ZXR10-VoIP
274 objects
ZXROS v4.8.01 VoIP MIB
Imported Objects
| RFC1155-SMI | IpAddress |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| ZXR10-SMI | voip |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.200.1 | IdentityvoipMIB | ZXROS v4.8.01 VoIP MIB | ||
| 1.3.6.1.4.1.3902.3.200.1.1 | NodevoipMibObjects | |||
| 1.3.6.1.4.1.3902.3.200.1.1.1 | NodevoipDialpeer | |||
| 1.3.6.1.4.1.3902.3.200.1.1.1.1 | TablevoipDialpeerTable | not-accessible | current | Configure voipDialpeer parameters, such as signals's voipDialpeerNumber... |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1 | RowvoipDialpeerEntry | not-accessible | current | Each row INDEX by voipDialpeerNumber And contain imformation of Dialpeer. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.1 | ColumnvoipDialpeerNumber | read-only | current | Configure voip Dialpeer number. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.2 | ColumnvoipDialpeerType | read-only | current | Configure voip Dialpeer type. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.3 | ColumnvoipDialpeerState | read-write | current | Configure voip Dialpeer state. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.4 | ColumnvoipDialpeerCorrespondingPhoneNumber | read-write | current | Configure voip Dialpeer phcodestring. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.5 | ColumnvoipDialpeerPotsPortName | read-write | current | Configure voip Pots Dialpeer port name. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.6 | ColumnvoipDialpeerPotsIfDigitStrip | read-write | current | Configure voip Pots Dialpeer if allow to digit strip. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.7 | ColumnvoipDialpeerPotsPrefix | read-write | current | Configure voip Pots Dialpeer prefix. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.8 | ColumnvoipDialpeerPotsCalleridClassNo | read-write | current | Configure zxr10 voip Dialpeer Pots Callerid ClassNo. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.11 | ColumnvoipDialpeerVoipVoiceClassNo | read-write | current | Configure zxr10 VoIP Dialpeer Voip VoiceClassNo. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.12 | ColumnvoipDialpeerVoipTargetType | read-write | current | Configure zxr10 VoIP Dialpeer Voip Target Type. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.13 | ColumnvoipDialpeerVoipPeerAddr | read-write | current | Configure zxr10 VoIP Dialpeer Voip Peer Addr. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.14 | ColumnvoipDialpeerVoipIpPrecedence | read-write | current | Configure voip Voip Dialpeer ip packet precdence. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.15 | ColumnvoipDialpeerFaxClassNo | read-write | current | Configure zxr10 VoIP Dialpeer Fax Class No. |
| 1.3.6.1.4.1.3902.3.200.1.1.1.1.1.16 | ColumnvoipDialpeerRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.2 | NodevoipFax | |||
| 1.3.6.1.4.1.3902.3.200.1.1.2.1 | TablevoipFaxTable | not-accessible | current | Configure voip Voice parameters, such as signals's voipDialpeerFaxIfEcm... |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1 | RowvoipFaxEntry | not-accessible | current | Each row INDEX by voipFaxNo And contain imformation of VoIP Fax. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.1 | ColumnvoipFaxClassNo | read-only | current | Configure zxr10 VoIP Fax No. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.2 | ColumnvoipFaxIfEcm | read-write | current | Configure voip If Ecm. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.3 | ColumnvoipFaxRate | read-write | current | Configure voip Rate. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.4 | ColumnvoipFaxProtocolType | read-write | current | Configure voip Type. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.5 | ColumnvoipFaxRecoveryMethod | read-write | current | Configure zxr10 VoIP Fax Recovery Method. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.6 | ColumnvoipFaxLossPacketHandle | read-write | current | Configure zxr10 VoIP Fax Loss Packet Handle Method. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.7 | ColumnvoipFaxEnergyLevel | read-write | current | Configure zxr10 VoIP Fax Energy Level. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.9 | ColumnvoipFaxLsRedundancy | read-write | current | Configure voip Is Redundancy. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.10 | ColumnvoipFaxHsRedundancy | read-write | current | Configure voip Hs Redundancy. |
| 1.3.6.1.4.1.3902.3.200.1.1.2.1.1.11 | ColumnvoipFaxRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.3 | NodevoipVoice | |||
| 1.3.6.1.4.1.3902.3.200.1.1.3.1 | TablevoipVoiceTable | not-accessible | current | Configure voip Voice parameters, such as signals's voipVoiceClassNo... |
