HUAWEI-ANCP-AN-EXT-MIB
71 objects
The extend MIB module is used for defining Huawei's Access Node Control Protocol (ANCP) MIB objects. ANCP is a dedicated control protocol between NAS and access nodes can facilitate NAS-managed tight QOS control in the access network, simplified OSS infrastructure for service management, optimized multicast replication to enable video services over DSL, subscriber statistics retrieval on the NAS for accounting purposes, and fault isolation capability on the NAS for the underlying access technology. Controllable multicast allows an access device to determine if a user has the authority to watch programs by identifying the user request packets. In this way, the access device controls and forwards the multicast services.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.110 | IdentityhwAncpAnExtMIB | of | The extend MIB module is used for defining Huawei's Access Node Control Protocol (ANCP) MIB objects. ANCP is a dedicated control protocol between NAS and acces… | |
| 1.3.6.1.4.1.2011.5.110.1 | NodehwAncpAnObjects | |||
| 1.3.6.1.4.1.2011.5.110.1.1 | ScalarhwAncpAnTopoDiscoveryMode | read-write | current | The object indicates the mode of reporting ANCP topology discovery. Enumerated value. Options: 1. port(1) -indicates the mode of reporting ANCP topology discov… |
| 1.3.6.1.4.1.2011.5.110.1.2 | ScalarhwAncpAnDraftVersion | read-write | current | ANCP draft version. Options: 1. draft00(0) -indicates that draft draft-wadhwa-gsmp-l2control-configuration-00 is supported 2. draft01(1) -indicates that draft … |
| 1.3.6.1.4.1.2011.5.110.1.3 | ScalarhwAncpAnPortBegin | read-write | current | This object is used to configure the start port ID in the circuit ID information of the ANCP message. Range: 0-1 Default: 0 |
| 1.3.6.1.4.1.2011.5.110.1.4 | TablehwAncpAnSessionConfigTable | not-accessible | current | This table represents the ANCP sessions in the access node. An entry in this table needs to be configured (created) before an ANCP session might be started. Th… |
| 1.3.6.1.4.1.2011.5.110.1.4.1 | RowhwAncpAnSessionConfigEntry | not-accessible | current | This table represents the ANCP sessions in the access node. An entry in this table needs to be configured (created) before an ANCP session might be started. Th… |
| 1.3.6.1.4.1.2011.5.110.1.4.1.1 | ColumnhwAncpAnSessionConfigOamThreshold | read-create | current | The OAM threshold in this session. Range: 1-100 Default: 100 |
| 1.3.6.1.4.1.2011.5.110.1.4.1.2 | ColumnhwAncpAnSessionConfigRollDefaultFlag | read-create | current | The flag indicates whether rollback is permitted when link configuration fails. Options: 1. true(1) -rollback is permitted when link configuration fails 2. fal… |
| 1.3.6.1.4.1.2011.5.110.1.4.1.3 | ColumnhwAncpAnSessionConfigBandwidthCacSwitch | read-create | current | The switch of ANCP bandwidthCAC in this session. Options: 1. true(1) 2. false(2) Default: false(2) |
| 1.3.6.1.4.1.2011.5.110.1.4.1.4 | ColumnhwAncpAnSessionConfigForceNoPartition | read-create | current | The switch of ANCP force no partition in this session. Options: 1. true(1) -indicates that the partition is zero in ANCP packet 2. false(2) -indicates that the… |
| 1.3.6.1.4.1.2011.5.110.1.5 | TablehwAncpAnCurrentSessionTable | not-accessible | current | It is the Huawei proprietary ANCP session status table. It is queried to obtain the cause of failure to establish a session and check whether the cause is inco… |
| 1.3.6.1.4.1.2011.5.110.1.5.1 | RowhwAncpAnCurrentSessionEntry | not-accessible | current | It is the Huawei proprietary ANCP session status table. It is queried to obtain the cause of failure to establish a session and check whether the cause is inco… |
| 1.3.6.1.4.1.2011.5.110.1.5.1.1 | ColumnhwAncpAnCurrentSessionDiagnostic | read-only | current | This object indicates the diagnose result when a session fails to be established. Options: 1. noDiagnostic(1) -indicates no diagnostic information 2. capabilit… |
