MIB Viewer

LUM-DCN-MIB

174 objects
The DCN mib.
Imported Objects
LUM-REGlumDcnMIB lumModules
LUM-TCBoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString FaultStatus LambdaFrequency MgmtNameString ObjectProperty PortNumber SlotNumber SubrackNumber
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.21IdentitylumDcnMIBModuleThe DCN mib.
1.3.6.1.4.1.8708.2.20.1NodelumDcnConfs
1.3.6.1.4.1.8708.2.20.1.1NodelumDcnGroups
1.3.6.1.4.1.8708.2.20.1.1.1GroupdcnGeneralGroupdeprecatedThe general objects.
1.3.6.1.4.1.8708.2.20.1.1.2GroupdcnIfGroupdeprecatedThe dcn interface objects.
1.3.6.1.4.1.8708.2.20.1.1.3GroupdcnNotificationGroupcurrentThe dcn notifications.
1.3.6.1.4.1.8708.2.20.1.1.4GroupdcnPppGroupdeprecatedThe dcn PPP objects.
1.3.6.1.4.1.8708.2.20.1.1.5GroupdcnPppGroupV2deprecatedThe dcn PPP objects v2.
1.3.6.1.4.1.8708.2.20.1.1.6GroupdcnAddressGroupcurrentThe general objects.
1.3.6.1.4.1.8708.2.20.1.1.7GroupdcnPppGroupV3deprecatedThe dcn PPP objects v3.
1.3.6.1.4.1.8708.2.20.1.1.8GroupdcnPppGroupV4deprecatedThe dcn PPP objects V4 (3.1).
1.3.6.1.4.1.8708.2.20.1.1.9GroupdcnGeneralGroupV2deprecatedThe general objects. (3.1)
1.3.6.1.4.1.8708.2.20.1.1.10GroupdcnIfGroupV2deprecatedThe dcn interface objects V2 (4.0).
1.3.6.1.4.1.8708.2.20.1.1.11GroupdcnPppGroupV5deprecatedThe dcn PPP objects V5 (4.0).
1.3.6.1.4.1.8708.2.20.1.1.12GroupdcnIfGroupV3deprecatedThe dcn interface objects V3 (7.0).
1.3.6.1.4.1.8708.2.20.1.1.13GroupdcnIfGroupV4deprecatedThe dcn interface objects V4 (13.0).
1.3.6.1.4.1.8708.2.20.1.1.14GroupdcnPppGroupV6deprecatedThe dcn PPP objects V6 (14.0).
1.3.6.1.4.1.8708.2.20.1.1.15GroupdcnEthGroupV1deprecatedThe dcn eth objects V1 (17.0).
1.3.6.1.4.1.8708.2.20.1.1.16GroupdcnGeneralGroupV3currentThe general objects V3 (17.0).
1.3.6.1.4.1.8708.2.20.1.1.17GroupdcnEthGroupV2deprecatedThe dcn eth objects V2 (18.0).
1.3.6.1.4.1.8708.2.20.1.1.18GroupdcnCcGroupcurrentThe dcn cc objects (26.0).
1.3.6.1.4.1.8708.2.20.1.1.19GroupdcnIfGroupV5currentThe dcn interface objects V5 (28.0).
1.3.6.1.4.1.8708.2.20.1.1.20GroupdcnPppGroupV7deprecatedThe dcn PPP objects V7 (30.0).
1.3.6.1.4.1.8708.2.20.1.1.21GroupdcnEthGroupV3currentThe dcn eth objects V3 (30.0).
1.3.6.1.4.1.8708.2.20.1.1.22GroupdcnPppGroupV8currentThe dcn PPP objects V8 (31.0).
1.3.6.1.4.1.8708.2.20.1.2NodelumDcnCompl
1.3.6.1.4.1.8708.2.20.1.2.1CompliancelumDcnBasicComplV1deprecatedBasic implementation requirements for the dcn MIB V1.
1.3.6.1.4.1.8708.2.20.1.2.2CompliancelumDcnBasicComplV2deprecatedBasic implementation requirements for the dcn MIB V2.
