ARICENT-MEF-MIB
235 objects
This MIB is a proprietary MIB and defined to provide support for MEF 6.1 and 10.2 specification view.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29601.2.71 | Identityfsmef | This MIB is a proprietary MIB and defined to provide support for MEF 6.1 and 10.2 specification view. | ||
| 1.3.6.1.4.1.29601.2.71.1 | NodefsMefContext | |||
| 1.3.6.1.4.1.29601.2.71.1.1 | TablefsMefContextTable | not-accessible | current | This table contains list of per virtual context MEF module parameters. |
| 1.3.6.1.4.1.29601.2.71.1.1.1 | RowfsMefContextEntry | not-accessible | current | Each entry contains virtual context MEF module parameters. |
| 1.3.6.1.4.1.29601.2.71.1.1.1.1 | ColumnfsMefContextId | not-accessible | current | This object specifies the virtual context in the system. |
| 1.3.6.1.4.1.29601.2.71.1.1.1.2 | ColumnfsMefContextName | read-only | current | This object specifies the Name of the virtual context. |
| 1.3.6.1.4.1.29601.2.71.1.1.1.3 | ColumnfsMefTransmode | read-write | current | The object defines under lying transport mode dot1ad - Provider Bridge as transport mode mplspw - MPLS cloud as transport mode. |
| 1.3.6.1.4.1.29601.2.71.1.1.1.4 | ColumnfsMefFrameLossBufferClear | read-write | current | This object is used to remove the contents of buffer maintained for storing frame-loss measured at various times. Note: Get operation value should be ignored. |
| 1.3.6.1.4.1.29601.2.71.1.1.1.5 | ColumnfsMefFrameDelayBufferClear | read-write | current | This object is used to remove the contents of buffer maintained for storing frame-delay measured at various times. Note: Get operation value should be ignored. |
| 1.3.6.1.4.1.29601.2.71.1.1.1.6 | ColumnfsMefFrameLossBufferSize | read-write | current | This object specifies the maximum number of entries for the Frame Loss Buffer. |
| 1.3.6.1.4.1.29601.2.71.1.1.1.7 | ColumnfsMefFrameDelayBufferSize | read-write | current | This object specifies the maximum number of entries for the Frame Delay Buffer. |
| 1.3.6.1.4.1.29601.2.71.2 | NodefsMefUni | |||
| 1.3.6.1.4.1.29601.2.71.2.1 | TablefsUniTable | not-accessible | current | This table contains list of the UNIs configured on the system. |
| 1.3.6.1.4.1.29601.2.71.2.1.1 | RowfsUniEntry | not-accessible | current | This entry represents UNI and its service attributes. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.1 | ColumnfsUniId | read-write | current | The UNI identifier is independent of the EVCs at the UNI. It is assigned to the UNI by the service provider. It must be a string and the string may have any va… |
| 1.3.6.1.4.1.29601.2.71.2.1.1.2 | ColumnfsUniPhysicalMedium | read-only | current | It always return ethernetCsmacd (6). |
| 1.3.6.1.4.1.29601.2.71.2.1.1.3 | ColumnfsUniSpeed | read-only | current | Speed is bits per second. It is dependent on the ethernet type. The speed should be one of the give below. - 10 Mbps - 100 Mbps - 10 or 100 Mbps Auto Negotiati… |
| 1.3.6.1.4.1.29601.2.71.2.1.1.4 | ColumnfsUniMode | read-only | current | This mode defines the type of communication between the CE and UNI. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.5 | ColumnfsUniMacLayer | read-only | current | It should return IEEE 802.3 - 2005. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.6 | ColumnfsUniMtu | read-only | current | This object specifies the size of the largest packet which can be sent and received on the interface, specified in octets. For interfaces that are used for tra… |
| 1.3.6.1.4.1.29601.2.71.2.1.1.7 | ColumnfsUniServiceMultiplexingBundling | read-write | current | This object specifies the UNI service attributes. service-Multiplexing : This bit specifies whether the UNI supports multiple EVCs. Point-to-Point EVCs and Mul… |
| 1.3.6.1.4.1.29601.2.71.2.1.1.8 | ColumnfsUniCVlanId | read-write | current | This object specifies a 12-bit UNI CE-VID to be used for untagged frames received. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.9 | ColumnfsUniMaxEvcs | read-only | current | This attribute defines the maximum number of EVCs that the UNI can support. It must have at least one value. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.10 | ColumnfsUniL2CPDot1x | read-write | current | The object to specify whether to discard or peer or tunnel the Dot1x packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.11 | ColumnfsUniL2CPLacp | read-write | current | The object to specify whether to discard or peer or tunnel the LACP packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.12 | ColumnfsUniL2CPStp | read-write | current | The object to specify whether to discard or peer or tunnel the STP packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.13 | ColumnfsUniL2CPGvrp | read-write | current | The object to specify whether to discard or peer or tunnel the GVRP packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.14 | ColumnfsUniL2CPGmrp | read-write | current | The object to specify whether to discard or peer or tunnel the GMRP packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.15 | ColumnfsUniL2CPMvrp | read-write | current | The object to specify whether to discard or peer or tunnel the MVRP packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.16 | ColumnfsUniL2CPMmrp | read-write | current | The object to specify whether to discard or peer or tunnel the MMRP packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.17 | ColumnfsUniL2CPLldp | read-write | current | The object to specify whether to discard or peer or tunnel the LLDP packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.18 | ColumnfsUniL2CPElmi | read-write | current | The object to specify whether to discard or peer or tunnel the ELMI packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.19 | ColumnfsUniRowStatus | read-create | current | Row Status for the UNI table. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.20 | ColumnfsUniL2CPEcfm | read-write | current | The object to specify whether to discard or peer or tunnel the ECFM packets received on this port. |
