MIB Viewer
 MIB Viewer Desktop New

DATACOM-CESOP-MIB

63 objects
The MIB module for CESoP.
Imported Objects
DATACOM-SMIdatacomAccessDevicesMIBs
IF-MIBInterfaceIndex
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 enterprises MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCDisplayString PhysAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.3709.3.5.300IdentitydmCesopMIBThe MIB module for CESoP.
1.3.6.1.4.1.3709.3.5.300.1NodedmCesopBundle
1.3.6.1.4.1.3709.3.5.300.1.1TablebundleCountersTablenot-accessiblecurrentTable containing a collection of counters from bundle interfaces.
1.3.6.1.4.1.3709.3.5.300.1.1.1RowbundleCountersEntrynot-accessiblecurrentAn entry containing a collection of counters from bundle interfaces.
1.3.6.1.4.1.3709.3.5.300.1.1.1.1ColumnbundleCountersIndexread-onlycurrentA unique value, greater than zero, for each bundle interface.
1.3.6.1.4.1.3709.3.5.300.1.1.1.2ColumnbundleCountersNameread-onlycurrentA textual string containing the name of bundle interface.
1.3.6.1.4.1.3709.3.5.300.1.1.1.3ColumnbundleCountersBufferOverflowread-onlycurrentThe number of overflows that occurred on bundle's jitter buffer.
1.3.6.1.4.1.3709.3.5.300.1.1.1.4ColumnbundleCountersBufferUnderflowread-onlycurrentThe number of underflows that occurred on bundle's jitter-buffer.
1.3.6.1.4.1.3709.3.5.300.1.1.1.5ColumnbundleCountersLostPacketsread-onlycurrentThe number of packets removed from jitter buffer to be transmitted via TDM interface, with sequence number higher than expected while respecting the jitter buf…
1.3.6.1.4.1.3709.3.5.300.1.1.1.6ColumnbundleCountersLostPacketsRateread-onlycurrentThe rate of lost packets in packets per second.
1.3.6.1.4.1.3709.3.5.300.1.1.1.7ColumnbundleCountersOutOfOrderPacketsread-onlycurrentThe number of packets with sequence number different from the expected, but in the range where it can be reordered in jitter buffer.
1.3.6.1.4.1.3709.3.5.300.1.1.1.8ColumnbundleCountersSequenceNumberViolationread-onlycurrentThe number of packets with sequence number exceeding the jitter-buffer capacity.
1.3.6.1.4.1.3709.3.5.300.1.1.1.9ColumnbundleCountersWrongSizePacketsread-onlycurrentThe number of packets received on bundle interface with different size of configured value.
1.3.6.1.4.1.3709.3.5.300.1.1.1.10ColumnbundleCountersJitterBufferOccupationread-onlycurrentThe jitter buffer size, in microseconds.
1.3.6.1.4.1.3709.3.5.300.1.2TablebundleStatusTablenot-accessiblecurrentTable containing status information about the bundle interfaces.
1.3.6.1.4.1.3709.3.5.300.1.2.1RowbundleStatusEntrynot-accessiblecurrentAn entry containing status information about the bundle interfaces.
1.3.6.1.4.1.3709.3.5.300.1.2.1.1ColumnbundleStatusIndexread-onlycurrentA unique value, greater than zero, for each bundle interface.
1.3.6.1.4.1.3709.3.5.300.1.2.1.2ColumnbundleStatusNameread-onlycurrentA textual string containing the name of bundle interface.