1.3.6.1.4.1.8708.2.20.1.2.3CompliancelumDcnBasicComplV3deprecatedBasic implementation requirements for the dcn MIB V3.
1.3.6.1.4.1.8708.2.20.1.2.4CompliancelumDcnBasicComplV4deprecatedBasic implementation requirements for the dcn MIB V4.
1.3.6.1.4.1.8708.2.20.1.2.5CompliancelumDcnBasicComplV5deprecatedBasic implementation requirements for the dcn MIB V5 (3.0).
1.3.6.1.4.1.8708.2.20.1.2.6CompliancelumDcnBasicComplV6deprecatedBasic implementation requirements for the dcn MIB V6 (3.1).
1.3.6.1.4.1.8708.2.20.1.2.7CompliancelumDcnBasicComplV7deprecatedBasic implementation requirements for the dcn MIB V6 (4.0).
1.3.6.1.4.1.8708.2.20.1.2.8CompliancelumDcnBasicComplV8deprecatedBasic implementation requirements for the dcn MIB V7 (7.0).
1.3.6.1.4.1.8708.2.20.1.2.9CompliancelumDcnBasicComplV9deprecatedBasic implementation requirements for the dcn MIB V8 (13.0).
1.3.6.1.4.1.8708.2.20.1.2.10CompliancelumDcnBasicComplV10deprecatedBasic implementation requirements for the dcn MIB V9 (14.0).
1.3.6.1.4.1.8708.2.20.1.2.11CompliancelumDcnBasicComplV11deprecatedBasic implementation requirements for the dcn MIB V10 (17.0).
1.3.6.1.4.1.8708.2.20.1.2.12CompliancelumDcnBasicComplV12deprecatedBasic implementation requirements for the dcn MIB V10 (17.0).
1.3.6.1.4.1.8708.2.20.1.2.13CompliancelumDcnBasicComplV13deprecatedBasic implementation requirements for the dcn MIB V13 (26.0).
1.3.6.1.4.1.8708.2.20.1.2.14CompliancelumDcnBasicComplV14deprecatedBasic implementation requirements for the dcn MIB V14 (28.0).
1.3.6.1.4.1.8708.2.20.1.2.15CompliancelumDcnBasicComplV15deprecatedBasic implementation requirements for the dcn MIB V15 (30.0).
1.3.6.1.4.1.8708.2.20.1.2.16CompliancelumDcnBasicComplV16deprecatedBasic implementation requirements for the dcn MIB V16 (30.1).
1.3.6.1.4.1.8708.2.20.1.2.17CompliancelumDcnBasicComplV17currentBasic implementation requirements for the dcn MIB V17 (31.0).
1.3.6.1.4.1.8708.2.20.2NodelumDcnMIBObjects
1.3.6.1.4.1.8708.2.20.2.1NodedcnGeneral
1.3.6.1.4.1.8708.2.20.2.1.1ScalardcnGeneralLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.20.2.1.2ScalardcnGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.20.2.1.3ScalardcnGeneralDcnIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.20.2.1.4ScalardcnGeneralDcnPppTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.20.2.1.5ScalardcnGeneralDcnEthTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.20.2.1.6ScalardcnGeneralDcnCcTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.20.2.2NodedcnIfList
1.3.6.1.4.1.8708.2.20.2.2.1TabledcnIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.20.2.2.1.1RowdcnIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.20.2.2.1.1.1ColumndcnIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.20.2.2.1.1.2ColumndcnIfNameread-onlycurrentThe management name of the interface, for example 'osc:1:1:1-2', where the first number indicates sub-rack, the second slot number and the third is the port nu…
1.3.6.1.4.1.8708.2.20.2.2.1.1.3ColumndcnIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.20.2.2.1.1.4ColumndcnIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.20.2.2.1.1.5ColumndcnIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.20.2.2.1.1.6ColumndcnIfTxPortread-onlycurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.20.2.2.1.1.7ColumndcnIfRxPortread-onlycurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.20.2.2.1.1.8ColumndcnIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.20.2.2.1.1.9ColumndcnIfTyperead-onlycurrentThe expected signal type.
