EDGECORE-IPv6
21 objects
The private MIB module definition for IPv6 MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.259.10.1.14.89.26.19 | TablerlIpAddressTable | not-accessible | current | This table is parallel to ipAddressTable, and is used to add/delete IPv6 entries to/from that table. It contains private objects. |
| 1.3.6.1.4.1.259.10.1.14.89.26.19.1 | RowrlIpAddressEntry | not-accessible | current | An address mapping for a particular interface. |
| 1.3.6.1.4.1.259.10.1.14.89.26.19.1.1 | ColumnrlIpAddressPrefixLength | read-create | current | The prefix length of this address. |
| 1.3.6.1.4.1.259.10.1.14.89.26.19.1.2 | ColumnrlIpAddressType | read-only | current | Extend standard field ipAddressType to multicast |
| 1.3.6.1.4.1.259.10.1.14.89.26.20 | Tablerlipv6InterfaceTable | not-accessible | current | This table is parallel to ipv6InterfaceTable, and is used to configure additional interface parameters. |
| 1.3.6.1.4.1.259.10.1.14.89.26.20.1 | Rowrlipv6InterfaceEntry | not-accessible | current | Additional configuration parameters for a particular interface. |
| 1.3.6.1.4.1.259.10.1.14.89.26.20.1.1 | Columnrlipv6InterfaceNdDadAttemps | read-create | current | ND Duplicated address detection number of attempts. |
| 1.3.6.1.4.1.259.10.1.14.89.26.20.1.2 | Columnrlipv6InterfaceAutoconfigEnable | read-create | current | Enables or disables Stateless Address Auto configuration on specific interface. |
| 1.3.6.1.4.1.259.10.1.14.89.26.20.1.3 | Columnrlipv6InterfaceIcmpUnreachSendEnable | read-create | current | Enables or disables sending of ICMP Destination Unreachable Error on specific interface. |
| 1.3.6.1.4.1.259.10.1.14.89.26.20.1.4 | Columnrlipv6InterfaceLinkMTU | read-create | current | The maximum transmission unit (MTU) size of IPv6 packets sent on an interface in bytes. |
| 1.3.6.1.4.1.259.10.1.14.89.26.20.1.5 | Columnrlipv6InterfaceMLDVersion | read-create | current | Set version of MLD protocol on specific interface. |
| 1.3.6.1.4.1.259.10.1.14.89.26.21 | TablerlinetCidrRouteTable | not-accessible | current | This table is parallel to inetCidrRouteTable, and is used to configure or display additional route parameters. |
| 1.3.6.1.4.1.259.10.1.14.89.26.21.1 | RowrlinetCidrRouteEntry | not-accessible | current | Additional parameters for a particular route. |
| 1.3.6.1.4.1.259.10.1.14.89.26.21.1.1 | ColumnrlinetCidrRouteLifetime | read-only | current | The remaining length of time, in seconds, that this route will continue to be valid, i.e., time until deprecation. A value of 4,294,967,295 represents infinity. |
| 1.3.6.1.4.1.259.10.1.14.89.26.22 | TablerlipNetToPhysicalTable | not-accessible | current | This table is parallel to ipNetToPhysicalTable, and is used to configure or display additional neighbor parameters. |
| 1.3.6.1.4.1.259.10.1.14.89.26.22.1 | RowrlipNetToPhysicalEntry | not-accessible | current | Additional parameters for a neighbor |
| 1.3.6.1.4.1.259.10.1.14.89.26.22.1.1 | ColumnrlipNetToPhysicalIsRouter | read-only | current | This object has the value 'true(1)', if the neighbor is router; otherwise, the value is 'false(2)'. |
| 1.3.6.1.4.1.259.10.1.14.89.129 | IdentityrlIPv6 | The private MIB module definition for IPv6 MIB. | ||
| 1.3.6.1.4.1.259.10.1.14.89.129.1 | Scalarrlipv6IcmpErrorRatelimitInterval | read-write | current | The time interval between tokens being placed in the bucket, each token represents a single ICMP error message. The interval measured in milliseconds. |
| 1.3.6.1.4.1.259.10.1.14.89.129.2 | Scalarrlipv6IcmpErrorRatelimitBucketSize | read-write | current | The maximum number of tokens stored in the bucket, each token represents a single ICMP error message. |
| 1.3.6.1.4.1.259.10.1.14.89.129.3 | Scalarrlipv6LLDefaultZone | read-write | current | The interface which would be used as the egress interface for packets sent without a specified IPv6Z interface identifier or with the default '0' identifier. Z… |