MIB Viewer

LUM-FC-MIB

48 objects
The fiber channel client interface MIB. - General - Fiber channel client interfaces
Imported Objects
LUM-REGlumFcMIB lumModules
LUM-TCBoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus FaultStatus MgmtNameString ObjectProperty PortNumber SlotNumber SubrackNumber
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIGauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.8708.1.1.23IdentitylumFcMIBModuleThe fiber channel client interface MIB. - General - Fiber channel client interfaces
1.3.6.1.4.1.8708.2.22.1NodelumFcConfs
1.3.6.1.4.1.8708.2.22.1.1NodelumFcGroups
1.3.6.1.4.1.8708.2.22.1.1.1GroupfcGeneralGroupdeprecatedThe general objects.
1.3.6.1.4.1.8708.2.22.1.1.2GroupfcIfGroupdeprecatedThe fc interface objects.
1.3.6.1.4.1.8708.2.22.1.1.3GroupfcNotificationGroupcurrentThe fc notifications.
1.3.6.1.4.1.8708.2.22.1.1.4GroupfcGeneralGroupV2currentThe general objects.
1.3.6.1.4.1.8708.2.22.1.1.5GroupfcIfGroupV2currentThe fc interface objects (4.0).
1.3.6.1.4.1.8708.2.22.1.2NodelumFcCompl
1.3.6.1.4.1.8708.2.22.1.2.1CompliancelumFcBasicComplV1deprecatedBasic implementation requirements for the fc MIB V1.
1.3.6.1.4.1.8708.2.22.1.2.2CompliancelumFcBasicComplV2deprecatedBasic implementation requirements for the fc MIB V2. (3.1)
1.3.6.1.4.1.8708.2.22.1.2.3CompliancelumFcBasicComplV3currentBasic implementation requirements for the fc MIB V2. (4.0)
1.3.6.1.4.1.8708.2.22.2NodelumFcMIBObjects
1.3.6.1.4.1.8708.2.22.2.1NodefcGeneral
1.3.6.1.4.1.8708.2.22.2.1.1ScalarfcGeneralLastChangeTimeread-onlycurrentThe time when the configuration of the MIB was last changed.
1.3.6.1.4.1.8708.2.22.2.1.2ScalarfcGeneralStateLastChangeTimeread-onlycurrentThe time when the state of the MIB was last changed.
1.3.6.1.4.1.8708.2.22.2.1.3ScalarfcGeneralFcIfTableSizeread-onlycurrentSize of table
1.3.6.1.4.1.8708.2.22.2.2NodefcIfList
1.3.6.1.4.1.8708.2.22.2.2.1TablefcIfTablenot-accessiblecurrentThe interface list.
1.3.6.1.4.1.8708.2.22.2.2.1.1RowfcIfEntrynot-accessiblecurrentAn entry in the interface list.
1.3.6.1.4.1.8708.2.22.2.2.1.1.1ColumnfcIfIndexread-onlycurrentAn arbitrary index assigned to each entry.
1.3.6.1.4.1.8708.2.22.2.2.1.1.2ColumnfcIfNameread-onlycurrentThe management name of the interface, for example 'fc:1:2:1', where the first number indicates sub-rack, the second slot number and the third is the port numbe…
1.3.6.1.4.1.8708.2.22.2.2.1.1.3ColumnfcIfDescrread-writecurrentUser configurable label.
1.3.6.1.4.1.8708.2.22.2.2.1.1.4ColumnfcIfSubrackread-onlycurrentThe number of the subrack where the interface is located.
1.3.6.1.4.1.8708.2.22.2.2.1.1.5ColumnfcIfSlotread-onlycurrentThe number of the slot where the interface is located.
1.3.6.1.4.1.8708.2.22.2.2.1.1.6ColumnfcIfTxPortread-onlycurrentThe number of the port where the TX-side of the interface is located.
1.3.6.1.4.1.8708.2.22.2.2.1.1.7ColumnfcIfRxPortread-onlycurrentThe number of the port where the RX-side of the interface is located.
