ZXR10-ACL-NEW-MIB
358 objects
The MIB module to describe the ACL protocol.
Imported Objects
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| ZXR10-SMI | zxr10 zxr10RosngMIB |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.602 | Identityzxr10AclNewMIB | of | The MIB module to describe the ACL protocol. | |
| 1.3.6.1.4.1.3902.3.6000.602.1 | Nodezxr10ACLGlobalObjects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2 | Nodezxr10ACLObjects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.1 | Nodezxr10ACLv4Objects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.1.1 | Tablezxr10ACLv4ListTable | not-accessible | current | IPv4 ACL Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.1.1 | Rowzxr10ACLv4ListEntry | not-accessible | current | IPv4 ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.1.1.1 | Columnzxr10ACLv4ListName | read-only | current | Name of an IPv4 access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2 | Tablezxr10ACLv4RuleTable | not-accessible | current | IPv4 ACL Rule Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1 | Rowzxr10ACLv4RuleEntry | not-accessible | current | IPv4 ACL effective leaf nodes: A leaf node which is effective or not depends on the type of rule. Rule types include standard type,ip type,tcp type,udp type,ic… |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.1 | Columnzxr10ACLv4RuleAclName | not-accessible | current | Name of an IPv4 access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.2 | Columnzxr10ACLv4RuleRuleID | not-accessible | current | ID of this rule |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.3 | Columnzxr10ACLv4RulePermitDeny | read-only | current | deny : Specify packets to reject permit: Specify packets to forward |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.4 | Columnzxr10ACLv4RuleSrcAddr | read-only | current | A.B.C.D Source address |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.5 | Columnzxr10ACLv4RuleSrcWildcard | read-only | current | A.B.C.D Wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.6 | Columnzxr10ACLv4RuleDestAddr | read-only | current | A.B.C.D Destination address |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.7 | Columnzxr10ACLv4RuleDestWildcard | read-only | current | A.B.C.D Destination wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.8 | Columnzxr10ACLv4RuleIpProtocol | read-only | current | <0-255> An IP protocol number std standard rule type (65534) gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (1) igmp Internet Gr… |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.9 | Columnzxr10ACLv4RuleSrcPortOpr | read-only | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.10 | Columnzxr10ACLv4RuleSrcPortValue | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.11 | Columnzxr10ACLv4RuleSrcPortRange | read-only | current | Port range: <0-65535>-<0-65535> Check zxr10ACLv4RuleSrcPortRange only when the value of zxr10ACLv4RuleSrcPortOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.12 | Columnzxr10ACLv4RuleDestPortOpr | read-only | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.13 | Columnzxr10ACLv4RuleDestPortValue | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.14 | Columnzxr10ACLv4RuleDestPortRange | read-only | current | Port range: <0-65535>-<0-65535> Check zxr10ACLv4RuleDestPortRange only when the value of zxr10ACLv4RuleDestPortOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.15 | Columnzxr10ACLv4RuleTCPEstablish | read-only | current | Match established connections. This is an optional node. This node is conflict with zxr10ACLv4RuleAckFlag and zxr10ACLv4RuleRstFlag. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.16 | Columnzxr10ACLv4RuleICMPType | read-only | current | ICMP type: <0-255> valid value 65535 invalid value specific value: alternate-address Alternate address (6) echo Echo (ping, 8) echo-reply Echo reply (0) inform… |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.17 | Columnzxr10ACLv4RuleICMPCode | read-only | current | ICMP code: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.18 | Columnzxr10ACLv4RulePrecedence | read-only | current | Precedence level: <0-7> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.19 | Columnzxr10ACLv4RuleTOS | read-only | current | Type of service(ToS): <0-15> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.20 | Columnzxr10ACLv4RuleDSCP | read-only | current | DSCP value: <0-63> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.21 | Columnzxr10ACLv4RuleFragment | read-only | current | Fragment enable or disable flag. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.22 | Columnzxr10ACLv4RuleRstFlag | read-only | current | Match when the RST flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.23 | Columnzxr10ACLv4RuleAckFlag | read-only | current | Match when the ACK flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.24 | Columnzxr10ACLv4RuleFinFlag | read-only | current | Match when the FIN flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.25 | Columnzxr10ACLv4RuleSynFlag | read-only | current | Match when the SYN flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.26 | Columnzxr10ACLv4RulePshFlag | read-only | current | Match when the PSH flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.27 | Columnzxr10ACLv4RuleUrgFlag | read-only | current | Match when the URG flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.28 | Columnzxr10ACLv4RuleTtlOpr | read-only | current | This is an optional node. eq Match only packets on a given ttl value ge Match only packets with a no lower ttl value le Match only packets with a no greater tt… |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.29 | Columnzxr10ACLv4RuleTtlValue | read-only | current | The TTL value: <1-255> valid value 0 invalid value Check this node when the value of zxr10ACLv4RuleTtlOpr is eq(1), ge(2),le(3) or neq(6). |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.30 | Columnzxr10ACLv4RuleTtlRange | read-only | current | The TTL value Range: <1-255>-<1-255> valid value 0 invalid value Check this node when the value of zxr10ACLv4RuleTtlOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.31 | Columnzxr10ACLv4RuleTimerangeName | read-only | current | Time range name (1-31 characters). This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.32 | Columnzxr10ACLv4RuleSrcUrl | read-only | current | Source URL (1-95 characters) If source Url is configured, zxr10ACLv4RuleSrcAddr and zxr10ACLv4RuleSrcWildcard are invalid. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.33 | Columnzxr10ACLv4RuleDestUrl | read-only | current | Destination URL (1-95 characters) If Destination Url is configured, zxr10ACLv4RuleDestAddr and zxr10ACLv4RuleDestWildcard are invalid. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.34 | Columnzxr10ACLv4RuleDescription | read-only | current | Description for use (1-70 characters). |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.35 | Columnzxr10ACLv4RulePrecRange | read-only | current | Precedence range: <0-7>-<0-7> Invalid value: 65535. |
