ZXROSNG-TPAPS-MIB
47 objects
MIB for query status and configuration of the linear APS instance
Imported Objects
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| ZXR10-SMI | zxr10RosngMIB |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.200 | IdentityzxAPSProtectMIB | MIB for query status and configuration of the linear APS instance | ||
| 1.3.6.1.4.1.3902.3.6000.200.2 | TablezxAPSLineProtectTGConfigTable | not-accessible | current | Configuration table of tunnel protection group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.2.1 | RowzxAPSLineProtectTGConfigEntry | not-accessible | current | Configuration entry of tunnel protection group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.2.1.1 | ColumnzxAPSLineProtectTGTGID | not-accessible | current | The group id of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.2.1.2 | ColumnzxAPSLineProtectTGActiveState | read-only | current | The active state of this protection group restoreRun(0): Restore to run APS pause(1): Pause APS |
| 1.3.6.1.4.1.3902.3.6000.200.2.1.3 | ColumnzxAPSLineProtectTGSendPMode | read-only | current | The protection mode of this protection group send(0): To send APS packets nosend(1): Not to send APS packets |
| 1.3.6.1.4.1.3902.3.6000.200.2.1.4 | ColumnzxAPSLineProtectTGHoldOffTime | read-only | current | The hold-off time of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.2.1.5 | ColumnzxAPSLineProtectTGRevertMode | read-only | current | The revertive mode of this protection group revertive(0): APS is in revertive operation, which normal traffic signal is restored to the working transport entit… |
| 1.3.6.1.4.1.3902.3.6000.200.2.1.6 | ColumnzxAPSLineProtectTGWTRTime | read-only | current | The wait-to-restore time of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.2.1.7 | ColumnzxAPSLineProtectTGSwitchFlag | read-only | current | The switch command of this protection group none(0): The switch command hasn't been configured or has been cleared clear(1): Clear the externally initiated com… |
| 1.3.6.1.4.1.3902.3.6000.200.2.1.8 | ColumnzxAPSLineProtectTGBridgeType | read-only | current | The bridge type of this protection group selector(2): Selector bridge broadcast(1): Broadcast bridge |
| 1.3.6.1.4.1.3902.3.6000.200.3 | TablezxAPSLineProtectPWConfigTable | not-accessible | current | Configuration table of pw group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.3.1 | RowzxAPSLineProtectPWConfigEntry | not-accessible | current | Configuration entry of pw group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.3.1.1 | ColumnzxAPSLineProtectPWName | read-only | current | The group name of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.3.1.2 | ColumnzxAPSLineProtectPWActiveState | read-only | current | The active state of this protection group restoreRun(0): Restore to run APS pause(1): Pause APS |
| 1.3.6.1.4.1.3902.3.6000.200.3.1.3 | ColumnzxAPSLineProtectPWSendPMode | read-only | current | The protection mode of this protection group send(0): To send APS packets nosend(1): Not to send APS packets |
| 1.3.6.1.4.1.3902.3.6000.200.3.1.4 | ColumnzxAPSLineProtectPWHoldOffTime | read-only | current | The hold-off time of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.3.1.5 | ColumnzxAPSLineProtectPWRevertMode | read-only | current | The revertive mode of this protection group revertive(0): APS is in revertive operation, which normal traffic signal is restored to the working transport entit… |
| 1.3.6.1.4.1.3902.3.6000.200.3.1.6 | ColumnzxAPSLineProtectPWWTRTime | read-only | current | The wait-to-restore time of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.3.1.7 | ColumnzxAPSLineProtectPWSwitchFlag | read-only | current | The switch command of this protection group none(0): The switch command hasn't been configured or has been cleared clear(1): Clear the externally initiated com… |
| 1.3.6.1.4.1.3902.3.6000.200.3.1.8 | ColumnzxAPSLineProtectPWBridgeType | read-only | current | The bridge type of this protection group selector(2): Selector bridge broadcast(1): Broadcast bridge |
