LMP-MIB
215 objects
Copyright (C) 2006 The Internet Society. This version of the MIB module is part of RFC 4631; see the RFC itself for full legal notices. This MIB module contains managed object definitions for the Link Management Protocol (LMP) as defined in 'Link Management Protocol'.
Imported Objects
| IF-MIB | -- RFC 2579 InterfaceIndexOrZero ifIndex |
| INET-ADDRESS-MIB | -- RFC 2863 InetAddressType InetAddress |
| SNMPv2-CONF | -- RFC 2578 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks transmission Unsigned32 |
| SNMPv2-TC | -- RFC 2580 TEXTUAL-CONVENTION RowStatus StorageType TimeStamp TruthValue |
| TE-LINK-STD-MIB | -- RFC 4001 teLinkRemoteIpAddr TeLinkEncodingType teLinkIncomingIfId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.227 | IdentitylmpMIB | Copyright (C) 2006 The Internet Society. This version of the MIB module is part of RFC 4631; see the RFC itself for full legal notices. This MIB module contain… | ||
| 1.3.6.1.2.1.10.227.0 | NodelmpNotifications | |||
| 1.3.6.1.2.1.10.227.0.1 | NotificationlmpTeLinkPropertyMismatch | current | This notification is generated when a TE link property mismatch is detected on the node. The received remote TE link ID of the misconfigured TE link is represe… | |
| 1.3.6.1.2.1.10.227.0.2 | NotificationlmpDataLinkPropertyMismatch | current | This notification is generated when a data-bearing link property mismatch is detected on the node. lmpDataLinkType is used to identify the local identifiers as… | |
| 1.3.6.1.2.1.10.227.0.3 | NotificationlmpUnprotected | current | This notification is generated when there is more than one control channel between LMP neighbors and the last redundant control channel has failed. If the rema… | |
| 1.3.6.1.2.1.10.227.0.4 | NotificationlmpControlChannelUp | current | This notification is generated when a control channel transitions to the up operational state. This notification should not be sent unless lmpCcUpDownNotificat… | |
| 1.3.6.1.2.1.10.227.0.5 | NotificationlmpControlChannelDown | current | This notification is generated when a control channel transitions out of the up operational state. This notification should not be sent unless lmpCcUpDownNotif… | |
| 1.3.6.1.2.1.10.227.0.6 | NotificationlmpTeLinkDegraded | current | This notification is generated when a lmpTeLinkOperStatus object for a TE link enters the degraded state. This notification should not be sent unless lmpTeLink… | |
| 1.3.6.1.2.1.10.227.0.7 | NotificationlmpTeLinkNotDegraded | current | This notification is generated when a lmpTeLinkOperStatus object for a TE link leaves the degraded state. This notification should not be sent unless lmpTeLink… | |
| 1.3.6.1.2.1.10.227.0.8 | NotificationlmpDataLinkVerificationFailure | current | This notification is generated when a data-bearing link verification fails. This notification should not be sent unless lmpDataLinkNotificationsEnabled is true… | |
| 1.3.6.1.2.1.10.227.1 | NodelmpObjects | |||
| 1.3.6.1.2.1.10.227.1.1 | ScalarlmpAdminStatus | read-write | current | The desired operational status of LMP on the node. Implementations should save the value of this object in persistent memory so that it survives restarts or re… |
| 1.3.6.1.2.1.10.227.1.2 | ScalarlmpOperStatus | read-only | current | The actual operational status of LMP on the node. |
| 1.3.6.1.2.1.10.227.1.3 | TablelmpNbrTable | not-accessible | current | This table specifies the neighbor node(s) to which control channels may be established. |
| 1.3.6.1.2.1.10.227.1.3.1 | RowlmpNbrEntry | not-accessible | current | An entry in this table is created by a LMP-enabled device for every pair of nodes that can establish control channels. |
| 1.3.6.1.2.1.10.227.1.3.1.1 | ColumnlmpNbrNodeId | not-accessible | current | This is a unique index for an entry in the LmpNbrTable. This value represents the remote Node ID. |
| 1.3.6.1.2.1.10.227.1.3.1.2 | ColumnlmpNbrRetransmitInterval | read-create | current | This object specifies the initial retransmission interval that is used for the retransmission of messages that require acknowledgement. This object, along with… |
| 1.3.6.1.2.1.10.227.1.3.1.3 | ColumnlmpNbrRetryLimit | read-create | current | This object specifies the maximum number of times a message is transmitted without being acknowledged. A value of 0 is used to indicate that a node should neve… |
| 1.3.6.1.2.1.10.227.1.3.1.4 | ColumnlmpNbrRetransmitDelta | read-create | current | This object governs the speed with which the sender increases the retransmission interval, as explained in Section 10 of the Link Management Protocol specifica… |
| 1.3.6.1.2.1.10.227.1.3.1.5 | ColumnlmpNbrAdminStatus | read-create | current | The desired operational status of LMP to this remote node. |
| 1.3.6.1.2.1.10.227.1.3.1.6 | ColumnlmpNbrOperStatus | read-only | current | The actual operational status of LMP to this remote node. |
| 1.3.6.1.2.1.10.227.1.3.1.7 | ColumnlmpNbrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). Al… |
| 1.3.6.1.2.1.10.227.1.3.1.8 | ColumnlmpNbrStorageType | read-create | current | The storage type for this conceptual row in the lmpNbrTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in… |