1.3.6.1.4.1.8708.2.22.2.2.1.1.8ColumnfcIfInvPhysIndexOrZeroread-onlycurrentThe row in the invPhysTable for this interface. Set to 0 if not known.
1.3.6.1.4.1.8708.2.22.2.2.1.1.9ColumnfcIfFormatread-onlycurrentThe expected signal format.
1.3.6.1.4.1.8708.2.22.2.2.1.1.10ColumnfcIfHighSpeedread-onlycurrentThe expected signal bit rate in units of 1,000,000 bits (Mb) per second.
1.3.6.1.4.1.8708.2.22.2.2.1.1.11ColumnfcIfAdminStatusread-writecurrentThe administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended f…
1.3.6.1.4.1.8708.2.22.2.2.1.1.12ColumnfcIfOperStatusread-onlycurrentThe operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventi…
1.3.6.1.4.1.8708.2.22.2.2.1.1.13ColumnfcIfLaserStatusread-onlycurrentThe operational state of the laser. off - The laser is turned off. on - The laser is turned on.
1.3.6.1.4.1.8708.2.22.2.2.1.1.14ColumnfcIfTxSignalStatusread-onlycurrentThe operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal qual…
1.3.6.1.4.1.8708.2.22.2.2.1.1.15ColumnfcIfLossOfSignalread-onlycurrentLoss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
1.3.6.1.4.1.8708.2.22.2.2.1.1.16ColumnfcIfLossOfSyncread-onlycurrentLoss of sync. A: FC 'frame' can not be located. D: FC 'frame' is located.
1.3.6.1.4.1.8708.2.22.2.2.1.1.17ColumnfcIfAuAlarmIndicationSignalW2Cread-onlycurrentAlarm Indication Signal in the direction WDM to Client. A(ctivation): AIS detected in the WDM signal for this channel. D(e-activation): No AIS detected for thi…
1.3.6.1.4.1.8708.2.22.2.2.1.1.18ColumnfcIfForwardAlsread-writecurrentForward Automatic Laser Shut-down. Decides the behaviour of the client laser (W2C) when the trunc signal is defected. disabled - The laser is NOT turned off at…
1.3.6.1.4.1.8708.2.22.2.2.1.1.19ColumnfcIfSuppressRemoteAlarmsread-writecurrentSuppress AIS in the alarm list. The fault status on the port object can, however, be seen. disabled - alarms are not suppressed. enabled - alarms are suppresse…
1.3.6.1.4.1.8708.2.22.2.2.1.1.20ColumnfcIfFarEndLoopbackread-writecurrentLoop the client TX signal back to the client RX. disabled - the signal is not looped enabled - the signal is looped.
1.3.6.1.4.1.8708.2.22.2.2.1.1.21ColumnfcIfEntityIdread-onlycurrentIndex in entity table.
1.3.6.1.4.1.8708.2.22.2.2.1.1.22ColumnfcIfObjectPropertyread-onlycurrentProperty mask.
1.3.6.1.4.1.8708.2.22.2.3NodelumentisFcNotifications
1.3.6.1.4.1.8708.2.22.2.3.0NodefcNotifyPrefix
1.3.6.1.4.1.8708.2.22.2.3.0.1NotificationfcIfTxSignalStatusDowncurrentSent when the signal status attribute of an interface changes.
1.3.6.1.4.1.8708.2.22.2.3.0.2NotificationfcIfTxSignalStatusUpcurrentSent when the signal status attribute of an interface changes.
1.3.6.1.4.1.8708.2.22.2.3.0.3NotificationfcIfTxSignalStatusDegradedcurrentSent when the signal status attribute of an interface changes.
Type Definitions
NameSyntaxStatusDescription
FcSignalFormatINTEGER { undefined (0), fc1Gb (1) }currentSignal format for fiber channel interfaces. fc1Gb - FIber channel 1.0625 Gbps signal