| 1.3.6.1.4.1.3902.3.200.1.1.3.1.1 | RowvoipVoiceEntry | not-accessible | current | Each row INDEX by voipVoiceClassNo And contain imformation of VoIPVoice. |
| 1.3.6.1.4.1.3902.3.200.1.1.3.1.1.1 | ColumnvoipVoiceClassNo | read-only | current | Configure voip Voice Class No. |
| 1.3.6.1.4.1.3902.3.200.1.1.3.1.1.2 | ColumnvoipVoiceH323ClassNo | read-write | current | Configure voip Voice H323 Class No. |
| 1.3.6.1.4.1.3902.3.200.1.1.3.1.1.3 | ColumnvoipVoiceCodecClassNo | read-write | current | Configure voip Voice Codec Class No. |
| 1.3.6.1.4.1.3902.3.200.1.1.3.1.1.4 | ColumnvoipVoiceRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.4 | NodevoipH323 | |||
| 1.3.6.1.4.1.3902.3.200.1.1.4.1 | TablevoipH323Table | not-accessible | current | Configure voip Voice parameters, such as signals's voipH323ClassNo... |
| 1.3.6.1.4.1.3902.3.200.1.1.4.1.1 | RowvoipH323Entry | not-accessible | current | Each row INDEX by voipVoiceClassNo And contain imformation of voipH323. |
| 1.3.6.1.4.1.3902.3.200.1.1.4.1.1.1 | ColumnvoipH323ClassNo | read-only | current | Configure voip H323 Class No. |
| 1.3.6.1.4.1.3902.3.200.1.1.4.1.1.2 | ColumnvoipH323IfFastcon | read-write | current | Configure voip H323 If Fastcon. |
| 1.3.6.1.4.1.3902.3.200.1.1.4.1.1.5 | ColumnvoipH323H225TimeoutSetup | read-write | current | Configure voip H323 H225 Timeout Setup. |
| 1.3.6.1.4.1.3902.3.200.1.1.4.1.1.6 | ColumnvoipH323H225TimeoutTcpCallIdle | read-write | current | Configure voip H323 H225 Timeout Tcp Call idle. |
| 1.3.6.1.4.1.3902.3.200.1.1.4.1.1.7 | ColumnvoipH323H225TimeoutTcpEstablish | read-write | current | Configure voip H323 H225 Timeout Tcp Establish. |
| 1.3.6.1.4.1.3902.3.200.1.1.4.1.1.8 | ColumnvoipH323RowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.5 | NodevoipCodec | |||
| 1.3.6.1.4.1.3902.3.200.1.1.5.1 | TablevoipCodecTable | not-accessible | current | Configure voip Codec parameters, such as signals's voipCodecNo... |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1 | RowvoipCodecEntry | not-accessible | current | Each row INDEX by voipCodecClassNo And contain imformation of voipCodec. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.1 | ColumnvoipCodecClassNo | read-only | current | Configure voip Codec Class No. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.2 | ColumnvoipCodecClass1stPriLevel | read-write | current | Configure Codec Class 1st Priority Level. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.3 | ColumnvoipCodecClass2ndPriLevel | read-write | current | Configure Codec Class 2nd Priority Level. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.4 | ColumnvoipCodecClass3rdPriLevel | read-write | current | Configure Codec Class 3rd Priority Level. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.5 | ColumnvoipCodecClass4thPriLevel | read-write | current | Configure Codec Class 4th Priority Level. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.6 | ColumnvoipCodecClass5thPriLevel | read-write | current | Configure Codec Class 5th Priority Level. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.7 | ColumnvoipCodecClass6thPriLevel | read-write | current | Configure Codec Class 6th Priority Level. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.8 | ColumnvoipCodecClass7thPriLevel | read-write | current | Configure Codec Class 7th Priority Level. |
| 1.3.6.1.4.1.3902.3.200.1.1.5.1.1.9 | ColumnvoipCodecRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.6 | NodevoipService | |||
| 1.3.6.1.4.1.3902.3.200.1.1.6.1 | ScalarvoipServiceCallingAddr | read-write | current | Configure voip Service Calling Addr. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.2 | ScalarvoipServiceH225RasAddr | read-write | current | Configure voip Service H225 Ras Addr. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.4 | ScalarvoipServiceCallingPort | read-write | current | Configure voip Service Calling port. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.5 | ScalarvoipServiceH225RasPort | read-write | current | Configure voip Service H225 Ras Port. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.7 | ScalarvoipServiceIfRrqPrefix | read-write | current | Configure voip Service If Rrq Prefix. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.8 | ScalarvoipServiceGwAlias | read-write | current | Configure zxr10 VoIP Service Gw Alias. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.9 | ScalarvoipServiceH323Desc | read-write | current | Configure zxr10 VoIP Service Gw Alias. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.16 | ScalarvoipServiceArqRetransfer | read-write | current | Configure voip Service Arq Retransfer. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.17 | ScalarvoipServiceBrqRetransfer | read-write | current | Configure voip Service Brq Retransfer. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.18 | ScalarvoipServiceDrqRetransfer | read-write | current | Configure voip Service Drq Retransfer. