INFINERA-TP-BANDCTP-MIB
39 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | ifIndex |
| INFINERA-REG-MIB | terminationPoint |
| INFINERA-TC-MIB | FloatArbitraryPrecision FloatTenths InfnALSDisableMode InfnReporting InfnRxEDFAGainMode InfnSlotOperatingMode |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21296.2.2.2.2.2 | IdentitybandCtpMIB | |||
| 1.3.6.1.4.1.21296.2.2.2.2.2.1 | TablebandCtpTable | not-accessible | current | A list of BandCtp entries. Each entry is uniquely identified by the value of ifIndex. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1 | RowbandCtpEntry | not-accessible | current | A BandCtp entry containing information pertaining to Infinera BandCtp interfaces This table is a subclass of IfCommon. Entries will exist in this table only fo… |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.1 | ColumnbandCtpMaxOCGs | read-only | current | Max number Of OCGs supportable in this band. This is not the actual OCGs that are available at any given point. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.2 | ColumnbandCtpChannelPlan | read-only | current | Tells the channel plan of the BMM/OAM. Odd implies the contained OCGs are 1,3,5,7 and even implies that the contained OCGs follow the 2, 4, 6, 8 plan. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.3 | ColumnbandCtpRxExpectedPowerNominal | read-write | current | Expected nominal power value that is configured by the installer. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.4 | ColumnbandCtpSpanLoss1LowThreshold | read-write | current | This value specifies the decrease from ESL. When recived power goes below (ESL - SpanLoss1LowThreshold) the TCC will be set. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.5 | ColumnbandCtpSpanLoss1HighThreshold | read-write | current | This value specifies the increase from ESL. When recived power crosses (ESL + SpanLoss1HighThreshold) the TCC will be set. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.6 | ColumnbandCtpSpanLoss1ThldReporting | read-write | current | This attributes control the reporting of alarm on first gauge. This can be set enabled or disabled. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.7 | ColumnbandCtpExpectedSpanLoss | read-write | current | The expected power on this Fiber. This value is different for different span length, connectors, splices etc. This attribute is configured by the user. The exp… |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.8 | ColumnbandCtpSpanLossReporting | read-write | current | If enabled(2), span loss reporting will proceed based on the provided expectedSpanLoss and maxEngineeredSpanLoss attributes. If set to disabled(1), the spanLos… |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.9 | ColumnbandCtpMaxEngineeredSpanLoss | read-write | current | Span loss information from the route planner. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.10 | ColumnbandCtpALSAction | read-write | current | Flag that indicates the automatic laser shutdown setttings. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.11 | ColumnbandCtpALSDisableTime | read-write | current | The time interval (in minutes) for which ALS will be disabled. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.12 | ColumnbandCtpPmHistStatsEnable | read-write | current | Flag to enable or disable PM collection. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.13 | ColumnbandCtpOprLowThreshold | read-write | current | This object specifies low threshold value for received C band power. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.14 | ColumnbandCtpOprHighThreshold | read-write | current | This object specifies high threshold value for received C band power. |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.15 | ColumnbandCtpCBandOlosSoakTime | read-write | current | |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.16 | ColumnbandCtpSpanLoss2LowThreshold | read-write | current | Span loss-2 Low threshold |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.17 | ColumnbandCtpSpanLoss2HighThreshold | read-write | current | Span loss-2 high threshold |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.18 | ColumnbandCtpSpanLoss2ThldReporting | read-write | current | Span loss-2 threshold reporting enable/disable |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.19 | ColumnbandCtpCustomMargin | read-write | current | Custom margin |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.20 | ColumnbandCtpALSDisableMode | read-write | current | ALS disable mode |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.21 | ColumnbandCtpSlotOperatingMode | read-only | current | Slot Operating Mode |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.22 | ColumnbandCtpTeInterfaceList | read-write | current | TE Interface List |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.23 | ColumnbandCtpRxEDFAGainMode | read-write | current | RX EDFA Gain Mode |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.24 | ColumnbandCtpRxEDFAGainModeValue | read-only | current | RX EDFA Gain Mode Value |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.25 | ColumnbandCtpRxEDFAGain | read-write | current | RX EDFA Gain |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.26 | ColumnbandCtpRxEDFATilt | read-write | current | RX EDFA Tilt |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.27 | ColumnbandCtpTxEDFAInputPowerOffset | read-write | current | TX EDFA Input Power Offset |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.28 | ColumnbandCtpMuxFreqSlotAttenProfile | read-write | current | Mux Frequency Slot Attenuation Profile |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.29 | ColumnbandCtpDemuxFreqSlotAttenProfile | read-write | current | Demux Frequency Slot Attenuation Profile |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.30 | ColumnbandCtpTxVOA | read-write | current | TX EDFA Input Power Offset |
| 1.3.6.1.4.1.21296.2.2.2.2.2.1.1.31 | ColumnbandCtpTargetLineOutputPower | read-write | current | TX EDFA Input Power Offset |
| 1.3.6.1.4.1.21296.2.2.2.2.2.3 | NodebandCtpConformance | |||
| 1.3.6.1.4.1.21296.2.2.2.2.2.3.1 | NodebandCtpCompliances | |||
| 1.3.6.1.4.1.21296.2.2.2.2.2.3.1.1 | CompliancebandCtpCompliance | current | Describes the requirements for conformance to the BANDCTP-MIB | |
| 1.3.6.1.4.1.21296.2.2.2.2.2.3.2 | NodebandCtpGroups | |||
| 1.3.6.1.4.1.21296.2.2.2.2.2.3.2.1 | GroupbandCtpGroup | current | A collection of objects for managing the bandCtp |