ALC-MIB
70 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1978 | Nodengcan | |||
| 1.3.6.1.4.1.1978.2 | Nodetiger | |||
| 1.3.6.1.4.1.1978.2.10 | NodealcMIB | |||
| 1.3.6.1.4.1.1978.2.10.1 | NodealcLine | |||
| 1.3.6.1.4.1.1978.2.10.1.1 | ScalaralcNumLines | read-only | mandatory | Number of lines/CU's in the table. |
| 1.3.6.1.4.1.1978.2.10.1.2 | TablealcLineTable | not-accessible | mandatory | A list of line table entries. The number of entries is given by the value of alcNumLines. |
| 1.3.6.1.4.1.1978.2.10.1.2.1 | RowalcLineEntry | not-accessible | mandatory | An entry containing information applicable to a particular ALC line. |
| 1.3.6.1.4.1.1978.2.10.1.2.1.1 | ColumnalcLineIfIndex | read-write | mandatory | The line identifier. |
| 1.3.6.1.4.1.1978.2.10.1.2.1.2 | ColumnalcLineStationType | read-write | mandatory | Defines the mode of operation for this line: Primary: We poll terminals, SecondaryPointtopoint: They poll us, we are the only device on the line, SecondaryMult… |
| 1.3.6.1.4.1.1978.2.10.1.2.1.3 | ColumnalcNumCuConfiged | read-only | mandatory | The number of CUs configured on this line. This count is incremented by one each time the a new CU is added to an underlying structure. |
| 1.3.6.1.4.1.1978.2.10.1.2.1.4 | ColumnalcDuplexOptions | read-write | mandatory | An option that defines how the protocol should handle polling: poll-immediate: don't wait for pad characters before sending the poll. none: as soon as the CCC … |
| 1.3.6.1.4.1.1978.2.10.1.2.1.5 | ColumnalcT3MinCycleTime | read-write | mandatory | time for a complete poll cycle. (0..1000 millisec) (PRIMARY only) This timer will delay the next live polling cycle if the total polling time per cycle is less… |
| 1.3.6.1.4.1.1978.2.10.1.2.1.6 | ColumnalcT6SegmentedMsgTimer | read-write | mandatory | (1..xx seconds) Segmented message timer. UNITS: tenths of a second |
| 1.3.6.1.4.1.1978.2.10.1.2.1.7 | ColumnalcN5LiveDeadRatio | read-write | mandatory | polling ratio (1..xxx) (PRIMARY) Number of live-site poll sequences before one dead site poll. (default: 25). UNITS: polls |
| 1.3.6.1.4.1.1978.2.10.1.2.1.8 | ColumnalcSegmentOption | read-write | mandatory | This option allows outgoing messages to be split into multiple segments of 'n' characters according to internal rules. |
| 1.3.6.1.4.1.1978.2.10.1.2.1.9 | ColumnalcReassembleOption | read-write | mandatory | This option allows incoming messages to be reassembled into multiple a single message. |
| 1.3.6.1.4.1.1978.2.10.1.2.1.10 | ColumnalcWildIAPoll | read-write | mandatory | Wild card IA polling option enabled/disabled (SECONDARY). Do we accept any IA when we are polled ? (default: disabled). |
| 1.3.6.1.4.1.1978.2.10.1.2.1.11 | ColumnalcNumOfIdles | read-write | mandatory | GA response with the number of idle pad character specified. (SECONDARY) |
| 1.3.6.1.4.1.1978.2.10.1.2.1.12 | ColumnalcInterMsgSync | read-write | mandatory | add S1, S2 between concatenated messages for Tx (SECONDARY) |
| 1.3.6.1.4.1.1978.2.10.1.2.1.13 | ColumnalcNIA | read-write | mandatory | Next Interchange Address in the GA response (default = 0x37) (SECONDARY) |
| 1.3.6.1.4.1.1978.2.10.1.2.1.14 | ColumnalcTxOverlengthFrames | read-only | mandatory | A count of the number of overlength frames sent. |
| 1.3.6.1.4.1.1978.2.10.1.2.1.15 | ColumnalcRxOverlengthFrames | read-only | mandatory | A count of the number of overlength messages received. Where the size of any segment exceeded alcCuN1MaxMsgSize. This is considered a garbled segment/message. … |
| 1.3.6.1.4.1.1978.2.10.1.2.1.16 | ColumnalcInvalidAddresses | read-only | mandatory | A count of the number of times a Bad IA was received. This is considered a garbled message. |
| 1.3.6.1.4.1.1978.2.10.1.2.1.17 | ColumnalcRxT2Expireds | read-only | mandatory | A count of the number of times the T2 timer was exceeded. Probably indicating a concatenated message sequence was too long. This is considered a garbled messag… |
| 1.3.6.1.4.1.1978.2.10.1.2.1.18 | ColumnalcDroppedMsgs | read-only | mandatory | A count of the number of messages dropped due to the line (eg. RS232 signals) being down. |
| 1.3.6.1.4.1.1978.2.10.1.2.1.19 | ColumnalcRxOverlengthFramesThres | read-write | mandatory | The value of alcRxOverlengthFrames at which a alcRxOverlengthFramesTrap is generated. (Overlength single message segments.) UNITS: errors |
