ELTEX-MES-ISS-ACL-MIB
60 objects
Access Control Lists MIB definitions.
Imported Objects
| ARICENT-ISS-ACL-MIB | issAclRateCtrlEntry |
| ARICENT-ISS-MIB | issL2FilterEntry issL3FilterEntry |
| ELTEX-MES-ISS-MIB | eltMesIss |
| IF-MIB | ifIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.35265.1.139.1 | IdentityeltMesIssAclMIB | Access Control Lists MIB definitions. | ||
| 1.3.6.1.4.1.35265.1.139.1.1 | NodeeltMesIssAclL2Filter | |||
| 1.3.6.1.4.1.35265.1.139.1.1.1 | TableeltMesIssAclL2FilterTable | not-accessible | current | This table augments the issL2FilterTable table. |
| 1.3.6.1.4.1.35265.1.139.1.1.1.1 | RoweltMesIssAclL2FilterEntry | not-accessible | current | Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number. An entry in this table will be created when the L2 Filter entry (issL… |
| 1.3.6.1.4.1.35265.1.139.1.1.1.1.1 | ColumneltMesIssAclL2FilterDstMacAddrMask | read-write | current | Specifies the mask for the packet's destination MAC address. Only masked bits will be used to filter a packet by the destination MAC address. By default, all b… |
| 1.3.6.1.4.1.35265.1.139.1.1.1.1.2 | ColumneltMesIssAclL2FilterSrcMacAddrMask | read-write | current | Specifies the mask for the packet's source MAC address. Only masked bits will be used to filter a packet by the source MAC address. By default, all bits are ma… |
| 1.3.6.1.4.1.35265.1.139.1.1.1.1.3 | ColumneltMesIssAclL2FilterUserDefinedBytesValue | read-write | current | Specifies the values of bytes in a filtered packet which are located by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable. Each two bytes in this field… |
| 1.3.6.1.4.1.35265.1.139.1.1.1.1.4 | ColumneltMesIssAclL2FilterUserDefinedBytesMask | read-write | current | Specifies the mask for bytes in a filtered packet which are located by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable. Each two bytes in this field … |
| 1.3.6.1.4.1.35265.1.139.1.1.1.1.5 | ColumneltMesIssAclL2FilterDesc | read-write | current | A user defined textual string which contains ACL description. |
| 1.3.6.1.4.1.35265.1.139.1.2 | NodeeltMesIssAclL3Filter | |||
| 1.3.6.1.4.1.35265.1.139.1.2.1 | TableeltMesIssAclL3FilterTable | not-accessible | current | This table augments the issL3FilterTable table. |
| 1.3.6.1.4.1.35265.1.139.1.2.1.1 | RoweltMesIssAclL3FilterEntry | not-accessible | current | Each entry in this table is a L3 filter rule. Index to the table is the L3 filter number. An entry in this table will be created when the L3 Filter entry (issL… |
| 1.3.6.1.4.1.35265.1.139.1.2.1.1.1 | ColumneltMesIssAclL3FilterUserDefinedBytesValue | read-write | current | Specifies the values of bytes in a filtered packet which are located by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable. Each two bytes in this field… |
| 1.3.6.1.4.1.35265.1.139.1.2.1.1.2 | ColumneltMesIssAclL3FilterUserDefinedBytesMask | read-write | current | Specifies the mask for bytes in a filtered packet which are located by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable. Each two bytes in this field … |
| 1.3.6.1.4.1.35265.1.139.1.2.1.1.3 | ColumneltMesIssAclL3FilterTrafficClass | read-write | current | The IP Traffic Class value to be checked against the packet. This value covers both DSCP and ECN fields. A value of '-1' means the Traffic Class field becomes … |
| 1.3.6.1.4.1.35265.1.139.1.2.1.1.4 | ColumneltMesIssAclL3FilterDesc | read-write | current | A user defined textual string which contains ACL description. |
| 1.3.6.1.4.1.35265.1.139.1.3 | NodeeltMesIssAclUserDefinedFilter | |||
| 1.3.6.1.4.1.35265.1.139.1.3.1 | TableeltMesIssAclUdbOffsetConfigTable | not-accessible | current | This table allows to configure user-defined bytes for ACL. |
| 1.3.6.1.4.1.35265.1.139.1.3.1.1 | RoweltMesIssAclUdbOffsetConfigEntry | not-accessible | current | An entry in eltMesIssAclUdbOffsetConfigTable. |
| 1.3.6.1.4.1.35265.1.139.1.3.1.1.1 | ColumneltMesIssAclUdbOffsetIndex | not-accessible | current | The numerical index of offset value. |
| 1.3.6.1.4.1.35265.1.139.1.3.1.1.2 | ColumneltMesIssAclUdbOffsetType | read-write | current | The starting position in a packet the offset will be counted from. |
| 1.3.6.1.4.1.35265.1.139.1.3.1.1.3 | ColumneltMesIssAclUdbOffsetByte | read-write | current | The offset value in bytes. |
| 1.3.6.1.4.1.35265.1.139.1.4 | NodeeltMesIssAclRateControl | |||
| 1.3.6.1.4.1.35265.1.139.1.4.1 | TableeltMesIssAclRateCtrlTable | not-accessible | current | This table augments the issAclRateCtrlTable table. |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1 | RoweltMesIssAclRateCtrlEntry | not-accessible | current | An entry appears in this table for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.1 | ColumneltMesIssAclRateCtrlDlfLimitKbpsValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf kilobits that can be transmitted per second over this interface. Setting this object to th… |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.2 | ColumneltMesIssAclRateCtrlBcastLimitKbpsValue | read-write | current | Allows to configure the limiting value for the maximum number of broadcast kilobits that can be transmitted per second over this interface. Setting this object… |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.3 | ColumneltMesIssAclRateCtrlMcastLimitKbpsValue | read-write | current | Allows to configure the limiting value for the maximum number of multicast kilobits that can be transmitted per second over this interface. Setting this object… |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.4 | ColumneltMesIssAclRateCtrlDlfLimitPpsValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf packets that can be transmitted per second over this interface. Setting this object to the… |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.5 | ColumneltMesIssAclRateCtrlBcastLimitPpsValue | read-write | current | Allows to configure the limiting value for the maximum number of broadcast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.6 | ColumneltMesIssAclRateCtrlMcastLimitPpsValue | read-write | current | Allows to configure the limiting value for the maximum number of multicast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.7 | ColumneltMesIssAclRateCtrlIgrBandwidth | read-write | current | Configures the interface ingress bandwidth measured in Kbit per second. All ingress traffic that exceeds the configured rate will be dropped. Rate limiting wil… |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.8 | ColumneltMesIssAclRateCtrlDlfLimitAction | read-write | current | Specifies the action to be taken if configured limiting value (in pps or kbps) is exceeded for dlf packets. |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.9 | ColumneltMesIssAclRateCtrlBcastLimitAction | read-write | current | Specifies the action to be taken if configured limiting value (in pps or kbps) is exceeded for broadcast packets. |
| 1.3.6.1.4.1.35265.1.139.1.4.1.1.10 | ColumneltMesIssAclRateCtrlMcastLimitAction | read-write | current | Specifies the action to be taken if configured limiting value (in pps or kbps) is exceeded for multicast packets. |
| 1.3.6.1.4.1.35265.1.139.1.4.2 | ScalareltMesIssAclRateCtrlConfiguredUnits | read-write | current | |
| 1.3.6.1.4.1.35265.1.139.1.4.3 | TableeltMesIssStormCtrlTable | not-accessible | current | A table of the rate limiting parameters and the storm type for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.35265.1.139.1.4.3.1 | RoweltMesIssStormCtrlEntry | not-accessible | current | An entry in eltMesIssStormCtrlTable. |
| 1.3.6.1.4.1.35265.1.139.1.4.3.1.1 | ColumneltMesIssAclStormCtrlType | not-accessible | current | The storm type. |
| 1.3.6.1.4.1.35265.1.139.1.4.3.1.2 | ColumneltMesIssAclStormDetected | read-only | current | Detected/Cleared storm on the interface. |
| 1.3.6.1.4.1.35265.1.139.1.4.3.1.3 | ColumneltMesIssAclStormPortAction | read-write | current | Specifies the action to be taken if configured limiting value (in pps or kbps) is exceeded for packets. This field is functionally the same as eltMesIssAclRate… |
| 1.3.6.1.4.1.35265.1.139.1.4.3.1.4 | ColumneltMesIssAclStormPortLimitKbpsValue | read-write | current | The limiting value for the maximum number of kilobits that can be transmitted per second over this interface. The zero value of this object means disable rate … |
| 1.3.6.1.4.1.35265.1.139.1.4.3.1.5 | ColumneltMesIssAclStormPortLimitPpsValue | read-write | current | The limiting value for the maximum number of packets that can be transmitted per second over this interface. The zero value of this object means disable rate l… |
| 1.3.6.1.4.1.35265.1.139.1.5 | NodeeltMesIssAclGenFilter | |||
| 1.3.6.1.4.1.35265.1.139.1.5.1 | TableeltMesIssAclIfTable | not-accessible | current | This table contains bindings of ACL filters to interfaces. |
| 1.3.6.1.4.1.35265.1.139.1.5.1.1 | RoweltMesIssAclIfEntry | not-accessible | current | Each entry in this table describes the binding of ACL filter to a specific interface. |
| 1.3.6.1.4.1.35265.1.139.1.5.1.1.1 | ColumneltMesIssAclIfType | not-accessible | current | Interface type. |
| 1.3.6.1.4.1.35265.1.139.1.5.1.1.2 | ColumneltMesIssAclIfIndex | not-accessible | current | Interface index. |
| 1.3.6.1.4.1.35265.1.139.1.5.1.1.3 | ColumneltMesIssAclFilterDirection | not-accessible | current | Filter direction. |
| 1.3.6.1.4.1.35265.1.139.1.5.1.1.4 | ColumneltMesIssAclFilterType | not-accessible | current | Filter type. |
| 1.3.6.1.4.1.35265.1.139.1.5.1.1.5 | ColumneltMesIssAclFilterIndex | not-accessible | current | Filter index. |
| 1.3.6.1.4.1.35265.1.139.1.5.1.1.6 | ColumneltMesIssAclIfRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.35265.1.139.1.6 | NodeeltMesIssAclNotifications | |||
| 1.3.6.1.4.1.35265.1.139.1.6.0 | NodeeltMesIssAclNotificationsPrefix | |||
| 1.3.6.1.4.1.35265.1.139.1.6.0.1 | NotificationeltMesIssAclStormControlTrap | current | An eltMesIssAclStormControlTrap is generated when the storm is occurred on the interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EltMesIssAclFilterDirection | INTEGER { input (1) } | current | ACL direction. |
| EltMesIssAclFilterType | INTEGER { aclL2Filter (1), aclL3Filter (2) } | current | ACL Filter type. |
| EltMesIssAclInterfaceType | INTEGER { vlan (1) } | current | Interface type. |
| EltMesIssAclRateCtrlActionType | INTEGER { none(1), trap(2), shutdown(3), trapAndShutdown(4) } | current | Action type. |
| EltMesIssAclStormCauseType | INTEGER { unicast(1), broadcast(2), multicast(3) } | current | Storm cause type. |