CM-GATEWAY-MIB
211 objects
This MIB defines additional gateway management objects that are extended based on CableHome MIBs.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166 | Nodegi | |||
| 1.3.6.1.4.1.1166.1 | Nodegiproducts | |||
| 1.3.6.1.4.1.1166.1.19 | Nodecm | |||
| 1.3.6.1.4.1.1166.1.19.52 | IdentitycmGw | This MIB defines additional gateway management objects that are extended based on CableHome MIBs. | ||
| 1.3.6.1.4.1.1166.1.19.52.1 | NodecmGwObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1 | NodecmGwBaseMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1.1 | ScalarcmGwWanMacAddress | read-only | current | The WAN MAC address. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.2 | ScalarcmGwWanSetToFactory | read-write | current | Setting this object to true(1) causes the WAN default options to be returned back to factory defaults. Reading this object always returns false(2). The followi… |
| 1.3.6.1.4.1.1166.1.19.52.1.1.3 | ScalarcmGwWanDhcpcAdminStatus | read-write | current | The object controls whether the WAN DHCP client in the device is enabled. If enabled, the device attempts to acquire network configuration from the network. If… |
| 1.3.6.1.4.1.1166.1.19.52.1.1.4 | ScalarcmGwWanInetAddressType | read-write | current | The address type assigned to the gateway WAN interface. When cmGwWanDhcpcAdminStatus is enabled, this object is read-only. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.5 | ScalarcmGwWanInetAddress | read-write | current | The address assigned to the gateway WAN interface. When cmGwWanDhcpcAdminStatus is enabled, this object is read-only. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.6 | ScalarcmGwWanHostName | read-write | current | The host name of the gateway WAN interface. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.7 | ScalarcmGwWanSubnetMaskType | read-write | current | The subnet mask address type assigned to the gateway WAN interface. When cmGwWanDhcpcAdminStatus is enabled, this object is read-only. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.8 | ScalarcmGwWanSubnetMask | read-write | current | The subnet mask address assigned to the gateway WAN interface. When cmGwWanDhcpcAdminStatus is enabled, this object is read-only. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.9 | ScalarcmGwWanRouterType | read-write | current | The router address type assigned to the gateway WAN interface. When cmGwWanDhcpcAdminStatus is enabled, this object is read-only. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.10 | ScalarcmGwWanRouter | read-write | current | The router address assigned to the gateway WAN interface. When cmGwWanDhcpcAdminStatus is enabled, this object is read-only. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.12 | TablecmGwWanDnsServerTable | not-accessible | current | When cmGwWanDhcpcAdminStatus is set to enabled, this contains the IP addresses used for the WAN DNS hosts obtained via the DHCP option 6 during the WAN interfa… |
| 1.3.6.1.4.1.1166.1.19.52.1.1.12.1 | RowcmGwWanDnsServerEntry | not-accessible | current | List of WAN DNS Hosts. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.12.1.1 | ColumncmGwWanAddrDnsServerOrder | not-accessible | current | The order of preference for Internet DNS servers, as listed in DHCP option 6 (Domain Server) or entered by a user through the GUI/NMS. Any time valid IP addres… |
| 1.3.6.1.4.1.1166.1.19.52.1.1.12.1.2 | ColumncmGwWanAddrDnsIpType | read-write | current | This parameter indicates the IP address type of a DNS server. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.12.1.3 | ColumncmGwWanAddrDnsIp | read-write | current | This parameter indicates the IP address of a DNS server. |
| 1.3.6.1.4.1.1166.1.19.52.1.1.12.1.4 | ColumncmGwWanAddrDnsRowStatus | read-create | current | The RowStatus interlock for creation and deletion. When cmGwWanDhcpcAdminStatus is enabled, this object is read-only. |
| 1.3.6.1.4.1.1166.1.19.52.1.2 | NodecmGwDhcpMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.2.1 | NodecmGwDhcpObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.1 | NodecmGwDhcpBase | |||
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.1.1 | ScalarcmGwLanDhcpsSetToFactory | read-write | current | Setting this object to true(1) causes the LAN DHCP server default options to be returned back to factory defaults and all current mappings to use the factory d… |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2 | NodecmGwDhcpServer | |||