| 1.3.6.1.4.1.3902.3.6000.200.4 | TablezxAPSLineProtectTGStatusTable | not-accessible | current | Status table of tunnel protection group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.4.1 | RowzxAPSLineProtectTGStatusEntry | not-accessible | current | Status entry of tunnel protection group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.4.1.1 | ColumnzxAPSLineProtectTGStatusTGID | not-accessible | current | The group id of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.4.1.2 | ColumnzxAPSLineProtectTGStatusState | read-only | current | The current APS state of this protection group noRequestNull(0): There is no request or the far end has configured lockout noRequestNormal(1): The far end has … |
| 1.3.6.1.4.1.3902.3.6000.200.5 | TablezxAPSLineProtectPWStatusTable | not-accessible | current | Status table of pw group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.5.1 | RowzxAPSLineProtectPWStatusEntry | not-accessible | current | Status entry of pw group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.5.1.1 | ColumnzxAPSLineProtectPWStatusPWName | read-only | current | The group name of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.5.1.2 | ColumnzxAPSLineProtectPWStatusState | read-only | current | The current APS state of this protection group noRequestNull(0): There is no request or the far end has configured lockout noRequestNormal(1): The far end has … |
| 1.3.6.1.4.1.3902.3.6000.200.6 | TablezxAPSLineProtectPGConfigTable | not-accessible | current | Configuration table of port protection group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.6.1 | RowzxAPSLineProtectPGConfigEntry | not-accessible | current | Configuration entry of port protection group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.6.1.1 | ColumnzxAPSLineProtectPGPGID | not-accessible | current | The group id of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.6.1.2 | ColumnzxAPSLineProtectPGActiveState | read-only | current | The active state of this protection group restoreRun(0): Restore to run APS pause(1): Pause APS |
| 1.3.6.1.4.1.3902.3.6000.200.6.1.4 | ColumnzxAPSLineProtectPGHoldOffTime | read-only | current | The hold-off time of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.6.1.5 | ColumnzxAPSLineProtectPGRevertMode | read-only | current | The revertive mode of this protection group revertive(0): APS is in revertive operation, which normal traffic signal is restored to the working transport entit… |
| 1.3.6.1.4.1.3902.3.6000.200.6.1.6 | ColumnzxAPSLineProtectPGWTRTime | read-only | current | The wait-to-restore time of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.6.1.7 | ColumnzxAPSLineProtectPGSwitchFlag | read-only | current | The switch command of this protection group none(0): The switch command hasn't been configured or has been cleared clear(1): Clear the externally initiated com… |
| 1.3.6.1.4.1.3902.3.6000.200.7 | TablezxAPSLineProtectPGStatusTable | not-accessible | current | Status table of port group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.7.1 | RowzxAPSLineProtectPGStatusEntry | not-accessible | current | Status entry of port group's APS |
| 1.3.6.1.4.1.3902.3.6000.200.7.1.1 | ColumnzxAPSLineProtectPGStatusPGID | not-accessible | current | The group id of this protection group |
| 1.3.6.1.4.1.3902.3.6000.200.7.1.2 | ColumnzxAPSLineProtectPGStatusState | read-only | current | The current APS state of this protection group noRequestNull(0): There is no request or the far end has configured lockout noRequestNormal(1): The far end has … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ApsActiveState | INTEGER {restoreRun(0), pause(1) } | current | APS active state |
| ApsBridgeType | INTEGER {broadcast(1), selector(2) } | current | APS bridge type |
| ApsRevertMode | INTEGER {revertive(0), nonrevertive(1) } | current | APS revertive mode |
| ApsSendPMode | INTEGER {send(0), nosend(1) } | current | APS packet sending mode |
| ApsStatusState | INTEGER { noRequestNull(0), noRequestNormal(1), lockout(2), forcedSwitch(3), signalFailW(4), signalFailP(5), manualSwitch(6), waitToRestore(7), exerciseNull(8), exerciseNormal(9), doNotRevert(10), signalDegrW(11), signalDegrP(12), manualSwitchW(13), forcedSwitchW(14), mappingSwitchW(15), mappingSwitchP(16), reverseRequestNull(17), reverseRequestNormal(18) } | current | APS state |
| ApsSwitchCmd | INTEGER {none(0), clear(1), lockout(2), fsP(3), msP(4), exercise(5), fsW(6), msW(7) } | current | APS switch command |