| 1.3.6.1.2.1.10.227.1.4 | ScalarlmpCcHelloIntervalDefault | read-write | current | This object specifies the default value for the HelloInterval parameter used in the Hello protocol keep-alive phase. It indicates how frequently LMP Hello mess… |
| 1.3.6.1.2.1.10.227.1.5 | ScalarlmpCcHelloIntervalDefaultMin | read-write | current | This object specifies the default minimum value for the HelloInterval parameter. It is used as a default value for lmpCcHelloIntervalMin. Implementations shoul… |
| 1.3.6.1.2.1.10.227.1.6 | ScalarlmpCcHelloIntervalDefaultMax | read-write | current | This object specifies the default maximum value for the HelloInterval parameter. It is used as a default value for lmpCcHelloIntervalMax. Implementations shoul… |
| 1.3.6.1.2.1.10.227.1.7 | ScalarlmpCcHelloDeadIntervalDefault | read-write | current | This object specifies the default HelloDeadInterval parameter to use in the Hello protocol keep-alive phase. It indicates how long a device should wait before … |
| 1.3.6.1.2.1.10.227.1.8 | ScalarlmpCcHelloDeadIntervalDefaultMin | read-write | current | This object specifies the default minimum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHelloDeadIntervalMin. Implementatio… |
| 1.3.6.1.2.1.10.227.1.9 | ScalarlmpCcHelloDeadIntervalDefaultMax | read-write | current | This object specifies the default maximum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHelloDeadIntervalMax. Implementatio… |
| 1.3.6.1.2.1.10.227.1.10 | TablelmpControlChannelTable | not-accessible | current | This table specifies LMP control channel information. |
| 1.3.6.1.2.1.10.227.1.10.1 | RowlmpControlChannelEntry | not-accessible | current | An entry in this table is created by an LMP-enabled device for every control channel. Whenever a new entry is created with lmpCcIsIf set to true(1), a correspo… |
| 1.3.6.1.2.1.10.227.1.10.1.1 | ColumnlmpCcId | not-accessible | current | This value represents the local control channel identifier. The control channel identifier is a non-zero 32-bit number. |
| 1.3.6.1.2.1.10.227.1.10.1.2 | ColumnlmpCcUnderlyingIfIndex | read-create | current | If lmpCcIsIf is set to true(1), this object carries the index into the ifTable of the entry that represents the LMP interface over which LMP will transmit its … |
| 1.3.6.1.2.1.10.227.1.10.1.3 | ColumnlmpCcIsIf | read-create | current | In implementations where the control channels are modeled as interfaces, the value of this object is true(1), and this control channel is represented by an int… |
| 1.3.6.1.2.1.10.227.1.10.1.4 | ColumnlmpCcNbrNodeId | read-create | current | This is the Node ID of the control channel remote node. This value either is configured or gets created by the node when a Config message is received or when a… |
| 1.3.6.1.2.1.10.227.1.10.1.5 | ColumnlmpCcRemoteId | read-only | current | This value represents the remote control channel identifier (32-bit number). It is determined during the negotiation phase. A value of zero means that the remo… |
| 1.3.6.1.2.1.10.227.1.10.1.6 | ColumnlmpCcRemoteAddressType | read-create | current | This value represents the remote control channel IP address type. In point-to-point configuration, this value can be set to unknown(0). |
| 1.3.6.1.2.1.10.227.1.10.1.7 | ColumnlmpCcRemoteIpAddr | read-create | current | This value represents the remote control channel Internet address for numbered control channel. The type of this address is determined by lmpCcRemoteAddressTyp… |
| 1.3.6.1.2.1.10.227.1.10.1.8 | ColumnlmpCcSetupRole | read-create | current | The role that this node should take during establishment of this control channel. An active node will initiate establishment. A passive node will wait for the … |
| 1.3.6.1.2.1.10.227.1.10.1.9 | ColumnlmpCcAuthentication | read-create | current | This object indicates whether the control channel must use authentication. |
| 1.3.6.1.2.1.10.227.1.10.1.10 | ColumnlmpCcHelloInterval | read-create | current | This object specifies the value of the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalDefault. |
| 1.3.6.1.2.1.10.227.1.10.1.11 | ColumnlmpCcHelloIntervalMin | read-create | current | This object specifies the minimum value for the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMinDefault. |
| 1.3.6.1.2.1.10.227.1.10.1.12 | ColumnlmpCcHelloIntervalMax | read-create | current | This object specifies the maximum value for the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMaxDefault. |
| 1.3.6.1.2.1.10.227.1.10.1.13 | ColumnlmpCcHelloIntervalNegotiated | read-only | current | Once the control channel is active, this object represents the negotiated HelloInterval value. |
| 1.3.6.1.2.1.10.227.1.10.1.14 | ColumnlmpCcHelloDeadInterval | read-create | current | This object specifies the value of the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloDeadIntervalDefault. |
| 1.3.6.1.2.1.10.227.1.10.1.15 | ColumnlmpCcHelloDeadIntervalMin | read-create | current | This object specifies the minimum value for the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloDeadIntervalMinDefaul… |