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.1 | ScalarcmGwLanDhcpsAddressPoolStartType | read-write | current | The Address type of the start of range LAN IP Addresses. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.2 | ScalarcmGwLanDhcpsAddressPoolStart | read-write | current | The start of the range of LAN-side IP Addresses. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.3 | ScalarcmGwLanDhcpsNetworkNumberType | read-write | current | The IP address type of the LAN-Trans network number. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.4 | ScalarcmGwLanDhcpsNetworkNumber | read-write | current | The LAN-Trans network number. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.5 | ScalarcmGwLanDhcpsSubnetMaskType | read-write | current | Type of LAN-side Subnet Mask. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.6 | ScalarcmGwLanDhcpsSubnetMask | read-write | current | DHCP option value 1 - Value of LAN-side Subnet Mask. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.7 | ScalarcmGwLanDhcpsDomainName | read-write | current | DHCP option value 15 - Domain name of LAN-side address realm. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.8 | ScalarcmGwLanDhcpsTTL | read-write | current | DHCP option value 23 - LAN-side Time to Live. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.9 | ScalarcmGwLanDhcpsInterfaceMTU | read-write | current | DHCP option value 26 - LAN-side Interface MTU. If the value of this object is 0, the DHCP server must not include this option in its DHCP Offer or DHCP Ack mes… |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.10 | ScalarcmGwLanDhcpsLeaseTime | read-write | current | Option value 51 -Lease Time for LAN IP Devices on the LAN side. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.11 | ScalarcmGwLanDhcpsInetAddressType | read-write | current | DHCP option value 54 - Type of LAN-side DHCP server IP address. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.12 | ScalarcmGwLanDhcpsInetAddress | read-write | current | DHCP option value 54 - LAN-side DHCP server IP address. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.13 | ScalarcmGwLanDhcpsMaxAddressCount | read-write | current | The maximum number of LAN-side leased IP addresses. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.14 | ScalarcmGwLanDhcpsCurrentLeaseCount | read-only | current | The current number of LAN-side leased IP addresses. This is a count of LAN side addresses. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.15 | ScalarcmGwLanDhcpsControl | read-write | current | The control for the DHCP Server configuration. All changes to the cmGwDhcpServer mib objects are reflected when reading the value of the mib objects; however, … |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.2.16 | ScalarcmGwLanDhcpsCommitStatus | read-only | current | Indicates the status of the commiting the current cmGwDhcpServer mib object values to the running configuration of the DHCP Server. commitSucceeded - indicates… |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3 | NodecmGwDhcpAddr | |||
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1 | TablecmGwLanAddrTable | not-accessible | current | This table is a list of LAN-side realm parameters. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1 | RowcmGwLanAddrEntry | not-accessible | current | List of general parameters for DHCP mappings. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.1 | ColumncmGwLanAddrIpType | not-accessible | current | The address type assigned on the LAN side for the DHCP Address Table. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.2 | ColumncmGwLanAddrIp | not-accessible | current | The address assigned on the LAN side for the DHCP Address Table. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.3 | ColumncmGwLanAddrClientID | read-create | current | The client ID as indicated in Option 61 of the DHCP Discover. There is a one-to-one relationship between the Client ID and the assigned LAN address. This param… |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.4 | ColumncmGwLanAddrLeaseCreateTime | read-only | current | This value is only set when the cmGwLanAddrTable entry is created and the entry does not already exist. In other words, this value is not overwritten at lease … |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.5 | ColumncmGwLanAddrLeaseExpireTime | read-only | current | This is the time that the LAN side lease expires. When the lease expires this entry will be deleted from the table. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.6 | ColumncmGwLanAddrMethod | read-only | current | The method that created this Address Entry and the status of the lease. staticInactive(1) indicates that configuration through the NMS/GUI established this row… |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.7 | ColumncmGwLanAddrHostName | read-create | current | This is the Host Name of the LAN IP address, based on DCHP option 12. |
