ZXR10-SQA-MIB
410 objects
ZXROS SMI MIB
Imported Objects
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | Counter64 DisplayString MacAddress NOTIFICATION-TYPE RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.3 | Nodezxr10 | |||
| 1.3.6.1.4.1.3902.3.6000 | Nodezxr10RosngMIB | |||
| 1.3.6.1.4.1.3902.3.6000.132 | IdentitysqaMib | ZXROS SMI MIB | ||
| 1.3.6.1.4.1.3902.3.6000.132.1 | TablesqaTestTable | not-accessible | current | sqa test entity configuration |
| 1.3.6.1.4.1.3902.3.6000.132.1.1 | RowsqaTestEntry | not-accessible | current | sqa test entity configuration table |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.1 | ColumnsqaTestNum | read-only | current | sqa test num. The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.2 | ColumnsqaTestType | read-only | current | sqa test type |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.3 | ColumnsqaTestVrf | read-only | current | sqa test vrf |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.4 | ColumnsqaTestDesIP | read-only | current | sqa des ip |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.5 | ColumnsqaTestDesPort | read-only | current | sqa des port |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.6 | ColumnsqaTestSourceIP | read-only | current | sqa test source ip |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.7 | ColumnsqaTestRepeat | read-only | current | sqa test repeat |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.8 | ColumnsqaTestSize | read-only | current | sqa test size |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.9 | ColumnsqaTestTos | read-only | current | sqa test tos,256 is the invalid value |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.10 | ColumnsqaTestTtl | read-only | current | sqa test ttl |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.11 | ColumnsqaTestTimeout | read-only | obsolete | sqa test timeout |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.12 | ColumnsqaTestInterval | read-only | current | sqa test interval |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.13 | ColumnsqaTestFtpName | read-only | current | sqa test ftp name |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.14 | ColumnsqaTestFtpPassword | read-only | current | sqa test ftp encrypted password, the length of this password is 64 |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.15 | ColumnsqaTestFtpFileName | read-only | current | sqa test ftp file name |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.16 | ColumnsqaTestFtpRoot | read-only | current | sqa test ftp root |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.18 | ColumnsqaTestTrapenable | read-only | current | sqa test trap enable |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.19 | ColumnsqaTestTrapPercent | read-only | current | sqa test trap percent |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.21 | ColumnsqaTestStatus | read-only | current | sqa test status |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.22 | ColumnsqaTestTimeRange | read-only | current | sqa test time range |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.23 | ColumnsqaTestDestinationUrl | read-only | current | sqa test destination url |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.24 | ColumnsqaTestDscp | read-only | current | sqa test dscp,255 is the invalid value |
| 1.3.6.1.4.1.3902.3.6000.132.1.1.25 | ColumnsqaTestSnmpCommunity | read-only | current | sqa test encrypted community, the length of this community is 64 |
| 1.3.6.1.4.1.3902.3.6000.132.2 | NodesqaTcpServerGrp | |||
| 1.3.6.1.4.1.3902.3.6000.132.2.1 | ScalarsqaTcpServerVrf | read-only | obsolete | sqa tcp server vrf |
| 1.3.6.1.4.1.3902.3.6000.132.2.2 | ScalarsqaTcpServerIP | read-only | current | sqa tcp server ip |
| 1.3.6.1.4.1.3902.3.6000.132.2.3 | ScalarsqaTcpServerPort | read-only | current | sqa tcp server port |
| 1.3.6.1.4.1.3902.3.6000.132.3 | NodesqaUdpServerGrp | |||
| 1.3.6.1.4.1.3902.3.6000.132.3.1 | ScalarsqaUdpServerVrf | read-only | obsolete | sqa udp server vrf |
| 1.3.6.1.4.1.3902.3.6000.132.3.2 | ScalarsqaUdpServerIP | read-create | current | sqa udp server ip |
| 1.3.6.1.4.1.3902.3.6000.132.3.3 | ScalarsqaUdpServerPort | read-create | current | sqa udp server port |
| 1.3.6.1.4.1.3902.3.6000.132.10 | TablesqaTestIcmpResultTable | not-accessible | current | sqa icmp result table |
| 1.3.6.1.4.1.3902.3.6000.132.10.1 | RowsqaTestIcmpResultEntry | not-accessible | current | sqa icmp result entry |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.1 | ColumnsqaTestIcmpResultTestNum | read-only | current | sqa icmp test num |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.2 | ColumnsqaTestIcmpResultRepeat | read-only | current | sqa icmp result repeat |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.3 | ColumnsqaTestIcmpResultResponse | read-only | current | sqa icmp result response |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.4 | ColumnsqaTestIcmpResultStatus | read-only | current | sqa icmp result status |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.5 | ColumnsqaTestIcmpResultDesIP | read-only | current | sqa icmp result des ip |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.6 | ColumnsqaTestIcmpResultMinRTT | read-only | current | sqa icmp result min rtt |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.7 | ColumnsqaTestIcmpResultMaxRTT | read-only | current | sqa icmp result max rtt |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.8 | ColumnsqaTestIcmpResultAvgRTT | read-only | current | sqa icmp result avg rtt |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.9 | ColumnsqaTestIcmpResultSumRTT | read-only | current | sqa icmp result sum rtt |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.10 | ColumnsqaTestIcmpResultProbeTime | read-only | current | sqa icmp result probe time |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.11 | ColumnsqaTestIcmpResultPacketLossRate | read-only | current | sqa icmp result packet loss rate |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.12 | ColumnsqaTestIcmpResultMinPosJitter | read-only | current | sqa icmp result min pos jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.13 | ColumnsqaTestIcmpResultMaxPosJitter | read-only | current | sqa icmp result max pos jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.14 | ColumnsqaTestIcmpResultAvgPosJitter | read-only | current | sqa icmp result avg pos jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.15 | ColumnsqaTestIcmpResultSumPosJitter | read-only | current | sqa icmp result sum pos jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.16 | ColumnsqaTestIcmpResultMinNegJitter | read-only | current | sqa icmp result min neg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.17 | ColumnsqaTestIcmpResultMaxNegJitter | read-only | current | sqa icmp result max neg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.18 | ColumnsqaTestIcmpResultAvgNegJitter | read-only | current | sqa icmp result avg neg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.19 | ColumnsqaTestIcmpResultSumNegJitter | read-only | current | sqa icmp result sum neg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.20 | ColumnsqaTestIcmpResultMinJitter | read-only | current | sqa icmp result min jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.21 | ColumnsqaTestIcmpResultMaxJitter | read-only | current | sqa icmp result max jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.22 | ColumnsqaTestIcmpResultAvgJitter | read-only | current | sqa icmp result avg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.10.1.23 | ColumnsqaTestIcmpResultSumJitter | read-only | current | sqa icmp result sum jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11 | TablesqaTestUdpResultTable | not-accessible | current | sqa udp result table |