| 1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.36 | Columnzxr10ACLv4RuleDscpRange | read-only | current | DSCP range: <0-63>-<0-63> Invalid value: 65535. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2 | Nodezxr10ACLv6Objects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.2.1 | Tablezxr10ACLv6ListTable | not-accessible | current | IPv6 ACL Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.1.1 | Rowzxr10ACLv6ListEntry | not-accessible | current | IPv6 ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.1.1.1 | Columnzxr10ACLv6ListName | read-only | current | Name of an IPv6 access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2 | Tablezxr10ACLv6RuleTable | not-accessible | current | IPv6 ACL Rule Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1 | Rowzxr10ACLv6RuleEntry | not-accessible | current | IPv6 ACL effective leaf nodes: A leaf node which is effective or not depends on the type of rule. Rule types include ip type,tcp type,udp type,icmp type, repre… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.1 | Columnzxr10ACLv6RuleAclName | not-accessible | current | Name of an IPv6 access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.2 | Columnzxr10ACLv6RuleRuleID | not-accessible | current | ID of this rule |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.3 | Columnzxr10ACLv6RulePermitDeny | read-only | current | deny : Specify packets to reject permit: Specify packets to forward |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.4 | Columnzxr10ACLv6RuleFlowlabel | read-only | current | Flowlabel value: <0-1048575> valid value 2147483647 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.5 | Columnzxr10ACLv6RuleSrcAddr | read-only | current | <X:X::X:X> Source address |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.6 | Columnzxr10ACLv6RuleSrcWildcard | read-only | current | <0-128> Source Wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.7 | Columnzxr10ACLv6RuleDestAddr | read-only | current | <X:X::X:X> Destination address |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.8 | Columnzxr10ACLv6RuleDestWildcard | read-only | current | <0-128> Destination Wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.9 | Columnzxr10ACLv6RuleIpProtocol | read-only | current | <0-255> An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (58) igmp Internet Group Management Protocol (2) ip… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.10 | Columnzxr10ACLv6RuleSrcPortOpr | read-only | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.11 | Columnzxr10ACLv6RuleSrcPortValue | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.12 | Columnzxr10ACLv6RuleSrcPortRange | read-only | current | Port range: <0-65535>-<0-65535> Check zxr10ACLv6RuleSrcPortRange only when the value of zxr10ACLv6RuleSrcPortOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.13 | Columnzxr10ACLv6RuleDestPortOpr | read-only | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.14 | Columnzxr10ACLv6RuleDestPortValue | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.15 | Columnzxr10ACLv6RuleDestPortRange | read-only | current | Port range: <0-65535>-<0-65535> Check zxr10ACLv6RuleDestPortRange only when the value of zxr10ACLv6RuleDestPortOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.16 | Columnzxr10ACLv6RuleTCPEstablish | read-only | current | Match established connections. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.17 | Columnzxr10ACLv6RuleRstFlag | read-only | current | Match when the RST flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.18 | Columnzxr10ACLv6RuleAckFlag | read-only | current | Match when the ACK flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.19 | Columnzxr10ACLv6RuleFinFlag | read-only | current | Match when the FIN flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.20 | Columnzxr10ACLv6RuleSynFlag | read-only | current | Match when the SYN flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.21 | Columnzxr10ACLv6RulePshFlag | read-only | current | Match when the PSH flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.22 | Columnzxr10ACLv6RuleUrgFlag | read-only | current | Match when the URG flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.23 | Columnzxr10ACLv6RuleICMPType | read-only | current | ICMP type: <0-255> valid value 65535 invalid value specific value: destination-unreachable Destination unreachable (1) echo-reply Echo reply (129) echo-request… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.24 | Columnzxr10ACLv6RuleICMPCode | read-only | current | ICMP code: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.25 | Columnzxr10ACLv6RuleRouting | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.26 | Columnzxr10ACLv6RuleAuthen | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.27 | Columnzxr10ACLv6RuleDestops | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.28 | Columnzxr10ACLv6RuleFragments | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.29 | Columnzxr10ACLv6RuleHopByHop | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.30 | Columnzxr10ACLv6RuleEsp | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.31 | Columnzxr10ACLv6RuleDSCP | read-only | current | DSCP value: <0-63> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.32 | Columnzxr10ACLv6RuleTc | read-only | current | Traffic Class value: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.33 | Columnzxr10ACLv6RuleTimerangeName | read-only | current | Time range name (1-31 characters). This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.34 | Columnzxr10ACLv6RuleSrcUrl | read-only | current | Source URL (1-95 characters) If source Url is configured, zxr10ACLv6RuleSrcAddr and zxr10ACLv6RuleSrcWildcard are invalid. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.35 | Columnzxr10ACLv6RuleDestUrl | read-only | current | Destination URL (1-95 characters) If Destination Url is configured, zxr10ACLv6RuleDestAddr and zxr10ACLv6RuleDestWildcard are invalid. |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.36 | Columnzxr10ACLv6RuleSrcAddrMaskFlag | read-only | current | This flag indicates the way of configuring IPv6 source address mask, such as zxr10ACLv6RuleSrcWildcard, zxr10ACLv6RuleSrcWildcardBits. If this flag is valid, I… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.37 | Columnzxr10ACLv6RuleSrcWildcardBits | read-only | current | <X:X::X:X> Source address wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.38 | Columnzxr10ACLv6RuleDestAddrMaskFlag | read-only | current | This flag indicates the way of configuring IPv6 destination address mask,such as zxr10ACLv6RuleDestWildcard,zxr10ACLv6RuleDestWildcardBits. If this flag is val… |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.39 | Columnzxr10ACLv6RuleDestWildcardBits | read-only | current | <X:X::X:X> Destination address wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.40 | Columnzxr10ACLv6RuleDescription | read-only | current | Description for use (1-70 characters). |