| 1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.8 | ColumncmGwLanAddrRowStatus | read-create | current | The RowStatus interlock for creation and deletion. |
| 1.3.6.1.4.1.1166.1.19.52.1.3 | NodecmGwNatMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.3.1 | NodecmGwNatObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.1 | NodecmGwNatBase | |||
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.1.1 | ScalarcmGwNatSetToFactory | read-write | current | Setting this object to true(1) causes all the NAPT tables to be cleared, and all NAPT objects with defaults to be reset back to their default values. The objec… |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.1.2 | ScalarcmGwNatTcpTimeWait | read-write | current | This object is the maximum inactivity time to wait before assuming TCP session is terminated. It has no relation to the TCP session TIME_WAIT state referred to… |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.1.3 | ScalarcmGwNatUdpTimeWait | read-write | current | The maximum time to wait before assuming UDP session is terminated. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.1.4 | ScalarcmGwNatIcmpTimeWait | read-write | current | The inactivity time to wait before destroying mappings for ICMP. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.1.5 | ScalarcmGwNatPrimaryMode | read-write | current | The Primary Packet Handling Mode to be used. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.1.6 | ScalarcmGwNatGamingDMZIpAddrType | read-write | current | The address type assigned to cmGwNatGamingDMZIpAddr. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.1.7 | ScalarcmGwNatGamingDMZIpAddr | read-write | current | The Ip address of the NAT'd Gaming DMZ host which is the default port forwarder and bypasses the firewall. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2 | NodecmGwNatMap | |||
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1 | TablecmGwNatMappingTable | not-accessible | current | This table contains IP address and port translation information for all address translation mappings. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1 | RowcmGwNatMappingEntry | not-accessible | current | List of IP address translation and port translation mappings. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.1 | ColumncmGwNatMappingIndex | not-accessible | current | The Index into the Mapping Table. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.2 | ColumncmGwNatMappingWanAddrType | read-only | current | The IP address type assigned on the WAN side. IP version 4 is typically used. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.3 | ColumncmGwNatMappingWanAddr | read-only | current | The IP address assigned on the WAN side. IP version 4 is typically used. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.4 | ColumncmGwNatMappingWanPort | read-only | current | The TCP/UDP port number on the WAN side. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.5 | ColumncmGwNatMappingLanAddrType | read-only | current | The IP address type assigned on the LAN side. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.6 | ColumncmGwNatMappingLanAddr | read-only | current | The IP address assigned on the LAN side. This parameter is entered by the DHCP server when it grants a lease to a LAN IP Device on the LAN side and creates a r… |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.7 | ColumncmGwNatMappingLanPort | read-only | current | The TCP/UDP port number on the LAN side. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.8 | ColumncmGwNatMappingMethod | read-only | current | Indicates how this mapping was created. Static means that it was provisioned, and dynamic means that it was handled by the gateway itself. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.9 | ColumncmGwNatMappingProtocol | read-only | current | The protocol for this mapping. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.10 | ColumncmGwNatMappingRowStatus | read-only | current | The RowStatus interlock for the creation and deletion of a cmGwNatMappingTable entry. Changing the value of the IP address or port number columns of the Gatewa… |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2 | TablecmGwNatPassthroughTable | not-accessible | current | This table contains MAC addresses for LAN-IP Devices which are configured as passthrough mode. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1 | RowcmGwNatPassthroughEntry | not-accessible | current | List of hardware addresses for LAN IP Devices which are configured as passthrough mode. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1.1 | ColumncmGwNatPassthroughIndex | not-accessible | current | The index into the passthrough table. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1.2 | ColumncmGwNatPassthroughMACAddr | read-create | current | MAC Address of LAN-IP Device to be configured as passthrough mode. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1.3 | ColumncmGwNatPassthroughDMZEnable | read-create | current | When this value is set to true, traffic for this device will not be firewalled. |