| 1.3.6.1.4.1.3902.3.6000.132.11.1 | RowsqaTestUdpResultEntry | not-accessible | current | sqa udp result entry |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.1 | ColumnsqaTestUdpResultTestNum | read-only | current | sqa udp result test num |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.2 | ColumnsqaTestUdpResultRepeat | read-only | current | sqa udp result repeat |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.3 | ColumnsqaTestUdpResultResponse | read-only | current | sqa udp result response |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.4 | ColumnsqaTestUdpResultStatus | read-only | current | sqa udp result status |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.5 | ColumnsqaTestUdpResultDesIP | read-only | current | sqa udp result des ip |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.6 | ColumnsqaTestUdpResultMinRTT | read-only | current | sqa udp result min rtt |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.7 | ColumnsqaTestUdpResultMaxRTT | read-only | current | sqa udp result max rtt |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.8 | ColumnsqaTestUdpResultAvgRTT | read-only | current | sqa udp result avg rtt |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.9 | ColumnsqaTestUdpResultSumRTT | read-only | current | sqa udp result sum rtt |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.10 | ColumnsqaTestUdpResultMinPosJitter | read-only | current | sqa udp result min pos jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.11 | ColumnsqaTestUdpResultMaxPosJitter | read-only | current | sqa udp result max pos jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.12 | ColumnsqaTestUdpResultAvgPosJitter | read-only | current | sqa udp result avg pos jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.13 | ColumnsqaTestUdpResultSumPosJitter | read-only | current | sqa udp result sum pos jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.14 | ColumnsqaTestUdpResultMinNegJitter | read-only | current | sqa udp result min neg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.15 | ColumnsqaTestUdpResultMaxNegJitter | read-only | current | sqa udp result max neg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.16 | ColumnsqaTestUdpResultAvgNegJitter | read-only | current | sqa udp result avg neg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.17 | ColumnsqaTestUdpResultSumNegJitter | read-only | current | sqa udp result sum neg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.18 | ColumnsqaTestUdpResultProbeTime | read-only | current | sqa udp result probe time |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.19 | ColumnsqaTestUdpResultPacketLossRate | read-only | current | sqa udp result packet loss rate |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.20 | ColumnsqaTestUdpResultMinJitter | read-only | current | sqa udp result min jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.21 | ColumnsqaTestUdpResultMaxJitter | read-only | current | sqa udp result max jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.22 | ColumnsqaTestUdpResultAvgJitter | read-only | current | sqa udp result avg jitter |
| 1.3.6.1.4.1.3902.3.6000.132.11.1.23 | ColumnsqaTestUdpResultSumJitter | read-only | current | sqa udp result sum jitter |
| 1.3.6.1.4.1.3902.3.6000.132.12 | TablesqaTestTcpResultTable | not-accessible | current | sqa tcp result table |
| 1.3.6.1.4.1.3902.3.6000.132.12.1 | RowsqaTestTcpResultEntry | not-accessible | current | sqa tcp result entry |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.1 | ColumnsqaTestTcpResultTestNum | read-only | current | sqa tcp result test num |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.2 | ColumnsqaTestTcpResultRepeat | read-only | current | sqa tcp result repeat |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.3 | ColumnsqaTestTcpResultResponse | read-only | current | sqa tcp result response |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.4 | ColumnsqaTestTcpResultStatus | read-only | current | sqa tcp result status |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.5 | ColumnsqaTestTcpResultDesIP | read-only | current | sqa tcp result des ip |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.6 | ColumnsqaTestTcpResultMinRTT | read-only | current | sqa tcp result min rtt |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.7 | ColumnsqaTestTcpResultMaxRTT | read-only | current | sqa tcp result max rtt |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.8 | ColumnsqaTestTcpResultAvgRTT | read-only | current | sqa tcp result avg rtt |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.9 | ColumnsqaTestTcpResultSumRTT | read-only | current | sqa tcp result sum rtt |
| 1.3.6.1.4.1.3902.3.6000.132.12.1.10 | ColumnsqaTestTcpResultProbeTime | read-only | current | sqa tcp result probe time |
| 1.3.6.1.4.1.3902.3.6000.132.13 | TablesqaTestFtpResultTable | not-accessible | current | sqa ftp result table |
| 1.3.6.1.4.1.3902.3.6000.132.13.1 | RowsqaTestFtpResultEntry | not-accessible | current | sqa ftp result entry |
| 1.3.6.1.4.1.3902.3.6000.132.13.1.1 | ColumnsqaTestFtpResultTestNum | read-only | current | sqa ftp result test num |
| 1.3.6.1.4.1.3902.3.6000.132.13.1.2 | ColumnsqaTestFtpResultStatus | read-only | current | sqa ftp result test status |
| 1.3.6.1.4.1.3902.3.6000.132.13.1.3 | ColumnsqaTestFtpResultLastRTT | read-only | current | sqa ftp result last rtt |
| 1.3.6.1.4.1.3902.3.6000.132.13.1.4 | ColumnsqaTestFtpResultReadBytes | read-only | current | sqa ftp result read bytes |
| 1.3.6.1.4.1.3902.3.6000.132.13.1.5 | ColumnsqaTestFtpResultProbeTime | read-only | current | sqa ftp result probe time |
| 1.3.6.1.4.1.3902.3.6000.132.14 | TablesqaTestDnsResultTable | not-accessible | current | sqa dns result table |
| 1.3.6.1.4.1.3902.3.6000.132.14.1 | RowsqaTestDnsResultEntry | not-accessible | current | sqa dns result entry |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.1 | ColumnsqaTestDnsResultTestNum | read-only | current | sqa dns result test num |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.2 | ColumnsqaTestDnsResultRepeat | read-only | current | sqa dns result repeat |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.3 | ColumnsqaTestDnsResultResponse | read-only | current | sqa dns result response |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.4 | ColumnsqaTestDnsResultStatus | read-only | current | sqa dns result status |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.5 | ColumnsqaTestDnsResultResolvedIP | read-only | current | sqa dns result resolved ip |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.6 | ColumnsqaTestDnsResultMinRTT | read-only | current | sqa dns result min rtt |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.7 | ColumnsqaTestDnsResultMaxRTT | read-only | current | sqa dns result max rtt |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.8 | ColumnsqaTestDnsResultAvgRTT | read-only | current | sqa dns result avg rtt |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.9 | ColumnsqaTestDnsResultSumRTT | read-only | current | sqa dns result sum rtt |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.10 | ColumnsqaTestDnsResultProbeTime | read-only | current | sqa dns result probe time |