| 1.3.6.1.4.1.3902.3.6000.602.2.3 | Nodezxr10ACLLinkObjects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.3.1 | Tablezxr10ACLLinkListTable | not-accessible | current | Link ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.1.1 | Rowzxr10ACLLinkListEntry | not-accessible | current | Link ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.1.1.1 | Columnzxr10ACLLinkListName | read-only | current | Name of a link access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2 | Tablezxr10ACLLinkRuleTable | not-accessible | current | Link ACL Rule Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1 | Rowzxr10ACLLinkRuleEntry | not-accessible | current | Link ACL effective leaf nodes: All of the leaf nodes are effective: zxr10ACLLinkRuleAclName, zxr10ACLLinkRuleRuleID, zxr10ACLLinkRulePermitDeny, zxr10ACLLinkRu… |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.1 | Columnzxr10ACLLinkRuleAclName | not-accessible | current | Name of a link access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.2 | Columnzxr10ACLLinkRuleRuleID | not-accessible | current | ID of this rule |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.3 | Columnzxr10ACLLinkRulePermitDeny | read-only | current | deny : Specify packets to reject permit: Specify packets to forward |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.4 | Columnzxr10ACLLinkRuleLinkProtocol | read-only | current | Link protocal: <1536-65535> valid value 65536 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.5 | Columnzxr10ACLLinkRuleSrcMAC | read-only | current | <xxxx.xxxx.xxxx> Source MAC address |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.6 | Columnzxr10ACLLinkRuleSrcMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Source MAC wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.7 | Columnzxr10ACLLinkRuleDestMAC | read-only | current | <xxxx.xxxx.xxxx> Destination MAC address |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.8 | Columnzxr10ACLLinkRuleDestMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Destination MAC wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.9 | Columnzxr10ACLLinkRuleIncos | read-only | current | Value of inner cos: <0-7> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.10 | Columnzxr10ACLLinkRuleOutCos | read-only | current | Value of outer cos: <0-7> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.11 | Columnzxr10ACLLinkRuleInVlanID | read-only | current | Value of inner vlan <1-4094> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.12 | Columnzxr10ACLLinkRuleOutVlanID | read-only | current | Value of outer vlan <1-4094> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.13 | Columnzxr10ACLLinkRuleInVlanRange | read-only | current | Range of inner vlan <1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.14 | Columnzxr10ACLLinkRuleOutVlanRange | read-only | current | Range of outer vlan <1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.15 | Columnzxr10ACLLinkRuleTimerangeName | read-only | current | Time range name (1-31 characters). This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.16 | Columnzxr10ACLLinkRuleBSrcMACRange1 | read-only | current | Match if source MAC address range is configured. When this is valid, zxr10ACLLinkRuleSrcMAC and zxr10ACLLinkRuleSrcMACWildcard are invalid, zxr10ACLLinkRuleSrc… |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.17 | Columnzxr10ACLLinkRuleSrcMACRg1Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of first source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.18 | Columnzxr10ACLLinkRuleSrcMACRg1Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of first source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.19 | Columnzxr10ACLLinkRuleBSrcMACRange2 | read-only | current | Match if second source MAC address range is configured. When this is valid, zxr10ACLLinkRuleSrcMAC and zxr10ACLLinkRuleSrcMACWildcard are invalid, zxr10ACLLink… |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.20 | Columnzxr10ACLLinkRuleSrcMACRg2Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of second source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.21 | Columnzxr10ACLLinkRuleSrcMACRg2Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of second source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.22 | Columnzxr10ACLLinkRuleBDestMACRange1 | read-only | current | Match if destination MAC address range is configured. When this is valid, zxr10ACLLinkRuleDestMAC and zxr10ACLLinkRuleDestMACWildcard are invalid, zxr10ACLLink… |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.23 | Columnzxr10ACLLinkRuleDestMACRg1Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of first destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.24 | Columnzxr10ACLLinkRuleDestMACRg1Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of first destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.25 | Columnzxr10ACLLinkRuleBDestMACRange2 | read-only | current | Match if second destination MAC address range is configured. When this is valid, zxr10ACLLinkRuleDestMAC and zxr10ACLLinkRuleDestMACWildcard are invalid, zxr10… |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.26 | Columnzxr10ACLLinkRuleDestMACRg2Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of second destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.27 | Columnzxr10ACLLinkRuleDestMACRg2Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of second destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.28 | Columnzxr10ACLLinkRuleDescription | read-only | current | Description for use (1-70 characters). |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.29 | Columnzxr10ACLLinkRuleLinkProtocolMask | read-only | current | Link protocal mask: <0-65535> valid value 65536 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.30 | Columnzxr10ACLLinkRuleInCosRange | read-only | current | Range of inner CoS: <0-7>-<0-7> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.31 | Columnzxr10ACLLinkRuleOutCosRange | read-only | current | Range of outer CoS: <0-7>-<0-7> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.32 | Columnzxr10ACLLinkRuleDsap | read-only | current | Destination service access point: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.33 | Columnzxr10ACLLinkRuleSsap | read-only | current | Source service access point: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4 | Nodezxr10ACLv4MixObjects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.4.1 | Tablezxr10ACLv4MixListTable | not-accessible | current | IPv4 Mixed ACL Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.1.1 | Rowzxr10ACLv4MixListEntry | not-accessible | current | IPv4Mix ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.1.1.1 | Columnzxr10ACLv4MixListName | read-only | current | Name of an IPv4 mixed access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2 | Tablezxr10ACLv4MixRuleTable | not-accessible | current | IPv4 Mixed ACL Rule Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1 | Rowzxr10ACLv4MixRuleEntry | not-accessible | current | IPv4Mix ACL effective leaf nodes: A leaf node which is effective or not depends on the type of rule. Rule types include standard type, ip type, tcp type, udp t… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.1 | Columnzxr10ACLv4MixRuleAclName | not-accessible | current | Name of an IPv4 mixed access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.2 | Columnzxr10ACLv4MixRuleRuleID | not-accessible | current | ID of this rule |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.3 | Columnzxr10ACLv4MixRulePermitDeny | read-only | current | deny : Specify packets to reject permit: Specify packets to forward |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.4 | Columnzxr10ACLv4MixRuleLinkProtocol | read-only | obsolete | Link protocal: <0-65535> valid value 65536 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.5 | Columnzxr10ACLv4MixRuleSrcMAC | read-only | current | <xxxx.xxxx.xxxx> Source MAC address |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.6 | Columnzxr10ACLv4MixRuleSrcMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Source MAC wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.7 | Columnzxr10ACLv4MixRuleDestMAC | read-only | current | <xxxx.xxxx.xxxx> Destination MAC address |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.8 | Columnzxr10ACLv4MixRuleDestMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Destination MAC wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.9 | Columnzxr10ACLv4MixRuleIncos | read-only | current | Value of inner cos: <0-7> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.10 | Columnzxr10ACLv4MixRuleOutCos | read-only | current | Value of outer cos: <0-7> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.11 | Columnzxr10ACLv4MixRuleInVlanID | read-only | current | Value of inner vlan <1-4094> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.12 | Columnzxr10ACLv4MixRuleOutVlanID | read-only | current | Value of outer vlan <1-4094> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.13 | Columnzxr10ACLv4MixRuleInVlanRange | read-only | current | Range of inner vlan <1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.14 | Columnzxr10ACLv4MixRuleOutVlanRange | read-only | current | Range of outer vlan <1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.15 | Columnzxr10ACLv4MixRuleSrcAddr | read-only | current | A.B.C.D Source address |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.16 | Columnzxr10ACLv4MixRuleSrcWildcard | read-only | current | A.B.C.D Wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.17 | Columnzxr10ACLv4MixRuleDestAddr | read-only | current | A.B.C.D Destination address |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.18 | Columnzxr10ACLv4MixRuleDestWildcard | read-only | current | A.B.C.D Destination wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.19 | Columnzxr10ACLv4MixRuleIpProtocol | read-only | current | <0-255> An IP protocol number std Standard rule type (65534) gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (1) igmp Internet Gr… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.20 | Columnzxr10ACLv4MixRuleSrcPortOpr | read-only | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.21 | Columnzxr10ACLv4MixRuleSrcPortValue | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.22 | Columnzxr10ACLv4MixRuleSrcPortRange | read-only | current | Port range: <0-65535>-<0-65535> Check zxr10ACLv4MixRuleSrcPortRange only when the value of zxr10ACLv4MixRuleSrcPortOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.23 | Columnzxr10ACLv4MixRuleDestPortOpr | read-only | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.24 | Columnzxr10ACLv4MixRuleDestPortValue | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.25 | Columnzxr10ACLv4MixRuleDestPortRange | read-only | current | Port range: <0-65535>-<0-65535> Check zxr10ACLv4MixRuleDestPortRange only when the value of zxr10ACLv4MixRuleDestPortOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.26 | Columnzxr10ACLv4MixRuleTCPEstablish | read-only | current | Match established connections. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.27 | Columnzxr10ACLv4MixRuleICMPType | read-only | current | ICMP type: <0-255> valid value 65535 invalid value specific value: alternate-address Alternate address (6) echo Echo (ping, 8) echo-reply Echo reply (0) inform… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.28 | Columnzxr10ACLv4MixRuleICMPCode | read-only | current | ICMP code: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.29 | Columnzxr10ACLv4MixRulePrecedence | read-only | current | Precedence level: <0-7> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.30 | Columnzxr10ACLv4MixRuleTOS | read-only | current | Type of service(ToS): <0-15> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.31 | Columnzxr10ACLv4MixRuleDSCP | read-only | current | DSCP value: <0-63> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.32 | Columnzxr10ACLv4MixRuleFragment | read-only | current | Fragment enable or disable flag. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.33 | Columnzxr10ACLv4MixRuleRstFlag | read-only | current | Match when the RST flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.34 | Columnzxr10ACLv4MixRuleAckFlag | read-only | current | Match when the ACK flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.35 | Columnzxr10ACLv4MixRuleFinFlag | read-only | current | Match when the FIN flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.36 | Columnzxr10ACLv4MixRuleSynFlag | read-only | current | Match when the SYN flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.37 | Columnzxr10ACLv4MixRulePshFlag | read-only | current | Match when the PSH flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.38 | Columnzxr10ACLv4MixRuleUrgFlag | read-only | current | Match when the URG flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.39 | Columnzxr10ACLv4MixRuleTimerangeName | read-only | current | Time range name (1-31 characters). This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.40 | Columnzxr10ACLv4MixRuleBSrcMACRange1 | read-only | current | Match if source MAC address range is configured. When this is valid, zxr10ACLv4MixRuleSrcMAC and zxr10ACLv4MixRuleSrcMACWildcard are invalid, zxr10ACLv4MixRule… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.41 | Columnzxr10ACLv4MixRuleSrcMACRg1Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of first source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.42 | Columnzxr10ACLv4MixRuleSrcMACRg1Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of first source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.43 | Columnzxr10ACLv4MixRuleBSrcMACRange2 | read-only | current | Match if second source MAC address range is configured. When this is valid, zxr10ACLv4MixRuleSrcMAC and zxr10ACLv4MixRuleSrcMACWildcard are invalid, zxr10ACLv4… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.44 | Columnzxr10ACLv4MixRuleSrcMACRg2Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of second source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.45 | Columnzxr10ACLv4MixRuleSrcMACRg2Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of second source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.46 | Columnzxr10ACLv4MixRuleBDestMACRange1 | read-only | current | Match if destination MAC address range is configured. When this is valid, zxr10ACLv4MixRuleDestMAC and zxr10ACLv4MixRuleDestMACWildcard are invalid, zxr10ACLv4… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.47 | Columnzxr10ACLv4MixRuleDestMACRg1Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of first destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.48 | Columnzxr10ACLv4MixRuleDestMACRg1Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of first destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.49 | Columnzxr10ACLv4MixRuleBDestMACRange2 | read-only | current | Match if second destination MAC address range is configured. When this is valid, zxr10ACLv4MixRuleDestMAC and zxr10ACLv4MixRuleDestMACWildcard are invalid, zxr… |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.50 | Columnzxr10ACLv4MixRuleDestMACRg2Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of second destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.51 | Columnzxr10ACLv4MixRuleDestMACRg2Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of second destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.52 | Columnzxr10ACLv4MixRuleLinkProtocolEx | read-only | current | Link protocal: <1536-65535> valid value 65536 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.53 | Columnzxr10ACLv4MixRuleDsap | read-only | current | Destination service access point: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.54 | Columnzxr10ACLv4MixRuleSsap | read-only | current | Source service access point: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5 | Nodezxr10ACLv6MixObjects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.5.1 | Tablezxr10ACLv6MixListTable | not-accessible | current | IPv6 Mixed ACL Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.1.1 | Rowzxr10ACLv6MixListEntry | not-accessible | current | IPv6 Mixed ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.1.1.1 | Columnzxr10ACLv6MixListName | read-only | current | Name of an IPv6 Mixed access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2 | Tablezxr10ACLv6MixRuleTable | not-accessible | current | IPv6 Mixed ACL Rule Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1 | Rowzxr10ACLv6MixRuleEntry | not-accessible | current | IPv6 Mixed ACL effective leaf nodes: A leaf node which is effective or not depends on the type of rule. Rule types include standard type, ip type, tcp type, ud… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.1 | Columnzxr10ACLv6MixRuleAclName | not-accessible | current | Name of an IPv6 Mixed access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.2 | Columnzxr10ACLv6MixRuleRuleID | not-accessible | current | ID of this rule |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.3 | Columnzxr10ACLv6MixRulePermitDeny | read-only | current | deny : Specify packets to reject permit: Specify packets to forward |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.4 | Columnzxr10ACLv6MixRuleLinkProtocol | read-only | obsolete | Link protocal: <0-65535> valid value 65536 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.5 | Columnzxr10ACLv6MixRuleSrcMAC | read-only | current | <xxxx.xxxx.xxxx> Source MAC address |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.6 | Columnzxr10ACLv6MixRuleSrcMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Source MAC wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.7 | Columnzxr10ACLv6MixRuleDestMAC | read-only | current | <xxxx.xxxx.xxxx> Destination MAC address |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.8 | Columnzxr10ACLv6MixRuleDestMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Destination MAC wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.9 | Columnzxr10ACLv6MixRuleIncos | read-only | current | Value of inner cos: <0-7> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.10 | Columnzxr10ACLv6MixRuleOutCos | read-only | current | Value of outer cos: <0-7> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.11 | Columnzxr10ACLv6MixRuleInVlanID | read-only | current | Value of inner vlan <1-4094> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.12 | Columnzxr10ACLv6MixRuleOutVlanID | read-only | current | Value of outer vlan <1-4094> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.13 | Columnzxr10ACLv6MixRuleInVlanRange | read-only | current | Range of inner vlan <1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.14 | Columnzxr10ACLv6MixRuleOutVlanRange | read-only | current | Range of outer vlan <1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.15 | Columnzxr10ACLv6MixRuleFlowlabel | read-only | current | Flowlabel value: <0-1048575> valid value 2147483647 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.16 | Columnzxr10ACLv6MixRuleSrcAddr | read-only | current | X:X::X:X Source address |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.17 | Columnzxr10ACLv6MixRuleSrcWildcard | read-only | current | <0-128> Source Wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.18 | Columnzxr10ACLv6MixRuleDestAddr | read-only | current | X:X::X:X Destination address |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.19 | Columnzxr10ACLv6MixRuleDestWildcard | read-only | current | <0-128> Destination Wildcard |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.20 | Columnzxr10ACLv6MixRuleIpProtocol | read-only | current | <0-255> An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (58) igmp Internet Group Management Protocol (2) ip… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.21 | Columnzxr10ACLv6MixRuleSrcPortOpr | read-only | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.22 | Columnzxr10ACLv6MixRuleSrcPortValue | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.23 | Columnzxr10ACLv6MixRuleSrcPortRange | read-only | current | Port range: <0-65535>-<0-65535> Check zxr10ACLv6MixRuleSrcPortRange only when the value of zxr10ACLv6MixRuleSrcPortOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.24 | Columnzxr10ACLv6MixRuleDestPortOpr | read-only | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.25 | Columnzxr10ACLv6MixRuleDestPortValue | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.26 | Columnzxr10ACLv6MixRuleDestPortRange | read-only | current | Port range: <0-65535>-<0-65535> Check zxr10ACLv6MixRuleDestPortRange only when the value of zxr10ACLv6MixRuleDestPortOpr is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.27 | Columnzxr10ACLv6MixRuleTCPEstablish | read-only | current | Match established connections. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.28 | Columnzxr10ACLv6MixRuleRstFlag | read-only | current | Match when the RST flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.29 | Columnzxr10ACLv6MixRuleAckFlag | read-only | current | Match when the ACK flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.30 | Columnzxr10ACLv6MixRuleFinFlag | read-only | current | Match when the FIN flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.31 | Columnzxr10ACLv6MixRuleSynFlag | read-only | current | Match when the SYN flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.32 | Columnzxr10ACLv6MixRulePshFlag | read-only | current | Match when the PSH flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.33 | Columnzxr10ACLv6MixRuleUrgFlag | read-only | current | Match when the URG flag set or not. This is an optional node. invalid value: (65535) |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.34 | Columnzxr10ACLv6MixRuleICMPType | read-only | current | ICMP type: <0-255> valid value 65535 invalid value specific value: destination-unreachable Destination unreachable (1) echo-reply Echo reply (129) echo-request… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.35 | Columnzxr10ACLv6MixRuleICMPCode | read-only | current | ICMP code: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.36 | Columnzxr10ACLv6MixRuleRouting | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.37 | Columnzxr10ACLv6MixRuleAuthen | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.38 | Columnzxr10ACLv6MixRuleDestops | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.39 | Columnzxr10ACLv6MixRuleFragments | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.40 | Columnzxr10ACLv6MixRuleHopByHop | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.41 | Columnzxr10ACLv6MixRuleEsp | read-only | current | Match if the specify IPv6 header is present. This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.42 | Columnzxr10ACLv6MixRuleDSCP | read-only | current | DSCP value: <0-63> valid value 255 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.43 | Columnzxr10ACLv6MixRuleTc | read-only | current | Traffic Class value: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.44 | Columnzxr10ACLv6MixRuleTimerangeName | read-only | current | Time range name (1-31 characters). This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.45 | Columnzxr10ACLv6MixRuleBSrcMACRange1 | read-only | current | Match if source MAC address range is configured. When this is valid, zxr10ACLv6MixRuleSrcMAC and zxr10ACLv6MixRuleSrcMACWildcard are invalid, zxr10ACLv6MixRule… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.46 | Columnzxr10ACLv6MixRuleSrcMACRg1Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of first source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.47 | Columnzxr10ACLv6MixRuleSrcMACRg1Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of first source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.48 | Columnzxr10ACLv6MixRuleBSrcMACRange2 | read-only | current | Match if second source MAC address range is configured. When this is valid, zxr10ACLv6MixRuleSrcMAC and zxr10ACLv6MixRuleSrcMACWildcard are invalid, zxr10ACLv6… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.49 | Columnzxr10ACLv6MixRuleSrcMACRg2Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of second source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.50 | Columnzxr10ACLv6MixRuleSrcMACRg2Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of second source MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.51 | Columnzxr10ACLv6MixRuleBDestMACRange1 | read-only | current | Match if destination MAC address range is configured. When this is valid, zxr10ACLv6MixRuleDestMAC and zxr10ACLv6MixRuleDestMACWildcard are invalid, zxr10ACLv6… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.52 | Columnzxr10ACLv6MixRuleDestMACRg1Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of first destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.53 | Columnzxr10ACLv6MixRuleDestMACRg1Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of first destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.54 | Columnzxr10ACLv6MixRuleBDestMACRange2 | read-only | current | Match if second destination MAC address range is configured. When this is valid, zxr10ACLv6MixRuleDestMAC and zxr10ACLv6MixRuleDestMACWildcard are invalid, zxr… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.55 | Columnzxr10ACLv6MixRuleDestMACRg2Min | read-only | current | <xxxx.xxxx.xxxx> Lower limit of second destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.56 | Columnzxr10ACLv6MixRuleDestMACRg2Max | read-only | current | <xxxx.xxxx.xxxx> Upper limit of second destination MAC address range |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.57 | Columnzxr10ACLv6MixRuleLinkProtocolEx | read-only | current | Link protocal: <1536-65535> valid value 65536 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.58 | Columnzxr10ACLv6MixRuleSrcAddrMaskFlag | read-only | current | This flag indicates the way of configuring IPv6 source address mask, such as zxr10ACLv6MixRuleSrcWildcard, zxr10ACLv6MixRuleSrcWildcardBits. If this flag is va… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.59 | Columnzxr10ACLv6MixRuleSrcWildcardBits | read-only | current | <X:X::X:X> Source address wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.60 | Columnzxr10ACLv6MixRuleDstAddrMaskFlag | read-only | current | This flag indicates the way of configuring IPv6 destination address mask, such as zxr10ACLv6MixRuleDestWildcard, zxr10ACLv6MixRuleDstWildcardBits. If this flag… |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.61 | Columnzxr10ACLv6MixRuleDstWildcardBits | read-only | current | <X:X::X:X> Destination address wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.62 | Columnzxr10ACLv6MixRuleDsap | read-only | current | Destination service access point: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.63 | Columnzxr10ACLv6MixRuleSsap | read-only | current | Source service access point: <0-255> valid value 65535 invalid value This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.6 | Nodezxr10ACLUsrProtocolObjects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.6.1 | Tablezxr10ACLUsrProtocolListTable | not-accessible | current | User Protocol ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.1.1 | Rowzxr10ACLUsrProtocolListEntry | not-accessible | current | User Protocol ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.1.1.1 | Columnzxr10ACLUsrProtocolListName | read-only | current | Name of a User Protocol access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.2 | Tablezxr10ACLUsrProtocolRuleTable | not-accessible | current | User Protocol Rule Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1 | Rowzxr10ACLUsrProtocolRuleEntry | not-accessible | current | User Protocol ACL effective leaf nodes: All of the leaf nodes are effective: zxr10ACLUsrProtocolRuleAclName, zxr10ACLUsrProtocolRuleRuleID, zxr10ACLUsrProtocol… |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.1 | Columnzxr10ACLUsrProtocolRuleAclName | not-accessible | current | Name of a User Protocol access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.2 | Columnzxr10ACLUsrProtocolRuleRuleID | not-accessible | current | ID of this rule |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.3 | Columnzxr10ACLUsrProtocolRuleEtherType | read-only | current | Ether type of User Protocol: <0-65535> valid value 65536 invalid value |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.4 | Columnzxr10ACLUsrProtocolRuleDestMAC | read-only | current | <xxxx.xxxx.xxxx> Destination MAC address |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.5 | Columnzxr10ACLUsrProtocolRuleDMACMask | read-only | current | <xxxx.xxxx.xxxx> Destination MAC address wildcard This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.6 | Columnzxr10ACLUsrProtocolRuleAnyEther | read-only | current | Match any ethernet type if the value is valid. |