1.3.6.1.4.1.3709.3.5.300.1.2.1.3ColumnbundleStatusLocalBundleread-onlycurrentLocal bundle interface status. Values can be: OK(1): local bundle interface is ok, without failures; Fail(2): packet loss on local bundle interface is over the…
1.3.6.1.4.1.3709.3.5.300.1.2.1.4ColumnbundleStatusRemoteBundleread-onlycurrentRemote bundle interface status. Values can be: OK(1): remote bundle interfaces is ok, without failures; Fail(2): packet loss on remote bundle interfaces is ove…
1.3.6.1.4.1.3709.3.5.300.1.2.1.5ColumnbundleStatusLocalTdmread-onlycurrentLocal TDM interface status. Values can be: OK(1): local TDM interface is ok, without failures; Fail(2): an error occurs on local TDM interface; RDI(3): an erro…
1.3.6.1.4.1.3709.3.5.300.1.2.1.6ColumnbundleStatusRemoteTdmread-onlycurrentRemote TDM interface status. Values can be: OK(1): local TDM interface is ok, without failures; Fail(2): an error occurs on local TDM interface; RDI(3): an err…
1.3.6.1.4.1.3709.3.5.300.1.2.1.7ColumnbundleStatusPacketSizeread-onlycurrentIndicates if local bundle interface is receiving packets with right sizes. Values can be: OK(1): received packets are with correct size; Mismatch(4): received …
1.3.6.1.4.1.3709.3.5.300.1.2.1.8ColumnbundleStatusNextHopread-onlycurrentBundle next-hop interface status. Values can be: OK(1): next-hop interface is ok; Down(5): is impossible to access next-hop IP address configured on bundle int…
1.3.6.1.4.1.3709.3.5.300.1.2.1.9ColumnbundleStatusMacread-onlycurrentBundle next-hop physical(MAC) address.
1.3.6.1.4.1.3709.3.5.300.2NodedmCesopPw
1.3.6.1.4.1.3709.3.5.300.2.1TablepwCountersTablenot-accessiblecurrentTable containing a collection of counters from PW interfaces.
1.3.6.1.4.1.3709.3.5.300.2.1.1RowpwCountersEntrynot-accessiblecurrentAn entry containing a collection of counters from PW interfaces.
1.3.6.1.4.1.3709.3.5.300.2.1.1.1ColumnpwCountersIndexread-onlycurrentA unique value, greater than zero, for each PW interface.
1.3.6.1.4.1.3709.3.5.300.2.1.1.2ColumnpwCountersPacketsInputread-onlycurrentThe total number of packets received by the equipment via PW interface.
1.3.6.1.4.1.3709.3.5.300.2.1.1.3ColumnpwCountersTotalDiscardInputread-onlycurrentThe total number of inbound packets discarded by the equipment.
1.3.6.1.4.1.3709.3.5.300.2.1.1.4ColumnpwCountersBundlesReachedPacketsread-onlycurrentThe total number of packets sent to the local bundle interface.
1.3.6.1.4.1.3709.3.5.300.2.1.1.5ColumnpwCountersOctetsInputread-onlycurrentThe total number of octets received on PW interface.
1.3.6.1.4.1.3709.3.5.300.2.1.1.6ColumnpwCountersOctetsOutputread-onlycurrentThe total number of octets transmitted out of PW interface.
1.3.6.1.4.1.3709.3.5.300.2.1.1.7ColumnpwCountersUnicastInputread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.
1.3.6.1.4.1.3709.3.5.300.2.1.1.8ColumnpwCountersUnicastOutputread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-…
1.3.6.1.4.1.3709.3.5.300.2.1.1.9ColumnpwCountersDiscardInputread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.3709.3.5.300.2.1.1.10ColumnpwCountersDiscardOutputread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.3709.3.5.300.2.1.1.11ColumnpwCountersErrorInputread-onlycurrentThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.3709.3.5.300.2.1.1.12ColumnpwCountersErrorOutputread-onlycurrentThe number of outbound packets that could not be transmitted via PW interface because of errors.
1.3.6.1.4.1.3709.3.5.300.2.1.1.13ColumnpwCountersUnknownProtosInputread-onlycurrentThe number of packets received via the PW interface which were discarded because of unknown or unsupported protocol.
1.3.6.1.4.1.3709.3.5.300.2.1.1.14ColumnpwCountersQLenread-onlycurrentThe length of the output packet queue (in packets) of PW interface.
1.3.6.1.4.1.3709.3.5.300.3NodedmCesopSyncSource
1.3.6.1.4.1.3709.3.5.300.3.1ScalarsyncSourceTransmitClockSourceread-onlycurrentClock source. The sources can be: Internal(1): the equipment is the clock source; TDM(2): the clock received at the specified TDM interface is used as clock so…
1.3.6.1.4.1.3709.3.5.300.3.2ScalarsyncSourceStatusOutOfLimitsread-onlycurrentTransmit clock source out of limits status. Values can be: No(1): transmit clock source isn't out of limits; Yes(2): transmit clock source is out of limits.
