ZXGPON-SERVICE-MIB
1137 objects
The MIB module for defining ZXGPON base OID. OID programming: zxGponRootMib 1 , index(zxGponMgmtIndex) zxGponRootMib 2-5 , reserve zxGponRootMib 6 , Absolut private MIB(zxGponAbsPrivate) zxGponRootMib 7-9 , reserve zxGponRootMib 10 , Standard global MIB(zxGponStandardGlobal) zxGponRootMib 11 , Private global MIB(zxGponPrivateGlobal) zxGponRootMib 12 , Standard OLT MIB(zxGponStandardOlt) zxGponRootMib 13 , Private OLT MIB(zxGponPrivateOlt) zxGponRootMib 14-20 , reserve zxGponRootMib 21 , ONT equipment management(zxGponOntEquipMgmt) zxGponRootMib 22 , ANI management(zxGponAniMgmt) zxGponRootMib 23 , UNI Management(zxGponUniMgmt) zxGponRootMib 24 , Connection Management(zxGponConnMgmt) zxGponRootMib 25 , Traffic management(zxGponTrafficMgmt) zxGponRootMib 26 , Profile management(zxGponProfileMgmt) zxGponRootMib 27 , Standard ONU MIB(zxGponStandardOnu) zxGponRootMib 28 , Private ONU MIB(zxGponPrivateOnu) zxGponRootMib 30 , Service management MIB(zxGponServiceMgmt) zxGponRootMib 45 , Private TRAP MIB(zxGponTraps) zxGponRootMib 100 , Dummy MIB indicating the termination of gpon mibs(zxGponTermination) zxGponUniMgmt 1-5 , reserve zxGponUniMgmt 6 , Video Service MIB(zxGponUniVideoService) zxGponUniMgmt 7 , TDM Service MIB(zxGponUniTdmService) zxGponUniMgmt 8 , Ethernet Service MIB(zxGponUniEthService) zxGponUniMgmt 9 , CES MIB(zxGponUniCesService)
Imported Objects
| RFC1155-SMI | enterprises |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | Counter64 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | NodezxEnterpriseMib | |||
| 1.3.6.1.4.1.3902.1012 | NodezxPON | |||
| 1.3.6.1.4.1.3902.1012.3 | IdentityzxGponRootMib | The MIB module for defining ZXGPON base OID. OID programming: zxGponRootMib 1 , index(zxGponMgmtIndex) zxGponRootMib 2-5 , reserve zxGponRootMib 6 , Absolut pr… | ||
| 1.3.6.1.4.1.3902.1012.3.1 | NodezxGponMgmtIndex | |||
| 1.3.6.1.4.1.3902.1012.3.1.1 | TablezxGponOltOnuTable | not-accessible | current | OLT and ONU table. |
| 1.3.6.1.4.1.3902.1012.3.1.1.1 | RowzxGponOltOnuEntry | not-accessible | current | An entry in the OLT and ONU table. |
| 1.3.6.1.4.1.3902.1012.3.1.1.1.1 | ColumnzxGponMgmtPonOltId | read-only | current | OLT identifier, from 1 to N. bit 31~28?atype(1) bit 27~24?ashelf(0) bit 23~16?aslotId bit 16~8?aoltId bit 7~0?areserved(0) |
| 1.3.6.1.4.1.3902.1012.3.1.1.1.2 | ColumnzxGponMgmtPonOnuId | read-only | current | an ONU in an OLT, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.1.1.1.3 | ColumnzxGponMgmtPonEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.2 | ScalarzxAnGponRevision | read-only | current | Module revision flag. |
| 1.3.6.1.4.1.3902.1012.3.11 | NodezxGponPrivateGlobal | |||
| 1.3.6.1.4.1.3902.1012.3.11.1 | TablezxGponOltDevInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.1.1 | RowzxGponOltDevInfoEntry | not-accessible | current | It is entry in the zxGponOltDevInfoTable. |
| 1.3.6.1.4.1.3902.1012.3.11.1.1.1 | ColumnzxGponDbaEnable | read-write | current | Enable or disable DBA on this olt . |
| 1.3.6.1.4.1.3902.1012.3.11.3 | TablezxGponFECTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.3.1 | RowzxGponFECEntry | not-accessible | current | It is entry in the zxGponFECTable. |
| 1.3.6.1.4.1.3902.1012.3.11.3.1.1 | ColumnzxGponFECMode | read-write | current | Indicates the FEC mode on this olt . |
| 1.3.6.1.4.1.3902.1012.3.11.4 | TablezxGponRTDTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.4.1 | RowzxGponRTDEntry | not-accessible | current | It is entry in the zxGponRTDTable. |
| 1.3.6.1.4.1.3902.1012.3.11.4.1.1 | ColumnzxGponRTDEqd | read-only | current | Equalized delay of onu. |
| 1.3.6.1.4.1.3902.1012.3.11.4.1.2 | ColumnzxGponRTDDistance | read-only | current | Distance of onu. |
| 1.3.6.1.4.1.3902.1012.3.11.5 | TablezxGponRangeTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.5.1 | RowzxGponRangeEntry | not-accessible | current | It is entry in the zxGponRangeTable. |
| 1.3.6.1.4.1.3902.1012.3.11.5.1.1 | ColumnzxGponRangeMode | read-write | current | Indicates the range mode of this olt . mode0(1): 0 - 20 km mode1(2): 20 - 40 km mode2(3): 40 - 60 km |
| 1.3.6.1.4.1.3902.1012.3.11.5.1.2 | ColumnzxGponRangeBase | read-write | current | It indicates value of the base distance of the range. The distance of the range is [zxGponRangeBase,zxGponRangeBase + zxGponRangeDiff], The max distance of the… |
| 1.3.6.1.4.1.3902.1012.3.11.5.1.3 | ColumnzxGponRangeDiff | read-write | current | It indicates the distance of the range coverage area. |
| 1.3.6.1.4.1.3902.1012.3.11.5.1.4 | ColumnzxGponRangeCapability | read-only | current | Indicates the range capability. fixed(1): zxGponRangeMode working,only support 0-20,20-40,40-60 step(2): zxGponRangeBase and zxGponRangeDiff working |
| 1.3.6.1.4.1.3902.1012.3.11.9 | TablezxGponPonFloodBandwidthInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.9.1 | RowzxGponPonFloodBandwidthInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.9.1.1 | ColumnzxGponPonFloodBandwidth | read-write | current | 64-2609192 kbps |
| 1.3.6.1.4.1.3902.1012.3.11.10 | TablezxGponPonMCastBandwidthInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.10.1 | RowzxGponPonMCastBandwidthInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.10.1.1 | ColumnzxGponPonMCastTotalBandwidth | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.11.11 | TablezxGponSCBMCastGroupTable | not-accessible | current | This table represents SCB multicast configuration. |
| 1.3.6.1.4.1.3902.1012.3.11.11.1 | RowzxGponSCBMCastGroupEntry | not-accessible | current | It provide a SCB multicast configuration entry. |
| 1.3.6.1.4.1.3902.1012.3.11.11.1.1 | ColumnzxGponSCBMCastGroupIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.11.1.2 | ColumnzxGponSCBMCastGroupName | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.11.11.1.3 | ColumnzxGponSCBMCastMgmtPortID | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.11.11.1.4 | ColumnzxGponSCBMCastGroupDownBWPtr | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.11.11.1.5 | ColumnzxGponSCBMCastRealPortID | read-only | current | If 'zxGponSCBMCastMgmtPortID' is the real gpon portid, it is equal to the 'zxGponSCBMCastMgmtPortID' |
| 1.3.6.1.4.1.3902.1012.3.11.11.1.6 | ColumnzxGponSCBMCastOntListIdx | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.11.1.7 | ColumnzxGponSCBMCastEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.11.12 | TablezxGponSCBMCastOntTable | not-accessible | current | This table represents SCB multicast configuration in ONT. |
| 1.3.6.1.4.1.3902.1012.3.11.12.1 | RowzxGponSCBMCastOntEntry | not-accessible | current | It provide a SCB multicast configuration entry. |
| 1.3.6.1.4.1.3902.1012.3.11.12.1.1 | ColumnzxGponSCBMCastOntSetIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.12.1.2 | ColumnzxGponSCBMCastOntSetGroupIdx | read-write | current | It is equal to zxGponSCBMCastGroupIdx. |
| 1.3.6.1.4.1.3902.1012.3.11.12.1.3 | ColumnzxGponSCBMCastOntList | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.11.12.1.4 | ColumnzxGponSCBMCastOntEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.11.13 | TablezxGponPonBroadCastBandwidthInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.13.1 | RowzxGponPonBroadCastBandwidthInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.13.1.1 | ColumnzxGponPonBroadCastBandwidth | read-write | current | 64-2609192 kbps |
| 1.3.6.1.4.1.3902.1012.3.11.14 | TablezxGponPonPeakBandwidthInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.14.1 | RowzxGponPonPeakBandwidthInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.14.1.1 | ColumnzxGponPonPeakBandwidth | read-write | current | 64-2609192 kbps |
| 1.3.6.1.4.1.3902.1012.3.11.16 | TablezxGponGetValidIdxTable | not-accessible | current | This table represents current valid index table. |
| 1.3.6.1.4.1.3902.1012.3.11.16.1 | RowzxGponGetValidIdxEntry | not-accessible | current | It provide a current valid index entry. |
| 1.3.6.1.4.1.3902.1012.3.11.16.1.1 | ColumnzxGponGetValidIdxTableNameIdx | not-accessible | current | It is a table name ID, specifical number denotes one table. Only these tables are valid in which it is only one integer index. GPON_TBLID_BWPROFILE 1 GPON_TBLI… |
| 1.3.6.1.4.1.3902.1012.3.11.16.1.2 | ColumnzxGponGetValidIdxvalue | read-only | current | It is a valid in the table. |
| 1.3.6.1.4.1.3902.1012.3.11.20 | TablezxGponSpiIfPmTable | not-accessible | current | This table represents SPI PM table. |
| 1.3.6.1.4.1.3902.1012.3.11.20.1 | RowzxGponSpiIfPmEntry | not-accessible | current | It provide a GE port SPI PM entry. |
| 1.3.6.1.4.1.3902.1012.3.11.20.1.1 | ColumnzxGponSpiIfRxFrm | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.20.1.2 | ColumnzxGponSpiIfRxByte | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.20.1.3 | ColumnzxGponSpiIfRxDiscardFrm | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.20.1.4 | ColumnzxGponSpiIfRxDiscardByte | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.20.1.5 | ColumnzxGponSpiIfTxFrm | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.20.1.6 | ColumnzxGponSpiIfTxByte | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.20.1.7 | ColumnzxGponSpiIfTxDiscardFrm | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.20.1.8 | ColumnzxGponSpiIfTxDiscardByte | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.11.21 | TablezxGponPonScheduleModeInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.21.1 | RowzxGponPonScheduleModeInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.21.1.1 | ColumnzxGponMgmtPonSlotId | not-accessible | current | slot id(1-6,9-14) |
| 1.3.6.1.4.1.3902.1012.3.11.21.1.2 | ColumnzxGponPonScheduleMode | read-write | current | 1:onuOrGemport 2:PON |
| 1.3.6.1.4.1.3902.1012.3.11.22 | TablezxGponPon802Dot1pMapInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.22.1 | RowzxGponPon802Dot1pMapInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.22.1.1 | ColumnzxGponPonDot1pMapQueue0 | read-write | current | Cos Queue No Dot1p Map to,value range [0..7] |
| 1.3.6.1.4.1.3902.1012.3.11.22.1.2 | ColumnzxGponPonDot1pMapQueue1 | read-write | current | Cos Queue No Dot1p Map to,value range [0..7] |
| 1.3.6.1.4.1.3902.1012.3.11.22.1.3 | ColumnzxGponPonDot1pMapQueue2 | read-write | current | Cos Queue No Dot1p Map to,value range [0..7] |
| 1.3.6.1.4.1.3902.1012.3.11.22.1.4 | ColumnzxGponPonDot1pMapQueue3 | read-write | current | Cos Queue No Dot1p Map to,value range [0..7] |
| 1.3.6.1.4.1.3902.1012.3.11.22.1.5 | ColumnzxGponPonDot1pMapQueue4 | read-write | current | Cos Queue No Dot1p Map to,value range [0..7] |
| 1.3.6.1.4.1.3902.1012.3.11.22.1.6 | ColumnzxGponPonDot1pMapQueue5 | read-write | current | Cos Queue No Dot1p Map to,value range [0..7] |
| 1.3.6.1.4.1.3902.1012.3.11.22.1.7 | ColumnzxGponPonDot1pMapQueue6 | read-write | current | Cos Queue No Dot1p Map to,value range [0..7] |
| 1.3.6.1.4.1.3902.1012.3.11.22.1.8 | ColumnzxGponPonDot1pMapQueue7 | read-write | current | Cos Queue No Dot1p Map to,value range [0..7] |
| 1.3.6.1.4.1.3902.1012.3.11.23 | TablezxGponPonWeightMgmtInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.23.1 | RowzxGponPonWeightMgmtInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.23.1.1 | ColumnzxGponPonWeightMgmtQueue0 | read-write | current | queue0 weight value[0..255] |
| 1.3.6.1.4.1.3902.1012.3.11.23.1.2 | ColumnzxGponPonWeightMgmtQueue1 | read-write | current | queue1 weight value[0..255] |
| 1.3.6.1.4.1.3902.1012.3.11.23.1.3 | ColumnzxGponPonWeightMgmtQueue2 | read-write | current | queue2 weight value[0..255] |
| 1.3.6.1.4.1.3902.1012.3.11.23.1.4 | ColumnzxGponPonWeightMgmtQueue3 | read-write | current | queue3 weight value[0..255] |
| 1.3.6.1.4.1.3902.1012.3.11.23.1.5 | ColumnzxGponPonWeightMgmtQueue4 | read-write | current | queue4 weight value[0..255] |
| 1.3.6.1.4.1.3902.1012.3.11.23.1.6 | ColumnzxGponPonWeightMgmtQueue5 | read-write | current | queue5 weight value[0..255] |
| 1.3.6.1.4.1.3902.1012.3.11.23.1.7 | ColumnzxGponPonWeightMgmtQueue6 | read-write | current | queue6 weight value[0..255] |
| 1.3.6.1.4.1.3902.1012.3.11.23.1.8 | ColumnzxGponPonWeightMgmtQueue7 | read-write | current | queue7 weight value[0..255] |
| 1.3.6.1.4.1.3902.1012.3.11.24 | TablezxGponFloodBroadCastEnableInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.24.1 | RowzxGponFloodBroadCastEnableInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.24.1.1 | ColumnzxGponFloodEnable | read-write | current | 1:enalbe 2:disable |
| 1.3.6.1.4.1.3902.1012.3.11.24.1.2 | ColumnzxGponBroadcastEnable | read-write | current | 1:enable 2:disable |
| 1.3.6.1.4.1.3902.1012.3.11.25 | TablezxGponSlotOpticalDetectInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.25.1 | RowzxGponSlotOpticalDetectInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.11.25.1.1 | ColumnzxGponSlotOpticalDetect | read-write | current | enable/disable pon Optical-Always-On detection. |
| 1.3.6.1.4.1.3902.1012.3.11.40 | ScalarzxGponPortLocOnuIdFormat | read-write | current | Configure DHCP Option82 ONU ID and PPPOE Plus ONU ID Format. |
| 1.3.6.1.4.1.3902.1012.3.12 | NodezxGponStandardOlt | |||
| 1.3.6.1.4.1.3902.1012.3.12.1 | TablezxGponOltInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.1.1 | RowzxGponOltInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.1.1.1 | ColumnzxGponOltInfoPONTransRateType | read-only | current | This attribute indicate not the actual bytes rate, but the base transfer type. the map of ratetype and actual bytes rate as blow: ratetype1(1) ratetype2(2) rat… |
| 1.3.6.1.4.1.3902.1012.3.12.1.1.2 | ColumnzxGponOltInfoOpticalTransceiverType | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.1.1.3 | ColumnzxGponOltInfoOntMgmtMode | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.1.1.4 | ColumnzxGponOltInfoCurrentStatus | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.1.1.5 | ColumnzxGponOltInfoFECEnable | read-only | current | Support ability, FEC |
| 1.3.6.1.4.1.3902.1012.3.12.1.1.6 | ColumnzxGponOltInfoDBAEnable | read-only | current | Support ability, DBA |
| 1.3.6.1.4.1.3902.1012.3.12.2 | TablezxGponOltStatisticInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.2.1 | RowzxGponOltStatisticInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.2.1.1 | ColumnzxGponOltStatisticInfoSuperframeCounter | read-only | current | To provide error tolerance, the OLT must implement a local superframe counter |
| 1.3.6.1.4.1.3902.1012.3.12.2.1.2 | ColumnzxGponOltStatisticInfoBIPCounter | read-only | current | The received BIP8 is compared with the calculated BIP8 on the received stream. In case of a difference ERR counter is incremented |
| 1.3.6.1.4.1.3902.1012.3.12.3 | TablezxGponDownFrameInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.3.1 | RowzxGponDownFrameInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.3.1.1 | ColumnzxGponDownFrameInfoServices | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.3.1.2 | ColumnzxGponDownFrameInfoSIMinGranularity | read-write | current | The pointers are given in units of bytes, allowing the OLT to control the medium at an effective static bandwidth granularity of 64 kbit/s. |
| 1.3.6.1.4.1.3902.1012.3.12.3.1.3 | ColumnzxGponDownFrameInfoDbaMethod | read-write | current | This attribute present the method of DBA(Dynamic Bandwidth Assignment), it value can be either sr(Status Reporting) or nsr(Non Status Reporting) |
| 1.3.6.1.4.1.3902.1012.3.12.3.1.4 | ColumnzxGponDownFrameInfoScramblingEnable | read-write | current | This attribute is used to activate/deactivate the ATM cell scrambling function. This attribute is only present for ATM interfaces where ATM cell scrambling may… |
| 1.3.6.1.4.1.3902.1012.3.12.3.1.5 | ColumnzxGponDownFrameInfoFECEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.3.1.6 | ColumnzxGponDownFrameInfoOnuSendDBRuMode | read-write | current | Depending on the contents of these value, the ONU will send the DBRu corresponding to the allocation ID or not. The code points defined are: 1: Do not send DBR… |
| 1.3.6.1.4.1.3902.1012.3.12.4 | TablezxGponOltPmStatisticInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1 | RowzxGponOltPmStatisticInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.1 | ColumnzxGponOltPmStatisticInfoGemPacketTx | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.2 | ColumnzxGponOltPmStatisticInfoGemPacketRxCorIdle | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.3 | ColumnzxGponOltPmStatisticInfoGemPacketRxCorNoIdle | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.4 | ColumnzxGponOltPmStatisticInfoGemPacketRxErr | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.5 | ColumnzxGponOltPmStatisticInfoGemPayloadBytesRx | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.6 | ColumnzxGponOltPmStatisticInfoEthPacketTx | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.7 | ColumnzxGponOltPmStatisticInfoEthPacketRxCor | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.8 | ColumnzxGponOltPmStatisticInfoEthPacketRxErr | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.9 | ColumnzxGponOltPmStatisticInfoOmciPacketTx | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.10 | ColumnzxGponOltPmStatisticInfoOmciPacketRxCor | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.11 | ColumnzxGponOltPmStatisticInfoOmciPacketRxErr | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.12 | ColumnzxGponOltPmStatisticInfoPloamTx | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.13 | ColumnzxGponOltPmStatisticInfoPloamRxCor | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.14 | ColumnzxGponOltPmStatisticInfoPloamRxErr | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.15 | ColumnzxGponOltPmStatisticInfoERR | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.4.1.16 | ColumnzxGponOltPmStatisticInfoREI | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.7 | TablezxGponFindOnuTimerTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.7.1 | RowzxGponFindOnuTimerEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.7.1.1 | ColumnzxGPonFindOnuTimerNewOnt | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.7.1.2 | ColumnzxGponFindOnuTimerMissingOnt | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.7.1.3 | ColumnzxGPonFindOnuTimerOpenWindowFrame | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.8 | TablezxGponOltAlarmTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.8.1 | RowzxGponOltAlarmEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.8.1.1 | ColumnzxGPonOltAlarmLos | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.8.1.2 | ColumnzxGponOltAlarmLosMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.8.1.3 | ColumnzxGponOltAlarmTF | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.8.1.4 | ColumnzxGponOltAlarmTFMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.9 | TablezxGponOntUpAlarmOltSideTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.9.1 | RowzxGponOntUpAlarmOltSideEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.1 | ColumnzxGponOntUpAlarmOltSideLOSui | read-only | current | Loss of signal for ONUi Detection condition : No valid optical signal from ONU when it was expected during M consecutive frames. (M is configurable. Recommende… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.2 | ColumnzxGponOntUpAlarmOltSideLOSuiMask | read-write | current | Loss of signal for ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.3 | ColumnzxGponOntUpAlarmOltSideLOFui | read-only | current | Loss of Frame of ONUi Detection condition : When 4 consecutive invalid delimiters from ONUi are received. Action : Send 3 times Deactivate_ONU-ID messages. Gen… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.4 | ColumnzxGponOntUpAlarmOltSideLOFuiMask | read-write | current | Loss of Frame of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.5 | ColumnzxGponOntUpAlarmOltSideDOWui | read-only | current | Drift of Window of ONUi Detection condition : An ONU transmission is received at an unexpected place within the U/S virtual frame. DOWi means the phase has shi… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.6 | ColumnzxGponOntUpAlarmOltSideDOWuiMask | read-write | current | Drift of Window of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.7 | ColumnzxGponOntUpAlarmOltSideSFui | read-only | current | Signal Fail of ONUi Detection condition : When the upstream BER of ONUi becomes ?10?y, this state is entered. Y is configurable in the range of 3 to 8 Action :… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.8 | ColumnzxGponOntUpAlarmOltSideSFuiMask | read-write | current | Signal Fail of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.9 | ColumnzxGponOntUpAlarmOltSideSDui | read-only | current | Signal Degraded of ONUi Detection condition : When the upstream BER of ONUi becomes ?10?x, this state is entered. X is configurable in the range of 4 to 9. But… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.10 | ColumnzxGponOntUpAlarmOltSideSDuiMask | read-write | current | Signal Degraded of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.11 | ColumnzxGponOntUpAlarmOltSideLCDAui | read-only | current | Loss of ATM channel delineation Detection condition : When 8 consecutive invalid HECs from ONUi are received. Action : Send 3 times Deactivate_ONU-ID messages,… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.12 | ColumnzxGponOntUpAlarmOltSideLCDAuiMask | read-write | current | Loss of ATM channel delineation mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.13 | ColumnzxGponOntUpAlarmOltSideLCDGui | read-only | current | Loss of GEM channel delineation Detection condition : GEM Channel could not be delineated during 3 consecutive frames. Action : Send 3 times Deactivate_ONU-ID … |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.14 | ColumnzxGponOntUpAlarmOltSideLCDGuiMask | read-write | current | Loss of GEM channel delineation mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.15 | ColumnzxGponOntUpAlarmOltSideRDIui | read-only | current | Remote Defect Indication of ONUi Detection condition : When the RDI field of ONUi is asserted. The OLT transmission is received with defects at the ONUi Action… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.16 | ColumnzxGponOntUpAlarmOltSideRDIuiMask | read-write | current | Remote Defect Indication of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.17 | ColumnzxGponOntUpAlarmOltSideSUFui | read-only | current | Start-up Failure of ONUi Detection condition : The ranging of ONUi has failed n times (n = 2) while the OLT has received optical bursts from this ONU Action : … |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.18 | ColumnzxGponOntUpAlarmOltSideSUFuiMask | read-write | current | Start-up Failure of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.19 | ColumnzxGponOntUpAlarmOltSideDFui | read-only | current | Deactivate Failure of ONUi Detection condition : The ONU does not react correctly after three Deactivate_ONU-ID messages. Action : Cancel condition : Cancelled… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.20 | ColumnzxGponOntUpAlarmOltSideDFuiMask | read-write | current | Deactivate Failure of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.21 | ColumnzxGponOntUpAlarmOltSideLOAui | read-only | current | Loss of Acknowledge with ONUi Detection condition : The OLT does not receive an acknowledgement from ONUi after a set of downstream messages that imply an upst… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.22 | ColumnzxGponOntUpAlarmOltSideLOAuiMask | read-write | current | Loss of Acknowledge with ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.23 | ColumnzxGponOntUpAlarmOltSideDGui | read-only | current | Receive Dying-Gasp of ONUi Detection condition : When the OLT receives DG message from ONUi, DGi is asserted. Action : Ignore received alarms from this ONU. Ge… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.24 | ColumnzxGponOntUpAlarmOltSideDGuiMask | read-write | current | Receive Dying-Gasp of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.25 | ColumnzxGponOntUpAlarmOltSideLOAMui | read-only | current | Loss of PLOAM for ONUi Detection condition : When 3 consecutive PLOAM messages of ONUi are missing after the OLT issues SendPLOAMU request for that ONU Action … |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.26 | ColumnzxGponOntUpAlarmOltSideLOAMuiMask | read-write | current | Loss of PLOAM for ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.27 | ColumnzxGponOntUpAlarmOltSideMEMui | read-only | current | Message_Error Message from ONUi Detection condition : When the OLT receives an unknown message from ONUi Action : Cancel condition : When the operator is infor… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.28 | ColumnzxGponOntUpAlarmOltSideMEMuiMask | read-write | current | Message_Error Message from ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.29 | ColumnzxGponOntUpAlarmOltSideMISui | read-only | current | Link Mismatch of ONUi Detection condition : The OLT detects that the received PSTi and the transmitted PST are different. Action : Cancel condition : The OLT d… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.30 | ColumnzxGponOntUpAlarmOltSideMISuiMask | read-write | current | Link Mismatch of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.31 | ColumnzxGponOntUpAlarmOltSidePEEui | read-only | current | Physical Equipment Error of ONUi Detection condition : When the OLT receives a PEE Message from the ONU Action : Generate Loss_of_physical_layer_I notification… |