| 1.3.6.1.4.1.29601.2.71.2.1.1.21 | ColumnfsUniL2CPOverrideOption | read-write | current | This object specifies whether override option is enabled or disabled on the Port. If this option is set to enable, tunnel status for all the Layer 2 control pr… |
| 1.3.6.1.4.1.29601.2.71.2.1.1.22 | ColumnfsUniL2CPEoam | read-write | current | This object specifies whether to discard or peer or tunnel the EOAM packets received on the port. |
| 1.3.6.1.4.1.29601.2.71.2.2 | TablefsMefUniListTable | not-accessible | current | The Uni List for an EVC is a list of pairs containing <UNI Identifier, UNI Type> This list must have exactly one such pair for each UNI in the EVC. |
| 1.3.6.1.4.1.29601.2.71.2.2.1 | RowfsMefUniListEntry | not-accessible | current | The MEF Uni List Table entry |
| 1.3.6.1.4.1.29601.2.71.2.2.1.1 | ColumnfsMefUniId | read-only | current | The UNI Identifier is independent of the EVCs at the UNI. It is assigned to the UNI by the Service Provider. It must be a string and the string may have any va… |
| 1.3.6.1.4.1.29601.2.71.2.2.1.2 | ColumnfsMefUniType | read-write | current | The UNI Type must have the value either Root or Leaf. If the type of EVC is point-to-point or Multipoint-to-Multipoint, then the UNI Type must equal Root. |
| 1.3.6.1.4.1.29601.2.71.2.2.1.3 | ColumnfsMefUniListRowStatus | read-create | current | Row Status for the UNI List table. |
| 1.3.6.1.4.1.29601.2.71.3 | NodefsEvc | |||
| 1.3.6.1.4.1.29601.2.71.3.1 | TablefsEvcTable | not-accessible | current | This table contains list of the EVCs locally configured on the system. |
| 1.3.6.1.4.1.29601.2.71.3.1.1 | RowfsEvcEntry | not-accessible | current | This entry represents EVC and its attributes. |
| 1.3.6.1.4.1.29601.2.71.3.1.1.1 | ColumnfsEvcContextId | not-accessible | current | Identifies the Virtual Bridge Context. |
| 1.3.6.1.4.1.29601.2.71.3.1.1.2 | ColumnfsEvcIndex | not-accessible | current | This object indicates service provider VLAN (S-VLAN) if value is less than 4094. If the value is greater than 4094, this object indicates VFI. |
| 1.3.6.1.4.1.29601.2.71.3.1.1.3 | ColumnfsEvcId | read-write | current | An arbitrary string, unique across the MEN, for the EVC supporting the service instance. |
| 1.3.6.1.4.1.29601.2.71.3.1.1.4 | ColumnfsEvcType | read-write | current | There are three type of EVC. Point-to-Point : In a Point-to-Point EVC (E-Line), exactly two UNIs must be associated with one another. Multipoint-to-Multipoint … |
| 1.3.6.1.4.1.29601.2.71.3.1.1.5 | ColumnfsEvcMaxUni | read-only | current | The object specifies the maximum number of UNIs (MNU) service attribute specifies the maximum number of UNIs allowed in the UNI list service attribute. For a P… |
| 1.3.6.1.4.1.29601.2.71.3.1.1.6 | ColumnfsEvcCVlanIdPreservation | read-write | current | An EVC attribute in which the CE-VLAN ID of an egress Service Frame is identical to the CE-VLAN ID of the corresponding ingress Service Frame. If set to true, … |
| 1.3.6.1.4.1.29601.2.71.3.1.1.7 | ColumnfsEvcCVlanCoSPreservation | read-write | current | In an EVC with CE-VLAN CoS Preservation set (true), an egress Service Frame resulting from an ingress Service Frame that contains a CE-VLAN CoS must have the i… |
| 1.3.6.1.4.1.29601.2.71.3.1.1.8 | ColumnfsEvcRowStatus | read-create | current | Row Status for the UNI table. |
| 1.3.6.1.4.1.29601.2.71.3.1.1.9 | ColumnfsEvcMtu | read-only | current | The size of the largest packet which can be allowed on the EVC, specified in octets. For interfaces connected to the EVC, they must be capable of supporting th… |
| 1.3.6.1.4.1.29601.2.71.3.1.1.10 | ColumnfsEvcL2CPTunnel | read-write | current | This object specifies the tunnel status of the protocol configured as TUNNEL on the EVC. |
| 1.3.6.1.4.1.29601.2.71.3.1.1.11 | ColumnfsEvcL2CPPeer | read-write | current | This object specifies the tunnel status of the protocol configured as PEER on the EVC. |
| 1.3.6.1.4.1.29601.2.71.3.1.1.12 | ColumnfsEvcL2CPDiscard | read-write | current | This object specifies the tunnel status of the protocol configured as DISCARD on the EVC. |
| 1.3.6.1.4.1.29601.2.71.3.1.1.13 | ColumnfsEvcLoopbackStatus | read-write | current | This object specifies the loopback status of the EVC. |
| 1.3.6.1.4.1.29601.2.71.3.2 | TablefsEvcFilterTable | not-accessible | current | This table contains list of the EVC's Unicast, Multicast frame delivery conditions. Service Frame received on EVC can be discarded, deliver unconditionally or … |
| 1.3.6.1.4.1.29601.2.71.3.2.1 | RowfsEvcFilterEntry | not-accessible | current | This entry represents EVC's one of the frame delivery conditions. |
| 1.3.6.1.4.1.29601.2.71.3.2.1.1 | ColumnfsEvcFilterInstance | not-accessible | current | If multiple conditions are mapped to the same EVC, this index is used to uniquely identify the individual row. |
| 1.3.6.1.4.1.29601.2.71.3.2.1.2 | ColumnfsEvcFilterDestMacAddress | read-write | current | This object specifies the Destination MAC address to be matched with the service frame Destination MAC address. If service frame delivery condition is drop, th… |
| 1.3.6.1.4.1.29601.2.71.3.2.1.3 | ColumnfsEvcFilterAction | read-write | current | Specifies the action to be taken on the service frame. |