| 1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1.4 | ColumncmGwNatPassthroughRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cmGwNatPassthroughTable entry. There are no restrictions on setting the read-create column of this t… |
| 1.3.6.1.4.1.1166.1.19.52.1.4 | NodecmGwLogMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.4.1 | NodecmGwDevEvent | |||
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.1 | ScalarcmGwDevEvControl | read-write | current | Setting this object to resetLog(1) empties the event log. All data is deleted. Reading this object always returns resetLog(1). |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2 | TablecmGwDevEventTable | not-accessible | current | Contains a log of network and device events that may be of interest in fault isolation and troubleshooting. |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1 | RowcmGwDevEventEntry | not-accessible | current | Describes a network or device event that may be of interest in fault isolation and troubleshooting. Multiple sequential identical events are represented by inc… |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.1 | ColumncmGwDevEvIndex | not-accessible | current | Provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via cmGwDevEvControl, (b) the dev… |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.2 | ColumncmGwDevEvFirstTime | read-only | current | The time that this entry was created. |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.3 | ColumncmGwDevEvLastTime | read-only | current | If multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as cmGwDevE… |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.4 | ColumncmGwDevEvCounts | read-only | current | The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplic… |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.5 | ColumncmGwDevEvLevel | read-only | current | The priority level of this event as defined by the vendor. These are ordered from most serious (emergency) to least serious (debug). |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.6 | ColumncmGwDevEvId | read-only | current | For this product, uniquely identifies the type of event that is reported by this entry. |
| 1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.7 | ColumncmGwDevEvText | read-only | current | Provides a human-readable description of the event, including all relevant context (interface numbers, etc.). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000 | NodecmGwAlgMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1 | NodecmGwAlgObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.1 | ScalarcmGwAlgSetToFactory | read-write | current | Setting this object to true(1) causes all Port Trigger entries to be cleared to default values. Reading this object always returns false(2). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2 | TablecmGwAlgTable | not-accessible | current | Table of ALGs (Port Triggers) supported by this device. This table currently supports up to 47 configureable entries. The first 15 entries are predefined and o… |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1 | RowcmGwAlgEntry | not-accessible | current | Each entry specifies parameters about an ALG (Port Trigger) . |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.1 | ColumncmGwAlgIndex | not-accessible | current | The index for this ALG (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.2 | ColumncmGwAlgName | read-create | current | Unique name for this ALG (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.3 | ColumncmGwAlgProtocol | read-create | current | Protocol type for this ALG (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.4 | ColumncmGwAlgPortFrom | read-create | current | Start port for this ALG (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.5 | ColumncmGwAlgPortTo | read-create | current | End port for this ALG (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.6 | ColumncmGwAlgSessionChaining | read-create | current | Control session chaining for this ALG (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.7 | ColumncmGwAlgSessionInterval | read-create | current | Control session interval in seconds for this ALG (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.8 | ColumncmGwAlgAddressReplacement | read-create | current | Controls the type of address replacement to be performed for this ALG (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.9 | ColumncmGwAlgMultipleHostEnable | read-create | current | Set to true to only allow new Port Trigger session initiated from/to the same remote host. Set to false to allow new session initated from/to different remote … |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.10 | ColumncmGwAlgEnable | read-create | current | Set to true to enable this Alg (Port Trigger). Set to false to disable this Alg (Port Trigger). |