| 1.3.6.1.4.1.3902.1012.3.12.9.1.32 | ColumnzxGponOntUpAlarmOltSidePEEuiMask | read-write | current | Physical Equipment Error of ONUi mask |
| 1.3.6.1.4.1.3902.1012.3.12.10 | TablezxGponBerDowThresholdTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.10.1 | RowzxGponBerDowThresholdEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.10.1.1 | ColumnzxGponBerDowThresholdSDui | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.10.1.2 | ColumnzxGponBerDowThresholdSFui | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.10.1.3 | ColumnzxGponBerDowThresholdDOWi | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11 | TablezxGponOntUpPmOltSideTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1 | RowzxGponOntUpPmOltSideEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.1 | ColumnzxGponOntUpPmOltSideERRui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.2 | ColumnzxGponOntUpPmOltSideREIui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.3 | ColumnzxGponOntUpPmOltSideCorrNIdleGemFramesui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.4 | ColumnzxGponOntUpPmOltSideCorrIdleGemFramesui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.5 | ColumnzxGponOntUpPmOltSideErroredGemFramesui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.6 | ColumnzxGponOntUpPmOltSideGemPayloadBytesui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.7 | ColumnzxGponOntUpPmOltSideCorrectEthFramesui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.8 | ColumnzxGponOntUpPmOltSideErroredEthFramesui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.11.1.9 | ColumnzxGponOntUpPmOltSideTotalOmciFramesui | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12 | TablezxGponOltUpPmTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1 | RowzxGponOltUpPmEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.1 | ColumnzxGponOltUpPmERRu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.2 | ColumnzxGponOltUpPmREIu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.3 | ColumnzxGponOltUpPmCorrNIdleGemFramesu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.4 | ColumnzxGponOltUpPmCorrIdleGemFramesu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.5 | ColumnzxGponOltUpPmErroredGemFramesu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.6 | ColumnzxGponOltUpPmGemPayloadBytesu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.7 | ColumnzxGponOltUpPmCorrectEthFramesu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.8 | ColumnzxGponOltUpPmErroredEthFramesu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.12.1.9 | ColumnzxGponOltUpPmTotalOmciFramesu | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13 | TablezxGponOltPmStatisRealtimeInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1 | RowzxGponOltPmStatisRealtimeInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.1 | ColumnzxGponOltPmStatisInfoCorrectNonIdleGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.2 | ColumnzxGponOltPmStatisInfoCorrectIdleGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.3 | ColumnzxGponOltPmStatisInfoErroredGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.4 | ColumnzxGponOltPmStatisInfoGemPayloadBytesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.5 | ColumnzxGponOltPmStatisInfoCorrectEthernetFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.6 | ColumnzxGponOltPmStatisInfoErroredEthernetFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.7 | ColumnzxGponOltPmStatisInfoTotalOmciFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.8 | ColumnzxGponOltPmStatisInfoERR | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.9 | ColumnzxGponOltPmStatisInfoREI | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.10 | ColumnzxGponOltPmStatisInfoValidEthernetPacketDownstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.11 | ColumnzxGponOltPmStatisInfoCpuPacketDownstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.12 | ColumnzxGponOltPmStatisInfoPloamDownstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.13 | ColumnzxGponOltPmStatisInfoPloamUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.13.1.14 | ColumnzxGponOltPmStatisInfoInvalidPacketUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14 | TablezxGponOltPmStatisHistoryInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1 | RowzxGponOltPmStatisHistoryInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.1 | ColumnzxGponOltPmStatisHistoryInfoCorrectNonIdleGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.2 | ColumnzxGponOltPmStatisHistoryInfoCorrectIdleGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.3 | ColumnzxGponOltPmStatisHistoryInfoErroredGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.4 | ColumnzxGponOltPmStatisHistoryInfoGemPayloadBytesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.5 | ColumnzxGponOltPmStatisHistoryInfoCorrectEthernetFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.6 | ColumnzxGponOltPmStatisHistoryInfoErroredEthernetFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.7 | ColumnzxGponOltPmStatisHistoryInfoTotalOmciFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.8 | ColumnzxGponOltPmStatisHistoryInfoERR | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.9 | ColumnzxGponOltPmStatisHistoryInfoREI | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.10 | ColumnzxGponOltPmStatisHistoryInfoValidEthernetPacketDownstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.11 | ColumnzxGponOltPmStatisHistoryInfoCpuPacketDownstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.12 | ColumnzxGponOltPmStatisHistoryInfoPloamDownstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.13 | ColumnzxGponOltPmStatisHistoryInfoPloamUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.12.14.1.14 | ColumnzxGponOltPmStatisHistoryInfoInvalidPacketUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13 | NodezxGponPrivateOlt | |||
| 1.3.6.1.4.1.3902.1012.3.13.1 | TablezxGponOltPonInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1 | RowzxGponOltPonInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.1 | ColumnzxGponOltPonName | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.2 | ColumnzxGponOltPonDescription | read-write | current | The definition size of description does not include the termination. |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.3 | ColumnzxGPonOltPonOntDefaultState | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.4 | ColumnzxGPonOltPonOntDefaultPwMode | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.5 | ColumnzxGPonOltPonOntDefaultPw | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.6 | ColumnzxGPonOltPonOntAuthMode | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.7 | ColumnzxGPonOltPonOntSnAuthMode | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.8 | ColumnzxGPonOltPonOntSnMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.9 | ColumnzxGponOltPonOmccPortBase | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.10 | ColumnzxGPonOltPonAdminState | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.11 | ColumnzxGPonOltPonOperState | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.12 | ColumnzxGponOltPonSupportMaxOnts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.13 | ColumnzxGponOltPonRealLegalOnts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.14 | ColumnzxGponOltPonRealIllegalOnts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.15 | ColumnzxGponOltPonSupportMaxTConts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.16 | ColumnzxGponOltPonRealUsedTConts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.1.1.17 | ColumnzxGponOltPonOntConfigureStatus | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.2 | TablezxGponOltMgmtOperTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.2.1 | RowzxGponOltMgmtOperEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.2.1.1 | ColumnzxGponOltReset | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.2.1.2 | ColumnzxGponOltOff | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.2.1.3 | ColumnzxGponOltOpticalDetectOnce | read-write | current | excute olt Optical-Always-ON detect once. |
| 1.3.6.1.4.1.3902.1012.3.13.3 | TablezxGponUnCfgSnOntInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.3.1 | RowzxGponUnCfgSnOntInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.3.1.1 | ColumnzxGponUnCfgSnIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.3.1.2 | ColumnzxGponUnCfgSnOntSN | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.3.1.3 | ColumnzxGponUnCfgSnOntRID | read-only | current | The register ID of the unconfigured ONT. |
| 1.3.6.1.4.1.3902.1012.3.13.3.1.4 | ColumnzxGponUnCfgSnOntRtd | read-only | current | The RTD after ranging. |
| 1.3.6.1.4.1.3902.1012.3.13.3.1.5 | ColumnzxGponUnCfgSnOntPsw | read-only | current | The password reported by the ONT. |
| 1.3.6.1.4.1.3902.1012.3.13.3.1.6 | ColumnzxGponUnCfgSnOntState | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.3.1.7 | ColumnzxGponUnCfgSnOntTime | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.4 | TablezxGponOmccInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.4.1 | RowzxGponOmccInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.4.1.1 | ColumnzxGponOmccChannelNum | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.4.1.2 | ColumnzxGponOmccChannelBandwidth | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.4.1.3 | ColumnzxGponOmccChannelAdminState | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.4.1.4 | ColumnzxGponOmccChannelOpState | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.5 | TablezxGponOltBitErrTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.5.1 | RowzxGponOltBitErrEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.5.1.1 | ColumnzxGponOltUpBerEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.5.1.2 | ColumnzxGponOltUpBerCalcInterval | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.5.1.3 | ColumnzxGponOltDownBerEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.5.1.4 | ColumnzxGponOltDownBerCalcInterval | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.5.1.5 | ColumnzxGponOltUpSfThreshold | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.5.1.6 | ColumnzxGponOltUpSdThreshold | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.10 | TablezxGponStaticMultiPortIdInfoTable | not-accessible | current | The multicast address table, about the portid information. |
| 1.3.6.1.4.1.3902.1012.3.13.10.1 | RowzxGponStaticMultiPortIdInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.10.1.1 | ColumnzxGponStaticMultiPortIdInfoIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.10.1.2 | ColumnzxGponStaticMultiPortIdList | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.10.1.3 | ColumnzxGponStaticMultiAddrIdx | read-write | current | It is some 'zxGponStaticMulticastIdx' |
| 1.3.6.1.4.1.3902.1012.3.13.10.1.4 | ColumnzxGponStaticMultiPortIdStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.13.11 | TablezxGponStaticMulticastAddressTable | not-accessible | current | The multicast address table. |
| 1.3.6.1.4.1.3902.1012.3.13.11.1 | RowzxGponStaticMulticastAddressEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.11.1.1 | ColumnzxGponStaticMulticastIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.11.1.2 | ColumnzxGponStaticMulticastAddress | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.13.11.1.3 | ColumnzxGponStaticMulticastVlanId | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.13.11.1.4 | ColumnzxGponStaticMulticastPortIdIdx | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.11.1.5 | ColumnzxGponStaticMulticastStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.12 | TablezxGponMulticastAddressTable | not-accessible | current | The multicast address table. |
| 1.3.6.1.4.1.3902.1012.3.13.12.1 | RowzxGponMulticastAddressEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.12.1.1 | ColumnzxGponMulticastAddress | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.12.1.2 | ColumnzxGponMulticastVlanId | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.12.1.3 | ColumnzxGponMulticastIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.12.1.4 | ColumnzxGponMulticastPortIdIdx | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.12.1.5 | ColumnzxGponMulticastStatus | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.13 | TablezxGponDsBFPortIdInfoTable | not-accessible | current | The down broadcast flood control table ,about these portID. |
| 1.3.6.1.4.1.3902.1012.3.13.13.1 | RowzxGponDsBFPortIdInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.13.1.1 | ColumnzxGponDsBFPortIdInfoIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.13.1.2 | ColumnzxGponDsBFPortIdInfoList | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.13.1.3 | ColumnzxGponDsBFPortIdInfoVlanIdx | read-write | current | It is some 'zxGponDownBroadcastFloodVlanId' |
| 1.3.6.1.4.1.3902.1012.3.13.13.1.4 | ColumnzxGponDsBFPortIdInfoStatus | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.14 | TablezxGponDownBroadcastFloodTable | not-accessible | current | The down broadcast flood control table. |
| 1.3.6.1.4.1.3902.1012.3.13.14.1 | RowzxGponDownBroadcastFloodEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.14.1.1 | ColumnzxGponDownBroadcastFloodVlanId | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.14.1.2 | ColumnzxGponDownBroadcastFloodPortList | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.13.14.1.3 | ColumnzxGponDownBroadcastFloodEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.13.15 | TablezxGpon8021xOnOffTable | not-accessible | current | The portId 802.1x on-off table. |
| 1.3.6.1.4.1.3902.1012.3.13.15.1 | RowzxGpon8021xOnOffEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.15.1.1 | ColumnzxGpon8021xOnOffIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.15.1.2 | ColumnzxGpon8021xOnOffPortId | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.15.1.3 | ColumnzxGpon8021xOnOffEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.16 | TablezxGponOltLoopbackTestInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.16.1 | RowzxGponOltLoopbackTestInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.16.1.1 | ColumnzxGponOltLoopbackTestStart | read-write | current | 1:start loopback test 2:stop loopback test |
| 1.3.6.1.4.1.3902.1012.3.13.17 | TablezxGponOltEthSwitchTable | not-accessible | current | ETH SWITCH PROTECT STATE table. |
| 1.3.6.1.4.1.3902.1012.3.13.17.1 | RowzxGponOltEthSwitchEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.17.1.1 | ColumnzxGponEthSwitchProtectState | read-write | current | 0:DISABLE 1:ENABLE |
| 1.3.6.1.4.1.3902.1012.3.13.18 | TablezxGponOltScbPortTable | not-accessible | current | Configure SCB PORTID table. |
| 1.3.6.1.4.1.3902.1012.3.13.18.1 | RowzxGponOltScbPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.18.1.1 | ColumnzxGponOltScbPort | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.13.19 | TablezxGponEthTypeVlanMapTable | not-accessible | current | Ethernet Type Map to Vlan. |
| 1.3.6.1.4.1.3902.1012.3.13.19.1 | RowzxGponEthTypeVlanMapEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.19.1.1 | ColumnzxGponEthTypeVlanMapEthType | not-accessible | current | Ethernet protocol type |
| 1.3.6.1.4.1.3902.1012.3.13.19.1.2 | ColumnzxGponEthTypeVlanMapVlanId | read-write | current | The VLAN, which ethernet type map to. |
| 1.3.6.1.4.1.3902.1012.3.13.19.1.50 | ColumnzxGponEthTypeVlanMapEntryStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.1012.3.13.20 | TablezxGponOltEthVlanSwitchTable | not-accessible | current | ETH VLAN SWITCH PROTECT STATE table. |
| 1.3.6.1.4.1.3902.1012.3.13.20.1 | RowzxGponOltEthVlanSwitchEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.13.20.1.1 | ColumnzxGponEthSwitchVlanId | not-accessible | current | The VLAN, which port attached to bridge. |
| 1.3.6.1.4.1.3902.1012.3.13.20.1.2 | ColumnzxGponEthVlanSwitchRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.1012.3.21 | NodezxGponOntEquipMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.21.1 | TablezxGponOntStatusInfoTable | not-accessible | current | An instance of this managed entity is automatically created by the ONT after initialization. After the creation of this managed entity, the associated attribut… |
| 1.3.6.1.4.1.3902.1012.3.21.1.1 | RowzxGponOntStatusInfoEntry | not-accessible | current | An entry in the ONT equipment status information table, This managed entity represents the ONT as equipment. |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.1 | ColumnzxGponOntIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the ONT equipment, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.2 | ColumnzxGponOntMeId | read-only | current | A unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.3 | ColumnzxGponOntVendorId | read-only | current | It identifies the vendor of the ONT. |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.4 | ColumnzxGponOntVersionId | read-only | current | It identifies the version of the ONT as defined by the vendor. The printable value of '0' is used when version information is not available or applicable to th… |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.5 | ColumnzxGponOntSnId | read-only | current | The serial number is unique for each ONT. Note that the serial number of the ONT contains the vendor id and/or the version number. |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.6 | ColumnzxGponOntTrafficMgmtOpt | read-only | current | It identifies the upstream traffic management function implemented in the ONT. 1 means the traffic scheduler and priority queue mechanism are used for the upst… |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.7 | ColumnzxGponOntVpVcConnFunOpt | read-only | current | It identifies the support of ATM VP or VC cross-connection management functions for the interworking connections to non ATM UNIs. 0 means no cross-connection m… |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.8 | ColumnzxGponOntBatteryBackup | read-write | current | It provides a Boolean indication of whether or not the ONT/NT supports battery backup. False(2) will indicate that no battery is provisioned; true(1) indicates… |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.9 | ColumnzxGponOntAdminStatus | read-write | current | It is used to activate (true 1) and deactivate (false 2) the functions performed by instances of this managed entity.It is read from ONT. |
| 1.3.6.1.4.1.3902.1012.3.21.1.1.10 | ColumnzxGponOntOperStatus | read-only | current | It indicates whether or not a managed entity is capable of performing its task. Valid values are true(1,enabled) and false(2,disabled). |
| 1.3.6.1.4.1.3902.1012.3.21.2 | TablezxGponOntAlarmTable | not-accessible | current | This alarm is used to notify the managed system when a failure has been detected or cleared. |