| 1.3.6.1.4.1.29601.2.71.3.2.1.4 | ColumnfsEvcFilterId | read-write | current | Specifies the filter number. This filter id should be unique across the EVCs and virtual contexts. |
| 1.3.6.1.4.1.29601.2.71.3.2.1.5 | ColumnfsEvcFilterRowStatus | read-create | current | This object specifies the Row Status for the EVC filter table. |
| 1.3.6.1.4.1.29601.2.71.4 | NodefsMefETree | |||
| 1.3.6.1.4.1.29601.2.71.4.1 | TablefsMefETreeTable | not-accessible | current | This table is used to configure the E-Tree feature. |
| 1.3.6.1.4.1.29601.2.71.4.1.1 | RowfsMefETreeEntry | not-accessible | current | Each entry in this table gives a ingress port to egress port mapping. |
| 1.3.6.1.4.1.29601.2.71.4.1.1.1 | ColumnfsMefETreeIngresPort | not-accessible | current | This object specifies the ingress port ifIndex. |
| 1.3.6.1.4.1.29601.2.71.4.1.1.2 | ColumnfsMefETreeEvcIndex | not-accessible | current | This object specifies the EVC on which E-Tree service to be configured. |
| 1.3.6.1.4.1.29601.2.71.4.1.1.3 | ColumnfsMefETreeEgressPort | not-accessible | current | This object specifies one of the allowed egress ports for the given ingress port identified by the first index for this row. |
| 1.3.6.1.4.1.29601.2.71.4.1.1.4 | ColumnfsMefETreeRowStatus | read-create | current | This object specifies the row status for port E-Tree table entry. Only 'CreateAndGo' and 'destroy' values are allowed for this object. 'CreateAndWait' and 'not… |
| 1.3.6.1.4.1.29601.2.71.5 | NodefsUniCVlanEvc | |||
| 1.3.6.1.4.1.29601.2.71.5.1 | TablefsUniCVlanEvcTable | not-accessible | current | This table contains list of the CE-VLAN ID UNI ID mapped with EVC. |
| 1.3.6.1.4.1.29601.2.71.5.1.1 | RowfsUniCVlanEvcEntry | not-accessible | current | This object specifies UNI, CE-VLAN and EVC mapping. |
| 1.3.6.1.4.1.29601.2.71.5.1.1.1 | ColumnfsUniCVlanEvcCVlanId | not-accessible | current | This object specifies the CE-VLAN that needs to be mapped to the EVC. |
| 1.3.6.1.4.1.29601.2.71.5.1.1.2 | ColumnfsUniCVlanEvcEvcIndex | read-write | current | This object represents the EVC to which the CE-VLAN at the UNI to be mapped. |
| 1.3.6.1.4.1.29601.2.71.5.1.1.3 | ColumnfsUniCVlanEvcRowStatus | read-write | current | This object specifies the row status of an entry in this table, used to map/unmap CE-VLAN to EVC at the UNI and used to create and delete entries. |
| 1.3.6.1.4.1.29601.2.71.5.1.1.4 | ColumnfsUniEvcId | read-write | current | This is used to identify an EVC at the UNI and intended for management and control purposes. UNI EVC ID is for each EVC at the UNI. |
| 1.3.6.1.4.1.29601.2.71.6 | NodefsMefProfile | |||
| 1.3.6.1.4.1.29601.2.71.6.1 | TablefsMefFilterTable | not-accessible | current | This table is used to configure filter rule used by the classifier table. |
| 1.3.6.1.4.1.29601.2.71.6.1.1 | RowfsMefFilterEntry | not-accessible | current | This object specifies each entry in this table which is a filter rule. Index to the table is filter number. |
| 1.3.6.1.4.1.29601.2.71.6.1.1.1 | ColumnfsMefFilterNo | not-accessible | current | Filter rule number. |
| 1.3.6.1.4.1.29601.2.71.6.1.1.2 | ColumnfsMefFilterDscp | read-create | current | This object specifies the IP DSCP value to be checked against the packet. This object is configured when CoS ID section is based on the DSCP. A value of '-1' m… |
| 1.3.6.1.4.1.29601.2.71.6.1.1.3 | ColumnfsMefFilterDirection | read-write | current | This object specifies the direction of this filter to be applied. By Default, the filter will be applied on ingress direction. When the direction of this filte… |
| 1.3.6.1.4.1.29601.2.71.6.1.1.4 | ColumnfsMefFilterEvc | read-write | current | This object specifies the EVC for which the bandwidth profiles to be configured based. This also represents the CoS identifier selection based on the EVC. |
| 1.3.6.1.4.1.29601.2.71.6.1.1.5 | ColumnfsMefFilterCVlanPriority | read-write | current | This object specifies the Customer Vlan priority present in traffic. This object is configured when CoS ID section is based on the priority code point field of… |
| 1.3.6.1.4.1.29601.2.71.6.1.1.6 | ColumnfsMefFilterIfIndex | read-write | current | This Object represents the UNI on which the filter should be applied. |
| 1.3.6.1.4.1.29601.2.71.6.1.1.7 | ColumnfsMefFilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.29601.2.71.6.2 | TablefsMefClassMapTable | not-accessible | current | This table contains the Multifield Classifier details. It takes input from the table fsMefFilterTable and outputs a CLASS for the traffic-class pattern/match. |
| 1.3.6.1.4.1.29601.2.71.6.2.1 | RowfsMefClassMapEntry | not-accessible | current | This object specifies a Multi-field Classifier entry maps fsMefFilterTable to a CLASS. |
| 1.3.6.1.4.1.29601.2.71.6.2.1.1 | ColumnfsMefClassMapId | not-accessible | current | An index that enumerates the MultiField Classifier table. |
| 1.3.6.1.4.1.29601.2.71.6.2.1.2 | ColumnfsMefClassMapName | read-write | current | This object indicates the name for the classmap Entry. |
| 1.3.6.1.4.1.29601.2.71.6.2.1.3 | ColumnfsMefClassMapFilterId | read-write | current | This Object specifies the index of the fsMefFilterTable, the details of which should be matched against the incoming packet. |
| 1.3.6.1.4.1.29601.2.71.6.2.1.4 | ColumnfsMefClassMapCLASS | read-write | current | This represents the traffic CLASS to which an incoming frame pattern is classified. The administrator needs to define the logical groups that represent this CL… |
| 1.3.6.1.4.1.29601.2.71.6.2.1.5 | ColumnfsMefClassMapStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. CreateAndGo not allowed, it can be … |