| 1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.11 | ColumncmGwAlgStatus | read-create | current | Controls the creation and modification of Port Trigger entries in this table. To change any ALG(Port Trigger) MIB objects will require cmGwAlgStatus to set to … |
| 1.3.6.1.4.1.1166.1.19.52.1.1001 | NodecmGwVirtualServerMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1 | NodecmGwVirtualServerObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.1 | ScalarcmGwVirtualServerSetToFactory | read-write | current | Setting this object to true(1) causes all Port Forwarding entries to be cleared to default values. Reading this object always returns false(2). |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2 | TablecmGwVirtualServerTable | not-accessible | current | Table of virtual server (Port Forwarding) entry supported by this device. This table currently supports 32 configureable entries. |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1 | RowcmGwVirtualServerEntry | not-accessible | current | Each entry specifies parameters about a virtual server (Port Forwarding). Note: For products that support USB applications, the first entry in this table is re… |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.1 | ColumncmGwVirtualServerIndex | not-accessible | current | The Index into the virtual server (Port Forwarding) Table. |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.2 | ColumncmGwVirtualServerName | read-create | current | The server name for this virtual server (Port Forwarding) entry. The server name can be empty string. |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.3 | ColumncmGwVirtualServerType | read-create | current | Indicates how cmGwVirtualServerPort1 and cmGwVirtualServerPort2 used. wanPortRange(1) means that cmGwVirtualServerPort1 is the starting WAN port range and cmGw… |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.4 | ColumncmGwVirtualServerPort1 | read-create | current | The TCP/UDP port number 1. |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.5 | ColumncmGwVirtualServerPort2 | read-create | current | The TCP/UDP port number 2. |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.6 | ColumncmGwVirtualServerLanAddrType | read-create | current | The IP address type assigned on the LAN side. |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.7 | ColumncmGwVirtualServerLanAddr | read-create | current | The IP address assigned on the LAN side. The first 3 octets default value should be the LAN Private IP Address (192.168.0) and 0 for the last octet. The last o… |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.8 | ColumncmGwVirtualServerEnable | read-create | current | Set to true to enable this virtual server (Port Forwarding) entry. Set to false to disable this virtual server (Port Forwarding) entry. |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.9 | ColumncmGwVirtualServerRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cmGwVirtualServerTable entry. The SNMP entity will prevent modification of this table's columns when… |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.10 | ColumncmGwVirtualServerProtocol | read-create | current | Protocol type for this virtual server (Port Forwarding) entry. |
| 1.3.6.1.4.1.1166.1.19.52.1.1001.1.3 | ScalarcmGwVirtualServerUSBAppsPort | read-write | current | The TCP/UDP port number used to create a port forwarding table entry to allow users access to the internal USB_Apps GUI pages from the internet. |
| 1.3.6.1.4.1.1166.1.19.52.1.1002 | NodecmGwAlgPredefinedMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1002.1 | NodecmGwAlgPredfinedObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1002.1.1 | TablecmGwAlgPredefinedTable | not-accessible | current | Table of predefined ALGs supported by this device. Note: This table contains predefined entries for true NAT ALGs (Application Level Gateways) for protocols th… |
| 1.3.6.1.4.1.1166.1.19.52.1.1002.1.1.1 | RowcmGwAlgPredefinedEntry | not-accessible | current | Each entry specifies parameters about a predefined ALG. |
| 1.3.6.1.4.1.1166.1.19.52.1.1002.1.1.1.1 | ColumncmGwAlgPredefinedIndex | not-accessible | current | The index for this predefined ALG. |
