublayer, as defined in [802.3ah] clause 64, and to reflect its state. When select… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.3 | Columndot3MpcpMode | read-only | current | This object is used to identify the operational state of the Multi-Point MAC Control sublayer. Reading olt(1)for an OLT (server) mode and onu(2) for an ONU (cl… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.4 | Columndot3MpcpSyncTime | read-only | current | An object that reports the 'sync lock time' of the OLT receiver in increments of Time Quanta. The value returned shall be (sync lock time ns)/16. If this value… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.5 | Columndot3MpcpLinkID | read-only | current | An object that identifies the Logical Link identifier (LLID) associated with the MAC of the virtual link. This object is applicable for an OLT and an ONU. At t… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.6 | Columndot3MpcpRemoteMACAddress | read-only | current | An object that identifies the source_address parameter of the last MPCPDUs passed to the MAC Control. This value is updated on reception of a valid frame with … |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.7 | Columndot3MpcpRegistrationState | read-only | current | An object that identifies the registration state of the Multi-Point MAC Control sublayer. When this object has the enumeration unregistered(1) the interface is… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.8 | Columndot3MpcpTransmitElapsed | read-only | current | An object that reports the interval from last MPCP frame transmission in increments of Time Quanta (TQ)-16ns. The value returned shall be (interval from last M… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.9 | Columndot3MpcpReceiveElapsed | read-only | current | An object that reports the interval from last MPCP frame reception in increments of Time Quanta (TQ)-16ns. The value returned shall be (interval from last MPCP… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.10 | Columndot3MpcpRoundTripTime | read-only | current | An object that reports the MPCP round trip time in increments of Time Quanta (TQ)-16ns. The value returned shall be (round trip time in ns)/16. If this value e… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.1.1.11 | Columndot3MpcpMaximumPendingGrants | read-only | current | An object that reports the maximum number of grants which an ONU can store for handling. The maximum number of grants which an ONU can store for handling has a… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2 | Tabledot3MpcpStatTable | not-accessible | current | This table defines the list of statistics counters of an interface implementing the [802.3ah] clause 64 MPCP. Each object has a row for every virtual link deno… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1 | Rowdot3MpcpStatEntry | not-accessible | current | An entry in the table of statistics counters of the [802.3ah] clause 64 MPCP interface. Rows exist for an OLT interface and an ONU interface. A Row in the tabl… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.1 | Columndot3MpcpMACCtrlFramesTransmitted | read-only | current | A count of MPCP frames passed to the MAC sublayer for transmission. This counter is incremented when a MA_CONTROL.request service primitive is generated within… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.2 | Columndot3MpcpMACCtrlFramesReceived | read-only | current | A count of MPCP frames passed by the MAC sublayer to the MAC Control sublayer. This counter is incremented when a ReceiveFrame function call returns a valid fr… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.3 | Columndot3MpcpDiscoveryWindowsSent | read-only | current | A count of discovery windows generated. The counter is incremented by one for each generated discovery window. This object is applicable for an OLT and an ONU.… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.4 | Columndot3MpcpDiscoveryTimeout | read-only | current | A count of the number of times a discovery timeout occurs. Increment the counter by one for each discovery processing state-machine reset resulting from timeou… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.5 | Columndot3MpcpTxRegRequest | read-only | current | A count of the number of times a REGISTER_REQ MPCP frame transmission occurs. Increment the counter by one for each REGISTER_REQ MPCP frame transmitted as defi… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.6 | Columndot3MpcpRxRegRequest | read-only | current | A count of the number of times a REGISTER_REQ MPCP frame reception occurs. Increment the counter by one for each REGISTER_REQ MPCP frame received as defined in… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.7 | Columndot3MpcpTxRegAck | read-only | current | A count of the number of times a REGISTER_ACK MPCP frame transmission occurs. Increment the counter by one for each REGISTER_ACK MPCP frame transmitted as defi… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.8 | Columndot3MpcpRxRegAck | read-only | current | A count of the number of times a REGISTER_ACK MPCP frame reception occurs. Increment the counter by one for each REGISTER_ACK MPCP frame received, as defined i… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.9 | Columndot3MpcpTxReport | read-only | current | A count of the number of times a REPORT MPCP frame transmission occurs. Increment the counter by one for each REPORT MPCP frame transmitted as defined in [802.… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.10 | Columndot3MpcpRxReport | read-only | current | A count of the number of times a REPORT MPCP frame reception occurs. Increment the counter by one for each REPORT MPCP frame received, as defined in [802.3ah] … |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.11 | Columndot3MpcpTxGate | read-only | current | A count of the number of times a GATE MPCP frame transmission occurs. Increment the counter by one for each GATE MPCP frame transmitted, as defined in [802.3ah… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.12 | Columndot3MpcpRxGate | read-only | current | A count of the number of times a GATE MPCP frame reception occurs. Increment the counter by one for each GATE MPCP frame received, as defined in [802.3ah] clau… |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.13 | Columndot3MpcpTxRegister | read-only | current | A count of the number of times a REGISTER MPCP frame transmission occurs. Increment the counter by one for each REGISTER MPCP frame transmitted, as defined in … |
| 1.3.6.1.4.1.3902.1015.1010.1.2.2.1.14 | Columndot3MpcpRxRegister | read-only | current | A count of the number of times a REGISTER MPCP frame reception occurs. Increment the counter by one for each REGISTER MPCP frame received, as defined in [802.3… |
| 1.3.6.1.4.1.3902.1015.1010.1.3 | Nodedot3OmpEmulationObjects | |||
| 1.3.6.1.4.1.3902.1015.1010.1.3.1 | Tabledot3OmpEmulationTable | not-accessible | current | A table of dot3 OmpEmulation MIB objects. The table contain objects for the management of the OMPEmulation sublayer. Each object has a row for every virtual li… |
| 1.3.6.1.4.1.3902.1015.1010.1.3.1.1 | Rowdot3OmpEmulationEntry | not-accessible | current | An entry in the dot3 OmpEmulation table. Rows exist for an OLT interface and an ONU interface. A Row in the table is denoted by the ifIndex of the link and it … |
| 1.3.6.1.4.1.3902.1015.1010.1.3.1.1.1 | Columndot3OmpEmulationType | read-only | current | An object that indicates the mode of operation of the Reconciliation Sublayer for Point to Point Emulation (see [802.3ah] clause 65.1). unknown(1) value is ass… |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2 | Tabledot3OmpEmulationStatTable | not-accessible | current | This table defines the list of statistics counters of [802.3ah] clause 65 OMPEmulation sublayer. Each object has a row for every virtual link denoted by the co… |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1 | Rowdot3OmpEmulationStatEntry | not-accessible | current | An entry in the table of statistics counters of [802.3ah] clause 65 OMPEmulation sublayer. Rows exist for an OLT interface and an ONU interface. A Row in the t… |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.1 | Columndot3OmpEmulationSLDErrors | read-only | current | A count of frames received that do not contain a valid SLD field as defined in [802.3ah] clause 65.1.3.3.1. This object is applicable for an OLT and an ONU. At… |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.2 | Columndot3OmpEmulationCRC8Errors | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, but do not pass the CRC-8 check as defined in [802.3ah] c… |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.3 | Columndot3OmpEmulationBadLLID | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause … |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.4 | Columndot3OmpEmulationGoodLLID | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause … |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.5 | Columndot3OmpEmulationOnuPonCastLLID | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] 65.1.3.3.1, pass the CRC-8 check, as defined in [802.3ah] 65.1.3.3.3, and th… |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.6 | Columndot3OmpEmulationOltPonCastLLID | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] 65.1.3.3.1, pass the CRC-8 check, as defined in [802.3ah] 65.1.3.3.3, and th… |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.7 | Columndot3OmpEmulationBroadcastBitNotOnuLlid | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause … |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.8 | Columndot3OmpEmulationOnuLLIDNotBroadcast | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause … |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.9 | Columndot3OmpEmulationBroadcastBitPlusOnuLlid | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause … |
| 1.3.6.1.4.1.3902.1015.1010.1.3.2.1.10 | Columndot3OmpEmulationNotBroadcastBitNotOnuLlid | read-only | current | A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause … |
| 1.3.6.1.4.1.3902.1015.1010.1.4 | Nodedot3EponFecObjects | |||
| 1.3.6.1.4.1.3902.1015.1010.1.4.1 | Tabledot3EponFecTable | not-accessible | current | A table of dot3 EPON FEC management objects. The entries in the table are control and status objects and statistic counters for the FEC layer. Each object has … |
| 1.3.6.1.4.1.3902.1015.1010.1.4.1.1 | Rowdot3EponFecEntry | not-accessible | current | An entry in the dot3 EPON FEC table. Rows exist for an OLT interface and an ONU interface. A Row in the table is denoted by the ifIndex of the link and it is c… |
| 1.3.6.1.4.1.3902.1015.1010.1.4.1.1.1 | Columndot3EponFecPCSCodingViolation | read-only | current | For 100 Mbps operation it is a count of the number of times an invalid code-group is received, other than the /H/ code-group. For 1000 Mbps operation it is a c… |
| 1.3.6.1.4.1.3902.1015.1010.1.4.1.1.2 | Columndot3EponFecAbility | read-only | current | An object that indicates the support of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2. unknown(1) value is … |