| 1.3.6.1.4.1.29601.2.71.6.3 | TablefsMefClassTable | not-accessible | current | This table assigns is provided for easy mapping of CLASS policymap and class map tables. |
| 1.3.6.1.4.1.29601.2.71.6.3.1 | RowfsMefClassEntry | not-accessible | current | This object specifies an entry that specifies CLASS used to map policy map and class map tables. |
| 1.3.6.1.4.1.29601.2.71.6.3.1.1 | ColumnfsMefClassCLASS | not-accessible | current | This object specifies the traffic CLASS to which an incoming frame pattern is classified. The administrator needs to define the traffic class patterns that rep… |
| 1.3.6.1.4.1.29601.2.71.6.3.1.2 | ColumnfsMefClassStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified only when the row status is not active. It can be deleted 'destroy', only i… |
| 1.3.6.1.4.1.29601.2.71.6.4 | TablefsMefMeterTable | not-accessible | current | This table enumerates specific meters that a system may use to police a stream of traffic. This may include all traffic on an interface. |
| 1.3.6.1.4.1.29601.2.71.6.4.1 | RowfsMefMeterEntry | not-accessible | current | An entry in the meter table describes a single conformance level of a meter. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.1 | ColumnfsMefMeterId | not-accessible | current | This object specifies an index that enumerates the meter entries. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.2 | ColumnfsMefMeterName | read-write | current | This object specifies the name for the meter entry. It should be unique in this table. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.3 | ColumnfsMefMeterType | read-write | current | This object specifies the metering algorithm associated with the Token Bucket meter. It supports only mefDecoupledMeter(6), mefCoupledMeter(7) types. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.4 | ColumnfsMefMeterColorMode | read-write | current | The user defined Meter Color Mode. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.5 | ColumnfsMefMeterCIR | read-write | current | The committed information rate as per MEF. Must be >= 0. CIR must be less than or equal to EIR, if EIR > 0. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.6 | ColumnfsMefMeterCBS | read-write | current | The committed burst size as per MEF. Must be > 0 if CIR > 0. Maximum allowable size will be jumbo frame size. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.7 | ColumnfsMefMeterEIR | read-write | current | The excess information rate as per MEF. Must be >= 0. EIR must be greater than or equal to CIR, if EIR 0. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.8 | ColumnfsMefMeterEBS | read-write | current | The excess burst size as per MEF. Must be > 0 if EIR > 0. |
| 1.3.6.1.4.1.29601.2.71.6.4.1.9 | ColumnfsMefMeterStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified only if the entry is not ACTIVE. It can be deleted 'destroy', only if it is… |
| 1.3.6.1.4.1.29601.2.71.6.5 | TablefsMefPolicyMapTable | not-accessible | current | This table contains the class-map to policy-map mapping details. |
| 1.3.6.1.4.1.29601.2.71.6.5.1 | RowfsMefPolicyMapEntry | not-accessible | current | An entry to map a policy for a class-map. |
| 1.3.6.1.4.1.29601.2.71.6.5.1.1 | ColumnfsMefPolicyMapId | not-accessible | current | An index that enumerates the policy-map table entries. |
| 1.3.6.1.4.1.29601.2.71.6.5.1.2 | ColumnfsMefPolicyMapName | read-write | current | This is the name for a policy entry. It should be unique in this table. |
| 1.3.6.1.4.1.29601.2.71.6.5.1.3 | ColumnfsMefPolicyMapCLASS | read-write | current | This object specifies the traffic CLASS for which the policy-map needs to be applied. A valid value is not necessary for creation of an entry in this table. Wh… |
| 1.3.6.1.4.1.29601.2.71.6.5.1.4 | ColumnfsMefPolicyMapMeterTableId | read-write | current | The object specifies a meter table Id which is the index for the meter table. A valid value of this object is not mandatory for the creation of an entry in thi… |
| 1.3.6.1.4.1.29601.2.71.6.5.1.5 | ColumnfsMefPolicyMapStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.29601.2.71.7 | NodefsMefPerformance | |||
| 1.3.6.1.4.1.29601.2.71.7.1 | TablefsMefMepTable | not-accessible | current | The Maintenance Entity Group End Point (MEP) table. The indexes of the table fsMefContextId, fsMefMegIndex, fsMefMeIndex, fsMefMepIdentifier points to the fsMI… |
| 1.3.6.1.4.1.29601.2.71.7.1.1 | RowfsMefMepEntry | not-accessible | current | This object specifies the MEP table entry. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.1 | ColumnfsMefMegIndex | not-accessible | current | This object specifies the MIB object dot1agCfmMdIndex of ECFM and fsMIY1731MegIndex of Y1731. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.2 | ColumnfsMefMeIndex | not-accessible | current | This object specifies the MIB object dot1agCfmMaIndex of ECFM and fsMIY1731MeIndex of Y1731. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.3 | ColumnfsMefMepIdentifier | not-accessible | current | This object specifies MIB object dot1agCfmMepIdentifier of ECFM and fsMIY1731MepIdentifier of Y1731. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.4 | ColumnfsMefMepTransmitLmmStatus | read-write | current | This object specifies an enumerated value set to 'start' to initiate LM transmission and 'stop' to stop LM transmission. 