| 1.3.6.1.4.1.3902.3.6000.132.14.1.11 | ColumnsqaTestDnsResultDesurl | read-only | current | sqa dns result destination url |
| 1.3.6.1.4.1.3902.3.6000.132.15 | TablesqaTestUdpJitterResultTable | not-accessible | current | sqa udp jitter result table |
| 1.3.6.1.4.1.3902.3.6000.132.15.1 | RowsqaTestUdpJitterResultEntry | not-accessible | current | sqa udp jitter result entry |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.1 | ColumnsqaTestUdpJitterResultTestNum | read-only | current | sqa udp jitter result test num |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.2 | ColumnsqaTestUdpJitterResultRepeat | read-only | current | sqa udp jitter result repeat |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.3 | ColumnsqaTestUdpJitterResultResponse | read-only | current | sqa udp jitter result response |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.4 | ColumnsqaTestUdpJitterResultStatus | read-only | current | sqa udp jitter result status |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.5 | ColumnsqaTestUdpJitterResultDesIP | read-only | current | sqa udp jitter result des ip |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.6 | ColumnsqaTestUdpJitterResultMinRTTSD | read-only | current | sqa udp jitter result min rtt sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.7 | ColumnsqaTestUdpJitterResultMaxRTTSD | read-only | current | sqa udp jitter result max rtt sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.8 | ColumnsqaTestUdpJitterResultAvgRTTSD | read-only | current | sqa udp jitter result avg rtt sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.9 | ColumnsqaTestUdpJitterResultSumRTTSD | read-only | current | sqa udp jitter result sum rtt sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.10 | ColumnsqaTestUdpJitterResultMinRTTDS | read-only | current | sqa udp jitter result min rtt ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.11 | ColumnsqaTestUdpJitterResultMaxRTTDS | read-only | current | sqa udp jitter result max rtt ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.12 | ColumnsqaTestUdpJitterResultAvgRTTDS | read-only | current | sqa udp jitter result avg rtt ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.13 | ColumnsqaTestUdpJitterResultSumRTTDS | read-only | current | sqa udp jitter result sum rtt ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.14 | ColumnsqaTestUdpJitterResultMinPosSD | read-only | current | sqa udp jitter result min pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.15 | ColumnsqaTestUdpJitterResultMaxPosSD | read-only | current | sqa udp jitter result max pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.16 | ColumnsqaTestUdpJitterResultAvgPosSD | read-only | current | sqa udp jitter result avg pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.17 | ColumnsqaTestUdpJitterResultSumPosSD | read-only | current | sqa udp jitter result sum pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.18 | ColumnsqaTestUdpJitterResultNumPosSD | read-only | obsolete | sqa udp jitter result num pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.19 | ColumnsqaTestUdpJitterResultMinNegSD | read-only | current | sqa udp jitter result min neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.20 | ColumnsqaTestUdpJitterResultMaxNegSD | read-only | current | sqa udp jitter result max neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.21 | ColumnsqaTestUdpJitterResultAvgNegSD | read-only | current | sqa udp jitter result avg neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.22 | ColumnsqaTestUdpJitterResultSumNegSD | read-only | current | sqa udp jitter result sum neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.23 | ColumnsqaTestUdpJitterResultNumNegSD | read-only | obsolete | sqa udp jitter result num neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.24 | ColumnsqaTestUdpJitterResultMinPosDS | read-only | current | sqa udp jitter result min pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.25 | ColumnsqaTestUdpJitterResultMaxPosDS | read-only | current | sqa udp jitter result max pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.26 | ColumnsqaTestUdpJitterResultAvgPosDS | read-only | current | sqa udp jitter result avg pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.27 | ColumnsqaTestUdpJitterResultSumPosDS | read-only | current | sqa udp jitter result sum pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.28 | ColumnsqaTestUdpJitterResultNumPosDS | read-only | obsolete | sqa udp jitter result num pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.29 | ColumnsqaTestUdpJitterResultMinNegDS | read-only | current | sqa udp jitter result min neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.30 | ColumnsqaTestUdpJitterResultMaxNegDS | read-only | current | sqa udp jitter result max neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.31 | ColumnsqaTestUdpJitterResultAvgNegDS | read-only | current | sqa udp jitter result avg neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.32 | ColumnsqaTestUdpJitterResultSumNegDS | read-only | current | sqa udp jitter result sum neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.33 | ColumnsqaTestUdpJitterResultNumNegDS | read-only | obsolete | sqa udp jitter result num neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.34 | ColumnsqaTestUdpJitterResultDisposeNumSD | read-only | current | sqa udp jitter result dispose num sd |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.35 | ColumnsqaTestUdpJitterResultDisposeNumDS | read-only | current | sqa udp jitter result dispose num ds |
| 1.3.6.1.4.1.3902.3.6000.132.15.1.36 | ColumnsqaTestUdpJitterResultProbeTime | read-only | current | sqa udp jitterresult probe time |
| 1.3.6.1.4.1.3902.3.6000.132.16 | TablesqaTestSnmpResultTable | not-accessible | current | sqa snmp result table |
| 1.3.6.1.4.1.3902.3.6000.132.16.1 | RowsqaTestSnmpResultEntry | not-accessible | current | sqa snmp result entry |
| 1.3.6.1.4.1.3902.3.6000.132.16.1.1 | ColumnsqaTestSnmpResultTestNum | read-only | current | sqa snmp result test num |
| 1.3.6.1.4.1.3902.3.6000.132.16.1.2 | ColumnsqaTestSnmpResultStatus | read-only | current | sqa snmp result test status |
| 1.3.6.1.4.1.3902.3.6000.132.16.1.3 | ColumnsqaTestSnmpResultRTT | read-only | current | sqa snmp result last rtt |
| 1.3.6.1.4.1.3902.3.6000.132.16.1.4 | ColumnsqaTestSnmpResultProbeTime | read-only | current | sqa snmp result probe time |
| 1.3.6.1.4.1.3902.3.6000.132.17 | TablesqaTestHttpResultTable | not-accessible | current | sqa http result table |
