ACC-COMPRESS
112 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum |
| RFC1155-SMI | Counter Gauge OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.6 | NodeaccCompress | |||
| 1.3.6.1.4.1.5.1.1.6.1 | TableaccCompressDialNeighborTable | not-accessible | mandatory | Data compression neighbor exception table for dial ports containing data compression parameters for selected neighbors. |
| 1.3.6.1.4.1.5.1.1.6.1.1 | RowaccCompressDialNeighborEntry | not-accessible | mandatory | Data compression neighbor exception table entry containing data compression parameters for a particular dial port neighbor. |
| 1.3.6.1.4.1.5.1.1.6.1.1.1 | ColumnaccCompressDialNeighborIfIndex | read-only | mandatory | The ifindex of the dial port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.1.1.2 | ColumnaccCompressDialNeighborCallAddress | read-only | mandatory | The call address of the neighbor to which the dial port is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.1.1.3 | ColumnaccCompressDialNeighborStatus | read-write | mandatory | The administrative status of data compression for this dial neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanentl… |
| 1.3.6.1.4.1.5.1.1.6.2 | TableaccCompressFfrNeighborTable | not-accessible | mandatory | Data compression neighbor exception table for frame relay circuits containing data compression parameters for selected neighbors. |
| 1.3.6.1.4.1.5.1.1.6.2.1 | RowaccCompressFfrNeighborEntry | not-accessible | mandatory | Data compression neighbor exception table entry containing data compression parameters for a particular frame relay neighbor. |
| 1.3.6.1.4.1.5.1.1.6.2.1.1 | ColumnaccCompressFfrNeighborIfIndex | read-only | mandatory | The physical port index via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.2.1.2 | ColumnaccCompressFfrNeighborDlci | read-only | mandatory | A unique identifier for the neighbor. In this case it is the local DLCI. |
| 1.3.6.1.4.1.5.1.1.6.2.1.3 | ColumnaccCompressFfrNeighborStatus | read-write | mandatory | The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently rem… |
| 1.3.6.1.4.1.5.1.1.6.3 | TableaccCompressX25NeighborTable | not-accessible | mandatory | Data compression neighbor exception table for X25 circuits containing data compression parameters for selected neighbors. |
| 1.3.6.1.4.1.5.1.1.6.3.1 | RowaccCompressX25NeighborEntry | not-accessible | mandatory | Data compression neighbor exception table entry containing data compression parameters for a particular X.25 neighbor. |
| 1.3.6.1.4.1.5.1.1.6.3.1.1 | ColumnaccCompressX25NeighborIfIndex | read-only | mandatory | The physical port index via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.3.1.2 | ColumnaccCompressX25NeighborAddress | read-only | mandatory | A unique identifier for the neighbor. This is the neighbor's DTE address |
| 1.3.6.1.4.1.5.1.1.6.3.1.3 | ColumnaccCompressX25NeighborStatus | read-write | mandatory | The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently rem… |
| 1.3.6.1.4.1.5.1.1.6.4 | TableaccCompressDialStatTable | not-accessible | mandatory | Data compression statistics table for dial ports containing data compression statistics for all active dial port neighbors. |
| 1.3.6.1.4.1.5.1.1.6.4.1 | RowaccCompressDialStatEntry | not-accessible | mandatory | Data compression dial port statistics table entry containing data compression statistics for a particular dial port neighbor. |
| 1.3.6.1.4.1.5.1.1.6.4.1.1 | ColumnaccCompressDialStatIfIndex | read-only | mandatory | The interface index of the dial port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.4.1.2 | ColumnaccCompressDialStatCallAddress | read-only | mandatory | The call address of the neighbor to which the dial port is currently connected. |
| 1.3.6.1.4.1.5.1.1.6.4.1.3 | ColumnaccCompressDialStatStatus | read-only | mandatory | The operational status of the neighbor. |