1.3.6.1.4.1.8708.2.20.2.2.1.1.10ColumndcnIfMaxSpeedread-onlycurrentThe expected signal bit rate in units of 1,000,000 bits (Mb) per second.
1.3.6.1.4.1.8708.2.20.2.2.1.1.11ColumndcnIfOscModeread-writecurrentThe usage mode for the OSC channel icn - Used for node internal communication dcn - Used for external communication (main CU only) customer - Used for customer…
1.3.6.1.4.1.8708.2.20.2.2.1.1.12ColumndcnIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.20.2.2.1.1.13ColumndcnIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventi…
1.3.6.1.4.1.8708.2.20.2.2.1.1.14ColumndcnIfTxSignalStatusread-onlycurrentThe operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.20.2.2.1.1.15ColumndcnIfLinkDownread-onlycurrentA: Failure to negotiate a connection with the other party. D: A connection is negotiated.
1.3.6.1.4.1.8708.2.20.2.2.1.1.16ColumndcnIfTxFrequencyread-onlycurrentThe transmitted frequency given.
1.3.6.1.4.1.8708.2.20.2.2.1.1.17ColumndcnIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.20.2.2.1.1.18ColumndcnIfLaserStatusread-onlycurrentThe operational state of the TX-side laser. off - The laser is turned off. on - The laser is turned on.
1.3.6.1.4.1.8708.2.20.2.2.1.1.19ColumndcnIfPowerLevelread-onlycurrentThe received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.20.2.2.1.1.20ColumndcnIfTxPowerLevelread-onlycurrentThe transmitted power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.20.2.2.1.1.21ColumndcnIfReceiverSensitivityread-onlycurrentThe lowest power that the receiver is guaranteed to handle, in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.20.2.2.1.1.22ColumndcnIfPowerLevelLowRelativeThresholdread-writecurrentThe lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity.
1.3.6.1.4.1.8708.2.20.2.2.1.1.23ColumndcnIfLaserTempActualread-onlycurrentThe actual laser temperature in units of 0.1 degrees centigrade.
1.3.6.1.4.1.8708.2.20.2.2.1.1.24ColumndcnIfTrxClassread-onlycurrentString that describes the transceiver class.
1.3.6.1.4.1.8708.2.20.2.2.1.1.25ColumndcnIfHighSpeedMinread-onlycurrentThe minmum speed in units of 1,000,000 bits (Mb) per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of…
1.3.6.1.4.1.8708.2.20.2.2.1.1.26ColumndcnIfHighSpeedMaxread-onlycurrentThe maximum speed in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-…
1.3.6.1.4.1.8708.2.20.2.2.1.1.27ColumndcnIfExpectedTxFrequencyread-writecurrentThe expected frequency given in hundreds of GHz (0.01 GHz).
1.3.6.1.4.1.8708.2.20.2.2.1.1.28ColumndcnIfLaserBiasread-onlycurrentMeasures laser bias current value in tenths of mA (0.1 mA).
1.3.6.1.4.1.8708.2.20.2.2.1.1.29ColumndcnIfLossOfSignalread-onlycurrentLoss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.20.2.2.1.1.30ColumndcnIfTrxCodeMismatchread-onlycurrentThe inserted transceiver does not have a legal manufacturer code. A: A transceiver with illegal code is inserted. D: The transceiver with illegal code is remov…
1.3.6.1.4.1.8708.2.20.2.2.1.1.31ColumndcnIfTrxBitrateUnavailableread-onlycurrentThe inserted transceiver does not support the requested bit rate. A: A transceiver with other supported bit rate than the requested bit rate is inserted. D: Th…
1.3.6.1.4.1.8708.2.20.2.2.1.1.32ColumndcnIfTrxMissingread-onlycurrentAn expected transceiver is missing. A: An expected transceiver is missing. D: The missing transceiver is inserted.