| 1.3.6.1.4.1.1978.2.10.1.2.1.20 | ColumnalcInvalidAddressThres | read-write | mandatory | The value of alcInvalidAddress at which a alcInvalidAddressTrap is generated. UNITS: errors |
| 1.3.6.1.4.1.1978.2.10.1.2.1.21 | ColumnalcRxT2ExpiredThres | read-write | mandatory | The value of alcRxT2Expired at which a alcRxT2ExpiredTrap is generated. (Overlength concatenated messages.) UNITS: errors |
| 1.3.6.1.4.1.1978.2.10.1.2.1.23 | ColumnalcTrapReason | read-only | mandatory | The reason that the alcLineError trap was generated. rx-overlength-frames - number of 'received data segments that exceeded N1' exceeded its threshold. (overle… |
| 1.3.6.1.4.1.1978.2.10.1.2.1.24 | ColumnalcErrData | read-only | mandatory | An octet string containing as much of the error packet as possible. As a minimum, it must contain the address or as much as was delivered. It is desirable to i… |
| 1.3.6.1.4.1.1978.2.10.1.3 | TablealcCuTable | not-accessible | mandatory | A list of Cu table entries. The number of entries is given by the value of alcNumCuConfiged. |
| 1.3.6.1.4.1.1978.2.10.1.3.1 | RowalcCuEntry | not-accessible | mandatory | An entry containing information applicable to a particular ALC line. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.1 | ColumnalcCuIfIndex | read-write | mandatory | The line interface identifier that can be used to locate this IA. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.2 | ColumnalcCuDescr | read-write | mandatory | Name of this control unit. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.3 | ColumnalcCuIA | read-write | mandatory | this control units IA |
| 1.3.6.1.4.1.1978.2.10.1.3.1.4 | ColumnalcCuStatus | read-only | mandatory | What is this control units current status. enabledUp: responding to polls, enabledDown: not responding to polls. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.5 | ColumnalcCuPollCmd | read-write | mandatory | Mode Function Primary Should we be polling this CU? enabled - polling & forwarding data, disabled - not polling & not forwarding. cascade - not polling but for… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.6 | ColumnalcCuOutQueueMsgSize | read-write | mandatory | (1..100 messages) default=xx Defines the size of the queue (in messages) that holds outgoing messages (Port bound). UNITS: messages |
| 1.3.6.1.4.1.1978.2.10.1.3.1.7 | ColumnalcCuOutQueueCharSize | read-write | mandatory | (1..xx characters) default=xx Defines the size of the queue (in characters) that holds outgoing messages (Port bound). UNITS: characters |
| 1.3.6.1.4.1.1978.2.10.1.3.1.8 | ColumnalcCuN1MaxMsgSize | read-write | mandatory | (1..xx characters) default=960 Maximum length of a single message. UNITS: characters |
| 1.3.6.1.4.1.1978.2.10.1.3.1.9 | ColumnalcCuT1PollRspTimer | read-write | mandatory | Poll response timeout (default = 200 millisec) (PRIMARY) No response to a poll was received before this timeout. UNITS: milliseconds |
| 1.3.6.1.4.1.1978.2.10.1.3.1.10 | ColumnalcCuT2MaxRxTimer | read-write | mandatory | (1..65 seconds) default=5 (PRIMARY) Timeout to ensure that the received messages are not overlength. Typically started at: start of poll, or receipt of first c… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.11 | ColumnalcCuT4NoPollTime | read-write | mandatory | No polls received within this time. (default = 3000 millisecs) (SECONDARY) UNITS: milliseconds |
| 1.3.6.1.4.1.1978.2.10.1.3.1.12 | ColumnalcCuC1UpCounter | read-write | mandatory | Number of answered DEAD polls to declare a CU up. (default=1) (PRIMARY only) Equivalent to the secondary variable: alcCuN3PollsTillAlive UNITS: polls |
| 1.3.6.1.4.1.1978.2.10.1.3.1.13 | ColumnalcCuC2DownCounter | read-write | mandatory | Number of missed LIVE polls to declare a CU down. (default=3) (PRIMARY only) Equivalent to the secondary variable: alcN4PollsTillDead. UNITS: polls |
| 1.3.6.1.4.1.1978.2.10.1.3.1.14 | ColumnalcCuN2MaxMsgPerPoll | read-write | mandatory | maximum number of messages which can be sent to the ACS per POLL. (SECONDARY - multidrop, default=10) UNITS: messages |
| 1.3.6.1.4.1.1978.2.10.1.3.1.15 | ColumnalcCuMaxCharPerPoll | read-write | mandatory | maximum number of characters which can be sent to the ACS per POLL. (default=xx) (SECONDARY) UNITS: characters |