| 1.3.6.1.4.1.5.1.1.6.4.1.4 | ColumnaccCompressDialStatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.4.1.5 | ColumnaccCompressDialStatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.4.1.6 | ColumnaccCompressDialStatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.4.1.7 | ColumnaccCompressDialStatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.4.1.8 | ColumnaccCompressDialStatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.4.1.9 | ColumnaccCompressDialStatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.4.1.10 | ColumnaccCompressDialStatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.4.1.11 | ColumnaccCompressDialStatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.4.1.12 | ColumnaccCompressDialStatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.4.1.13 | ColumnaccCompressDialStatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.4.1.14 | ColumnaccCompressDialStatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.4.1.15 | ColumnaccCompressDialStatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |
| 1.3.6.1.4.1.5.1.1.6.5 | TableaccCompressFfrStatTable | not-accessible | mandatory | Data compression statistics table containing data compression statistics for all active frame relay neighbors. |
| 1.3.6.1.4.1.5.1.1.6.5.1 | RowaccCompressFfrStatEntry | not-accessible | mandatory | Data compression statistics table entry containing data compression statistics for a particular frame relay neighbor. |
| 1.3.6.1.4.1.5.1.1.6.5.1.1 | ColumnaccCompressFfrStatIfIndex | read-only | mandatory | The physical port index of the port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.5.1.2 | ColumnaccCompressFfrStatDlci | read-only | mandatory | This is the local DLCI for the frame relay neighbor. |
| 1.3.6.1.4.1.5.1.1.6.5.1.3 | ColumnaccCompressFfrStatStatus | read-only | mandatory | The operational status of the neighbor. |
| 1.3.6.1.4.1.5.1.1.6.5.1.4 | ColumnaccCompressFfrStatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.5.1.5 | ColumnaccCompressFfrStatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.5.1.6 | ColumnaccCompressFfrStatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.5.1.7 | ColumnaccCompressFfrStatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.5.1.8 | ColumnaccCompressFfrStatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.5.1.9 | ColumnaccCompressFfrStatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.5.1.10 | ColumnaccCompressFfrStatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.5.1.11 | ColumnaccCompressFfrStatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.5.1.12 | ColumnaccCompressFfrStatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.5.1.13 | ColumnaccCompressFfrStatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.5.1.14 | ColumnaccCompressFfrStatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.5.1.15 | ColumnaccCompressFfrStatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |
| 1.3.6.1.4.1.5.1.1.6.6 | TableaccCompressX25StatTable | not-accessible | mandatory | Data compression statistics table containing data compression statistics for all active X.25 neighbors. |
| 1.3.6.1.4.1.5.1.1.6.6.1 | RowaccCompressX25StatEntry | not-accessible | mandatory | Data compression statistics table entry containing data compression statistics for a particular X.25 neighbor. |
| 1.3.6.1.4.1.5.1.1.6.6.1.1 | ColumnaccCompressX25StatIfIndex | read-only | mandatory | The physical port index of the port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.6.1.2 | ColumnaccCompressX25StatAddress | read-only | mandatory | DTE address for the X.25 neighbor. |
| 1.3.6.1.4.1.5.1.1.6.6.1.3 | ColumnaccCompressX25StatStatus | read-only | mandatory | The operational status of the neighbor. |