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.19 | ScalarvoipServiceGrqRetransfer | read-write | current | Configure voip Service Grq Retransfer. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.20 | ScalarvoipServiceLrqRetransfer | read-write | current | Configure zxr10 VoIP Service Lrq Retransfer. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.21 | ScalarvoipServiceRaiRetransfer | read-write | current | Configure voip Service Rai Retransfer. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.22 | ScalarvoipServiceRrqRetransfer | read-write | current | Configure voip Service Rrq Retransfer. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.23 | ScalarvoipServiceUrqRetransfer | read-write | current | Configure zxr10 VoIP Service Urq Retransfer. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.25 | ScalarvoipServiceArqTimeout | read-write | current | Configure voip Service Arq Timeout. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.26 | ScalarvoipServiceBrqTimeout | read-write | current | Configure voip Service Brq Timeout. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.27 | ScalarvoipServiceDrqTimeout | read-write | current | Configure voip Service Drq Timeout. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.28 | ScalarvoipServiceGrqTimeout | read-write | current | Configure voip Service Grq Timeout. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.29 | ScalarvoipServiceLrqTimeout | read-write | current | Configure zxr10 VoIP Service Lrq Timeout. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.30 | ScalarvoipServiceRaiTimeout | read-write | current | Configure voip Service Rai Timeout. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.31 | ScalarvoipServiceRrqTimeout | read-write | current | Configure voip Service Rrq Timeout. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.32 | ScalarvoipServiceUrqTimeout | read-write | current | Configure zxr10 VoIP Service Urq Timeout. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.33 | TablevoipServiceGwTechPrefixTable | not-accessible | current | Configure voipServiceGwTechPrefix parameters, such as voipPhcodestring... |
| 1.3.6.1.4.1.3902.3.200.1.1.6.33.1 | RowvoipServiceGwTechPrefixEntry | not-accessible | current | Each row INDEX by voipServiceGwIndex And contain imformation of VoIPServiceGwTechPrefix. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.33.1.1 | ColumnvoipServiceGwIndex | read-only | current | Configure zxr10 VoIP Service Gw Index. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.33.1.2 | ColumnvoipServiceGwTechPrefix | read-write | current | Configure voip Service Gw Prefix. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.33.1.3 | ColumnvoipServiceGwTechPrefixRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34 | TablevoipServiceGkTable | not-accessible | current | Configure VoIP Service Gk parameters, such as voipServiceGkName... |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34.1 | RowvoipServiceGkEntry | not-accessible | current | Each row INDEX by voipServiceGkIndex And contain imformation of VoIP Service Gk. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34.1.1 | ColumnvoipServiceGkIndex | read-only | current | Configure zxr10 VoIP Service GkIndex. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34.1.2 | ColumnvoipServiceGkName | read-write | current | Configure voip Service Gk Name. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34.1.3 | ColumnvoipServiceGkAddr | read-write | current | Configure voip Service Gk Addr. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34.1.4 | ColumnvoipServiceGkPort | read-write | current | Configure voip Service Gk Port. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34.1.5 | ColumnvoipServiceGkIfMulitcast | read-write | current | Configure voip Service If Mulitcast. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34.1.6 | ColumnvoipServiceGkPriority | read-write | current | Configure voip Service Priority. |
| 1.3.6.1.4.1.3902.3.200.1.1.6.34.1.7 | ColumnvoipServiceGkRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.7 | NodevoipE1VI | |||
| 1.3.6.1.4.1.3902.3.200.1.1.7.1 | TablevoipE1VIParaTable | not-accessible | current | Configure E1VIPara parameters,such as interface frame format... |