| 1.3.6.1.4.1.3902.1015.1010.1.4.1.1.3 | Columndot3EponFecMode | read-write | current | An object that defines the mode of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2, and reflects its state. A… |
| 1.3.6.1.4.1.3902.1015.1010.1.4.1.1.4 | Columndot3EponFecCorrectedBlocks | read-only | current | For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs it is a count of corrected FEC blocks. This counter will not increment for other PHY Types. Increment the counter … |
| 1.3.6.1.4.1.3902.1015.1010.1.4.1.1.5 | Columndot3EponFecUncorrectableBlocks | read-only | current | For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs it is a count of uncorrectable FEC blocks. This counter will not increment for other PHY Types. Increment the coun… |
| 1.3.6.1.4.1.3902.1015.1010.1.4.1.1.6 | Columndot3EponFecBufferHeadCodingViolation | read-only | current | For 1000 Mbps operation it is a count of the number of invalid code-group received directly from the link. The value has a meaning only in 1000 Mbps mode and i… |
| 1.3.6.1.4.1.3902.1015.1010.1.5 | Nodedot3ExtPkgObjects | |||
| 1.3.6.1.4.1.3902.1015.1010.1.5.1 | Nodedot3ExtPkgControlObjects | |||
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.1 | Tabledot3ExtPkgControlTable | not-accessible | current | A table of dot3 EPON FEC management objects. The entries in the table are control and status objects and statistic counters for the FEC layer. Each object has … |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1 | Rowdot3ExtPkgControlEntry | not-accessible | current | An entry in the Extended package Control table. Rows exist for an OLT interface and an ONU interface. A Row in the table is denoted by the ifIndex of the link … |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.1 | Columndot3ExtPkgObjectReset | read-write | current | This object is used to reset the EPON interface. The interface may be unavailable while the reset occurs and data may be lost. Setting this object to running(1… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.2 | Columndot3ExtPkgObjectPowerDown | read-write | current | This object is used to power down the EPON interface. The interface may be unavailable while the power down occurs and data may be lost. Setting this object to… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.3 | Columndot3ExtPkgObjectNumberOfLLIDs | read-only | current | A read only object which indicates the number of registered LLIDs. Initialization value is 0. This object is applicable for an OLT, with the same value for all… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.4 | Columndot3ExtPkgObjectFecEnabled | read-write | current | An object defining the FEC mode of operation of the interface, and indicating its state. The modes defined in this object are extensions to the FEC modes defin… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.5 | Columndot3ExtPkgObjectReportMaximumNumQueues | read-only | current | An object, that defines the maximal number of queues in the REPORT message, as defined in [802.3ah] 64. For further information please see the description of t… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.6 | Columndot3ExtPkgObjectRegisterAction | read-write | current | An object configuring the registration state of an interface, and indicating its registration state. Write operation changes the registration state to its new … |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.2 | Tabledot3ExtPkgQueueTable | not-accessible | current | A table of the extended package objects for queue management. The [802.3ah] MPCP defines a report message of the occupancy of the transmit queues for the feedb… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.2.1 | Rowdot3ExtPkgQueueEntry | not-accessible | current | An entry in the Extended package Queue table. At the OLT, the rows exist for each ifIndex and QueueIndex. At the ONU, rows exist for the single ifIndex for eac… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.2.1.1 | Columndot3QueueIndex | not-accessible | current | An object that identifies an index for the queue table reflecting the queue index of the queues which are reported in the MPCP REPORT message, as defined in [8… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.2.1.2 | Columndot3ExtPkgObjectReportNumThreshold | read-write | current | An object that defines the number of thresholds for each queue in the REPORT message, as defined in [802.3ah] clause 64. Each queue_set reporting will provide … |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.2.1.3 | Columndot3ExtPkgObjectReportMaximumNumThreshold | read-only | current | An object, that defines the maximal number of thresholds for each queue in the REPORT message, as defined in [802.3ah] clause 64. Each queue_set reporting will… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.2.1.4 | Columndot3ExtPkgStatTxFramesQueue | read-only | current | A count of the number of times a frame transmission occurs from the corresponding 'Queue'. Increment the counter by one for each frame transmitted which is an … |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.2.1.5 | Columndot3ExtPkgStatRxFramesQueue | read-only | current | A count of the number of times a frame reception occurs from the corresponding 'Queue'. Increment the counter by one for each frame received which is an input … |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.2.1.6 | Columndot3ExtPkgStatDroppedFramesQueue | read-only | current | A count of the number of times a frame drop occurs from the