| 1.3.6.1.4.1.5.1.1.6.6.1.4 | ColumnaccCompressX25StatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.6.1.5 | ColumnaccCompressX25StatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.6.1.6 | ColumnaccCompressX25StatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.6.1.7 | ColumnaccCompressX25StatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.6.1.8 | ColumnaccCompressX25StatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.6.1.9 | ColumnaccCompressX25StatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.6.1.10 | ColumnaccCompressX25StatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.6.1.11 | ColumnaccCompressX25StatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.6.1.12 | ColumnaccCompressX25StatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.6.1.13 | ColumnaccCompressX25StatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.6.1.14 | ColumnaccCompressX25StatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.6.1.15 | ColumnaccCompressX25StatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |
| 1.3.6.1.4.1.5.1.1.6.7 | TableaccCompressPhysStatTable | not-accessible | mandatory | Data compression statistics table for physical ports containing aggregate data compression statistics for all active and inactive neighbors. |
| 1.3.6.1.4.1.5.1.1.6.7.1 | RowaccCompressPhysStatEntry | not-accessible | mandatory | Data compression statistics table entry containing aggregate data compression statistics for all neighbors through a particular physical port. |
| 1.3.6.1.4.1.5.1.1.6.7.1.1 | ColumnaccCompressPhysStatIfIndex | read-only | mandatory | The index of the physical port via which the neighbor(s) is(are) accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.7.1.2 | ColumnaccCompressPhysStatStatus | read-only | mandatory | The operational status of the neighbor. For X.25 and Frame Relay ports, as there can be more than one neighbor, this is the superior status. |
| 1.3.6.1.4.1.5.1.1.6.7.1.3 | ColumnaccCompressPhysStatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.7.1.4 | ColumnaccCompressPhysStatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.7.1.5 | ColumnaccCompressPhysStatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.7.1.6 | ColumnaccCompressPhysStatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.7.1.7 | ColumnaccCompressPhysStatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.7.1.8 | ColumnaccCompressPhysStatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.7.1.9 | ColumnaccCompressPhysStatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.7.1.10 | ColumnaccCompressPhysStatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.7.1.11 | ColumnaccCompressPhysStatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.7.1.12 | ColumnaccCompressPhysStatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.7.1.13 | ColumnaccCompressPhysStatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.7.1.14 | ColumnaccCompressPhysStatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |
| 1.3.6.1.4.1.5.1.1.6.7.1.15 | ColumnaccCompressPhysStatusInStats | read-only | mandatory | The current status of the incoming packet port compression connection. |
| 1.3.6.1.4.1.5.1.1.6.7.1.16 | ColumnaccCompressPhysStatusOutStats | read-only | mandatory | The current status of the outgoing packet port compression connection. |
| 1.3.6.1.4.1.5.1.1.6.7.1.17 | ColumnaccCompressPhysExpandInStats | read-only | mandatory | The number of incoming packets that have been uncompressed. |
| 1.3.6.1.4.1.5.1.1.6.7.1.18 | ColumnaccCompressPhysExpandOutStats | read-only | mandatory | The number of outgoing packets that have been uncompressed. |
| 1.3.6.1.4.1.5.1.1.6.7.1.19 | ColumnaccCompressPhysDiscardInStats | read-only | mandatory | The number of incoming packets that have been discarded. |
| 1.3.6.1.4.1.5.1.1.6.7.1.20 | ColumnaccCompressPhysDiscardOutStats | read-only | mandatory | The number outgoing packets that have been discarded. |
| 1.3.6.1.4.1.5.1.1.6.8 | TableaccCompressSmdsNeighborTable | not-accessible | mandatory | Data compression neighbor table for Smds connections containing data compression parameters for selected neighbors. |
| 1.3.6.1.4.1.5.1.1.6.8.1 | RowaccCompressSmdsNeighborEntry | not-accessible | mandatory | Data compression neighbor table entry containing data compression parameters for a particular Smds neighbor. |