'ready' and 'notReady' indicate whethe… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.5 | ColumnfsMefMepTransmitLmmResultOK | read-only | current | Indicates the result of the operation: - true The Loss measurement Message (LMM) will be (or has been) sent. - false The Loss measurement Message (LMM) will no… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.6 | ColumnfsMefMepTransmitLmmInterval | read-write | current | Interval between two successive LMM transmissions to be used by the MEP. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.7 | ColumnfsMefMepTransmitLmmDeadline | read-write | current | This object specifies a timeout, in seconds, before loss measurement exits. Loss measurement exits, if configured number of messages are sent before timeout. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.8 | ColumnfsMefMepTransmitLmmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.9 | ColumnfsMefMepTransmitLmmPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.10 | ColumnfsMefMepTransmitLmmDestMacAddress | read-write | current | This object specifies the target MAC Address Field to be transmitted: A unicast destination MAC address to be used for LMM. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.11 | ColumnfsMefMepTransmitLmmDestMepId | read-write | current | This object specifies an indication of the target MAC Address Field to be transmitted: The maintenance association end point identifier of another MEP in the s… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.12 | ColumnfsMefMepTransmitLmmDestIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for LM frame transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.13 | ColumnfsMefMepTransmitLmmMessages | read-write | current | This object specifies the number of LMM messages to be transmitted. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.14 | ColumnfsMefMepTxFCf | read-only | current | The counter of in-profile data frames transmitted towards its peer MEP transmitted in the last CCM or LMM. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.15 | ColumnfsMefMepRxFCb | read-only | current | The counter of in-profile data frames received from its peer MEP at the time of receiving the last CCM frame. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.16 | ColumnfsMefMepTxFCb | read-only | current | The value of fsMefMepTxFCf field in the last CCM or LMR frame received from its peer MEP. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.17 | ColumnfsMefMepNearEndFrameLossThreshold | read-write | current | Threshold value for the near-end frame loss. Notification is sent to Management Application if calculated near-end frame loss exceeds configured threshold. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.18 | ColumnfsMefMepFarEndFrameLossThreshold | read-write | current | Threshold value for the far-end frame loss. Notification is sent to Management Application if calculated far-end frame loss exceeds configured threshold. This … |
| 1.3.6.1.4.1.29601.2.71.7.1.1.19 | ColumnfsMefMepTransmitDmStatus | read-write | current | This object specifies an enumerated value set to 'start' to initiate 1DM or DMM transmission and 'stop' to stop 1DM or DMM transmission. 'ready' and 'notReady'… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.20 | ColumnfsMefMepTransmitDmResultOK | read-only | current | Indicates the result of the operation: - true The Delay measurement Message (1DM or DMM) will be (or has been) sent. - false The Delay measurement Message (1DM… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.21 | ColumnfsMefMepTransmitDmType | read-write | current | Type of delay measurement to be initiated: - oneWay(1) Measurement (by 1DM) is calculated at destination end. - twoWay(2) Measurement (by DMM-DMR) is calculate… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.22 | ColumnfsMefMepTransmitDmInterval | read-write | current | Interval between two successive DM messages (1DM or DMM) transmissions to be used by the MEP. This refers to the interval between frame pairs as mentioned in s… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.23 | ColumnfsMefMepTransmitDmMessages | read-write | current | This object specifies the number of DM (1DM or DMM) messages to be transmitted. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.24 | ColumnfsMefMepTransmitDmmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted DMM frame. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.25 | ColumnfsMefMepTransmit1DmDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted 1DM frame. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.26 | ColumnfsMefMepTransmitDmmPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted DMM frame. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.27 | ColumnfsMefMepTransmit1DmPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted 1DM frame. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.28 | ColumnfsMefMepTransmitDmDestMacAddress | read-write | current | This object specifies the target MAC address field to be transmitted: A unicast destination MAC address to be used for 1DM or DMM. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.29 | ColumnfsMefMepTransmitDmDestMepId | read-write | current | This object specifies an indication of the target MAC address field to be transmitted: The maintenance association end point identifier of another MEP in the s… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.30 | ColumnfsMefMepTransmitDmDestIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for Delay frame transmission. False indicates that unicast destination MAC address of the target MEP is use… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.31 | ColumnfsMefMepTransmitDmDeadline | read-write | current | This object specifies a timeout, in seconds, before delay measurement operation exits. Delay measurement operation exits, if configured number of messages are … |