1.3.6.1.4.1.3709.3.5.300.3.3ScalarsyncSourceStatusDetailread-onlycurrentTransmit clock source status detailed. Values can be: DontCare(1): transmit clock source is don't care; FreeRun(2): transmit clock source is free run; HoldOver…
1.3.6.1.4.1.3709.3.5.300.3.4ScalarsyncSourceActiveHierarchyread-onlycurrentNumber of the active hierarchy.
1.3.6.1.4.1.3709.3.5.300.4NodedmCesopTdm
1.3.6.1.4.1.3709.3.5.300.4.1TabletdmStatusTablenot-accessiblecurrentTable containing status information about the TDM interfaces.
1.3.6.1.4.1.3709.3.5.300.4.1.1RowtdmStatusEntrynot-accessiblecurrentAn entry containing status information about the TDM interfaces.
1.3.6.1.4.1.3709.3.5.300.4.1.1.1ColumntdmStatusIndexread-onlycurrentA unique value, greater than zero, for each TDM interface.
1.3.6.1.4.1.3709.3.5.300.4.1.1.2ColumntdmStatusLinkStatusread-onlycurrentStatus of the TDM link. Values can be: OK(1): TDM link doesn't have any failures; LOS(2): TDM link has LOS(Loss Of Signal) failure; AIS(3): TDM link has AIS(Al…
1.3.6.1.4.1.3709.3.5.300.4.1.1.3ColumntdmStatusRemoteAlarmread-onlycurrentStatus of the Remote Alarm. Values can be: OK(1): TDM link doesn't have remote alarm; RALM(6): TDM link has remote alarm; NotAvailable(8): not used in running …
1.3.6.1.4.1.3709.3.5.300.4.1.1.4ColumntdmStatusCasStatusread-onlycurrentStatus of CAS alignment. Values can be: OK(1): CAS alignment doesn't have any failure; LOM(5): CAS alignment has LOM(Loss Of Multiframe) failure; NotAvailable(…
1.3.6.1.4.1.3709.3.5.300.4.1.1.5ColumntdmStatusCrcStatusread-onlycurrentStatus of CRC alignment. Values can be: OK(1): CRC alignment doesn't have any failure; Fail(7): CRC alignment has failed; NotAvailable(8): not used in running …
1.3.6.1.4.1.3709.3.5.300.5NodedmCesopSyncSourceHierarchy
1.3.6.1.4.1.3709.3.5.300.5.1TablesyncSourceHierarchyTablenot-accessiblecurrentTable containing configuration information about the sync source hierarchies.
1.3.6.1.4.1.3709.3.5.300.5.1.1RowsyncSourceHierarchyEntrynot-accessiblecurrentTable containing configuration information about the sync source hierarchies.
1.3.6.1.4.1.3709.3.5.300.5.1.1.1ColumnsyncSourceHierarchyIndexread-onlycurrentA unique value, greater than zero, for each sync source hierarchy.
1.3.6.1.4.1.3709.3.5.300.5.1.1.2ColumnsyncSourceHierarchyEnableread-onlycurrentIndicates if the hierarchy is enabled and in use. Values can be: No(1): The hierarchy is enabled and in use; Yes(2): The hierarchy is disabled and not in use.
1.3.6.1.4.1.3709.3.5.300.5.1.1.3ColumnsyncSourceHierarchyTransmitClockSourceread-onlycurrentClock source. The sources can be: Internal(1): the equipment is the clock source; TDM(2): the clock received at the specified TDM interface is used as clock so…
1.3.6.1.4.1.3709.3.5.300.5.1.1.4ColumnsyncSourceHierarchyOutOfLimitsread-onlycurrentSync source hierarchy out of limits status. Values can be: No(1): sync source hierarchy isn't out of limits; Yes(2): sync source hierarchy is out of limits.
1.3.6.1.4.1.3709.3.5.300.5.1.1.5ColumnsyncSourceHierarchyStatusDetailread-onlycurrentSync source hierarchy state. Values can be: Available(2): sync source hierarchy is available; Fail(3): sync source hierarchy is fail.