| 1.3.6.1.4.1.3902.3.6000.132.17.1 | RowsqaTestHttpResultEntry | not-accessible | current | sqa http result entry |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.1 | ColumnsqaTestHttpResultTestNum | read-only | current | sqa http result test num |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.2 | ColumnsqaTestHttpResultRepeat | read-only | current | sqa http result repeat |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.3 | ColumnsqaTestHttpResultResponse | read-only | current | sqa http result response |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.4 | ColumnsqaTestHttpResultStatus | read-only | current | sqa http result status |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.5 | ColumnsqaTestHttpResultDesIP | read-only | current | sqa http result des ip |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.6 | ColumnsqaTestHttpResultDesurl | read-only | current | sqa http result destination url |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.7 | ColumnsqaTestHttpResultDNSMinRTT | read-only | current | sqa http result dns min rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.8 | ColumnsqaTestHttpResultDNSMaxRTT | read-only | current | sqa http result dns max rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.9 | ColumnsqaTestHttpResultDNSAvgRTT | read-only | current | sqa http result dns avg rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.10 | ColumnsqaTestHttpResultDNSSumRTT | read-only | current | sqa http result dns sum rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.11 | ColumnsqaTestHttpResultDNSNum | read-only | obsolete | sqa http result dns num |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.12 | ColumnsqaTestHttpResultTCPMinRTT | read-only | current | sqa http result tcp min rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.13 | ColumnsqaTestHttpResultTCPMaxRTT | read-only | current | sqa http result tcp max rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.14 | ColumnsqaTestHttpResultTCPAvgRTT | read-only | current | sqa http result tcp avg rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.15 | ColumnsqaTestHttpResultTCPSumRTT | read-only | current | sqa http result tcp sum rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.16 | ColumnsqaTestHttpResultTCPNum | read-only | obsolete | sqa http result tcp num |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.17 | ColumnsqaTestHttpResultHTTPMinRTT | read-only | current | sqa http result http min rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.18 | ColumnsqaTestHttpResultHTTPMaxRTT | read-only | current | sqa http result http max rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.19 | ColumnsqaTestHttpResultHTTPAvgRTT | read-only | current | sqa http result http avg rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.20 | ColumnsqaTestHttpResultHTTPSumRTT | read-only | current | sqa http result http sum rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.21 | ColumnsqaTestHttpResultHTTPNum | read-only | obsolete | sqa http result http num |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.22 | ColumnsqaTestHttpResultMinRTT | read-only | current | sqa http result min rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.23 | ColumnsqaTestHttpResultMaxRTT | read-only | current | sqa http result max rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.24 | ColumnsqaTestHttpResultAvgRTT | read-only | current | sqa http result avg rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.25 | ColumnsqaTestHttpResultSumRTT | read-only | current | sqa http result sum rtt |
| 1.3.6.1.4.1.3902.3.6000.132.17.1.26 | ColumnsqaTestHttpResultProbeTime | read-only | current | sqa http result probe time |
| 1.3.6.1.4.1.3902.3.6000.132.18 | TablesqaTestIcmpJitterResultTable | not-accessible | current | sqa icmp jitter result table |
| 1.3.6.1.4.1.3902.3.6000.132.18.1 | RowsqaTestIcmpJitterResultEntry | not-accessible | current | sqa icmp jitter result entry |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.1 | ColumnsqaTestIcmpJitterResultTestNum | read-only | current | sqa icmp jitter result test num |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.2 | ColumnsqaTestIcmpJitterResultRepeat | read-only | current | sqa icmp jitter result repeat |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.3 | ColumnsqaTestIcmpJitterResultResponse | read-only | current | sqa icmp jitter result response |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.4 | ColumnsqaTestIcmpJitterResultStatus | read-only | current | sqa icmp jitter result status |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.5 | ColumnsqaTestIcmpJitterResultDesIP | read-only | current | sqa icmp jitter result des ip |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.6 | ColumnsqaTestIcmpJitterResultMinRTTSD | read-only | current | sqa icmp jitter result min rtt sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.7 | ColumnsqaTestIcmpJitterResultMaxRTTSD | read-only | current | sqa icmp jitter result max rtt sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.8 | ColumnsqaTestIcmpJitterResultAvgRTTSD | read-only | current | sqa icmp jitter result avg rtt sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.9 | ColumnsqaTestIcmpJitterResultSumRTTSD | read-only | current | sqa icmp jitter result sum rtt sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.10 | ColumnsqaTestIcmpJitterResultMinRTTDS | read-only | current | sqa icmp jitter result min rtt ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.11 | ColumnsqaTestIcmpJitterResultMaxRTTDS | read-only | current | sqa udp jitter result max rtt ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.12 | ColumnsqaTestIcmpJitterResultAvgRTTDS | read-only | current | sqa icmp jitter result avg rtt ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.13 | ColumnsqaTestIcmpJitterResultSumRTTDS | read-only | current | sqa icmp jitter result sum rtt ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.14 | ColumnsqaTestIcmpJitterResultMinPosSD | read-only | current | sqa icmp jitter result min pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.15 | ColumnsqaTestIcmpJitterResultMaxPosSD | read-only | current | sqa icmp jitter result max pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.16 | ColumnsqaTestIcmpJitterResultAvgPosSD | read-only | current | sqa icmp jitter result avg pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.17 | ColumnsqaTestIcmpJitterResultSumPosSD | read-only | current | sqa icmp jitter result sum pos sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.18 | ColumnsqaTestIcmpJitterResultMinNegSD | read-only | current | sqa icmp jitter result min neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.19 | ColumnsqaTestIcmpJitterResultMaxNegSD | read-only | current | sqa icmp jitter result max neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.20 | ColumnsqaTestIcmpJitterResultAvgNegSD | read-only | current | sqa icmp jitter result avg neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.21 | ColumnsqaTestIcmpJitterResultSumNegSD | read-only | current | sqa icmp jitter result sum neg sd |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.22 | ColumnsqaTestIcmpJitterResultMinPosDS | read-only | current | sqa icmp jitter result min pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.23 | ColumnsqaTestIcmpJitterResultMaxPosDS | read-only | current | sqa icmp jitter result max pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.24 | ColumnsqaTestIcmpJitterResultAvgPosDS | read-only | current | sqa icmp jitter result avg pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.25 | ColumnsqaTestIcmpJitterResultSumPosDS | read-only | current | sqa icmp jitter result sum pos ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.26 | ColumnsqaTestIcmpJitterResultMinNegDS | read-only | current | sqa icmp jitter result min neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.27 | ColumnsqaTestIcmpJitterResultMaxNegDS | read-only | current | sqa icmp jitter result max neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.28 | ColumnsqaTestIcmpJitterResultAvgNegDS | read-only | current | sqa icmp jitter result avg neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.29 | ColumnsqaTestIcmpJitterResultSumNegDS | read-only | current | sqa icmp jitter result sum neg ds |