| 1.3.6.1.4.1.3902.3.200.1.1.7.1.1 | RowvoipE1VIParaEntry | not-accessible | current | Each row INDEX by ifIndex which import from FROM RFC1213-MIB. And contain imformation of E1VIPara. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.1.1.1 | ColumnvoipE1VIParaClockSource | read-write | current | SET clock source pick-up mode. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.1.1.2 | ColumnvoipE1VIParaFrame | read-write | current | Set interface frame format. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.1.1.3 | ColumnvoipE1VIParaLinecode | read-write | current | Set interface line coding format. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.1.1.4 | ColumnvoipE1VIParaState | read-write | current | This object founcation is to shutdown E1VIPara voiceport. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.1.1.5 | ColumnvoipE1VIIfName | read-only | current | Show interface name. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2 | TablevoipR2Table | not-accessible | current | Configure R2 parameters,such as signals's timeouts... |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1 | RowvoipR2Entry | not-accessible | current | Each row INDEX by ifIndex which import from FROM RFC1213-MIB. And contain imformation of R2. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.1 | ColumnvoipR2CallerDigitsNumber | read-write | current | Configure the required number of collected number before asking for main numbers or identifier. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.2 | ColumnvoipR2CountryName | read-write | current | Configure the default R2 sign parameters distinguish of country name. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.3 | ColumnvoipR2InvertABCD | read-write | current | Configure line signal reverse mode. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.4 | ColumnvoipR2Ka | read-write | current | Configure KA signal coding. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.5 | ColumnvoipR2Kb | read-write | current | Configure KB signal coding. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.6 | ColumnvoipR2Kd | read-write | current | Configure KD signal coding. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.7 | ColumnvoipR2SeizureAckTime | read-write | current | Configure voip R2 Seizure Ack Time. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.8 | ColumnvoipR2DebounceTime | read-write | current | Configure voip R2 Debounce Time Number. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.9 | ColumnvoipR2UnusedABCD | read-write | current | Configure voip R2 Unused ABCD. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.10 | ColumnvoipR2TimeoutsKb | read-write | current | Configure voip R2 Timeouts of Kb. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.11 | ColumnvoipR2TimeoutsKd | read-write | current | Configure voip R2 Timeouts of Kd. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.12 | ColumnvoipR2TimeoutsNextnum | read-write | current | Configure voip R2 Timeouts of Nextnum. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.13 | ColumnvoipR2TimeoutsRinging | read-write | current | Configure voip R2 Timeouts of Ringing. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.14 | ColumnvoipR2TimeoutsSendsaw | read-write | current | Configure voip R2 Timeouts of Sendsaw. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.15 | ColumnvoipR2TimeoutsReleaseguard | read-write | current | Configure voip R2 Timeouts of Releaseg. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.2.1.16 | Columnr2IfName | read-only | current | Show interface name. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.3 | TablevoipR2TimeslotTable | not-accessible | current | Configure R2 Slot Table,such as signals's TrunkDirection... |
| 1.3.6.1.4.1.3902.3.200.1.1.7.3.1 | RowvoipR2TimeslotEntry | not-accessible | current | Each row INDEX by ifIndex and voipR2Slots. ifIndex which import from FROM RFC1213-MIB. And contain imformation of R2 slot. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.3.1.1 | ColumnvoipR2Timeslots | read-only | current | Configure zxr10 VoIP R2 Timeslots. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.3.1.2 | ColumnvoipR2TimeslotStatus | read-only | current | Configure zxr10 VoIP R2 Timeslot Status. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.3.1.3 | ColumnvoipR2TimeslotTrunkDirection | read-write | current | Configure voip R2 trunk direction.such as in,out,dual. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.3.1.4 | ColumnvoipR2TimeslotAction | read-write | current | Configure voip R2 ts action such as block,open,query,reset. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.3.1.5 | ColumnvoipR2TimeslotRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.7.3.1.6 | ColumnvoipR2TimeslotIfName | read-only | current | Show interface name. |
| 1.3.6.1.4.1.3902.3.200.1.1.8 | NodevoipVoiceport | |||