1.3.6.1.4.1.8708.2.20.2.2.1.1.33ColumndcnIfTransmitterFailedread-onlycurrentThe transceiver HW has detected a failure in the transmitter part. A: The transmitter has failed D: The transmitter is OK again
1.3.6.1.4.1.8708.2.20.2.2.1.1.34ColumndcnIfIllegalFrequencyread-onlycurrentThe frequency supported by the transceiver is not recognized by the system. A: Invalid or unknown frequency information is detected in the (pluggable) transcei…
1.3.6.1.4.1.8708.2.20.2.2.1.1.35ColumndcnIfUnexpectedTxFrequencyread-onlycurrentThe actual frequency does not match the pre-configured frequency. A pre-configured frequency of '0' matches all actual frequencies. A: The configured frequency…
1.3.6.1.4.1.8708.2.20.2.2.1.1.36ColumndcnIfReceivedPowerHighread-onlycurrentReceived power level is too high. Applicable for all signal formats. A: The received power level exceeds the the built-in overload threshold. D: The received p…
1.3.6.1.4.1.8708.2.20.2.2.1.1.37ColumndcnIfReceivedPowerLowread-onlycurrentReceived power level low threshold exceeded. Applicable for all signal formats. A: The received power level is below the associated threshold. D: The received …
1.3.6.1.4.1.8708.2.20.2.2.1.1.38ColumndcnIfTrxMediaMismatchread-onlycurrentThe TRX media does not match the expected one. A: Invalid or mismatching trx media is detected. D: The (pluggable) transceiver or board is replaced, or the con…
1.3.6.1.4.1.8708.2.20.2.2.1.1.39ColumndcnIfProtocolVersionMismatchread-onlycurrentThe peer interfaces uses different versions of the communication protocol. A: Incoming messages have the wrong version D: Incoming messages have the expected v…
1.3.6.1.4.1.8708.2.20.2.2.1.1.40ColumndcnIfRemoteDefectIndicationread-onlycurrentThe remote interfaces signals failures on the received signal. A: The remote interface signals failure D: The remote interface does not signal failure
1.3.6.1.4.1.8708.2.20.2.2.1.1.41ColumndcnIfTraceTransmittedread-writecurrentThe trace identifier to be transmitted from this interface. Set to empty string for default value: <IP address>:<subrack>:<slot>:<port> Note that only the last…
1.3.6.1.4.1.8708.2.20.2.2.1.1.42ColumndcnIfTraceReceivedread-onlycurrentThe received trace identifier for this interface.
1.3.6.1.4.1.8708.2.20.2.2.1.1.43ColumndcnIfTraceExpectedread-writecurrentTrace identifier used for matching against the received trace identifier.
1.3.6.1.4.1.8708.2.20.2.2.1.1.44ColumndcnIfTraceAlarmModeread-writecurrentControls if the trace identifier mismatch alarm should be raised. disabled - The alarm is disabled. enabled - The alarm is raised if expected trace identifier …
1.3.6.1.4.1.8708.2.20.2.2.1.1.55ColumndcnIfTraceMismatchread-onlycurrentIndicates if the expected trace identifier differs from the received trace identifier. A: The received trace identifier differs from the expected trace identif…
1.3.6.1.4.1.8708.2.20.2.2.1.1.56ColumndcnIfLaserModeread-writecurrentThe administrative state of the TX-side laser on - The laser is turned on. als - Automatic Laser Shutdown/Turn-Off when lossOfSignal is detected on the RX side…
1.3.6.1.4.1.8708.2.20.2.2.1.1.57ColumndcnIfLinkSupervisionFailureread-onlycurrentThe supervision procedure of the protection link failed. A: The protection board loses contact with its peer D: The contact is re-established
1.3.6.1.4.1.8708.2.20.2.2.1.1.58ColumndcnIfAidread-onlycurrentThe access identifier (AID) of the interface. The format is according to GR-833.