| 1.3.6.1.4.1.3902.3.6000.132.18.1.30 | ColumnsqaTestIcmpJitterResultProbeTime | read-only | current | sqa icmp jitterresult probe time |
| 1.3.6.1.4.1.3902.3.6000.132.19 | TablesqaTestSenderTable | not-accessible | current | sqa generalflow sender table |
| 1.3.6.1.4.1.3902.3.6000.132.19.1 | RowsqaTestSenderEntry | not-accessible | current | sqa generalflow sender entry |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.1 | ColumnsqaTestSenderTestNum | not-accessible | current | sqa sender test num. The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.2 | ColumnsqaTestSenderClientMode | read-only | current | sqa sender client mode, 1: l2-uni, 2: l3-uni, 3: l2-bridge-uni, 255: undefined(invalid) |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.3 | ColumnsqaTestSenderInboundInterface | read-only | current | sqa sender inbound interface |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.4 | ColumnsqaTestSenderTestMode | read-only | current | sqa sender test mode, 1: share-mode(default), 2: exclusive-mode |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.5 | ColumnsqaTestSenderDisNonTest8021p | read-only | current | sqa sender disNonTest8021p, 255: undefined(invalid) |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.6 | ColumnsqaTestSenderDisNonTestDscp | read-only | current | sqa sender disNonTestDscp, 255: undefined(invalid) |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.7 | ColumnsqaTestSenderReflectorMode | read-only | current | sqa sender reflector mode, 1:l1, 2:l2, 3:l3, 4:l4, 5:default |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.8 | ColumnsqaTestSenderSourceMac | read-only | current | sqa sender source mac |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.9 | ColumnsqaTestSenderDestinationMac | read-only | current | sqa sender destination mac |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.10 | ColumnsqaTestSenderSourceIp | read-only | current | sqa sender source ip |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.11 | ColumnsqaTestSenderDestinationIp | read-only | current | sqa sender destination ip |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.12 | ColumnsqaTestSenderVlanId | read-only | current | sqa sender vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.13 | ColumnsqaTestSenderInVlanId | read-only | current | sqa sender internal vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.14 | ColumnsqaTestSenderExVlanId | read-only | current | sqa sender external vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.15 | ColumnsqaTestSenderPriority8021p | read-only | current | sqa sender priority8021p, default: 0 |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.16 | ColumnsqaTestSenderDscp | read-only | current | sqa sender dscp, default: 0 |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.17 | ColumnsqaTestSenderTpEnable | read-only | current | sqa sender throughput enable |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.18 | ColumnsqaTestSenderTpRateType | read-only | current | sqa sender throughput rate type, 1: ir(default), 2: ulr |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.19 | ColumnsqaTestSenderTpHighRate | read-only | current | sqa sender throughput high rate, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.20 | ColumnsqaTestSenderTpLowRate | read-only | current | sqa sender throughput low rate, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.21 | ColumnsqaTestSenderTpTimeOut | read-only | current | sqa sender throughput timeout, default: 4s, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.22 | ColumnsqaTestSenderTpOneRateDuration | read-only | current | sqa sender throughput one rate duration, default: 4s, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.23 | ColumnsqaTestSenderTpDuration | read-only | current | sqa sender throughput duration, 0: undefined(invalid), unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.24 | ColumnsqaTestSenderTpPrecision | read-only | current | sqa sender throughput precision, default: 1000kbps, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.25 | ColumnsqaTestSenderTpLossThreshold | read-only | current | sqa sender throughput loss threshold, default: 0, unit : 1/10000 |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.26 | ColumnsqaTestSenderLossEnable | read-only | current | sqa sender loss enable |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.27 | ColumnsqaTestSenderLossRateType | read-only | current | sqa sender loss rate type, 1: ir(default), 2: ulr |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.28 | ColumnsqaTestSenderLossRate | read-only | current | sqa sender loss rate, default: 1000kbps, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.29 | ColumnsqaTestSenderLossTimeOut | read-only | current | sqa sender loss timeout, default: 4s, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.30 | ColumnsqaTestSenderLossDuration | read-only | current | sqa sender loss duration, default: 60s, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.31 | ColumnsqaTestSenderLossRatioThreshold | read-only | current | sqa sender loss ratio threshold, default: 0, unit : 1/10000 |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.32 | ColumnsqaTestSenderDelayEnable | read-only | current | sqa sender delay enable |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.33 | ColumnsqaTestSenderDelayRateType | read-only | current | sqa sender delay rate type, 1: ir(default), 2: ulr |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.34 | ColumnsqaTestSenderDelayRate | read-only | current | sqa sender delay rate, default: 1000kbps, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.35 | ColumnsqaTestSenderDelayInterval | read-only | current | sqa sender delay interval, default: 4s, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.36 | ColumnsqaTestSenderDelayDuration | read-only | current | sqa sender delay duration, default: 60s, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.37 | ColumnsqaTestSenderDelayThreshold | read-only | current | sqa sender delay threshold, default: 20000ns, unit : us |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.38 | ColumnsqaTestSenderJitterThreshold | read-only | current | sqa sender jitter threshold, default: 25000ns, unit : us |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.39 | ColumnsqaTestSenderPacketSize1 | read-only | current | sqa sender packet