| 1.3.6.1.4.1.3902.3.200.1.1.8.1 | TablevoipVoiceportTable | not-accessible | current | Configure voip Voiceport parameters,such as voipDtmfThreshold... |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1 | RowvoipVoiceportEntry | not-accessible | current | Each row INDEX by ifIndex which import from FROM RFC1213-MIB. And contain imformation of voipVoiceport. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.1 | ColumnvoipVoiceportState | read-write | current | |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.2 | ColumnvoipVoiceportPortDesc | read-write | current | Configure zxr10 VoIP Voiceport PortDesc. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.3 | ColumnvoipVoiceportIfComfortNoise | read-write | current | Configure zxr10 VoIP Voiceport PortDesc. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.4 | ColumnvoipVoiceportIfVad | read-write | current | Configure zxr10 VoIP Voiceport PortDesc. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.5 | ColumnvoipVoiceportIfEchoCancel | read-write | current | Configure voip Echo Cancel Enable . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.6 | ColumnvoipVoiceportEchoCoverage | read-write | current | Configure voip Echo Cancel Coverage . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.7 | ColumnvoipVoiceportIfDtmfRelay | read-write | current | Configure voip BlIs Dtmf Relay Use H245. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.8 | ColumnvoipVoiceportDtmfThreshold | read-write | current | Configure voip Dtmf Threshold . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.9 | ColumnvoipVoiceportInGain | read-write | current | Configure voip Input Gain . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.10 | ColumnvoipVoiceportOutAtten | read-write | current | Configure voip Output Gain . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.11 | ColumnvoipVoiceportDialNumInterval | read-write | current | Configure zxr10 VoIP Voiceport DialNum Interval . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.12 | ColumnvoipVoiceportTmoutCallDisconnect | read-write | current | Configure zxr10 VoIP Voiceport Tmout Call disconnect . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.13 | ColumnvoipVoiceportTmoutInitial | read-write | current | Configure zxr10 VoIP Voiceport Tmout Call Init . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.14 | ColumnvoipVoiceportTmoutCallDead | read-write | current | Configure zxr10 VoIP Voiceport Tmout Call Dead . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.15 | ColumnvoipVoiceportTmoutRinging | read-write | current | Configure zxr10 voip Voiceport Tmout Ringing . |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.16 | ColumnvoipVoiceportRingNumber | read-write | current | Configure voip Ring Number. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.17 | ColumnvoipVoiceportMfcThreshold | read-write | current | Configure voip Mfc Threshold. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.18 | ColumnvoipVoiceportTrunkDirection | read-write | current | Configure zxr10 VoIP Voiceport Trunk Direction. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.19 | ColumnvoipVoiceportDisplayFunction | read-write | current | Configure zxr10 VoIP Voiceport Display Function. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.1.1.20 | ColumnvoipVoiceportIfName | read-only | current | Show interface name. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.2 | TablevoipVoiceportRestrictNumberTable | not-accessible | current | Configure zxr10 VoIP Voiceport Restrict Number... |
| 1.3.6.1.4.1.3902.3.200.1.1.8.2.1 | RowvoipVoiceportRestrictNumberEntry | not-accessible | current | Each row INDEX by ifIndex which import from FROM RFC1213-MIB. And contain imformation of RestrictNumber. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.2.1.1 | ColumnvoipVoiceportRestrictNumIndex | read-only | current | SET zxr10 VoIP Voiceport RestrictNum Index. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.2.1.2 | ColumnvoipVoiceportRestrictNumber | read-write | current | Configure zxr10 VoIP Voiceport Restrict Number. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.2.1.3 | ColumnvoipVoiceportRestrictNumRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.8.2.1.4 | ColumnvoipVoiceportRestrictNumIfName | read-only | current | Show interface name. |
| 1.3.6.1.4.1.3902.3.200.1.1.9 | NodevoipRadius | |||
| 1.3.6.1.4.1.3902.3.200.1.1.9.1 | ScalarvoipRadiusRole | read-write | current | Configure voip Radius Role.. |
| 1.3.6.1.4.1.3902.3.200.1.1.9.2 | ScalarvoipRadiusAuthenGroupNum | read-write | current | Configure voip Radius authen group num. |
| 1.3.6.1.4.1.3902.3.200.1.1.9.3 | ScalarvoipRadiusAccountGroupNum | read-write | current | Configure voip Radius account group num. |
| 1.3.6.1.4.1.3902.3.200.1.1.9.4 | ScalarvoipRadiusIfAuthenDid | read-write | current | Startup voice Radius gw authen founcation. |
| 1.3.6.1.4.1.3902.3.200.1.1.9.5 | ScalarvoipRadiusIfAccountDid | read-write | current | Startup voice Radius gw accounting founcation. |
| 1.3.6.1.4.1.3902.3.200.1.1.9.6 | ScalarvoipRadiusAccountConnect | read-write | current | Configure voip Radius aaa accounting connection h323, such as none ,start-stop,stop-only, wait-start. |
