ZXR10-MPLS-L2VPN
71 objects
ZXROS v4.6.03 Mpls L2vpn query and configuration MIB
Imported Objects
| RFC1155-SMI | IpAddress |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| ZXR10-SMI | zxr10L2vpn |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.104.1 | Identityzxr10MplsL2vpnMIB | ZXROS v4.6.03 Mpls L2vpn query and configuration MIB | ||
| 1.3.6.1.4.1.3902.3.104.1.0 | Nodezxr10MplsL2vpnObjects | |||
| 1.3.6.1.4.1.3902.3.104.1.0.1 | Tablezxr10MplsL2vpnInstanceTable | not-accessible | current | Mpls L2vpn instance query table |
| 1.3.6.1.4.1.3902.3.104.1.0.1.1 | Rowzxr10MplsL2vpnInstanceEntry | not-accessible | current | Information of Mpls L2vpn instance configured on a PE |
| 1.3.6.1.4.1.3902.3.104.1.0.1.1.1 | Columnzxr10MplsL2vpnInstanceType | read-only | current | Mpls L2vpn type,including:vpls,vpws and ipls |
| 1.3.6.1.4.1.3902.3.104.1.0.1.1.2 | Columnzxr10MplsL2vpnInstanceVCId | read-only | current | Mpls L2vpn unique vcid value on a PE. |
| 1.3.6.1.4.1.3902.3.104.1.0.1.1.3 | Columnzxr10MplsL2vpnInstanceVpnName | read-only | current | Name specified for each configured Mpls L2vpn. |
| 1.3.6.1.4.1.3902.3.104.1.0.1.1.4 | Columnzxr10MplsL2vpnPwCounts | read-only | current | Number of PWs that belongs to a certain Mpls L2vpn |
| 1.3.6.1.4.1.3902.3.104.1.1 | Nodezxr10MplsL2vpnPWObjects | |||
| 1.3.6.1.4.1.3902.3.104.1.1.1 | Tablezxr10MplsL2vpnPWTable | not-accessible | current | Mpls L2vpn PW query table. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1 | Rowzxr10MplsL2vpnPWEntry | not-accessible | current | Informatin of Mpls L2vpn PW configured on a PE. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.1 | Columnzxr10MplsL2vpnPWVcId | read-only | current | VcId of Mpls L2vpn that PW belongs to.It can't be zero. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.2 | Columnzxr10MplsL2vpnPWType | read-only | current | Type of PW:hub or spoke,used in H-VPLS. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.3 | Columnzxr10MplsL2vpnPWEncapsulationType | read-only | current | Mpls L2vpn PW encapsulation type. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.4 | Columnzxr10MplsL2vpnPWVlanid | read-only | current | if zxr10MplsL2vpnPWEncapsulationType is eth-vlan type,this value represents vlan id encapsulated for L2vpn interface.It will be zero otherwise. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.5 | Columnzxr10MplsL2vpnPWPsnType | read-only | current | Type of external tunnel for this PW to be carried on. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.6 | Columnzxr10MplsL2vpnPWTunnelid | read-only | current | If zxr10MplsL2vpnPWPsnType is TE tunnel,this value represents Id of TE tunnel for this PW to be carried on. It will be zero otherwise. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.7 | Columnzxr10MplsL2vpnPWInlabel | read-only | current | The PW internal label used in the inbound direction,ie label locally allocated. If the label is not yet known,the object should return a value of 0xFFFFFFFF. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.8 | Columnzxr10MplsL2vpnPWOutlabel | read-only | current | The PW internal label used in the outbound direction,ie label allocated by remote peer.If the label is not yet known,the object should return a value of 0xFFFF… |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.9 | Columnzxr10MplsL2vpnPWCbit | read-only | current | Defines if the control word will be sent with each packet by the local node. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.10 | Columnzxr10MplsL2vpnPWStatus | read-only | current | If PW has finished negotiation with remote peer including internal label and other parameters,then PW will be in established status. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.11 | Columnzxr10MplsL2vpnPWLocalGroupId | read-only | current | Used in the Group ID field sent to peer within the maintenance protocol used for PW setup. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.12 | Columnzxr10MplsL2vpnPWLocalEncapsulationType | read-only | current | Local Mpls L2vpn PW encapsulation type. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.13 | Columnzxr10MplsL2vpnPWLocalLabel | read-only | current | PW internal label locally allocated.If the label is not yet known, the object should return a value of 0xFFFFFFFF. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.14 | Columnzxr10MplsL2vpnPWLocalCbit | read-only | current | Local configuration of the control word. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.15 | Columnzxr10MplsL2vpnPWLocalPortName | read-only | current | Name of local interface that PW has been configured on. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.16 | Columnzxr10MplsL2vpnPWLocalRouterId | read-only | current | Router ID of local PE. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.17 | Columnzxr10MplsL2vpnPWLocalIfMtu | read-only | current | Locally supported MTU size over the interface associated with the PW. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.18 | Columnzxr10MplsL2vpnPWRemoteGroupId | read-only | current | Obtained from the Group ID field as received via the signaling protocol used for PW setup. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.19 | Columnzxr10MplsL2vpnPWRemoteEncapsulationType | read-only | current | Remote Mpls L2vpn PW encapsulation type. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.20 | Columnzxr10MplsL2vpnPWRemoteLabel | read-only | current | PW internal label allocated by remote peer.If the label is not yet known, the object should return a value of 0xFFFFFFFF. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.21 | Columnzxr10MplsL2vpnPWRemoteCbit | read-only | current | Remote configuration of the control word. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.22 | Columnzxr10MplsL2vpnPWRemotePortName | read-only | current | Name of remote interface that PW has been configured on. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.23 | Columnzxr10MplsL2vpnPWRemoteRouterId | read-only | current | Router ID of remote PE. |
| 1.3.6.1.4.1.3902.3.104.1.1.1.1.24 | Columnzxr10MplsL2vpnPWRemoteIfMtu | read-only | current | Supported MTU size of remote peer over the interface associated with the PW. |
| 1.3.6.1.4.1.3902.3.104.1.2 | Nodezxr10MplsL2vpnVpwsIfObjects | |||
| 1.3.6.1.4.1.3902.3.104.1.2.1 | Tablezxr10MplsL2vpnVpwsIfTable | not-accessible | current | Mpls L2vpn instance query table |
| 1.3.6.1.4.1.3902.3.104.1.2.1.1 | Rowzxr10MplsL2vpnVpwsIfEntry | not-accessible | current | Information of Mpls L2vpn instance configured on a PE |
| 1.3.6.1.4.1.3902.3.104.1.2.1.1.1 | Columnzxr10MplsL2vpnVpwsIfIndex | read-only | current | Index of the VPWS configuration interface. |
| 1.3.6.1.4.1.3902.3.104.1.2.1.1.2 | Columnzxr10MplsL2vpnVpwsIfName | read-only | current | Name of the VPWS configuration interface. |
| 1.3.6.1.4.1.3902.3.104.1.2.1.1.3 | Columnzxr10MplsL2vpnVpwsIfEncapsulationType | read-only | current | Encapsulation type of the VPWS configuration interface. |
| 1.3.6.1.4.1.3902.3.104.1.2.1.1.4 | Columnzxr10MplsL2vpnVpwsIfVcid | read-only | current | Vcid of the VPWS configured on this interface. |
| 1.3.6.1.4.1.3902.3.104.1.2.1.1.5 | Columnzxr10MplsL2vpnVpwsIfVpnType | read-only | current | Type of the L2VPN configured on this interface. |
| 1.3.6.1.4.1.3902.3.104.1.3 | Nodezxr10MplsL2vpnNotifications | |||
| 1.3.6.1.4.1.3902.3.104.1.3.1 | NotificationmplsL2vpnGenericInterfaceTrap | current | When one of following conditions happens: (1)Admini,phy or protocol status of a interface is down and it has no children. (2)Interface is off and it has no chi… | |
| 1.3.6.1.4.1.3902.3.104.1.3.2 | NotificationmplsL2vpnMatchInterfaceTrap | current | When one of following conditions happens: (1)Admini,phy or protocol status of a interface is down and it has children. (2)Interface is off and it has children.… | |
| 1.3.6.1.4.1.3902.3.104.1.3.3 | NotificationmplsL2vpnGenericProtocolTrap | current | When one of following conditions happens: (1)Receives a VC label withdraw message from remote peer. (2)Deletes a VPWS VC. (3)Delete a VPLS peer. (4)Protocol pa… | |