size1, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.40 | ColumnsqaTestSenderPacketSize2 | read-only | current | sqa sender packet size2, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.41 | ColumnsqaTestSenderPacketSize3 | read-only | current | sqa sender packet size3, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.42 | ColumnsqaTestSenderPacketSize4 | read-only | current | sqa sender packet size4, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.43 | ColumnsqaTestSenderPacketSize5 | read-only | current | sqa sender packet size5, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.44 | ColumnsqaTestSenderPacketSize6 | read-only | current | sqa sender packet size6, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.45 | ColumnsqaTestSenderPacketSize7 | read-only | current | sqa sender packet size7, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.46 | ColumnsqaTestSenderOnlineOfflineFlag | read-only | current | sqa sender online offline flag, 1: online, 2: offline |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.47 | ColumnsqaTestSenderFreeArpEnable | read-only | current | sqa sender free arp enable |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.48 | ColumnsqaTestSenderFreeArpInterval | read-only | current | sqa sender free arp interval, default: 30s, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.19.1.49 | ColumnsqaTestSenderTimeRange | read-only | current | sqa sender timerange |
| 1.3.6.1.4.1.3902.3.6000.132.20 | TablesqaTestReflectorTable | not-accessible | current | sqa generalflow reflector table |
| 1.3.6.1.4.1.3902.3.6000.132.20.1 | RowsqaTestReflectorEntry | not-accessible | current | sqa generalflow reflector entry |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.1 | ColumnsqaTestReflectorId | not-accessible | current | sqa reflector ID |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.2 | ColumnsqaTestReflectorRefMode | read-only | current | sqa reflector mode, 1: l2, 2: l3 |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.3 | ColumnsqaTestReflectorInterface | read-only | current | sqa reflector inbound interface |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.4 | ColumnsqaTestReflectorTestMode | read-only | current | sqa reflector test mode, 1: share-mode(default), 2: exclusive-mode |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.5 | ColumnsqaTestReflectorDisNonTest8021p | read-only | current | sqa reflector disNonTest8021p, 255: undefined(invalid) |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.6 | ColumnsqaTestReflectorDisNonTestDscp | read-only | current | sqa reflector disNonTestDscp, 255: undefined(invalid) |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.7 | ColumnsqaTestReflectorAgeingTime | read-only | current | sqa reflector ageing time, 0 : continuous |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.8 | ColumnsqaTestReflectorSourceMac | read-only | current | sqa reflector source mac |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.9 | ColumnsqaTestReflectorDestinationMac | read-only | current | sqa reflector destination mac |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.10 | ColumnsqaTestReflectorSourceIp | read-only | current | sqa reflector source ip |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.11 | ColumnsqaTestReflectorDestinationIp | read-only | current | sqa reflector destination ip |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.12 | ColumnsqaTestReflectorSourcePort | read-only | current | sqa reflector source port, default: 49184 |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.13 | ColumnsqaTestReflectorDestinationPort | read-only | current | sqa reflector destination port, default: 7 |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.14 | ColumnsqaTestReflectorVlanId | read-only | current | sqa reflector vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.15 | ColumnsqaTestReflectorInternalVlanId | read-only | current | sqa reflector internal vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.16 | ColumnsqaTestReflectorExternalVlanId | read-only | current | sqa reflector external vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.17 | ColumnsqaTestReflectorPriority8021p | read-only | current | sqa reflector priority8021p, 255: undefined(invalid) |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.18 | ColumnsqaTestReflectorDscp | read-only | current | sqa reflector DSCP, 255: undefined(invalid) |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.19 | ColumnsqaTestReflectorOnOfflineFlag | read-only | current | sqa reflector online flag, 1: online, 2: offline |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.20 | ColumnsqaTestReflectorFreeArpEnable | read-only | current | sqa reflector free arp enable state |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.21 | ColumnsqaTestReflectorFreeArpIp | read-only | current | sqa reflector free arp local ip address |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.22 | ColumnsqaTestReflectorFreeArpVlanId | read-only | current | sqa reflector free arp vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.23 | ColumnsqaTestReflectorFreeArpInVlanId | read-only | current | sqa reflector free arp internal vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.24 | ColumnsqaTestReflectorFreeArpExVlanId | read-only | current | sqa reflector free arp external vlan id |
| 1.3.6.1.4.1.3902.3.6000.132.20.1.25 | ColumnsqaTestReflectorFreeArpInterval | read-only | current | sqa reflector free arp send interval, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.21 | TablesqaTestTpResultTable | not-accessible | current | sqa generalflow throughput test result table |
| 1.3.6.1.4.1.3902.3.6000.132.21.1 | RowsqaTestTpResultEntry | not-accessible | current | sqa generalflow throughput test result entry |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.1 | ColumnsqaTestTpResultTestNum | not-accessible | current | sqa generalflow throughput test number |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.2 | ColumnsqaTestTpResultPacketSize | not-accessible | current | sqa generalflow throughput test packet size, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.3 | ColumnsqaTestTpResultUniInterface | read-only | current | sqa generalflow throughput test UNI interface |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.4 | ColumnsqaTestTpResultPriority8021p | read-only | current | sqa generalflow throughput test result test priority 8021p |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.5 | ColumnsqaTestTpResultDscp | read-only | current | sqa generalflow throughput test result test dscp |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.6 | ColumnsqaTestTpResultPrecision | read-only | current | sqa generalflow throughput test result precision, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.7 | ColumnsqaTestTpResultTp | read-only | current | sqa generalflow throughput test Throughput, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.8 | ColumnsqaTestTpResultInfoRate | read-only | current | sqa generalflow throughput test result info rate, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.9 | ColumnsqaTestTpResultLossRatio | read-only | current | sqa generalflow throughput test result loss ratio, unit : 1/10000 |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.10 | ColumnsqaTestTpResultTestDuration | read-only | current | sqa generalflow throughput test duration, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.21.1.11 | ColumnsqaTestTpResultStatus | read-only | current | sqa generalflow throughput test status |