| 1.3.6.1.2.1.10.227.1.10.1.16 | ColumnlmpCcHelloDeadIntervalMax | read-create | current | This object specifies the maximum value for the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMaxDefault. |
| 1.3.6.1.2.1.10.227.1.10.1.17 | ColumnlmpCcHelloDeadIntervalNegotiated | read-only | current | Once the control channel is active, this object represents the negotiated HelloDeadInterval value. |
| 1.3.6.1.2.1.10.227.1.10.1.18 | ColumnlmpCcLastChange | read-only | current | The value of sysUpTime at the time the control channel entered its current operational state. If the current state was entered prior to the last re-initializat… |
| 1.3.6.1.2.1.10.227.1.10.1.19 | ColumnlmpCcAdminStatus | read-create | current | The desired operational status of this control channel. |
| 1.3.6.1.2.1.10.227.1.10.1.20 | ColumnlmpCcOperStatus | read-only | current | The actual operational status of this control channel. |
| 1.3.6.1.2.1.10.227.1.10.1.21 | ColumnlmpCcRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). Al… |
| 1.3.6.1.2.1.10.227.1.10.1.22 | ColumnlmpCcStorageType | read-create | current | The storage type for this conceptual row in the lmpControlChannelTable. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.2.1.10.227.1.11 | TablelmpControlChannelPerfTable | not-accessible | current | This table specifies LMP control channel performance counters. |
| 1.3.6.1.2.1.10.227.1.11.1 | RowlmpControlChannelPerfEntry | not-accessible | current | An entry in this table is created by a LMP-enabled device for every control channel. lmpCcCounterDiscontinuityTime is used to indicate potential discontinuity … |
| 1.3.6.1.2.1.10.227.1.11.1.1 | ColumnlmpCcInOctets | read-only | current | The total number of LMP message octets received on the control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.2 | ColumnlmpCcInDiscards | read-only | current | The number of inbound packets that were chosen to be discarded even though no errors had been detected. One possible reason for discarding such a packet could … |
| 1.3.6.1.2.1.10.227.1.11.1.3 | ColumnlmpCcInErrors | read-only | current | The number of inbound packets that contained errors preventing them from being processed by LMP. |
| 1.3.6.1.2.1.10.227.1.11.1.4 | ColumnlmpCcOutOctets | read-only | current | The total number of LMP message octets transmitted out of the control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.5 | ColumnlmpCcOutDiscards | read-only | current | The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason… |
| 1.3.6.1.2.1.10.227.1.11.1.6 | ColumnlmpCcOutErrors | read-only | current | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.2.1.10.227.1.11.1.7 | ColumnlmpCcConfigReceived | read-only | current | This object counts the number of Config messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.8 | ColumnlmpCcConfigSent | read-only | current | This object counts the number of Config messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.9 | ColumnlmpCcConfigRetransmit | read-only | current | This object counts the number of Config messages that have been retransmitted over this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.10 | ColumnlmpCcConfigAckReceived | read-only | current | This object counts the number of ConfigAck messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.11 | ColumnlmpCcConfigAckSent | read-only | current | This object counts the number of ConfigAck messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.12 | ColumnlmpCcConfigNackReceived | read-only | current | This object counts the number of ConfigNack messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.13 | ColumnlmpCcConfigNackSent | read-only | current | This object counts the number of ConfigNack messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.14 | ColumnlmpCcHelloReceived | read-only | current | This object counts the number of Hello messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.15 | ColumnlmpCcHelloSent | read-only | current | This object counts the number of Hello messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.16 | ColumnlmpCcBeginVerifyReceived | read-only | current | This object counts the number of BeginVerify messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.17 | ColumnlmpCcBeginVerifySent | read-only | current | This object counts the number of BeginVerify messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.18 | ColumnlmpCcBeginVerifyRetransmit | read-only | current | This object counts the number of BeginVerify messages that have been retransmitted over this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.19 | ColumnlmpCcBeginVerifyAckReceived | read-only | current | This object counts the number of BeginVerifyAck messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.20 | ColumnlmpCcBeginVerifyAckSent | read-only | current | This object counts the number of BeginVerifyAck messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.21 | ColumnlmpCcBeginVerifyNackReceived | read-only | current | This object