| 1.3.6.1.4.1.3902.1012.3.21.2.1 | RowzxGponOntAlarmEntry | not-accessible | current | An entry in the ONT equipment alarm information table. |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.1 | ColumnzxGponOntEquipmentAlarm | read-only | current | It is used to Indicate a functional failure on an internal interface. When this is true(1) the failure exists; When false(2), the failure is not exist. |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.2 | ColumnzxGponOntEquipmentAlarmMask | read-write | current | Indicates whether the occurence of zxGponOntEquipmentAlarm alarm should result in NE generated by the agent layer. When this is false(2) it should be generated… |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.3 | ColumnzxGponOntPoweringAlarm | read-only | current | It is used to Indicate Loss of external power. When this is true(1) the failure exists; When false(2), the failure is not exist. |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.4 | ColumnzxGponOntPoweringAlarmMask | read-write | current | Indicates whether the occurence of zxGponOntPoweringAlarm alarm should result in NE generated by the agent layer. When this is false(2) it should be generated;… |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.5 | ColumnzxGponOntBatteryMissing | read-only | current | It is used to Indicate Battery is provisioned but missing. When this is true(1) the failure exists; When false(2), the failure is not exist. |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.6 | ColumnzxGponOntBatteryMissingMask | read-write | current | Indicates whether the occurence of zxGponOntBatteryMissing alarm should result in NE generated by the agent layer. When this is false(2) it should be generated… |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.7 | ColumnzxGponOntBatteryFailure | read-only | current | It is used to Indicate Battery is provisioned and present but cannot recharge. When this is true(1) the failure exists; When false(2), the failure is not exist. |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.8 | ColumnzxGponOntBatteryFailureMask | read-write | current | Indicates whether the occurence of zxGponOntBatteryFailure alarm should result in NE generated by the agent layer. When this is false(2) it should be generated… |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.9 | ColumnzxGponOntBatteryLow | read-only | current | It is used to Indicate battery is provisioned and present but its voltage is too low. When this is true(1) the failure exists; When false(2), the failure is no… |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.10 | ColumnzxGponOntBatteryLowMask | read-write | current | Indicates whether the occurence of zxGponOntBatteryLow alarm should result in NE generated by the agent layer. When this is false(2) it should be generated; Wh… |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.11 | ColumnzxGponOntPhysicalIntrusionAlarm | read-only | current | It is used to Indicate Applies if the ONT is supported with detection such as door or box open. When this is true(1) the failure exists; When false(2), the fai… |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.12 | ColumnzxGponOntPhysicalIntrusionAlarmMask | read-write | current | Indicates whether the occurence of zxGponOntPhysicalIntrusionAlarm alarm should result in NE generated by the agent layer. When this is false(2) it should be g… |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.13 | ColumnzxGponOntONTSelfTestFailure | read-only | current | It is used to Indicate ONT has failed autonomous self test. When this is true(1) the failure exists; When false(2), the failure is not exist. |
| 1.3.6.1.4.1.3902.1012.3.21.2.1.14 | ColumnzxGponOntONTSelfTestFailureMask | read-write | current | Indicates whether the occurence of zxGponOntONTSelfTestFailure alarm should result in NE generated by the agent layer. When this is false(2) it should be gener… |
| 1.3.6.1.4.1.3902.1012.3.21.3 | TablezxGponOntActionsTable | not-accessible | current | Acts the ONT table. |
| 1.3.6.1.4.1.3902.1012.3.21.3.1 | RowzxGponOntActionsEntry | not-accessible | current | An entry in the ONT equipment Actions table. |
| 1.3.6.1.4.1.3902.1012.3.21.3.1.1 | ColumnzxGponOntReboot | read-write | current | It is used to Reboot the ONT. |
| 1.3.6.1.4.1.3902.1012.3.21.3.1.2 | ColumnzxGponOntTest | read-write | current | It is used to initiate an ONT self test. Test outcome is 'Pass' or 'Fail'. |
| 1.3.6.1.4.1.3902.1012.3.21.3.1.3 | ColumnzxGponOntSyncTime | read-write | current | It is used to synchronize the start time of all Monitoring managed entities of the ONT with the reference time of the OLT and to reset the registers of the Mon… |
| 1.3.6.1.4.1.3902.1012.3.21.3.1.4 | ColumnzxGponOntMibReset | read-write | current | Reset the MIB data sync attributes to 0x00 and reset the MIB of the ONT to its default state. This default MIB consists of one instance of the ONT(ONTB)-PON ma… |
| 1.3.6.1.4.1.3902.1012.3.21.3.1.5 | ColumnzxGponOntTestResult | read-only | current | Test outcome is 'Pass' or 'Fail'. |
| 1.3.6.1.4.1.3902.1012.3.21.4 | TablezxGponOnt2StatusInfoTable | not-accessible | current | An instance of this managed entity is automatically created by the ONT after initialization. After the creation of this managed entity, the associated attribut… |
| 1.3.6.1.4.1.3902.1012.3.21.4.1 | RowzxGponOnt2StatusInfoEntry | not-accessible | current | An entry in the ONT2 equipment config information table, This managed entity represents the ONT additional attributes. |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.1 | ColumnzxGponOnt2Index | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the ONT equipment, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.2 | ColumnzxGponOnt2MeId | read-only | current | It provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.3 | ColumnzxGponOnt2EquipmentId | read-only | current | It may be used to identify the specific type of ONT. |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.4 | ColumnzxGponOnt2OMCCVersion | read-only | current | It is used to identify the specific version of the OMCC protocol being used by the ONT. This is used to allow the OLT to manage a network with ONTs that suppor… |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.5 | ColumnzxGponOnt2VendorProdCode | read-only | current | It is used to provide a vendor-specific product code for the ONT. |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.6 | ColumnzxGponOnt2SecurityCapab | read-only | current | It is used to advertise the advanced security modes of the ONT. The following codepoints are defined: 0: Reserved for future use; 1: AES encryption of the down… |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.7 | ColumnzxGponOnt2SecurityMode | read-write | current | It is used to select the advanced security mode for the ONT. The following codepoints are defined: 0: Reserved for future use; 1: AES algorithm for unicast tra… |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.8 | ColumnzxGponOnt2TotalPriQueNum | read-only | current | It provides a total number of priority queues which are not associated with the PON IF line card. |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.9 | ColumnzxGponOnt2TotalTrafSchedNum | read-only | current | It provides a total number of Traffic Schedulers which are not associated with the PON IF line card. The ONT supports NULL function, HOL scheduling and WRR fro… |
| 1.3.6.1.4.1.3902.1012.3.21.4.1.10 | ColumnzxGponOnt2Mode | read-only | current | It identifies whether the ONT can operate in ATM-only mode (1), GEM-only mode (2), or dual (both ATM and GEM) mode (3). |
| 1.3.6.1.4.1.3902.1012.3.21.11 | TablezxGponThresholdDataTable | not-accessible | current | Contains threshold values for the performance monitoring parameters maintained in one or more instances of other managed entities. |
| 1.3.6.1.4.1.3902.1012.3.21.11.1 | RowzxGponThresholdDataEntry | not-accessible | current | An entry in the Threshold Data 1 table. |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.1 | ColumnzxGponThresholdDataIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the table, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.2 | ColumnzxGponThresholdDataMeId | read-only | current | A unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.3 | ColumnzxGponThresholdDataValue1 | read-create | current | It provides the associated threshold value for the 1st thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.4 | ColumnzxGponThresholdDataValue2 | read-create | current | It provides the associated threshold value for the 2nd thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.5 | ColumnzxGponThresholdDataValue3 | read-create | current | It provides the associated threshold value for the 3rd/9th thresholded counter in the History Data type managed entity. It may be created/read/written/modified… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.6 | ColumnzxGponThresholdDataValue4 | read-create | current | It provides the associated threshold value for the 4th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.7 | ColumnzxGponThresholdDataValue5 | read-create | current | It provides the associated threshold value for the 5th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.8 | ColumnzxGponThresholdDataValue6 | read-create | current | It provides the associated threshold value for the 6th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.9 | ColumnzxGponThresholdDataValue7 | read-create | current | It provides the associated threshold value for the 7st thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.10 | ColumnzxGponThresholdDataValue8 | read-create | current | It provides the associated threshold value for the 8th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.11 | ColumnzxGponThresholdDataValue9 | read-create | current | It provides the associated threshold value for the 9th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.12 | ColumnzxGponThresholdDataValue10 | read-create | current | It provides the associated threshold value for the 10th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.13 | ColumnzxGponThresholdDataValue11 | read-create | current | It provides the associated threshold value for the 11th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.14 | ColumnzxGponThresholdDataValue12 | read-create | current | It provides the associated threshold value for the 12th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.15 | ColumnzxGponThresholdDataValue13 | read-create | current | It provides the associated threshold value for the 13th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.16 | ColumnzxGponThresholdDataValue14 | read-create | current | It provides the associated threshold value for the 14th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.17 | ColumnzxGponThresholdDataCreateUsedIdx | read-create | current | This attribute represents the template index which created by zxGponE2eServicePathTable. If this object is not created by zxGponE2eServicePathTable, this attri… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.18 | ColumnzxGponThresholdDataModifyMatchIdx | read-only | current | This attribute represents the template index of a matching template when this table is modified directly. If there is no mactching template after modified, thi… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.19 | ColumnzxGponThresholdDataModifyFlag | read-only | current | If this object is created by zxGponE2eServicePathTable, this attribute represents the modifing flag of template used by this object, it is set to true(1) if th… |
| 1.3.6.1.4.1.3902.1012.3.21.11.1.20 | ColumnzxGponThresholdDataEntryStatus | read-create | current | The control that allows creation and deletion of entries. |
| 1.3.6.1.4.1.3902.1012.3.21.13 | TablezxGponProtectionDataTable | not-accessible | current | It is used for the ONT that supports the PON protection function. It represents the capability and parameters for protection function. |
| 1.3.6.1.4.1.3902.1012.3.21.13.1 | RowzxGponProtectionDataEntry | not-accessible | current | An entry in the Protection Data table. |
| 1.3.6.1.4.1.3902.1012.3.21.13.1.1 | ColumnzxGponProtectionDataIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the ONT equipment, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.21.13.1.2 | ColumnzxGponProtectionDataMeId | read-only | current | A unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.21.13.1.3 | ColumnzxGponProtectionDataWorkingAni | read-only | current | It indicates the index of the ANI-G managed table that represents a working side of PON protection. I.e. it is the table XXXXX index. |
| 1.3.6.1.4.1.3902.1012.3.21.13.1.4 | ColumnzxGponProtectionDataProtectionAni | read-only | current | It indicates the index of the ANI-G managed table that represents a protection side of PON protection. I.e. it is the table XXXXX index. |
| 1.3.6.1.4.1.3902.1012.3.21.13.1.5 | ColumnzxGponProtectionDataProtectionType | read-only | current | It provides the behaviour of PON protection. The valid values are as follows: 1: 1+1 Protection, 2: 1:1 Protection without Extra traffic, 3: 1:1 Protection wit… |
| 1.3.6.1.4.1.3902.1012.3.21.13.1.6 | ColumnzxGponProtectionDataRevertive | read-only | current | It indicates whether the protection scheme uses revertive mode (true, value 1) or non-revertive mode (false, value 2). |
| 1.3.6.1.4.1.3902.1012.3.21.13.1.7 | ColumnzxGponProtectionDataWTT | read-write | current | It specifies the amount of time, in units of seconds, to wait during the time from a fault clear to switching over the trail/connection/line to the working sid… |
| 1.3.6.1.4.1.3902.1012.3.21.13.1.8 | ColumnzxGponProtectionDataSGT | read-write | current | It specifies the amount of time, in units of milliseconds, to wait during the interval from the detection of a fault to the time when a protection trail/connec… |
| 1.3.6.1.4.1.3902.1012.3.22 | NodezxGponAniMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.22.1 | TablezxGponAniInfoTable | not-accessible | current | An instance of this managed entity is automatically created by the ONT after initialization. |
| 1.3.6.1.4.1.3902.1012.3.22.1.1 | RowzxGponAniInfoEntry | not-accessible | current | An entry in the ANI status information table, This managed entity is used to organize data associated with the Access Network Interface supported by the ONT. |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.1 | ColumnzxGponAniInfoIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the Ani manangement, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.2 | ColumnzxGponAniInfoMeId | read-only | current | A unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.3 | ColumnzxGponAniInfoSRIndication | read-only | current | This Boolean attribute indicates the capability of status reporting. The value TRUE means that the status reporting is available for all T-CONTs which are asso… |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.4 | ColumnzxGponAniInfoTotalTcontNumber | read-only | current | This attribute provides the total number of T-CONTs that are able to be supported in this ANI port. |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.5 | ColumnzxGponAniInfoGemBlockLength | read-write | current | This attribute indicates the reporting block size for GEM mode in units of bytes. |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.6 | ColumnzxGponAniInfoPiggybackDbaReporting | read-only | current | This attribute provides a special code that indicates the piggyback DBA reporting format capabilities of this ONT. ITU-T Rec. |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.7 | ColumnzxGponAniInfoWholeOnuDbaReporting | read-only | current | This attribute indicates whether or not whole ONU DBA reporting as specified in ITU-T Rec. G.984.3 is supported by the ONU/ONT. |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.8 | ColumnzxGponAniInfoSFThreshold | read-write | current | This attribute represents the upstream/downstream BER threshold to detect SFi/SF alarm. When this value is y in decimal, the BER threshold for SFi/SF is 10^(-y… |
| 1.3.6.1.4.1.3902.1012.3.22.1.1.9 | ColumnzxGponAniInfoSDThreshold | read-write | current | This attribute represents the upstream/downstream BER threshold to detect SDi/SD alarm. When this value is x in decimal, the BER threshold for SFi/SF is 10^(-x… |
| 1.3.6.1.4.1.3902.1012.3.22.3 | TablezxGponTcontInfoTable | not-accessible | current | An instance of this managed entity represents a logical connection group that is associated with the Alloc-id. A T-CONT can accommodate ATM cells or GEM packet… |
| 1.3.6.1.4.1.3902.1012.3.22.3.1 | RowzxGponTcontInfoEntry | not-accessible | current | An entry in the T-CONT status information table. |
| 1.3.6.1.4.1.3902.1012.3.22.3.1.1 | ColumnzxGponTcontInfoIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the ANI management, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.22.3.1.2 | ColumnzxGponTcontInfoMeId | read-only | current | A unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.22.3.1.3 | ColumnzxGponTcontInfoAllocID | read-write | current | Alloc ID. |
| 1.3.6.1.4.1.3902.1012.3.22.3.1.4 | ColumnzxGponTcontInfoModeIndicator | read-only | current | Mode indicator. |
| 1.3.6.1.4.1.3902.1012.3.22.3.1.5 | ColumnzxGponTcontInfoPolicy | read-only | current | Strategy. |
| 1.3.6.1.4.1.3902.1012.3.23 | NodezxGponUniMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.23.1 | TablezxGpon8021pMapperTable | not-accessible | current | One or more instances is used to associate the priorities of 802.1P priority tagged frames with a specific connection. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1 | RowzxGpon8021pMapperEntry | not-accessible | current | One or more instances of the 802.1p Mapper entity. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.1 | ColumnzxGpon8021pMapperMeIdIdx | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.2 | ColumnzxGpon8021pMapperPptpUniPtr | read-write | current | An instance identifier of the PPTP UNI that is associated with this 802.1p Priority Queue Mapper, in the case of direct 802.1p mapping. In the case of combined… |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.3 | ColumnzxGpon8021pMapperPri0IwTpPtr | read-write | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 000 tagged frames. The value 0xFFFF is a null pointer. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.4 | ColumnzxGpon8021pMapperPri1IwTpPtr | read-write | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 001 tagged frames. The value 0xFFFF is a null pointer. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.5 | ColumnzxGpon8021pMapperPri2IwTpPtr | read-write | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 010 tagged frames. The value 0xFFFF is a null pointer. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.6 | ColumnzxGpon8021pMapperPri3IwTpPtr | read-write | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 011 tagged frames. The value 0xFFFF is a null pointer. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.7 | ColumnzxGpon8021pMapperPri4IwTpPtr | read-write | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 100 tagged frames. The value 0xFFFF is a null pointer. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.8 | ColumnzxGpon8021pMapperPri5IwTpPtr | read-write | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 101 tagged frames. The value 0xFFFF is a null pointer. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.9 | ColumnzxGpon8021pMapperPri6IwTpPtr | read-write | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 110 tagged frames. The value 0xFFFF is a null pointer. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.10 | ColumnzxGpon8021pMapperPri7IwTpPtr | read-write | current | This attribute represents a pointer to the Interworking Termination Point that is associated with P-Bit = 111 tagged frames. The value 0xFFFF is a null pointer. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.11 | ColumnzxGpon8021pMapperUntagFrmInd | read-write | current | This attribute indicates how the ONT should handle Untagged Ethernet frames received across the associated Ethernet interface. Valid values include the followi… |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.12 | ColumnzxGpon8021pMapperDscpTo8021pPri | read-write | current | This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 1('zxGpon8021pMapperUntagFrmInd' is dscpTo8021p), t… |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.13 | ColumnzxGpon8021pMapperDefaultPri | read-write | current | This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 2('zxGpon8021pMapperUntagFrmInd' is tagFrmToVal), t… |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.14 | ColumnzxGpon8021pMapperMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.23.1.1.15 | ColumnzxGpon8021pMapperEntryStatus | read-create | current | This attribute can be create and delete. |
| 1.3.6.1.4.1.3902.1012.3.23.2 | TablezxGponUniInfoTable | not-accessible | current | One or more instances of the UNI-G managed entity may be contained in an instance of a Subscriber Line Card managed entity. |
| 1.3.6.1.4.1.3902.1012.3.23.2.1 | RowzxGponUniInfoEntry | not-accessible | current | One or more instances of the UNI-G managed entity may be contained in an instance of a Subscriber Line Card managed entity. |
| 1.3.6.1.4.1.3902.1012.3.23.2.1.1 | ColumnzxGponUniInfoIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the UNI management, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.23.2.1.2 | ColumnzxGponUniInfoMeId | read-only | current | This attribute provides a unique number for each instance of this managed entity. This number is directly associated with the physical position of the UNI. |
| 1.3.6.1.4.1.3902.1012.3.23.2.1.3 | ColumnzxGponUniInfoCfgOption | read-write | current | This attribute holds the UNI Configuration Code field. |
| 1.3.6.1.4.1.3902.1012.3.23.2.1.4 | ColumnzxGponUniInfoAdminState | read-write | current | When the Administrative State attribute is set to disabled(2), all user traffic to and from this UNI is blocked and alarms for this UNI and all associated mana… |
| 1.3.6.1.4.1.3902.1012.3.23.8 | NodeethernetUniMib | |||