| 1.3.6.1.4.1.3902.3.6000.132.22 | TablesqaTestLossResultTable | not-accessible | current | sqa generalflow loss test result table |
| 1.3.6.1.4.1.3902.3.6000.132.22.1 | RowsqaTestLossResultEntry | not-accessible | current | sqa generalflow loss test result entry |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.1 | ColumnsqaTestLossResultTestNum | not-accessible | current | sqa generalflow loss test number |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.2 | ColumnsqaTestLossResultPacketSize | not-accessible | current | sqa generalflow loss test packet size, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.3 | ColumnsqaTestLossResultUniInterface | read-only | current | sqa generalflow loss test UNI interface |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.4 | ColumnsqaTestLossResultPriority8021p | read-only | current | sqa generalflow loss test result test priority 8021p |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.5 | ColumnsqaTestLossResultDscp | read-only | current | sqa generalflow loss test result test dscp |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.6 | ColumnsqaTestLossResultTestRate | read-only | current | sqa generalflow loss test result test rate, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.7 | ColumnsqaTestLossResultLossPktNumber | read-only | current | sqa generalflow loss test loss packet number |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.8 | ColumnsqaTestLossResultLossPktRatio | read-only | current | sqa generalflow loss test result loss packet ratio, unit : 1/10000 |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.9 | ColumnsqaTestLossResultTestDuration | read-only | current | sqa generalflow loss test result duration, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.22.1.10 | ColumnsqaTestLossResultStatus | read-only | current | sqa generalflow loss test status |
| 1.3.6.1.4.1.3902.3.6000.132.23 | TablesqaTestDelayResultTable | not-accessible | current | sqa generalflow delay test result table |
| 1.3.6.1.4.1.3902.3.6000.132.23.1 | RowsqaTestDelayResultEntry | not-accessible | current | sqa generalflow delay test result entry |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.1 | ColumnsqaTestDelayResultTestNum | not-accessible | current | sqa generalflow delay test number |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.2 | ColumnsqaTestDelayResultPacketSize | not-accessible | current | sqa generalflow delay test packet size, unit : byte |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.3 | ColumnsqaTestDelayResultUniInterface | read-only | current | sqa generalflow delay test UNI interface |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.4 | ColumnsqaTestDelayResultPriority8021p | read-only | current | sqa generalflow delay test result test priority 8021p |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.5 | ColumnsqaTestDelayResultDscp | read-only | current | sqa generalflow delay test result test dscp |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.6 | ColumnsqaTestDelayResultTestRate | read-only | current | sqa generalflow delay test result test rate, unit : kbps |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.7 | ColumnsqaTestDelayResultMinDelay | read-only | current | sqa generalflow delay test result min delay, unit : us |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.8 | ColumnsqaTestDelayResultMaxDelay | read-only | current | sqa generalflow delay test result max delay, unit : us |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.9 | ColumnsqaTestDelayResultAvgDelay | read-only | current | sqa generalflow delay test result avg delay, unit : us |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.10 | ColumnsqaTestDelayResultMinJitter | read-only | current | sqa generalflow delay test result min jitter, unit : us |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.11 | ColumnsqaTestDelayResultMaxJitter | read-only | current | sqa generalflow delay test result max jitter, unit : us |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.12 | ColumnsqaTestDelayResultAvgJitter | read-only | current | sqa generalflow delay test result avg jitter, unit : us |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.13 | ColumnsqaTestDelayResultTestDuration | read-only | current | sqa generalflow delay test result duration, unit : s |
| 1.3.6.1.4.1.3902.3.6000.132.23.1.14 | ColumnsqaTestDelayResultStatus | read-only | current | sqa generalflow delay test status |
| 1.3.6.1.4.1.3902.3.6000.132.24 | Nodezxr10SqaNotifications | |||
| 1.3.6.1.4.1.3902.3.6000.132.24.1 | Notificationzxr10SqaTestGeneralFlowFinish | current | ||
| 1.3.6.1.4.1.3902.3.6000.132.24.2 | Notificationzxr10SqaTestGeneralFlowFail | current | ||
| 1.3.6.1.4.1.3902.3.6000.132.25 | TablesqaTestOperationTable | not-accessible | current | SQA test operation configuration |
| 1.3.6.1.4.1.3902.3.6000.132.25.1 | RowsqaTestOperationEntry | not-accessible | current | SQA test operation entity configuration table |
| 1.3.6.1.4.1.3902.3.6000.132.25.1.1 | ColumnsqaOperationTestNum | not-accessible | current | SQA test number.The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.132.25.1.2 | ColumnsqaTestOperation | read-create | current | SQA test operation type,1 means begin,2 means stop. |
| 1.3.6.1.4.1.3902.3.6000.132.26 | TablesqaUdpTestTable | not-accessible | current | SQA UDP test entity configuration |
| 1.3.6.1.4.1.3902.3.6000.132.26.1 | RowsqaUdpTestEntry | not-accessible | current | SQA UDP test entity configuration table |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.1 | ColumnsqaUdpTestNum | not-accessible | current | SQA test number.The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.2 | ColumnsqaUdpTestVrf | read-create | current | The name of VRF,this string length ranges from 1 to 32. |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.3 | ColumnsqaUdpTestDesIP | read-create | current | The destination IP address. |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.4 | ColumnsqaUdpTestDesPort | read-create | current | The destination port number,ranges from 1025 to 65535. |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.5 | ColumnsqaUdpTestRepeat | read-create | current | The number of repeat times,ranges from 1 to 1000(default:1). |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.6 | ColumnsqaUdpTestSize | read-create | current | The size of UDP packet,ranges from 50 to 1500(default:50),unit:byte. |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.7 | ColumnsqaUdpTestTos | read-create | current | The TOS value,ranges from 0 to 255(default:0). |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.8 | ColumnsqaUdpTestInterval | read-create | current | The sending period of UDP packets,ranges from 50 to 2000(default:100),unit:ms. |
| 1.3.6.1.4.1.3902.3.6000.132.26.1.9 | ColumnsqaUdpTestRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.132.27 | TablesqaUdpJitterTestTable | not-accessible | current | SQA UDP test entity configuration |