counts the number of BeginVerifyNack messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.22 | ColumnlmpCcBeginVerifyNackSent | read-only | current | This object counts the number of BeginVerifyNack messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.23 | ColumnlmpCcEndVerifyReceived | read-only | current | This object counts the number of EndVerify messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.24 | ColumnlmpCcEndVerifySent | read-only | current | This object counts the number of EndVerify messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.25 | ColumnlmpCcEndVerifyRetransmit | read-only | current | This object counts the number of EndVerify messages that have been retransmitted over this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.26 | ColumnlmpCcEndVerifyAckReceived | read-only | current | This object counts the number of EndVerifyAck messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.27 | ColumnlmpCcEndVerifyAckSent | read-only | current | This object counts the number of EndVerifyAck messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.28 | ColumnlmpCcTestStatusSuccessReceived | read-only | current | This object counts the number of TestStatusSuccess messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.29 | ColumnlmpCcTestStatusSuccessSent | read-only | current | This object counts the number of TestStatusSuccess messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.30 | ColumnlmpCcTestStatusSuccessRetransmit | read-only | current | This object counts the number of TestStatusSuccess messages that have been retransmitted over this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.31 | ColumnlmpCcTestStatusFailureReceived | read-only | current | This object counts the number of TestStatusFailure messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.32 | ColumnlmpCcTestStatusFailureSent | read-only | current | This object counts the number of TestStatusFailure messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.33 | ColumnlmpCcTestStatusFailureRetransmit | read-only | current | This object counts the number of TestStatusFailure messages that have been retransmitted over this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.34 | ColumnlmpCcTestStatusAckReceived | read-only | current | This object counts the number of TestStatusAck messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.35 | ColumnlmpCcTestStatusAckSent | read-only | current | This object counts the number of TestStatusAck messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.36 | ColumnlmpCcLinkSummaryReceived | read-only | current | This object counts the number of LinkSummary messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.37 | ColumnlmpCcLinkSummarySent | read-only | current | This object counts the number of LinkSummary messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.38 | ColumnlmpCcLinkSummaryRetransmit | read-only | current | This object counts the number of LinkSummary messages that have been retransmitted over this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.39 | ColumnlmpCcLinkSummaryAckReceived | read-only | current | This object counts the number of LinkSummaryAck messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.40 | ColumnlmpCcLinkSummaryAckSent | read-only | current | This object counts the number of LinkSummaryAck messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.41 | ColumnlmpCcLinkSummaryNackReceived | read-only | current | This object counts the number of LinkSummaryNack messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.42 | ColumnlmpCcLinkSummaryNackSent | read-only | current | This object counts the number of LinkSummaryNack messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.43 | ColumnlmpCcChannelStatusReceived | read-only | current | This object counts the number of ChannelStatus messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.44 | ColumnlmpCcChannelStatusSent | read-only | current | This object counts the number of ChannelStatus messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.45 | ColumnlmpCcChannelStatusRetransmit | read-only | current | This object counts the number of ChannelStatus messages that have been retransmitted on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.46 | ColumnlmpCcChannelStatusAckReceived | read-only | current | This object counts the number of ChannelStatusAck messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.47 | ColumnlmpCcChannelStatusAckSent | read-only | current | This object counts the number of ChannelStatus messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.48 | ColumnlmpCcChannelStatusReqReceived | read-only | current | This object counts the number of ChannelStatusRequest messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.49 | ColumnlmpCcChannelStatusReqSent | read-only | current | This object counts the number of ChannelStatusRequest messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.50 | ColumnlmpCcChannelStatusReqRetransmit | read-only | current | This object counts the number of ChannelStatusRequest messages that have been retransmitted on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.51 | ColumnlmpCcChannelStatusRspReceived | read-only | current | This object counts the number of ChannelStatusResponse messages that have been received on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.52 | ColumnlmpCcChannelStatusRspSent | read-only | current | This object counts the number of ChannelStatusResponse messages that have been sent on this control channel. |