| 1.3.6.1.4.1.3902.3.104.1.3.4 | NotificationmplsL2vpnSessionDownTrap | current | When session to VC peer is down,all the VC that have been bound to mpls Lsp Tunnel will be down;this kind of trap will be sent. | |
| 1.3.6.1.4.1.3902.3.104.1.3.5 | NotificationmplsL2vpnVplsDeleteTrap | current | When delete a VPLS instance.,this kind of trap will be sent. | |
| 1.3.6.1.4.1.3902.3.104.1.3.6 | NotificationmplsL2vpnLinkTrap | current | When one of following conditions happens: (1)The PSN route is off. (2)Can't find outer mpls tunnel label. (3)Can't find outer TE tunnel label. this type of Tra… | |
| 1.3.6.1.4.1.3902.3.104.1.3.7 | NotificationmplsL2vpnPsnRouteDownTrap | current | When PSN route between PE is down,all the VC between them will be down; this type of Trap pdu will be sent. | |
| 1.3.6.1.4.1.3902.3.104.1.3.8 | NotificationmplsL2vpnTETunnelDownTrap | current | When one TE Tunnel between is dwon,all the VC between them which has been bound to this tunnel will be down;this type of Trap pdu will be sent | |
| 1.3.6.1.4.1.3902.3.104.1.4 | Nodezxr10MplsL2vpnTrapObjects | |||
| 1.3.6.1.4.1.3902.3.104.1.4.1 | Scalarzxr10MplsL2vpnTrapIfIndex | read-only | current | If a L2vpn configuration interface is down,a interface down trap pdu will be sent;zxr10MplsL2vpnTrapIfIndex is index of this interface in if table. |
| 1.3.6.1.4.1.3902.3.104.1.4.2 | Scalarzxr10MplsL2vpnTrapIfName | read-only | current | If a L2vpn configuration interface is down,a interface down trap will be sent;zxr10MplsL2vpnTrapIfName is name of this interface. |
| 1.3.6.1.4.1.3902.3.104.1.4.3 | Scalarzxr10MplsL2vpnTrapLevel | read-only | current | Alerting level of Trap pdu. |
| 1.3.6.1.4.1.3902.3.104.1.4.4 | Scalarzxr10MplsL2vpnTrapDetail | read-only | current | Detailed information of Trap arising. |
| 1.3.6.1.4.1.3902.3.104.1.4.5 | Scalarzxr10MplsL2vpnTrapVcid | read-only | current | Vcid of L2vpn affected. |
| 1.3.6.1.4.1.3902.3.104.1.4.6 | Scalarzxr10MplsL2vpnTrapPeerAddress | read-only | current | Peer Address of VC affected. |
| 1.3.6.1.4.1.3902.3.104.1.4.7 | Scalarzxr10MplsL2vpnTrapVpnType | read-only | current | Peer Address of VC affected. |
| 1.3.6.1.4.1.3902.3.104.1.4.8 | Scalarzxr10MplsL2vpnTrapTETunnelId | read-only | current | TE Tunnel Id which VC has been bound to. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| InterfaceIndex | Integer32 (1..2147483647) | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must re… |
| MplsL2vpnPWCbit | INTEGER { cword-DISABLE(0), cword-ENABLE(1) } | current | Mpls L2vpn PW type |
| MplsL2vpnPWEncapsulationType | INTEGER { encap-UNKNOWN(0), encap-FR-DLCI(1), encap-ATM-AAL5(2), encap-ATM-TRANSCELL(3), encap-ETH-VLAN(4), encap-ETH(5), encap-HDLC(6), encap-PPP(7), encap-CEM(8), encap-ATM-VCC(9), encap-ATM-VPC(10) } | current | Mpls L2vpn PW encapsulation type |
| MplsL2vpnPWPsnType | INTEGER { unknown-tunnel(0), mpls-tunnel(1), te-tunnel(2) } | current | Mpls L2vpn PW external label encapsulation type |
| MplsL2vpnPWStatus | INTEGER { not-established(0), established(1) } | current | Mpls L2vpn PW status |
| MplsL2vpnPWType | INTEGER { pw-UNKNOWN(0), pw-SPOKE(1), pw-HUB(2) } | current | Mpls L2vpn PW type |
| MplsL2vpnTrapDetail | INTEGER { if-phy-down(1), if-proto-down(2), if-admini-down(3), if-disappear(4), if-encap-chg(5), if-mtu-chg(6), link-no-route(7), link-te-tunnel-down(8), link-no-mpls-tunnel(9), link-no-te-tunnel(10), proto-vc-withdraw(11), proto-sess-down(12), proto-no-vpws(13), proto-no-vpls-peer(14), proto-vctype-negotiate-fail(15), proto-mtu-negotiate-fail(16), proto-cbit-negotiate-fail(17), proto-no-vfi(18) } | current | Mpls L2vpn Trap infromation in detail. |
| MplsL2vpnTrapLevel | INTEGER { emergencies(1), alerts(2), critical(3), errors(4), warnings(5), notifications(6), informational(7), debugging(8) } | current | Mpls L2vpn Trap level. |
| MplsL2vpnType | INTEGER { l2vpn-UNKNOWN(0), l2vpn-VPWS(1), l2vpn-VPLS(2), l2vpn-IPLS(3) } | current | Mpls L2vpn type |