| 1.3.6.1.4.1.3902.3.6000.132.27.1 | RowsqaUdpJitterTestEntry | not-accessible | current | SQA UDP jitter test entity configuration table |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.1 | ColumnsqaUdpJitterTestNum | not-accessible | current | SQA test number.The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.2 | ColumnsqaUdpJitterTestVrf | read-create | current | The name of VRF,this string length ranges from 1 to 32. |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.3 | ColumnsqaUdpJitterTestDesIP | read-create | current | The destination IP address. |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.4 | ColumnsqaUdpJitterTestDesPort | read-create | current | The destination port number,ranges from 1025 to 65535. |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.5 | ColumnsqaUdpJitterTestRepeat | read-create | current | The number of repeat times,ranges from 1 to 1000(default:1). |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.6 | ColumnsqaUdpJitterTestSize | read-create | current | The size of UDP packet,ranges from 50 to 1500(default:50),unit:byte. |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.7 | ColumnsqaUdpJitterTestTos | read-create | current | The TOS value,ranges from 0 to 255(default:0). |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.8 | ColumnsqaUdpJitterTestInterval | read-create | current | The sending period of UDP packets,ranges from 50 to 2000(default:100),unit:ms. |
| 1.3.6.1.4.1.3902.3.6000.132.27.1.9 | ColumnsqaUdpJitterTestRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.132.28 | TablesqaIcmpTestTable | not-accessible | current | SQA ICMP test entity configuration |
| 1.3.6.1.4.1.3902.3.6000.132.28.1 | RowsqaIcmpTestEntry | not-accessible | current | SQA ICMP test entity configuration table |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.1 | ColumnsqaIcmpTestNum | not-accessible | current | SQA test number.The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.2 | ColumnsqaIcmpTestVrf | read-create | current | The name of VRF,this string length ranges from 1 to 32. |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.3 | ColumnsqaIcmpTestDesIP | read-create | current | The destination IP address. |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.4 | ColumnsqaIcmpTestSorceIP | read-create | current | The Source IP address. |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.5 | ColumnsqaIcmpTestRepeat | read-create | current | The number of repeat times,ranges from 1 to 65535(default:1). |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.6 | ColumnsqaIcmpTestSize | read-create | current | The size of ICMP packet,ranges from 36 to 8192(default:36),unit:byte. |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.7 | ColumnsqaIcmpTestTos | read-create | current | The TOS value,ranges from 0 to 255(default:0),256 is the invalid value. |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.8 | ColumnsqaIcmpTestTtl | read-create | current | The TTL value,ranges from 1 to 255(default:255). |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.9 | ColumnsqaIcmpTestInterval | read-create | current | The sending period of ICMP packets,ranges from 50 to 65535(default:100),unit:ms. |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.10 | ColumnsqaIcmpTestDscp | read-create | current | The DSCP value,ranges from 0 to 63,255 is the invalid value. |
| 1.3.6.1.4.1.3902.3.6000.132.28.1.11 | ColumnsqaIcmpTestRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.132.29 | TablesqaIcmpJitterTestTable | not-accessible | current | SQA ICMP jitter test entity configuration |
| 1.3.6.1.4.1.3902.3.6000.132.29.1 | RowsqaIcmpJitterTestEntry | not-accessible | current | SQA ICMP jitter test entity configuration table |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.1 | ColumnsqaIcmpJitterTestNum | not-accessible | current | SQA test number.The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.2 | ColumnsqaIcmpJitterTestVrf | read-create | current | The name of VRF,this string length ranges from 1 to 32. |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.3 | ColumnsqaIcmpJitterTestDesIP | read-create | current | The destination IP address. |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.4 | ColumnsqaIcmpJitterTestSorceIP | read-create | current | The Source IP address. |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.5 | ColumnsqaIcmpJitterTestRepeat | read-create | current | The number of repeat times,ranges from 1 to 65535(default:1). |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.6 | ColumnsqaIcmpJitterTestSize | read-create | current | The size of ICMP packet,ranges from 40 to 8192(default:40),unit:byte. |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.7 | ColumnsqaIcmpJitterTestTos | read-create | current | The TOS value,ranges from 0 to 255(default:0),256 is the invalid value. |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.8 | ColumnsqaIcmpJitterTestTtl | read-create | current | The TTL value,ranges from 1 to 255(default:255). |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.9 | ColumnsqaIcmpJitterTestInterval | read-create | current | The sending period of ICMP packets,ranges from 50 to 65535(default:100),unit:ms. |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.10 | ColumnsqaIcmpJitterTestDscp | read-create | current | The DSCP value,ranges from 0 to 63,255 is the invalid value. |
| 1.3.6.1.4.1.3902.3.6000.132.29.1.11 | ColumnsqaIcmpJitterTestRowStatus | read-create | current | Row status |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ReflectorMode | INTEGER { l2(1), l3(2) } | current | sqa reflector mode |
| TestClientMode | INTEGER { uni-12(1), uni-13(2), bridge-uni-12(3), undefined(255) } | current | sqa test client mode |
| TestEnableStatus | INTEGER { enable(1), disable(2) } | current | sqa test enable status |
| TestOnlineState | INTEGER { online(1), offline(2) } | current | sqa test online state |
| TestOperation | INTEGER { begin(1), stop(2) } | current | sqa test operation |
| TestRateType | INTEGER { ir(1), ulr(2) } | current | sqa test rate type |
| TestReflectorMode | INTEGER { l1(1), l2(2), l3(3), l4(4), default(5) } | current | sqa test reflector mode |
| TestResultStatus | INTEGER { sqaSuccessEnd(1), sqaErrorEnd(2) } | current | sqa test result status |
| TestStatus | INTEGER { sqaIdle(1), sqaWaitingFirst(2), sqaWaitingNext(3), sqaWaitingResult(4), sqaSuccessEnd(5), sqaErrorEnd(6), sqaIpstackErrorEnd(7), sqaPauseEnd(8), sqaEntityBusy(9), sqaWaitingTimerange(10), sqaWaitingIpstackUpcall(11), sqaWaitingConfig(12), sqaFinished(13), sqaRunning(14) } | current | sqa test status |
| TestTestMode | INTEGER { share-mode(1), exclusive-mode(2) } | current | sqa test test mode |
| TestTrapOnOff | INTEGER { on(1), off(2) } | current | sqa test trap enable or disable |
| TestType | INTEGER { icmp(1), tcp(2), udp(3), ftp(4), dns(5), udpjitter(6), http(7), snmp(8), icmpjitter(9) } | current | sqa test type |
| TpResultStatus | INTEGER { pass(1), durationTimeout(2), lowRateConfigError(3) } | current | sqa throughputtest test result status,durationTimeout: Could not find throughtput in the specified time,lowRateConfigError: Configuration of the lowest rate can not meet the requirements of packet loss rate |