| 1.3.6.1.4.1.1978.2.10.1.3.1.16 | ColumnalcCuN3PollsTillAlive | read-write | mandatory | number of consecutive POLL commands to declare the CU/circuit available. (SECONDARY) Equivalent to the primary variable: alcC1UpCounter. UNITS: polls |
| 1.3.6.1.4.1.1978.2.10.1.3.1.17 | ColumnalcCuN4PollsTillDead | read-write | mandatory | number of consecutive polling time-outs to declare the CU unavailable. (SECONDARY) Equivalent to the primary variable: alcC2DownCounter. UNITS: polls |
| 1.3.6.1.4.1.1978.2.10.1.3.1.18 | ColumnalcCuIAResetOption | read-write | mandatory | IA reset message is sent when the IA comes alive. (PRIMARY) The message is sent to the polled IA. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.19 | ColumnalcCuIAValidationOption | read-write | mandatory | IA Validation: possibly two CUs responding to the same address (PRIMARY) This flag is used with respect to the pollers point of view. none - the message is for… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.20 | ColumnalcCuRxCCCOption | read-write | mandatory | (PRIMARY) a) <null> entry means no is message sent b) default is preconfigured IA Resend message '<CMD1>=0x1F, <CMD2>=0x38,<EOMc>' c) user can enter their own … |
| 1.3.6.1.4.1.1978.2.10.1.3.1.21 | ColumnalcCuMaxFrame | read-write | mandatory | Number of messages allowed to be sent to a given CU before having to poll all the other CUs on the line (default: 0 = disabled) UNITS: messages |
| 1.3.6.1.4.1.1978.2.10.1.3.1.22 | ColumnalcCuSvcMsgHeader | read-write | mandatory | The is is the header that is sent out whenever the protocol module determines the need to send a service message. This prefix is in the native character set of… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.23 | ColumnalcCuSvcMsgIndex | read-write | mandatory | This provides the index into the service message table: 'svcmsgTable'. If this index is non-zero, the protocol (when it determines a message is required) will … |
| 1.3.6.1.4.1.1978.2.10.1.3.1.24 | ColumnalcCuSvcMsgTrailer | read-write | mandatory | This is the trailer sent whenever a service message is sent. It is in the native character set of the protocol. It is only used if the value of alcCuSvcMsgInde… |
| 1.3.6.1.4.1.1978.2.10.1.3.1.25 | ColumnalcCuStatusChanges | read-only | mandatory | A count of the number of times: a) no response to a live poll was received (PRIMARY), b) CU had polling stopped due to T1 timeouts. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.26 | ColumnalcCuRxFrames | read-only | mandatory | A count of the number of frames received for this CU. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.27 | ColumnalcCuTxFrames | read-only | mandatory | A count of the number of frames sent to this CU. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.28 | ColumnalcCuRxChars | read-only | mandatory | A count of the number of characters received from the CU. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.29 | ColumnalcCuTxChars | read-only | mandatory | A count of the number of characters sent to the CU. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.30 | ColumnalcCuStatusTrapControl | read-write | mandatory | If enabled, it allows the system to generate alcCuState traps, when the CU's status (alcCuStatus) changes to enabled-up, and enabled-down respectively. |
| 1.3.6.1.4.1.1978.2.10.1.3.1.31 | ColumnalcCuDropped | read-only | mandatory | A count of the number of messages dropped due message sent which is not being acknowledged by the CU. |
| 1.3.6.1.4.1.1978.2.10.2 | NodealcTraps | |||
| 1.3.6.1.4.1.1978.2.10.2.1 | NodealcLineTraps | |||
| 1.3.6.1.4.1.1978.2.10.2.1.1 | NodealcLineError | This trap signifies that one of the thresholds has been exceeded. refer to 'alcTrapReason' for the actual cause. | ||
| 1.3.6.1.4.1.1978.2.10.2.2 | NodealcCuTraps | |||
| 1.3.6.1.4.1.1978.2.10.2.2.1 | NodealcCuState | A trap that indicates that the Cu has changed state. When alcCuStatus is: enabledUp - the CU has exceeded the alcCuC1UpCounter and is now declared up. enabledD… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InterfaceIndex | INTEGER | ||
| NonNegativeInteger | INTEGER (0..2147483647) |