| 1.3.6.1.4.1.29601.2.71.7.1.1.32 | ColumnfsMefMepDmrOptionalFields | read-write | current | This object specifies whether to include optional fields in the DMR frame or not. True indicates optional fields are to be included and False indicates optiona… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.33 | ColumnfsMefMep1DmRecvCapability | read-write | current | This object specifies the administrative status of 1DM frame reception. This enables or disables the capability of MEP to process the 1DM frames. A value of 'e… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.34 | ColumnfsMefMepFrameDelayThreshold | read-write | current | This object specifies the Threshold (in microseconds) for the frame delay. Notification is sent to management application if calculated frame delay exceeds con… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.35 | ColumnfsMefMepRowStatus | read-write | current | Indicates the status of MEP row. This object specifies the writable columns in a row cannot be changed if the row is active. All columns must have a valid valu… |
| 1.3.6.1.4.1.29601.2.71.7.1.1.36 | ColumnfsMefMepRxFCf | read-only | current | The value of fsMefMepRxFCf field is the value of in-profile data frames received from its peer MEP. |
| 1.3.6.1.4.1.29601.2.71.7.1.1.37 | ColumnfsMefMep1DmTransInterval | read-write | current | This object specifies the Time interval (in 0.01 seconds) between two successive one-way DM transactions and is used to carry out delay variation measurement f… |
| 1.3.6.1.4.1.29601.2.71.7.2 | TablefsMefFdTable | not-accessible | current | This table extends the MEP table and contains a list of information about the frame delay measured at various times by a MEP. Size of this table is defined by … |
| 1.3.6.1.4.1.29601.2.71.7.2.1 | RowfsMefFdEntry | not-accessible | current | This object specifies the frame delay buffer table entry. |
| 1.3.6.1.4.1.29601.2.71.7.2.1.1 | ColumnfsMefFdTransId | not-accessible | current | This object specifies a delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.71.7.2.1.2 | ColumnfsMefFdSeqNumber | not-accessible | current | This object specifies the locally maintained sequence number of FD entries. |
| 1.3.6.1.4.1.29601.2.71.7.2.1.3 | ColumnfsMefFdTxTimeStampf | read-only | current | TxTimeStampf value sent in a delay measurement message (DMM). or received in 1DM frame. |
| 1.3.6.1.4.1.29601.2.71.7.2.1.4 | ColumnfsMefFdMeasurementTimeStamp | read-only | current | Time at which measurement takes place. |
| 1.3.6.1.4.1.29601.2.71.7.2.1.5 | ColumnfsMefFdPeerMepMacAddress | read-only | current | THis object specifies the Mac address of the peer MEP to which DM message(s) is sent. |
| 1.3.6.1.4.1.29601.2.71.7.2.1.6 | ColumnfsMefFdIfIndex | read-only | current | This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which meas… |
| 1.3.6.1.4.1.29601.2.71.7.2.1.7 | ColumnfsMefFdDelayValue | read-only | current | This object contains the measured frame delay value. This refers to one way frame delay mentioned in section 6.9.2 of MEF 10.2 standard. |
| 1.3.6.1.4.1.29601.2.71.7.2.1.8 | ColumnfsMefFdIFDV | read-only | current | Inter frame delay variation, (IFDV), calculated with respect to current transaction. This refers to inter frame delay variation mentioned in section 6.9.4 of M… |
| 1.3.6.1.4.1.29601.2.71.7.2.1.9 | ColumnfsMefFdFDV | read-only | current | Frame delay variation, (IFDV), calculated with respect to current transaction. |
| 1.3.6.1.4.1.29601.2.71.7.2.1.10 | ColumnfsMefFdMeasurementType | read-only | current | This object specifies the Type of the frame-delay measurement (oneWay or twoWay). |
| 1.3.6.1.4.1.29601.2.71.7.3 | TablefsMefFdStatsTable | not-accessible | current | This table extends the MEP table and contains output of one-way and two-way delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.71.7.3.1 | RowfsMefFdStatsEntry | not-accessible | current | This object specifies the delay statistics table entry. |
| 1.3.6.1.4.1.29601.2.71.7.3.1.1 | ColumnfsMefFdStatsTimeStamp | read-only | current | Time stamp at which one-way or two-way delay measurement (DMM) is initiated. |
| 1.3.6.1.4.1.29601.2.71.7.3.1.2 | ColumnfsMefFdStatsDmmOut | read-only | current | Number of DMMs sent for a two-way delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.71.7.3.1.3 | ColumnfsMefFdStatsDmrIn | read-only | current | Number of requests received for a one-way or responses received for two-way delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.71.7.3.1.4 | ColumnfsMefFdStatsDelayAverage | read-only | current | Average delay measured for a one-way or two-way delay measurement transaction. This refers to one way mean delay of section 6.9.2 of MEF 10.2. |
| 1.3.6.1.4.1.29601.2.71.7.3.1.5 | ColumnfsMefFdStatsFDVAverage | read-only | current | Frame Delay Variation (FDV) average calculated for a delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.71.7.3.1.6 | ColumnfsMefFdStatsIFDVAverage | read-only | current | Inter Frame Delay Variation (IFDV) average calculated for delay measurement transaction. |
| 1.3.6.1.4.1.29601.2.71.7.3.1.7 | ColumnfsMefFdStatsDelayMin | read-only | current | This object contains the minimum value of frame-delay. |
| 1.3.6.1.4.1.29601.2.71.7.3.1.8 | ColumnfsMefFdStatsDelayMax | read-only | current | This object contains the maximum value of frame-delay. |
| 1.3.6.1.4.1.29601.2.71.7.4 | TablefsMefFlTable | not-accessible | current | This table extends the MEP table and contains information about the frame-loss measured at various times by a MEP. Size of this table is defined by the object … |