| 1.3.6.1.2.1.10.227.1.11.1.53 | ColumnlmpCcCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which one or more of this control channel's counters suffered a discontinuity. The relevant counters are … |
| 1.3.6.1.2.1.10.227.1.12 | TablelmpTeLinkTable | not-accessible | current | This table specifies the LMP-specific TE link information. Overall TE link information is kept in three separate tables: ifTable for interface-specific informa… |
| 1.3.6.1.2.1.10.227.1.12.1 | RowlmpTeLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry with an ifType of teLink(200) that is managed by LMP. An ifEntry with an ifIndex must exist before the correspon… |
| 1.3.6.1.2.1.10.227.1.12.1.1 | ColumnlmpTeLinkNbrRemoteNodeId | read-create | current | This is the Node ID of the TE link remote node. This value may be learned during the control channel parameter negotiation phase (in the Config message). Node … |
| 1.3.6.1.2.1.10.227.1.12.1.2 | ColumnlmpTeLinkVerification | read-create | current | This object indicates whether the LMP link verification procedure is enabled for this TE link. |
| 1.3.6.1.2.1.10.227.1.12.1.3 | ColumnlmpTeLinkFaultManagement | read-create | current | This object indicates whether the LMP fault management procedure is enabled on this TE link. |
| 1.3.6.1.2.1.10.227.1.12.1.4 | ColumnlmpTeLinkDwdm | read-create | current | This object indicates whether the LMP DWDM procedure is enabled on this TE link. |
| 1.3.6.1.2.1.10.227.1.12.1.5 | ColumnlmpTeLinkOperStatus | read-only | current | The actual operational status of this TE link. The status is set to testing when the TE link is performing link verification. A degraded state indicates that t… |
| 1.3.6.1.2.1.10.227.1.12.1.6 | ColumnlmpTeLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). Al… |
| 1.3.6.1.2.1.10.227.1.12.1.7 | ColumnlmpTeLinkStorageType | read-create | current | The storage type for this conceptual row in the lmpTeLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object… |
| 1.3.6.1.2.1.10.227.1.13 | ScalarlmpGlobalLinkVerificationInterval | read-write | current | This object indicates how often the link verification procedure is executed. The interval is in milliseconds. A value of 0 is used to indicate that the link ve… |
| 1.3.6.1.2.1.10.227.1.14 | TablelmpLinkVerificationTable | not-accessible | current | This table specifies TE link information associated with the LMP verification procedure. |
| 1.3.6.1.2.1.10.227.1.14.1 | RowlmpLinkVerificationEntry | not-accessible | current | An entry in this table is created by an LMP-enabled device for every TE link that supports the LMP verification procedure. |
| 1.3.6.1.2.1.10.227.1.14.1.1 | ColumnlmpLinkVerifyInterval | read-create | current | This object specifies the VerifyInterval parameter used in the LMP link verification process. It indicates the interval at which the Test messages are sent. |
| 1.3.6.1.2.1.10.227.1.14.1.2 | ColumnlmpLinkVerifyDeadInterval | read-create | current | This object specifies the VerifyDeadInterval parameter used in the verification of the physical connectivity of data- bearing links. It specifies the observati… |
| 1.3.6.1.2.1.10.227.1.14.1.3 | ColumnlmpLinkVerifyTransportMechanism | read-create | current | This defines the transport mechanism for the Test messages. The scope of this bit mask is restricted to each link encoding type. The local node will set the bi… |
| 1.3.6.1.2.1.10.227.1.14.1.4 | ColumnlmpLinkVerifyAllLinks | read-create | current | A value of true(1) for this object indicates that the verification process checks all unallocated links; otherwise, only the new ports or component links that … |
| 1.3.6.1.2.1.10.227.1.14.1.5 | ColumnlmpLinkVerifyTransmissionRate | read-create | current | This is the transmission rate of the data link over which the Test messages will be transmitted and is expressed in bytes per second. |
| 1.3.6.1.2.1.10.227.1.14.1.6 | ColumnlmpLinkVerifyWavelength | read-create | current | This value corresponds to the wavelength at which the Test messages will be transmitted and is measured in nanometers (nm). If each data-bearing link correspon… |
| 1.3.6.1.2.1.10.227.1.14.1.7 | ColumnlmpLinkVerifyRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). Al… |
| 1.3.6.1.2.1.10.227.1.14.1.8 | ColumnlmpLinkVerifyStorageType | read-create | current | The storage type for this conceptual row in the lmpLinkVerificationTable. Conceptual rows having the value 'permanent' need not allow write-access to any colum… |
| 1.3.6.1.2.1.10.227.1.15 | TablelmpTeLinkPerfTable | not-accessible | current | This table specifies LMP TE link performance counters. |
