ZXPW-STD-MIB
50 objects
This MIB module contains managed object definitions for Pseudo Wire operation as in [RFC3985][RFC3931][PWCNTRL]. architecture', Martini, L., et al, 'Pseudowire Setup and Maintenance using LDP', and Townsley, M., et al, 'Layer Two Tunneling Protocol (Version 3)'. This MIB module enables the use of any underlying packet switched network (PSN). MIB nodules that will support PW operations over specific PSN types are defined in separate memos. The indexes for this MIB module are also used to index the PSN-specific tables and the PW-specific tables. The PW Type dictates which PW-specific MIB module to use.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1013.1 | IdentityzxPwStdMIB | This MIB module contains managed object definitions for Pseudo Wire operation as in [RFC3985][RFC3931][PWCNTRL]. architecture', Martini, L., et al, 'Pseudowire… | ||
| 1.3.6.1.4.1.3902.1015.1013.1.1 | NodezxPwObjects | |||
| 1.3.6.1.4.1.3902.1015.1013.1.1.1 | ScalarzxPwIndexNext | read-only | current | This object contains an appropriate value to be used for zxPwIndex when creating entries in the zxPwTable. The value 0 indicates that no unassigned entries are… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2 | TablezxPwTable | not-accessible | current | This table specifies information for configuring and status monitoring which are common to all service types and PSN types. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1 | RowzxPwEntry | not-accessible | current | A row in this table represents a pseudo wire (PW) virtual connection across a packet network. It is indexed by zxPwIndex, which uniquely identifying a singular… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.1 | ColumnzxPwIndex | not-accessible | current | Index for the conceptual row identifying a PW within this PW Emulation table. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.2 | ColumnzxPwType | read-create | current | This value indicate the service to be carried over this PW. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.3 | ColumnzxPwOwner | read-create | current | Set by the operator to indicate the protocol responsible for establishing this PW. 'manual' is used in all cases where no maintenance protocol (PW signaling) i… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.4 | ColumnzxPwPsnType | read-create | current | Set by the operator to indicate the PSN type. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.5 | ColumnzxPwSetUpPriority | read-create | current | This object defines the relative set-up priority of the PW in a lowest-to-highest fashion, where 0 is the highest priority. PWs with the same priority are trea… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.6 | ColumnzxPwHoldingPriority | read-create | current | This object defines the relative holding priority of the PW in a lowest-to-highest fashion, where 0 is the highest priority. PWs with the same priority are tre… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.8 | ColumnzxPwPeerAddrType | read-create | current | Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.9 | ColumnzxPwPeerAddr | read-create | current | This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not appli… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.10 | ColumnzxPwAttachedPwIndex | read-create | current | If the PW is attached to another PW instead of a local native service, this item indicates the zxPwIndex of the attached PW, and the PW specific entry in the s… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.11 | ColumnzxPwIfIndex | read-create | current | If the PW is represented in the ifTable as an ifIndex, this item holds the ifIndex of the PW in the ifTable, otherwise it MUST be set to zero. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.12 | ColumnzxPwID | read-create | current | Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. Applicable if zxPwOwner equal 'zxPwIdFecSignaling' or 'l2tpControlProtocol', should … |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.13 | ColumnzxPwLocalGroupID | read-create | current | Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if zxPwOwner equal 'zxPwIdFecSignaling' or 'l2tp… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.14 | ColumnzxPwGroupAttachmentID | read-create | current | This object is an octet string representing the attachment group identifier (AGI) this PW belongs too, which typically identifies the VPN ID. Applicable if zxP… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.15 | ColumnzxPwLocalAttachmentID | read-create | current | This object is an octet string representing the local forwarder attachment individual identifier (AII) to be used by this PW. It is used as the SAII for outgoi… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.16 | ColumnzxPwPeerAttachmentID | read-create | current | This object is an octet string representing the peer forwarder attachment individual identifier (AII) to be used by this PW. It is used as the TAII for outgoin… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.17 | ColumnzxPwCwPreference | read-create | current | Defines if the control word will be sent with each packet by the local node. Some PW types mandate the use of control word, and is such cases the value configu… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.18 | ColumnzxPwLocalIfMtu | read-create | current | If not equal zero, the optional IfMtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the inter… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.19 | ColumnzxPwLocalIfString | read-create | current | A PW MAY be associated to an interface (or a virtual interface) in the ifTable of the node as part of the service configuration. This object defines if the mai… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.20 | ColumnzxPwLocalCapabAdvert | read-create | current | Indicates the capabilities to be advertised by this node to the peer. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.21 | ColumnzxPwRemoteGroupID | read-only | current | Obtained from the Group ID field as received via the maintenance protocol used for PW setup, zero if not used. Value of 0xFFFF shall be used if the object is y… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.22 | ColumnzxPwCwStatus | read-only | current | If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indi… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.23 | ColumnzxPwRemoteIfMtu | read-only | current | The remote interface MTU as (optionally) received from the remote node via the maintenance protocol. Should be zero if this parameter is not available or not u… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.24 | ColumnzxPwRemoteIfString | read-only | current | Indicates the interface description string as received by the maintenance protocol, MUST be NULL string if not applicable or not known yet. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.25 | ColumnzxPwRemoteCapabilities | read-only | current | Indicates the capabilities as advertised by the peer. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.26 | ColumnzxPwFragmentCfgSize | read-create | current | If set to value other than zero, indicates that fragmentation is desired for this PW. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.27 | ColumnzxPwRmtFragCapability | read-only | current | The status of the fragmentation based on the local configuration and the peer capabilities as advertised by the peer if control protocol is used. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.28 | ColumnzxPwFcsRetentioncfg | read-create | current | The local configuration of FCS retention for this PW. FCS retention can be configured for PW types HDLC, PPP and Ethernet only. If the agent does not support F… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.29 | ColumnzxPwFcsRetentionStatus | read-only | current | The status of the FCS retention negotiation process based on local configuration and the remote advertisement. remoteIndicationUnknown - set if a FEC has not b… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.30 | ColumnzxPwOutboundLabel | read-create | current | The PW label used in the outbound direction (i.e. toward the PSN). It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPL… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.31 | ColumnzxPwInboundLabel | read-create | current | The PW label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherwise. Exam… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.32 | ColumnzxPwName | read-create | current | The canonical name assigned to the PW. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.33 | ColumnzxPwDescr | read-create | current | A textual string containing information about the PW. If there is no description this object contains a zero length string. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.34 | ColumnzxPwCreateTime | read-only | current | System time when this PW was created. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.35 | ColumnzxPwUpTime | read-only | current | Specifies the total time this PW operStatus has been Up(1). |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.36 | ColumnzxPwLastChange | read-only | current | The value of sysUpTime at the time the PW entered its current operational state. If the current state was entered prior to the last re-initialization of the lo… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.37 | ColumnzxPwAdminStatus | read-create | current | The desired operational status of this PW. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.38 | ColumnzxPwOperStatus | read-only | current | This object indicates the operational status of the PW, it does not reflect the status of the CE bound interface. It is set to down only if pwNotForwarding, ps… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.39 | ColumnzxPwLocalStatus | read-only | current | Indicates the status of the PW in the local node. The various indications in this object should be available independent of the ability of the local node to ad… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.40 | ColumnzxPwRemoteStatusCapable | read-only | current | Indicates the remote node capability to advertise the PW status notification. notAppicable should be reported for manually set PW, or if the local node is not … |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.41 | ColumnzxPwRemoteStatus | read-only | current | Indicates the status of the PW as was advertised by the remote. If the remote is not capable of advertising the status object, or the local node is not able to… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.42 | ColumnzxPwTimeElapsed | read-only | current | The number of seconds, including partial seconds, that have elapsed since the beginning of the current interval measurement period. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.43 | ColumnzxPwValidIntervals | read-only | current | The number of previous 15-minute intervals for which data was collected. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.44 | ColumnzxPwRowStatus | read-create | current | For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) stat… |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.45 | ColumnzxPwStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.4.1.3902.1015.1013.1.1.2.1.46 | ColumnzxPwPeerTos | read-create | current |