| 1.3.6.1.4.1.29601.2.71.7.4.1 | RowfsMefFlEntry | not-accessible | current | The frame loss statistics table entry. |
| 1.3.6.1.4.1.29601.2.71.7.4.1.1 | ColumnfsMefFlTransId | not-accessible | current | This object specifies a loss measurement transaction. |
| 1.3.6.1.4.1.29601.2.71.7.4.1.2 | ColumnfsMefFlSeqNumber | not-accessible | current | This object specifies the Locally maintained sequence number of frame loss entries |
| 1.3.6.1.4.1.29601.2.71.7.4.1.3 | ColumnfsMefFlMeasurementTimeStamp | read-only | current | This object specifies the Time at which frame-loss is actually measured. |
| 1.3.6.1.4.1.29601.2.71.7.4.1.4 | ColumnfsMefFlPeerMepMacAddress | read-only | current | This object specifies the Mac address of the peer MEP to which loss measurement message(s) is sent. |
| 1.3.6.1.4.1.29601.2.71.7.4.1.5 | ColumnfsMefFlIfIndex | read-only | current | This object is the interface index of the interface which is either a bridge port, or an aggregated IEEE 802.1 link within a bridge port to which the MEP at wh… |
| 1.3.6.1.4.1.29601.2.71.7.4.1.6 | ColumnfsMefFlFarEndLoss | read-only | current | This object contains the far-end frame-loss value. |
| 1.3.6.1.4.1.29601.2.71.7.4.1.7 | ColumnfsMefFlNearEndLoss | read-only | current | This object contains the near-end frame-loss value. |
| 1.3.6.1.4.1.29601.2.71.7.4.1.8 | ColumnfsMefFlMeasurementTime | read-only | current | This object specifies the Time taken to measure frame-loss. |
| 1.3.6.1.4.1.29601.2.71.7.5 | TablefsMefFlStatsTable | not-accessible | current | This table extends the MEP table and contains output of frame-loss measurement transaction. |
| 1.3.6.1.4.1.29601.2.71.7.5.1 | RowfsMefFlStatsEntry | not-accessible | current | This object specifies the frame loss statistics table entry. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.1 | ColumnfsMefFlStatsTimeStamp | read-only | current | This object specifies the Time stamp at which frame-loss measurement transaction is initiated. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.2 | ColumnfsMefFlStatsMessagesOut | read-only | current | This object specifies the Number of frames with ETH-LM information sent for a transaction. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.3 | ColumnfsMefFlStatsMessagesIn | read-only | current | Number of frames with ETH-LM information received for a transaction. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.4 | ColumnfsMefFlStatsFarEndLossAverage | read-only | current | This object specifies the average of the far-end frame-loss measured for a transaction. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.5 | ColumnfsMefFlStatsNearEndLossAverage | read-only | current | This object specifies average of the near-end frame-loss measured for a transaction. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.6 | ColumnfsMefFlStatsMeasurementType | read-only | current | This object specifies the type of the frame-loss measurement (Single-ended or Dual-ended) done. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.7 | ColumnfsMefFlStatsFarEndLossMin | read-only | current | This object contains the minimum value of far-end frame-loss. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.8 | ColumnfsMefFlStatsFarEndLossMax | read-only | current | This object contains the maximum value of far-end frame-loss. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.9 | ColumnfsMefFlStatsNearEndLossMin | read-only | current | This object contains the minimum value of near-end frame-loss. |
| 1.3.6.1.4.1.29601.2.71.7.5.1.10 | ColumnfsMefFlStatsNearEndLossMax | read-only | current | This object contains the maximum value of near-end frame-loss. |
| 1.3.6.1.4.1.29601.2.71.7.6 | TablefsMefMepAvailabilityTable | not-accessible | current | The Maintenance Entity Group End Point (MEP) Availability table. Each row in the table is associated with a different MEP. This table uses three indices. The f… |
| 1.3.6.1.4.1.29601.2.71.7.6.1 | RowfsMefMepAvailabilityEntry | not-accessible | current | This object specifies the MEP Availability table entry. |
| 1.3.6.1.4.1.29601.2.71.7.6.1.1 | ColumnfsMefMepAvailabilityStatus | read-write | current | This object specifies an enumerated value set to 'start' to initiate Availability Measurement and 'stop' to stop availability measurement. 'ready' and 'notRead… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.2 | ColumnfsMefMepAvailabilityResultOK | read-only | current | Indicates the result of the operation: - true Initiating Availability measurement by sending LM Message (LMM) is successful. - false Initiating Availability me… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.3 | ColumnfsMefMepAvailabilityInterval | read-write | current | This object specifies A time interval much smaller than deadline. Interval between two successive LMM transmissions to be used by the MEP for calculating avail… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.4 | ColumnfsMefMepAvailabilityDeadline | read-write | current | This object specifies a timeout, in seconds, the time interval to conduct the availability functionality. |