| 1.3.6.1.2.1.10.227.1.15.1 | RowlmpTeLinkPerfEntry | not-accessible | current | An entry in this table is created by an LMP-enabled device for every TE link. lmpTeCounterDiscontinuityTime is used to indicate potential discontinuity for all… |
| 1.3.6.1.2.1.10.227.1.15.1.1 | ColumnlmpTeInOctets | read-only | current | The total number of LMP message octets received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.2 | ColumnlmpTeOutOctets | read-only | current | The total number of LMP message octets transmitted out for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.3 | ColumnlmpTeBeginVerifyReceived | read-only | current | This object counts the number of BeginVerify messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.4 | ColumnlmpTeBeginVerifySent | read-only | current | This object counts the number of BeginVerify messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.5 | ColumnlmpTeBeginVerifyRetransmit | read-only | current | This object counts the number of BeginVerify messages that have been retransmitted for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.6 | ColumnlmpTeBeginVerifyAckReceived | read-only | current | This object counts the number of BeginVerifyAck messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.7 | ColumnlmpTeBeginVerifyAckSent | read-only | current | This object counts the number of BeginVerifyAck messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.8 | ColumnlmpTeBeginVerifyNackReceived | read-only | current | This object counts the number of BeginVerifyNack messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.9 | ColumnlmpTeBeginVerifyNackSent | read-only | current | This object counts the number of BeginVerifyNack messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.10 | ColumnlmpTeEndVerifyReceived | read-only | current | This object counts the number of EndVerify messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.11 | ColumnlmpTeEndVerifySent | read-only | current | This object counts the number of EndVerify messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.12 | ColumnlmpTeEndVerifyRetransmit | read-only | current | This object counts the number of EndVerify messages that have been retransmitted over this control channel. |
| 1.3.6.1.2.1.10.227.1.15.1.13 | ColumnlmpTeEndVerifyAckReceived | read-only | current | This object counts the number of EndVerifyAck messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.14 | ColumnlmpTeEndVerifyAckSent | read-only | current | This object counts the number of EndVerifyAck messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.15 | ColumnlmpTeTestStatusSuccessReceived | read-only | current | This object counts the number of TestStatusSuccess messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.16 | ColumnlmpTeTestStatusSuccessSent | read-only | current | This object counts the number of TestStatusSuccess messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.17 | ColumnlmpTeTestStatusSuccessRetransmit | read-only | current | This object counts the number of TestStatusSuccess messages that have been retransmitted for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.18 | ColumnlmpTeTestStatusFailureReceived | read-only | current | This object counts the number of TestStatusFailure messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.19 | ColumnlmpTeTestStatusFailureSent | read-only | current | This object counts the number of TestStatusFailure messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.20 | ColumnlmpTeTestStatusFailureRetransmit | read-only | current | This object counts the number of TestStatusFailure messages that have been retransmitted on this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.21 | ColumnlmpTeTestStatusAckReceived | read-only | current | This object counts the number of TestStatusAck messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.22 | ColumnlmpTeTestStatusAckSent | read-only | current | This object counts the number of TestStatusAck messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.23 | ColumnlmpTeLinkSummaryReceived | read-only | current | This object counts the number of LinkSummary messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.24 | ColumnlmpTeLinkSummarySent | read-only | current | This object counts the number of LinkSummary messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.25 | ColumnlmpTeLinkSummaryRetransmit | read-only | current | This object counts the number of LinkSummary messages that have been retransmitted over this control channel. |