| 1.3.6.1.4.1.3902.1012.3.23.8.1 | TablezxGponPPTPEthUniInfoTable | not-accessible | current | This managed entity represents the points at an Ethernet UNI in the ONT where physical paths terminate and physical path level functions (e.g. Ethernet functio… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1 | RowzxGponPPTPEthUniInfoEntry | not-accessible | current | One or more instances of this managed entity shall be contained in an instance of a Subscriber Line Card managed entity classified as a native LAN type (e.g. E… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.1 | ColumnzxGponPPTPEthInfoTPID | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the PPTP Ethernet information Table. |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.2 | ColumnzxGponPPTPEthInfoMeId | read-only | current | This attribute provides a unique number for each instance of this managed entity. This 2-byte number is directly associated with the physical position of the U… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.3 | ColumnzxGponPPTPEthInfoExpectedType | read-write | current | Coding Contents Description 0 no LIM Default value 1 A1.5 ATM 1.544 Mbit/s module 2 A2 ATM 2.048 Mbit/s 3 A6.3 ATM 6.312 Mbit/s module 4 A6.3U ATM 6.312 Mbit/s… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.4 | ColumnzxGponPPTPEthInfoSensedType | read-only | current | If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type' equals the value of 'Expected type'. If the value of 'Expected type' equa… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.5 | ColumnzxGponPPTPEthInfoAutoDetectCfg | read-write | current | For 10/100 Base-T Ethernet interfaces, this attribute is used to set the configuration options: Auto-sensing: 0x00; 10Base-T: 0x01; 100Base-T: 0x02: Gigabit Et… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.6 | ColumnzxGponPPTPEthInfoEthLoopback | read-write | current | This attribute is used to set the Ethernet loopback configuration: No loopback (value normal), Loop3 (value loop, Loopback of downstream traffic after PHY tran… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.7 | ColumnzxGponPPTPEthInfoAdminState | read-write | current | This attribute is used to activate (unlock: value enabled) and deactivate (lock: value disabled) the functions performed by instances of this managed entity. S… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.8 | ColumnzxGponPPTPEthInfoOperationalState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.9 | ColumnzxGponPPTPEthInfoDuplexSpeedInd | read-only | current | For 10/100 Base-T Ethernet interfaces, it is used to set the configuration options: Auto-sensing(incluing speed and duplex): 1; It comprises 'Auto detection co… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.10 | ColumnzxGponPPTPEthInfoMaxFrameSize | read-write | current | It denotes the maximum allowed frame size to be transmitted across this interface. It may be created/read/written/modified.Writing or modifing can be done when… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.11 | ColumnzxGponPPTPEthInfoDTEorDCEInd | read-write | current | It indicates whether the Ethernet interface wiring is DTE(2) or DCE(1). It may be created/read/written/modified.Writing or modifing can be done when the entry … |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.12 | ColumnzxGponPPTPEthInfoPauseTime | read-write | current | It allows the ONT line card to request that the customer terminal temporarily suspend sending data. Units are in 'pause_quanta' (1 pause_quantum equals 512 bit… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.13 | ColumnzxGponPPTPEthInfoBridgedorIPInd | read-write | current | It indicates whether the Ethernet interface is bridged or derived from an IP router function (Bridged: 1; IP router: 2; 3: depends on Subscriber Line Card.) 3 … |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.14 | ColumnzxGponPPTPEthInfoARC | read-write | current | It is used to control alarm reporting from this ONT(managed entity). off means alarm reporting allowed immediately and on means alarm reporting inhibited, unti… |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.15 | ColumnzxGponPPTPEthInfoARCInterval | read-write | current | It provides a provisionable length of time. Units are given in minutes. It may be created/read/written/modified.Writing or modifing can be done when the entry … |
| 1.3.6.1.4.1.3902.1012.3.23.8.1.1.16 | ColumnzxGponPPTPEthInfoPppoeFilterEnable | read-write | current | It may be used to control filtering of PPPoE packets on this Ethernet port. The disabled is used to disable filtering. The enabled is used to enable filtering.… |
| 1.3.6.1.4.1.3902.1012.3.23.8.2 | TablezxGponMACBSPInfoTable | not-accessible | current | This managed entity is used to organize data that affects all ports on a MAC Bridge at a bridged LAN Ethernet UNI interface on the ONT. Instances of this manag… |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1 | RowzxGponMACBSPInfoEntry | not-accessible | current | This managed entity is used to organize data that affects all ports on a MAC Bridge at a bridged LAN Ethernet UNI interface on the ONT. |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.1 | ColumnzxGponMACBSPInfoMeIdIdx | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. The first byte is the slot id (defined in 7.1.3). If the UNI is integrated, t… |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.2 | ColumnzxGponMACBSPInfoSTPInd | read-write | current | It indicates whether or not a spanning tree algorithm(protocol) is enabled. The value TRUE means enabled. It may be created/read/written/modified.Writing or mo… |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.3 | ColumnzxGponMACBSPInfoLearningInd | read-write | current | It indicates whether or not the learning functions of the bridge are enabled. The value TRUE means enabled. It may be created/read/written/modified.Writing or … |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.4 | ColumnzxGponMACBSPInfoPortBInd | read-write | current | It indicates whether or not bridging between FE ports is enabled. The value TRUE means enabled. It may be created/read/written/modified.Writing or modifing can… |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.5 | ColumnzxGponMACBSPInfoPriority | read-write | current | It indicates the bridge priority set on the LAN card(or MAC bridge). The value of this object is reflected to the BridgePriority attribute of the MAC Bridge Co… |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.6 | ColumnzxGponMACBSPInfoMaxAge | read-write | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. But G.98… |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.7 | ColumnzxGponMACBSPInfoHelloTime | read-write | current | It uses for HelloTime when this bridge is acting as the root or that a bridge advertises its presence while as a root or attempting to become a root, in units … |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.8 | ColumnzxGponMACBSPInfoForwardDelay | read-write | current | It uses for ForwardDelay when this bridge is acting as the root or that the bridge on the Ethernet card in the ONT retains a packet before forwarding it, in un… |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.9 | ColumnzxGponMACBSPInfoMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.23.8.2.1.10 | ColumnzxGponMACBSPInfoEntryStatus | read-create | current | This attribute can be create and delete. |
| 1.3.6.1.4.1.3902.1012.3.23.8.3 | TablezxGponMACBridgeCfgDataInfoTable | not-accessible | current | This managed entity is used to organize and record data that is associated with bridged LAN configurations. Some of the data is volatile. Instances of this man… |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1 | RowzxGponMACBridgeCfgDataInfoEntry | not-accessible | current | This managed entity is associated with one instance of a MACBridgeServiceProfile. |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1.1 | ColumnzxGponMACBCfgDataBridgeMACAddress | read-only | current | This attribute indicates the MAC address used by the bridge. Upon autonomous instantiation, this attribute consists of all 0x00. |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1.2 | ColumnzxGponMACBCfgDataBridgePriority | read-only | current | This attribute denotes the priority of the bridge and is positive integer-valued. Upon autonomous instantiation, the value 0x8000 is used. |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1.3 | ColumnzxGponMACBCfgDataDesignatedRoot | read-only | current | This attribute provides the bridge identifier for the root of the spanning tree. This attribute consists of Bridge Priority (2 bytes) and MAC address (6 bytes). |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1.4 | ColumnzxGponMACBCfgDataRootPathCost | read-only | current | This attribute provides the cost of the best path to the root as seen from the bridge. Upon autonomous instantiation, the value 0x00 is used. |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1.5 | ColumnzxGponMACBCfgDataBridgePortCount | read-only | current | This attribute provides the number of existing ports controlled by this bridge. |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1.6 | ColumnzxGponMACBCfgDataRootPortNum | read-only | current | This attribute provides the port number that has the lowest cost from the bridge to the root bridge. The value 0x00 means that the port itself is the root. Upo… |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1.7 | ColumnzxGponMACBCfgDataHelloTime | read-only | current | This attribute provides the time interval (in 256ths of a second) between hello packets. It is the 'HelloTime' received from the designated root. The range is … |
| 1.3.6.1.4.1.3902.1012.3.23.8.3.1.8 | ColumnzxGponMACBCfgDataForwardDelay | read-only | current | This attribute gives the time (in 256ths of a second) that the bridge on the Ethernet card in the ONT retains a packet before forwarding it. It is the 'Forward… |
| 1.3.6.1.4.1.3902.1012.3.23.8.4 | TablezxGponMACBriPortCfgDataInfoTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Instances of this managed entity a… |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1 | RowzxGponMACBriPortCfgDataInfoEntry | not-accessible | current | Zero or more instances of this managed entity shall be contained in an instance of the MACBridgeServiceProfile. |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.1 | ColumnzxGponMACBriPortCfgDataMeIdIdx | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.2 | ColumnzxGponMACBriPortCfgDataBridgeIdPtr | read-write | current | This attribute identifies the MAC bridge controlling the port. This attribute points to the instance of the MACBridgeServiceProfile. |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.3 | ColumnzxGponMACBriPortCfgDataPortNum | read-write | current | This attribute provides the port number. |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.4 | ColumnzxGponMACBriPortCfgDataTPType | read-write | current | This attribute identifies the type of the termination point associated with this MAC bridge port. The value is set to 0x01 if this bridge port is associated wi… |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.5 | ColumnzxGponMACBriPortCfgDataTPPointer | read-write | current | This attribute points to the termination point associated with this MAC bridge port. The value of this attribute is the same as the id of the Physical Path Ter… |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.6 | ColumnzxGponMACBriPortCfgDataPortPriority | read-write | current | This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255). |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.7 | ColumnzxGponMACBriPortCfgDataPortPathCost | read-write | current | This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65 535). |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.8 | ColumnzxGponMACBriPortCfgDataPortSpanTreeInd | read-write | current | This Boolean attribute indicates whether or not STP is enabled at this port. The value TRUE means enabled. |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.9 | ColumnzxGponMACBriPortCfgDataEncapMethod | read-write | current | This attribute identifies the frame encapsulation method that is used. Value 0x00: identification by ATM VC; value 0x01: LLC encapsulation. Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.10 | ColumnzxGponMACBriPortCfgDataLANFCSInd | read-write | current | This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x01) or discarded (value 0x02) towards the OLT. Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.11 | ColumnzxGponMACBriPortCfgDataMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.23.8.4.1.12 | ColumnzxGponMACBriPortCfgDataEntryStatus | read-create | current | This attribute can be create and delete. |
| 1.3.6.1.4.1.3902.1012.3.23.8.5 | TablezxGponMACBriPortFilterTableInfoTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Instances of this managed entity s… |
| 1.3.6.1.4.1.3902.1012.3.23.8.5.1 | RowzxGponMACBriPortFilterTableInfoEntry | not-accessible | current | Alternative schemes for this managed entity may be included in future Recommendations. |
| 1.3.6.1.4.1.3902.1012.3.23.8.5.1.1 | ColumnzxGponMACBriPortFilterTableMacAddr | not-accessible | current | This attribute lists destination MAC Addresses associated with the bridge port. |
| 1.3.6.1.4.1.3902.1012.3.23.8.5.1.2 | ColumnzxGponMACBriPortFilterTableAction | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.23.8.5.1.3 | ColumnzxGponMACBriPortFilterTableEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.23.8.6 | TablezxGponMACBriPortDesignationDataTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Instances of this managed entity s… |
| 1.3.6.1.4.1.3902.1012.3.23.8.6.1 | RowzxGponMACBriPortDesignationDataEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.23.8.6.1.1 | ColumnzxGponMACBriPortDesignationDataRootCostPort | read-only | current | This attribute provides the Designated Root, Designated Cost, Designated Bridge, and Designated Port outputs of the 'Read port parameters' operation defined in… |
| 1.3.6.1.4.1.3902.1012.3.23.8.6.1.2 | ColumnzxGponMACBriPortDesignationDataPortState | read-only | current | This attribute provides status information on the port. Valid values include 'disabled'(value 0x00), 'listening' (value 0x01), 'learning' (value 0x02), 'forwar… |
| 1.3.6.1.4.1.3902.1012.3.23.8.7 | TablezxGponMACBriPortAddrInfoTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Instances of this managed entity s… |
| 1.3.6.1.4.1.3902.1012.3.23.8.7.1 | RowzxGponMACBriPortAddrInfoEntry | not-accessible | current | Alternative schemes for this managed entity may be included in future Recommendations. |
| 1.3.6.1.4.1.3902.1012.3.23.8.7.1.1 | ColumnzxGponMACBriPortAddrMacAddr | not-accessible | current | This attribute lists destination MAC Addresses associated with the bridge port. |
| 1.3.6.1.4.1.3902.1012.3.23.8.7.1.2 | ColumnzxGponMACBriPortAddrAction | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.23.8.7.1.3 | ColumnzxGponMACBriPortAddrDynStatic | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.23.8.7.1.4 | ColumnzxGponMACBriPortAddrAgingTime | read-only | current | Age in seconds (1s to 4095s) |
| 1.3.6.1.4.1.3902.1012.3.23.8.8 | TablezxGponIpRouterSPInfoTable | not-accessible | current | This managed entity is used to organize data that affects all ports on an IP router on a routed LAN UNI interface on the ONT. Instances of this managed entity … |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1 | RowzxGponIpRouterSPInfoEntry | not-accessible | current | This managed entity is used to organize data that affects all ports on an IP router on a routed LAN UNI interface on the ONT. |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1.1 | ColumnzxGponIpRouterSPInfoMeIdIdx | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1.2 | ColumnzxGponIpRouterSPInfoForwardingInd | read-write | current | This boolean attribute indicates whether or not forwarding of IP packets as a whole is enabled. The value TRUE means enabled. The initial value is enabled. |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1.3 | ColumnzxGponIpRouterSPInfoProxyARPInd | read-write | current | This boolean attribute indicates whether or not proxy ARP is enabled. The value TRUE means enabled. The initial value is enabled. |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1.4 | ColumnzxGponIpRouterSPInfoDirectedBroadcastInd | read-write | current | This boolean attribute indicates whether or not relaying of directed broadcast packets is enabled. The value TRUE means enabled. The initial value is disabled. |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1.5 | ColumnzxGponIpRouterSPInfoUpstreamMulticastFiltering | read-write | current | This attribute indicates whether upstream IP multicast packets are forwarded (value 0x01) or filtered (value 0x01). The initial value is 0x02. |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1.6 | ColumnzxGponIpRouterSPInfoDownstreamMulticastFiltering | read-write | current | This attribute indicates whether upstream IP multicast packets are forwarded (value 0x01) or filtered (value 0x01). The initial value is 0x02. |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1.7 | ColumnzxGponIpRouterSPInfoMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.23.8.8.1.8 | ColumnzxGponIpRouterSPInfoEntryStatus | read-create | current | This attribute can be create and delete. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9 | TablezxGponIpPortCfgDataInfoTable | not-accessible | current | This managed entity is used to organize data that is associated with IP address and IP port provisioning. Instances of this managed entity are created and dele… |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1 | RowzxGponIpPortCfgDataInfoEntry | not-accessible | current | Zero or more instances of this managed entity shall be contained in an instance of the IP Port configuration data. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.1 | ColumnzxGponIpPortCfgDataMeIdIdx | not-accessible | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.2 | ColumnzxGponIpPortCfgDataPortNum | read-write | current | This attribute identifies the port at which IP provisioning takes place. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.3 | ColumnzxGponIpPortCfgDataTPType | read-write | current | This attribute identifies the type of the termination point associated with this IP port. The value is set to 0x01 if this IP port is associated with the LAN s… |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.4 | ColumnzxGponIpPortCfgDataTPPointer | read-write | current | This attribute points to the instance of the TP associated with this port. When this IP port is associated with the LAN side's TP, this attribute points to the… |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.5 | ColumnzxGponIpPortCfgDataPortAddress | read-write | current | This attribute identifies the provisioned IP address. When an IP address is not assigned, this attribute consists of all 0x00. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.6 | ColumnzxGponIpPortCfgDataPortMask | read-write | current | This attribute identifies the address mask associated with the provisioned IP address. When an IP address mask is not assigned, this attribute consists of all … |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.7 | ColumnzxGponIpPortCfgDataUnnumbered | read-write | current | This boolean attribute indicates whether or not this IP port has an IP address. The value TRUE means unnumbered. (For future use by IP router function.). |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.8 | ColumnzxGponIpPortCfgDataAdministrativeState | read-write | current | This boolean attribute is used to activate (unlock, value 0x01) and deactivate (lock, value 0x02) the functions performed by instances of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.9 | ColumnzxGponIpPortCfgDataPortState | read-only | current | This boolean attribute provides status information on the port, Valid values include 'up' (value 0x01) and 'down' (value 0x02). |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.10 | ColumnzxGponIpPortCfgDataAllowRemoteAccess | read-write | current | This boolean attribute indicates whether or not this IP port may be accessed remotely. The value TRUE means remote access is enabled. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.11 | ColumnzxGponIpPortCfgDataRouterIdPointer | read-write | current | This attribute identifies the IP router controlling the port, if it exists. This attribute points to the instance of the IP Router Service Profile. If no IP ro… |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.12 | ColumnzxGponIpPortCfgDataARPPointer | read-write | current | This attribute identifies the instance of ARP Service Profile associated with the IP port. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.13 | ColumnzxGponIpPortCfgDataEncapsulationMethod | read-write | current | This attribute identifies the frame encapsulation method that is used, Value 0x01: identification by ATM VC; value 0x02: LLC encapsulation, Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.14 | ColumnzxGponIpPortCfgDataMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.23.8.9.1.15 | ColumnzxGponIpPortCfgDataEntryStatus | read-create | current | This attribute can be create and delete. |
| 1.3.6.1.4.1.3902.1012.3.23.9 | NodecesUniMib | |||