| 1.3.6.1.4.1.5.1.1.6.8.1.1 | ColumnaccCompressSmdsNeighborIfIndex | read-only | mandatory | The physical port index via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.8.1.2 | ColumnaccCompressSmdsNeighborSNI | read-only | mandatory | A unique identifier for the neighbor. In this case it is the remote SNI address. This is the unicast Subscriber Network Interface address of the remote side in… |
| 1.3.6.1.4.1.5.1.1.6.8.1.3 | ColumnaccCompressSmdsNeighborStatus | read-write | mandatory | The administrative status of data compression for this neighbor. ON enables data compression and OFF disables it. Setting the status to INVALID permanently rem… |
| 1.3.6.1.4.1.5.1.1.6.8.1.4 | ColumnaccCompressSmdsNeighborRowStatus | read-write | mandatory | The current status of this neighbor entry. |
| 1.3.6.1.4.1.5.1.1.6.9 | TableaccCompressSmdsStatTable | not-accessible | mandatory | Data compression statistics table containing data compression statistics for all active Smds neighbors. |
| 1.3.6.1.4.1.5.1.1.6.9.1 | RowaccCompressSmdsStatEntry | not-accessible | mandatory | Data compression statistics table entry containing data compression statistics for a particular Smds neighbor. |
| 1.3.6.1.4.1.5.1.1.6.9.1.1 | ColumnaccCompressSmdsStatIfIndex | read-only | mandatory | The physical port index of the port via which the neighbor is accessed or connected. |
| 1.3.6.1.4.1.5.1.1.6.9.1.2 | ColumnaccCompressSmdsStatSNI | read-write | mandatory | A unique identifier for the neighbor. In this case it is the remote SNI address. This is the unicast Subscriber Network Interface address of the remote side in… |
| 1.3.6.1.4.1.5.1.1.6.9.1.3 | ColumnaccCompressSmdsStatStatus | read-only | mandatory | The operational status of the neighbor. |
| 1.3.6.1.4.1.5.1.1.6.9.1.4 | ColumnaccCompressSmdsStatOctetsIns | read-only | mandatory | The total number of compressed octets presented for decompression. |
| 1.3.6.1.4.1.5.1.1.6.9.1.5 | ColumnaccCompressSmdsStatOctetsOuts | read-only | mandatory | The total number of compressed octets generated after compression. |
| 1.3.6.1.4.1.5.1.1.6.9.1.6 | ColumnaccCompressSmdsStatPacketsIns | read-only | mandatory | The total number of uncompressed packets generated by decompression. |
| 1.3.6.1.4.1.5.1.1.6.9.1.7 | ColumnaccCompressSmdsStatPacketsOuts | read-only | mandatory | The total number of uncompressed packets presented for compression. |
| 1.3.6.1.4.1.5.1.1.6.9.1.8 | ColumnaccCompressSmdsStatUnCompIns | read-only | mandatory | The total number of uncompressed packets presented for decompression (i.e., packets which could not be compressed and were therefore received in their uncompre… |
| 1.3.6.1.4.1.5.1.1.6.9.1.9 | ColumnaccCompressSmdsStatUnCompOuts | read-only | mandatory | The total number of uncompressed packets presented for compression which could not be compressed (i.e., the packet expanded). These packets are transmitted in … |
| 1.3.6.1.4.1.5.1.1.6.9.1.10 | ColumnaccCompressSmdsStatAvgCompIn | read-only | mandatory | The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only… |
| 1.3.6.1.4.1.5.1.1.6.9.1.11 | ColumnaccCompressSmdsStatAvgCompOut | read-only | mandatory | The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only b… |
| 1.3.6.1.4.1.5.1.1.6.9.1.12 | ColumnaccCompressSmdsStatHdrErrors | read-only | mandatory | The number of packets received with invalid compression headers. A header error requires a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.9.1.13 | ColumnaccCompressSmdsStatResyncs | read-only | mandatory | The number of resynchronizations. |
| 1.3.6.1.4.1.5.1.1.6.9.1.14 | ColumnaccCompressSmdsStatNoEndMarks | read-only | mandatory | The number of packets received with no end marker. Missing end markers require a resynchronization of the history buffers at each end of the link. |
| 1.3.6.1.4.1.5.1.1.6.9.1.15 | ColumnaccCompressSmdsStatNoBufAvails | read-only | mandatory | The number of times the neighbor was connected and no history buffer could be allocated. |