| 1.3.6.1.2.1.10.227.1.15.1.26 | ColumnlmpTeLinkSummaryAckReceived | read-only | current | This object counts the number of LinkSummaryAck messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.27 | ColumnlmpTeLinkSummaryAckSent | read-only | current | This object counts the number of LinkSummaryAck messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.28 | ColumnlmpTeLinkSummaryNackReceived | read-only | current | This object counts the number of LinkSummaryNack messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.29 | ColumnlmpTeLinkSummaryNackSent | read-only | current | This object counts the number of LinkSummaryNack messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.30 | ColumnlmpTeChannelStatusReceived | read-only | current | This object counts the number of ChannelStatus messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.31 | ColumnlmpTeChannelStatusSent | read-only | current | This object counts the number of ChannelStatus messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.32 | ColumnlmpTeChannelStatusRetransmit | read-only | current | This object counts the number of ChannelStatus messages that have been retransmitted for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.33 | ColumnlmpTeChannelStatusAckReceived | read-only | current | This object counts the number of ChannelStatusAck messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.34 | ColumnlmpTeChannelStatusAckSent | read-only | current | This object counts the number of ChannelStatus messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.35 | ColumnlmpTeChannelStatusReqReceived | read-only | current | This object counts the number of ChannelStatusRequest messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.36 | ColumnlmpTeChannelStatusReqSent | read-only | current | This object counts the number of ChannelStatusRequest messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.37 | ColumnlmpTeChannelStatusReqRetransmit | read-only | current | This object counts the number of ChannelStatusRequest messages that have been retransmitted for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.38 | ColumnlmpTeChannelStatusRspReceived | read-only | current | This object counts the number of ChannelStatusResponse messages that have been received for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.39 | ColumnlmpTeChannelStatusRspSent | read-only | current | This object counts the number of ChannelStatusResponse messages that have been sent for this TE link. |
| 1.3.6.1.2.1.10.227.1.15.1.40 | ColumnlmpTeCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which one or more of this TE link's counters suffered a discontinuity. The relevant counters are the spec… |
| 1.3.6.1.2.1.10.227.1.16 | TablelmpDataLinkTable | not-accessible | current | This table specifies the data-bearing links managed by the LMP. |
| 1.3.6.1.2.1.10.227.1.16.1 | RowlmpDataLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry that represents a data-bearing link. An ifEntry with an ifIndex must exist before the corresponding lmpDataLinkE… |
| 1.3.6.1.2.1.10.227.1.16.1.1 | ColumnlmpDataLinkType | read-only | current | This attribute specifies whether this data-bearing link is a port or a component link. Component links are multiplex capable, whereas ports are not multiplex c… |
| 1.3.6.1.2.1.10.227.1.16.1.2 | ColumnlmpDataLinkAddressType | read-create | current | This attribute specifies the data-bearing link IP address type. If the data-bearing link is unnumbered, the address type must be set to unknown(0). |
| 1.3.6.1.2.1.10.227.1.16.1.3 | ColumnlmpDataLinkIpAddr | read-create | current | The local Internet address for numbered links. The type of this address is determined by the value of lmpDataLinkAddressType object. For IPv4 and IPv6 numbered… |
| 1.3.6.1.2.1.10.227.1.16.1.4 | ColumnlmpDataLinkRemoteIpAddress | read-create | current | The remote Internet address for numbered data-bearing links. The type of this address is determined by the lmpDataLinkAddressType object. For IPv4 and IPv6 num… |
| 1.3.6.1.2.1.10.227.1.16.1.5 | ColumnlmpDataLinkRemoteIfId | read-create | current | Interface identifier of the remote end point. This information is either configured manually or communicated by the remote node during the link verification pr… |
| 1.3.6.1.2.1.10.227.1.16.1.6 | ColumnlmpDataLinkEncodingType | read-create | current | The encoding type of the data-bearing link. |
| 1.3.6.1.2.1.10.227.1.16.1.7 | ColumnlmpDataLinkActiveOperStatus | read-only | current | The actual operational status of this data-bearing link (active FSM). |
| 1.3.6.1.2.1.10.227.1.16.1.8 | ColumnlmpDataLinkPassiveOperStatus | read-only | current | The actual operational status of this data-bearing link (passive FSM). |
| 1.3.6.1.2.1.10.227.1.16.1.9 | ColumnlmpDataLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). Al… |
| 1.3.6.1.2.1.10.227.1.16.1.10 | ColumnlmpDataLinkStorageType | read-create | current | The storage type for this conceptual row in the lmpDataLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar obje… |
| 1.3.6.1.2.1.10.227.1.17 | TablelmpDataLinkPerfTable | not-accessible | current | This table specifies the data-bearing links LMP performance counters. |
| 1.3.6.1.2.1.10.227.1.17.1 | RowlmpDataLinkPerfEntry | not-accessible | current | An entry in this table contains information about the LMP performance counters for the data-bearing links. lmpDataLinkDiscontinuityTime is used to indicate pot… |
| 1.3.6.1.2.1.10.227.1.17.1.1 | ColumnlmpDataLinkTestReceived | read-only | current | This object counts the number of Test messages that have been received on this data-bearing link. |
