MIB Viewer

LUM-ETH-MIB

74 objects
The ethernet client interface MIB. - General - Ethernet client interfaces
Imported Objects
LUM-REGlumEthMIB lumModules
LUM-TCBoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus FaultStatus MgmtNameString ObjectProperty PortNumber SlotNumber SubrackNumber
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIGauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.19IdentitylumEthMIBModuleThe ethernet client interface MIB. - General - Ethernet client interfaces
1.3.6.1.4.1.8708.2.18.1NodelumEthConfs
1.3.6.1.4.1.8708.2.18.1.1NodelumEthGroups
1.3.6.1.4.1.8708.2.18.1.1.1GroupethGeneralGroupdeprecatedThe general objects.
1.3.6.1.4.1.8708.2.18.1.1.2GroupethIfGroupdeprecatedThe eth interface objects.
1.3.6.1.4.1.8708.2.18.1.1.3GroupethNotificationGroupdeprecatedThe eth notifications.
1.3.6.1.4.1.8708.2.18.1.1.4GroupethIfGroupV2deprecatedThe eth interface objects v2.
1.3.6.1.4.1.8708.2.18.1.1.5GroupethIfGroupV3deprecatedThe eth interface objects v3.
1.3.6.1.4.1.8708.2.18.1.1.6GroupethNotificationGroupV2currentThe eth notifications.
1.3.6.1.4.1.8708.2.18.1.1.7GroupethIfGroupV4deprecatedThe eth interface objects v4 (3.0).
1.3.6.1.4.1.8708.2.18.1.1.8GroupethGeneralGroupV2currentThe general objects. (3.1)
1.3.6.1.4.1.8708.2.18.1.1.9GroupethIfGroupV5deprecatedThe eth interface objects v5 (3.1).
1.3.6.1.4.1.8708.2.18.1.1.10GroupethIfGroupV6currentThe eth interface objects v6 (4.0).
1.3.6.1.4.1.8708.2.18.1.2NodelumEthCompl
1.3.6.1.4.1.8708.2.18.1.2.1CompliancelumEthBasicComplV1deprecatedBasic implementation requirements for the eth MIB V1.
1.3.6.1.4.1.8708.2.18.1.2.2CompliancelumEthBasicComplV2deprecatedBasic implementation requirements for the eth MIB V2.
1.3.6.1.4.1.8708.2.18.1.2.3CompliancelumEthBasicComplV3deprecatedBasic implementation requirements for the eth MIB V3.
1.3.6.1.4.1.8708.2.18.1.2.4CompliancelumEthBasicComplV4deprecatedBasic implementation requirements for the eth MIB V4 (3.0).
1.3.6.1.4.1.8708.2.18.1.2.5CompliancelumEthBasicComplV5deprecatedBasic implementation requirements for the eth MIB V5 (3.1).
1.3.6.1.4.1.8708.2.18.1.2.6CompliancelumEthBasicComplV6currentBasic implementation requirements for the eth MIB V6 (4.0).
1.3.6.1.4.1.8708.2.18.2NodelumEthMIBObjects
1.3.6.1.4.1.8708.2.18.2.1NodeethGeneral
1.3.6.1.4.1.8708.2.18.2.1.1ScalarethGeneralLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.18.2.1.2ScalarethGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.18.2.1.3ScalarethGeneralEthIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.18.2.2NodeethIfList
1.3.6.1.4.1.8708.2.18.2.2.1TableethIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.18.2.2.1.1RowethIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.18.2.2.1.1.1ColumnethIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.18.2.2.1.1.2ColumnethIfNameread-onlycurrentThe management name of the interface, for example 'eth1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port numbe…
1.3.6.1.4.1.8708.2.18.2.2.1.1.3ColumnethIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.18.2.2.1.1.4ColumnethIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.18.2.2.1.1.5ColumnethIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.18.2.2.1.1.6ColumnethIfTxPortread-onlycurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.18.2.2.1.1.7ColumnethIfRxPortread-onlycurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.18.2.2.1.1.8ColumnethIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.18.2.2.1.1.9ColumnethIfFormatread-onlycurrentThe expected signal format. The default value is board dependent. For information about the default value for this particular board, please refer to the user m…
1.3.6.1.4.1.8708.2.18.2.2.1.1.10ColumnethIfHighSpeedread-onlycurrentThe expected signal bit rate in units of 1,000,000 bits (Mb) per second.
1.3.6.1.4.1.8708.2.18.2.2.1.1.11ColumnethIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.18.2.2.1.1.12ColumnethIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventi…
1.3.6.1.4.1.8708.2.18.2.2.1.1.13ColumnethIfLaserStatusread-onlycurrentThe operational state of the laser. off - The laser is turned off. on - The laser is turned on.
1.3.6.1.4.1.8708.2.18.2.2.1.1.14ColumnethIfTxSignalStatusread-onlycurrentThe operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.18.2.2.1.1.15ColumnethIfAutoNegotiationModeread-writecurrentThe wanted auto negotiation mode. off - auto negotiation process is disabled on - auto negotiation process is enabled
1.3.6.1.4.1.8708.2.18.2.2.1.1.16ColumnethIfAutoNegotiationStatusread-onlycurrentThe result of the auto negotiation procedure incomplete - the result is still pending half - half duplex full - full duplex
1.3.6.1.4.1.8708.2.18.2.2.1.1.17ColumnethIfDuplexCapabilityread-onlycurrentThe duplex capability of the HW. half - supports half duplex full - supports full duplex
1.3.6.1.4.1.8708.2.18.2.2.1.1.18ColumnethIfFlowControlModeread-writecurrentThe mode for handling of pause messages between the peers. noPause - PAUSE frame reception and transmission is disabled rxPause - PAUSE frame reception is enab…
1.3.6.1.4.1.8708.2.18.2.2.1.1.19ColumnethIfInterPacketGapread-writecurrentTime between the frames in nano seconds. Legal values are 72, 80, ... 200, 320, 328, 336, ... 456
1.3.6.1.4.1.8708.2.18.2.2.1.1.20ColumnethIfFrameSizeread-writecurrentThe maximum size of the transmitted and received frames (in bytes).