| 1.3.6.1.4.1.1166.1.19.52.1.1002.1.1.1.2 | ColumncmGwAlgPredefinedName | read-only | current | Unique name for this predefined ALG. |
| 1.3.6.1.4.1.1166.1.19.52.1.1002.1.1.1.3 | ColumncmGwAlgPredefinedEnable | read-write | current | Set to true to enable this predefined ALG. Set to false to disable this predefined ALG. |
| 1.3.6.1.4.1.1166.1.19.52.1.1003 | NodecmGwAdvCfgMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1003.1 | NodecmGwAdvCfgObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1003.1.1 | ScalarcmGwAdvCfgUPnPEnable | read-write | current | Setting this object to true(1) enables UPnP on the Gateway device. Setting this object to false(2) disables UPnP on the Gateway device. |
| 1.3.6.1.4.1.1166.1.19.52.1.1003.1.2 | ScalarcmGwAdvCfgIpsecPassThroughEnable | read-write | current | Setting this object to true(1) enables Internet Protocol Security (Ipsec) passthrough on the Gateway device. Setting this object to false(2) disables Internet … |
| 1.3.6.1.4.1.1166.1.19.52.1.1003.1.3 | ScalarcmGwAdvCfgPptpPassThroughEnable | read-write | current | Setting this object to true(1) enables Point-to-Point Tunneling Protocol (PPTP) passthrough on the Gateway device. Setting this object to false(2) disables Poi… |
| 1.3.6.1.4.1.1166.1.19.52.1.1003.1.4 | ScalarcmGwAdvCfgParentalControl | read-only | current | This is the status mib of the current state of the Parental Control Settings that are stored in NonVol. The format will be delimited by a ;. The first value wi… |
| 1.3.6.1.4.1.1166.1.19.52.1.1004 | NodecmGwPortTriggerMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1 | NodecmGwPortTriggerObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.1 | ScalarcmGwPortTriggerSetToFactory | read-write | current | Setting this object to true(1) causes all Port Trigger entries to be cleared. Reading this object always returns false(2). |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2 | TablecmGwPortTriggerTable | not-accessible | current | Table of Port Triggers supported by this device. |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1 | RowcmGwPortTriggerEntry | not-accessible | current | Each entry specifies parameters for a Port Trigger. |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.1 | ColumncmGwPortTriggerIndex | not-accessible | current | The index for this Port Trigger. |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.2 | ColumncmGwPortTriggerStartPortTriggerRange | read-create | current | Start port of Trigger Range for this Port Trigger. Trigger Range defines the range of ports that will act as a trigger to open the ports set by Target Range. |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.3 | ColumncmGwPortTriggerEndPortTriggerRange | read-create | current | End port of Trigger Range for this Port Trigger. Trigger Range defines the range of ports that will act as a trigger to open the ports set by Target Range. |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.4 | ColumncmGwPortTriggerStartPortTargetRange | read-create | current | Start port of Target Range for this Port Trigger. When the gateway detects outgoing data on a specific port number set in the Trigger Range(cmGwPortTriggerStar… |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.5 | ColumncmGwPortTriggerEndPortTargetRange | read-create | current | End port of Target Range for this Port Trigger. When the gateway detects outgoing data on a specific port number set in the Trigger Range(cmGwPortTriggerStartP… |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.6 | ColumncmGwPortTriggerProtocol | read-create | current | Protocol type for this Port Trigger. |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.7 | ColumncmGwPortTriggerEnable | read-create | current | Set to true to enable this Port Trigger. Set to false to disable this Port Trigger. |
| 1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.8 | ColumncmGwPortTriggerRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cmGwPortTriggerTable entry. The SNMP entity will prevent modification of this table's columns when c… |
