INFINERA-TP-OTUKICTP-MIB
35 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | ifIndex |
| INFINERA-REG-MIB | terminationPoint |
| INFINERA-TC-MIB | FloatTenths InfnArc InfnEnableDisable InfnEqptType InfnMonitoringMode InfnOtuBitRateK InfnServiceMode InfnServiceType InfnSMQ |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21296.2.2.2.2.31 | IdentityotukiCtpMIB | |||
| 1.3.6.1.4.1.21296.2.2.2.2.31.1 | TableotukiCtpTable | not-accessible | current | A list of OtuKiClientCtp entries. Each entry is uniquely identified by the value of ifIndex. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1 | RowotukiCtpEntry | not-accessible | current | A OtuKiClientCtp entry containing information pertaining to Infinera OtuKiClientCtp interfaces. Entries will exist in this table for interfaces of type otuKicl… |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.1 | ColumnotukiCtpServiceMode | read-only | current | 'None� is the default value indicated for the OTU client CTP when it is initially created. OTUk alarms, loopbacks/diagnostics, PMs, etc. are intended to be s… |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.2 | ColumnotukiCtpServiceModeQualifier | read-only | current | The Service Mode Qualifier (SMQ) of the ODU client CTP (i.e., the mode/type of service in which this ODU client CTP is being used,). None� is the default val… |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.3 | ColumnotukiCtpFecCorrection | read-write | current | This atTermute is used to enable or disable the FEC correction at the ingress of the OTU client facility. When Disabled, the FEC statistics are still provided.… |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.4 | ColumnotukiCtpFecEnabled | read-write | current | This atTermute is used to enable or disable the G.709 Fec Generation and handling on the OTU Term interface. If the FECEnabled is FALSE, all zeroes are inserte… |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.5 | ColumnotukiFecDecoderIterationCount | read-write | current | |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.6 | ColumnotukpropagationDelay | read-write | current | |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.7 | ColumnotukiBitRateK | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.8 | ColumnotukiCtpFacTxTTI | read-write | current | The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction). |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.9 | ColumnotukiCtpFacExpectedSAPI | read-write | current | The Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction). |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.10 | ColumnotukiCtpFacExpectedDAPI | read-write | current | The Destination Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction) |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.11 | ColumnotukiCtpFacRxTTI | read-only | current | The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction). |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.12 | ColumnotukiCtpFacPmHistStatsEnable | read-write | current | Flag to enable or disable the collection of PMs on the Terminal side of OTU Clients. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.13 | ColumnotukiCtpFacMonitoringMode | read-only | current | Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side). |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.14 | ColumnotukiCtpFacDSThreshold | read-write | current | This attribute indicates the Facility-side (e.g., Trib-side) threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is decla… |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.15 | ColumnotukiCtpFacSDThreshold | read-write | current | This attribute indicates the Facility-side (e.g.,Trib-side) threshold level for declaring a Degraded Signal defect. A Degraded Signal defect shall be declared … |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.16 | ColumnotukiCtpFacTimDetMode | read-write | current | This atTermute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and the… |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.17 | ColumnotukiCtpSupportingOchList | read-only | current | The Supporting OCH List that is this client is using. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.18 | ColumnotukiCtpRxEb15MinutesTce | read-write | current | Number of ErrorBlock in receive direction during 15 minutes interval. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.19 | ColumnotukiCtpRxEbDayTce | read-write | current | Number of ErrorBlock in receive direction during 24 hours interval. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.20 | ColumnotukiCtpRxDs15MinutesTce | read-write | current | Number of Defect Seconds in receive direction during 15 minutes interval. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.21 | ColumnotukiCtpRxDsDayTce | read-write | current | Number of Defect Seconds in receive direction during 24 hours interval. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.22 | ColumnotukiCtpRxEbDayTceReporting | read-write | current | Flag that enables/disables the reporting of RxEbDayTce threshold crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.23 | ColumnotukiCtpRxEb15MinutesTceReporting | read-write | current | Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.24 | ColumnotukiCtpRxDsDayTceReporting | read-write | current | Flag that enables/disables the reporting of RxDsDayTce threshold crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.25 | ColumnotukiCtpRxDs15MinutesTceReporting | read-write | current | Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing. |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.26 | ColumnotukiCtpAlarmReportControl | read-write | current | The Alarm Reporting Control Flag for the OTU Clients. . |
| 1.3.6.1.4.1.21296.2.2.2.2.31.1.1.27 | ColumnotukiCtpConfiguredServiceType | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.2.2.31.3 | NodeotukiCtpConformance | |||
| 1.3.6.1.4.1.21296.2.2.2.2.31.3.1 | NodeotukiCtpCompliances | |||
| 1.3.6.1.4.1.21296.2.2.2.2.31.3.1.1 | ComplianceotukiCtpCompliance | current | Describes the requirements for conformance to the OTUKICLIENTCTP-MIB | |
| 1.3.6.1.4.1.21296.2.2.2.2.31.3.2 | NodeotukiCtpGroups | |||
| 1.3.6.1.4.1.21296.2.2.2.2.31.3.2.1 | GroupotukiCtpGroup | current | A collection of objects for managing the otukiCtp |