| 1.3.6.1.4.1.3902.1012.3.23.9.1 | TablezxGponPPTPCesUniTable | not-accessible | current | This managed entity represents the points at a CES UNI in the ONT where physical paths terminate and physical path level functions are performed. |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1 | RowzxGponPPTPCesUniEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.1 | ColumnzxGponPPTPCesUniTPID | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the PPTP ces information Table. |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.2 | ColumnzxGponPPTPCesUniMeId | read-only | current | This attribute provides a unique number for each instance of this managed entity. This 2-byte number is directly associated with the physical position of the U… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.3 | ColumnzxGponPPTPCesUniExpectedType | read-write | current | Coding Contents Description 0 no LIM Default value 1 A1.5 ATM 1.544 Mbit/s module 2 A2 ATM 2.048 Mbit/s 3 A6.3 ATM 6.312 Mbit/s module 4 A6.3U ATM 6.312 Mbit/s… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.4 | ColumnzxGponPPTPCesUniSensedType | read-only | current | If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type' equals the value of 'Expected type'. If the value of 'Expected type' equa… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.5 | ColumnzxGponPPTPCesUniEesLoopback | read-write | current | This attribute represents the loopback configuration of the physical interface. Value 0x00: no loopback; value 0x01: payload loopback; value 0x02: line loopbac… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.6 | ColumnzxGponPPTPCesUniAdminState | read-write | current | This attribute is used to activate (unlock: value enabled) and deactivate (lock: value disabled) the functions performed by instances of this managed entity. S… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.7 | ColumnzxGponPPTPCesUniOperationalState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.8 | ColumnzxGponPPTPCesUniDS1Framing | read-only | current | This attribute indicates the framing structure used. Valid values are 'ExtendedSuperFrame,(0x01), 'SuperFrame' (0x02), 'UnFrame' (0x03), 'G.704' (0x04) and 'JT… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.9 | ColumnzxGponPPTPCesUniEncoding | read-write | current | This attribute denotes the encoding scheme required. Valid values are 'B8ZS'(value 0x01), 'AMI' (value 0x02), 'HDB3' (0x03), and 'B3ZS' (0x04). Upon autonomous… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.10 | ColumnzxGponPPTPCesUniLineLength | read-write | current | This attribute provides the length of the twisted pair cable from the physicalPathTTP of type 'DS1' interface to the DSX1 cross-connect point or the length of … |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.11 | ColumnzxGponPPTPCesUniDS1Mode | read-write | current | This attribute indicates the mode of DS1 used. The valid values are 'Mode#1'(value 0x00), 'Mode#2' (value 0x01), 'Mode#3' (value 0x02), and 'Mode#4' (value 0x0… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.12 | ColumnzxGponPPTPCesUniARC | read-write | current | It is used to control alarm reporting from this ONT(managed entity). off means alarm reporting allowed immediately and on means alarm reporting inhibited, unti… |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.13 | ColumnzxGponPPTPCesUniARCInterval | read-write | current | It provides a provisionable length of time. Units are given in minutes. It may be created/read/written/modified.Writing or modifing can be done when the entry … |
| 1.3.6.1.4.1.3902.1012.3.23.9.1.1.14 | ColumnzxGponPPTPCesUniLineType | read-write | current | This attribute denotes the line type used in the application for DS3 or E3 interfaces. Valid values are: 0x00, Other; 0x01, ds3m23; 0x02, ds3syntran; 0x03, ds3… |
| 1.3.6.1.4.1.3902.1012.3.23.9.2 | TablezxGponCESSPInfoTable | not-accessible | current | An instance of this managed entity is used to organize data that describe the CES Service functions of the ONT. An instance of this managed entity shall be cre… |
| 1.3.6.1.4.1.3902.1012.3.23.9.2.1 | RowzxGponCESSPInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.23.9.2.1.1 | ColumnzxGponCESSPInfoMeIdIdx | not-accessible | current | This attribute provides a unique number for the instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.23.9.2.1.2 | ColumnzxGponCESSPInfoMBufferedCDVTolerance | read-write | current | This attribute represents the duration of user data that must be buffered by the CES interworking entity to offset the Cell Delay Variation. This timing will b… |
| 1.3.6.1.4.1.3902.1012.3.23.9.2.1.3 | ColumnzxGponCESSPInfoChannelAssociatedSignalling | read-only | current | This attribute selects which AAL 1 format should be used. It applies to structured interfaces only. For unstructured interfaces, this value, if present, must b… |
| 1.3.6.1.4.1.3902.1012.3.23.9.2.1.4 | ColumnzxGponCESSPInfoMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.23.9.2.1.5 | ColumnzxGponCESSPInfoEntryStatus | read-create | current | This attribute can be create,modify and delete. |
| 1.3.6.1.4.1.3902.1012.3.23.12 | TablezxGponGemIWTPInfoTable | not-accessible | current | An instance of this managed entity represents a point in the ONT where the interworking of a service (e.g., CES, IP) or underlying physical infrastructure (e.g… |
| 1.3.6.1.4.1.3902.1012.3.23.12.1 | RowzxGponGemIWTPInfoEntry | not-accessible | current | Instances of this managed entity are created and deleted by the ONT on request of the OLT. |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.1 | ColumnzxGponGemIWTPInfoMeIdIdx | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the UNI management, from 1 to M. his attribute provides a unique number for each instance of this man… |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.2 | ColumnzxGponGemIWTPInfoPNCTPConnectivityPtr | read-write | current | This attribute provides an instance identifier of the GEM Port Network CTP that is associated with this GEM Interworking Termination Point. |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.3 | ColumnzxGponGemIWTPInfoIwOption | read-write | current | It identifies the type of non-GEM function that is being interworked; the option can be CES (1) or MAC Bridge LAN (2).It may be created/read/written/modified. … |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.4 | ColumnzxGponGemIWTPInfoServiceProPtr | read-write | current | It provides the service profile type and a pointer to the instance of a service profile, such as the CES Service ProfileB-PON (if the zxGponGemIwTPTempletIwOpt… |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.5 | ColumnzxGponGemIWTPInfoITPPtr | read-write | current | This attribute provides a pointer to the associated instance(s) of the following managed entities (depending on the service provided). |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.6 | ColumnzxGponGemIWTPInfoPPTPCounter | read-only | current | This attribute represents the number of instances of PPTP managed entities associated with this instance of the GEM Interworking Termination Point managed enti… |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.7 | ColumnzxGponGemIWTPInfoOpState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.8 | ColumnzxGponGemIWTPInfoGALProPtr | read-write | current | For GEM mode, it provides the GAL profile type and a pointer to an instance of a GAL Profile such as GAL TDM Profile if the zxGponGemIwTPTempletIwOption = 0 or… |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.9 | ColumnzxGponGemIWTPInfoGEMLoopbackCfg | read-write | current | This attribute is used to set the loopback configuration when using GEM mode. |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.10 | ColumnzxGponGemIWTPInfoMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.23.12.1.11 | ColumnzxGponGemIWTPInfoEntryStatus | read-create | current | This attribute can be create and delete. |
| 1.3.6.1.4.1.3902.1012.3.23.13 | TablezxGponGemIWTPAlarmTable | not-accessible | current | An instance of this managed entity represents a point in the ONT where the interworking of a service (e.g., CES, IP) or underlying physical infrastructure (e.g… |
| 1.3.6.1.4.1.3902.1012.3.23.13.1 | RowzxGponGemIWTPAlarmEntry | not-accessible | current | Instances of this managed entity are created and deleted by the ONT on request of the OLT. |
| 1.3.6.1.4.1.3902.1012.3.23.13.1.1 | ColumnzxGponGemIWTPAlarmIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the UNI management, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.23.13.1.2 | ColumnzxGponGemIWTPAlarmMeId | read-only | current | This attribute provides a unique number for each instance of this managed entity. This number is directly associated with the physical position of the UNI. |
| 1.3.6.1.4.1.3902.1012.3.23.13.1.3 | ColumnzxGponGemIWTPGFSAAlarm | read-only | current | It is used to Indicate that GEM Frame Starve Alarm. When this is true(1) meadn that the Alarm is presented, when false(2), mean there is no this alarm. |
| 1.3.6.1.4.1.3902.1012.3.23.13.1.4 | ColumnzxGponGemIWTPGFSAAlarmMask | read-write | current | Indicates whether the occurence of zxGponGemITPGFSAAlarm alarm should result in NE generated by the agent layer. When this is false(2) it should be generated; … |
| 1.3.6.1.4.1.3902.1012.3.24 | NodezxGponConnMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.24.1 | TablezxGponGemPNCTPInfoTable | not-accessible | current | This managed entity is used to represent the termination of GEM ports on an ONT. |
| 1.3.6.1.4.1.3902.1012.3.24.1.1 | RowzxGponGemPNCTPInfoEntry | not-accessible | current | Instances of the GEM Port Network CTP managed entity will be created on demand of the OLT as a consequence of action 'create' on the GEM Port Network CTP manag… |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.1 | ColumnzxGponGemPNCTPInfoMeIdIdx | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the ONT equipment, from 1 to M, it is MeId. |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.2 | ColumnzxGponGemPNCTPInfoPortId | read-write | current | This attribute identifies the PortID associated with the GEM port being terminated. |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.3 | ColumnzxGponGemPNCTPInfoPONTCAdapterGPtr | read-write | current | This attribute associates the GEM Port Network CTP ME with the PON TC Adapter-G ME. It points to the connected PON TC Adapter-G instance id. If use template, t… |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.4 | ColumnzxGponGemPNCTPInfoDirection | read-write | current | It specifies whether the GEM port is used for UNI-to-ANI (uni2uni(1)), ANI-to-UNI( ani2uni(2)), or bidirectional (bidirectional(3)) connection. It may be creat… |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.5 | ColumnzxGponGemPNCTPInfoPriorityUpstream | read-write | current | This attribute points to the instance of the Priority Queue-G ME used for this GEM Port Network CTP ME in the upstream direction. It is used when the Traffic M… |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.6 | ColumnzxGponGemPNCTPInfoPriorityDownstream | read-write | current | This attribute points to the instance of the Priority Queue-G used for this GEM Port Network CTP in the downstream direction. It is used when the Traffic Manag… |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.7 | ColumnzxGponGemPNCTPInfoTDescProfPtr | read-write | current | It serves as a pointer to the instance of the Traffic Descriptor Profile managed entity that contains the traffic parameters used for this GEM Port Network CTP… |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.8 | ColumnzxGponGemPNCTPInfoUniCounter | read-only | current | This attribute represents the number of instances of UNI-G managed entity associated with an instance of the GEM Port Network CTP managed entity. If only one i… |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.9 | ColumnzxGponGemPNCTPInfoMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.24.1.1.10 | ColumnzxGponGemPNCTPInfoEntryStatus | read-create | current | This attribute can be create and delete. |
| 1.3.6.1.4.1.3902.1012.3.24.2 | TablezxGponGemPNCTPAlarmCfgTable | not-accessible | current | This managed entity is used to represent the termination of GEM ports on an ONT. |
| 1.3.6.1.4.1.3902.1012.3.24.2.1 | RowzxGponGemPNCTPAlarmCfgEntry | not-accessible | current | Instances of the GEM Port Network CTP managed entity will be created on demand of the OLT as a consequence of action 'create' on the GEM Port Network CTP manag… |
| 1.3.6.1.4.1.3902.1012.3.24.2.1.1 | ColumnzxGponGemPNCTPAlarmCfgMeId | read-only | current | A unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.24.2.1.2 | ColumnzxGponGemPNCTPAlarmCfgE2eLossContinuity | read-only | current | Loss of continuity can be detected when the GEM Port Network CTP supports a GEM Interworking Termination Point. set this attribute is true(1) if End to end los… |
| 1.3.6.1.4.1.3902.1012.3.24.2.1.3 | ColumnzxGponGemPNCTPAlarmCfgE2eLossContinuityMask | read-write | current | Indicates whether the occurence of zxGponGemPNCTPAlarmCfgE2eLossContinuity alarm should result in NE generated by the agent layer. When this is false(2) it is … |
| 1.3.6.1.4.1.3902.1012.3.24.3 | TablezxGponGemPPPMHDInfoTable | not-accessible | current | This managed entity is used to collect and report performance monitoring data associated with a GEM Port Network CTP for the last completed 15-minute interval. |
| 1.3.6.1.4.1.3902.1012.3.24.3.1 | RowzxGponGemPPPMHDInfoEntry | not-accessible | current | This managed entity is used to collect and report performance monitoring data associated with a GEM Port Network CTP for the last completed 15-minute interval. |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.1 | ColumnzxGponGemPPPMHDInfoMeIdIdx | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the performance monitoring data reporting, from 1 to M. This attribute provides a unique number for e… |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.2 | ColumnzxGponGemPPPMHDInfoIntervalEndTime | read-only | current | This attribute identifies the most recently finished 15-minute interval. It is a cyclic counter (modulo 0x100 (256)) that is incremented each time a new interv… |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.3 | ColumnzxGponGemPPPMHDInfoThresholdDataID | read-write | current | This attribute provides a pointer to instances of the Threshold Data 1 and 2 managed entities that contain the threshold values for the performance monitoring … |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.4 | ColumnzxGponGemPPPMHDInfoLostPackets | read-only | current | This attribute measures background packet loss. It cannot distinguish between packets lost because of header bit errors or buffer overflows. It records only lo… |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.5 | ColumnzxGponGemPPPMHDInfoMisinsertedPackets | read-only | current | This attribute is used to measure occurrences of when a packet is misrouted to an active GEM port that is being monitored. The unit of this counter is GEM fram… |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.6 | ColumnzxGponGemPPPMHDInfoReceivedPackets | read-only | current | This attribute provides a count of all packets that are correctly received at the monitored GEM port. The unit of this counter is GEM frame. |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.7 | ColumnzxGponGemPPPMHDInfoReceivedBlocks | read-only | current | This attribute provides a count of all blocks that are correctly received at the monitored GEM port. The unit of this counter is GEM block length. |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.8 | ColumnzxGponGemPPPMHDInfoTransmittedBlocks | read-only | current | This attribute provides a count of all blocks that are originated at a monitored connection by the transmitting end point (i.e., backward reporting is assumed)… |
| 1.3.6.1.4.1.3902.1012.3.24.3.1.9 | ColumnzxGponGemPPPMHDInfoImpairedBlocks | read-only | current | This severely errored data block counter will be incremented whenever one of the following events takes place: the number of misinserted packets exceeds M(misi… |
| 1.3.6.1.4.1.3902.1012.3.24.4 | TablezxGponGemPPPMHDAlarmCfgTable | not-accessible | current | This notification is used to notify the management system when a threshold crossing alert (TCA) is detected or cleared. The TCA change notification 'on' will b… |
| 1.3.6.1.4.1.3902.1012.3.24.4.1 | RowzxGponGemPPPMHDAlarmCfgEntry | not-accessible | current | This notification is used to notify the management system when a threshold crossing alert (TCA) is detected or cleared. The TCA change notification 'on' will b… |
| 1.3.6.1.4.1.3902.1012.3.24.4.1.1 | ColumnzxGponGemPPPMHDAlarmCfgMeId | read-only | current | An arbitrary(unique) integer for identifiying an entry in the ONT equipment, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.24.4.1.2 | ColumnzxGponGemPPPMHDAlarmCfgLosPkgs | read-only | current | Lost packets exceeds threshold alarm. If the lost packets exceeds threshold event occured, this value is true(1), otherwise, this value is false(2). |
| 1.3.6.1.4.1.3902.1012.3.24.4.1.3 | ColumnzxGponGemPPPMHDAlarmCfgLosPkgsMask | read-write | current | The mask bit for lost packets exceeds threshold alarm. |
| 1.3.6.1.4.1.3902.1012.3.24.4.1.4 | ColumnzxGponGemPPPMHDAlarmCfgMisInsertPkgs | read-only | current | Misinserted packets exceeds threshold alarm. If the misinserted packets exceeds threshold event occured, this value is true(1), otherwise, this value is false(… |
| 1.3.6.1.4.1.3902.1012.3.24.4.1.5 | ColumnzxGponGemPPPMHDAlarmCfgMisInsertPkgsMask | read-write | current | The mask birt for misinserted packets exceeds threshold alarm. |
| 1.3.6.1.4.1.3902.1012.3.24.4.1.6 | ColumnzxGponGemPPPMHDAlarmCfgImpairBlks | read-only | current | Impaired blocks exceeds threshold alarm. If the impaired blocks exceeds threshold event occured, this value is true(1), otherwise, this value is false(2). |
| 1.3.6.1.4.1.3902.1012.3.24.4.1.7 | ColumnzxGponGemPPPMHDAlarmCfgImpairBlksMask | read-write | current | The mask birt for impaired blocks exceeds threshold alarm. |
| 1.3.6.1.4.1.3902.1012.3.25 | NodezxGponTrafficMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.25.1 | TablezxGponPriorityQueueTable | not-accessible | current | This managed entity specifies the priority queue in the ONT that is used for the VP Network CTP-G or GEM Port Network CTP. If N priority queues reside in the O… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1 | RowzxGponPriorityQueueEntry | not-accessible | current | One or more instances of this managed entity are contained in the ONT-G managed entity to model the upstream priority queues if the Traffic Management Option a… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.1 | ColumnzxGponPriorQueueIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the Ani manangement, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.2 | ColumnzxGponPriorQueueMeId | read-only | current | This attribute provides a unique number for each instance of this managed entity. The most significant bit represents the direction (0b1: Upstream, 0b0: Downst… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.3 | ColumnzxGponPriorQueueCfgOption | read-only | current | This attribute identifies the buffer-partitioning policy. The value of 0x01 means that all the queues share one buffer size of Maximum Queue Size and the value… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.4 | ColumnzxGponPriorQueueMaxQueueSize | read-only | current | This attribute specifies the maximum size of the queue. Units are cells for ATM mode and 'GEM block lengths' for GEM mode. |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.5 | ColumnzxGponPriorQueueAllocSize | read-write | current | It identifies the allocated size of this queue. Units are cells for ATM mode and 'GEM block lengths' for GEM mode.It may be created/read/written/ modified.Writ… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.6 | ColumnzxGponPriorQueueInterval | read-write | current | It represents the interval in milliseconds at which the counter resets itself. It may be created/read/written/modified.Writing or modifing can be done when the… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.7 | ColumnzxGponPriorQueueBufOverflowThreshold | read-write | current | The threshold for the number of cells or GEM block lengths discarded on this queue due to buffer overflow.It may be created/read/written/modified.Writing or mo… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.8 | ColumnzxGponPriorQueueRelatedPort | read-only | current | This attribute represents the slot, port/T-CONT and priority information that is associated with the instance of Priority Queue-G ME. This attribute consists o… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.9 | ColumnzxGponPriorQueueTrafficSchedulerGPtr | read-write | current | This attribute represents the Traffic Scheduler-G ME instance that is directly associated with this priority queue. Upon autonomous instantiation, this attribu… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.10 | ColumnzxGponPriorQueueWeight | read-write | current | It represents weight for WRR. This weight is used by the Traffic Scheduler or T-CONT (whose Policy is WRR) indicated by the Traffic Scheduler-G pointer attribu… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.11 | ColumnzxGponPriorQueueBackPressureAdmin | read-write | current | It is used to activate (true: value 1) or deactivate (false: value 2) the functions of Back Pressure operation.It may be created/read/written/modified.Writing … |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.12 | ColumnzxGponPriorQueueBackPressureTime | read-write | current | It indicates the time duration in which the customer terminal temporarily suspends sending data. This instance presents the duration in microseconds. It can be… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.13 | ColumnzxGponPriorQueueBackPressAssertThresh | read-write | current | It identifies the threshold size of this queue to start sending Back Pressure signal.It may be created/read/written/modified.Writing or modifing can be done wh… |
| 1.3.6.1.4.1.3902.1012.3.25.1.1.14 | ColumnzxGponPriorQueueBackPressClearThresh | read-write | current | It identifies the threshold size of this queue to stop sending Back Pressure signal.It may be created/read/written/modified.Writing or modifing can be done whe… |
| 1.3.6.1.4.1.3902.1012.3.25.2 | TablezxGponPriorityQueueAlarmCfgTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.25.2.1 | RowzxGponPriorityQueueAlarmCfgEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.25.2.1.1 | ColumnzxGponPriorQueueAlarmIndex | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.25.2.1.2 | ColumnzxGponPriorQueueAlarmMeId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.25.2.1.3 | ColumnzxGponPriorQueueAlarmCellLosThresh | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.25.2.1.4 | ColumnzxGponPriorQueueAlarmCellLosThreshMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.25.3 | TablezxGponTrafficScheduleTable | not-accessible | current | An instance of this managed entity represents a logical object of some Traffic Scheduler to control upstream ATM cells or GEM packets. A Traffic Scheduler can … |
| 1.3.6.1.4.1.3902.1012.3.25.3.1 | RowzxGponTrafficScheduleEntry | not-accessible | current | G.984.4 Section 9.5.2 |
| 1.3.6.1.4.1.3902.1012.3.25.3.1.1 | ColumnzxGponTrafficScheduleIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the Ani manangement, from 1 to M. |