| 1.3.6.1.4.1.2011.5.110.1.5.1.2 | ColumnhwAncpAnCurrentSessionPartitionUsedStatus | read-only | current | This object indicates the partition used status. Options: 1. used(1) -the partition is used 2. unused(2) -the partition is unused 3. unknow(255) -the session i… |
| 1.3.6.1.4.1.2011.5.110.1.6 | TablehwAncpAnInterfaceConfigTable | not-accessible | current | An entry in the table showing the partition id for a specific user facing interface. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.5.110.1.6.1 | RowhwAncpAnInterfaceConfigEntry | not-accessible | current | An entry in the table showing the partition id for a specific user facing interface. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.5.110.1.6.1.1 | ColumnhwAncpAnInterfaceEnable | read-write | current | This object specifies whether the user facing interface is managed by ANCP. Options: 1. true(1) -indicates the user facing interface is managed by ANCP 2. fals… |
| 1.3.6.1.4.1.2011.5.110.1.6.1.2 | ColumnhwAncpAnInterfaceEncapType | read-write | current | This object indicates the access type of the user. Options: 1. atm(1) -indicates the access type of user is ATM 2. eth(2) -indicates the access type of user is… |
| 1.3.6.1.4.1.2011.5.110.1.6.1.3 | ColumnhwAncpAnInterfacePara1 | read-write | current | In the case of user interface in ATM access, this parameter is valid indicating the VPI of the user interface. 4294967295 is invalid value. |
| 1.3.6.1.4.1.2011.5.110.1.6.1.4 | ColumnhwAncpAnInterfacePara2 | read-write | current | In the case of user interface in ATM access, this parameter is valid indicating the VCI of the user interface. 4294967295 is invalid value. |
| 1.3.6.1.4.1.2011.5.110.1.6.1.5 | ColumnhwAncpAnInterfacePara3 | read-write | current | In the case of user interface in ETH access, this parameter is valid indicating the VLAN of the user. 4294967295 is invalid value. |
| 1.3.6.1.4.1.2011.5.110.1.7 | TablehwAncpAnPartitionTable | not-accessible | current | This table is used to configure the circuit IDs in batches for all ports in a certain partition on an access node. This table can only used to get the circuit … |
| 1.3.6.1.4.1.2011.5.110.1.7.1 | RowhwAncpAnPartitionEntry | not-accessible | current | This table is used to configure the circuit IDs in batches for all ports in a certain partition on an access node. This table can only used to get the circuit … |
| 1.3.6.1.4.1.2011.5.110.1.7.1.1 | ColumnhwAncpAnPartitionId | read-write | current | This object specifies whether the user facing interface is managed by ANCP. |
| 1.3.6.1.4.1.2011.5.110.1.7.1.2 | ColumnhwAncpAnPartitionInterfaceEncapType | read-write | current | This object indicates the access type of the user. Options: 1. atm(1) -indicates the access type of user is ATM 2. eth(2) -indicates the access type of user is… |
| 1.3.6.1.4.1.2011.5.110.1.7.1.3 | ColumnhwAncpAnPartitionInterfacePara1 | read-write | current | In the case of user interface in ATM access, this parameter is valid indicating the VPI of the user interface. 4294967295 is invalid value. Range: 0-4095 |
| 1.3.6.1.4.1.2011.5.110.1.7.1.4 | ColumnhwAncpAnPartitionInterfacePara2 | read-write | current | In the case of user interface in ATM access, this parameter is valid indicating the VCI of the user interface. 4294967295 is invalid value. Range: 32-65535 |
| 1.3.6.1.4.1.2011.5.110.1.7.1.5 | ColumnhwAncpAnPartitionInterfacePara3 | read-write | current | In the case of user interface in ETH or XPON access, this parameter is valid indicating the VLAN of the user. 4294967295 is invalid value. Range: 1-4095 |
| 1.3.6.1.4.1.2011.5.110.1.8 | TablehwAncpAnSessionStatisticTable | not-accessible | current | It is the Huawei proprietary ANCP session statistics table. It is queried to obtain the ANCP session statistics. It supports the query sand clear functions. Th… |