| 1.3.6.1.2.1.10.227.1.17.1.2 | ColumnlmpDataLinkTestSent | read-only | current | This object counts the number of Test messages that have been sent on this data-bearing link. |
| 1.3.6.1.2.1.10.227.1.17.1.3 | ColumnlmpDataLinkActiveTestSuccess | read-only | current | This object counts the number of data-bearing link tests that were successful on the active side of this data- bearing link. |
| 1.3.6.1.2.1.10.227.1.17.1.4 | ColumnlmpDataLinkActiveTestFailure | read-only | current | This object counts the number of data-bearing link tests that failed on the active side of this data-bearing link. |
| 1.3.6.1.2.1.10.227.1.17.1.5 | ColumnlmpDataLinkPassiveTestSuccess | read-only | current | This object counts the number of data-bearing link tests that were successful on the passive side of this data- bearing link. |
| 1.3.6.1.2.1.10.227.1.17.1.6 | ColumnlmpDataLinkPassiveTestFailure | read-only | current | This object counts the number of data-bearing link tests that failed on the passive side of this data-bearing link. |
| 1.3.6.1.2.1.10.227.1.17.1.7 | ColumnlmpDataLinkDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which one or more of this data-bearing link's counters suffered a discontinuity. The relevant counters ar… |
| 1.3.6.1.2.1.10.227.1.18 | ScalarlmpNotificationMaxRate | read-write | current | The LMP notification rate depends on the size of the network, the type of links, the network configuration, the reliability of the network, etc. When this MIB … |
| 1.3.6.1.2.1.10.227.1.19 | ScalarlmpLinkPropertyNotificationsEnabled | read-write | current | If this object is true(1), then it enables the generation of lmpTeLinkPropertyMismatch and lmpDataLinkPropertyMismatch notifications; otherwise, these notifica… |
| 1.3.6.1.2.1.10.227.1.20 | ScalarlmpUnprotectedNotificationsEnabled | read-write | current | If this object is true(1), then it enables the generation of lmpUnprotected notifications; otherwise, these notifications are not emitted. Implementations shou… |
| 1.3.6.1.2.1.10.227.1.21 | ScalarlmpCcUpDownNotificationsEnabled | read-write | current | If this object is true(1), then it enables the generation of lmpControlChannelUp and lmpControlChannelDown notifications; otherwise, these notifications are no… |
| 1.3.6.1.2.1.10.227.1.22 | ScalarlmpTeLinkNotificationsEnabled | read-write | current | If this object is true(1), then it enables the generation of lmpTeLinkDegraded and lmpTeLinkNotDegraded notifications; otherwise, these notifications are not e… |
| 1.3.6.1.2.1.10.227.1.23 | ScalarlmpDataLinkNotificationsEnabled | read-write | current | If this object is true(1), then it enables the generation of lmpDataLinkVerificationFailure notification; otherwise, these notifications are not emitted. Imple… |
| 1.3.6.1.2.1.10.227.2 | NodelmpConformance | |||
| 1.3.6.1.2.1.10.227.2.1 | NodelmpCompliances | |||
| 1.3.6.1.2.1.10.227.2.1.1 | CompliancelmpModuleFullCompliance | current | Compliance statement for agents that support the configuration and monitoring of LMP MIB. | |
| 1.3.6.1.2.1.10.227.2.1.2 | CompliancelmpModuleReadOnlyCompliance | read-only | current | Compliance statement for agents that support the monitoring of the LMP MIB. |
| 1.3.6.1.2.1.10.227.2.2 | NodelmpGroups | |||
| 1.3.6.1.2.1.10.227.2.2.1 | GrouplmpNodeGroup | current | Collection of objects that represent LMP node configuration. | |
| 1.3.6.1.2.1.10.227.2.2.2 | GrouplmpControlChannelGroup | current | Objects that can be used to configure LMP interface. | |
| 1.3.6.1.2.1.10.227.2.2.3 | GrouplmpCcIsInterfaceGroup | current | Objects that can be used to configure control channels that are interfaces. | |
| 1.3.6.1.2.1.10.227.2.2.4 | GrouplmpCcIsNotInterfaceGroup | current | Objects that can be used to configure control channels that are not interfaces. | |
| 1.3.6.1.2.1.10.227.2.2.5 | GrouplmpLinkPropertyCorrelationGroup | current | Collection of objects used to configure the link property correlation procedure. | |
| 1.3.6.1.2.1.10.227.2.2.6 | GrouplmpLinkVerificationGroup | current | Collection of objects that represent the link verification procedure configuration. | |
| 1.3.6.1.2.1.10.227.2.2.7 | GrouplmpPerfGroup | current | Collection of objects used to provide performance information about LMP interfaces and data-bearing links. | |
| 1.3.6.1.2.1.10.227.2.2.8 | GrouplmpTeLinkGroup | current | Objects that can be used to configure TE links. | |
| 1.3.6.1.2.1.10.227.2.2.9 | GrouplmpDataLinkGroup | current | Collection of objects that represent data-bearing link configuration. | |
| 1.3.6.1.2.1.10.227.2.2.10 | GrouplmpNotificationGroup | current | Set of notifications defined in this module. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LmpInterval | Unsigned32 (1..65535) | current | The interval delay, in milliseconds. |
| LmpNodeId | OCTET STRING(SIZE(4)) | current | Represents a Node ID in network byte order. Node ID is an address of type IPv4. |
| LmpRetransmitInterval | Unsigned32 (1..4294967295) | current | The retransmission interval delay in milliseconds. |