| 1.3.6.1.4.1.3902.1012.3.25.3.1.2 | ColumnzxGponTrafficScheduleMeId | read-only | current | This attribute provides a unique number for each instance of this managed entity. This 2-byte number is associated with the physical capability that realizes t… |
| 1.3.6.1.4.1.3902.1012.3.25.3.1.3 | ColumnzxGponTrafficScheduleTCountPtr | read-only | current | This attribute represents the T-CONT ME instance that is directly associated with this Traffic Scheduler. This pointer is used when this Traffic Scheduler is c… |
| 1.3.6.1.4.1.3902.1012.3.25.3.1.4 | ColumnzxGponTrafficScheduleOtherPtr | read-only | current | This attribute represents the Traffic Scheduler-G ME instance that serves this Traffic Scheduler. Upon autonomous instantiation this attribute is null (0x0000)… |
| 1.3.6.1.4.1.3902.1012.3.25.3.1.5 | ColumnzxGponTrafficSchedulePolicy | read-only | current | This attribute represents scheduling policy. Valid values include but are not limited to 'Null' (value 0x03), 'HOL' (value 0x01) or 'WRR' (value 0x02). Upon au… |
| 1.3.6.1.4.1.3902.1012.3.25.3.1.6 | ColumnzxGponTrafficSchedulePriWeight | read-write | current | It represents priority for HOL scheduling or the weight for WRR scheduling. This value is used by the T-CONT or Traffic Scheduler indicated by the T-CONT Point… |
| 1.3.6.1.4.1.3902.1012.3.25.4 | TablezxGponGemTrafficDescriptorsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.25.4.1 | RowzxGponGemTrafficDescriptorsEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.25.4.1.1 | ColumnzxGponGemTrafficDescriptorsMeIdIdx | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.25.4.1.2 | ColumnzxGponGemTrafficDescriptorsSIR | read-write | current | It is SIR (Sustained Information Rate). The unit of Kbps. It may be created/read/ written/modified.Writing or modifing can be done when the entry SHOULD NOT be… |
| 1.3.6.1.4.1.3902.1012.3.25.4.1.3 | ColumnzxGponGemTrafficDescriptorsPIR | read-write | current | It is PIR (Peak Information Rate). The unit of Kbps. It may be created/read/written/ modified.Writing or modifing can be done when the entry SHOULD NOT be used… |
| 1.3.6.1.4.1.3902.1012.3.25.4.1.4 | ColumnzxGponGemTrafficDescriptorsMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.25.4.1.5 | ColumnzxGponGemTrafficDescriptorsEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.26 | NodezxGponProfileMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.26.1 | TablezxGponBandwidthProfileTable | not-accessible | current | Bandwidth allocation for one T-CONT in some ONT. these bandwidths as following: fixed bandwidth ab. FBW assured bandwidth ab. ABW non-assured bandwidth ab. NAB… |
| 1.3.6.1.4.1.3902.1012.3.26.1.1 | RowzxGponBandwidthProfileEntry | not-accessible | current | An entry in the Bandwidth profile table. |
| 1.3.6.1.4.1.3902.1012.3.26.1.1.1 | ColumnzxGponBWProfileIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the line card, from 1 to M, M is equal to 512. |
| 1.3.6.1.4.1.3902.1012.3.26.1.1.2 | ColumnzxGponBWProfileName | read-write | current | The Bandwidth Profile Name.It may be created/read/written/modified. Writing or modifing can be done all the time. |
| 1.3.6.1.4.1.3902.1012.3.26.1.1.3 | ColumnzxGponBWProfileFixed | read-write | current | The Fixed Bandwidth is entirely reserved and cyclically allocated in order to achieve a low traffic transfer delay.The unit of kbps.It may be created /read/wri… |
| 1.3.6.1.4.1.3902.1012.3.26.1.1.4 | ColumnzxGponBWProfileAssured | read-write | current | The Assured Bandwidth is bandwidth that is always available to the ONU/ONT if the T-CONT buffer is expected to have traffic to transmit. If the T-CONT buffer d… |
| 1.3.6.1.4.1.3902.1012.3.26.1.1.5 | ColumnzxGponBWProfileMaximum | read-write | current | The Maximum Bandwidth.The unit of kbps.It may be created/read/written/modified. Writing or modifing can be done when the entry SHOULD NOT be used by any other … |
| 1.3.6.1.4.1.3902.1012.3.26.1.1.6 | ColumnzxGponBWProfileType | read-write | current | Type 1 is characterized by Fixed bandwidth only; Type 2 is characterized by Assured bandwidth only; Type 3 has Assured bandwidth and Non-assured bandwidth; Typ… |
| 1.3.6.1.4.1.3902.1012.3.26.1.1.7 | ColumnzxGponBWProfileRefCnt | read-only | current | Indicate the reference count of this BW profile. |
| 1.3.6.1.4.1.3902.1012.3.26.1.1.8 | ColumnzxGponBWProfileEntryStatus | read-create | current | The control that allows creation and deletion of entries. Deleting can be done when the entry SHOULD NOT be used by any other entry. |
| 1.3.6.1.4.1.3902.1012.3.26.2 | TablezxGponTrafficProfileTable | not-accessible | current | Rate configuration for one traffic. As following: sustainable information rate ab. SIR peak information rate ab. PIR |
| 1.3.6.1.4.1.3902.1012.3.26.2.1 | RowzxGponTrafficProfileEntry | not-accessible | current | An entry in the Traffic profile table. |
| 1.3.6.1.4.1.3902.1012.3.26.2.1.1 | ColumnzxGponTrafficProfileIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the line card, from 1 to M, M is equal to 512. |
| 1.3.6.1.4.1.3902.1012.3.26.2.1.2 | ColumnzxGponTrafficProfileName | read-write | current | The Traffic Profile Name.It may be created/read/written/modified. Writing or modifing can be done all the time. |
| 1.3.6.1.4.1.3902.1012.3.26.2.1.3 | ColumnzxGponTrafficProfileSir | read-write | current | The SIR is sustainable rate of the traffic. Writing or modifing can be done when the entry SHOULD NOT be used by any other entry. |
| 1.3.6.1.4.1.3902.1012.3.26.2.1.4 | ColumnzxGponTrafficProfilePir | read-write | current | The PIR is peak rate of the traffic. Writing or modifing can be done when the entry SHOULD NOT be used by any other entry. |
| 1.3.6.1.4.1.3902.1012.3.26.2.1.5 | ColumnzxGponTrafficProfileRefCnt | read-only | current | The reference count of this profile. |
| 1.3.6.1.4.1.3902.1012.3.26.2.1.6 | ColumnzxGponTrafficProfileEntryStatus | read-create | current | The control that allows creation and deletion of entries. Deleting can be done when the entry SHOULD NOT be used by any other entry. |
| 1.3.6.1.4.1.3902.1012.3.26.3 | TablezxGponThresholdDataProfileTable | not-accessible | current | It represents threshold values for the performance monitoring parameters. |
| 1.3.6.1.4.1.3902.1012.3.26.3.1 | RowzxGponThresholdDataProfileEntry | not-accessible | current | It provide a Threshold Data pointer. |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.1 | ColumnzxGponThresholdDataProfileIndex | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the Threshold Data, from 1 to M, M is equal to 128. |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.2 | ColumnzxGponThresholdDataProfileName | read-write | current | The Threshold Data Templet Name.It may be created/read/written/modified. Writing or modifing can be done all the time. |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.3 | ColumnzxGponThresholdDataProfileVal1 | read-write | current | It provides the associated threshold value for the 1st thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.4 | ColumnzxGponThresholdDataProfileVal2 | read-write | current | It provides the associated threshold value for the 2nd thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.5 | ColumnzxGponThresholdDataProfileVal3 | read-write | current | It provides the associated threshold value for the 3rd thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.6 | ColumnzxGponThresholdDataProfileVal4 | read-write | current | It provides the associated threshold value for the 4th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.7 | ColumnzxGponThresholdDataProfileVal5 | read-write | current | It provides the associated threshold value for the 5th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.8 | ColumnzxGponThresholdDataProfileVal6 | read-write | current | It provides the associated threshold value for the 6th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.9 | ColumnzxGponThresholdDataProfileVal7 | read-write | current | It provides the associated threshold value for the 7st thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.10 | ColumnzxGponThresholdDataProfileVal8 | read-write | current | It provides the associated threshold value for the 8th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.11 | ColumnzxGponThresholdDataProfileVal9 | read-write | current | It provides the associated threshold value for the 9th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wri… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.12 | ColumnzxGponThresholdDataProfileVal10 | read-write | current | It provides the associated threshold value for the 10th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.13 | ColumnzxGponThresholdDataProfileVal11 | read-write | current | It provides the associated threshold value for the 11th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.14 | ColumnzxGponThresholdDataProfileVal12 | read-write | current | It provides the associated threshold value for the 12th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.15 | ColumnzxGponThresholdDataProfileVal13 | read-write | current | It provides the associated threshold value for the 13th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.16 | ColumnzxGponThresholdDataProfileVal14 | read-write | current | It provides the associated threshold value for the 14th thresholded counter in the History Data type managed entity. It may be created/read/written/modified.Wr… |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.17 | ColumnzxGponThresholdDataProfileRefCnt | read-only | current | The reference count of this profile. |
| 1.3.6.1.4.1.3902.1012.3.26.3.1.18 | ColumnzxGponThresholdDataProfileEntryStatus | read-create | current | The control that allows creation and deletion of entries. Deleting can be done when the entry SHOULD NOT be used by any other entry. |
| 1.3.6.1.4.1.3902.1012.3.27 | NodezxGponStandardOnu | |||
| 1.3.6.1.4.1.3902.1012.3.27.3 | TablezxGponOnuEncryptTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.3.1 | RowzxGponOnuEncryptEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.3.1.1 | ColumnzxGponOnuEncryptDir | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.3.1.2 | ColumnzxGponOnuEncryptEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.3.1.3 | ColumnzxGponOnuEncryptMode | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.4 | TablezxGponPortIdEncryptTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.4.1 | RowzxGponPortIdEncryptEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.4.1.1 | ColumnzxGponPortIdEncryptEnable | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6 | TablezxGponOnuAlarmStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1 | RowzxGponOnuAlarmStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.1 | ColumnzxGponOnuAlarmLOSd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.2 | ColumnzxGponOnuAlarmLOSdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.3 | ColumnzxGponOnuAlarmLOFd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.4 | ColumnzxGponOnuAlarmLOFdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.5 | ColumnzxGponOnuAlarmSFd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.6 | ColumnzxGponOnuAlarmSFdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.7 | ColumnzxGponOnuAlarmSDd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.8 | ColumnzxGponOnuAlarmSDdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.9 | ColumnzxGponOnuAlarmLCDAd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.10 | ColumnzxGponOnuAlarmLCDAdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.11 | ColumnzxGponOnuAlarmLCDGd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.12 | ColumnzxGponOnuAlarmLCDGdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.13 | ColumnzxGponOnuAlarmTFd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.14 | ColumnzxGponOnuAlarmTFdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.15 | ColumnzxGponOnuAlarmSUFd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.16 | ColumnzxGponOnuAlarmSUFdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.17 | ColumnzxGponOnuAlarmMEMd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.18 | ColumnzxGponOnuAlarmMEMdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.19 | ColumnzxGponOnuAlarmDACTd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.20 | ColumnzxGponOnuAlarmDACTdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.21 | ColumnzxGponOnuAlarmDISd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.22 | ColumnzxGponOnuAlarmDISdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.23 | ColumnzxGponOnuAlarmMISd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.24 | ColumnzxGponOnuAlarmMISdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.25 | ColumnzxGponOnuAlarmPEEd | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.26 | ColumnzxGponOnuAlarmPEEdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.27 | ColumnzxGponOnuAlarmRDId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.6.1.28 | ColumnzxGponOnuAlarmRDIdMask | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.7 | TablezxGponSignalThresholdTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.7.1 | RowzxGponSignalThresholdEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.7.1.1 | ColumnzxGponSignalThresholdSDd | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.7.1.2 | ColumnzxGponSignalThresholdSFd | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.27.8 | TablezxGponOnuPerfStatisticTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.8.1 | RowzxGponOnuPerfStatisticEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.27.8.1.1 | ColumnzxGponOnuPerfStatERRdCounter | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.8.1.2 | ColumnzxGponOnuPerfStatBIPErrCounter | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.27.9 | TablezxGponOnuWeightTable | not-accessible | current | This table represents ONU side configuration. |
| 1.3.6.1.4.1.3902.1012.3.27.9.1 | RowzxGponOnuWeightEntry | not-accessible | current | It is entry in the table zxGponOnuWeightTable. |
| 1.3.6.1.4.1.3902.1012.3.27.9.1.1 | ColumnzxGponOnuSchedulemode | read-write | current | COS Schedule mode. |
| 1.3.6.1.4.1.3902.1012.3.27.9.1.2 | ColumnzxGponOnuCos1Weight | read-write | current | Weight of COS1(0-100). |
| 1.3.6.1.4.1.3902.1012.3.27.9.1.3 | ColumnzxGponOnuCos2Weight | read-write | current | Weight of COS2(0-100). |
| 1.3.6.1.4.1.3902.1012.3.27.9.1.4 | ColumnzxGponOnuCos3Weight | read-write | current | Weight of COS3(0-100). |
| 1.3.6.1.4.1.3902.1012.3.27.9.1.5 | ColumnzxGponOnuCos4Weight | read-write | current | Weight of COS4(0-100). |
| 1.3.6.1.4.1.3902.1012.3.27.9.1.6 | ColumnzxGponOnuDownTrafficPtr | read-write | current | The ONU downstream traffic descriptor profile. |
| 1.3.6.1.4.1.3902.1012.3.28 | NodezxGponPrivateOnu | |||
| 1.3.6.1.4.1.3902.1012.3.28.1 | TablezxGponOntDevMgmtTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1 | RowzxGponOntDevMgmtEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.1 | ColumnzxGponOntDevMgmtTypeName | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.2 | ColumnzxGponOntDevMgmtName | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.3 | ColumnzxGponOntDevMgmtDescription | read-write | current | The definition size of description does not include the termination. |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.4 | ColumnzxGponOntDevMgmtRegisterId | read-write | current | Reserved. use in the future. |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.5 | ColumnzxGponOntDevMgmtProvisionSn | read-write | current | SN configed by Olt for the purpose of register |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.6 | ColumnzxGponOntDevMgmtPwMode | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.7 | ColumnzxGponOntDevMgmtPassword | read-write | current | password configed by Olt for the purpose of register |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.8 | ColumnzxGponOntTargetState | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.9 | ColumnzxGponOntDevMgmtEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.10 | ColumnzxGponOntIsAutoUpdate | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.11 | ColumnzxGponOntRegMode | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.28.1.1.12 | ColumnzxGponOntRegId | read-write | current | ID configed by Olt for the purpose of register |
| 1.3.6.1.4.1.3902.1012.3.28.2 | TablezxGponOntStateTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.2.1 | RowzxGponOntStateEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.2.1.1 | ColumnzxGponOntAdminState | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.28.2.1.2 | ColumnzxGponOntOmccState | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.2.1.3 | ColumnzxGponOntO1O7State | read-only | current | Unknown(DyingGasp), Initial-state(O1), Standby-state(O2), Power-Setup-state(O3), Serial-Number-state(O4), Ranging-state(O5), Operation-state(O6), POPUP-state(O… |
| 1.3.6.1.4.1.3902.1012.3.28.2.1.4 | ColumnzxGponOntPhaseState | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.3 | TablezxGponOntDevInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.3.1 | RowzxGponOntDevInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.3.1.1 | ColumnzxGponOntDevInfoSupportTcontNum | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.3.1.2 | ColumnzxGponOntDevInfoCurUsedTcontNum | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.3.1.3 | ColumnzxGponOntDevInfoSupportPortIdNum | read-only | current | Reserved. used in the future. |
| 1.3.6.1.4.1.3902.1012.3.28.3.1.4 | ColumnzxGponOntDevInfoCurUsedPortIdNum | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.3.1.5 | ColumnzxGponOntDevInfoPqNum | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.3.1.6 | ColumnzxGponOntDevInfoTsNum | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.3.1.7 | ColumnzxGponOntDevInfoServiceType | read-only | current | Reserved. used in the future. |
| 1.3.6.1.4.1.3902.1012.3.28.3.1.8 | ColumnzxGponOntDevInfoRealOnuId | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.4 | TablezxGponOntUniPortInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.4.1 | RowzxGponOntUniPortInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.1 | ColumnzxGponOntUniPortInfoTotalUniPorts | read-only | current | It is total UNI ports number in the ONT/ONU. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.2 | ColumnzxGponOntUniPortInfoE1Ports | read-only | current | It is total those UNI ports number, that it is E1. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.3 | ColumnzxGponOntUniPortInfoT1Ports | read-only | current | It is total those UNI ports number, that it is T1. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.4 | ColumnzxGponOntUniPortInfoSTMPorts | read-only | current | It is total those UNI ports number, that it is STM-1/STM-4 and so on. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.5 | ColumnzxGponOntUniPortInfoPOTSPorts | read-only | current | It is total those UNI ports number, that it is used telephone, such as n * 64K, or VOIP. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.6 | ColumnzxGponOntUniPortInfoEthPorts | read-only | current | It is total those UNI ports number, that it is used ethernet, such as FE/GE. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.7 | ColumnzxGponOntUniPortInfoRFPorts | read-only | current | It is total those UNI ports number, that it is used Radio Freqency(RF). |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.8 | ColumnzxGponOntUniPortInfoMoCAPorts | read-only | current | It is total those UNI ports number, that it is used MoCA. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.9 | ColumnzxGponOntUniPortInfoWiFiPorts | read-only | current | It is total those UNI ports number, that it is used WiFI. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.10 | ColumnzxGponOntUniPortInfoAdslPorts | read-only | current | It is total those UNI ports number, that it is used ADSL. |
| 1.3.6.1.4.1.3902.1012.3.28.4.1.11 | ColumnzxGponOntUniPortInfoVdslPorts | read-only | current | It is total those UNI ports number, that it is used VDSL. |