| 1.3.6.1.4.1.1166.1.19.52.1.1005 | NodecmGwFiltersMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1 | NodecmGwFiltersObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1 | NodecmGwFiltersIpFilter | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.1 | ScalarcmGwFiltersIpFilterSetToFactory | read-write | current | Setting this object to true(1) causes all IP Filter entries in cmGwIpFilterTable to be cleared. Reading this object always returns false(2). |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2 | TablecmGwFiltersIpFilterTable | not-accessible | current | Table of IP address filters used to block internet traffic to specific network devices on the LAN. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1 | RowcmGwFiltersIpFilterEntry | not-accessible | current | Each entry specifies parameters for an IP address filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.1 | ColumncmGwFiltersIpFilterIndex | not-accessible | current | The index for this IP address filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.2 | ColumncmGwFiltersIpFilterAddressType | read-create | current | The IP address type assigned on the LAN side. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.3 | ColumncmGwFiltersIpFilterStartAddress | read-create | current | The Start IP address for this IP address filter. This address must be within the range of LAN side IP addresses. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.4 | ColumncmGwFiltersIpFilterEndAddress | read-create | current | The End IP address for this IP filter. This address must be within the range of LAN side IP addresses. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.5 | ColumncmGwFiltersIpFilterEnable | read-create | current | Set to true to enable this IP Filter. Set to false to disable this IP Filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.6 | ColumncmGwFiltersIpFilterRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cmGwFiltersIpFilterTable entry. The SNMP entity will prevent modification of this table's columns wh… |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.2 | NodecmGwFiltersMacFilter | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.1 | ScalarcmGwFiltersMacFilterSetToFactory | read-write | current | Setting this object to true(1) causes all MAC Filter entries in cmGwMacFilterTable to be cleared. Reading this object always returns false(2). |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2 | TablecmGwFiltersMacFilterTable | not-accessible | current | Table of MAC address filters used to block internet traffic to specific network devices on the LAN. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2.1 | RowcmGwFiltersMacFilterEntry | not-accessible | current | Each entry specifies MAC address of the network device to be blocked from internet access. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2.1.1 | ColumncmGwFiltersMacFilterIndex | not-accessible | current | The index for this MAC address filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2.1.2 | ColumncmGwFiltersMacFilterMacAddress | read-create | current | MAC address of the network device to be blocked from internet access. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2.1.3 | ColumncmGwFiltersMacFilterRowStatus | read-create | current | There are no restrictions on setting the read-create columns of this table when the status of cmGwMacFilterRowStatus is 'active'. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3 | NodecmGwFiltersPortFilter | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.1 | ScalarcmGwFiltersPortFilterSetToFactory | read-write | current | Setting this object to true(1) causes all Port Filter entries in cmGwPortFilterTable to be cleared. Reading this object always returns false(2). |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2 | TablecmGwFiltersPortFilterTable | not-accessible | current | Table of Port filters used to block specific internet services to all devices on the LAN. These are outbound Port Filters that prevent LAN devices from sending… |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1 | RowcmGwFiltersPortFilterEntry | not-accessible | current | Each entry specifies parameters about a Port filtering rule. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.1 | ColumncmGwFiltersPortFilterIndex | not-accessible | current | The index for this Port Filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.2 | ColumncmGwFiltersPortFilterStartPort | read-create | current | Start Port Number for this Port Filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.3 | ColumncmGwFiltersPortFilterEndPort | read-create | current | End Port Number for this Port Filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.4 | ColumncmGwFiltersPortFilterProtocol | read-create | current | Protocol type for this Port Filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.5 | ColumncmGwFiltersPortFilterEnable | read-create | current | Set to true to enable this Port Filter. Set to false to disable this Port Filter. |
| 1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.6 | ColumncmGwFiltersPortFilterRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cmGwFiltersPortFilterTable entry. The SNMP entity will prevent modification of this table's columns … |