| 1.3.6.1.4.1.29601.2.71.7.6.1.5 | ColumnfsMefMepAvailabilityLowerThreshold | read-write | current | Availability frame loss ratio threshold, the lower threshold used to define an interval as available. If far-end loss ratio is lesser than configured lower thr… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.6 | ColumnfsMefMepAvailabilityUpperThreshold | read-write | current | Unavailability frame loss ratio threshold, the upper threshold to define an interval as unavailable. If far-end loss ratio is greater than configured upper thr… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.7 | ColumnfsMefMepAvailabilityModestAreaIsAvailable | read-write | current | Defines whether the area between upper and lower threshold is referred as available or unavailable. True - If Calculated Frame loss ratio falls between upper a… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.8 | ColumnfsMefMepAvailabilityWindowSize | read-write | current | This object specifies the Number of consecutive small time intervals for assessing availability. |
| 1.3.6.1.4.1.29601.2.71.7.6.1.9 | ColumnfsMefMepAvailabilityDestMacAddress | read-write | current | This object specifies the target MAC address field to be transmitted: A unicast destination MAC address to be used for availability measurement. |
| 1.3.6.1.4.1.29601.2.71.7.6.1.10 | ColumnfsMefMepAvailabilityDestMepId | read-write | current | This object specifies an indication of the target MAC address field to be transmitted: The Maintenance association End Point Identifier of another MEP in the s… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.11 | ColumnfsMefMepAvailabilityDestIsMepId | read-write | current | True indicates that MEPID of the target MEP is used for LMM transmission during availability measurement. False indicates that unicast destination MAC address … |
| 1.3.6.1.4.1.29601.2.71.7.6.1.12 | ColumnfsMefMepAvailabilityType | read-write | current | defStatic indicates that the algorithm for availability measurement is static window algorithm. The availability measurement will be conducted as per MEF 10.2 … |
| 1.3.6.1.4.1.29601.2.71.7.6.1.13 | ColumnfsMefMepAvailabilitySchldDownInitTime | read-write | current | Time when scheduled down time is initiated, denotes the beginning of time interval agreed upon by both the Subscriber and Service Provider during which a servi… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.14 | ColumnfsMefMepAvailabilitySchldDownEndTime | read-write | current | Time when Scheduled down time is ending, denotes the ending of time interval agreed upon by both the Subscriber and Service Provider during which a service may… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.15 | ColumnfsMefMepAvailabilityPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.29601.2.71.7.6.1.16 | ColumnfsMefMepAvailabilityDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame. |
| 1.3.6.1.4.1.29601.2.71.7.6.1.17 | ColumnfsMefMepAvailabilityPercentage | read-only | current | This object contains the percentage of availability If fsMefMepAvailabilityType is selected as defStatic, this object contains the Availability Performance met… |
| 1.3.6.1.4.1.29601.2.71.7.6.1.18 | ColumnfsMefMepAvailabilityRowStatus | read-write | current | Indicates the status of MEP Availability Table row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value … |
| 1.3.6.1.4.1.29601.2.71.8 | NodefsEvcStatistics | |||
| 1.3.6.1.4.1.29601.2.71.8.1 | TablefsEvcStatsTable | not-accessible | current | The table contains the statistics on a per EVC basis. It contains number of unicast, broadcast and unknown unicast packets/bytes transmitted/received/dropped b… |
| 1.3.6.1.4.1.29601.2.71.8.1.1 | RowfsEvcStatsEntry | not-accessible | current | The object specifies the entry that contains the EVC statistics |
| 1.3.6.1.4.1.29601.2.71.8.1.1.1 | ColumnfsEvcStatsContextId | not-accessible | current | This object Identifies the Virtual Bridge Context. |
| 1.3.6.1.4.1.29601.2.71.8.1.1.2 | ColumnfsEvcStatsId | not-accessible | current | This object indicates service provider VLAN (S-VLAN) if value is less than 4094. If the value is greater than 4094 this object indicates VFI |
| 1.3.6.1.4.1.29601.2.71.8.1.1.3 | ColumnfsEvcStatsRxFrames | read-only | current | This object indicates the total number of unicast, multicast and broadcast packets received in the EVC. |
| 1.3.6.1.4.1.29601.2.71.8.1.1.4 | ColumnfsEvcStatsRxBytes | read-only | current | This object indicates the total number of unicast, multicast and broadcast bytes received in the EVC. |
| 1.3.6.1.4.1.29601.2.71.8.1.1.5 | ColumnfsEvcStatsTxFrames | read-only | current | This object indicates the total number of unicast, multicast and broadcast packets transmitted by the EVC. |
| 1.3.6.1.4.1.29601.2.71.8.1.1.6 | ColumnfsEvcStatsTxBytes | read-only | current | This object indicates the total number of unicast, multicast and broadcast bytes transmitted by the EVC. |
| 1.3.6.1.4.1.29601.2.71.8.1.1.7 | ColumnfsEvcStatsDiscardFrames | read-only | current | This object indicates the number of packets dropped by the EVC. |
| 1.3.6.1.4.1.29601.2.71.8.1.1.8 | ColumnfsEvcStatsDiscardBytes | read-only | current | This object indicates the number of bytes dropped by the EVC. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |
| FsEvcL2CPProtocol | BITS { fsEvcL2CPDot1x(0), fsEvcL2CPLacp(1), fsEvcL2CPStp(2), fsEvcL2CPGvrp(3), fsEvcL2CPGmrp(4), fsEvcL2CPIgmp(5), fsEvcL2CPMvrp(6), fsEvcL2CPMmrp(7), fsEvcL2CPElmi(8), fsEvcL2CPLldp(9), fsEvcL2CPEcfm(10), fsEvcL2CPEoam(11), fsEvcL2CPPtp(12) } | current | This object specifies the types of L2CP protocols. fsEvcL2CPDot1x(0) Specifies the DOT1X Protocol. fsEvcL2CPLacp(1) Specifies the LACP Protocol. fsEvcL2CPStp(2) Specifies the STP Protocol. fsEvcL2CPGvrp(3) Specifies the… |
| UniL2CPStatus | INTEGER { peer(1), tunnel(2), discard(3) } | current | This object specifies the action to be taken for the given layer 2 control protocol service frames. discard The port must discard all ingress service frames carrying the layer 2 control protocol service frames.:When thi… |