| 1.3.6.1.4.1.3902.3.200.1.1.9.7 | ScalarvoipRadiusClientType | read-only | current | Configure voip Radius client protocol type ,default as zte.. |
| 1.3.6.1.4.1.3902.3.200.1.1.10 | NodevoipPhoneNumExp | |||
| 1.3.6.1.4.1.3902.3.200.1.1.10.1 | TablevoipPhoneNumExpTable | not-accessible | current | Configure zxr10 VoIP PhoneNumExp Number parameters, such as voipPhoneNumExpNumber... |
| 1.3.6.1.4.1.3902.3.200.1.1.10.1.1 | RowvoipPhoneNumExpEntry | not-accessible | current | Each row INDEX by voipPhoneNumExpIndex And contain imformation of voipPhoneNumExpNumber. |
| 1.3.6.1.4.1.3902.3.200.1.1.10.1.1.1 | ColumnvoipPhoneNumExpIndex | read-only | current | Configure zxr10 VoIP PhoneNumExp Index. |
| 1.3.6.1.4.1.3902.3.200.1.1.10.1.1.2 | ColumnvoipPhoneNumExpNumber | read-write | current | Configure voip PhoneNumExpNumber. |
| 1.3.6.1.4.1.3902.3.200.1.1.10.1.1.3 | ColumnvoipPhoneNumExpAbbreviateNumber | read-write | current | Configure zxr10 VoIP PhoneNumExp Number Abbreviate. |
| 1.3.6.1.4.1.3902.3.200.1.1.10.1.1.4 | ColumnvoipPhoneNumExpRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.11 | NodevoipNewService | |||
| 1.3.6.1.4.1.3902.3.200.1.1.11.1 | TablevoipNewServiceTable | not-accessible | current | Configure voip new Service Table,such as signals's voipnewServiceCode... |
| 1.3.6.1.4.1.3902.3.200.1.1.11.1.1 | RowvoipNewServiceEntry | not-accessible | current | Each row INDEX by voipNewServiceIndex. And contain imformation of voip newService. |
| 1.3.6.1.4.1.3902.3.200.1.1.11.1.1.1 | ColumnvoipNewServiceIndex | read-only | current | Configure zxr10 VoIP NewService Index . |
| 1.3.6.1.4.1.3902.3.200.1.1.11.1.1.2 | ColumnvoipNewServiceCode | read-write | current | Configure voip new Service Code. |
| 1.3.6.1.4.1.3902.3.200.1.1.11.1.1.3 | ColumnvoipNewServiceType | read-write | current | Configure voip new Service Type. |
| 1.3.6.1.4.1.3902.3.200.1.1.11.1.1.4 | ColumnvoipNewServiceGport | read-write | current | Configure voip new Service Type. |
| 1.3.6.1.4.1.3902.3.200.1.1.11.1.1.5 | ColumnvoipNewServiceRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.12 | NodevoipShowCallHistory | |||
| 1.3.6.1.4.1.3902.3.200.1.1.12.1 | TablevoipShowCallHistoryTable | not-accessible | current | Show Call History parameters,such as voipShowCallHistorySlot... |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1 | RowvoipShowCallHistoryEntry | not-accessible | current | Each row INDEX by ifIndex and voipSlot, ifIndex which import from from RFC1213-MIB. And contain imformation of R2. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.1 | ColumnvoipShowCallHistorySlot | read-only | current | Show zxr10 VoIP Show Call History Slot. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.2 | ColumnvoipShowCallHistoryCallingCount | read-only | current | Show voip Calling Count. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.3 | ColumnvoipShowCallHistoryCallingSuccessCount | read-only | current | Show voip Calling Success Count. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.4 | ColumnvoipShowCallHistoryCalledCount | read-only | current | Show voip Called Count. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.5 | ColumnvoipShowCallHistoryCalledSuccessCount | read-only | current | Show voip Called Success Count. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.6 | ColumnvoipShowCallHistoryCalledCode | read-only | current | Show zxr10 VoIP Show Call History Called Code. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.7 | ColumnvoipShowCallHistoryClearCount | read-only | current | Configure VoIP Show Call History Clear Count. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.8 | ColumnvoipShowCallHistoryLastClearTime | read-only | current | Configure zxr10 VoIP Show Call History Last Clear Time. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.9 | ColumnvoipShowCallHistoryClear | read-write | current | Configure voip Calling Statistics Clear flag. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.1.1.10 | ColumnvoipShowCallHistoryIfName | read-only | current | Show interface name. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.2 | TablevoipShowCallHistoryPhoneCodeTable | not-accessible | current | Show Call History parameters,such as voipShowCallHistoryPhoneCode... |
| 1.3.6.1.4.1.3902.3.200.1.1.12.2.1 | RowvoipShowCallHistoryPhoneCodeEntry | not-accessible | current | Each row INDEX by ifIndex and voipShowCallHistoryPhoneCode, ifIndex which import from from RFC1213-MIB. And contain imformation of R2. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.2.1.1 | ColumnvoipShowCallHistoryPhoneCode | read-only | current | Show zxr10 VoIP Show Call History Phone Code. |
| 1.3.6.1.4.1.3902.3.200.1.1.12.2.1.2 | ColumnvoipShowCallHistoryPhoneCodeCount | read-only | current | Show zxr10 VoIP Show Call History Phone Code Count. |