| 1.3.6.1.4.1.1166.1.19.52.1.1006 | NodecmGwFirewallMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1006.1 | NodecmGwFirewallObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1006.1.1 | ScalarcmGwFirewallProtectEnable | read-write | current | Setting this object to true(1) enables the IPV4 Firewall features. Setting this object to false(2) disables the IPV4 Firewall features. |
| 1.3.6.1.4.1.1166.1.19.52.1.1006.1.2 | ScalarcmGwFirewallIpFloodDetectEnable | read-write | current | Setting this object to true(1) enables IP Flood detection. If enabled, the gateway detects and blocks packet floods originating from both the LAN and WAN. Sett… |
| 1.3.6.1.4.1.1166.1.19.52.1.1006.1.3 | ScalarcmGwFirewallPortScanDetectEnable | read-write | current | Setting this object to true(1) enables Port Scan detection. If enabled, the gateway detects and blocks port scan activity originating from both the LAN and WAN… |
| 1.3.6.1.4.1.1166.1.19.52.1.1006.1.4 | ScalarcmGwFirewallBlockFragIpEnable | read-write | current | Setting this object to true(1) prevents all fragmented IP packets from passing through the firewall. Setting this object to false(2) allows fragmented IP Packe… |
| 1.3.6.1.4.1.1166.1.19.52.1.1006.1.5 | ScalarcmGwFirewallProtectionLevel | read-write | current | This object can be used to select the firewall protection level if cmGwFirewallProtectEnable is set to true. Set on this object would fail if cmGwFirewallProte… |
| 1.3.6.1.4.1.1166.1.19.52.1.1006.1.6 | ScalarcmGwIPv6FirewallProtectEnable | read-write | current | Setting this object to true(1) enables the IPv6 Firewall. Setting this object to false(2) disables the IPv6 Firewall. |
| 1.3.6.1.4.1.1166.1.19.52.1.1007 | NodecmGwProvisioningMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1007.1 | NodecmGwProvisioningObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1007.1.1 | ScalarcmGwProvDeviceProvisioningMode | read-write | current | This object is used to specify the method by which the Gateway is provisioned. The default method is via TLV settings in the CM configuration file. MSOs may us… |
| 1.3.6.1.4.1.1166.1.19.52.1.1007.1.2 | ScalarcmGwProvDeviceConfigStatus | read-write | current | For products that download a separate Gateway config file this object is used to retrieve the configuration status of the Gateway. If set to notSpecified(1), t… |
| 1.3.6.1.4.1.1166.1.19.52.1.1007.1.3 | ScalarcmGwProvDeviceConfigFilename | read-write | current | This object is used to specify the location of the Gateway configuration file. |
| 1.3.6.1.4.1.1166.1.19.52.1.1007.1.4 | ScalarcmGwProvErouterMode | read-write | current | Toggles IP Provisioning Modes for eRouter. disabled(1) disables the eRouter and places the device in bridge mode. ipv4(2) places the eRouter in IPv4Only mode. … |
| 1.3.6.1.4.1.1166.1.19.52.1.1007.1.5 | ScalarcmGwProvErouterIPv6PassthruMode | read-write | current | The value of this object controls the eRouter IPv6 passthrough feature on product deployments that support it. When the value of this object is set to disabled… |
| 1.3.6.1.4.1.1166.1.19.52.1.1008 | NodecmGwDsliteMib | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1008.1 | NodecmGwDsliteObjects | |||
| 1.3.6.1.4.1.1166.1.19.52.1.1008.1.1 | ScalarcmGwDsliteEnabled | read-write | current | Enables or disable DS-lite support in the device. |
| 1.3.6.1.4.1.1166.1.19.52.1.1008.1.2 | ScalarcmGwDsliteAftrAddress | read-write | current | IPv6 address of the AFTR endpoint of the DS-lite tunnel. |
| 1.3.6.1.4.1.1166.1.19.52.1.1008.1.3 | ScalarcmGwDslitePcpMode | read-write | current | PCP (Port Control Protocol) operational mode |
| 1.3.6.1.4.1.1166.1.19.52.1.1008.1.4 | ScalarcmGwDsliteTcpMssClamping | read-write | current | Specifies whether TCP MSS clamping is enabled on the interface. 0 disables clamping, 1 clamps the MSS depending on the interface MTU. A value > 1 will be used … |
| 1.3.6.1.4.1.1166.1.19.52.1.1008.1.5 | ScalarcmGwDsliteIPv4FragEnabled | read-write | current | Enables or disable IPv4 fragmentation in DS-Lite |
| 1.3.6.1.4.1.1166.1.19.52.2 | NodecmGwConformance | |||
| 1.3.6.1.4.1.1166.1.19.52.2.1 | NodecmGwCompliances | |||
| 1.3.6.1.4.1.1166.1.19.52.2.1.1 | CompliancecmGwCompliance | read-only | current | The compliance statement for devices that implement Gateway MIB |
| 1.3.6.1.4.1.1166.1.19.52.2.2 | NodecmGwGroups | |||
| 1.3.6.1.4.1.1166.1.19.52.2.2.1 | GroupcmGwBaseGroup | current | A collection of objects for configuring gateway. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CmGwLanClientId | OCTET STRING (SIZE (1..80)) | current | DHCP option61 information. |
| CmGwNatPacketMode | INTEGER { napt (1), passthrough (3) } | current | The mapping type established when a binding/mapping is established. |