1.3.6.1.4.1.8708.2.20.2.2.1.1.59ColumndcnIfPhysicalLocationread-onlycurrentThe physical location of the if. The format is according to GR-833.
1.3.6.1.4.1.8708.2.20.2.3NodelumentisDcnNotifications
1.3.6.1.4.1.8708.2.20.2.3.0NodedcnNotifyPrefix
1.3.6.1.4.1.8708.2.20.2.3.0.1NotificationdcnIfTxSignalStatusDowncurrentSent when the signal status attribute of an interface changes.
1.3.6.1.4.1.8708.2.20.2.3.0.2NotificationdcnIfTxSignalStatusUpcurrentSent when the signal status attribute of an interface changes.
1.3.6.1.4.1.8708.2.20.2.4NodedcnPppList
1.3.6.1.4.1.8708.2.20.2.4.1TabledcnPppTablenot-accessiblecurrentThe PPP list.
1.3.6.1.4.1.8708.2.20.2.4.1.1RowdcnPppEntrynot-accessiblecurrentAn entry in the PPP list.
1.3.6.1.4.1.8708.2.20.2.4.1.1.1ColumndcnPppIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.20.2.4.1.1.2ColumndcnPppNameread-onlycurrentThe management name of the PPP link, for example 'ppp:1:2:3-4', meaning ports 3 and 4 on the board in subrack 1, slot 2.
1.3.6.1.4.1.8708.2.20.2.4.1.1.3ColumndcnPppDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.20.2.4.1.1.4ColumndcnPppTxSubrackread-createcurrentThe number of the subrack where the TX side of the PPP link is located.
1.3.6.1.4.1.8708.2.20.2.4.1.1.5ColumndcnPppTxSlotread-createcurrentThe number of the slot where the TX side of the PPP link is located.
1.3.6.1.4.1.8708.2.20.2.4.1.1.6ColumndcnPppTxPortread-createcurrentThe number of the port where the TX side of the PPP link is located.
1.3.6.1.4.1.8708.2.20.2.4.1.1.7ColumndcnPppRxSubrackread-createcurrentThe number of the subrack where the RX side of the PPP link is located.
1.3.6.1.4.1.8708.2.20.2.4.1.1.8ColumndcnPppRxSlotread-createcurrentThe number of the slot where the RX side of the PPP link is located.
1.3.6.1.4.1.8708.2.20.2.4.1.1.9ColumndcnPppRxPortread-createcurrentThe number of the port where the RX-side of the PPP link is located.
1.3.6.1.4.1.8708.2.20.2.4.1.1.10ColumndcnPppInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.20.2.4.1.1.11ColumndcnPppTyperead-onlycurrentThe expected signal type.
1.3.6.1.4.1.8708.2.20.2.4.1.1.12ColumndcnPppAdminStatusread-writecurrentThe administrative state for the PPP link. down - The PPP link should be inactive. service - The interface is activated but alarms are suppressed. Intended for…
1.3.6.1.4.1.8708.2.20.2.4.1.1.13ColumndcnPppOperStatusread-onlycurrentThe operational state for the PPP link. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventin…
1.3.6.1.4.1.8708.2.20.2.4.1.1.14ColumndcnPppRouteNameread-onlycurrentThe Linux name of the PPP link, for example 'p1-1-1-1-2', where the first number indicates subrack, the second and third is slot and port number for the TX sid…
1.3.6.1.4.1.8708.2.20.2.4.1.1.15ColumndcnPppDialCommandread-onlycurrentCommand to dial up the remote node to enable PPP link
1.3.6.1.4.1.8708.2.20.2.4.1.1.16ColumndcnPppAcceptCommandread-onlycurrentAccept a PPP object that has been created by a dial up command from the remote node. Accepting the object will make it persistent, otherwise it will not be sav…
1.3.6.1.4.1.8708.2.20.2.4.1.1.17ColumndcnPppLogicalLinkIdread-createcurrentThis attribute is settable only on ppp links terminated on a specific type of boards. Namely, traffic units that may terminate more than one ppp-link. The tric…
1.3.6.1.4.1.8708.2.20.2.4.1.1.18ColumndcnPppObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.20.2.4.1.1.19ColumndcnPppGccChannelread-createcurrentThe chosen Gcc channel used for PPP link. Valid values for the user to set is 0, 1 or 2.
