ZXSONETIF-MIB
26 objects
The MIB module to describe DS1, E1, DS2, and E2 interfaces objects.
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| ZTE-MASTER-MIB | zxPwCTDM |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1015.1013.2.1.3 | IdentityzxSonetIfMIB | The MIB module to describe DS1, E1, DS2, and E2 interfaces objects. | ||
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.1 | TablezxSonetCfgTable | not-accessible | current | The SONET/SDH Medium table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.1.1 | RowzxSonetCfgEntry | not-accessible | current | An entry in the SONET/SDH Medium table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.1.1.1 | ColumnzxSonetIfIndex | not-accessible | deprecated | The 4 bytes index includes: interface type(bit31~28);shelfId(bit27~24);slotId(bit23~16); portId(bit15~8);reserved(bit7~bit0) . |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.1.1.2 | ColumnzxSonetLoopBackType | read-write | current | Represents the desired loopback configuration of the SONET line. noLoopback: Not in the loopback state. lineLoop: The received signal at this interface does no… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.1.1.3 | ColumnzxSonetClockSource | read-write | current | The source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.1.1.4 | ColumnzxSonetConfigType | read-only | current | Represents the configured line type.This object is used to switch between SONET(North American)and SDH(European) format. Sts is SONET format, while Stm is SDH … |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.1.1.5 | ColumnzxSonetConfigMapType | read-write | current | |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.1.1.6 | ColumnzxSonetCfgInfoSend | read-write | current | The action to send the configuration of Sonet line to corresponding card. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2 | TablezxSonetMediumTable | not-accessible | current | The SONET/SDH Medium table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1 | RowzxSonetMediumEntry | not-accessible | current | An entry in the SONET/SDH Medium table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1.1 | ColumnzxSonetMediumType | read-write | current | This variable identifies whether a SONET or a SDH signal is used across this interface. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1.2 | ColumnzxSonetMediumTimeElapsed | read-only | current | The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adju… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1.3 | ColumnzxSonetMediumValidIntervals | read-only | current | The number of previous 15-minute intervals for which data was collected. A SONET/SDH interface must be capable of supporting at least n intervals. The minimum … |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1.4 | ColumnzxSonetMediumLineCoding | read-write | current | This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET/SDH signals (STS-1 and STS-3). The Non-Return to Zer… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1.5 | ColumnzxSonetMediumLineType | read-write | current | This variable describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax an… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1.6 | ColumnzxSonetMediumCircuitIdentifier | read-write | current | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. Note that the circuit identifier, if avai… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1.7 | ColumnzxSonetMediumInvalidIntervals | read-only | current | The number of intervals in the range from 0 to zxSonetMediumValidIntervals for which no data is available. This object will typically be zero except in cases w… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.2.1.8 | ColumnzxSonetMediumLoopbackConfig | read-write | current | The current loopback state of the SONET/SDH interface. The values mean: sonetNoLoop Not in the loopback state. A device that is not capable of performing a loo… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.3 | TablezxSonetVTConfigTable | not-accessible | current | The Sonet VT Configuration table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1 | RowzxSonetVTConfigEntry | not-accessible | current | An entry in the Sonet VT Configuration table. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.1 | ColumnzxSonetVTIfIndex | not-accessible | deprecated | The 4 bytes index includes: interface type(bit31~28);shelfId(bit27~24);slotId(bit23~19);portId(bit18~16);augno(bit15~bit10); au3/au4no(bit9~bit8);tug3no(bit7~b… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.2 | ColumnzxSonetVTLoopbackConfig | read-write | current | This variable represents the desired loopback configuration of the Sonet VT. Agents supporting read/write access should return inconsistentValue in response to… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.3 | ColumnzxSonetVTTransmitClockSource | read-write | current | The source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock… |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.4 | ColumnzxSonetVTClockStatus | read-only | current | The current clock state of the sonet VT interface. the value can be: FREERUN 0 HOLDOVER 1 ACQUIRING 2 ACUIRED 3. |
| 1.3.6.1.4.1.3902.1015.1013.2.1.3.3.1.5 | ColumnzxSonetVTCfgInfoSend | read-write | current | The action to send the configuration on Sonet VT to corresponding card. |