INFINERA-TP-DTPCTP-MIB
64 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | ifIndex |
| INFINERA-REG-MIB | terminationPoint |
| INFINERA-TC-MIB | InfnServiceType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21296.2.2.2.2.7 | IdentitydtpCtpMIB | |||
| 1.3.6.1.4.1.21296.2.2.2.2.7.1 | TabledtpCtpTable | not-accessible | current | A list of DtpCtp entries. Each entry is uniquely identified by the value of ifIndex. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1 | RowdtpCtpEntry | not-accessible | current | A DtpCtp entry containing information pertaining to Infinera DtpCtp interfaces. This table is a subclass of IfCommon. Entries will exist in this table only for… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.1 | ColumndtpCtpCfgProtSt | read-only | current | The preferred state of the protection unit. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.2 | ColumndtpCtpProtMod | read-only | current | Protection type viz STDSNCP, DTSNCP or None. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.3 | ColumndtpCtpSwReason | read-only | current | Sw Reason |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.4 | ColumndtpCtpSupportingTP | read-write | current | The corresponding AID of that particular DTPCTP. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.5 | ColumndtpCtpExpectedPayload | read-only | current | Payload expected at this termination point. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.6 | ColumndtpCtpSupportingCircuitIdList | read-only | current | An unordered list of the CircuitId's associated with this groupTp object. This string contains the string representation of each supporting CircuitId, separate… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.7 | ColumndtpCtpDetectedPayload | read-only | current | Payload detected at this termination point. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.8 | ColumndtpCtpDataRate | read-only | current | Applicable to line DTPCTP and indicates the line data rate namley, 2.5G or 10G. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.9 | ColumndtpCtpLoopback | read-write | current | Flag to enable the loopback. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.10 | ColumndtpCtpInsertDtpTti | read-write | current | Flag that enables the TTI string to be entered and monitored at the far end. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.11 | ColumndtpCtpTtiAlarmReporting | read-write | current | Flag that indicates whether TTI alarm should be reported or not. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.12 | ColumndtpCtpTxTtiAlarmReporting | read-write | current | Flag that indicates whether TTI alarm will be reported or not. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.13 | ColumndtpCtpTxDtpTti | read-write | current | The transmitted Dtp trail trace identifier. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.14 | ColumndtpCtpRxDtpTtiWrite | read-write | current | Applicable only for DTPCTP on GT-TAM to transmit the TTI in receive direction. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.15 | ColumndtpCtpExpectedDtpTti | read-write | current | The expected Dtp trail trace identifier. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.16 | ColumndtpCtpExpectedTxDtpTti | read-write | current | The Expected Tx TTI. If this is not equal to the zero-length string and it doesn't match�the recived TTI, an alarm will be raised. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.17 | ColumndtpCtpRxDtpTti | read-only | current | The received Dtp trail trace identifier. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.18 | ColumndtpCtpRecvTxDtpTti | read-only | current | The received transmit Dtp trail trace identifier. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.19 | ColumndtpCtpDtpRxCv15MinutesTce | read-write | current | Count of bit errors detected at the DTF path layer in 15 minutes. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.20 | ColumndtpCtpDtpRxEs15MinutesTce | read-write | current | Count of the number of seconds during which at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 15 minutes. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.21 | ColumndtpCtpDtpRxSes15MinutesTce | read-write | current | Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P def… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.22 | ColumndtpCtpDtpRxUas15MinutesTce | read-write | current | Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DT… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.23 | ColumndtpCtpDtpRxCvDayTce | read-write | current | Count of bit errors detected at the DTF path layer in 24 hours |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.24 | ColumndtpCtpDtpRxEsDayTce | read-write | current | Count of the number of seconds during which at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 24 hours. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.25 | ColumndtpCtpDtpRxSesDayTce | read-write | current | Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P def… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.26 | ColumndtpCtpDtpRxUasDayTce | read-write | current | Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DT… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.27 | ColumndtpCtpDtpTxCv15MinutesTce | read-write | current | Count of bit errors detected at the DTF path layer in 15 minutes. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.28 | ColumndtpCtpDtpTxEs15MinutesTce | read-write | current | Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P defect was present … |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.29 | ColumndtpCtpDtpTxSes15MinutesTce | read-write | current | Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification)or more DTF Path layer BIP errors were detected or an AIS-P defe… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.30 | ColumndtpCtpDtpTxUas15MinutesTce | read-write | current | Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DT… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.31 | ColumndtpCtpDtpTxCvDayTce | read-write | current | Count of bit errors detected at the DTF path layer in 24 hours. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.32 | ColumndtpCtpDtpTxEsDayTce | read-write | current | Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P defect was present … |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.33 | ColumndtpCtpDtpTxSesDayTce | read-write | current | Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification)or more DTF Path layer BIP errors were detected or an AIS-P defe… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.34 | ColumndtpCtpDtpTxUasDayTce | read-write | current | Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DT… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.35 | ColumndtpCtpDtpRxCv15MinutesTceReporting | read-write | current | Flag that enables DtpRxCv15MinutesTce threshold crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.36 | ColumndtpCtpDtpRxEs15MinutesTceReporting | read-write | current | Flag that enables the reporting of DtpRxEs15MinutesTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.37 | ColumndtpCtpDtpRxSes15MinutesTceReporting | read-write | current | Flag that enables the reporting of DtpRxSes15MinutesTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.38 | ColumndtpCtpDtpRxUas15MinutesTceReporting | read-write | current | Flag that enables the reporting of DtpRxUas15MinutesTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.39 | ColumndtpCtpDtpRxCvDayTceReporting | read-write | current | Flag that enables DtpRxCvDayTce threshold crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.40 | ColumndtpCtpDtpRxEsDayTceReporting | read-write | current | Flag that enables the reporting of DtpEsDayTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.41 | ColumndtpCtpDtpRxSesDayTceReporting | read-write | current | Flag that enables the reporting of DtpRxSesDayTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.42 | ColumndtpCtpDtpRxUasDayTceReporting | read-write | current | Flag that enables the reporting of DtpRxUasDayTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.43 | ColumndtpCtpDtpTxCv15MinutesTceReporting | read-write | current | Flag that enables the reporting of DtpTxCv15MinutesTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.44 | ColumndtpCtpDtpTxEs15MinutesTceReporting | read-write | current | Flag that enables the reporting of DtpTxEs15MinutesTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.45 | ColumndtpCtpDtpTxSes15MinutesTceReporting | read-write | current | Flag that enables the reporting of DtpTxSes15MinutesTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.46 | ColumndtpCtpDtpTxUas15MinutesTceReporting | read-write | current | Flag that enables the reporting of DtpTxUas15MinutesTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.47 | ColumndtpCtpDtpTxCvDayTceReporting | read-write | current | Flag that enables the reporting of DtpTxCvDayTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.48 | ColumndtpCtpDtpTxEsDayTceReporting | read-write | current | Flag that enables the reporting of DtpTxEsDayTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.49 | ColumndtpCtpDtpTxSesDayTceReporting | read-write | current | Flag that enables the reporting of DtpTxSesDayTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.50 | ColumndtpCtpDtpTxUasDayTceReporting | read-write | current | Flag that enables the reporting of DtpTxUasDayTce crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.51 | ColumndtpCtpPrbsGenerationMode | read-write | current | Flag which enables the generation of PRBS data on the transmit side. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.52 | ColumndtpCtpPrbsMonitoringMode | read-write | current | Flag which enables the monitoring of bit errors. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.53 | ColumndtpCtpNumDtpSubCh | read-only | current | Number of channels muxed to a channlized cross-connect/snc. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.54 | ColumndtpCtpMuxMode | read-only | current | Flag that indicates whether the DTF is operating in multiplexed-mode (encapsulation of two GbE client tributaries) or not. For 8x1GbE TAM, the Mux mode is �o… |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.55 | ColumndtpCtpPmHistStatsEnable | read-write | current | Flag to enable PM collection. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.1.1.56 | ColumndtpCtpCrossConnectType | read-only | current | The type of cross-connect. |
| 1.3.6.1.4.1.21296.2.2.2.2.7.3 | NodedtpCtpConformance | |||
| 1.3.6.1.4.1.21296.2.2.2.2.7.3.1 | NodedtpCtpCompliances | |||
| 1.3.6.1.4.1.21296.2.2.2.2.7.3.1.1 | CompliancedtpCtpCompliance | current | Describes the requirements for conformance to the DTPCTP-MIB | |
| 1.3.6.1.4.1.21296.2.2.2.2.7.3.2 | NodedtpCtpGroups | |||
| 1.3.6.1.4.1.21296.2.2.2.2.7.3.2.1 | GroupdtpCtpGroup | current | A collection of objects for managing the dtpCtp |