1.3.6.1.4.1.8708.2.20.2.4.1.1.20ColumndcnPppVlanIdread-createcurrentVLAN ID when the PPP-link is carried on a VLAN. 0 if link is not carried by a VLAN.
1.3.6.1.4.1.8708.2.20.2.4.1.1.21ColumndcnPppVlanEtherTyperead-writecurrentSpecifies the ether type of the VLAN. qTag0x8100 - 802.1Q sTag0x88a8 - 802.1ad Service tag
1.3.6.1.4.1.8708.2.20.2.4.1.1.22ColumndcnPppTxIfNoread-createcurrentThe number of the interface where the TX side of the PPP link is located.
1.3.6.1.4.1.8708.2.20.2.4.1.1.23ColumndcnPppRxIfNoread-createcurrentThe number of the interface where the RX side of the PPP link is located.
1.3.6.1.4.1.8708.2.20.2.5NodedcnAddress
1.3.6.1.4.1.8708.2.20.2.5.1ScalardcnAddressCurrentPppAddressread-onlycurrentThe IP address associated with the PPP i/fs If set to empty-string, then the IP-address of eth1 is used. Updating this variable requires a restart of the syste…
1.3.6.1.4.1.8708.2.20.2.5.2ScalardcnAddressNextPppAddressread-writecurrentThe IP address to be used for the PPP i/fs after the next restart. Updating this variable requires a restart of the system.
1.3.6.1.4.1.8708.2.20.2.6NodedcnEthList
1.3.6.1.4.1.8708.2.20.2.6.1TabledcnEthTablenot-accessiblecurrentThe ETH table spcifies information for configurating the dcn ports.
1.3.6.1.4.1.8708.2.20.2.6.1.1RowdcnEthEntrynot-accessiblecurrentAn entry in the ETH list. Each entry represents a physical dcn port.
1.3.6.1.4.1.8708.2.20.2.6.1.1.1ColumndcnEthIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.20.2.6.1.1.2ColumndcnEthNameread-onlycurrentThe management name of the ETH link, for example 'eth:2:1:3', meaning dcn port 3 on the board in subrack 2, slot 1.
1.3.6.1.4.1.8708.2.20.2.6.1.1.3ColumndcnEthDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.20.2.6.1.1.4ColumndcnEthSubrackread-onlycurrentThe number of the subrack where the ETH link is located.
1.3.6.1.4.1.8708.2.20.2.6.1.1.5ColumndcnEthSlotread-onlycurrentThe number of the slot where the ETH link is located.
1.3.6.1.4.1.8708.2.20.2.6.1.1.6ColumndcnEthPortread-onlycurrentThe number of the port where the ETH link is located.
1.3.6.1.4.1.8708.2.20.2.6.1.1.7ColumndcnEthAutoNegotiationModeread-createcurrentThe wanted auto negotiation mode. off - auto negotiation process is disabled not possible to set off when speed or duplex is set to both on - auto negotiation …
1.3.6.1.4.1.8708.2.20.2.6.1.1.8ColumndcnEthLinkStatusread-onlycurrentThe status of the link
1.3.6.1.4.1.8708.2.20.2.6.1.1.9ColumndcnEthSpeedread-createcurrentThe expected speed of the dcn port. mbps10 - 10 Mbps mbps100 - 100 Mbps mbps1000 - 1000 Mbps auto - Autodetect what speed to use not possible to set auto when …
1.3.6.1.4.1.8708.2.20.2.6.1.1.10ColumndcnEthDuplexCapabilityread-createcurrentThe expected duplex capability. half - supports half duplex full - supports full duplex both - supports both half and full duplex not possible to set both when…
1.3.6.1.4.1.8708.2.20.2.6.1.1.11ColumndcnEthRateLimitread-writecurrentRate limit in steps of 0.08 Mb/s if 10 Mb/s link speed, 0.8 Mb/s if 100 Mb/s link speed and 8 Mb/s if 1000 Mb/s link speed. Frames above the limit are dropped.…
1.3.6.1.4.1.8708.2.20.2.6.1.1.12ColumndcnEthFlowControlModeread-writecurrentThe mode for handling of pause messages between the peers. noPause - PAUSE frame reception and transmission is disabled rxPause - PAUSE frame reception is enab…
1.3.6.1.4.1.8708.2.20.2.6.1.1.13ColumndcnEthObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.20.2.6.1.1.15ColumndcnEthChangeSpeedCommandread-onlycurrentCommand to change speed, autonegotiation mode and duplex capability.