corresponding 'Queue'. Increment the counter by one for each frame dropped from the corresponding '… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.3 | Tabledot3ExtPkgQueueSetsTable | not-accessible | current | A table of Extended package objects used for the management of the queue_sets. Entries are control and status indication objects of an EPON interface which are… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.3.1 | Rowdot3ExtPkgQueueSetsEntry | not-accessible | current | An entry in the Extended package queue_set table. At the OLT, the rows exist for each ifIndex, QueueSetQueueIndex and QueueSetIndex. At the ONU, rows exist for… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.3.1.1 | Columndot3QueueSetQueueIndex | not-accessible | current | An object that identifies the queue index for the ExtPkgQueueSetsTable table. The queues are reported in the MPCP REPORT message as defined in [802.3ah] clause… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.3.1.2 | Columndot3QueueSetIndex | not-accessible | current | An object that identifies the queue_set index for the ExtPkgQueueSetsTable table. The queues are reported in the MPCP REPORT message as defined in [802.3ah] cl… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.3.1.3 | Columndot3ExtPkgObjectReportThreshold | read-write | current | An object that defines the value of threshold report for each queue_set in the REPORT message, as defined in [802.3ah] clause 64. The number of sets for each q… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5 | Tabledot3ExtPkgOptIfTable | not-accessible | current | This table defines the control and status indication objects for the optical interface of the EPON interface. Each object has a row for every virtual link deno… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1 | Rowdot3ExtPkgOptIfEntry | not-accessible | current | An entry in the optical interface table of the EPON interface. Rows exist for an OLT interface and an ONU interface. A Row in the table is denoted by the ifInd… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.1 | Columndot3ExtPkgOptIfSuspectedFlag | read-only | current | This object is a reliability indication. If true, the data in this entry may be unreliable. This object is applicable for an OLT and an ONU. At the OLT it has … |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.2 | Columndot3ExtPkgOptIfInputPower | read-only | current | The optical power monitored at the input. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface. |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.3 | Columndot3ExtPkgOptIfLowInputPower | read-only | current | The lowest optical power monitored at the input during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT it has a dis… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.4 | Columndot3ExtPkgOptIfHighInputPower | read-only | current | The highest optical power monitored at the input during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT it has a di… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.5 | Columndot3ExtPkgOptIfLowerInputPowerThreshold | read-write | current | The lower limit threshold on input power. If ExtPkgOptIfInputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. Reading will … |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.6 | Columndot3ExtPkgOptIfUpperInputPowerThreshold | read-write | current | The upper limit threshold on input power. If ExtPkgOptIfInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading will… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.7 | Columndot3ExtPkgOptIfOutputPower | read-only | current | The optical power monitored at the output. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface. |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.8 | Columndot3ExtPkgOptIfLowOutputPower | read-only | current | The lowest optical power monitored at the output during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT it has a di… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.9 | Columndot3ExtPkgOptIfHighOutputPower | read-only | current | The highest optical power monitored at the output during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT it has a d… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.10 | Columndot3ExtPkgOptIfLowerOutputPowerThreshold | read-write | current | The lower limit threshold on output power. If ExtPkgOptIfOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. Reading wil… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.11 | Columndot3ExtPkgOptIfUpperOutputPowerThreshold | read-write | current | The upper limit threshold on output power. If ExtPkgOptIfOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading wi… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.12 | Columndot3ExtPkgOptIfSignalDetect | read-only | current | When getting true(1) there is a valid optical signal at the receive, that is above the optical power level for signal detection. When getting false(2) the opti… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.13 | Columndot3ExtPkgOptIfTransmitAlarm | read-only | current | When getting true(1) there is a non-valid optical signal at the transmit of the interface, either a higher level or lower level than expected. When getting fal… |
| 1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.14 | Columndot3ExtPkgOptIfTransmitEnable | read-write | current | Setting this object to true(1) will cause the optical interface to start transmission (according to the control protocol specified for the logical interface). … |