| 1.3.6.1.4.1.3902.3.6000.602.2.7 | Nodezxr10ACLUsrDefObjects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.7.1 | Tablezxr10ACLUsrDefListTable | not-accessible | current | User defined ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.1.1 | Rowzxr10ACLUsrDefListEntry | not-accessible | current | User defined ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.1.1.1 | Columnzxr10ACLUsrDefListName | read-only | current | Name of a User defined access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2 | Tablezxr10ACLUsrDefRuleTable | not-accessible | current | User defined Rule Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1 | Rowzxr10ACLUsrDefRuleEntry | not-accessible | current | User defined ACL effective leaf nodes: All of the leaf nodes are effective: zxr10ACLUsrDefRuleAclName, zxr10ACLUsrDefRuleRuleID, zxr10ACLUsrDefRulePermitDeny, … |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.1 | Columnzxr10ACLUsrDefRuleAclName | not-accessible | current | Name of a User defined access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.2 | Columnzxr10ACLUsrDefRuleRuleID | not-accessible | current | ID of this rule |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.3 | Columnzxr10ACLUsrDefRulePermitDeny | read-only | current | deny : Specify packets to reject permit: Specify packets to forward |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.4 | Columnzxr10ACLUsrDefRuleFrameType | read-only | current | ethernet2 Ethernet version II frame llc-snap LLC/SNAP frame in IEEE802.3 sap SAP frame in IEEE802.3 any Any frame |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.5 | Columnzxr10ACLUsrDefRuleTagStatus | read-only | current | untag Status with no VLAN tag single-tag Status with VLAN tag double-tag Status with outer and inner VLAN tag any Any status with VLAN tag |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.6 | Columnzxr10ACLUsrDefRuleIpFlag | read-only | current | ip4-hdr-only Segment of only IPv4 header ip6-hdr-only Segment of only IPv6 header ip6-fragment Segment of IPv6 fragment ip4-over-ip4 Segment of IPv4 datagram o… |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.7 | Columnzxr10ACLUsrDefRuleAnySegment | read-only | current | Any rule segment. |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.8 | Columnzxr10ACLUsrDefRuleOffSet1 | read-only | current | First offset from packet head (2+4*n, n = 0, 1, 2, ...) 2-126 valid value 65535 invalid value. |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.9 | Columnzxr10ACLUsrDefRuleRuleString1 | read-only | current | First user defined hexadecimal string(must be 10 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.10 | Columnzxr10ACLUsrDefRuleRuleMask1 | read-only | current | First user defined hexadecimal string mask(must be 10 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.11 | Columnzxr10ACLUsrDefRuleOffSet2 | read-only | current | Second offset from packet head (2+4*n, n = 0, 1, 2, ...) 2-126 valid value 65535 invalid value. |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.12 | Columnzxr10ACLUsrDefRuleRuleString2 | read-only | current | Second user defined hexadecimal string(must be 10 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.13 | Columnzxr10ACLUsrDefRuleRuleMask2 | read-only | current | Second user defined hexadecimal string mask(must be 10 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.14 | Columnzxr10ACLUsrDefRuleOffSet3 | read-only | current | Third offset from packet head (2+4*n, n = 0, 1, 2, ...) 2-126 valid value 65535 invalid value. |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.15 | Columnzxr10ACLUsrDefRuleRuleString3 | read-only | current | Third user defined hexadecimal string(must be 10 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.16 | Columnzxr10ACLUsrDefRuleRuleMask3 | read-only | current | Third user defined hexadecimal string mask(must be 10 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.17 | Columnzxr10ACLUsrDefRuleOffSet4 | read-only | current | Fourth offset from packet head (2+4*n, n = 0, 1, 2, ...) 2-126 valid value 65535 invalid value. |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.18 | Columnzxr10ACLUsrDefRuleRuleString4 | read-only | current | Fourth user defined hexadecimal string(must be 10 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.19 | Columnzxr10ACLUsrDefRuleRuleMask4 | read-only | current | Fourth user defined hexadecimal string mask(must be 10 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.20 | Columnzxr10ACLUsrDefRuleTimerangeName | read-only | current | Time range name (1-31 characters). This is an optional node. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8 | Nodezxr10ACLv4VxlanObjects | |||
| 1.3.6.1.4.1.3902.3.6000.602.2.8.1 | Tablezxr10ACLv4VxlanListTable | not-accessible | current | IPv4 VXLAN ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.1.1 | Rowzxr10ACLv4VxlanListEntry | not-accessible | current | IPv4 VXLAN ACL |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.1 | Columnzxr10ACLv4VxlanListName | not-accessible | current | Name of an IPv4 VXLAN access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.2 | Columnzxr10ACLv4VxlanListWithoutVni | read-create | current | If the flag is setted with valid, this acl can not be configed with VNI. If the flag is setted with invalid, this acl can be configed with VNI. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.100 | Columnzxr10ACLv4VxlanListRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2 | Tablezxr10ACLv4VxlanRuleTable | not-accessible | current | IPv4 VXLAN ACL Rule Table |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1 | Rowzxr10ACLv4VxlanRuleEntry | not-accessible | current | IPv4 VXLAN ACL effective leaf nodes: All of the leaf nodes are effective: conflict leaf nodes: These 3 nodes below conflict, can only config one at most: zxr10… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.1 | Columnzxr10ACLv4VxlanRuleAclName | not-accessible | current | Name of an IPv4 VXLAN access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.2 | Columnzxr10ACLv4VxlanRuleRuleID | not-accessible | current | ID of this rule |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.3 | Columnzxr10ACLv4VxlanRulePermitDeny | read-create | current | The node has two values: 1. deny means that packets can not be handled. 2. permit means that packets can be handled. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.4 | Columnzxr10ACLv4VxlanRuleInnerFlag | read-create | current | If the flag is setted with valid, the inner infomation is meaningful. If the flag is setted with invalid, the inner infomation is not meaningful. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.5 | Columnzxr10ACLv4VxlanRuleIpProtocolIn | read-create | current | <0-255> An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol (2) ip A… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.6 | Columnzxr10ACLv4VxlanRuleSrcAddrIn | read-create | current | A.B.C.D Source address |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.7 | Columnzxr10ACLv4VxlanRuleSrcIMaskIn | read-create | current | A.B.C.D Wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.8 | Columnzxr10ACLv4VxlanRuleSrcAnyIn | read-create | current | If the flag is setted with valid, the rule is effective to any source address. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.9 | Columnzxr10ACLv4VxlanRuleDstAddrIn | read-create | current | A.B.C.D Destination address |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.10 | Columnzxr10ACLv4VxlanRuleDstIMaskIn | read-create | current | A.B.C.D Destination wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.11 | Columnzxr10ACLv4VxlanRuleDstAnyIn | read-create | current | If the flag is setted with valid, the rule is effective to any destination address. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.12 | Columnzxr10ACLv4VxlanRuleSrcPortOprIn | read-create | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.13 | Columnzxr10ACLv4VxlanRuleSrcPortValIn | read-create | current | <0-65535> Port number UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) … |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.14 | Columnzxr10ACLv4VxlanRuleSrcPortRgIn | read-create | current | Port range: <0-65535>-<0-65535> Check this node only when the value of zxr10ACLv4RuleSrcPortOprIn is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.15 | Columnzxr10ACLv4VxlanRuleDstPortOprIn | read-create | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.16 | Columnzxr10ACLv4VxlanRuleDstPortValIn | read-create | current | <0-65535> Port number UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) … |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.17 | Columnzxr10ACLv4VxlanRuleDstPortRgIn | read-create | current | Port range: <0-65535>-<0-65535> Check this node only when the value of zxr10ACLv4VxlanRuleDestPortOprIn is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.18 | Columnzxr10ACLv4VxlanRulePrecedenceIn | read-create | current | Precedence level: <0-7> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRuleTOSIn and zxr10ACLv4VxlanRuleDSCPIn. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.19 | Columnzxr10ACLv4VxlanRuleTOSIn | read-create | current | Type of service(ToS): <0-15> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceIn and zxr10ACLv4Vxl… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.20 | Columnzxr10ACLv4VxlanRuleDSCPIn | read-create | current | DSCP value: <0-63> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceIn and zxr10ACLv4VxlanRuleTOSIn |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.21 | Columnzxr10ACLv4VxlanRuleVniID | read-create | current | VXLAN id. Range is 1 to 16777215. 0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.22 | Columnzxr10ACLv4VxlanRuleOuterFlag | read-create | current | If the flag is setted with valid, the outer infomatino is meaningful. If the flag is setted with invalid, the outer infomation is not meaningful. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.23 | Columnzxr10ACLv4VxlanRuleIpProtocolOut | read-create | current | udp User Datagram Protocol(17) 65533 Invalid value. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.24 | Columnzxr10ACLv4VxlanRuleSrcAddrOut | read-create | current | A.B.C.D Source address |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.25 | Columnzxr10ACLv4VxlanRuleSrcIMaskOut | read-create | current | A.B.C.D Wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.26 | Columnzxr10ACLv4VxlanRuleSrcAnyOut | read-create | current | If the flag is setted with valid, the rule is effective to any dest address. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.27 | Columnzxr10ACLv4VxlanRuleDstAddrOut | read-create | current | A.B.C.D Destination address |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.28 | Columnzxr10ACLv4VxlanRuleDstIMaskOut | read-create | current | A.B.C.D Destination wildcard bits |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.29 | Columnzxr10ACLv4VxlanRuleDstAnyOut | read-create | current | If the flag is setted with valid, the rule is effective to any destination address. |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.30 | Columnzxr10ACLv4VxlanRuleSrcPortOprOut | read-create | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.31 | Columnzxr10ACLv4VxlanRuleSrcPortValOut | read-create | current | <0-65535> Port number UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) … |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.32 | Columnzxr10ACLv4VxlanRuleSrcPortRgOut | read-create | current | Port range: <0-65535>-<0-65535> Check this node only when the value of zxr10ACLv4RuleSrcPortOprIn is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.33 | Columnzxr10ACLv4VxlanRuleDstPortOprOut | read-create | current | This is an optional node. eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.34 | Columnzxr10ACLv4VxlanRuleDstPortValOut | read-create | current | <0-65535> Port number UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) … |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.35 | Columnzxr10ACLv4VxlanRuleDstPortRgOut | read-create | current | Port range: <0-65535>-<0-65535> Check this node only when the value of zxr10ACLv4VxlanRuleDestPortOprOut is range(7). |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.36 | Columnzxr10ACLv4VxlanRulePrecedenceOut | read-create | current | Precedence level: <0-7> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRuleTOSOut and zxr10ACLv4VxlanRuleDSCPO… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.37 | Columnzxr10ACLv4VxlanRuleTOSOut | read-create | current | Type of service(ToS): <0-15> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceOut and zxr10ACLv4Vx… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.38 | Columnzxr10ACLv4VxlanRuleDSCPOut | read-create | current | DSCP value: <0-63> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceOut and zxr10ACLv4VxlanRuleTOS… |
| 1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.100 | Columnzxr10ACLv4VxlanRuleRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.602.3 | Nodezxr10ACLNotifications | |||
| 1.3.6.1.4.1.3902.3.6000.602.4 | Nodezxr10ACLConformance | |||
| 1.3.6.1.4.1.3902.3.6000.602.4.1 | Nodezxr10ACLGroups | |||
| 1.3.6.1.4.1.3902.3.6000.602.4.1.1 | Groupzxr10ACLv4Group | current | IPv4 ACL group. | |
| 1.3.6.1.4.1.3902.3.6000.602.4.1.2 | Groupzxr10ACLv6Group | current | IPv6 ACL group. | |
| 1.3.6.1.4.1.3902.3.6000.602.4.1.3 | Groupzxr10ACLLinkGroup | current | Link ACL group. | |
| 1.3.6.1.4.1.3902.3.6000.602.4.1.4 | Groupzxr10ACLv4MixGroup | current | IPv4 mixed ACL group. | |
| 1.3.6.1.4.1.3902.3.6000.602.4.1.5 | Groupzxr10ACLv6MixGroup | current | IPv6 mixed ACL group. | |
| 1.3.6.1.4.1.3902.3.6000.602.4.1.6 | Groupzxr10ACLUsrProtocolGroup | current | User protocol ACL group. | |
| 1.3.6.1.4.1.3902.3.6000.602.4.1.7 | Groupzxr10ACLUsrDefinedGroup | current | User defined ACL group. | |
| 1.3.6.1.4.1.3902.3.6000.602.4.1.8 | Groupzxr10ACLv4VxlanGroup | current | IPv4 VXLAN ACL group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AclPermitDeny | INTEGER{permit(1),deny(2)} | current | permit = 1,deny = 2. |
| AclTcpFlagType | INTEGER{plus(1),minus(2),unset(65535)} | current | plus(+) = 1,minus(-) = 2,unset = 65535. |
| AclValidOrNot | INTEGER{valid(1),invalid(2)} | current | valid = 1,invalid = 2. |