1.3.6.1.4.1.8708.2.20.2.6.1.1.16ColumndcnEthAdminStatusread-writecurrentThe administrative state for the ethernet port. down - The interface should be inactive. up - The interface should be activated when it becomes available. Alar…
1.3.6.1.4.1.8708.2.20.2.6.1.1.17ColumndcnEthOperStatusread-onlycurrentThe operational state for the ethernet interface. down - The interface is de-activated or the are faults preventing it from going to the 'up'-state. up - The i…
1.3.6.1.4.1.8708.2.20.2.7NodedcnCcList
1.3.6.1.4.1.8708.2.20.2.7.1TabledcnCcTablenot-accessiblecurrentThe cc list.
1.3.6.1.4.1.8708.2.20.2.7.1.1RowdcnCcEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.20.2.7.1.1.1ColumndcnCcIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.20.2.7.1.1.2ColumndcnCcNameread-onlycurrentThe management name of the communication channel interface, for example 'line:1:1:1-2', where the first number indicates subrack, the second slot number and th…
1.3.6.1.4.1.8708.2.20.2.7.1.1.3ColumndcnCcDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.20.2.7.1.1.4ColumndcnCcSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.20.2.7.1.1.5ColumndcnCcSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.20.2.7.1.1.6ColumndcnCcTxPortread-onlycurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.20.2.7.1.1.7ColumndcnCcRxPortread-onlycurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.20.2.7.1.1.8ColumndcnCcAdminStatusread-writecurrentThe administrative state for the communication channel link. down - The communication channel link should be inactive. service - The link is activated but alar…
1.3.6.1.4.1.8708.2.20.2.7.1.1.9ColumndcnCcChannelStatusread-onlycurrentStatus of the communication channel. NotPresent - The HW (board) is not in place to execute the function. Down - Admin is Down and a incoming communication cha…
1.3.6.1.4.1.8708.2.20.2.7.1.1.10ColumndcnCcErrorCounterread-onlycurrentThe counter associated FEC errors of the management channel. The errors are accumulated since last reset.
1.3.6.1.4.1.8708.2.20.2.7.1.1.11ColumndcnCcResetCounterread-writecurrentReset the error counter to 0.
1.3.6.1.4.1.8708.2.20.2.7.1.1.12ColumndcnCcFecFailureread-onlycurrentFEC failure
1.3.6.1.4.1.8708.2.20.2.7.1.1.13ColumndcnCcTrxNotSupportCommChannelread-onlycurrentTrx does not support communication channel The inserted transceiver does not support usage of communication channel. Alarm - The transceiver does not support u…
1.3.6.1.4.1.8708.2.20.2.7.1.1.14ColumndcnCcConfigurationMismatchread-onlycurrentCommunication channel configuration mismatch Local communication channel is configured, but the remote side sends enabled=False. This mismatch must be persiste…
Type Definitions
NameSyntaxStatusDescription
DcnOscModeINTEGER { icn (0), dcn (1), customer (2), mixed (3), unused (4), lan (5), customerOpto (6), mixedOpto (7) }currentThe usage mode of the OSC channel.
DcnSignalTypeINTEGER { undefined (0), electrical (1), optical (2) }currentSignal format for DCN interfaces.