1.3.6.1.4.1.8708.2.18.2.2.1.1.21ColumnethIfPowerLevelread-onlycurrentThe received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.18.2.2.1.1.22ColumnethIfPowerLevelHighThresholdread-writedeprecatedThe upper threshold for received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.18.2.2.1.1.23ColumnethIfPowerLevelLowThresholdread-writedeprecatedThe lower threshold for received power level in units of 0.1 dBm.
1.3.6.1.4.1.8708.2.18.2.2.1.1.24ColumnethIfLaserBiasread-onlycurrentMeasures laser bias current value in tenths of mA (0.1 mA).
1.3.6.1.4.1.8708.2.18.2.2.1.1.25ColumnethIfLaserBiasThresholdread-writecurrentSets the threshold for the laser bias alarm. in percentage relative to the value set during production. The preset value is 100%.
1.3.6.1.4.1.8708.2.18.2.2.1.1.26ColumnethIfLossOfSignalread-onlycurrentLoss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.18.2.2.1.1.27ColumnethIfReceivedPowerHighread-onlycurrentReceived power level high threshold exceeded. A: The received power level exceeds the associated threshold. D: The received power level is 0.5 dB below the thr…
1.3.6.1.4.1.8708.2.18.2.2.1.1.28ColumnethIfReceivedPowerLowread-onlycurrentReceived power level low threshold exceeded. A: The received power level is below the associated threshold. D: The received power level is 0.5 dB above the thr…
1.3.6.1.4.1.8708.2.18.2.2.1.1.29ColumnethIfLaserBiasHighread-onlycurrentLaser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated thresh…
1.3.6.1.4.1.8708.2.18.2.2.1.1.30ColumnethIfLossOfSyncread-onlycurrentLoss of sync. A: GbE 'frame' can not be located. D: GbE 'frame' is located.
1.3.6.1.4.1.8708.2.18.2.2.1.1.31ColumnethIfBitrateMismatchread-onlycurrentBitrate mismatch. A: The interface is unable to lock to the inserted signal. D: The interface is able to lock to the inserted signal.
1.3.6.1.4.1.8708.2.18.2.2.1.1.32ColumnethIfLinkDownread-onlycurrentA: Failure to negotiate a connection with the other party. D: A connection is negotiated.
1.3.6.1.4.1.8708.2.18.2.2.1.1.33ColumnethIfAuAlarmIndicationSignalW2Cread-onlycurrentPayload Alarm indication signal (AIS) on the trunk-side. A: An 'all ones' SDH signal is detected. D: SDH signal recovered.
1.3.6.1.4.1.8708.2.18.2.2.1.1.34ColumnethIfForwardAlsread-writecurrentForward Automatic Laser Shut-down. Decides the behaviour of the client laser (W2C) when the trunc signal is defected. disabled - The laser is NOT turned off at…
1.3.6.1.4.1.8708.2.18.2.2.1.1.35ColumnethIfSuppressRemoteAlarmsread-writecurrentSuppress AIS in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms are suppresse…
1.3.6.1.4.1.8708.2.18.2.2.1.1.36ColumnethIfFarEndLoopbackread-writecurrentLoop the client TX signal back to the client RX. disabled - the signal is not looped enabled - the signal is looped.
1.3.6.1.4.1.8708.2.18.2.2.1.1.37ColumnethIfEntityIdread-onlycurrentIndex in entity table.
1.3.6.1.4.1.8708.2.18.2.2.1.1.38ColumnethIfGbeUtilizationread-onlycurrentShows a snapshot of the current bandwidth utilization of the GbE signal during the last second. It is expressed in per cent of 1 Gbps
1.3.6.1.4.1.8708.2.18.2.2.1.1.39ColumnethIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.18.2.2.1.1.40ColumnethIfPowerLevelLowRelativeThresholdread-writecurrentThe lower threshold for received power level in units of 0.1 dB, relative to the receiver sensitivity.
1.3.6.1.4.1.8708.2.18.2.3NodelumentisEthNotifications
1.3.6.1.4.1.8708.2.18.2.3.0NodeethNotifyPrefix
1.3.6.1.4.1.8708.2.18.2.3.0.1NotificationethIfTxSignalStatusDowncurrentSent when the signal status attribute of an interface changes.
1.3.6.1.4.1.8708.2.18.2.3.0.2NotificationethIfTxSignalStatusUpcurrentSent when the signal status attribute of an interface changes.
1.3.6.1.4.1.8708.2.18.2.3.0.3NotificationethIfTxSignalStatusDegradedcurrentSent when the signal status attribute of an interface changes.
Type Definitions
NameSyntaxStatusDescription
EthSignalFormatINTEGER { undefined (0), gbE (1), lan10GbE (2) }currentSignal format for ethernet interfaces. gbE - Gigabit Ethernet signal lan10GbE - 10 Gigabit Ethernet LAN signal