| 1.3.6.1.4.1.2011.5.110.1.8.1 | RowhwAncpAnSessionStatisticEntry | not-accessible | current | It is the Huawei proprietary ANCP session statistics table. It is queried to obtain the ANCP session statistics. It supports the query sand clear functions. Th… |
| 1.3.6.1.4.1.2011.5.110.1.8.1.1 | ColumnhwAncpAnSessionClearStatistics | read-write | current | This object allowed clearing the message statistics of the session. Options: 1. clear(1) -clear the message statistics of the session |
| 1.3.6.1.4.1.2011.5.110.1.8.1.2 | ColumnhwAncpAnSessionStatSentSynMessages | read-only | current | The number of messages that in this session have been sent SYN Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.3 | ColumnhwAncpAnSessionStatSentSynAckMessages | read-only | current | The number of messages that in this session have been sent SYNACK Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.4 | ColumnhwAncpAnSessionStatSentAckMessages | read-only | current | The number of messages that in this session have been sent ACK Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.5 | ColumnhwAncpAnSessionStatSentRstAckMessages | read-only | current | The number of messages that in this session have been sent RSTACK Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.6 | ColumnhwAncpAnSessionStatSentTopoUpMessages | read-only | current | The number of messages that in this session have been sent TOPO up Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.7 | ColumnhwAncpAnSessionStatSentTopoDownMessages | read-only | current | The number of messages that in this session have been sent TOPO down Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.8 | ColumnhwAncpAnSessionStatSentLineCfgMessages | read-only | current | The number of messages that in this session have been sent line config Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.9 | ColumnhwAncpAnSessionStatSentOamMessages | read-only | current | The number of messages that in this session have been sent OAM Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.10 | ColumnhwAncpAnSessionStatSentCacMessages | read-only | current | The number of messages that in this session have been sent CAC Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.11 | ColumnhwAncpAnSessionStatSentCacThresholdMessages | read-only | current | The number of messages that in this session have been sent CAC threshold Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.12 | ColumnhwAncpAnSessionStatSentCacApplyBwMessages | read-only | current | The number of messages that in this session have been sent CAC bandwidth apply Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.13 | ColumnhwAncpAnSessionStatSentFailedMessages | read-only | current | The number of messages that in this session have been sent failed Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.14 | ColumnhwAncpAnSessionStatRcvdSynMessages | read-only | current | The number of messages that in this session have been received SYN Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.15 | ColumnhwAncpAnSessionStatRcvdSynAckMessages | read-only | current | The number of messages that in this session have been received SYNACK Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.16 | ColumnhwAncpAnSessionStatRcvdAckMessages | read-only | current | The number of messages that in this session have been received ACK Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.17 | ColumnhwAncpAnSessionStatRcvdRstAckMessages | read-only | current | The number of messages that in this session have been received RSTACK Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.18 | ColumnhwAncpAnSessionStatRcvdLineCfgMessages | read-only | current | The number of messages that in this session have been received Line Config Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.19 | ColumnhwAncpAnSessionStatRcvdOamMessages | read-only | current | The number of messages that in this session have been received