| 1.3.6.1.4.1.3902.1012.3.28.5 | TablezxGponOntPmStatisInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1 | RowzxGponOntPmStatisInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.1 | ColumnzxGponOntPmStatisInfoGemPacketTxLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.2 | ColumnzxGponOntPmStatisInfoGemPacketRxCorIdleLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.3 | ColumnzxGponOntPmStatisInfoGemPacketRxCorNoIdleLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.4 | ColumnzxGponOntPmStatisInfoGemPacketRxErrLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.5 | ColumnzxGponOntPmStatisInfoGemPayloadBytesRxLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.6 | ColumnzxGponOntPmStatisInfoEthPacketTxLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.7 | ColumnzxGponOntPmStatisInfoEthPacketRxCorLo | read-only | current | Reserved. used in the future. |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.8 | ColumnzxGponOntPmStatisInfoEthPacketRxErrLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.9 | ColumnzxGponOntPmStatisInfoOmciPacketTxLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.10 | ColumnzxGponOntPmStatisInfoOmciPacketRxLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.11 | ColumnzxGponOntPmStatisInfoOmciPacketRxCorLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.12 | ColumnzxGponOntPmStatisInfoOmciPacketRxErrLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.13 | ColumnzxGponOntPmStatisInfoPloamTxLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.14 | ColumnzxGponOntPmStatisInfoPloamRxCorLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.15 | ColumnzxGponOntPmStatisInfoPloamRxErrLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.16 | ColumnzxGponOntPmStatisInfoBipErrorRxLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.17 | ColumnzxGponOntPmStatisInfoERRLo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.5.1.18 | ColumnzxGponOntPmStatisInfoREILo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6 | TablezxGponOntPmStatisRealtimeInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1 | RowzxGponOntPmStatisRealtimeInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.1 | ColumnzxGponOntPmStatisInfoCorrectNonIdleGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.2 | ColumnzxGponOntPmStatisInfoCorrectIdleGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.3 | ColumnzxGponOntPmStatisInfoErroredGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.4 | ColumnzxGponOntPmStatisInfoGemPayloadBytesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.5 | ColumnzxGponOntPmStatisInfoCorrectEthernetFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.6 | ColumnzxGponOntPmStatisInfoErroredEthernetFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.7 | ColumnzxGponOntPmStatisInfoTotalOmciFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.8 | ColumnzxGponOntPmStatisInfoERRi | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.9 | ColumnzxGponOntPmStatisInfoREIi | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.10 | ColumnzxGponOntPmStatisInfoUnreceivedBurstsUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.11 | ColumnzxGponOntPmStatisInfoBipErrorUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.12 | ColumnzxGponOntPmStatisInfoCorrectedBitsUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.6.1.13 | ColumnzxGponOntPmStatisInfoNotCorrectedWordsUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7 | TablezxGponOntPmStatisHistoryInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1 | RowzxGponOntPmStatisHistoryInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.1 | ColumnzxGponOntPmStatisHistoryInfoCorrectNonIdleGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.2 | ColumnzxGponOntPmStatisHistoryInfoCorrectIdleGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.3 | ColumnzxGponOntPmStatisHistoryInfoErroredGemFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.4 | ColumnzxGponOntPmStatisHistoryInfoGemPayloadBytesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.5 | ColumnzxGponOntPmStatisHistoryInfoCorrectEthernetFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.6 | ColumnzxGponOntPmStatisHistoryInfoErroredEthernetFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.7 | ColumnzxGponOntPmStatisHistoryInfoTotalOmciFramesUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.8 | ColumnzxGponOntPmStatisHistoryInfoERRi | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.9 | ColumnzxGponOntPmStatisHistoryInfoREIi | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.10 | ColumnzxGponOntPmStatisHistoryInfoUnreceivedBurstsUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.11 | ColumnzxGponOntPmStatisHistoryInfoBipErrorUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.12 | ColumnzxGponOntPmStatisHistoryInfoCorrectedBitsUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.7.1.13 | ColumnzxGponOntPmStatisHistoryInfoNotCorrectedWordsUpstream | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.28.8 | TablezxGponOntLoopbackTestInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.8.1 | RowzxGponOntLoopbackTestInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.28.8.1.1 | ColumnzxGponOntLoopbackTestStart | read-write | current | 1:start loopback test 2:stop loopback test |
| 1.3.6.1.4.1.3902.1012.3.30 | NodezxGponServiceMgmt | |||
| 1.3.6.1.4.1.3902.1012.3.30.1 | TablezxOnuTrafficMgmtUnitTable | not-accessible | current | This table represents ONU's traffic management unit information including T-CONT and user bandwidth management unit. |
| 1.3.6.1.4.1.3902.1012.3.30.1.1 | RowzxOnuTrafficMgmtUnitEntry | not-accessible | current | It is entry in the zxOnuTrafficMgmtUnitTable. |
| 1.3.6.1.4.1.3902.1012.3.30.1.1.1 | ColumnzxOnuTrafficMgmtUnitTcontIdx | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the table, from 1 to N. |
| 1.3.6.1.4.1.3902.1012.3.30.1.1.2 | ColumnzxOnuTrafficMgmtUnitName | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.30.1.1.3 | ColumnzxOnuTrafficMgmtUnitTcontUpBWIdxPtr | read-write | current | This attribute is the index of templet used by T-CONT BW configuration. |
| 1.3.6.1.4.1.3902.1012.3.30.1.1.4 | ColumnzxOnuTrafficMgmtUnitAllocId | read-write | current | This attribute is the allocid of tcont,value range is [256..4095]. |
| 1.3.6.1.4.1.3902.1012.3.30.1.1.5 | ColumnzxOnuTrafficMgmtUnitUsedPortIdNum | read-only | current | The number of portId using this BW management unit. |
| 1.3.6.1.4.1.3902.1012.3.30.1.1.6 | ColumnzxOnuTrafficMgmtUnitUsedFlowNum | read-only | current | The number of flow using this BW management unit. |
| 1.3.6.1.4.1.3902.1012.3.30.1.1.7 | ColumnzxOnuTrafficMgmtUnitUsedCos | read-only | current | The integer in binary mode indicates the used COS(0-3). |
| 1.3.6.1.4.1.3902.1012.3.30.1.1.8 | ColumnzxOnuTrafficMgmtUnitEntryStatus | read-create | current | This entry can be create modified and delete. |
| 1.3.6.1.4.1.3902.1012.3.30.2 | TablezxGponGemPortTable | not-accessible | current | This table represents ONU side configuration. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1 | RowzxGponGemPortEntry | not-accessible | current | It is entry in the table zxGponGemPortTable. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.1 | ColumnzxGponGemPortIdx | not-accessible | current | An arbitrary(unique) integer for identifiying an entry in the table. It is the virtual portid index |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.2 | ColumnzxGponGemPortName | read-write | current | This attribute specifies the name of the GEM port. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.3 | ColumnzxGponGemPortType | read-write | current | This attribute specifies the type of the GEM port. Only 'unicast' is supported at present. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.4 | ColumnzxGponGemPortTcontIdx | read-write | current | It is equal to the 'zxOnuTrafficMgmtUnitTcontIdx' of 'zxOnuTrafficMgmtUnitTable'. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.5 | ColumnzxGponGemPortDirection | read-write | current | This attribute specifies the type of the direction of GEM port. Default value is 'bidirection'. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.6 | ColumnzxGponGemPortUpTrafficPtr | read-write | current | The GEM PORT upstream traffic descriptor profile. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.7 | ColumnzxGponGemPortDownTrafficPtr | read-write | current | The GEM PORT downstream traffic descriptor profile. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.8 | ColumnzxGponGemPortPortId | read-write | current | portid of gemport([65..1023]). |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.9 | ColumnzxGponGemPortDefaultCosType | read-write | current | The default COS. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.10 | ColumnzxGponGemPortEntryStatus | read-create | current | This entry can be create modified and delete. |
| 1.3.6.1.4.1.3902.1012.3.30.2.1.11 | ColumnzxGponGemPortUpQueue | read-write | current | The GEM PORT up queue,value scope for 0 to 7 and default is 0. |
| 1.3.6.1.4.1.3902.1012.3.30.5 | TablezxGponGemPortBasicTable | not-accessible | current | This table represents basic information of GEM Port, mainly CTP and IWTP which are the same regardless of connection of type. |
| 1.3.6.1.4.1.3902.1012.3.30.5.1 | RowzxGponGemPortBasicEntry | not-accessible | current | It is entry in the table zxGponGemPortBasicTable. |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.1 | ColumnzxGponGemBasicPNCTPInfoDirection | read-write | current | It specifies whether the GEM port is used for UNI-to-ANI (uni2uni(1)), ANI-to-UNI( ani2uni(2)), or bidirectional (bidirectional(3)) connection. It may be creat… |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.2 | ColumnzxGponGemBasicPNCTPInfoPriorityUpstreamID | read-write | current | This attribute points to the instance of the Priority Queue-G ME used for this GEM Port Network CTP ME in the upstream direction. It is used when the Traffic M… |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.3 | ColumnzxGponGemBasicPNCTPInfoPriorityDownstreamID | read-write | current | This attribute points to the instance of the Priority Queue-G used for this GEM Port Network CTP in the downstream direction. It is used when the Traffic Manag… |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.4 | ColumnzxGponGemBasicPNCTPInfoUniCounter | read-only | current | This attribute represents the number of instances of UNI-G managed entity associated with an instance of the GEM Port Network CTP managed entity. If only one i… |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.5 | ColumnzxGponGemBasicIWTPInfoIwOption | read-only | current | It identifies the type of non-GEM function that is being interworked; the option can be CES (1) or MAC Bridge LAN (2) or 802.1p Mapper (6). |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.6 | ColumnzxGponGemBasicIWTPInfoServiceProPtr | read-write | current | It provides the service profile type and a pointer to the instance of a service profile, such as the CES Service ProfileB-PON (if the zxGponGemIwTPTempletIwOpt… |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.7 | ColumnzxGponGemBasicIWTPInfoPPTPCounter | read-only | current | This attribute represents the number of instances of PPTP managed entities associated with this instance of the GEM Interworking Termination Point managed enti… |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.8 | ColumnzxGponGemBasicIWTPInfoOpState | read-only | current | This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive … |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.9 | ColumnzxGponBasicGALTDMProfileInfoFrameLossIntPeriod | read-write | current | I.e GEM Frame Loss Integration Period, It represents the duration in milliseconds of the GEM frame loss integration period. If the GEM frame loss persists for … |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.10 | ColumnzxGponBasicGALEthProfileInfoMaxPayloadSize | read-write | current | I.e Maximum GEM Payload Size, it represents a maximum payload size that is generated in the associated GEM Interworking Termination Point managed entity. It is… |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.11 | ColumnzxGponGemBasicMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.30.5.1.12 | ColumnzxGponGemBasicEntryStatus | read-create | current | This attribute can be create,modify and delete. |
| 1.3.6.1.4.1.3902.1012.3.30.6 | TablezxGponGemPortMACBridgeIWTPTable | not-accessible | current | This table represents MAC Bridge lan Information. |
| 1.3.6.1.4.1.3902.1012.3.30.6.1 | RowzxGponGemPortMACBridgeIWTPEntry | not-accessible | current | It is entry in the table zxGponGemPortMACBridgeTable. |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.1 | ColumnzxGponMACBriPortCfgDataIWTPMeIdIdx | read-only | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.2 | ColumnzxGponMACBriPortCfgDataIWTPPortNum | read-write | current | This attribute provides the port number. |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.3 | ColumnzxGponMACBriPortCfgDataIWTPTPType | read-only | current | This attribute identifies the type of the termination point associated with this MAC bridge port. The value is set to 0x01 if this bridge port is associated wi… |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.4 | ColumnzxGponMACBriPortCfgDataIWTPPortPriority | read-write | current | This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255). |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.5 | ColumnzxGponMACBriPortCfgDataIWTPPortPathCost | read-write | current | This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65 535). |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.6 | ColumnzxGponMACBriPortCfgDataIWTPPortSpanTreeInd | read-write | current | This Boolean attribute indicates whether or not STP is enabled at this port. The value TRUE means enabled. |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.7 | ColumnzxGponMACBriPortCfgDataIWTPEncapMethod | read-write | current | This attribute identifies the frame encapsulation method that is used. Value 0x00: identification by ATM VC; value 0x01: LLC encapsulation. Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.8 | ColumnzxGponMACBriPortCfgDataIWTPLANFCSInd | read-write | current | This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x01) or discarded (value 0x02) towards the OLT. Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.9 | ColumnzxGponMACBriPortCfgDataIWTPMgmtCtrlFlag | read-only | current | This attribute is used to indicate this record is created by NMS or NE. If it is neCreate(2), this record can not be deleted. |
| 1.3.6.1.4.1.3902.1012.3.30.6.1.10 | ColumnzxGponMACBriPortCfgDataIWTPEntryStatus | read-create | current | This attribute can be create,modify and delete. |
| 1.3.6.1.4.1.3902.1012.3.30.7 | TablezxGponGemPortMACBridgeUNITable | not-accessible | current | This table represents MAC Bridge lan Information. |
| 1.3.6.1.4.1.3902.1012.3.30.7.1 | RowzxGponGemPortMACBridgeUNIEntry | not-accessible | current | It is entry in the table zxGponGemPortMACBridgeUNITable. |
| 1.3.6.1.4.1.3902.1012.3.30.7.1.1 | ColumnzxGponMACBriPortCfgDataUNIMeIdIdx | read-only | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.30.7.1.2 | ColumnzxGponMACBriPortCfgDataUNIPortNum | read-write | current | This attribute provides the port number. |
| 1.3.6.1.4.1.3902.1012.3.30.7.1.3 | ColumnzxGponMACBriPortCfgDataUNITPType | read-only | current | This attribute identifies the type of the termination point associated with this MAC bridge port. The value is set to 0x01 if this bridge port is associated wi… |
| 1.3.6.1.4.1.3902.1012.3.30.7.1.4 | ColumnzxGponMACBriPortCfgDataUNIPortPriority | read-write | current | This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255). |
| 1.3.6.1.4.1.3902.1012.3.30.7.1.5 | ColumnzxGponMACBriPortCfgDataUNIPortPathCost | read-write | current | This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65 535). |
| 1.3.6.1.4.1.3902.1012.3.30.7.1.6 | ColumnzxGponMACBriPortCfgDataUNIPortSpanTreeInd | read-write | current | This Boolean attribute indicates whether or not STP is enabled at this port. The value TRUE means enabled. |
| 1.3.6.1.4.1.3902.1012.3.30.7.1.7 | ColumnzxGponMACBriPortCfgDataUNIEncapMethod | read-write | current | This attribute identifies the frame encapsulation method that is used. Value 0x00: identification by ATM VC; value 0x01: LLC encapsulation. Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.30.7.1.8 | ColumnzxGponMACBriPortCfgDataUNILANFCSInd | read-write | current | This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded (value 0x01) or discarded (value 0x02) towards the OLT. Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.30.8 | TablezxGponGemPort8021pTable | not-accessible | current | This table represents 802.1p priority mapper Information. |
| 1.3.6.1.4.1.3902.1012.3.30.8.1 | RowzxGponGemPort8021pEntry | not-accessible | current | It is entry in the table zxGponGemPort8021pTable. |
| 1.3.6.1.4.1.3902.1012.3.30.8.1.1 | ColumnzxGponGemPort8021pMapperUntagFrmInd | read-write | current | This attribute indicates how the ONT should handle Untagged Ethernet frames received across the associated Ethernet interface. Valid values include the followi… |
| 1.3.6.1.4.1.3902.1012.3.30.8.1.2 | ColumnzxGponGemPort8021pMapperDscpTo8021pPri | read-write | current | This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 1('zxGpon8021pMapperUntagFrmInd' is dscpTo8021p), t… |
| 1.3.6.1.4.1.3902.1012.3.30.8.1.3 | ColumnzxGponGemPort8021pMapperDefaultPri | read-write | current | This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 2('zxGpon8021pMapperUntagFrmInd' is tagFrmToVal), t… |
| 1.3.6.1.4.1.3902.1012.3.30.8.1.4 | ColumnzxGponGemPort8021pMapperTPType | read-only | current | This attribute identifies the type of termination point associated with the mapper. The value is set to 0x01 if the mapper is used for Bridging-mapping. The va… |
| 1.3.6.1.4.1.3902.1012.3.30.9 | TablezxGponGemPortStructuredCESTable | not-accessible | current | This table represents Logical N X 64 kbit/s sub-port CTP Information. |
| 1.3.6.1.4.1.3902.1012.3.30.9.1 | RowzxGponGemPortStructuredCESEntry | not-accessible | current | It is entry in the table zxGponGemPortCESTable. |
| 1.3.6.1.4.1.3902.1012.3.30.9.1.1 | ColumnzxGponLogicalSubportCTPMeIdIdx | read-only | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.30.9.1.2 | ColumnzxGponLogicalSubportCTPTimeSlots | read-only | current | This attribute provides a bitmap, which indicates the time slots. Each bit indicates whether the corresponding time slot is included in the connection or not. … |
| 1.3.6.1.4.1.3902.1012.3.30.10 | TablezxGponGemPortIpRouterIWTPTable | not-accessible | current | This table represents IP router Information. |
| 1.3.6.1.4.1.3902.1012.3.30.10.1 | RowzxGponGemPortIpRouterIWTPEntry | not-accessible | current | It is entry in the table zxGponGemPortIpRouterIWTPTable. |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.1 | ColumnzxGponGemPortIpPortCfgDataIWTPMeIdIdx | read-only | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.2 | ColumnzxGponGemPortIpPortCfgDataIWTPPortNum | read-write | current | This attribute identifies the port at which IP provisioning takes place. |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.3 | ColumnzxGponGemPortIpPortCfgDataIWTPTPType | read-only | current | This attribute identifies the type of the termination point associated with this IP port. The value is set to 0x01 if this IP port is associated with the LAN s… |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.4 | ColumnzxGponGemPortIpPortCfgDataIWTPPortAddress | read-write | current | This attribute identifies the provisioned IP address. When an IP address is not assigned, this attribute consists of all 0x00. |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.5 | ColumnzxGponGemPortIpPortCfgDataIWTPPortMask | read-write | current | This attribute identifies the address mask associated with the provisioned IP address. When an IP address mask is not assigned, this attribute consists of all … |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.6 | ColumnzxGponGemPortIpPortCfgDataIWTPUnnumbered | read-write | current | This boolean attribute indicates whether or not this IP port has an IP address. The value TRUE means unnumbered. (For future use by IP router function.). |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.7 | ColumnzxGponGemPortIpPortCfgDataIWTPAdministrativeState | read-write | current | This boolean attribute is used to activate (unlock, value 0x00) and deactivate (lock, value 0x01) the functions performed by instances of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.8 | ColumnzxGponGemPortIpPortCfgDataIWTPPortState | read-only | current | This boolean attribute provides status information on the port. Valid values include 'up' (value 0x00) and 'down' (value 0x01). |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.9 | ColumnzxGponGemPortIpPortCfgDataIWTPAllowRemoteAccess | read-only | current | This boolean attribute indicates whether or not this IP port may be accessed remotely. The value TRUE means remote access is enabled. |
| 1.3.6.1.4.1.3902.1012.3.30.10.1.10 | ColumnzxGponGemPortIpPortCfgDataIWTPEncapsulationMethod | read-write | current | This attribute identifies the frame encapsulation method that is used. Value 0x00: identification by ATM VC; value 0x01: LLC encapsulation. Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.30.11 | TablezxGponGemPortIpRouterUNITable | not-accessible | current | This table represents IP router Information. |
| 1.3.6.1.4.1.3902.1012.3.30.11.1 | RowzxGponGemPortIpRouterUNIEntry | not-accessible | current | It is entry in the table zxGponGemPortIpRouterTable. |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.1 | ColumnzxGponGemPortIpPortCfgDataUNIMeIdIdx | read-only | current | This attribute provides a unique number for each instance of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.2 | ColumnzxGponGemPortIpPortCfgDataUNIPortNum | read-write | current | This attribute identifies the port at which IP provisioning takes place. |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.3 | ColumnzxGponGemPortIpPortCfgDataUNITPType | read-only | current | This attribute identifies the type of the termination point associated with this IP port. The value is set to 0x01 if this IP port is associated with the LAN s… |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.4 | ColumnzxGponGemPortIpPortCfgDataUNIPortAddress | read-write | current | This attribute identifies the provisioned IP address. When an IP address is not assigned, this attribute consists of all 0x00. |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.5 | ColumnzxGponGemPortIpPortCfgDataUNIPortMask | read-write | current | This attribute identifies the address mask associated with the provisioned IP address. When an IP address mask is not assigned, this attribute consists of all … |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.6 | ColumnzxGponGemPortIpPortCfgDataUNIUnnumbered | read-write | current | This boolean attribute indicates whether or not this IP port has an IP address. The value TRUE means unnumbered. (For future use by IP router function.). |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.7 | ColumnzxGponGemPortIpPortCfgDataUNIAdministrativeState | read-write | current | This boolean attribute is used to activate (unlock, value 0x00) and deactivate (lock, value 0x01) the functions performed by instances of this managed entity. |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.8 | ColumnzxGponGemPortIpPortCfgDataUNIPortState | read-only | current | This boolean attribute provides status information on the port. Valid values include 'up' (value 0x00) and 'down' (value 0x01). |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.9 | ColumnzxGponGemPortIpPortCfgDataUNIAllowRemoteAccess | read-only | current | This boolean attribute indicates whether or not this IP port may be accessed remotely. The value TRUE means remote access is enabled. |
| 1.3.6.1.4.1.3902.1012.3.30.11.1.10 | ColumnzxGponGemPortIpPortCfgDataUNIEncapsulationMethod | read-write | current | This attribute identifies the frame encapsulation method that is used. Value 0x00: identification by ATM VC; value 0x01: LLC encapsulation. Upon autonomous ins… |
| 1.3.6.1.4.1.3902.1012.3.30.12 | TablezxGponGemPortIWTPMACBriPortFilterTableInfoTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Instances of this managed entity s… |