| 1.3.6.1.4.1.3902.3.200.1.1.13 | NodevoipShowR2CallStatistics | |||
| 1.3.6.1.4.1.3902.3.200.1.1.13.1 | ScalarvoipShowCallHistoryTkBlock | read-only | current | Show voip Tk lock . |
| 1.3.6.1.4.1.3902.3.200.1.1.13.2 | ScalarvoipShowCallHistoryTkiWaitCaller | read-only | current | Show voip Tki Wait Caller. |
| 1.3.6.1.4.1.3902.3.200.1.1.13.3 | ScalarvoipShowCallHistoryTkiWaitKD | read-only | current | Show voip Tki Wait KD. |
| 1.3.6.1.4.1.3902.3.200.1.1.13.4 | ScalarvoipShowCallHistoryTkiCalledOnhook | read-only | current | Show voip Tki Called Onhook. |
| 1.3.6.1.4.1.3902.3.200.1.1.13.5 | ScalarvoipShowCallHistoryTkoSendCaller | read-only | current | Show voip Tko Send Caller. |
| 1.3.6.1.4.1.3902.3.200.1.1.13.6 | ScalarvoipShowCallHistoryTkoWaitKB | read-only | current | Show voip Tko Wait KB. |
| 1.3.6.1.4.1.3902.3.200.1.1.14 | NodevoipShowGwH323Statistics | |||
| 1.3.6.1.4.1.3902.3.200.1.1.14.1 | ScalarvoipCallingAuthSuccNum | read-only | current | Show voip Calling Auth Succ Num. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.2 | ScalarvoipCallingAcctStartSuccNum | read-only | current | Show voip Calling AcctStartSuccNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.3 | ScalarvoipCallingAcctStopSuccNum | read-only | current | Show voip Calling AcctStopSuccNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.4 | ScalarvoipCallingAuthRejNum | read-only | current | Show voip Calling Authen RejNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.5 | ScalarvoipCallingAcctStartRejNum | read-only | current | Show voip Calling AcctStartRejNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.6 | ScalarvoipCallingAcctStopRejNum | read-only | current | Show voip Calling AcctStopRejNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.7 | ScalarvoipCallingServerTimeoutNum | read-only | current | Show voip Calling Server Timeout Num. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.8 | ScalarvoipCallingClientCfgErrNum | read-only | current | Show voip Calling Client CfgErrNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.9 | ScalarvoipCallingUserMsgInvalidNum | read-only | current | Show voip Calling User MsgInvalidNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.10 | ScalarvoipCallingAuthNoDidNum | read-only | current | Show voip Calling Authen NoDid Num. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.11 | ScalarvoipCallingAcctNoDidNum | read-only | current | Show voip Calling AcctNoDidNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.12 | ScalarvoipCalledAuthSuccNum | read-only | current | Show voip Called Authen SuccNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.13 | ScalarvoipCalledAcctStartSuccNum | read-only | current | Show voip Called AcctStartSuccNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.14 | ScalarvoipCalledAcctStopSuccNum | read-only | current | Show voip Called AcctStopSuccNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.15 | ScalarvoipCalledAuthRejNum | read-only | current | Show voip Called Authen RejNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.16 | ScalarvoipCalledAcctStartRejNum | read-only | current | Show voip Called AcctStartRejNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.17 | ScalarvoipCalledAcctStopRejNum | read-only | current | Show voip Called AcctStopRejNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.18 | ScalarvoipCalledServerTimeoutNum | read-only | current | Show voip Called Server Timeout Num. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.19 | ScalarvoipCalledClientCfgErrNum | read-only | current | Show voip Called Client CfgErrNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.20 | ScalarvoipCalledUserMsgInvalidNum | read-only | current | Show voip Called User MsgInvalidNum. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.21 | ScalarvoipCalledAuthNoDidNum | read-only | current | Show voip Called Authen NoDidNum . |
| 1.3.6.1.4.1.3902.3.200.1.1.14.22 | ScalarvoipCalledAcctNoDidNum | read-only | current | Show voip Called AcctNoDidNum . |
| 1.3.6.1.4.1.3902.3.200.1.1.14.23 | ScalarvoipGwH323StatisticsClearCount | read-only | current | Configure VoIP Gw H323 Statistics Clear Time. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.24 | ScalarvoipGwH323StatisticsLastClearTime | read-only | current | Configure zxr10 VoIP Gw H323 Statistics Last Clear Time. |
| 1.3.6.1.4.1.3902.3.200.1.1.14.25 | ScalarvoipGwH323StatisticsClear | read-write | current | Configure voip Gateway H323 Statistics Clear flag. |
| 1.3.6.1.4.1.3902.3.200.1.1.15 | NodevoipCalleridClass | |||