OAM Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.20 | ColumnhwAncpAnSessionStatRcvdCacMessages | read-only | current | The number of messages that in this session have been received CAC Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.21 | ColumnhwAncpAnSessionStatRcvdCacThresholdMessages | read-only | current | The number of messages that in this session have been received CAC threshold Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.22 | ColumnhwAncpAnSessionStatRcvdCacBdApplyMessages | read-only | current | The number of messages that in this session have been received CAC bandwidth apply Message. |
| 1.3.6.1.4.1.2011.5.110.1.8.1.23 | ColumnhwAncpAnSessionStatRcvdUnknownMessages | read-only | current | The number of messages that in this session have been received failed Message. |
| 1.3.6.1.4.1.2011.5.110.1.9 | NodehwAncpAnTraps | |||
| 1.3.6.1.4.1.2011.5.110.1.9.0 | NodehwAncpAnTrapsVbOids | |||
| 1.3.6.1.4.1.2011.5.110.1.9.0.1 | ScalarhwAncpAnSessionUpTrapParaNum | accessible-for-notify | current | Indicates the parameters number of the hwAncpAnSessionUpTrap. |
| 1.3.6.1.4.1.2011.5.110.1.9.0.2 | ScalarhwAncpAnSessionDownTrapParaNum | accessible-for-notify | current | Indicates the parameters number of the hwAncpAnSessionDownTrap. |
| 1.3.6.1.4.1.2011.5.110.1.9.1 | NodehwAncpAnCommonTraps | |||
| 1.3.6.1.4.1.2011.5.110.1.9.1.0 | NodehwAncpAnCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.110.1.9.1.0.1 | NotificationhwAncpAnSessionDownTrap | current | This notification is generated whenever an ANCP session goes down. A session can go down for several reasons: 1) The ANCP session can be deleted by a manager f… | |
| 1.3.6.1.4.1.2011.5.110.1.9.1.0.2 | NotificationhwAncpAnSessionUpTrap | current | This notification is generated when an ANCP session enters the estab state as given by ancpAnCurrentSessionState. Since ancpAnCurrentSessionAnInstance identifi… | |
| 1.3.6.1.4.1.2011.5.110.1.9.1.0.3 | NotificationhwAncpAnSessionDiagnosticTrap | current | If the setup of the connection fails, the DSLAM and the BRAS must generate an appropriate fault/alarm message to the network management system. | |
| 1.3.6.1.4.1.2011.5.110.1.9.1.0.4 | NotificationhwAncpAnSessionDown | current | This notification is generated whenever an ANCP session goes down. A session can go down for several reasons: 1) The ANCP session can be deleted by a manager f… | |
| 1.3.6.1.4.1.2011.5.110.1.9.1.0.5 | NotificationhwAncpAnSessionUp | current | This notification is generated when an ANCP session enters the estab state as given by ancpAnCurrentSessionState. Since ancpAnCurrentSessionAnInstance identifi… | |
| 1.3.6.1.4.1.2011.5.110.1.10 | TablehwAncpAnPonInterfaceConfigTable | not-accessible | current | An entry in the table showing the partition id for a specific user on an ont. The indexes of this table are ifIndex and hwAncpAnPonInterfaceOntId. |
| 1.3.6.1.4.1.2011.5.110.1.10.1 | RowhwAncpAnPonInterfaceConfigEntry | not-accessible | current | An entry in the table showing the partition id for a specific user on an ont. The indexes of this entry are ifIndex and hwAncpAnPonInterfaceOntId. |
| 1.3.6.1.4.1.2011.5.110.1.10.1.1 | ColumnhwAncpAnPonInterfaceOntId | not-accessible | current | Indicates the ONT ID of the user for the ANCP configuration. |
| 1.3.6.1.4.1.2011.5.110.1.10.1.2 | ColumnhwAncpAnPonInterfaceConfigPartitionId | read-write | current | This object specifies whether the user on the ont is managed by ANCP. Default: 0. |
| 1.3.6.1.4.1.2011.5.110.1.10.1.3 | ColumnhwAncpAnPonInterfaceEnable | read-write | current | This object specifies whether the user on the ont is managed by ANCP. Options: 1. true(1) -indicates the user on the ont is managed by ANCP 2. false(2) -indica… |
| 1.3.6.1.4.1.2011.5.110.1.10.1.4 | ColumnhwAncpAnPonInterfaceCvlanid | read-write | current | Indicates the VLAN of the user on the ont is managed by ANCP. Default: 1. |