| 1.3.6.1.4.1.3902.1012.3.30.12.1 | RowzxGponGemPortIWTPMACBriPortFilterTableInfoEntry | not-accessible | current | Alternative schemes for this managed entity may be included in future Recommendations. |
| 1.3.6.1.4.1.3902.1012.3.30.12.1.1 | ColumnzxGponGemPortIWTPMACBriPortFilterTableMacAddr | not-accessible | current | This attribute lists destination MAC Addresses associated with the bridge port. |
| 1.3.6.1.4.1.3902.1012.3.30.12.1.2 | ColumnzxGponGemPortIWTPMACBriPortFilterTableAction | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.30.12.1.3 | ColumnzxGponGemPortIWTPMACBriPortFilterTableEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.30.13 | TablezxGponGemPortUNIMACBriPortFilterTableInfoTable | not-accessible | current | This managed entity is used to organize and record data that is associated with a bridge port. Some of the data is volatile. Instances of this managed entity s… |
| 1.3.6.1.4.1.3902.1012.3.30.13.1 | RowzxGponGemPortUNIMACBriPortFilterTableInfoEntry | not-accessible | current | Alternative schemes for this managed entity may be included in future Recommendations. |
| 1.3.6.1.4.1.3902.1012.3.30.13.1.1 | ColumnzxGponGemPortUNIMACBriPortFilterTableMacAddr | not-accessible | current | This attribute lists destination MAC Addresses associated with the bridge port. |
| 1.3.6.1.4.1.3902.1012.3.30.13.1.2 | ColumnzxGponGemPortUNIMACBriPortFilterTableAction | read-write | current | |
| 1.3.6.1.4.1.3902.1012.3.30.13.1.3 | ColumnzxGponGemPortUNIMACBriPortFilterTableEntryStatus | read-create | current | |
| 1.3.6.1.4.1.3902.1012.3.30.14 | TablezxGponGemPortWeightTable | not-accessible | current | This table represents ONU side configuration. |
| 1.3.6.1.4.1.3902.1012.3.30.14.1 | RowzxGponGemPortWeightEntry | not-accessible | current | It is entry in the table zxGponGemPortWeightTable. |
| 1.3.6.1.4.1.3902.1012.3.30.14.1.1 | ColumnzxGponGemPortSchedulemode | read-write | current | COS Schedule mode. |
| 1.3.6.1.4.1.3902.1012.3.30.14.1.2 | ColumnzxGponGemPortCos1Weight | read-write | current | Weight of COS1(0-100). |
| 1.3.6.1.4.1.3902.1012.3.30.14.1.3 | ColumnzxGponGemPortCos2Weight | read-write | current | Weight of COS2(0-100). |
| 1.3.6.1.4.1.3902.1012.3.30.14.1.4 | ColumnzxGponGemPortCos3Weight | read-write | current | Weight of COS3(0-100). |
| 1.3.6.1.4.1.3902.1012.3.30.14.1.5 | ColumnzxGponGemPortCos4Weight | read-write | current | Weight of COS4(0-100). |
| 1.3.6.1.4.1.3902.1012.3.30.20 | TablezxGponGemPortPrioReGenTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.30.20.1 | RowzxGponGemPortPrioReGenEntry | not-accessible | current | It is entry in the table zxGponGemPortPrioReGenTable. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.1 | ColumnzxGponGemPortPrioReGenMode | read-write | current | This attribute specifies the priority-regeneration mode of GEM port. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.2 | ColumnzxGponGemPortPrioReGenMap0 | read-write | current | This attribute specifies the regenerated priority of priority 0. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.3 | ColumnzxGponGemPortPrioReGenMap1 | read-write | current | This attribute specifies the regenerated priority of priority 1. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.4 | ColumnzxGponGemPortPrioReGenMap2 | read-write | current | This attribute specifies the regenerated priority of priority 2. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.5 | ColumnzxGponGemPortPrioReGenMap3 | read-write | current | This attribute specifies the regenerated priority of priority 3. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.6 | ColumnzxGponGemPortPrioReGenMap4 | read-write | current | This attribute specifies the regenerated priority of priority 4. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.7 | ColumnzxGponGemPortPrioReGenMap5 | read-write | current | This attribute specifies the regenerated priority of priority 5. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.8 | ColumnzxGponGemPortPrioReGenMap6 | read-write | current | This attribute specifies the regenerated priority of priority 6. |
| 1.3.6.1.4.1.3902.1012.3.30.20.1.9 | ColumnzxGponGemPortPrioReGenMap7 | read-write | current | This attribute specifies the regenerated priority of priority 7. |
| 1.3.6.1.4.1.3902.1012.3.30.21 | TablezxGponGemPortStaticsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1 | RowzxGponGemPortStaticsEntry | not-accessible | current | It is entry in the table zxGponGemPortStaticsTable. |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.1 | ColumnzxGponGemPortUpUcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.2 | ColumnzxGponGemPortUpMcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.3 | ColumnzxGponGemPortUpBcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.4 | ColumnzxGponGemPortUpPassedBytes | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.5 | ColumnzxGponGemPortUpDroppedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.6 | ColumnzxGponGemPortDownUcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.7 | ColumnzxGponGemPortDownMcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.8 | ColumnzxGponGemPortDownBcastPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.9 | ColumnzxGponGemPortDownPassedBytes | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.21.1.10 | ColumnzxGponGemPortDownDroppedPkts | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22 | TablezxGponGemPortStaticsHistoryInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1 | RowzxGponGemPortStaticsHistoryInfoEntry | not-accessible | current | It is entry in the table zxGponGemPortStaticsHistoryInfoTable. |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.1 | ColumnzxGponGemPortUpUcastPktsHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.2 | ColumnzxGponGemPortUpMcastPktsHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.3 | ColumnzxGponGemPortUpBcastPktsHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.4 | ColumnzxGponGemPortUpPassedBytesHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.5 | ColumnzxGponGemPortUpDroppedPktsHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.6 | ColumnzxGponGemPortDownUcastPktsHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.7 | ColumnzxGponGemPortDownMcastPktsHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.8 | ColumnzxGponGemPortDownBcastPktsHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.9 | ColumnzxGponGemPortDownPassedBytesHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.30.22.1.10 | ColumnzxGponGemPortDownDroppedPktsHistoryInfo | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.40 | NodezxGponMacSpoofingObjects | |||
| 1.3.6.1.4.1.3902.1012.3.40.1 | ScalarzxGponSpoofingPort | read-only | current | The Gem Port. |
| 1.3.6.1.4.1.3902.1012.3.40.2 | ScalarzxGponSpoofingMac | read-only | current | The MAC of packets,which spoofing. |
| 1.3.6.1.4.1.3902.1012.3.40.3 | ScalarzxGponSpoofingVlan | read-only | current | The port VLAN, which MAC Spoofing. |
| 1.3.6.1.4.1.3902.1012.3.40.4 | ScalarzxGponSpoofingConflictPort | read-only | current | The conflict gem port. |
| 1.3.6.1.4.1.3902.1012.3.45 | NodezxGponTraps | |||
| 1.3.6.1.4.1.3902.1012.3.45.1 | NodezxGponTrapsBindVar | |||
| 1.3.6.1.4.1.3902.1012.3.45.1.1 | ScalarzxGponOltRxPowerAlarmiReason | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.45.1.2 | ScalarzxGponOltRxPowerAbnormalInformiReason | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.45.1.3 | ScalarzxGponOltTxPowerAlarmReason | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.45.1.4 | ScalarzxGponOltTxPowerAbnormalInformReason | read-only | current | |
| 1.3.6.1.4.1.3902.1012.3.45.1.5 | ScalarzxGponTrapEventString | read-only | current | Gpon trap event string. |
| 1.3.6.1.4.1.3902.1012.3.45.101 | NotificationzxGponOltLOSi | current | LOSi is Loss of signal for ONUi. Generate notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.102 | NotificationzxGponOltLosiRestore | current | LOSi is Loss of signal for ONUi.When the OLT receives a valid optical signal from ONUi, Alarm is restored | |
| 1.3.6.1.4.1.3902.1012.3.45.103 | NotificationzxGponOltLOFi | current | LOFi is Loss of Frame of ONUi. Send 3 times Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.104 | NotificationzxGponOltLOFiRestore | current | LOFi is Loss of Frame of ONUi. When frame delineation for ONUi is achieved in the operating state. | |
| 1.3.6.1.4.1.3902.1012.3.45.105 | NotificationzxGponOltDOWi | current | DOWi is Drift of Window of ONUi. Send modified EqD to the ONUi. | |
| 1.3.6.1.4.1.3902.1012.3.45.106 | NotificationzxGponOltDOWiRestore | current | DOWi is Drift of Window of ONUi. When the OLT receives the ONUi Transmission in the correct position. | |
| 1.3.6.1.4.1.3902.1012.3.45.107 | NotificationzxGponOltSFi | current | SFi is Signal Fail of ONUi. Send 3 times Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.108 | NotificationzxGponOltSFiRestore | current | SFi is Signal Fail of ONUi.When the upstream BER of ONUi becomes <10?y+1, this state is cleared. | |
| 1.3.6.1.4.1.3902.1012.3.45.109 | NotificationzxGponOltSDi | current | SDi is Signal Degraded of ONUi. | |
| 1.3.6.1.4.1.3902.1012.3.45.110 | NotificationzxGponOltSDiRestore | current | SDi is Signal Degraded of ONUi. When the upstream BER of ONUi becomes <10?X+1, this state is cleared. | |
| 1.3.6.1.4.1.3902.1012.3.45.111 | NotificationzxGponOltLCDAi | current | LCDAi is Loss of ATM channel delineation. Send 3 times Deactivate_ONU-ID messages Generate Loss_of_phy_layer_I notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.112 | NotificationzxGponOltLCDAiRestore | current | LCDAi is Loss of ATM channel delineation. When cell delineation for ONUi is achieved. | |
| 1.3.6.1.4.1.3902.1012.3.45.113 | NotificationzxGponOltLCDGi | current | LCDGi is Loss of GEM channel delineation. Send 3 times Deactivate_ONU-ID messages Generate Loss_of_phy_layer_I notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.114 | NotificationzxGponOltLCDGiRestore | current | LCDGi is Loss of GEM channel delineation. When GEM channel delineation for ONUi is achieved. | |
| 1.3.6.1.4.1.3902.1012.3.45.115 | NotificationzxGponOltRDIi | current | RDIi is Remote Defect Indication of ONUi. | |
| 1.3.6.1.4.1.3902.1012.3.45.116 | NotificationzxGponOltRDIiRestore | current | RDIi is Remote Defect Indication of ONUi. When the RDI field of ONUi is de-asserted. | |
| 1.3.6.1.4.1.3902.1012.3.45.117 | NotificationzxGponOltSUFi | current | SUFi is Start-up Failure of ONUi. Send 3 times Deactivate_ONU-ID messages. | |
| 1.3.6.1.4.1.3902.1012.3.45.118 | NotificationzxGponOltSUFiRestore | current | SUFi is Start-up Failure of ONUi. The ONU is ranged successfully. | |
| 1.3.6.1.4.1.3902.1012.3.45.119 | NotificationzxGponOltDFi | current | DFi is Deactivate Failure of ONUi. | |
| 1.3.6.1.4.1.3902.1012.3.45.120 | NotificationzxGponOltDFiRestore | current | DFi is Deactivate Failure of ONUi. Cancelled by the operator. | |
| 1.3.6.1.4.1.3902.1012.3.45.121 | NotificationzxGponOltLOAi | current | LOAi is Loss of Acknowledge with ONUi. Send 3 times Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.122 | NotificationzxGponOltLOAiRestore | current | LOAi is Loss of Acknowledge with ONUi. When the OLT receives an acknowledgement from the ONU. | |
| 1.3.6.1.4.1.3902.1012.3.45.123 | NotificationzxGponOltDGi | current | DGi is Receive Dying-Gasp of ONUi. Ignore received alarms from this ONU. Generate Loss_of_phy_layer_I notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.124 | NotificationzxGponOltDGiRestore | current | DGi is Receive Dying-Gasp of ONUi. When the OLT receives a PLOAM message during ranging process. | |
| 1.3.6.1.4.1.3902.1012.3.45.125 | NotificationzxGponOltLOAMi | current | LOAMi is Loss of PLOAM for ONUi. Send 3 times Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.126 | NotificationzxGponOltLOAMiRestore | current | LOAMi is Loss of PLOAM for ONUi. When the OLT receives a PLOAM message corresponding to its PLOAM flag in the Operating state. | |
| 1.3.6.1.4.1.3902.1012.3.45.127 | NotificationzxGponOltMEMi | current | MEMi is Message_Error Message from ONUi. | |
| 1.3.6.1.4.1.3902.1012.3.45.128 | NotificationzxGponOltMEMiRestore | current | MEMi is Message_Error Message from ONUi. When the operator is informed. | |
| 1.3.6.1.4.1.3902.1012.3.45.129 | NotificationzxGponOltMISi | current | Misi is Link Mismatch of ONUi. | |
| 1.3.6.1.4.1.3902.1012.3.45.130 | NotificationzxGponOltMISiRestore | current | MISi is Link Mismatch of ONUi. The OLT detects that received PSTi and the transmitted PST are the same. | |
| 1.3.6.1.4.1.3902.1012.3.45.131 | NotificationzxGponOltPEEi | current | PEEi is Physical Equipment Error of ONUi. Generate Loss_of_physical_layer_I notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.132 | NotificationzxGponOltPEEiRestore | current | PEEi is Physical Equipment Error of ONUi. When the OLT doesn't receive a PEE message from the ONUi in 3 s. | |
| 1.3.6.1.4.1.3902.1012.3.45.133 | NotificationzxGponOntLOS | current | LOS is Loss Of Signal. Switch off laser. Generate Loss_of_phy_layer notification. Move to Initial- State. | |
| 1.3.6.1.4.1.3902.1012.3.45.134 | NotificationzxGponOntLOSRestore | current | LOS is Loss Of Signal. Valid optical signal. | |
| 1.3.6.1.4.1.3902.1012.3.45.135 | NotificationzxGponOntLOF | current | LOF is Loss of Frame. Switch off laser. Generate Loss_of_phy_layer notification. Move to Initial- State. | |
| 1.3.6.1.4.1.3902.1012.3.45.136 | NotificationzxGponOntLOFRestore | current | LOF is Loss of Frame. When 2 consecutive frames have correct PSYNC. | |
| 1.3.6.1.4.1.3902.1012.3.45.137 | NotificationzxGponOntTF | current | TF is Transmitter Failure. | |
| 1.3.6.1.4.1.3902.1012.3.45.138 | NotificationzxGponOntTFRestore | current | TF is Transmitter Failure. | |
| 1.3.6.1.4.1.3902.1012.3.45.139 | NotificationzxGponOntSF | current | SF is Signal Failed. | |
| 1.3.6.1.4.1.3902.1012.3.45.140 | NotificationzxGponOntSFRestore | current | SF is Signal Failed. Set inactive when the downstream BER is <10?(y+1). | |
| 1.3.6.1.4.1.3902.1012.3.45.141 | NotificationzxGponOntSD | current | SD is Signal Degraded. | |
| 1.3.6.1.4.1.3902.1012.3.45.142 | NotificationzxGponOntSDRestore | current | SD is Signal Degraded. Set inactive when the downstream BER is <10?(x+1). | |
| 1.3.6.1.4.1.3902.1012.3.45.143 | NotificationzxGponOntLCDA | current | LCDA is Loss of ATM channel delineation. Switch off laser. Generate Loss_of_phy_layer notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.144 | NotificationzxGponOntLCDARestore | current | LCDA is Loss of ATM channel delineation. When cell delineation is achieved. | |
| 1.3.6.1.4.1.3902.1012.3.45.145 | NotificationzxGponOntLCDG | current | LCDG is Loss of GEM channel delineation. Switch off laser. Generate Loss_of_phy_layer notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.146 | NotificationzxGponOntLCDGRestore | current | LCDG is Loss of GEM channel delineation. When GEM delineation is achieved. | |
| 1.3.6.1.4.1.3902.1012.3.45.147 | NotificationzxGponOntRDI | current | RDI is Remote Defect Indication in ONU. Set RDI status bit in PLOu. | |
| 1.3.6.1.4.1.3902.1012.3.45.148 | NotificationzxGponOntRDIRestore | current | RDI is Remote Defect Indication in ONU. When the OLT transmission defect is resolved. | |
| 1.3.6.1.4.1.3902.1012.3.45.149 | NotificationzxGponOntSUF | current | SUF is Start-up Failure. | |
| 1.3.6.1.4.1.3902.1012.3.45.150 | NotificationzxGponOntSUFRestore | current | SUF is Start-up Failure. When ranging is successful. | |
| 1.3.6.1.4.1.3902.1012.3.45.151 | NotificationzxGponOntMEM | current | MEM is Message Error Message. | |
| 1.3.6.1.4.1.3902.1012.3.45.152 | NotificationzxGponOntMEMRestore | current | MEM is Message Error Message. | |
| 1.3.6.1.4.1.3902.1012.3.45.153 | NotificationzxGponOntDACT | current | DACT is Deactivate ONU-ID. Switch off the laser and go to Standby-State. Generate Loss_of_phy_layer notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.154 | NotificationzxGponOntDACTRestore | current | DACT is Deactivate ONU-ID.Reception of Upstream_overhead message. | |
| 1.3.6.1.4.1.3902.1012.3.45.155 | NotificationzxGponOntDIS | current | DIS is Disabled ONU. Switch off laser. Go to Emergency-Stop State Generate Loss_of_phy_layer notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.156 | NotificationzxGponOntDISRestore | current | DIS is Disabled ONU. When the ONU receives a Disable_Serial_Number message with Enable flag=0x0F or when it receives a Disable_Serial_Number message with it's … | |
| 1.3.6.1.4.1.3902.1012.3.45.157 | NotificationzxGponOntMIS | current | MIS is Link Mismatching. | |
| 1.3.6.1.4.1.3902.1012.3.45.158 | NotificationzxGponOntMISRestore | current | MIS is Link Mismatching. The ONU detects that the received PST and transmitted PST are the same. | |
| 1.3.6.1.4.1.3902.1012.3.45.159 | NotificationzxGponOntPee | current | Pee is Physical Equipment Error. Generate Loss_of_physical_layer notification. | |
| 1.3.6.1.4.1.3902.1012.3.45.160 | NotificationzxGponOntPeeRestore | current | Pee is Physical Equipment Error. When the ONU doesn't receive a PEE message in 3 s. | |
| 1.3.6.1.4.1.3902.1012.3.45.161 | NotificationzxGponOltLOS | current | LOS is Loss Of Signal. Switch off laser. Generate Loss_of_phy_layer notification. Move to Initial- State. | |
| 1.3.6.1.4.1.3902.1012.3.45.162 | NotificationzxGponOltLOSRestore | current | LOS is Loss Of Signal. Valid optical signal. | |
| 1.3.6.1.4.1.3902.1012.3.45.163 | NotificationzxGponOltLOF | current | LOF is Loss of Frame. Switch off laser. Generate Loss_of_phy_layer notification. Move to Initial- State. | |
| 1.3.6.1.4.1.3902.1012.3.45.164 | NotificationzxGponOltLOFRestore | current | LOF is Loss of Frame. When 2 consecutive frames | |
| 1.3.6.1.4.1.3902.1012.3.45.165 | NotificationzxGponOntRegister | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.166 | NotificationzxGponOntUnregister | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.167 | NotificationzxGponOntAuthPass | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.168 | NotificationzxGponOntAuthFailed | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.171 | NotificationzxPonFanOffLine | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.172 | NotificationzxPonFanOffLineRestore | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.173 | NotificationzxGponLinkOntDyingGasp | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.174 | NotificationzxGponLinkOntDyingGaspRestore | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.175 | NotificationzxGponOltRxPowerAlarmi | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.176 | NotificationzxGponOltRxPowerAlarmiRestore | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.177 | NotificationzxGponOltRxPowerAbnormalInformi | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.178 | NotificationzxGponOltRxPowerNormalInformi | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.179 | NotificationzxGponOltTxPowerAlarm | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.180 | NotificationzxGponOltTxPowerAlarmRestore | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.181 | NotificationzxGponOltTxPowerAbnormalInform | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.182 | NotificationzxGponOltTxPowerNormalInform | current | ||
| 1.3.6.1.4.1.3902.1012.3.45.183 | NotificationzxGponOltFakedSN | current | OLT detects a faked SN event. | |
| 1.3.6.1.4.1.3902.1012.3.45.184 | NotificationzxGponOnuConstantOptical | current | It indicate ONU constant optical. | |
| 1.3.6.1.4.1.3902.1012.3.45.185 | NotificationzxGponOnuConstantOpticalRestore | current | It indicate ONU constant optical restore. | |
| 1.3.6.1.4.1.3902.1012.3.45.186 | NotificationzxGponOnuFiberBending | current | It indicate ONU constant optical. | |
| 1.3.6.1.4.1.3902.1012.3.45.187 | NotificationzxGponOnuFiberBendingRestore | current | It indicate ONU constant optical restore. | |
| 1.3.6.1.4.1.3902.1012.3.45.188 | NotificationzxGponOnuOpticalTransceiverLos | current | It indicate ONU constant optical. | |
| 1.3.6.1.4.1.3902.1012.3.45.189 | NotificationzxGponOnuOpticalTransceiverLosRestore | current | It indicate ONU constant optical restore. | |
| 1.3.6.1.4.1.3902.1012.3.45.190 | NotificationzxGponMacSpoofing | current | It indicate Gpon port mac spoolfing. | |
| 1.3.6.1.4.1.3902.1012.3.45.191 | NotificationzxGponUnauthOnuOnline | current | It indicate ONU constant optical. | |
| 1.3.6.1.4.1.3902.1012.3.45.192 | NotificationzxGponOltTF | current | TF is Transmitter Failure. | |
| 1.3.6.1.4.1.3902.1012.3.45.193 | NotificationzxGponOltTFRestore | current | TF is Transmitter Failure. | |
| 1.3.6.1.4.1.3902.1012.3.45.194 | NotificationzxGponOltFakedPassword | current | OLT detects a faked passwrod event. | |
| 1.3.6.1.4.1.3902.1012.3.100 | NodezxGponTermination | |||
| 1.3.6.1.4.1.3902.1012.3.100.1 | ScalarzxGponTerminationDummy | read-only | current | The dummy object indicats the termination of all gpon mibs. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OntEquipmentId | OCTET STRING (SIZE (20)) | current | Represents the specific type of ONT. |
| OntSerialNumber | OCTET STRING (SIZE (8)) | current | Represents the unique for each ONT. |
| OntVendorId | OCTET STRING (SIZE (4)) | current | Represents the vendor of the ONT. |
| OntVersionId | OCTET STRING (SIZE (14)) | current | Represents the version of the ONT. |
| Timeout | INTEGER | ||
| VlanId | INTEGER (1..4094) | current | A 12-bit VLAN ID used in the VLAN Tag header. |
| ZxGponRecordName | OCTET STRING (SIZE (0..64)) | current | Represents the specific type of templet. |
| ZxIndexList | OCTET STRING(SIZE (0..256)) | current | Each four octets indicates one table index number, with from the first octet to fourth octect specifying first index Number, from the fifth octet to eighth octet specifying second index Number, etc. example, index 1, in… |
| ZxOntList | OCTET STRING(SIZE (0..256)) | current | The first octet indicates one PON OLT ID number, and Each four octets indicates one ONT/ONU ID number that thses ONTs belong to the PON OLT, with from the second octet to fifth octect specifying first ONT/ONU, from the … |
| ZxPortIdList | OCTET STRING(SIZE (0..256)) | current | The first octet indicates one PON OLT ID number, and Each four octets indicates one PortId number that thses PortIds belong to the PON OLT, with from the second octet to fifth octect specifying first PortId Number, from… |