| 1.3.6.1.4.1.3902.3.200.1.1.15.1 | TablevoipCalleridClassTable | not-accessible | current | Configure voip Callerid Class parameters, such as voipRuleNo... |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1 | RowvoipCalleridClassEntry | not-accessible | current | Each row INDEX by voipRuleNo And contain imformation of voipCalleridClassTable. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.1 | ColumnvoipRuleNo | read-only | current | Configure voip Rule No. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.2 | ColumnvoipCalleridNo1 | read-write | current | Configure voip Callerid No.1. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.3 | ColumnvoipCalleridNo2 | read-write | current | Configure voip Callerid No.2. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.4 | ColumnvoipCalleridNo3 | read-write | current | Configure voip Callerid No.3 . |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.5 | ColumnvoipCalleridNo4 | read-write | current | Configure voip Callerid No.4. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.6 | ColumnvoipCalleridNo5 | read-write | current | Configure voip Callerid No.5. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.7 | ColumnvoipCalleridNo6 | read-write | current | Configure voip Callerid No.6. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.8 | ColumnvoipCalleridNo7 | read-write | current | Configure voip Callerid No.7. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.9 | ColumnvoipCalleridNo8 | read-write | current | Configure voip Callerid No.8. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.10 | ColumnvoipCalleridNo9 | read-write | current | Configure voip Callerid No.9. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.11 | ColumnvoipCalleridNo10 | read-write | current | Configure voip Callerid No.10. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.1.1.12 | ColumnvoipCalleridClassRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.2 | TablevoipPhoneNumRuleTable | not-accessible | current | Configure voip Phone NumRule parameters, such as voipPhoneNumRuleNo... |
| 1.3.6.1.4.1.3902.3.200.1.1.15.2.1 | RowvoipPhoneNumRuleEntry | not-accessible | current | Each row INDEX by voipPhoneNumRuleNo And contain imformation of voipPhoneNumRuleTable. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.2.1.1 | ColumnvoipPhoneNumRuleNo | read-only | current | Configure voip Phone Num Rule No. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.2.1.2 | ColumnvoipCallerPrefix | read-write | current | Configure zxr10 voIP Caller Prefix. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.2.1.3 | ColumnvoipCalleePrefix | read-write | current | Configure zxr10 voIP Prefix. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.2.1.4 | ColumnvoipTruncateLen | read-write | current | Configure zxr10 voIPtruncate Len. |
| 1.3.6.1.4.1.3902.3.200.1.1.15.2.1.5 | ColumnvoipPhoneNumRuleRowStatus | read-write | current | This variable is used to create, modify, and/or delete a row in this table. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CodecType | INTEGER { g711A(0), g711A-56k(1), g711U(2), g711U-56k(3), g722(4), g722-56k(5), g722-48k(6), g723(7), g728(8), g729(9), g729A(10), g729wB(11), g729AwB(12), clear-channel(13), transparent(14) } | current | VoIP voip Dialpeer Codec Type |
| DisplayString | OCTET STRING | ||
| H323IfFastconType | INTEGER { fast-connect(1), slow(0) } | current | VoIP Voip Dialpeer IfFastconnect Type |
| VoIPCallingStatisticsClearType | INTEGER { no(0), clear(1) } | current | VoIP Calling Statistics Clear Type |
| VoIPDialpeerStateType | INTEGER { up(0), shutdown (1) } | current | VoIP Dialpeer State Type |
| VoIPDialpeerTypeType | INTEGER { pots (1), voip (2) } | current | VoIP Dialpeer Type |
| VoIPE1ClockSourceType | INTEGER { line(1), internal(2) } | current | clock source type |
| VoIPE1FramingType | INTEGER { nocrc4(2), crc4(1) } | current | E1 frame type |
| VoIPE1LinecodeHdb3Type | INTEGER { ami(1), hdb3(2) } | current | E1 encode type |
| VoIPE1ShutDownType | INTEGER { shutdown(0), up(1) } | current | VoIP E1 ShutDown type |
| VoIPGwH323StatisticsClearType | INTEGER { clear(1), no(0) } | current | VoIP Gw H323 Statistics Clear Type |
| VoIPPotsDialpeerIfDigitStripType | INTEGER { cancel-truncate(0), no(1) } | current | VoIP Pots Dialpeer IfDigitStripType |
| VoIPR2TrunkDirectionType | INTEGER { dual(1), in(2), out(3) } | current | VoIP R2Trunk Direction Type |
| VoIPR2TsActionType | INTEGER { open(1), block(0), reset(3) } | current | VoIP R2 Ts Action Type |
| VoIPRadiusAaaAccountingConnectionH323Type | INTEGER { start-stop (0), stop-only (1), wait-start (2), none (3) } | current | VoIP Radius Aaa Accounting Connection H323 Type |
| VoIPRadiusGwAccountingH323Type | INTEGER { accounting(1), no(0) } | current | VoIP Radius Gw Accounting H323 Type |
| VoIPRadiusGwAuthenDidH323Type | INTEGER { authen(1), no(0) } | current | VoIP Radius Gw Authen DidH323 Type |
| VoIPRadiusgwVoipAaaClienttypeZteType | INTEGER { zte (0) } | current | VoIP Radius gw Voip Aaa Client type ZteType |